Cable Hooks Spring Steel Fasteners Supports all category 5/5e/6, fiber optic, innerduct and low voltage cabling requirements Finish is Pre-Galvanized Steel Exclusive Qwik-Latch cable retainers provide secure containment of cables and are included in each box of cable hooks Quick open and close design for adding and removing cable runs Plenum-rated Qwik-Latch is more economical than plenum-rated cable ties BCH12 BCH21 BCH32 BCH64 Bendable Retaining Tab Patent #5961081 Part Number Hook Size Capacity Wt. Per 100 BCH12 3/4 (19.0) 16 4-Pair UTP 7.0 (3.2) BCH21 1 5 /16 (33.3) 50 4-Pair UTP 15.4 (7.0) BCH32 2 (50.8) 80 4-Pair UTP 20.6 (9.3) BCH64 4 (101.6) 300 4-Pair UTP 56.0 (25.4) Painted Cable Hooks Powder coated cable hooks are available in a range of colors to help meet your cable identification requirements. Standard riveted assemblies are available with painted cable hooks. Part numbers can be made by adding the paint color suffix after the cable hook part number Minimum order quantity 500 pieces. Standard lead time is 5-10 working days. Colors Bright White - BW Green - GR Brown - BR Orange - OR Computer White - CW Regal Red - RR Equipment Blue - BL Safety Yellow - YL Flat Black - FB Telcom Gray - TG Part # Example: Painted Cable Hook Part Number - BCH32BW Painted Cable Hook Assembly - BCH32BW-U24 195
Cable To Beam Fasteners Permits fast and easy installation on beam flanges Simply installed with a hammer BCH12-U-2-4 3/4 (19.0) 1/8 to 1 /4 (3.2 to 6.3) 35.0 (15.9) BCH12-U-5-8 3/4 (19.0) 5/16 to 1 /2 (7.9 to 12.7) 36.0 (16.3) BCH12-U-9-12 3/4 (19.0) 9/16 to 3 /4 (14.3to 19.0) 37.0 (16.8) BCH21-U-2-4 * 1 5 /16 (33.3) 1/8 to 1 /4 (3.2 to 6.3) 40.4 (18.3) BCH21-U-5-8 * 1 5 /16 (33.3) 5/16 to 1 /2 (7.9 to 12.7) 40.2 (18.2) BCH21-U-9-12 * 1 5 /16 (33.3) 9/16 to 3 /4 (14.3to 19.0) 42.6 (19.3) BCH32-U-2-4 * 2 (50.8) 1/8 to 1 /4 (3.2 to 6.3) 44.6 (20.2) BCH32-U-5-8 * 2 (50.8) 5/16 to 1 /2 (7.9 to 12.7) 46.4 (21.0) BCH32-U-9-12 * 2 (50.8) 9/16 to 3 /4 (14.3to 19.0) 46.8 (21.2) BCH64-U-2-4 * 4 (101.6) 1/8 to 1 /4 (3.2 to 6.3) 98.0 (44.4) BCH64-U-5-8 * 4 (101.6) 5/16 to 1 /2 (7.9 to 12.7) 96.0 (43.5) BCH64-U-9-12 * 4 (101.6) 9/16 to 3 /4 (14.3to 19.0) 97.2 (44.1) Allows 360 Rotation * For Xylan coating, add X after cable hook part number. Ex: BCH32X-U-5-8 Cable To Beam Fasteners Permits fast and easy installation on beam flanges Simply installed with a hammer BCH12-E-2-4 3/4 (19.0) 1/8 to 1 /4 (3.2 to 6.3) 11.0 (5.0) BCH12-E-5-8 3/4 (19.0) 5/16 to 1 /2 (7.9 to 12.7) 11.0 (5.0) BCH12-E-9-12 3/4 (19.0) 9/16 to 3 /4 (14.3to 19.0) 12.0 (5.4) BCH21-E-2-4 * 1 5 /16 (33.3) 1/8 to 1 /4 (3.2 to 6.3) 18.4 (8.3) BCH21-E-5-8 * 1 5 /16 (33.3) 5/16 to 1 /2 (7.9 to 12.7) 22.6 (10.2) BCH21-E-9-12 * 1 5 /16 (33.3) 9/16 to 3 /4 (14.3to 19.0) 19.8 (9.0) BCH32-E-2-4 * 2 (50.8) 1/8 to 1 /4 (3.2 to 6.3) 23.8 (10.8) BCH32-E-5-8 * 2 (50.8) 5/16 to 1 /2 (7.9 to 12.7) 24.4 (11.0) BCH32-E-9-12 * 2 (50.8) 9/16 to 3 /4 (14.3to 19.0) 24.6 (11.1) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-E-5-8 196
Cable To Beam Fasteners 360 rotation allows cable to run in any direction Simply installed with a screwdriver BCH12-C2 3/4 (19.0) Thru 1 /2 (13mm) 17.4 (7.9) BCH21-C2 * 1 5 /16 (33.3) Thru 1 /2 (13mm) 39.8 (18.0) BCH32-C2 * 2 (50.8) Thru 1 /2 (13mm) 45.0 (20.4) BCH64-C2 * 4 (101.6) Thru 1 /2 (13mm) 95.6 (43.3) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-C2 Cable To Beam Fasteners 360 rotation allows cable to run in any direction Simply installed with a screwdriver BCH12-C442 3/4 (19.0) 1/8-5 /8 (3-16) 23.5 (10.6) BCH21-C442 * 1 5 /16 (33.3) 1/8-5 /8 (3-16) 45.8 (20.8) BCH32-C442 * 2 (50.8) 1/8-5 /8 (3-16) 51.6 (23.4) BCH64-C442 * 4 (101.6) 1/8-5 /8 (3-16) 102.4 (46.6) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-C442 197
Cable To Beam Fasteners Simply installed with a screwdriver BCH12-C1 3/4 (19.0) Thru 1 /2 (13mm) 12.3 (5.6) BCH21-C1 * 1 5 /16 (33.3) Thru 1 /2 (13mm) 20.7 (9.4) BCH32-C1 * 2 (50.8) Thru 1 /2 (13mm) 25.9 (11.7) BCH64-C1 * 4 (101.6) Thru 1 /2 (13mm) 61.3 (27.8) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-C1 Cable To Beam Fasteners Simply installed with a screwdriver BCH12-C442A 3/4 (19.0) 1/8-5 /8 (3-16) 18.4 (8.3) BCH21-C442A * 1 5 /16 (33.3) 1/8-5 /8 (3-16) 26.8 (12.1) BCH32-C442A * 2 (50.8) 1/8-5 /8 (3-16) 32.0 (14.5) BCH64-C442A * 4 (101.6) 1/8-5 /8 (3-16) 67.4 (30.6) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-C442A 198
Cable To Flange Fasteners Supports cable from vertical flanges Simply installed with a hammer BCH12-F3 3/4 (19.0) 1/16-1 /4 (1.6-6.3) 13.0 (5.9) BCH21-F3 * 1 5 /16 (33.3) 1/16-1 /4 (1.6-6.3) 21.0 (9.5) BCH32-F3 * 2 (50.8) 1/16-1 /4 (1.6-6.3) 26.0 (11.8) BCH64-F3 * 4 (101.6) 1/16-1 /4 (1.6-6.3) 62.4 (28.3) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-F3 Cable To Flange Fasteners Supports cable from angled flanges Simply installed with a hammer BCH12-F4 3/4 (19.0) 1/16-1 /4 (1.6-6.3) 13.0 (5.9) BCH21-F4 * 1 5 /16 (33.3) 1/16-1 /4 (1.6-6.3) 21.0 (9.5) BCH32-F4 * 2 (50.8) 1/16-1 /4 (1.6-6.3) 25.8 (11.7) BCH64-F4 * 4 (101.6) 1/16-1 /4 (1.6-6.3) 62.4 (28.3) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-F4 Patent #5961081 199
Cable To Rod Fasteners Supports cable from #12 wire thru 3 /8" threaded rod Static Load Capacity: 25 Lbs. (11.3kg) W2 series attaches to #12 wire thru 1 /4" plain or threaded rod W6 series attaches to 3 /8" plain or threaded rod Part Number Hook Size Wt. Per 100 BCH12-W2 3/4 (19.0) 10.0 (4.5) BCH21-W2 * 1 5 /16 (33.3) 17.6 (8.0) BCH32-W2 * 2 (50.8) 23.4 (10.6) BCH12-W6 3/4 (19.0) 10.0 (4.5) BCH21-W6 * 1 5 /16 (33.3) 17.8 (8.1) BCH32-W6 * 2 (50.8) 23.6 (10.7) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-W6 Cable To T-Bar Fasteners Supports cable above ceiling grid 360 rotation allows cable to run in any direction Provides compliance with 1997 EIA/TIA standard 569-A Permits dropwire attachment if required Part Number Hook Size Wt. Per 100 BCH12-A28 3/4 (19.0) 23.0 (10.4) BCH21-A28 * 1 5 /16 (33.3) 30.6 (13.9) BCH32-A28 * 2 (50.8) 36.8 (16.7) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-A28 200
Cable To Floor Support Fasteners Supports cable from computer floor post Organizes cable off the floor for a neat installation Finish: Pre-galvanized Part Number Hook Size - Wt. Per 100 Floor Post Size Lbs. (kg) BCH12-L1410 3/4-1 O.D. 13.4 (6.1) BCH21-L1410 1 5 /16-1 O.D. 22.8 (10.3) BCH32-L1410 2-1 O.D. 28.4 (12.9) BCH64-L1410 4-1 O.D. 64.0 (29.0) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-L1410 Cable To Floor Support Fasteners Supports cable from square computer floor post Organizes cable off the floor for a neat installation Finish: Pre-galvanized Part Number Hook Size - Wt. Per 100 Floor Post Size Lbs. (kg) BCH12-G-8-12 3/4-1 Square 13.4 (6.1) BCH21-G-8-12 1 5 /16-1 Square 22.8 (10.3) BCH32-G-8-12 2-1 Square 28.4 (12.9) BCH64-G-8-12 4-1 Square 64.0 (29.0) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-G-8-12 201
Cable To ATR Fasteners.505" diameter hole designed to support cable from 3 /8" or 1 /2" threaded rod Allows back-to-back and multi-tier installations Part Number Hook Size Wt. Per 100 BCH21-AB * 1 5 /16 (33.3) 34.2 (15.5) BCH32-AB * 2 (50.8) 40.0 (18.1) BCH64-AB * 4 (101.6) 91.2 (41.3) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-AB Note: Part numbers listed are for galvanized hooks - Add SS4 for Stainless Steel. Angle Bracket Cable Fasteners Designed for direct attachment to structures Supports cable from 1 /4" threaded rod.265" diameter hole accepts anchors, screws or common nails Part Number Hook Size Wt. Per 100 BCH12-RB 3/4 (19.0) 29.0 (13.2) BCH21-RB * 1 5 /16 (33.3) 34.4 (15.6) BCH32-RB * 2 (50.8) 39.4 (17.9) BCH64-RB * 4 (101.6) 91.2 (41.3) * For Xylan coating, add X after cable hook part number. Ex: BCH32X-RB Note: Part numbers listed are for galvanized hooks - Add SS4 for Stainless Steel. 202
X-Hook Low Friction Cable Hooks Xylan coating provides smooth frictionless surface for cable pulling Great for use in corners, drop-outs or any direction change in the cable run X-Hook has lower coefficient of friction than Teflon Includes Quik-Latch cable retainer Spring Steel Fasteners New Xylan coating reduces cable friction. Ideal for pulling cable. Cable rollers are too expensive and require installation and removal. Part Number Hook Size Capacity Wt. Per 100 BCH21X 1 5 /16 (33.3) 50 4-Pair UTP 15.4 (7.0) BCH32X 2 (50.8) 80 4-Pair UTP 20.6 (9.3) BCH64X 4 (101.6) 300 4-Pair UTP 56.0 (25.4) Available with most fastener assemblies. See the following pages. 203
Single-Sided Multi-Tier Cable Fasteners Factory assembled multi-tier fasteners increase installation flexibility Available in two-tier through six-tier assemblies Unique design prevents hooks and assembly from rotating when pulling cable All support bars furnished in 6063-T6 aluminum Part Number Hook Size Overall Height Wt. Per 100 BCH21-2S 1 5 /16 (33.3) 11 (279) 65.0 (29.5) BCH32-2S 2 (50.8) 12 3 /4 (324) 78.0 (35.4) BCH64-2S 4 (101.6) 19 5 /16 (490) 94.0 (42.6) BCH21-3S 1 5 /16 (33.3) 14 3 /4 (374) 99.0 (44.9) BCH32-3S 2 (50.8) 17 1 /2 (444) 122.0 (55.3) BCH64-3S 4 (101.6) 28 1 /16 (713) 148.0 (67.1) BCH21-4S 1 5 /16 (33.3) 18 1 /2 (470) 133.0 (60.3) BCH32-4S 2 (50.8) 21 3 /4 (552) 166.0 (75.3) BCH21-5S 1 5 /16 (33.3) 21 3 /4 (552) 167.0 (75.7) BCH32-5S 2 (50.8) 27 (686) 182.0 (82.5) 6S BCH21-6S 1 5 /16 (33.3) 26 (660) 201.0 (91.2) BCH32-6S 2 (50.8) 31 3 /4 (806) 222.0 (100.7) 5S 4S 3S 2S 204
Double-Sided Multi-Tier Cable Fasteners Factory assembled multi-tier fasteners increase installation flexibility Unique design prevents hooks and assembly from rotating when pulling cable All support bars furnished in 6063-T6 aluminum Shown (at right) with optional BCHK2 kit Static Load Capacity: (per hook) 30 Lbs. (13.6kg) Spring Steel Fasteners Part Number Hook Size Overall Height Wt. Per 100 BCH21-1D 1 5 /16 (33.3) 5 1 /2 (140) 46.0 (20.8) BCH32-1D 2 (50.8) 6 3 /16 (157) 63.0 (28.6) BCH64-1D 4 (101.6) 9 (228) 144.0 (65.3) BCH21-2D 1 5 /16 (33.3) 9 1 /4 (234) 101.0 (45.8) BCH32-2D 2 (50.8) 11 (279) 112.0 (50.8) BCH64-2D 4 (101.6) 18 1 /4 (463) 287.0 (130.2) Note: Part numbers listed above are for galvanized hooks - Add SS4 for Stainless Steel or add H for Zinc-Plated Spring Steel for heavy-duty applications. 1D Patent #5961081 2D Multi-Tier Attachment Kits Kits permit secure attachment of single-tier and multi-tier fasteners. BCHK1 includes: 1 ea. beam clamp (B444-1 /4) 1 ea. 1 /4"-20 x 1 /2" hex head cap screw BCHK2 includes: 1 ea. angle bracket (with.320"ø and.390"ø holes) 1 ea. 5 /16"-18 x 3 /4" hex head cap screw 1 ea. 5 /16"-18 hex nut BCHK1 Beam Clamp BCHK3 includes: 1 ea. BCHK1 Kit 1 ea. BCHK2 Kit Part Flange Thickness Wt. Per 100 Number BCHK1 thru 5 /8 (thru 15.9) 27.0 (12.2) BCHK2 -- -- 43.0 (19.5) BCHK3 thru 5 /8 (thru 15.9) 67.0 (30.4) BCHK2 Angle Bracket BCHK3 Beam Clamp with Angle Bracket (Swivels 360 ) 205
Steel Support Bar Furnished in zinc plated steel. BCH-HBA will tier up to (2) BCH64 cable hooks on each side or up to (3) BCH21or BCH32 cable hooks on each side. BCH-HBA can be supported from 1 /4", 5 /16" and 3 /8" rod. Load Capacity: 180 Lbs. (81.6kg) Part Support Bar For Wt. Per 100 Number Lbs. (kg) BCH-HBA BCH21, BCH32 & BCH64 25.1 (11.4) Aluminum Support Bars Furnished in 6063-T6 aluminum Part Support Bar For Wt. Per 100 Number Lbs. (kg) BCH-HB21 BCH21 & BCH32 23.0 (10.4) 8 1 /4 (209mm) long with.281 Ø (7.1mm) holes BCH-HB64 BCH64 47.0 (21.3) 13 5 /16 (338mm) long with.281 Ø (7.1mm) holes 206