Technical Specifications SENNEBOGEN Track Material Handler

Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional 1 (1 m) (stick pin) up to 8 (18 m) (stick pin) Operating Weight R-HD / track 1,11 lb (, kg) Magnet System rating kw

Technical Specifications 8 R-HD E ENGINE model type emission net power injection displacement bore stroke aspiration fuel tank air filtration control ELECTRICAL alternator starter battery lights Cummins QSL9-C in-line, cylinder, cooled exhaust gas recirculation, water cooled EPA Tier Final HP ( kw) @, rqm high pressure common-rail 8.9 L (.1 cu.in.).9 in (11 mm).9 in (1 mm) turbo charged, charge air cooled 1 gal (L) direct flow filtration system dual stage filter with pre-filter integrated ECM automatic idle - stop eco mode V/Ah Vm.8 kw x 1 V, Ah x cab roof, type halogen x frame upper carriage, type H HYDRAULIC SYSTEM system type LUDV load sensing pilot pressure controlled open center pump type variable-displacement axial-piston pump max. pump flow 19 gpm ( l / m) max. pressure, psi ( bar) hydraulic tank 1 gal ( L) hydraulic system 18 gal (8 L) filtration dual filtration system micron (HydroClean) COOLING cooling type hydraulic / water charge air cool-on-demand, suction-type fan system, side by side hydraulic fan drive axial piston pump, reversible fan thermostatically controlled, closed loop system direct fan drive SWING SYSTEM swing speed swing hydraulic drive swing brake swing bearing - 8 rpm open loop x axial piston motor driving planetary gearbox, integrated brake valves multidisc brake, spring loaded external teeth, sealed ball bearing TRAVEL / UNDER CARRIAGE type crawler T1/8 system mechanical adjustable wide gauge drive independent driven by an axial piston motor through a compact planetary travel speed 1 st -1. mph (-1. km/h) nd -1.8 mph (-. km/h) shoes. ( mm) (triple grouser) crawler B maintenance free steering foot pedals / levers safety travel alarm REFILL CAPACITIES fuel tank 1 gal ( L) engine cooling system 1.8 gal (. L) engine oil w / filter. gal (8. L) hydraulic tank 1 gal ( L) hydraulic system 18 gal (8 L) swing gear (each) 1. gal (. L) final drive (each).8 gal (9. L) swing ring lubrication reservoir. gal (1. L) central lubrication reservoir. lb (. kg) diesel exhaust fluid.9 gal ( L) MAGNET SYSTEM rating voltage (magnetized) current (cold condition) controller generator drive WEIGHT operating weight kw V 9 Amps Hubbell Baldor hydraulic 1,11 lb (, kg) Subject to technical modification.

Standard / Optional Equipment 8 R-HD E ENGINE Water separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater ELECTRIC Battery disconnect switch Centralized fuse box Battery jump start connection from ground level HYDRAULIC Pilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves micron dual filtration system Load sensing, flow on demand hydraulic system Optimized hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Additional hydraulic circuits Attachment return filtration filters ( µm) UPPER CARRIAGE Rearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Removable panels Additional light package Custom colors Seawater paint coating OPERATORS CAB (maxcab) Hydraulic elevating cab system E Multi adjustable, air suspended operators seat ( mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows with safety glass Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor Monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 1 V / V power outlet Windshield wiper and washers Emergency exit hammer Safety lever Sun shades OPERATORS CAB (maxcab) Interior lighting Rain cover front window Outside mirror Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest maxcab industry Windshield protection guard Skylight protection guard Skylight FOPS guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E/ Operators cab with floor window Additional cameras UNDERCARRIAGE Heavy duty designed material handling under carriage Crawler under carriage with mechanical adjustable tracks Heavy duty crawler track frame. ( mm) triple grouser track shoes, canted Maintenance free crawlers B Hydraulic chain tension device Travel alarm 1. (8 mm) triple grouser track shoes, canted. ( mm) forged flat track shoes, canted Crawler under carriage with hydraulic adjustable tracks WORKING EQUIPMENT Purpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Boom position 1 Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick limitation Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears Boom position MAGNET SYSTEM Hydraulic driven generator Magnet controller Magnet suspension link ATTACHMENTS Orange peel grapple Mag grapple Clamshell Magnet Log grapple Scrap shear Power attachment Pipe handler Live heel SWING SYSTEM protection cover, removable Manual operated swing gear pinion lubrication system Subject to technical modification. Standard Equipment Optional Equipment

8 R-HD E Lift Capacities K1-1 1 [.] 19, 1,1 19, [.] 1, [.] 11,9 1 1 1 8 M E [19.],1 [1.],18 [.] [1.9] 1,, [.8],11,8 [.9],8 [1.],11 [1.] 9, [1.],18 [1.],11 [9.] [11.] 19,81,9 19, [9.] 1,1 [.], [.1], [.],18 [11.],1 [11.], [1.1], [1.],11 [1.], [9.8] 1, [8.] 19,18 19, [8.9] 19,1 [9.1], [9.], [9.] 1,8 [9.9] 1,8 [.], [9.8] 1, [9.],8 [8.] 18,8 [.] 1,9 [.8] 1,19 [.9] 1,1 [8.] 1, [8.1] 1,8 [8.] 18,98 [8.] 18,19 [8.] 18,98 [8.1] 1,8 [.] 1, [.] 1, [.] 11, [.9] 1,1 [.] 1, 1, 1, [.] 1,8 [.] 1,8 1, [.] 1,9 [.] 1, [.] 1,9 [.] 1,8 [.] 1, [.] [.] 9,91 [.] [.] 11,9 [.] 11,8 [.] 11,,11 [.] 8,818 1 1 11 9 8 1-1 - - - - 1 - - -1 machine shown in mirror image 1 8 9 11 1 1 1 1 1 1 18 - - 1 Working Equipment K1-1 reach 1'" (1.9 m) boom 9'" (9.1 m) stick '8" (.9 m) boom pos. 1 Operator s Cab model E maxcab hydraulic elevating up 8'8" (. m) elevation eye level approx. 19' (.8 m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

8 R-HD E Lift Capacities 8 M E [19.1],8 [1.] 1, 9,9 [.],9 [.] 8,1 machine shown in mirror image [.9] 1,1 [1.] 8, [1.],8 [1.8],8 [1.9], [.] [11.] 1,9,1 [.] [.] 1,,9 [.] 1,9 [.8] 1, 1,8 [9.] 1,8 [.1], [.],9 [11.1],1 [11.], [11.], 1, [.9] 1,1 [8.] 18,8 [8.] 18,8 [8.] 18,19 [8.] 18,9 [8.9] 19,1 [9.],8 [9.], [9.], [9.],8 19, [9.] [8.],9 1, [.9] 1,1 1, [.] 1,9 [.] 1,9 [.] 1,1 [.] 1, [.] 1,9 [.8] 1,19 [.9] 1,1 [.9] 1,1 [.] 1,9 [.] 1,9 [.] 1,1 [.8] 1,8 [.8] 1,8 [.] 1, [.] 1, [.] 1, [.] 1, [.] 1,1 [.] 1,1 [.] 1, [.] 1,9 [.] 1, [.9],8 [.] 11,9 [.8] 1,8 [.] 1, [.] [.], [.] 8,818,11 [.] 11,8 [.] 11,8 [.] [.] [.1] 11, [.] 11, [.8],8 9, [.9] 8,89 K18-1 [.] 9,8,11 [.] 9,91 9, 9,9 [.9] 8,98 [.],1 1 8 9 11 1 1 1 1 1 1 18 1 18 1 1 1 1 1 1 11 9 8 1-1 - - - - - 1 - - -1 - Working Equipment K18-1 reach '8" (1.8 m) boom '" (.1 m) stick '11" (.9 m) boom pos. 1 Operator s Cab model E maxcab hydraulic elevating up 8'8" (. m) elevation eye level approx. 19' (.8 m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

8 R-HD E Lift Capacities [.] [1.] 1, 9,1 [.],9 [.], [.],9 [.1] 9,9 [11.],1 [1.], 19, [.] 1, [.] 1, [8.] 18,9 [9.],8 [9.] 1,8 [.],8 [.],18 [.],98 [9.9] 1,8 19, [8.] 18,9 [.] 1,9 [.] 11,9 [.] 1, [.9] 1,1 1, [.] 1,1 [.] 1,9 [8.] 1, [8.] 18,98 [8.] 18,9 [8.] 18,9 [8.] 18,98 [.9] 1,1 [.] 1,8 [.] 1,1 1,8 1,8 [.] 1,9 [.] 1,9 [.] 1, [.] 1, 1, 1, [.9] 1,1 [.] 1, 1,8 [.] 11,9 [.] 8,818 [.] 1,1 [.] 1,1 [.] 1,1 [.] 1, [.] 1, [.8] 1,8 [.] 1,8 1,8 1,8 [.] 1, [.],11 [.8] 8, [.] 11, [.] 11, [.1] 11, [.1] 11, [.] [.] [.] 11,8 [.] 11,8 [.] [.1] 11, [.9],8 [.] 9,91 [.9] 8,98,11,11,11 [.], [.], [.], [.],,11 9, 9,9 [.8] 8, [.], B18-1 9,9 9,9 9,9 9,9 [.1] 9,9 [.] 8,818 [.8] 8, [.],1 18 1 1 1 1 1 1 11 9 8 1-1 - - - - - 1 - - -1 - machine shown in mirror image - - 1 8 9 11 1 1 1 1 1 1 18 1 Working Equipment B18-1 reach 8'" (1.8 m) boom '" (.8 m) stick '11" (.9 m) boom pos. 1 Operator s Cab model E/ maxcab hydraulic elevating up & out (optional item) eye level approx. '" (. m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

8 R-HD E Lift Capacities [8.] 18,19 [8.] [.] 18,9 1, [8.] 18,9 1, K1-1 ULM 1 1 1 1 [1.] [1.8] [.] 9,1 8,19, [19.] [1.8] [.8],8,,8 [.] [1.] [11.1],9,18,1 [.] [1.] [11.],1,18,9 [.1],8 [.8] 8, [1.], [8.] [.] 19,18,89 [9.] [8.1] [.9], 1,8 1,1 [9.] [8.] [.] [.], 1, 1, 1,9 [9.] [8.1] [.] [.] [.],9 1,8 1, 1,9 [9.8] [8.] [.] [.] 1, 18,98 1, 1,9 11,9 [8.] [.] [.] [.] 18,9 1,8 1,9 11,9 [.] [.] [.] 19, 1,9 1,9 11,8 [8.9] [.] [.] [.] 19,1 1,1 1,9 [8.9] [.] [.] [.] 19,1 1,9 1,8 11, [8.] [.] [.] 18,9 1, 1,,11 [.] [9.8] [.9] [.] [.] 1, 1, 1,1 1,9 [.8] [8.] [.] 1,19 18,98 1, 9, [.1] 9,9 [.], [.] 9,8 9, 9,9 [.9] 8,98 [.],1 1 1 11 9 8 1-1 - - 1 - - - - -1 machine shown in mirror image 1 8 9 11 1 1 1 1 1 1 18 - - 1 Working Equipment K1-1 ULM reach '11" (1. m) boom 9'" (9.1 m) stick 1'8" (. m) ULM boom pos. 1 Operator s Cab model E maxcab hydraulic elevating up eye level approx. 19' (.8 m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

Transport dimensions '" () 1'1" (,) 9'8" (,) 19' (,8) 8'" (,) '8" (,9) '" () '" (,1) '" (1,) 1'" () '" (,) 9'8" (,) 1'" (,8) 1'8" (,) 1'" (,) 1'" (,) '" (1,) Reach Boom Length Stick Length Transport Length Transport Height H1* Transport Height H1/** Transport Width K1-1 9'" (9, mm) '8" (,9 mm) '" (1, mm) 11'" (, mm) 11'" (, mm) 9'" (, mm) K18-1 '" (, mm) '11" (,9 mm) '" (1, mm) 11'" (, mm) 11'" (, mm) 9'" (, mm) B18-1 '" (,8 mm) '11" (,9 mm) 9'" (1, mm) 11'" (, mm) 11'" (, mm) 9'" (, mm) K1-1 ULM 9'" (9, mm) 1'8" (, mm) '" (1, mm) 11'" (, mm) 11'" (, mm) 9'" (, mm) transport dimensions valid for boom position 1 only boom bosition may increase transport height & transport length handrails, catwalks & other accessories are disassembled for transportation *optional cab E/ will increase machine transport height by " ( mm) **only valid with 8" ( mm) rise of machine and/or clearance for boom/stick lowering Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. See your SENNEBOGEN dealer for further information. 1 SENNEBOGEN LLC, all rights reserved, printed in USA SENNEBOGEN LLC 19 Sennebogen Trail Stanley, NC 88, USA Phone +1 () -9 Fax +1 () -889 Email sales@sennebogenllc.com 8R-HD/E-1 GO FOR GREEN www.sennebogen-na.com