PRODUCT SPECIFICATIONS PACKAGED GAS/electric ZG Z-Series Rooftop Units 60 HZ Bulletin No. ZGA-036-060 (02/203) MODEL NUMBER IDENTIFICATION Brand/Family Z = Z-Series Unit Type G = Packaged Gas Heat w/ Electric Cooling Major Design Sequence A = st Generation B = 2nd Generation Nominal Cooling Capacity - Tons 036 = 3 Tons 048 = 4 Tons 060 = 5 Tons Cooling Efficiency S = Standard Efficiency 3 to 5 Tons Net Cooling Capacity 34,600 to 57,000 Btuh Gas Input Heat Capacity 65,000 to 50,000 Btuh Z G A 060 S 4 B S Y Refrigerant Type 4 = R-40A Minor Design Sequence = st Revision 2 = 2nd Revision 3 = 3rd Revision Heating Type S = Standard Gas Heat, Stage M = Medium Gas Heat, Stage H = High Gas Heat, 2 Stage T = High Gas Heat, Stage U = Medium Gas Heat, 2 Stage Q = Medium Gas Heat, 2 Stage, Low NOx W = Standard Gas Heat, Stage, Low NOx Y = Medium Gas Heat, Stage, Low NOx X = High Gas Heat, 2 Stage, Low NOx Z = High Gas Heat, Stage, Low NOx Blower Type B = Belt Drive Voltage P = 208/230V phase-60hz Y = 208/230V-3 phase-60hz G = 460V-3 phase-60hz J = 575V-3 phase-60hz ASHRAE 90. COMPLIANT
FEATURES AND BENEFITS H G L J E D F B C K I Z-Series rooftop units from Allied are the new standard for cost efficient, reliable rooftop units built for long-lasting performance that can significantly improve indoor environments. Z-Series rooftop units feature: Quick and Easy Retrofit - Fast installation for replacement of many existing rooftop units - fits high volume competitor s roof curbs R-40A Refrigerant - Environmentally friendly Scroll Compressors - Single speed scroll compressor is furnished on all models. Eco-last Coil System - Smaller, lighter condenser coil. High Pressure Switch - Protects compressor. Belt Drive Blower Motor - To maximize air performance. Downflow or Horizontal Airflow - Easy field conversion. Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle. Corrosion-Resistant Drain Pan - Provides application flexibility, durability, improved serviceability and meets ASHRAE 62. requirements for drain pan slope. Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 2
FEATURES AND BENEFITS Contents Accessory Dimensions...........................23 Blower Data................................ 3 Dimensions.................................22 Electrical Data............................... 8 Features And Benefits........................... 2 High Altitude Derate............................ Model Number Identification........................ Options / Accessories............................ 8 Outdoor Sound Data............................20 Ratings...................................2 Specifications................................0 Specifications - Gas Heat......................... Unit Clearances.............................. 9 Weight Data................................ 2 Limit Controls Factory installed, redundant limit controls with fixed temperature setting. Heat limit controls protect heat exchanger and other components from overheating. Safety Switches Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation. Low NO x Models APPROVALS AHRI Certified to AHRI Standard 20/240-2008. CSA listed. Units are Certified by CSA. Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes. All models are ASHRAE 90. compliant. ISO 900 Registered Manufacturing Quality System. Models equipped with low NOx gas heat meet the California Nitrogen Oxides (NOx) Standards that apply in the South Coast Air Quality Management District and the San Francisco Bay Area Air Quality Management District. WARRANTY Limited ten years aluminized heat exchanger. Limited five years on compressors. Limited three years on the Eco-last Coil System. Limited one year all other covered components. B C D HEATING SYSTEM Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic single or dual stage gas valve with manual shut-off. Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Electronic Pilot Ignition Electronic spark igniter provides positive direct ignition of burners on each operating cycle. The system permits main gas valve to stay open only when the burners are proven to be lit. Should a loss of flame occur, the gas valve closes, shutting off the gas to the burners. Ignition module has LED to indicate status and aid in troubleshooting. Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls. Ignition control is factory installed in the controls section. All models are available in low NO x versions. REQUIRED SELECTIONS Gas Input Choice - Order one: Standard Gas Heat ( Stage) 65,000 Btuh Medium Gas Heat ( Stage) 08,000 Btuh Medium Gas Heat (2 Stage) 75,600/08,000 Btuh High Gas Heat ( Stage) 50,000 Btuh High Gas Heat (2 Stage) 05,000/50,000 Btuh Standard or Low NOx Specify conventional gas heat or Low NOx option. OPTIONS/ACCESSORIES Field Installed LPG/Propane Kits Conversion kit to field change over units from Natural Gas to LPG/ Propane. Vertical Vent Extension Kit Use to exhaust flue gases vertically above unit. Required when unit vent is too close to fresh air intakes per building codes. The vent kit also prevents ice formation on intake louvers. Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 3
E FEATURES AND BENEFITS COOLING SYSTEM Designed to maximize sensible and latent cooling performance at design conditions. System can operate from 35 F to 25 F without any additional controls. R-40A Refrigerant Non-chlorine, ozone friendly, R-40A. Unit is factory pre-charged with refrigerant. See Specifications Table. Compressor Resiliently mounted on rubber grommets for quiet operation. Scroll compressors for high performance, reliability and quiet operation. High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation. Filter/Drier High capacity filter/drier protects the system from dirt and moisture. F Eco-last Coil System Condenser coil features lightweight, all aluminum brazed fin construction. Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds. Eco-last Coil System Features: Improved heat transfer performance due to high primary surface area (flat tubes) versus secondary surface (fins). Smaller internal volume (reduced refrigerant charge). High durability (all aluminum construction). Fewer brazed joints. Compact design (reduces unit weight). Easy maintenance/cleaning. Mounting brackets with rubber inserts secure coil to unit providing vibration dampening and corrosion protection Evaporator Coil Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested. Cross row circuiting with rifled tubing optimizes both sensible and latent cooling capacity. Condensate Drain Pan Plastic pan, sloped to meet drainage requirements of ASHRAE 62.. End drain connection. G Outdoor Coil Fan Motor Thermal overload protected, totally enclosed, permanently lubricated bearings, shaft down, fan guard mount. Outdoor Coil Fan Guard PVC coated fan guard furnished. REQUIRED SELECTIONS Cooling Capacity Specify nominal cooling capacity of the unit. OPTIONS/ACCESSORIES Field Installed Condensate Drain Trap Field installed only. Available in copper or PVC. Compressor Crankcase Heater Protects against refrigerant migration that can occur during low ambient operation. Drain Pan Overflow Switch Monitors condensate level in drain pan, shuts down unit if drain becomes clogged. Low Ambient Kit Cycles the outdoor fan while allowing compressor operation in the cooling cycle. This intermittent fan operation allows the system to operate without icing the evaporator coil and losing capacity. Designed for use in ambient temperatures no lower than 0 F. A crankcase heater must be installed on the compressor. Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 4
H I J K FEATURES AND BENEFITS CABINET Construction Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation. Base rails have rigging holes. Three sides of the base rail have fork slots. Raised edges around duct and power entry openings in the bottom of the unit provide additional protection against water entering the building. Airflow Choice Units are shipped in downflow (vertical) configuration, can be field converted to horizontal airflow configuration without the need of a kit. Power Entry Electrical lines can be brought through the unit base or through horizontal access knock-outs. Optional Bottom Power Entry Kit is available. Exterior Panels Constructed of heavy-gauge, galvanized steel with a two-layer enamel paint finish. Insulation All panels adjacent to conditioned air are fully insulated with nonhygroscopic fiberglass insulation. Access Panels Access panels are provided for the compressor, heating, controls, blower and air filter/economizer section. OPTIONS/ACCESSORIES Factory Installed Corrosion Protection A completely flexible immersed coating with an electrodeposited dry film process. (AST ElectroFin E-Coat) Meets Mil Spec MIL-P-53084, ASTM B7 Standard Method Salt Spray Testing. Indoor Corrosion Protection: - Coated coil Outdoor Corrosion Protection: - Coated coil Field Installed Coil/Hail Guards Constructed of heavy gauge steel, painted to match cabinet, helps protect outdoor coil from damage on all three sides of cabinet. CONTROLS Unit Control All control voltage is provided via a 24V (secondary) transformer with inline fuse protection. Heat/Cool Staging - Capable of up to 2 heat / 2 cool staging with a thermostat. Night Setback Mode - Saves energy by closing outdoor air dampers and operating supply fan on thermostat demand only. Smoke Detectors NOTE - Smoke detectors are not available and must be field provided by installer. Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 5
FEATURES AND BENEFITS L BLOWER A wide selection of supply air blower options are available to meet a variety of air flow requirements. Motor Overload protected, equipped with ball bearings. Belt drive motors are offered on all models and are available in several different sizes to maximize air performance. Supply Air Blower Forward curved blades, blower wheel is statically and dynamically balanced. Equipped with ball bearings and adjustable pulley (allows speed change),. REQUIRED SELECTIONS Supply Air Blower Order blower motor horsepower and drive kit number required when base unit is ordered, see Drive Kit Specifications Table. INDOOR AIR QUALITY Air Filters Disposable 2 inch filters furnished as standard. OPTIONS/ACCESSORIES Field Installed Indoor Air Quality (CO 2 ) Sensor Monitors CO 2 levels adjusts economizer dampers as needed for Demand Control Ventilation. SERVICEABILITY Designed to streamline general maintenance and decrease troubleshooting time. Marked & Color-Coded Wiring All electrical wiring is color-coded and marked to identify which components it is connecting. Electrical Plugs Positive connection electrical plugs are used to connect common accessories or maintenance parts for easy removal or installation. Blower Access Supply air blower parts are located near the access door for easy servicing and adjustment. Coil Cleaning Condenser coil allows easy cleaning. Compressor Compartment Compressor is located near the perimeter of the unit in the outdoor compartment for easier access. Hinged service panel in the condenser section allows system operation checks to be done without changing the air flow across the outdoor coils. ELECTRICAL REQUIRED SELECTIONS Voltage Choice Specify when ordering base unit. Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 6
OPTIONS / ACCESSORIES ECONOMIZER/OUTDOOR AIR/EXHAUST OPTIONS Factory or Field Installed Economizer Downflow (Factory Installed) Downflow or Horizontal (Field Installed) Gear-driven action return air and outdoor air dampers, plugin connections to unit, nylon bearings, neoprene seals, 24-volt, fully-modulating spring return motor, adjustable minimum damper position. Outdoor Air Hood is furnished. Economizer includes Barometric Relief Dampers with Exhaust Hood. Barometric Relief Dampers allow relief of excess air, aluminum blade dampers prevent blow back and outdoor air infiltration during off cycle. Single Sensible Temperature Control is furnished with the economizer Outdoor air sensor enables Economizer if the outdoor temperature is less than the setpoint of the control. Outdoor Air Dampers - Downflow Linked mechanical dampers, 0 to 35% (fixed) outdoor air adjustable, installs in unit. Automatic model features fully modulating spring return damper motor with plug-in connection. Manual model features a slide damper. Maximum mixed air temperature in cooling mode: 00 F. Outdoor Air Hood is furnished. Power Exhaust Fan - Downflow or Horizontal Installs external to unit for applications with Economizer option. Provides exhaust air pressure relief. Interlocked to run when supply air blower is operating, fan runs when outdoor air dampers are 50% open (adjustable), motor is overload protected. Fan is 2 in. diameter with 5 fan blades. /2 hp motor. CEILING DIFFUSERS Ceiling Diffusers (Flush and Step-Down) Aluminum grilles, large center grille, insulated diffuser box with flanges, hanging rings furnished, interior transition (even air flow), internally sealed (prevents recirculation), adapts to T-bar ceiling grids or plaster ceilings. Transitions (Supply and Return) NOTE - Ceiling Diffuser Transitions are not furnished and must be field fabricated. ROOF CURB Roof Curb, Downflow Full perimeter. Insulated filler panels are furnished for installation under the outdoor section of the rooftop unit. See dimension drawings. Nailer strip furnished, mates to unit, US National Roofing Contractors Approved, shipped knocked down. Available in 8, 4, 8, and 24 inch heights. Clip Curbs use interlocking tabs to fasten together. No tools required. Standard roof curb corners fasten together with furnished hardware. Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 7
OPTIONS / ACCESSORIES Item COOLING SYSTEM Catalog No. 036 048 060 Condensate Drain Trap PVC - CTRAP20AD2 76W26 X X X Copper - CTRAP0AD2 76W27 X X X Compressor Crankcase Heater 208/230V- or 3ph - ZCCHT0A-P 99W6 X 208/230V- or 3 ph - ZCCHTA-P 99W64 X X 460V - 3 ph - ZCCHT0A-G 99W62 X 460V - 3 ph - ZCCHTA-G 99W65 X X 575V - 3 ph - ZCCHT0A-J 99W63 X 575V - 3 ph - ZCCHTA-J 99W66 X X Drain Pan Overflow Switch ZSNSR90A 99W59 X X X Low Ambient Kit ZSNSR33A- 99W67 X X X HEATING SYSTEM Gas Heat Input Standard Stage - 65 kbtuh input Factory O O O LPG/Propane Conversion Kits Medium Stage - 08 kbtuh input Factory O O O Medium 2 Stage - 75/08 kbtuh input Factory O O O High Stage - 50 kbtuh input Factory O O High 2 Stage - 05/50 kbtuh input Factory O O For Stage models - ZPROP0A- 0B6 X X X For 2 Stage models - ZPROP20A- 0B65 X X X Vertical Vent Extension Kit CEXTN20FF 3W62 X X X Blower - SUPPLY AIR Motors Belt Drive - hp Standard Efficiency Factory O O O Drive Kits See Blower Data Tables for selection CABINET Belt Drive -.5 hp Standard Efficiency Factory O O O Kit #Z0-678-035 rpm Factory O Kit #Z02-803-226 rpm Factory O Kit #Z03-906-383 rpm Factory O Kit #Z04-964-47 rpm Factory O 2 Kit #Z05-098-490 rpm Factory O 2 Kit #Z06-262-634 rpm Factory O Coil/Hail Guards ZGARD0A- 97W53 X X X Corrosion Protection Factory O O O ELECTRICAL Voltage 60 hz 208/230V - phase Factory O O O 208/230V - 3 phase Factory O O O 460V - 3 phase Factory O O O 575V - 3 phase Factory O O O Bottom Power Entry Kit ZPEKT0A- 98W08 X X X ECONOMIZER Economizer - With Barometric Relief Dampers and Exhaust Hood (Downflow) ZECON30A- 98W09 OX OX OX Economizer - With Barometric Relief Dampers and Exhaust Hood (Horizontal) ZECON6A- 98W68 X X X Economizer Controls Single Enthalpy Control CSNSR64FF 53W64 X X X hp blower motor is not available for 208/230V-ph applications. 2.5 hp motor is required with Z05 and Z06 drive kits. NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only. OX - Field Installed or Configure to Order (factory installed) O - Configure to Order (Factory Installed) X - Field Installed. Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 8
OPTIONS / ACCESSORIES Item OUTDOOR AIR Outdoor Air Dampers - Includes Outdoor Air Hood Catalog No. 036 048 060 Motorized ZDAMP2A- 95W74 X X X Manual ZDAMPA- 95W73 X X X Power EXhaust FAN Standard Static (Downflow) 208/230V- or 3ph - ZPWRE0A-P 2E0 X X X 460V-3ph - ZPWRE0A-G 23E0 X X X Standard Static (Horizontal) 208/230V- or 3ph - ZPWRE5A-P 24E0 X X X 460V-3ph - ZPWRE5A-G 28E0 X X X 575V Transformer Kit 575V-3ph - ZTRFM20A-J 59E02 X X X NOTE - Order 575V Transformer Kit with 208/230V Power Exhaust Fan for 575V applications. Indoor Air Quality Indoor Air Quality (Co 2 ) Sensors Sensor - Wall-mount, off-white plastic cover with LCD display C0SNSR50AEL 77N39 X X X Sensor - Wall-mount, black plastic case, no display, rated for plenum mounting C0SNSR53AEL 87N54 X X X CO 2 Sensor Duct Mounting Kit - for downflow applications C0MISC9AE 85L43 X X X Aspiration Box - for duct mounting non-plenum rated CO 2 sensor (77N39) C0MISC6AE 90N43 X X X ROOF CURBS - downflow Clip Curb 8 in. height ZCURB40A- 95W8 X X X 4 in. height ZCURB4A- 95W9 X X X 8 in. height ZCURB42A- 95W20 X X X 24 in. height ZCURB43A- 95W2 X X X Standard Curb 4 in. height ZCURB0A- 92W50 X X X CEILING DIFFUSERS Step-Down - Order one RTD9-65-R 27G87 X X X Flush - Order one FD9-65-R 27G86 X X X NOTE - Ceiling Diffuser Transitions are not furnished and must be field fabricated. NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only. OX - Field Installed or Configure to Order (factory installed) O - Configure to Order (Factory Installed) X - Field Installed. Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 9
SPECIFICATIONS General Data Nominal Tonnage 3 Ton 4 Ton 5 Ton Model No. ZGA036S4B ZGA048S4B ZGA060S4B Efficiency Type Standard Standard Standard Cooling Performance Gross Cooling Capacity - Btuh 36,00 47,000 58,900 Net Cooling Capacity - Btuh 34,600 45,000 57,000 AHRI Rated Air Flow - 200 550 650 2 Sound Rating Number (SRN) (dba) 77 80 83 Total Unit Power - kw 3.0 4.3 5.3 SEER (Btuh/Watt) 3.00 3.00 3.00 EER (Btuh/Watt).50 0.60 0.70 Refrigerant Type R-40A R-40A R-40A Gas Heating Options - See page Charge Furnished 4 lbs. oz. 4 lbs. 6 oz. 5 lbs. 6 oz. Standard ( Stage) or Medium ( or 2 Stage) Standard ( Stage), Medium ( or 2 Stage) or High ( or 2 Stage) Compressor Type (one per unit) Scroll Scroll Scroll Outdoor Coil Net face area - sq. ft. 2.8 2.8 5.2 Outdoor Coil Fan Number of rows Fins / inch 23 23 23 Motor HP () /6 (PSC) () /4 (PSC) () /3 (PSC) Motor rpm 825 825 075 Total motor watts 200 30 360 Diameter - in. () 22 () 22 () 22 Number of blades 4 4 3 Total air volume - 2700 3300 3800 Indoor Coil Net face area - sq. ft. 8.4 8.4 8.4 3 Indoor Blower & Drive Selection Tube diameter - in. 3/8 3/8 3/8 Number of rows 2 2 3 Fins per inch 4 4 4 Drain Connection (no.and size) - in. () NPT () NPT () NPT Expansion device type Fixed Orifice Fixed Orifice Fixed Orifice Nominal Motor HP 4 hp,.5 hp 4 hp,.5 hp 4 hp,.5 hp Maximum Usable Motor HP.5 hp,.7 hp.5 hp,.7 hp.5 hp,.7 hp Available Drive Kits Kit #Z0 678-035 rpm Kit #Z04 964-47 rpm Kit #Z02 803-226 rpm 5 Kit #Z05 098-490 rpm Kit #Z03 906-383 rpm 5 Kit #Z06 262-634 rpm Wheel nominal diameter x width - in. 0 x 0 0 x 0 0 x 0 Filters Type Disposable Number and size - in. (4) 4 x 20 x 2 Electrical Characteristics - 60 Hz 208/230V phase 208/230V, phase 208/230V, phase 208/230V, 460V & 575V 3 phase 208/230V 460V & 575V 3 phase 208/230V 460V & 575V 3 phase NOTE - Net capacity includes evaporator blower motor heat deduction. Gross capacity does not include evaporator blower motor heat deduction. AHRI Certified to AHRI Standard 20/240: 95 F outdoor air temperature and 80 F db/67 F wb entering evaporator air; minimum external duct static pressure. 2 Sound Rating Number (SRN) rated in accordance with test conditions included in ANSI/AHRI Standard 270-2008. 3 Using total air volume and system static pressure requirements determine from blower performance tables rpm and motor hp required. Maximum usable hp of motors furnished are shown. In Canada, nominal motor hp is also maximum usable motor hp output. If motors of comparable hp are used, be sure to keep within the service factor limitations outlined on the motor nameplate. 4 hp blower motor is not available for 208/230V-ph applications. 5.5 hp motor is required with Z05 and Z06 drive kits. Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 0
SPECIFICATIONS - GAS HEAT Input Btuh Output Btuh Temperature Rise Model No. 036, 048, 060 036, 048, 060 036. 048, 060 048, 060 048,060 Heat Input Type Standard ( Stage) Medium ( Stage) Medium (2 Stage) High ( Stage) High (2 Stage) st Stage 65,000 08,000 75,600 50,000 05,000 2nd Stage - - - - - - 08,000 - - - 50,000 st Stage 52,000 84,600 60,480 20,000 84,000 2nd Stage - - - - - - 86,400 - - - 20,000 st stage 5-45 35-65 20-50 45-75 25-55 2nd Stage - - - - - - 35-65 - - - 45-75 AFUE 80% 80% 80% 80% 80% 2 Thermal Efficiency 80% 80% 80% 80% 80% Gas Supply Connections Rec. Gas Supply Pressure - Nat./ LPG /2 in. NPT 7 in.w.g. / in.w.g. Annual Fuel Utilization Efficiency based on U.S. DOE test procedures and FTC labeling regulations - phase models. 2 3 phase models. HIGH ALTITUDE DERATE NOTE - Units may be installed at altitudes up to 2000 ft. above sea level without any modifications. At altitudes above 2000 ft. units must be derated to match information in the table shown. At altitudes above 4500 ft. unit must be derated 2% for each 000 ft. above sea level. NOTE - This is the only permissible derate for these units. Heat Input Type Altitude Feet Gas Manifold Pressure in. w.g. Natural Gas LPG/ Propane Input Rate (Btuh) Standard ( Stage) 200-4500 3.0 9.0 60,000 Medium ( Stage) 200-4500 3.0 9.0 99,500 Medium (2 Stage) 200-4500 3.0/.7 9.0/5. 99,500 / 75,600 High ( Stage) 200-4500 3.0 9.0 38,000 High (2 Stage) 200-4500 3.0/.7 9.0/5. 38,000 / 05,000 Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page
RATINGS NOTE For Temperatures and Capacities not shown in tables, see bulletin Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section. 3 TON STANDARD EFFICIENCY ZGA036S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 960 33.5 2..69.84.97 3.0 2.40.69.84.99 27.8 2.7.69.86.00 23.6 3.04.70.90.00 63 F 200 36.0 2..75.9.00 33.4 2.4.75.92.00 30.0 2.73.75.95.00 25.5 3.05.78.99.00 440 38.0 2.2.79.97.00 35.2 2.42.80.98.00 3.8 2.74.8.00.00 27.3 3.06.85.00.00 960 36.0 2..53.67.8 33.4 2.4.52.67.8 30. 2.73.50.67.83 25.6 3.05.49.68.87 67 F 200 38.6 2.2.57.73.87 35.8 2.42.56.73.89 32.2 2.74.55.74.9 27.3 3.06.55.77.96 440 40.5 2.3.60.77.94 37.4 2.43.60.78.95 33.6 2.74.59.80.98 28.7 3.07.60.84.00 960 38.4 2.2.38.53.65 35.6 2.42.36.52.65 32.2 2.74.34.50.65 27.5 3.06.3.49.67 7 F 200 4. 2.3.4.57.7 38. 2.43.40.56.7 34.4 2.75.37.55.72 29.4 3.07.35.55.75 440 43.0 2.4.43.60.76 39.9 2.44.42.59.76 36.0 2.76.40.59.78 30.6 3.08.35.60.82 4 TON STANDARD EFFICIENCY ZGA048S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 280 46.0 3.09.7.85.97 42.9 3.48.7.86.99 39.5 3.93.7.87.00 34.3 4.48.73.9.00 63 F 600 49. 3.09.76.9.00 45.7 3.48.77.93.00 4.9 3.94.78.95.00 36.3 4.50.8.99.00 920 5.5 3.09.8.97.00 47.8 3.49.82.99.00 43.9 3.96.83.00.00 38.4 4.5.87.00.00 280 49.2 3.09.55.69.8 45.9 3.49.54.69.83 42.3 3.94.53.69.84 36.9 4.50.53.7.88 67 F 600 52.5 3.0.58.74.88 48.9 3.49.58.75.89 44.9 3.96.58.76.92 38.9 4.52.58.79.97 920 55.0 3.0.62.79.94 5. 3.50.6.80.96 46.8 3.98.62.8.99 40.4 4.53.63.86.00 280 52.3 3.0.4.54.67 48.8 3.49.40.54.67 44.9 3.96.38.53.68 39.2 4.52.36.53.70 7 F 600 55.8 3..42.58.72 5.9 3.50.42.58.73 47.6 3.97.40.57.74 4.4 4.54.38.58.77 920 58.3 3..44.6.77 54.2 3.5.43.6.78 49.6 3.99.42.62.80 42.9 4.55.4.64.84 5 TON STANDARD EFFICIENCY ZGA060S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 600 56.5 3.67.73.87.00 52.4 4.3.74.90.00 48.0 4.65.76.93.00 43.0 5.26.78.97.00 63 F 2000 59.4 3.70.78.95.00 55. 4.6.80.98.00 50.5 4.69.83.00.00 45.9 5.3.86.00.00 2400 6.7 3.72.84.00.00 57.7 4.9.86.00.00 53.4 4.72.89.00.00 48.5 5.36.94.00.00 600 60.3 3.7.57.70.84 56.0 4.6.57.72.86 5.4 4.70.57.73.89 46.2 5.32.58.76.94 67 F 2000 63.3 3.73.60.76.92 58.8 4.20.6.78.95 53.8 4.74.62.8.99 48.4 5.36.63.84.00 2400 65.6 3.76.64.82.99 60.8 4.22.65.84.00 55.7 4.76.66.87.00 49.7 5.38.68.92.00 600 64.0 3.74.42.55.68 59.5 4.20.42.56.70 54.7 4.75.4.56.7 49.3 5.37.40.57.74 7 F 2000 67.2 3.77.44.59.74 62.4 4.24.44.60.76 57.3 4.79.43.6.78 5.7 5.42.43.63.82 2400 69.6 3.80.45.63.80 64.7 4.27.45.64.82 59.3 4.82.45.66.85 53.2 5.45.45.68.90 Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 2
BLOWER DATA - BELT DRIVE - ZGA036 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (heat section, economizer, wet coil, etc.). 2 - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page 6 for blower motors and drives and wet coil and options/accessory air resistance data. DOWNFLOW Air Volume External Static - in. w.g. 0.0 0.20 0.30 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit Z0 900 566 0.6 63 0.8 699 0.9 768 0.2 836 0.22 90 0.25 96 0.27 06 0.29 000 59 0.8 656 0.20 724 0.2 793 0.23 859 0.25 922 0.27 979 0.30 032 0.33 00 68 0.20 684 0.22 752 0.24 89 0.26 883 0.28 944 0.3 998 0.34 049 0.37 200 648 0.23 75 0.25 782 0.27 847 0.29 90 0.32 967 0.35 020 0.38 068 0.42 300 68 0.26 748 0.28 84 0.30 878 0.33 937 0.36 992 0.39 043 0.43 089 0.47 400 78 0.29 783 0.32 848 0.34 909 0.37 966 0.4 08 0.44 067 0.48 2 0.52 500 757 0.33 82 0.36 883 0.39 94 0.42 995 0.46 046 0.50 092 0.54 36 0.57 Air Volume External Static - in. w.g. 0.90.00.0.20.30.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit Z04 900 067 0.32 5 0.35 6 0.37 205 0.40 247 0.43 287 0.47 326 0.50 365 0.53 000 08 0.36 28 0.39 73 0.4 26 0.44 258 0.48 297 0.5 336 0.54 374 0.58 00 097 0.40 43 0.43 87 0.46 229 0.49 270 0.52 309 0.56 347 0.59 384 0.63 200 5 0.45 59 0.48 202 0.5 244 0.54 284 0.58 323 0.6 360 0.65 397 0.69 300 34 0.50 77 0.53 29 0.56 260 0.60 300 0.63 338 0.67 375 0.7 4 0.75 400 55 0.55 97 0.59 238 0.62 278 0.66 37 0.70 354 0.74 39 0.78 426 0.82 500 77 0.6 28 0.65 258 0.68 298 0.72 336 0.76 373 0.8 409 0.85 443 0.89 HORIZONTAL Air Volume External Static - in. w.g. 0.0 0.20 0.30 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit Z0 900 566 0.3 634 0.6 704 0.8 773 0.20 839 0.23 902 0.25 96 0.28 06 0.3 000 590 0.6 658 0.8 728 0.20 795 0.23 860 0.25 920 0.28 977 0.3 030 0.34 00 65 0.8 685 0.20 754 0.23 820 0.26 883 0.29 94 0.32 995 0.35 046 0.38 200 644 0.2 74 0.23 782 0.26 847 0.29 908 0.33 963 0.36 05 0.39 064 0.42 300 676 0.24 746 0.27 84 0.30 876 0.33 934 0.37 987 0.4 037 0.44 083 0.47 400 73 0.28 782 0.3 847 0.35 907 0.38 962 0.42 03 0.45 060 0.49 05 0.52 500 755 0.33 82 0.36 883 0.39 939 0.43 99 0.47 039 0.50 085 0.54 28 0.57 Air Volume External Static - in. w.g. 0.90.00.0.20.30.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit Z04 900 068 0.33 8 0.36 65 0.38 2 0.4 254 0.44 294 0.47 332 0.50 369 0.54 000 080 0.37 28 0.39 75 0.42 29 0.45 262 0.48 302 0.5 340 0.55 377 0.58 00 094 0.4 4 0.43 86 0.46 230 0.49 272 0.52 3 0.56 349 0.60 386 0.64 200 0 0.45 55 0.48 200 0.5 243 0.54 284 0.58 323 0.6 36 0.66 398 0.70 300 28 0.50 72 0.53 25 0.56 258 0.59 298 0.63 337 0.67 375 0.72 4 0.76 400 48 0.55 9 0.58 233 0.62 274 0.65 34 0.69 353 0.74 39 0.79 427 0.83 500 70 0.6 2 0.64 252 0.68 293 0.72 333 0.76 37 0.8 408 0.86 444 0.9 Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 3
BLOWER DATA - BELT DRIVE - ZGA048 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (heat section, economizer, wet coil, etc.). 2 - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page 6for blower motors and drives and wet coil and options/accessory air resistance data. DOWNFLOW Air Volume External Static - in. w.g. 0.0 0.20 0.30 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit Z02 200 648 0.23 75 0.25 782 0.27 847 0.29 90 0.32 967 0.35 020 0.38 068 0.42 300 68 0.26 748 0.28 84 0.30 878 0.33 937 0.36 992 0.39 043 0.43 089 0.47 400 78 0.29 783 0.32 848 0.34 909 0.37 966 0.4 08 0.44 067 0.48 2 0.52 500 757 0.33 82 0.36 883 0.39 94 0.42 995 0.46 046 0.50 092 0.54 36 0.57 600 798 0.38 860 0.4 99 0.44 974 0.47 026 0.5 074 0.55 9 0.59 6 0.63 700 840 0.43 899 0.46 955 0.49 007 0.53 057 0.57 03 0.6 46 0.66 87 0.70 800 882 0.48 938 0.5 99 0.55 04 0.59 088 0.63 32 0.68 74 0.72 24 0.77 900 924 0.54 977 0.58 027 0.62 075 0.66 20 0.70 63 0.75 203 0.80 242 0.85 2000 965 0.6 06 0.65 064 0.69 0 0.74 53 0.79 94 0.84 233 0.89 27 0.95 Air Volume External Static - in. w.g. 0.90.00.0.20.30.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit Z02 Kit Z05 200 5 0.45 59 0.48 202 0.5 244 0.54 284 0.58 323 0.6 360 0.65 397 0.69 300 34 0.50 77 0.53 29 0.56 260 0.60 300 0.63 338 0.67 375 0.7 4 0.75 400 55 0.55 97 0.59 238 0.62 278 0.66 37 0.70 354 0.74 39 0.78 426 0.82 500 77 0.6 28 0.65 258 0.68 298 0.72 336 0.76 373 0.8 409 0.85 443 0.89 600 20 0.68 24 0.7 280 0.75 39 0.80 357 0.84 393 0.88 428 0.93 462 0.97 700 226 0.74 265 0.79 304 0.83 342 0.87 378 0.92 44 0.96 448.0 482.05 800 253 0.82 29 0.87 329 0.9 366 0.96 402.0 436.05 469.0 502.4 900 280 0.90 38 0.95 355.00 39.05 426.0 459.5 492.20 524.24 2000 309.00 346.05 382.0 47.6 45.2 484.25 55.30 547.35 HORIZONTAL Air Volume External Static - in. w.g. 0.0 0.20 0.30 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit Z02 200 644 0.2 74 0.23 782 0.26 847 0.29 908 0.33 963 0.36 05 0.39 064 0.42 300 676 0.24 746 0.27 84 0.3 876 0.33 934 0.37 987 0.4 037 0.44 083 0.47 400 73 0.28 782 0.3 847 0.35 907 0.38 962 0.42 03 0.45 060 0.49 05 0.52 500 755 0.33 82 0.36 883 0.39 939 0.43 99 0.47 039 0.5 085 0.54 28 0.57 600 798 0.38 860 0.4 98 0.45 97 0.48 020 0.52 067 0.55 0 0.59 52 0.63 700 842 0.43 900 0.47 954 0.5 004 0.54 05 0.57 095 0.6 37 0.65 77 0.69 800 885 0.49 940 0.53 990 0.56 037 0.6 08 0.63 24 0.67 64 0.72 204 0.76 900 928 0.56 979 0.59 026 0.63 070 0.67 3 0.7 53 0.75 93 0.79 23 0.84 2000 969 0.63 07 0.67 062 0.7 04 0.74 45 0.79 84 0.83 222 0.88 259 0.94 Air Volume External Static - in. w.g. 0.90.00.0.20.30.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit Z02 Kit Z05 200 0 0.45 55 0.48 200 0.5 243 0.54 284 0.58 323 0.6 36 0.66 398 0.7 300 28 0.5 72 0.53 25 0.56 258 0.59 298 0.63 337 0.67 375 0.72 4 0.76 400 48 0.55 9 0.58 233 0.62 274 0.65 34 0.69 353 0.74 39 0.79 427 0.83 500 70 0.6 2 0.64 252 0.68 293 0.72 333 0.76 37 0.8 408 0.86 444 0.9 600 93 0.67 233 0.7 273 0.75 33 0.79 352 0.84 390 0.89 427 0.94 463 700 27 0.73 256 0.78 296 0.82 335 0.87 374 0.93 4 0.98 447.03 482.09 800 242 0.8 28 0.86 320 0.9 359 0.96 396.02 433.07 468.3 503.8 900 269 0.9 307 0.95 346.0 383.06 420.2 456.8 49.23 525.29 2000 297 0.99 334.05 372. 409.7 445.23 480.29 54.34 547.4 Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 4
BLOWER DATA - BELT DRIVE - ZGA060 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (heat section, economizer, wet coil, etc.). 2 - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page 6 for blower motors and drives and wet coil and options/accessory air resistance data. DOWNFLOW Air Volume External Static - in. w.g. 0.0 0.20 0.30 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit Z03 600 87 0.39 877 0.42 935 0.45 989 0.48 040 0.52 087 0.56 3 0.60 73 0.65 700 859 0.44 97 0.47 972 0.50 023 0.54 07 0.58 7 0.62 59 0.67 99 0.7 800 902 0.49 957 0.53 008 0.56 057 0.60 03 0.64 47 0.69 88 0.74 227 0.79 900 944 0.56 996 0.59 045 0.63 092 0.68 36 0.72 78 0.77 28 0.82 257 0.87 2000 986 0.63 035 0.67 083 0.7 27 0.76 70 0.8 20 0.86 249 0.9 287 0.97 200 027 0.7 075 0.75 20 0.80 63 0.85 204 0.90 243 0.96 28.02 38.07 2200 069 0.80 5 0.84 58 0.90 200 0.95 239.0 277.07 34.3 350.9 2300 0.90 55 0.95 97.0 237.07 275.3 32.9 348.25 383.3 2400 54.0 96.07 236.3 274.9 3.25 347.32 382.38 47.45 Air Volume External Static - in. w.g. 0.90.00.0.20.30.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit Z03 Kit Z06 600 23 0.69 252 0.73 292 0.77 330 0.8 367 0.85 403 0.89 438 0.94 472 0.98 700 239 0.76 278 0.80 36 0.84 354 0.89 390 0.93 425 0.98 459.02 492.07 800 266 0.83 304 0.88 342 0.93 378 0.98 44.02 448.07 48.2 54.6 900 294 0.92 332 0.97 369.02 404.07 439.2 472.7 504.2 536.26 2000 324.02 360.07 396.3 43.8 465.23 497.27 529.32 560.37 200 354.3 390.8 425.24 459.29 49.34 523.39 554.43 585.48 2200 385.25 420.30 454.36 487.4 59.46 550.5 58.55 6.60 2300 48.37 452.43 485.48 57.53 548.58 578.63 608.68 639.72 2400 45.5 484.56 56.62 547.67 578.72 607.76 637.8 667.85 HORIZONTAL Air Volume External Static - in. w.g. 0.0 0.20 0.30 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit Z03 600 87 0.39 878 0.42 934 0.46 985 0.49 034 0.53 080 0.56 23 0.60 64 0.64 700 86 0.45 98 0.48 970 0.5 08 0.55 065 0.58 08 0.62 50 0.66 90 0.70 800 904 0.5 957 0.54 006 0.57 052 0.6 096 0.65 38 0.69 78 0.73 27 0.78 900 946 0.57 996 0.6 042 0.64 086 0.68 28 0.72 68 0.76 207 0.8 245 0.86 2000 988 0.64 035 0.68 079 0.72 20 0.76 6 0.8 99 0.85 237 0.90 275 0.96 200 028 0.72 073 0.76 5 0.8 55 0.85 94 0.90 23 0.95 268.0 305.07 2200 068 0.8 0.86 5 0.90 90 0.95 227.00 263.06 299.2 336.8 2300 08 0.9 49 0.96 88.0 225.06 26.2 296.8 332.24 367.3 2400 48.02 87.07 224.3 260.8 295.25 330.3 365.38 400.45 Air Volume External Static - in. w.g. 0.90.00.0.20.30.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit Z03 Kit Z06 600 204 0.68 245 0.72 285 0.76 325 0.8 363 0.86 40 0.9 437 0.96 473.0 700 229 0.75 269 0.79 309 0.84 348 0.89 386 0.94 423.00 458.05 493.0 800 256 0.83 295 0.88 334 0.93 372 0.98 409.04 445.09 48.5 55.20 900 283 0.92 322 0.97 360.03 397.08 434.4 469.20 504.25 537.3 2000 32.02 350.07 387.3 424.9 459.25 494.3 528.37 56.42 200 342.3 378.9 45.25 45.3 486.37 59.43 553.49 586.54 2200 372.25 408.3 444.37 479.44 53.50 546.56 579.6 6.67 2300 403.38 438.44 473.5 507.57 54.63 573.69 606.75 638.80 2400 434.52 469.58 503.65 537.7 569.77 60.83 633.88 665.94 Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 5
BLOWER DATA DRIVE KIT SPECIFICATIONS Blower Motor Choice (HP) Model No. Nominal Maximum Nominal Maximum 036.5.5.7 048.5.5.7 060.5.5.7 Drive Kit No. RPM Range Z0 678-035 Z04 964-47 Z02 803-226 Z05 098-490 Z03 906-383 Z06 262-634 NOTE - Using total air volume and system static pressure requirements determine from blower performance tables rpm and motor hp required. Maximum usable hp of motors furnished are shown. In Canada, nominal motor hp is also maximum usable motor hp. If motors of comparable hp are used, be sure to keep within the service factor limitations outlined on the motor nameplate..5 hp motor is required with Z05 and Z06 drive kits. POWER EXHAUST FAN PERFORMANCE Return Air System Static Pressure - in. w.g. Air Volume Exhausted 0.00 865 0.05 785 0.0 70 0.5 630 0.20 545 0.25 450 0.30 350 0.35 240 OPTIONS / ACCESSORIES AIR RESISTANCE - in. w.g. Air Volume Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 6 Wet Indoor Coil Gas Heat Economizer 036-048 060 Medium Input High Input Downflow Horizontal 900 0.0 - - - 0.02 0.02 0.04 0.05 000 0.0 - - - 0.02 0.02 0.04 0.05 00 0.02 - - - 0.02 0.02 0.04 0.06 200 0.02 - - - 0.02 0.03 0.05 0.06 300 0.02 - - - 0.02 0.03 0.05 0.07 400 0.03 - - - 0.03 0.04 0.06 0.07 500 0.03 - - - 0.03 0.04 0.07 0.08 600 0.03 0.04 0.03 0.04 0.08 0.09 700 0.04 0.05 0.03 0.05 0.08 0.0 800 0.04 0.05 0.03 0.05 0.09 0. 900 0.04 0.06 0.04 0.06 0.0 0.2 2000 0.05 0.06 0.04 0.06 0.2 0.3 200 - - - 0.07 0.04 0.06 0.3 0.4 2200 - - - 0.08 0.04 0.07 0.4 0.5 2300 - - - 0.08 0.04 0.07 0.5 0.7 2400 - - - 0.09 0.05 0.08 0.7 0.8
BLOWER DATA CEILING DIFFUSERS AIR RESISTANCE (in. w.g.) Air Volume 2 Ends Open RTD9-65 Step-Down Diffuser Side & 2 Ends Open All Ends & Sides Open FD9-65 Flush Diffuser 800 0.5 0.3 0. 0. 000 0.9 0.6 0.4 0.4 200 0.25 0.20 0.7 0.7 400 0.33 0.26 0.20 0.20 600 0.43 0.32 0.20 0.24 800 0.56 0.40 0.30 0.30 2000 0.73 0.50 0.36 0.36 2200 0.95 0.63 0.44 0.44 CEILING DIFFUSER AIR THROW DATA Air Volume - Effective Throw - ft. Model No. RTD9-65 FD9-65 800 0-7 4-8 000 0-7 5-20 200-8 6-22 400 2-9 7-24 600 2-20 8-25 800 3-2 20-28 2000 4-23 2-29 2200 6-25 22-30 Effective throw based on terminal velocities of 75 ft. per minute. Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 7
ELECTRICAL DATA ZGA036S4 3 TON Voltage - 60hz 208/230V - Ph 208/230V - 3 Ph 460V - 3 Ph 575V - 3 Ph Compressor Rated Load Amps 5.3 8.7 4 3.6 Locked Rotor Amps 70 70 3 27 Outdoor Fan Full Load Amps 0.6 0.45 Motor Power Exhaust () 0.5 HP Full Load Amps.5.5 0.6 0.6 Indoor Blower Horsepower.5.5.5.5 Motor Full Load Amps 4.6 6.6 2. 3.7 2.4 2 Maximum Unit Only 45 25 25 5 5 5 5 Overcurrent Protection With () 0.5 HP Power Exhaust 45 25 25 5 5 5 5 3 Minimum Circuit Ampacity Unit Only 32 7 9 8 9 7 8 With () 0.5 HP 33 8 20 9 0 8 8 Power Exhaust ELECTRICAL DATA ZGA048S4 4 TON Voltage - 60hz 208/230V - Ph 208/230V - 3 Ph 460V - 3 Ph 575V - 3 Ph Compressor Rated Load Amps 20 5.5 4.7 Locked Rotor Amps 99 86 37 34 Outdoor Fan Full Load Amps.7.7 0.9 0.7 Motor Power Exhaust () 0.5 HP Full Load Amps.5.5 0.6 0.6 Indoor Blower Horsepower.5.5.5.5 Motor Full Load Amps 4.6 6.6 2. 3.7 2.4 2 Maximum Unit Only 50 30 30 5 5 5 5 Overcurrent Protection With () 0.5 HP Power Exhaust 50 30 30 5 5 5 5 3 Minimum Circuit Ampacity Unit Only 38 2 23 0 9 9 With () 0.5 HP 40 22 24 2 9 0 Power Exhaust ELECTRICAL DATA ZGA060S4 5 TON Voltage - 60hz 208/230V - Ph 208/230V - 3 Ph 460V - 3 Ph 575V - 3 Ph Compressor Rated Load Amps 22. 3.5 8 5 Locked Rotor Amps 25 09 59 40 Outdoor Fan Full Load Amps.7.7 0.9 Motor Power Exhaust () 0.5 HP Full Load Amps.5.5 0.6 0.6 Indoor Blower Horsepower.5.5.5.5 Motor Full Load Amps 4.6 6.6 2. 3.7 2.4 2 Maximum Unit Only 60 35 35 20 20 5 5 Overcurrent Protection With () 0.5 HP Power Exhaust 60 35 40 20 20 5 5 3 Minimum Circuit Ampacity NOTE - All units have a minimum Short Circuit Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. 2 HACR type breaker or fuse. Unit Only 4 24 26 4 4 9 0 With () 0.5 HP 42 25 27 4 5 0 Power Exhaust 3 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 8
UNIT CLEARANCES - INCHES (MM) UNIT WITH DOWNFLOW ECONOMIZER C OUTDOOR AIR HOOD D B A UNIT WITH HORIZONTAL ECONOMIZER C HORIZONTAL OUTDOOR AIR HOOD D B A Unit Clearance A B C Downflow C Horizontal in. mm in. mm in. mm in. mm in. mm Service Clearance 36 94 36 94 36 94 60 524 36 94 Clearance to Combustibles 36 94 25 25 25 25 Minimum Operation Clearance 36 94 36 94 36 94 60 524 36 94 NOTE - Entire perimeter of unit base requires support when elevated above the mounting surface. Service Clearance - Required for removal of serviceable parts. Minimum Operation Clearance - Required clearance for proper unit operation. D Top Clearance Unobstructed Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 9
OUTDOOR SOUND DATA Unit Model No. Octave Band Linear Sound Power Levels db, re 0-2 Watts - Center Frequency - Hz 25 250 500 000 2000 4000 8000 Sound Rating Number (SRN) (dba) 036 8 78 77 72 68 66 6 77 048 84 80 79 74 70 67 63 80 060 86 82 82 78 74 68 65 83 Sound Rating Number according to ANSI/AHRI Standard 270-2008. SRN is the overall A-Weighted Sound Power Level, (LWA), db (00 Hz to 0,000 Hz). Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 20
WEIGHT DATA Model Number Net Shipping Base Max. Base Max. lbs. kg lbs. kg lbs. kg lbs. kg 036S 484 220 542 246 489 222 547 248 048S 498 226 568 258 503 228 573 260 060S 530 240 602 273 535 243 607 275 Base Unit - The unit with standard heat exchanger NO OPTIONS. Max. Unit - The unit with ALL OPTIONS Installed. (High Input Heat Exchanger, Economizer, etc.) OPTIONs / ACCESSORIES ECONOMIZER Economizer Economizer, Includes Outdoor Air Hood and Barometric Relief Dampers with Hood OUTDOOR AIR Outdoor Air Dampers lbs. Shipping Weights Downflow - ZECON30A- 65 29 Horizontal - ZECON6A- 92 42 Motorized ZDAMP2A- 30 4 Manual ZDAMPA- 23 0 POWER EXHAUST Standard Static Downflow 54 24 GAS HEAT ROOF CURBS - DOWNFLOW Clip Curb kg Horizontal 4 9 Medium Heat (adder over standard heat) 8 4 High Heat (adder over standard heat) 9 9 8 in. height ZCURB40A- 80 36 4 in. height ZCURB4A- 95 43 8 in. height ZCURB42A- 0 50 24 in. height ZCURB43A- 25 57 Standard 4 in. height ZCURB0A- 06 48 CEILING DIFFUSERS Step-Down RTD9-65-R 67 30 Flush FD9-65-R 37 7 Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 2
DIMENSIONS - INCHES (MM) Model CORNER WEIGHTS CENTER OF GRAVITY No. AA BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg in. mm in. mm in. mm in. mm 036 24 56 42 65 5 52 46 66 7 53 29 58 27 58 25 57 39.5 003 37.5 953 23.25 59 25 635 048 28 58 49 68 8 54 53 69 2 55 35 6 3 59 3 60 39.5 003 37.5 953 23.25 59 25 635 060 36 62 58 72 26 57 62 74 29 58 43 65 39 63 39 63 39.5 003 37.5 953 23.25 59 25 635 Base Unit - The unit with NO OPTIONS. Max. Unit - The unit with ALL OPTIONS Installed. (Economizer, high heat, largest blower motor, etc.). BOTTOM POWER ENTRY Holes required for Optional Bottom Power Entry Kit Threaded Conduit Fittings Wire Hole Diameter (Provided in Kit) Use Required in Unit Base (Max.) A /2 ACC 7/8 (23) B /2 24V 7/8 (23) C 3/4 POWER -/8 (29) AA 25-5/8 (65) 5-/8 (30) BB 47-/4 (200) BASE CENTER OF GRAVITY BOTTOM RETURN AIR OPENING 0-7/8 (276) 6-/8 (40) 3-5/8 (346) -/8 (283) DD 24-9/6 (624) A B C BOTTOM POWER ENTRY (See Table) FF 2-/8 (308) 75-7/8 (927) TOP VIEW (Base) BOTTOM SUPPLY AIR OPENING EE 29 (737) 7-3/4 (45) 5-3/4 (46) CC 5-/8 (30) 45-/4 (49) POWER ENTRY 73-3/4 (873) 5-9/6 (4) 36-7/8 (937) (25) Either side 3-/2 (89) FLUE/VENT OUTLET GAS INLET -7/8 (302) 5-3/4 (46) CONDENSATE OUTLET HORIZONTAL SUPPLY 6-/4 (59) HORIZONTAL RETURN 25-3/4 (654) 8-3/8 (23) 5-3/4 (46) (25) 47-/4 BASE (200) END VIEW (25) LIFTING HOLES (For rigging) FRONT VIEW 3-/2 (89) TYP. 6-/2 (65) 7-3/8 (44) 27 (686) 3 (787) END VIEW 0-7/8 (276) Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 22
ACCESSORY DIMENSIONS - INCHES (MM) OUTDOOR AIR HOOD DETAIL FOR OPTIONAL ECONOMIZER (Downflow Applications) 8-/4 (464) 8-/4 (464) 3 (787) 3/4 (9) OPTIONAL OUTDOOR AIR HOOD (Furnished with Economizer) 8-/4 (464) SIDE VIEW OUTDOOR AIR DAMPER HOOD DETAIL FOR OPTIONAL MANUAL OR MOTORIZED OUTDOOR AIR DAMPERS (Downflow or Horizontal Applications) 0-5/8 (270) OPTIONAL OUTDOOR AIR DAMPERS AND PANEL OUTDOOR AIR DAMPER HOOD 42-/2 (080) 6-/2 (49) 4 (356) 22 (559) OUTDOOR AIR DAMPER HOOD (Furnished) SIDE VIEW 0-5/8 (270) Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 23
ACCESSORY DIMENSIONS - INCHES (MM) OUTDOOR AIR HOOD DETAIL WITH OPTIONAL ECONOMIZER AND BAROMETRIC RELIEF DAMPERS (Horizontal Applications) RETURN AIR DUCT INLET (Field Fabricated - Must be sized to accommodate Barometric Relief Hood and Return Air Requirements) OUTDOOR AIR/ BAROMETRIC RELIEF HOOD (Furnished with Economizer) 3 (787) TOP VIEW -7/8 (302) 5-3/4 (46) 6-/2 (65) This opening not used in Horizontal Applications with Economizer HORIZONTAL SUPPLY AIR OPENING 7-3/8 (44) END VIEW HORIZONTAL RETURN AIR OPENING 6 (406) 38-/4 (97) 6 (406) 8-/4 (463) FRESH AIR OPENING EXHAUST OPENING Note - Return Air Duct and Transition must be supported. HORIZONTAL ECONOMIZER LOCATION 73-3/4 (873) BACK VIEW Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 24
ACCESSORY DIMENSIONS - INCHES (MM) CLIP CURB - DOUBLE DUCT OPENING 4-7/8 (378) 3-5/8 (92) NOTE - Roof deck may be omitted within confines of curb. INSULATED FILLER PANELS (3) RETURN OPENING SUPPLY OPENING 20-/4 (54) -3/4 (44) BOTTOM POWER ENTRY 3 (76) 3-7/8 (352) -3/4 (44) 38-3/4 (984) OPENING 42-/4 (073) 9-3/8 (238) 20-/4 (54) 3 (76) 34-/4 (870) OPENING 3-/4 (337) 70-7/8 (800) 30-/8 (765) 8 (203) 4 (356) 8 (457) 24 (60) -3/4 (44) TYPICAL FLASHING DETAIL FOR ROOF CURB DETAIL ROOF CURB GASKET (Supplied with Curb) PACKAGED UNIT -3/4 (44) /2 (3) BASE BOTTOM NAILER STRIP (Furnished) ROOF CURB (Extends around entire perimeter of unit) COUNTER FLASHING (Field Supplied) CANT STRIP (Field Supplied) ROOFING MATERIAL 8 (203) 4 (356) 8 (457) 24 (60) FACTORY INSTALLED PERIMETER WOOD NAILER STRIP RIGID INSULATION (Field Supplied) -3/4 (44) Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 25
ACCESSORY DIMENSIONS - INCHES (MM) STANDARD ROOF CURBS - DOUBLE DUCT OPENING 4-7/8 (378) 3-5/8 (92) INSULATED FILLER PANELS (3) RETURN OPENING SUPPLY OPENING 20-/4 (54) -3/4 (44) BOTTOM POWER ENTRY 3-7/8 (352) -3/4 (44) 32-/6 (84) 38-3/4 (984) OPENING 9-3/8 (238) 70-7/8 (800) 42-/4 (073) 20-/4 (54) 4 (356) -3/4 (44) NOTE - Roof deck may be omitted within confines of curb. TYPICAL FLASHING DETAIL FOR ROOF CURB DETAIL ROOF CURB GASKET (Supplied with Curb) PACKAGED UNIT -3/4 (44) (25) BASE BOTTOM NAILER STRIP (Furnished) ROOF CURB (Extends around entire perimeter of unit) COUNTER FLASHING (Field Supplied) CANT STRIP (Field Supplied) ROOFING MATERIAL 4 (356) FACTORY INSTALLED PERIMETER WOOD NAILER STRIP RIGID INSULATION (Field Supplied) 2 (5) Z-Series Packaged Gas / Electric 3 to 5 Tons / Page 26
ACCESSORY DIMENSIONS - INCHES (MM) COMBINATION CEILING SUPPLY AND RETURN DIFFUSERS STEP-DOWN CEILING DIFFUSER FLUSH CEILING DIFFUSER E F G H H D E F G H H D G C G C 2 (5) 2 (5) L B J A B A K Model Number RTD9-65 A in. 47-5/8 mm 59 B in. 23-5/8 mm 600 C in. -3/8 mm 289 D in. 2-/2 mm 546 E in. 45-/2 mm 56 F in. 22-/2 mm 572 G in. -/2 mm 292 H in. 0-3/4 mm 273 J in. 45-/2 mm 56 K in. 2-/2 mm 546 L in. 7-/8 mm 8 Duct Size in. 8 round mm 457 round Model Number FD9-65 A in. 47-5/8 mm 59 B in. 23-5/8 mm 600 C in. 3-/2 mm 343 D in. 2 mm 533 E in. 45 mm 43 F in. 22-/2 mm 572 G in. -/4 mm 286 H in. 0-/2 mm 267 Duct Size in. 8 round mm 457 round Z-Series Packaged Gas / Electric 3 to 5 Tons/ Page 27
REVISIONS Sections Sound Data Description of Change Revised. Visit us at www.allied-commercial.com For the latest technical information, visit us at www.allied-commercial.com Contact us at -800-738-4000 NOTE - Due to Allied Commercial ongoing commitment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability. Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury. Installation and service must be performed by a qualified installer and servicing agency. 203 Allied Air Enterprises LLC, a Lennox International Inc. Company