PRODUCT CATAL ALOG All rights reserved. No part of this catalog may be reproduced in any form or by any means for commercial purpose, without the prior written permission of Northwest Specialty Hardware Inc.
TABLE OF CONTENTS Introduction 1 NW SecurityBar 2 NW 601,602,603 Door Pulls 4 NW 604,605 Security Mirrors 7 NW 606 Door Stops 12 NW 607 Anti-Ligature Clothes Hooks 14 NW 608 Anti-Ligature Clothes Hooks 16 NW 610 Stainless Steel Seats 21 NW 710 Floor Mount Stool 23 NW 611 Anti-Ligature Toilet Paper Holders 24 NW 613 FM Handcuff Ring 25 NW 614 FWM Handcuff Ring 26 NW 618 Anti-Ligature Detention Shelf 27 NW 619 Anti-Ligature Recessed Shelf 28 NW 620 Anti-Ligature Toilet Tissue Holder 29 NW 621 Anti-Ligature Toilet Tissue Holder 30 NW 622 Anti-Ligature Recessed Soap Dish 31 NW 624 Front Mounted Soap Dish 32 NW 630 3" Utility Hinges 33 NW 631 3" Food Pass Hinges 35 NW 645 4 1/2" Stainless Steel Hinges 38 NW 646 4 1/2" 316 Stainless Steel Hinge 41 NW 650 5" Heavy-Duty Hinges 43 NW 690,691 Food Pass / Cuff Port 45 NW Escutcheon and Key Shield 47 NW Security Pin Torx Screws and Bits 48 NW 800 Hospital Tip Hinges 49
INTRODUCTION TO NORTHWEST Thank you for considering Northwest Specialty Hardware Inc (the "Northwest") as a supplier for your detention hardware and accessory needs. Founded in 2002, Northwest has become the leading manufacturer of premium detention hardware and accessories in North America. Northwest has established a very high reputation and customer satisfaction in the detention industry due to our premium quality, immediate availability, conscientious customer service and competitive pricing. Northwest commitment is Put Customers First. All Northwest products are designed and manufactured to meet or exceed the detention industry standards. Northwest adopts our unique processing technology and cutting edge technique to manufacture NW 645 4-1/2" hinges, and it supports tight tolerances for internal components and mating parts. NW 645 series hinges have superior wear, durability, and long life. NW 645 FMST hinge was tested by an independent laboratory and passed ASTM F1758-03 Grade 1 Test. NW 645 series hinges are superior to other brand hinges in the cycle, impact and overloading performance. NW 645 series hinges are the only hinges on the market today with the custom-made 304 stainless steel pin. NW 645 series hinges dominate the sales market in the detention industry. Northwest is dedicated to designing and manufacturing NW suicide-resistant series products, especially washroom accessories, in order to minimize the risk of patient suicide and enhance the security and safety of psychiatric wards, mental health facilities, and correctional facilities. NW washroom accessories meet the suicide-resistant requirements of Section 12 of ADAAG (Americans with Disabilities Act Accessibility Guidelines). Northwest is an organizational member of the U.S. Psychiatric Rehabilitation Association. Northwest is a registered healthcare vendor with VCS (Vendor Credentialing Service). Northwest is a registered vendor with the federal government and various state and county agencies. With our consistent and devoted efforts, Northwest has achieved the high popularity and customer satisfaction in the behavioral healthcare and correctional industry. 1
Eliminating Ligature Attachment Points and Space for Hiding Items Outstanding Features Suicide Resistant, No Space Between Wall and Bar End Caps for Anti-Ligature Solution Vertical or Horizontal Installation Custom Lengths or L-Corner Bars Available Self-Draining for Wet Applications Handrail to Allow a Full Grip Suitable for Continuous Handrail Open for Contraband Inspection Variable Fastener Spacing for Easy Retrofits 100% Made in the U.S.A. NW SecurityBar for Correctional and Healthcare Facilities Specially Hardened Aluminum Alloy Clear Anodized Surface, Brush Finishing Look 2
NW SecurityBar Description Application: For installation in toilet rooms, shower stalls, at bathtubs, and at other locations required to have NW SecurityBar to provide assistance for persons with disabilities or mobility impairment. The unique design meets the suicide resistant or anti-ligature requirements of ADAAG (Americans with Disabilities Act Accessibility Guidelines). The one piece design resists abuse and does not offer a place to conceal contraband. To facilitate retrofit installations, NW SecurityBar is not pre-drilled for fasteners and offers a continuous mounting surface. This allows adaptation to a variety of mounting conditions where backing, which is critical for proper attachment, may not align with conventional grab bar mounting points. These features make SecurityBar well suited for secure facilities such as Behavioral Health Facilities, Hospitals, Educational Facilities, Airports, Juvenile Detention Facilities, Jails and Prisons, and other public places. Materials: NW SecurityBar is extruded from 6063-T5 aluminum alloy and receive a special treatment providing a clear anodized surface. All edges are radiused and carefully finished. Available Sizes: NW SecurityBar is available from stock in straight lengths of 18", 24", 30", 36",42", 48", 54" and 60". Custom lengths or L-Corner bars are available on special orders. Competitive Advantages: (1) Cost Advantage Northwest is the leading manufacturer of premium detention hardware and accessories. Northwest utilizes our resources and capabilities to create a unsurpassable cost advantage but still maintain the premium quality of SecurityBar Further savings are achieved by taking full advantage of the purchase combination of NW SecurityBar and our entire product line for secure facilities. (2) Manufacturing and Marketing Experience Northwest has been devoting great efforts to manufacturing, marketing and distributing NW SecurityBar since 2003.With our consistent and devoted efforts, Northwest has achieved the high popularity and customer satisfaction in behavioral healthcare and correctional industry. (3 ) Nationwide Delivery Network Northwest has an integrated and nationwide delivery network across North America. Northwest can provide reliable and cost-effective delivery solutions to meet the needs of a wide range of customers and markets. Installation: 1. Determine installation height and location. Locate appropriate backing locations and transfer layout to NW SecurityBar Drill holes 1/32" larger than fastener diameter, 3/4" from bottom of the mounting flange. 2. Before securing bar to wall apply a continuous bead of acrylic latex sealant to back of mounting flange, both top and bottom. Secure to wall and wipe away any excess sealant with a moist cloth. (Note: For security applications epoxy sealant is recommended.) Maintenance: Normal cleaning with a dry cloth or non-acidic detergent is applied to NW SecurityBar maintenance. 3 7/8" To Specify: NW SecurityBar shall be manufactured and distributed by Northwest Specialty Hardware Inc. Special one piece configuration. 1. Material: Extruded 6063-T5 aluminum alloy. 2. Clear anodized surface with brush finish look. 3. Sizes: Reference drawings for lengths and configurations. 4. All exposed edges rounded and finished. 5. End Cap Option: Provide factory installed End Caps. End Caps are recommended for anti-ligature purpose. Self-Draining End Caps are available upon request. 1/4" 3" 11/2" NO FURNISHED BY NORTHWEST SECURITY HEAD FASTENER INTEGRAL MOUNTING FLANGE WALL OR MOUNTING SURFACE 3
NW 601 RAISED PULL 9" long x 2 3/16" Projection Material: Stainless Steel, Investment Cast Raised (Loop) US32D Mounting Screws: Security Oval Hd, 3/8-16 x 3/4" 4
NW 602 RECESSED PULL 4" x 5" x 1" Deep Material: Stainless Steel, Investment Cast Recessed (Flush) US32D Mounting Screws: Security Flat Hd,1/4-20 x 1/2" 5
NW 603 KNOB PULL Material: US32D Mounting Screws: 2 1/4" Dia Knob, 3 1/4" Dia Base, 2 1/4" Projection Stainless Steel Knob Security Flat Hd, 10-24 x 1/2" $14.99 6
NW 604-1 SMALL 1pc SECURITY MIRROR 9 1/2" x 11 1/4" x 1/4" Overall w/8" x 9 3/4" Mirror Surface Material: 18 ga Stainless Steel Sheet Polished to a Mirror Finish Approximating that of Glass 1 pc Mirror Mounting Screws: Security Button Hd,1/4-20 x 3/8" Note: Anchor kit and mirror backplate are available upon request. 7
NW 604-2 SMALL 2pc SECURITY MIRROR 10" x 11 1/2" x 5/16" Frame w/8" x 9 1/2" Mirror Surface Frame: 14 ga Steel w/satin Chrome Finish Mirror Panel: 20 ga Stainless Steel Sheet Polished to a Mirror Finish Approximating that of Glass 2 pc Mirror Mounting Screws: Security Flat Hd,1/4-20 x 1/2" Note: Anchor kit and mirror backplate are available upon request. 8
NW 605-1 LARGE 1pc SECURITY MIRROR 11 1/4" x 17 1/4" x 1/4" Overall, w/ 9 3/4" x 15 3/4" Mirror Surface Material: 18 ga Stainless Steel Sheet Polished to a Mirror Finish Approximating that of Glass 1 pc Mirror Mounting Screws: Security Button Hd, 1/4-20 x 3/8" Note: Anchor kit and mirror backplate are available upon request. 9
NW 605-2 LARGE 2pc SECURITY MIRROR 12 3/8" x 16 3/8" x 5/16" Frame w/10" x 14" Mirror Surface Frame: 14 ga Steel w/satin Chrome Finish Mirror Panel: 20 ga Stainless Steel Sheet Polished to a Mirror Finish Approximating that of Glass 2 pc Mirror Mounting Screws: Security Flat Hd,1/4-20 x 1/2" Note: Anchor kit and mirror backplate are available upon request 10
NW MIRROR BACKPLA CKPLATE. Material: Mounting: For use in easy-and-substantial mirror installation or retrofit application. Mild Steel Plate, 3/16"thk Mirror Backplate Sizes with Matching NW 604-1, NW 604-2, NW 605-1, NW 605-2 Concrete Expansion, Anchor, or Weld On. Red Oxide Primer Note: Discount price for one complete set of the mirror, backplate, and anchor kit. NW 604-1 MIRROR BACKPLATE NW 605-1 MIRROR BACKPLATE 11
NW 606 DETENTION DOOR STOP Material: Mounting: 2" Dia. x 3 1/2" Bumper 5/8-11 x 2 1/2" Post Silicone Rubber Body w/threaded Steel Post Heavy-Duty Floor or Wall Mount Black Embed in Concrete or Masonry 12
NW 606S DETENTION DOOR STOP OP, SHORT Material: Mounting: 2" Dia. x 1 1/2" Bumper 5/8-11 x 2 1/2" Post Silicone Rubber Body w/threaded Steel Post Heavy-Duty Wall or Floor Mount Black Embed in Concrete or Masonry 13
NW 607B CLOTHES HOOK, BOLT-ON 5/8" x 4 5/16" x 3" Projection Material: Stainless Steel Bolt-on, Collapsible US32D Mounting Screws: Security Button Hd, 1/4-20 x 1" 14
NW 607W CLOTHES HOOK, WELD-ON Material: Mounting : 5/8" x 3 1/8" x 3" Projection Stainless Steel Weld-on, Collapsible US32D Weld-on 15
NW 608 CLOTHES HOOK Material: Mounting Screws: 4" x 4" x 2 1/4" Projection Stainless Steel w/nylon Insert 14 ga Slope Top Housing Front Mounted Collapsible Ball-Joint US32D Security Flat Hd, 1/4-20 x 2" 16
NW 608-2S CLOTHES HOOK STRIP, SLOPE TOP Material: Mounting Screws: Features: 6 1/2" x 9 1/2" x 2 1/4" Projection Stainless Steel w/nylon Inserts 14 ga Slope Top Housing Front Mounted Collapsible Ball-Joint US32D Security Flat Hd 1/4-20 x 2" Slope top surface is free from dust and easy-to-clean 17
NW 608-3S CLOTHES HOOK STRIP, SLOPE TOP Material: Mounting Screws: Features: 6 1/2" x 14" x 2 1/4" Projection Stainless Steel w/nylon Inserts 14 ga Slope Top Housing Front Mounted Collapsible Ball-Joint US32D Security Flat Hd 1/4-20 x 2" Slope top surface is free from dust and easy-to-clean $45.99 18
NW 608-4S CLOTHES HOOK STRIP, SLOPE TOP Material: Mounting Screws: Features: 6 1/2" x 18" x 2 1/4" Projection Stainless Steel w/nylon Inserts 14 ga Slope Top Housing Front Mounted Collapsible Ball-Joint US32D Security Flat Hd 1/4-20 x 2" Slope top surface is free from dust and easy-to-clean 19
NW 608-4 CLOTHES HOOK STRIP Material: Mounting Screws: 5 1/2" x 18" x 2 1/4" Projection Stainless Steel w/nylon Inserts 14 ga Flat Top Housing Front Mounted Collapsible Ball-Joint US32D Security Flat Hd 1/4-20 x 2" $46.99 20
NW 610 STAINLESS STEEL SEAT Material: Application: 12"Dia x 1 1/2"Lip 14 ga Stainless Steel Seat With 9 Gauge Mild Steel Reinforcement Plate US32D For use in Construction of Detention Furnishings such as Stools, Desks and Pedestal Tables 21
NW 610 BoltOnSeat TM Features: The Only Bolt-on Seat in Detention Industry; Applicable to all the Detention Stools, Pedestal Table, or Retrofit Assembly; Cost-saving and Easy to Install or Maintain. Seat 12" Dia x 1 1/2" Lip Seat Material: 14 Gauge Stainless Steel Seat with 9 Gauge Mild Steel Fully Welded Plate Seat US32D Pedestal 18" High, 6" x 6" Top Plate, 8" x 8" Mounting Plate Pedestal Material: 2" Schedule 40 Pipe, 9 Gauge Mild Steel Mounting Plate Pedestal USP (Prime Painted) Mounting Hardware: Security Flat Hd, 1/4-20 x 1/2" Option: NW 610 BoltOnSeat TM w/pedestal, BoltOnSeat TM w/top Plate, Secure Bolt, 3/8 x 2 1/2 BH Concrete Expansion Anchor Available upon Request. 22
NW 710FM Floor Mount Stool Seat Seat Material: Seat Pedestal Pedestal Material: Pedestal 12" Dia x 1 1/2" Lip 14 Gauge Stainless Steel Seat with 9 Gauge Mild Steel Reinforcement Plate, Fully Welded US32D 18" High Support, 6" x 6" Top Plate, 8" x 8" Mounting Plate 2 1/2" Schedule 40 Pipe, 9 Gauge Mild Steel Mounting Plate NW Standard Gray Powder Coat Option: 3/8" x 2 1/2" BH Concrete Expansion Anchor Available upon Request Note: Mount along with NW 614 FWM Handcuff Ring to Meet Safety Requirement or Architectural Design. 23
NW 611 BALL TIP, TOILET PAPER HOLDER 4" x 4" x 4" Projection Material: Stainless Steel w/nylon Insert 14 ga Slope Top Housing Front Mounted Collapsible Ball-Joint Ball Tip Lver US32D Mounting Screws: Security Flat Hd, 1/4-20 x 2" Features: For holding toilet paper Anti-Ligature Design conveniently and easily surface-mounted on wall Note: NW 611 with Flat Tip Lever also Available NW 611, Ball Tip NW 611, Flat Tip 24
NW 613WM WALL MOUNT HANDCUFF RING Ring 3 3/8" Outside Diameter, 5/16" Ring Bracket 5 1/4" x 1 1/2" Mounting Bracket, 1/4" Height. Material: Stainless Steel Ring, 12 Gauge Stainless Stain Bracket Mounting Screws: Security Button Hd, 3/8-16 x 1" Applications: Wall Mount for Intensive Use in a Variety of Correctional Facilities and Environments. 25
NW 614FWM FLOOR / WALL MOUNT HANDCUFF RING Ring Base Material: Mounting Screws: Floor Mount or Wall Mount 2 1/2" Outside Diameter, 1/2" Ring 6" x 6" Mounting Plate Stainless Steel, 9 Gauge Mounting Plate Electrolytic Surface Treatment for High Quality Requirments, Resistance from Corrosion, Rust, Hard Water, or Bacteria. Security Button Hd, 3/8-16 x 1" (Not Provided) Option: 3/8" x 2 1/2" BH Concrete Expansion Anchor Available upon Request. Note: Floor Mount along with NW 710 FM Stool to Meet the Safety Requirement or Architectural Design. 26
NW 618 ANTI-LIGATURE TURE SHELF 18" x 8" x 5 1/2" Projection Material: 14 ga Stainless Steel Front Mounted US32D Finish Outside, Satin Finish Inside Features: Fully Welded Single Piece Construction Front Edge Folded under and Welded 1 inch All Edges Ground Smooth for Anti-Ligature Mounting Screws: Security Button Head, 1/4-20 x 1 1/2" $47.99 Option: Optional for Installation over NW608-4 Flat Top Hook Strips to Offer the Unique Cost-Effective Combination for the Shelf and Clothes Hook Strips. 27
NW 619FM RECESSED SHELF, FRONT MOUNT Material: Features: Installation: 18" x 7" x 4" depth 16 ga Stainless Steel Front Mounted Brush Finish Frame Satin Finish Interior Fully Welded Construction All Edges Ground Smooth Install in Wall Opening 16 1/2" x 5 1/2" x 4 1/4" depth Appropriate Wall Anthors 1/4" -20 Button Hd Security Screws (Not Provided) $43.99 28
NW 620 RECESSED TOILET TISSUE HOLDER Overall Internal Material: Features: Installation: 6 1/4" dia. x 4 3/4" depth 5 1/2" dia. x 4 5/16" depth 16 ga Stainless Steel Chase Mounted Exposed Surfaces in Satin Finish Forged one-piece seamless construction Rim of holder beveled to insure tight fit to wall surface $26.99 Back of holder has welded anchor nuts to receive threaded studs. 11 gauge die-formed galvanized steel back plate, reversible for shallow or deep wall installation. 29
NW 621 RECESSED TOILET TISSUE HOLDER Overall 7" x 7" x 4 1/2" depth Internal 5 3/8" dia. x 3 15/16" depth Material: 14 ga Stainless Steel Flange 16 ga Stainless Steel Holder Front Mounted Exposed Surfaces in Satin Finish Screws: Security Button Head, 1/4"-20 x 1" for installation to wall anchors (Not included) Features: Flange welded to holder to ensure a tight fit to wall surface Holder forged one-piece seamless construction Requirement: It is required to use a security caulk around the front edge between the flange and the holder for anti-ligature purpose. $29.99 30
NW 622FM SOAP DISH, FRONT MOUNTED Overall Internal Material: Features: Installation: 7" x 5" x 3" depth 5 5/8" x 3 5/8" x 2 3/4" depth 18 ga Stainless Steel Front Mounted Satin Finish or Brush Finish Forged one-piece seamless construction Rim of soap dish beveled to insure tight fit to wall surface Install in Wall Opening 5 5/8" x 3 5/8" x 2 3/4" depth Appropriate Wall Anthors 1/4" -20 Button Hd Security Screws (Not Provided) $22.99 31
NW 624 FRONT MOUNTED SOAP DISH 5" x 2 1/4" x 2 13/16" Projection Material: 7 ga Stainless Steel Front Mounted Brush Finish Screws: Security Flat Head, 1/4"-20 x 1 1/2" for installation to wall anchors (Not included) Features: Formed from single piece of stainless steel with three drain holes $16.99 Warning: NW 624 Soap Dish is not the anti-ligature product and should not be installed in areas where there is concern for any type of bodily harm. 32
NW 630B 3" x 4" UTILITY HINGE, BOLT-ON 3" x 4" x 1/4" Thick Material: Formed Steel Plate Full Surface, Bolt-on w/o C'Sinks Pin: Fully Welded Ends: Welded and Ground to Appear Solid Bearing: Plain Bearing USP (prime painted) Mounting Screws: Security Button Hd, 3/8-16 x 1" Note: Also available with countersunk holes for flat head screws 3/8-16 x 3/4" (NW 630BCS), and without C'sinks Stainless Steel (NW630BS), and with C'sinks Stainless Steel (NW630BCSS). NW 630B $7.99 for NW 630BCS NW 630BCSS NW 630BCS 33
NW 630W 3" x 4" UTILITY HINGE, WELD-ON Material: Pin: Ends: Bearing: Mounting: 3" x 4" x 1/4" Thick Formed Steel Plate Full Surface, Weld-on Fully Welded Welded and Ground to Appear Solid Plain Bearing USP (prime painted) Weld -on Note: Also available with both short leaf hinge 3" x 3 1/4" x 1/4" thick (NW 630WSL). NW 630W $5.99 for NW 630WSL NW 630WSL 34
NW 631FP FOOD PASS HINGE W/APPLIED STOP 3" x 4" x 1/4" Thick 3/16" Thick Stop Material: Formed Steel Plate Full Surface, Bolt-on Pin: Fully Welded Ends: Welded and Ground to Appear Solid Bearings: Plain Bearing USP (prime painted) Mounting Screws: Security Button Hd, 3/8-16 x 1"!" #$ %&' ( )'*+ &, -. )'*+ &, "/ 0" 35
NW 631FPB FOOD PASS HINGE, BOLT-ON W/ INTEGRAL STOP 3" x 4" x 1/4" Thick Material: Formed Steel Plate Full Surface, Bolt-on Integral or Built-in Stop Pin: Fully Welded Ends: Welded and Ground to Appear Solid Bearing: Plain Bearing USP (prime painted) Mounting Screws: Security Flat Hd, 3/8-16 x 3/4" Note: Also available in stainless steel, US32D Finish (NW 631FPBS) NW631 FPB 36 NW631 FPBS
NW 631FPW FOOD PASS HINGE, WELD-ON W/ INTEGRAL STOP Material: Pin: Ends: Bearings: Mounting: 3" x 4" x 1/4" Thick Formed Steel Plate Full Surface, Weld-on Integral or Built-in Stop Fully Welded Welded and Ground to Appear Solid Plain Bearing USP (prime painted) Weld-on NW 631FPW Note: Also available in stainless steel, US32D Finish (NW 631FPWS) NW 631FPWS 37
NW 645FM STAINLESS STEEL HINGE 4 1/2" x 4 1/2" x 3/16" Thick Material: Stainless Steel, Investment Cast Full Mortise, Hospital Tip US32D Pin: Stainless Steel, Concealed & Non-Removable Bearings: Anti-Friction Bearings, Maintenance-Free Capacity: 300lb Door (3 Hinges) Mounting Screws: Security Flat Hd, 1/4-20 x 1/2" Template: ANSI/BHMA A156.7 38
Material: NW 645FMST STAINLESS STEEL HINGE W/ SECURITY STUD 4 1/2" x 4 1/2" x 3/16" Thick Stainless Steel, Investment Cast Full Mortise, Hospital Tip w/ Security Stud US32D Pin: Stainless Steel, Concealed & Non-Removable Bearings: Anti-Friction Bearings, Maintenance-Free Capacity: 300lb Door (3 Hinges) Mounting Screws: Security Flat Hd, 1/4-20 x 1/2" Template: ANSI/BHMA A156.7 Note: NW 645FMST meets and surpasses ASTM F1758-03 Grade 1 criteria. Test results from an independent testing laboratory are available upon request. Grade 1 39
NW 645ETH ELECTRIC TRANSFER HINGE 4 1/2" x 4 1/2" x 3/16" Thick Material: Stainless Steel, Investment Cast Electric Transfer Hinge Full Mortise, Hospital Tip US32D Wiring: Color Coded Wires (5) 18 ga, UL Recognized Capacity: Non-Load Bearing Mounting Screws: Security Flat Hd, 1/4-20 x 1/2" Handing: Non-Handed, Reversible Template: ANSI/BHMA A156.7 Note: 6 coded wires are available upon request. 40
NW 646HD 316 STAINLESS STEEL HEAVY VY-DUTY HINGE NW 646 HD 316 Stainless Steel Heavy-Duty Hinge with Security Studs is designed and manufactured based on the feedback and requirements of the US Department of State. NW 646 HD Hinge has been installed on the doors of the United States Embassies around the world since 2012. Both hinge leaf and pin of NW 646 HD Hinge are made of 316 stainless steel, which is considerably more resistant to corrosion and oxidation than the 304 family of alloys. NW 646 HD Hinge is the only security hinge on the market today with the custom-made 316 stainless steel pin. This is an important advantage for conditions that require resistance to extreme environmental conditions, such as moist conditions when exposed to moist salty air near the ocean or extreme temperature changes. The bearing of NW 646 HD Hinge is custom-made in Germany and is exclusive to Northwest Specialty Hardware Inc.. This bearing has superior properties of heavy-duty, anti-friction and maintenance-free. The load capacity of NW 646 HD Hinge is 600 lb. with three hinges, twice the load capacity of any other 4-1/2 inch hinge in the detention industry, as measured by an independent laboratory. NW 646 HD Hinge offers a higher level of physical security and force protection. NW 646 HD Hinge has proven excellent performance in highly-secured environments and extreme climate conditions. NW 646 HD Hinge has the same installation template as NW 645 FMST Hinge which is the best selling hinge in the detention industry. NW 646 HD Hinge is the ideal replacement or substitute for any other brand hinges in order to meet higher security standards and withstand extreme climate conditions. 41
Material: NW 646HD 316 STAINLESS STEEL HEAVY VY-DUTY HINGE 4 1/2" x 4 1/2" x 3/16" Thick 316 Stainless Steel, Investment Cast Full Mortise, Hospital Tip w/ Security Stud US32D Pin: 316 Stainless Steel, Concealed & Non-Removable Bearings: Heavy-Duty Bearings, Custom-Made in Germany, Anti-Friction, Maintenance-Free Capacity: 600lb Door (3 Hinges) Mounting Screws: Security Flat Hd, 1/4-20 x 1/2" Template: ANSI/BHMA A156.7 Note: NW 646 HD is made of grade 316 stainless steel and heavy-duty bearings for maximum strength and corrosion resistance. NW 646 HD provides a high level of physical security and force protection. NW 646 HD is applied to the United States Embassies around the World. 42
NW 650 HEAVY VY-DUTY HINGE, WELD-ON 5" x 6" x 1/2" Thick (Full Leaf) 5" x 5" x 1/2" Thick (Short Leaf) Material: Cold-rolled Steel Full Surface (FS Series) Half-surface (HS Series) Pin: Hardened Alloy Steel, Concealed and Non-Removable Bearing: Heavy-Duty Thrust & Radial Bearings Anti-Friction, Maintenance-Free Capacity: 600 lb. door (2 hinges) Mounting : Weld-on USP (prime painted) NW 650FSW FULL SURFACE, WELD-ON NW 650HSW HALF SURFACE, WELD-ON $19.99 for NW 650HSW NW 650FSW-SL FULL SURFACE, SHORT LEAF 43
NW 650 HEAVY VY-DUTY HINGE, BOLT-ON 5" x 5" x 1/2" Thick (Short Leaf for All Bolt-on Hinges) Material: Cold-rolled Steel Full Surface (FS Series) Pin: Hardened Alloy Steel, Concealed and Non-Removable Bearing: Heavy-Duty Thrust & Radial Bearings Anti-Friction, Maintenance-Free Capacity: 600 lb. door (2 hinges) Mounting : Bolt-on USP (Prime Painted) Note: Also available in stainless steel, US32D finish NW 650FSWS and NW 650FSWS NW 650FSB FULL SURFACE, BOLT-ON NW 650FSWS WELD-ON, STAINLESS STEEL NW 650FSBS BOLT-ON, STAINLESS STEEL 44
NW 690 FOOD PASS / CUFF PORT Available in Mechanical Lock Version (w/ Lock Prep), PadLock Version (w/ PadLock Prep), Pad Lockable 5" Slide Bolt Version (w/ Slide Bolt). Applicable to Hollow Metal or Wood Doors. Locks not supplied. 100% made in U.S.A.. 304 Stainless Steel Food Pass available upon request. NW 690 Food Pass w/ Lock Prep manufactured upon customer specific lock dimensions. Features: Fully Adjustable to fit 1 3/4" or 2" Door Applications. Available in Mechanical Lock, PadLock or Slide Bolt versions. Food Pass or Cuff Port Material: Welded Steel Assembly, 10 ga Frame with 3/16" Door Hinges: 3" Hinge with 90 degree Stop Frame 15" H x 21" W Clear Opening: 6" H x 15" W Note: 304 stainless steel food pass available upon request. NW 690 FOOD PASS W/ LOCK PREP NW 690 FOOD PASS W/ SLIDE BOLT 45 NW 690 FOOD PASS W/ PADLOCK PREP
NW 691 ANTI-LIGATURE TURE FOOD PASS NW 691 Anti-Ligature Food Pass w/ Lock Prep is designed and manufactured based on the client feedback and requirements for challenging Mental Healthcare environments. NW 691 Anti-Ligature Food Pass is 100% made in the U.S.A.. Material: Frame Opening: Hinges: Features: Welded Steel Assembly, 10 ga Frame with 3/16" Door Food Pass or Cuff Port Kits 15" H x 21" W 6" H x 15" W 3" Hinge with 90 Degree Stop USP (Prime Painted) Fully Adjustable to fit 1 3/4" or 2" Door Applications Specially Designed for Anti-Ligature Purpose Rounded Edges Inside and Outside Hinges with Rounded Corners All Welds Ground Smooth Dome Lock Cover Aluminum Handle Cover NW 691 FOOD PASS W/ LOCK PREP 46
ESCUTCHEON CHEON & KEY SHIELD NW ESCUTCHEON SINGLE WING, W/O C'SINKS NW ESCUTCHEON SINGLE WING, W/ C'SINKS NW KEY SHIELD NW ESCUTCHEON DOUBLE WING, W/O C'SINKS NW ESCUTCHEON DOUBLE WING, W/ C'SINKS 47
SECURITY PIN TORX SCREWS & BITS All the security pin torx screws and bits are available upon request. 48
NW 845HW HEAVY WEIGHT HINGE W/ HOSPITAL TIP 4 1/2" x 4 1/2" x 0.18" Thick Material: 304 Stainless Steel (SS) Full Mortise, Square Corner US32D Bearing Type: Ball Bearing Pin Type: Hospital Tip, Stainless Steel Non-Removable Pin (NRP) Load Capacity: 250lb Door (3 Hinges) Mounting Screws: Machine Screw, 1/2 x 12-24 FH Wood Screw, 1 1/4 x 12 FH Standard: ANSI/BHMA A156.1 Features: Hospital Tip (HT) prevents hanging any objects on the tip of the hinge. HT hinges with Non-Removable Pin (NRP) are used in medical or security areas and psychiatric facilities to prevent tampering or injury. Application: Heavy Weight Stainless Steel hinges are permitted for use on wide and heavy doors or doors with heavy use or unusual stress. They can also be used on listed fire rated or labeled door openings. 49
NW 845HWSC HEAVY WEIGHT SWING CLEAR HINGE W/ HOSPITAL TIP 4 1/2" x 4 1/2" x 0.18" Thick Material: 304 Stainless Steel (SS) Swing Clear, Full Mortise US32D Bearing Type: Ball Bearing Pin Type: Hospital Tip, Stainless Steel Non-Removable Pin (NRP) Load Capacity: 250lb Door (3 Hinges) Mounting Screws: Machine Screw, 1/2 x 12-24 Wood Screw, 1 1/4 x 12 Standard: ANSI/BHMA A156.1 Features: (1) Hospital Tip (HT) prevents hanging any objects on the tip of the hinge. HT hinges with Non-Removable Pin (NRP) are used in medical or security areas and psychiatric facilities to prevent tampering or injury. (2) Swing Clear (SC) hinges are designed to swing the door completely clear of opening when door is opened 95 degree. Swing Clear hinges allows maximum clearance for passage of beds, tables, wheelchairs, or other equipment through door openings. Application: Heavy Weight Swing Clear hinges are recommended for use on high frequency and/or heavy wood or metal doors in schools, hospitals or other public buildings where heavy traffic is experienced. 50