ST TST. Automatic Sliding Door Systems

ST TST Automatic Sliding Door Systems

ST TST AUTOMATIC SLIDING DOOR SYSTEMS CONTENT General information Sliding doors Telescopic sliding doors 3 Operator data 4-5 ST FLEX GREEN energy efficiency in elegant design (double glazing) 6-7 ST FLEX SECURE sliding door with intruder protection (single or double glazing) 8 ST FLEX with FLEX fine-frame profiles (single or double glazing) 9 ST - G with fine-frame profiles (single or double glazing) 10 ST - S with robust aluminium framing (single glazing) 11 ST MANET with MANET single-point fixings for full-glass doors (single glazing) 12 ST - AP frameless door leaves and side panels (single glazing) 13 TST FLEX with FLEX fine-frame profiles (single or double glazing) 14 Determination of door panel size 16 Accessories plus secondary closing edge safety 17-18 O SLIDING DOOR COMPONENTS 100 150 4 5 6 6 1 2 2 3 3 B 2 1 Unsupported header with track rail, drive unit and control unit 2 Sliding door panel 3 Stationary side screens (these screens are not required for installation between extending wall faces or similar) 4 Fanlight or solid cover 5 Activator (e. g. motion detector) including safety sensors to monitor the passage area 6 EN 16005, sensors to monitor secondary closing edges B O Clear passage width Clear passage height System width eight of fanlight System height

TE COMPLETE RANGE OF SLIDING DOORS COMBINED IN ONE SYSTEM The ES 200 operator technology sets new trends The Automatic sliding door range is both technologically advanced and flexible in construction. The ES 200 is a slimline unit with exceptional performance and various functions to suit your project and door type. Tested to 1,000,000 cylces, the ES 200 is a high quality, high performing modular automatic sliding door operator unit giving reliable performance. Additional modules and options facilitate made-to-measure solutions for automatic sliding doors. Select the door panel system for your requirements EN 16005 automatic sliding doors and telescopic sliding doors provide all applications for the individual design of your entrance area. No matter if you prefer an elegant full-glass application with a compact operator and MANET singlepoint fixings or a rather functional and robust frame structure, the ES 200 door system is the suitable application for your entrance. ST ES 200 systems not only meet all requirements, they also create new standards when it comes to functional range, motion paths, design, stability and heat insulation. We offer our doors with EN 16005 compliant safety components as indicated on pages 18. The required safety measures result from the respective risk analysis. Features and benefits Unsurpassed performance scope Easily adaptable to your individual requirements Emergency exit and escape route doors are equipped with a redundant operator, an additional control unit for safety purposes and a self-monitoring motion detector Excellent cost effectiveness and reliability thanks to established components and quality-assured production Numerous adjustable parameters Various standard connection facilities Obstacle self-detection and automatic reversing Delivery of "ready for installation" systems, mounting and commissioning if desired Manufactured according to the latest state of technology and compliant with all regulations Optional: individual burglary control Our commitment to a sustainable future Environmentally-conscious behaviour is one of our guiding principles. 's aim is to ensure energy-saving and resource-conserving production, a high recycling ratio and the longevity of our high-quality products. On product level, we use Environmental Product Declarations (EPD) to calculate the sustainability of buildings. These declarations are based on a holistic life cycle assessment. Please find the full EPD at www.dorma.com. 3

OPERATOR DATA ES 200 Door parameters ES 200 Single-panel sliding door Clear passage width () 1) Max. door-panel weight Double-panel sliding door Clear passage width () 1) Max. door-panel weight Clear passage height 1) 700 3000 mm 1 x 200 kg 800 3000 mm 2 x 160 kg 2100 3000 mm Door parameters ES 200 Double-panel sliding door, opening to one side 4-panel sliding door, opening to both sides Clear passage height* 1) Other dimensions on request. Clear passage width () 1) Max. door-panel weight Clear passage width () 1) Max. door-panel weight 800 2400 mm 2 x 75 kg 1400 4000 mm 4 x 75 kg 2100 3000 mm Designs ES 200 Profile systems ST FLEX GREEN fine-frame profile 3 ST FLEX SECURE fine-frame profile 3 FLEX fine-frame profile 3 ST-G fine-frame profile 3 ST-S robust frame profile 3 ST-AP frameless 3 MANET single-point fixing max. clear passage width () single-panel version = 1600 mm double-panel version = 2000 mm Not suitable for telescopic doors 3 Operator height/depth 100 mm x 180 mm 3 150 mm x 180 mm 3 Floor-integrated guide rail Surface-mounted installation without floor guide rail (consider wind load and burglary control) 3 Technical specifications Suitable for application in emergency exits and escape routes 3 Max. opening and closing force 150 N 3 Opening speed (incremental setting) 10 75 cm/s Closing speed (incremental setting) 10 50 cm/s old-open time 0 180 s Power supply/frequency 230 V, 50/60 z Power consumption 250 W Class of protection IP 20 Admissible temperature -20 to +60 C Admissible humidity (relative) max. 93 % (non condensing) Tested according to Low Voltage Directive 3 Manufactured to ISO 9001 3 3 standard optional - no 4

Basic Module (BM) ES 200 Modular design Basic Module (BM) Microprocessor control 3 Function programs Off Automatic Permanent Open Partial Open Exit Only Night-/Bank Function 3 Automatic reversing 3 Connection for electromechanical locking device (bistable) 3 Connection for safeguarding of passage area (on both sides) 3 Equipped in accordance with EN 16005 3 Adjustment of all basic parameters via integrated display and keys 3 Parametrisation via handheld 3 Emergency opening/closing (only with rechargeable battery pack) Emergency operation via rechargeable battery pack (only with rechargeable battery pack) Synchronous operation 3 24 V output for external accessories 3 Read-out error log with error codes 3 DCW bus connection (Protocol Connect and Work) 3 Function Module (FM) - optional Pharmacy Function 3 Door status contact (3 x) 3 Safeguarding of main and secondary closing edge/s Bell contact 3 Airlock control 3 Secondary Edge Function Module - optional The function module provides tested monitoring of the secondary closing edges for compliance with EN 16005 Additional equipment Electromechanical locking device (bistable) Manual lock release for electromechanical locking device Light curtains Rechargeable battery pack (emergency opening/closing) USV emergency power supply unit (external) Module for coupling to LON/LAN building control system 3 standard optional - no 5

ST TST AUTOMATIC SLIDING DOOR SYSTEMS ST FLEX GREEN, ENERGY EFFICIENCY IN ELEGANT DESIGN Features The slender ST FLEX Green profile system is based on the FLEX profile system and provides thermal insulation in conjunction with excellent energy-saving features. Elegant fine-frame design igh stability and rigidity Protection against draughts via circumferential seals Select secondary edge safety solution to meet EN 16005 from: - full height pocket screens - glazed barriers - presence sensors See page 18 O ST Flex Green with fanlight System dimensions and max. door-panel weight 2 x + 60 mm 1 x 200 kg 2 x + 120 mm 2 x 160 kg 2 x + 80 mm 1 x 200 kg 2 x + 160 mm 2 x 160 kg 20 180 50 Corridor mounting with side screens, 111 operator 100 mm 47 * not considering the width of the door post 180 180 100 Thermal separation 50 47 6047 111 111 111 Floor recess 37 105 Key eight of fanlight Clear passage height System height B System width 45 Clear passage width 65 6 Finished Floor Level 6 40 60 O 100 20 20 13 20 ES 200 without side screens with side screens Single-panel version* Double-panel version Min. system Max. door-panel Min. system Max. door-panel width (B) = weight width (B) = weight 6 Operator

Important customer benefits at a glance Very low UD-values from Glass panes with rugged but 1.4 to max. 1.8 (thermal transmission co-efficient) Tested quality with ift Rosenheim approval Compliant with the German energy-saving regulation (EnEV 2009) Sustainable, reliable and energy-saving system Interior and entrance doors in the same design to harmonise with the building's overall look Individual UD-value certificates for each ST FLEX Green door system elegant frames Installation project coordinated by the Projects Team Installed and commissioned by s highly skilled engineer team to meet the requirements of BS EN 16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods The full range of performance functions for the ES 200 automatic sliding door operator (tested to 1,000,000 cycle) The ST FLEX Green fulfils the requirements of the latest German energy-saving regulation (EnEV 2009) and harmonises perfectly with the existing sliding door range. Even the smallest ST FLEX Green door system meets the requirements of the German EnEV 2009, which stipulates a certain U D-value (thermal transmission co-efficient) for complete door systems. orizontal section of lintel-mounted single-panel version 68 52 42 26 Thermal separation 46 Double-panel version with side screen Thermal separation 7

ST TST AUTOMATIC SLIDING DOOR SYSTEMS ST FLEX SECURE SLIDING DOOR WIT ANTI-INTRUDER PROTECTION Features Burglar resistant fine framed automatic door system Tested burglar resistance WK2 Secure 4-point locking device Monitored battery back-up system suitable for use on emergency escape routes Special burglar resistant laminated safety glass Select secondary edge safety solution to meet EN 16005 from: - full height pocket screens - glazed barriers - presence sensors See page 18 Important customer benefits at a glance Excellent intruder protection Appealing fine frame profiles Functionaility as a high usage automatic sliding door in normal use In contrast to similar security doorsets, there are no visible barriers. Thus, your frontage remains as transparent and inviting as ever without any negative effect on its appearance Installation project coordinated by the Projects Team Installed and commissioned by s highly skilled engineer team to meet the requirements of BS EN 16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods The full range of performance functions for the ES 200 automatic sliding door operator (tested to 1,000,000 cycle) Wall connection Unlocking of sliding panel Wall connection Wall connection Wall connection Evidence of Performance Burglar Resist ance Test Re port 10-001154-PB01- C01-05-en-01 Wall connection Client Gmb + Co. KG Platz 1 Basis 58256 Ennepetal Germany DIN V ENV 1627 : 1999 Windows, doors, shutters Burglar resistance - Requirements and classification Wall connection DIN V ENV 1628 : 1999 Security feature inside operator DIN V ENV 1629 : 1999 Product Designation Burglar resistance sliding door system, WK2 ST FLEX SECURE DIN V ENV 1630 : 1999 Test report 212 39011 dated 25 February 2010 Representation Overall dimensions (W x ) (Frame) Material, system Attack side Type of opening Glazing ardware Installation Special features 5150 mm x 3160 mm Aluminium, profile system ST FLEX automatic operator ES200 External side double leaf, sliding Class P4 A as per DIN EN 6 Multi-point locking system, type 3 pivoting bolt lock with 4 swing bolts as per DIN 18251 Class 4; Profile cylinder as per DIN 18252 P2BZ; continuously closing leaf; continuously coupling rim ST FLEX; continuously safety catch in drive system; continuously guide rail According to installation instructions from company Gmb + Co. KG -/- Instructions for use This test report serves to demonstrate burglar resistance. Validity The data and results given refer solely to the described and tested specimen. Testing to burglar resistance does not allow any statement to be made on further characteristics of the present structure regarding performance and quality. In deviation from the test type, the following dimensional changes are permitted: width +10% and 20% height +10% and 20% Floor guide Burglar resistance Christian Kehrer, Dipl.-Ing. (F) ead of Testing Department 1 Object 2 Procedure 3 Detailed results 4 Evaluation Annex 1 ( pages) Annex 2 (5 pages) 40 mm mm mm 05-08 / 367 8 mm mm mm ST FLEX/FST FLEX SECURE, GB 3 40 mm 40 mm Contents The report comprises a total of 54 pages. 40 mm ift Rosenheim 17 February 2011 Robert Krippahl, Dipl.-Ing. (F) Operating Product Officer Building Components The ift Guidance Sheet "Conditions and Guidance for the Use of ift Test Documents" applies. The cover sheet can be used as abstract. 40 mm Notes on publication Resistance Class 2 Main closing edge

ST FLEX WIT FLEX FINE-FRAME PROFILES Features Attractive glass surfaces thanks to slender frames igh stability and torsional rigidity Low damping behaviour (k-value) of frame due to double-glazing Excellent insulation features thanks to interlocking side seals and top and bottom seals Select secondary edge safety solution to meet EN 16005 from: - full height pocket screens - glazed barriers - presence sensors See page 18 Important customer benefits at a glance The full range of performance functions for the ES 200 automatic sliding door operator (tested to 1,000,000 cycle) Installation project coordinated by the Projects Team Installed and commissioned by s highly skilled engineer team to meet the requirements of BS EN 16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods System dimensions and max. door-panel weight Operator ES 200 without side screens with side screens Single-panel version* Min. system width (B) = 2 x + 50 mm 2 x + 100 mm * not considering the width of the door post Double-panel version Max. Min. system width door-panel weight (B) = 1 x 200 kg 1 x 200 kg 2 x + 100 mm 2 x + 180 mm Max. door-panel weight 2 x 160 kg 2 x 160 kg ST-Flex with fanlight O 62 180 Glass panes Toughened safety glass Laminated safety glass, 8 mm Iso 22 double-glazing (4/14/4) Special glazing Clear passage height () Determination of clear passage height (mm) depending on the clear passage width (mm) and the glazing: See diagrams on pages 16 Corridor mounting with side screens, operator 100 mm bis 5 m: 36 ab 5 m: 53 180 B 39 47 30 42 max. 8 max. 8 60 100 111 orizontal section with side screen 92 6 47 OFF 9

ST-G Features Fine framed door leaves Single glazed only Select secondary edge safety solution to meet EN 16005 from: - full height pocket screens - glazed barriers - presence sensors See page 18 Important customer benefits at a glance The ES 200 automatic sliding door operator provides both quality and assurance, having been tested to 1,000,000 cycles ST-G can be tailor made in the UK to suit your individual needs Installation project coordinated by the Projects Team Installed and commissioned by s highly skilled engineer team to meet the requirements of BS EN 16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods System dimensions and max. door-panel weight Operator ES 200 without side screens with side screens Single-panel version* Min. system width (B) = 2 x + 50 mm 2 x + 100 mm * not considering the width of the door post Double-panel version Max. Min. system width door-panel weight (B) = 1 x 200 kg 1 x 200 kg 2 x + 100 mm 2 x + 180 mm Max. door-panel weight 2 x 160 kg 2 x 160 kg Glass panes Toughened safety glass Laminated safety glass, 8 mm Special glazing Clear passage height () Determination of clear passage height (mm) depending on the clear passage width (mm) and the glazing: See diagrams on page 16 Corridor mounting with side screens, operator 100 mm 100 FANLIGT EIGT 20 25 OPERATOR COVER IN FULLY OPEN POSITION 53 180 OVERALL FRAME EIGT CLEAR OPENING EIGT (2500 MAX RECOMMENDED) LM GIRDER OUTSIDE COMBINED IR ACTIVATION & PRESENCE (SAFETY) SENSOR 59 LM GIRDER FIXING BRACKET DETAIL orizontal section with side screen INSIDE OUTSIDE 5 5 FIXED SCREEN CLEAR OPENING WIDT FIXED SCREEN OVERALL FRAME WIDT STRUCTURAL OPENING WIDT 10

6 ST TST AUTOMATIC SLIDING DOOR SYSTEMS ST-S Features Combined with laminated or toughened safety glass Select secondary edge safety solution to meet EN 16005 from: - full height pocket screens - glazed barriers - presence sensors See page 18 Important customer benefits at a glance Robust framing for high traffic, high usage environments The ES 200 automatic sliding door operator provides both quality and assurance, having been tested to 1,000,000 cycles ST-S can be tailor made in the UK to suit your individual needs Installation project coordinated by the Projects Team Installed and commissioned by s highly skilled engineer team to meet the requirements of BS EN 16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods System dimensions and max. door-panel weight Operator ES 200 without side screens with side screens Single-panel version* Min. system width (B) = 2 x + 50 mm 2 x + 100 mm * not considering the width of the door post Double-panel version Max. Min. system width door-panel weight (B) = 1 x 200 kg 1 x 200 kg 2 x + 100 mm 2 x + 180 mm Max. door-panel weight 2 x 160 kg 2 x 160 kg Glass panes Toughened safety glass Laminated safety glass, 8 mm Iso 22 double-glazing (4/14/4) Special glazing Clear passage height () Determination of clear passage height (mm) depending on the clear passage width (mm) and the glazing: See diagrams on page 16 orizontal section with side screen STRUCTURAL OPENING WIDT OVERALL FRAME WIDT Corridor mounting with side screens, operator 100 mm JAMB TO JAMB INSIDE MOVEMENT MOVEMENT OUTSIDE STRUCTURAL OPENING EIGT OVERALL FRAME EIGT CLEAR OPENING EIGT 100 FANLIGT 180 25 COVER IN FULLY OPEN POSITION COMBINED IR ACTIVATION & PRESENCE (SAFETY) SENSOR INSIDE 45 TYP. FIXED SCREEN WIDT See Detail OUTSIDE 100 CLEAR OPENING WIDT 100 FIXED SCREEN WIDT 45 TYP. 100 TYP. 7 TYP. 45 TYP. 11

ST MANET, WIT MANET SINGLE-POINT FIXINGS FOR FULL-GLASS DOORS Features For interior doors Weightless design thanks to unobtrusive stainless steel single-point fixings Versatile component range with various fitting options for walls, floors and ceilings, and to link glass elements Select secondary edge safety solution to meet EN 16005 from: - full height pocket screens - glazed barriers - presence sensors See page 18 Important customer benefits at a glance The ES 200 automatic sliding door operator provides both quality and assurance, having been tested to 1,000,000 cycles ST MANET can be tailor made in the UK to suit your individual needs Installation project coordinated by the Projects Team Installed and commissioned by s highly skilled engineer team to meet the requirements of BS EN 16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods ST MANET with fanlight System dimensions and max. door-panel weight Operator Single-panel version* Min. system width (B) = Max. door-panel weight ES 200 without side screens 2 x + 70 mm 1 x 200 kg with side 2 x + 100 mm 1 x 200 kg screens * not considering the width of the door post Double-panel version Min. system width (B) = Max. door-panel weight 2 x + 140 mm 2 x 160 kg 2 x + 140 mm 2 x 160 kg O 10 20 53 180 Corridor mounting with side screens, operator 100 mm Glass panes Toughened safety glass (TSG) 10 mm Special glazing Clear passage height () Determination of clear passage height (mm) depending on the clear passage width (mm) and the glazing: see diagrams on page 16 Please consider the limited opening dimensions on application of MANET single-point fixings: Singlepanel version max. Doublepanel version max. Clear passage width () Clear passage height () Clear passage width () Clear passage height () 1600 mm 2500 mm 2000 mm 2500 mm +2.5 53 180 9-20 111 100 orizontal section with side screen 4.5 20 6 27 OFF B 5 (B-)/2 60 10 4 /2+58 12

ST-AP Features Frameless door leaves with top and bottom rails or manet patch fittings Frameless door leaves with maximum visual transparency Select secondary edge safety solution to meet EN 16005 from: - full height pocket screens - glazed barriers - presence sensors See page 18 Important customer benefits at a glance The full range of performance functions for the ES 200 automatic sliding door operator (tested to 1,000,000 cycles) Tailored sizes and bespoke manufacture in the UK to suit your project Installation project co-ordinated by the Projects Team Installed and commissioned by s highly skilled engineer team to meet the requirements of BS EN 16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods System dimensions and max. door-panel weight Single-panel version* Operator Min. system Max. door-panel width (B) = weight ES 200 without side 2 x + 50 mm 1 x 200 kg screens with side 2 x + 100 mm 1 x 200 kg screens * not considering the width of the door post Double-panel version Min. system width (B) = Max. door-panel weight 2 x + 100 mm 2 x 160 kg 2 x + 180 mm 2 x 160 kg Corridor mounting with side screens, operator 100 mm Glass panes Toughened safety glass Laminated safety glass, 8 mm Special glazing Clear passage height () Determination of clear passage height (mm) depending on the clear passage width (mm) and the glazing: See diagrams on page 16 STRUCTURAL OPENING OVERALL FRAME EIGT FANLITE EIGT 100 CLEAR OPENING EIGT orizontal section with side screen OVERALL STRUCTURAL OPENING (SW) OVERALL FRAME DIMENSION (OW) FIXED SCREEN DIMENSION (FS) DOOR OPENING (DO) FIXED SCREEN DIMENSION (FS) INSIDE MOVEMENT MOVEMENT MOVEMENT 36 OUTSIDE 25 CLEAR OPENING (CW) 13

TST FLEX WIT FLEX FINE-FRAME PROFILES Features Attractive glass surfaces thanks to slender frames igh stability and torsional rigidity Low damping behaviour (k-value) of frame due to ISO glazing (double-glazing) Excellent insulation features thanks to interlocking side seals and top and bottom seals Select secondary edge safety solution to meet EN 16005 from: - full height pocket screens - glazed barriers - presence sensors See page 18 Important customer benefits at a glance Allows maximum opening width to be achieved thereby easing traffic flow Installation project coordinated by the Projects Team Installed and commissioned by s highly skilled engineer team to meet the requirements of BS EN 16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods The full range of performance functions for the ES 200 automatic sliding door operator (tested to 1,000,000 cycle) TST FLEX with fanlight 40 Corridor mounting with side screens, operator 100 mm 36,5 250 Glass panes Iso 22 double-glazing (4/14/4) Iso 22 double-glazing (6/10/6) Special glazing 111 Clear passage height () Determination of clear passage height (mm) depending on the clear passage width (mm) and the glazing: see diagrams on page 16 39 15 39 30 30 System dimensions and max. door-panel weight Opening to one side* Operator Min. system Max. door-panel width (B) = weight ES 200 without side 1.5 x + 60 mm 2 x 75 kg screens with side 1.5 x + 105 mm 2 x 75 kg screens * not considering the width of the door post Opening to two sides Min. system width (B) = 1.5 x + 80 mm Max. door-panel weight 4 x 75 kg 100 1.5 x + 170 mm 4 x 75 kg 62 288,5 47 50 60 orizontal section with side screen 53,5 110 82 Escape route version: Please consider the prevailing country-specific regulations. 14

DETERMINATION OF DOOR PANEL SIZE The diagrams show the dependence of the clear passage height () on the clear passage width (). The maximum door-panel weight of the relevant operators must not be exceeded. We recommend smaller doors for areas with unfavourable wind conditions. The charts refer to an average door panel weight of 25 kg/m 2. igher clear passage heights () on demand. If using Manet fittings please refer to page 12 for specific opening dimensions. ST ES 200 single-panel version 3000 2700 2540 2500 2000 TST ES 200 double-panel version 3000 2500 2100 2000 1500 1500 1000 1000 0 0 500 700 1000 1500 2000 2500 2660 3000 00 4000 0 0 500 800 1000 1500 2000 2400 2500 3000 00 4000 ST ES 200 double-panel version 3000 TST ES 200 4-panel version 3000 2500 2300 2000 2500 2100 2000 1500 1500 1000 1000 0 0 500 700 1000 1500 2000 2500 3000 00 4000 0 0 500 1000 1400 1500 2000 2500 3000 00 4000 16

PROGRAM SWITCES A program switch from 's broad range of accessories allows the automatic door system to meet individual requirements and provides easy handling. The program switches are available in various designs and suitable for all kinds of applications. They offer various options, from a mechanical to a full-electronic version, alternatively also lockable via profile half-cylinder or in a full-electronic way via code. Up to 5 different functions: Off, Automatic, Exit Only, Partial Open, Permanent Open Electronic program switches in System 55 design meet the highest aesthetical demands For sliding door operators Designation Specification Installation system Order No. PG-S2 5-position, lockable, aluminium, white, flush-mounted version, 80 x 80 x 40 mm Gira S-Color 191602150 EPS-S Full-electronic program switch in System 55 design, 5-position, lockable via code or additional TL-ST S55 key switch, aluminium-coloured membrane keypad, white, flush-mounted version, 80 x 80 mm System 55 16556901150 SWITCES Key switches Specification Installation system Order No. Nightbank external key switch 4010005091 Nightbank internal button (Green) 4010009059 17

ST TST SYSTEM ACCESSORIES ACTIVE INFRARED DETECTOR AND COMBINED SENSOR Safety sensors/combined sensors Designation Specification Colour Order No. Prosecure Opti Combi Combined activation and threshold safety sensor Quick and easy to install, wide field can be used to substitute the light barrier, LCD display, precise positioning of AIR curtain thanks to indication of inclination angle on a well-readable scale, direction recognition (DIN 18650 and EN 16005) black 86711400 SECONDARY CLOSING EDGE (REAR EDGE) EN 16005 COMPLIANCE SOLUTIONS Selected preferred solution The appropriate solution should be based on a risk assessment taking into account the site and traffic conditions please contact if you require assistance. Full eight Pocket Screens Barriers Rear Edge Sensors Safety sensors/combined sensors Designation Specification Colour Order No. Prosecure Opti Scan The active infrared curtain according EN 16005 safeguards the side of the door. It protects people from being hit by the door panel when the door opens. black 86301100 18

UK Limited Wilbury Way itchin ertfordshire SG4 0AB Tel: 01462 477600 Fax: 01462 477601 E-mail: autos@dorma-uk.co.uk Ireland Limited PO Box 1050 Maynooth Co. Kildare 202017 TB 09/14 Subject to change without notice Tel: 01 295 8280 Fax: 01 295 8284 E-mail: info@dorma.ie www.dorma.com