TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently long power cable) Maximum liquid temperature +4 C Suction down above ground level: 85 mm for TR.5-. 95 mm for TR.5-2.2 Minimum immersion depth for continuous service: 3 mm for TR.5-. 35 mm for TR.5-2.2 CONSTRUCTION AND SAFETY STANDARDS m long power cable External float switch and control box for single-phase versions EN 6335- IEC 6335- CEI 6-5 EN 634- IEC 634- CEI 2-3 INSTALLATION AND USE The TRITUS series of grinder pumps manufactured from heavy gauge robust cast iron, resistant to abrasion and long- lasting, are fitted with a GRINDER in tempered stainless steel of great resistance which completely grinds up solid bodies and fibres in waste and refluent water from domestic and civil applications and conveys it under pressure into the sewers through small diameter pipes. PATENTS - TRADE MARKS - S Patent n. EP233658 Patent Pending n. BO25A6 Registered EU Design n. 25486-2 (TR.5, TR.) Registered trade mark n. 38 OPTIONS AVAILABLE ON REQUEST Single-phase pumps without float switch Other voltages or 6 Hz frequency CERTIFICATIONS Company with management system certified DNV ISO 9: QUALITY ISO 4: ENVIRONMENT 358
CHARACTERISTIC CURVES AND PERFORMANCE DATA 5 Hz n= 29 min - 2 3 4 5 6 2 3 4 5 35 US g.p.m. Imp g.p.m. feet 3 TR2.2 25 TR.5 Head H (metres) 4 2 5 TR. TR.5 5 5 25 5 2 4 6 8 2 4 6 8 2 22 24 26 2 3 4 5 6 8 9 2 3 4 5 6 Flow rate Q 4 l/min m³/h POWER (P2) m³/h.6.2 2.4 3.6 4.8 6..2 9.6 2 4.4 5.6 Q Single-phase Three-phase kw HP l/min 2 4 6 8 2 6 2 24 26 TRm.5 TR.5.5 6.5 5.5 5 3.5.8.5 4.5 TRm. TR...5 23 22 2 9.5.5 5.5 3 H metres TRm.5 TR.5.5 2 26 25 24 23 2.5 2.5 9 6.5 3.5 8 TR 2.2 2.2 3 3 3 29 28 26.5 25.5 24.5 22 9.5 6.5 5 Q = Flow rate H = Total manometric head Tolerance of characteristic curves in compliance with EN ISO 996 Grade 3B. 359
TRITUS.5. POS. COMPONENT CONSTRUCTION CHARACTERISTICS PUMP BODY Cast iron with an Epoxy Electro Coating treatment, with threaded port in compliance with ISO 228/ 2 IMPELLER Technopolymer open type 3 GRINDER Tempered AISI 44C stainless steel 4 MOTOR SHAFT Stainless steel AISI 43 5 MOTOR CASING Cast iron with an Epoxy Electro Coating treatment 6 SHAFT WITH DOUBLE MECHANICAL SEAL SEPARATED BY AN OIL CHAMBER Pump Seal Shaft Position Materials Model Model Diameter Stationary ring Rotational ring Elastomer TR.5 TR. MG-4D SIC Ø 4 mm Motor side Silicon carbide Graphite NBR Pump side Silicon carbide Silicon carbide NBR BEARINGS 623 ZZ-C3E / 623 ZZ-C3E 9 8 ELECTRIC MOTOR TRm: single-phase 22-23 V - 5 Hz with thermal overload protector incorporated into the winding TR: three-phase 4 V - 5 Hz 5 Insulation: class F Protection: IP X8 9 POWER CABLE H RN-F type Standard length metres 4 6 2 8 FLOAT SWITCH 3 CONTROL BOX With manual overload cut-out and with capacitors for starting and operating. Standard features Pump Single-phase (23 V or 24 V) TRm.5 TRm. operating capacitor starting capacitor 25 μf 45 VL 8 μf 45 VL Control box 36
DIMENSIONS AND WEIGHT Standard installation (for single-phase version) h DN h c p (minimum) e b a d (minimum) PORT DIMENSIONS mm kg * Single-phase Three-phase DN a b c h h d e p ~ 3~ TRm.5 TR.5 22.3 22.3 ¼ 4 2 45 8 85 variable 5 5 TRm. TR. 23.9 23. (* weight of pump without control box) ABSORPTION Single-phase 23 V 24 V TRm.5 5.5 A 5.3 A Three-phase 23 V 4 V 24 V 45 V TR.5 4. A 2.5 A 3.9 A 2.5 A TRm..4 A. A TR. 5.2 A 3. A 5. A 2.9 A PALLETIZATION GROUPAGE CONTAINER Single-phase Three-phase n. pumps n. pumps TRm.5 TR.5 6 8 TRm. TR. 6 8 36
TRITUS.5 2.2 POS. COMPONENT CONSTRUCTION CHARACTERISTICS PUMP BODY Cast iron with an Epoxy Electro Coating treatment, with threaded port in compliance with ISO 228/ 2 IMPELLER Precision cast stainless steel AISI 34 open type 3 GRINDER Tempered AISI 44C stainless steel 4 MOTOR SHAFT Stainless steel AISI 43 5 MOTOR CASING Cast iron with an Epoxy Electro Coating treatment 6 SHAFT WITH DOUBLE MECHANICAL SEAL SEPARATED BY AN OIL CHAMBER Pump Seal Shaft Position Materials Model Model Diameter Stationary ring Rotational ring Elastomer TR.5 TR 2.2 STA-2 Ø 2 mm Motor side Graphite Graphite NBR STA-9 Ø 9 mm Pump side Silicon carbide Silicon carbide NBR BEARINGS 334 B-ZZ-C3 / 634 ZZ-C3 9 8 ELECTRIC MOTOR TRm: single-phase 22-23 V - 5 Hz with thermal overload protector incorporated into the winding TR: three-phase 4 V - 5 Hz with thermal overload protector incorporated into the winding to be connected to the control box Insulation: class F Protection: IP X8 9 POWER CABLE H RN-F type Standard length metres 4 5 6 2 8 FLOAT SWITCH CONTROL BOX With manual overload cut-out and with capacitors for starting and operating. Pump Single-phase (22-23 V o 24 V) operating capacitor starting capacitor TRm.5 5 μf 45 VL 8 μf 45 VL 3 Standard features Control box 362
DIMENSIONS AND WEIGHT Standard installation (for single-phase version) h h c p (minimum) e b a d (minimum) DIMENSIONS mm kg Single-phase Three-phase a b c h h d e p ~ 3~ TRm.5 TR.5 45.5 42. 8 22 488.5 8.5 95 variable 8 8 TR 2.2 44. FLANGED PORT ABSORPTION PORT K D HOLES Single-phase Three-phase DN mm mm N Ø (mm) Single-phase 23 V TRm.5 TR.5 TR 2.2 ½" 3 4 4 TRm.5. A Three-phase 4 V TR.5 3. A TR 2.2 5.5 A PALLETIZATION GROUPAGE CONTAINER DN K D n. pumps n. pumps TRm.5 TR.5 2 2 TR 2.2 2 2 363