Marine Range www.motul.com
ADVICE Why do Marine engines require specific lubricants? Marine engines are used in very different conditions from that of automotive engines. They are also operating at much cooler temperatures as their cooling systems use water from the surrounding environment such as lakes, rivers or sea water. As a result, while running at full load but at low coolant temperature, these engines create thick deposits on spark plugs, pistons and ports. This is the main reason why dedicated lubricants, specially formulated for Marine applications, are required for your engine to function securely in marine conditions. Specifications such as API (American Petroleum Institute) or NMMA (National Marine Manufacturers Association) guarantee the lubricant performance. Two Cycle Water cooled Four Cycle Water cooled
stroke Lubricants for Outboard Engines 00% Synthetic Outboard Synth T Lubricant developed for high performance -Stroke engines and direct injection -Stroke engines, reinforced with a synthetic and biodegradable base. Particularly recommended for uses under severe conditions and for racing. Standards NMMA TC-W / WII, API TD / TSC Biodegradability CEC L--A-9 Approvals NMMA TC-W RL-999K Mineral Outboard T Lubricant developed for Outboard -Stroke engines lubricated by premix or by oil injector. Suitable for unleaded petrol. Reduces frictions and wear to increase engine life. Standards NMMA TC-W / WII, API TSC Approvals NMMA TC-W RL-566 Outboard Tech T Lubricant developed for Outboard -Stroke engines lubricated by premix or by oil injector, direct injection -Stroke engines. Formulation reinforced by a base stock to improve protection and increase engine life. Exceeds the NMMA* TC-W latest standard level which regroups the main outboard and personal watercraft. Particularly recommended for unleaded petrol. Blue coloured for an easy detection in petrol. * NMMA = National Marine Manufacturing Association - ex BIA Standards NMMA TC-W / WII, API TSC Approvals NMMA TC-W RL-998K
stroke Lubricants for Outboard Engines Outboard Tech T 0W0 Lubricant developed for use in petrol Outboard -Stroke engines, running under severe conditions. Anti-foam properties to avoid foaming and air bubbles introduction into oil circuit. Anti-clogging properties to protect oil filters. Standards API SJ / SG Approvals NMMA FC-W under N FB-656 Lubricants for Inboard Engines Inboard Tech T 0W0 Lubricant reinforced with synthetic base stock providing at the same time outstanding resistance at high temperature, easier flow at cold temperature and longer lubricant life time. Protects against corrosion due to moisture and salt, neutralises acid combustion residues from fuel, and increases engine life. Standards (Diesel) ACEA E7 (E5 / E), API CI- / CH- / CG- / CF- (exceeds API CD CE CF) Standards (Petrol) API SG / SF Specifications CUMMINS 007-007-0076-0077-0078, MAN M 75, Global DHD-, MTU Type II, VOLVO VDS- / VDS-, CATERPILLAR ECF- Lubricants for Inboard Engines Inboard Tech T 5W50 Lubricant developed for Petrol Inboard -Stroke engines. Suitable for Diesel Inboard engines, turbocharged or not. Standards API SH / SG / CD Mineral Inboard T 5W0 Lubricant used in first fill and officially recommended by the YANMAR importer in France. Protects against corrosion due to moisture and salt, neutralises acid combustion residues from fuel, and increases engine life. Standards (Diesel) ACEA E7 (E5 / E), API CI- / CH- / CG- / CF- (exceeds API CD CE CF) Standards (Petrol) API SG / SF Specifications CATERPILLAR ECF-, CUMMINS 007-007-0076-0077-0078, MAN M 75, Global DHD-, MTU Type II, VOLVO VDS- / VDS- ///
Lubricants for JET ENGINES 00% Synthetic 600 DiJet T High performance lubricant without solvent: 00% synthetic Ester base stock reduces frictions for higher power output. Developed for racing, high performance -Stroke leaded or unleaded engines fitted with Direct Injection or carburettors. Standards NMMA TC-W / TC-WII / TC-W Biodegradability CEC L--A-9 / OECD 0B Specific DiJet T For SEADOO -Stroke jet engines lubricated by premix or by oil injector, also suitable for marine engines where manufacturers require API TC lubricant. Developed for leisure or racing, high performance -Stroke leaded or unleaded engines fitted with Direct Injection or carburettors. Standards API TC, JASO FC, ISO-L-EGD Biodegradability CEC L--A-9 Powerjet T reinforced formulation for improved protection and longer engine life. Developed for -Stroke jet engines fitted with Direct Injection or carburettors, lubricated by premix or by oil injector. Developed for leaded or unleaded petrol. Standards NMMA TC-W, API TC WII / TC-W Powerjet T 0W0 Specially developed for personal watercraft -Stroke engines, turbocharged or supercharged. Leisure or racing use. Suitable for catalytic converters and for leaded or unleaded petrol. Protects against salt fog corrosion. Standards API SJ 5
Transmission Translube Power 75W90 00% synthetic Ester gear oil to lubricate the lower unit of high power Outboard engines. High protection, against wear and box working noise. Extreme Pressure, anti-foam, anti-corrosion. Standards API GL-5 Translube Mineral gear oil to lubricate low unit of Outboard engines. Reduces friction, wear and box working noise. Extreme Pressure, anti-foam, anti-corrosion. Dexron III For all systems where DEXRON or MERCON standard is required. Approvals MAN 9 Typ Z- / 9 Typ V- (9F), MB-Approval 6.5 / 6.9, VOITH 55.65. (G607), ZF TE-ML 0D / 0D / A / 7C Performances GENERAL MOTORS DEXRON III G, FORD MERCON, ALLISON C, CATERPILLAR TO- 6
Coolants maintenance Carbu Clean Carburettor cleaner: eliminates deposits and varnish on throttle valves, bushels, jets, tanks, floats, venturis. Stabilizes the idle and improves engine acceleration. 00ml Engine Clean Add to the oil before drain. Cleans and protects the engine. Decreases oil and fuel consumption. Improves compression. 00ml Fuel System Clean Inugel Optimal Ready to use. Organic Acid Technology (OAT). Long-life technology. Freezing protection down to -7 C / -5 F. Exists in concentrated formula, Inugel Optimal Ultra. Performances BS 6580, MAN Typ SNF, VOLVO PENTA 8 606 / 00 Inugel Expert Ready to use. Hybrid technology. Anti-corrosion. This product can be mixed with almost all monoethyleneglycol based coolants. Freezing protection down to -7 C / -5 F. Exists in concentrated formula, Inugel Expert Ultra. Performances BS 6580, AFNOR NFR 5-60, JASO M5, SAE J0, MAN Typ NF Add to the fuel for higher engine performances. Strengthened action on valves, carburettors, injectors and combustion chambers. 00ml Diesel System Clean Cleaner specially formulated for fuel systems of Diesel engines. Reinforced action on valves, pumps, injectors and combustion chambers. 00ml Valve Expert 5 Lead substitute additive for engines requiring leaded petrol. 50ml Stabilizer 6 Gasoline conservation additive protecting petrol from oxidation (winter storage, occasional use). 50ml ////////////////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////////////////////////////////////// 6 5 7
Maintenance 8 Brake Clean Very powerful non-chlorinated degreaser for metal parts. Effectively removes oil, grease, tar and dust. 00ml E.Z. Lube Multipurpose fluid lubricant: unblocks, lubricates and protects from corrosion all metal parts by leaving a protective film. 00ml Shine&Go Shines and revives the colours of plastic surfaces: fairings, paints, fenders and mirrors. Leaves a long-lasting non-sticky protective film. 00ml Tech Grease 00 Very high performance multipurpose grease. formulation based on complex lithium soap, with Extreme Pressure, anti-wear, anti-oxidation and anti-corrosion additives. Excellent performances at high temperature. Long life duration, water resistant. Consistency NLGI. 00g Nautic Grease NLGI high performance Extreme Pressure grease based on calcium soap. Lubricates and protects against wear and corrosion even in salt water. Highly adhesive, insoluble in water. Application: from -0 C to 0 C. /////// 9 Bd Félix Faure - 900 Aubervilliers France Tel. + (0) 8 70 00 n Fax. + (0) 8 8 79 Contact : info@motul.com n www.motul.com March 0-0855 - +com - agencepluscom.com