Hubbell Workplace Solutions

Workplace Solutions Hubbell Workplace Solutions - Material Handling & Electrical Products -

Festoon Trolleys Adjustable S-Beam Trolleys Our S-Beam Trolleys are designed with your applications in mind. Economical, durable and expandable, our festoon cable trolley runs on various size S-beams (S3 x 5.7, S4 x 7.7, S6 x 12.5 - consult factory for other beam sizes). These trolleys roll on 4 steel ball bearing wheels that have a static load capacity of 1000 lbs. each. This provides a rolling capacity of 154 lbs at 262 ft per minute. Multiple cable saddle configurations provide a variety of cable carrying options for single or dual flat cable or round cable. F-IT-S3/5.7R2-0.60-0.94 dia F-IT-S3/5.7R3-0.94-1.25 dia Intermediate or Tow Trolley with steel saddle for round cable/hose F-IT-S3/5.7 Intermediate or Tow Trolley with flat cable saddle F-IT-S3/5.7D Intermediate or Tow Trolley with dual flat cable saddles F-ICE/R2-0.60-0.94 dia Round F-ICE/R3-0.94-1.25 dia Round F-ICE - single saddle 3 dia Flat F-ICE-D - dual saddle 3 dia Flat End Clamps with choice of trolley F-ITB-S3/5.7 Control Box Trolley for the push button pendant connection Mfr s Model # Fastenal SKU# F-IES End Stop for S-Beam 0542328 F-ICE End Clamp for Flat - Single Saddle for S-Beam 0542329 F-ICE-D End Clamp for Flat - Dual Saddle For S-Beam 0542330 F-ICE/R2 End Clamp for Round - 0.60" - 0.94" dia.for S-Beam 0542331 F-ICE/R3 End Clamp for Round - 0.94" - 1.25" dia.for S-Beam 0542332 F-CTA-F12 Tow Arm 12" For S-Beam Trolleys 0542333 F-CTA-F15 Tow Arm 15" For S-Beam Trolleys 0542334 F-CTA-F18 Tow Arm 18" For S-Beam Trolleys 0542335 F-IT-S3/5.7R2 Intermediate or Tow Trolley for round cable 0.60-0.94 dia. 0542323 F-IT-S3/5.7R3 Intermediate or Tow Trolley for round cable 0.94-1.25 dia. 0542324 F-IT-3/5.7D Intermediate or Tow Trolley for Flat cable Dual Saddle 0542325 F-IT-S3/5.7 Intermediate or Tow Trolley for Flat cable 0542326 F-ITB-S3/5.7 Control Box Trolley For Pushbutton Pendant Connection for S-Beam 0542327

Festoon Systems T-Track Festoon Systems T-Track Heavy Duty Festoon Systems are specially designed for applications where a more robust system is required to support heavier loads at wider support spacings. Made of a high strength aluminum extrusion, these systems are rugged enough to handle the most demanding applications. The track is supplied in convenient lengths which simply bolt together with a heavy duty joint assembly, and it can be curved to a minimum of 48 (1.2M) at various angles if required. The trolleys roll along the outside of the track, which allows for easy inspection and changing of the rollers. These trolleys utilize the same rugged, field proven rollers that are used on the C-Track trolleys, and they are supplied with anti-lift rollers as a standard feature. All standard trolleys feature durable steel wheels. Mfr s Model # Fastenal SKU# R-HC5A T-Track Standard Trolley Assembly for Round cable 0.60" - 0.94" dia. 0542349 R-HC5AL T-Track Standard Trolley Assembly for Round cable 0.95" - 1.25" dia. 0542350 F-HCT T-Track Tow Trolley Assembly for Flat cable 3" dia. 0542354 R-HCTA T-Track Tow Trolley Assembly for Round cable 0.60-0.94" dia. 0542355 R-HCTAL T-Track Tow Trolley Assembly for Round cable 0.95" - 1.25" dia. 0542356 F-HTJ1 T-Track Joint Kit 0542338 F-HTH T-Track Hanger Asm Angle Support Brkt. 0542342 F-HTEH/CT T-Track Hanger Asm. Crossarm 0542343 F-HTH/ST Strut Track Support Bracket 0542344 Mfr s Model # Fastenal SKU# F-HTS T-Track End Stop Assembly 0542357 F-HT10 T-Track H.D. Aluminum 10 ft. 0542336 F-HT20 T-Track H.D. Aluminum 20 ft. 0542337 F-HTE End Clamp for T-Track Flat cable 3" dia. Assembly 0542345 R-HTE End Clamp for T-Track Round cable 0.60" - 0.94" dia. Assembly 0542346 R-HTEL End Clamp for T-Track Round cable 0.95" - 1.25" dia. Assembly 0542347 F-HTA T-Track Tow Arm for Flat Assembly 3" dia. 0542351 R-HTA T-Track Tow Arm for Round Assembly 0.60" - 0.94" dia. 0542352 R-HTAL T-Track Tow Arm for Round Assembly 0.95" - 1.25" dia. 0542353 Conductor Bar Systems Insulated Conductor Bar Kits - 8 Bar UNIVERSAL 8-BAR Conductor Bar Systems are designed to carry up to the specified current without overheating. Internal joint connections assure full current carrying capacity without interfering with the free travel of the sliding collector contact shoes. TYPICAL APPLICATIONS: Overhead Cranes Monorails Traveling Robots Overhead Sliding Doors AS/RS Systems Qty Mfr s Fastenal Conductor Bar Kit - 3 Phase, 50 feet 1 Kit* CB5038110-1 0542320 Conductor Bar Kit - 3 Phase, 100 feet 1 Kit* CB10038110-1 0542321 Conductor Bar Kit - 3 Phase, 150 feet 1 Kit* CB15038110-1 0542322 *All kits include required number of: Galvanized Steel Conductor 110 Amps x 10' Joint Cover, Orange Power Feed - 110 ampere 110A Standard 8-Bar Collector Assembly Mtg Bracket x 15" Web w/ Hanger Snap-in Anchor Hanger Connector Tool

Tool Balancers Fastenal : 7060406 Hanging Tool Management Tool Balancers provide a simple means to reduce manufacturing and assembly costs by keeping tools in an easily accessible place at workstations and protecting expensive tools from damage. A Tool Balancer can help reduce worker fatigue and repetitive motion injuries by reducing the apparent weight that a worker must handle in repetitive assembly operations. A properly set-up Tool Balancer will make a heavy tool seem nearly weightless and will enable an operator to pull a tool down from an overhead mount, perform assigned tasks quickly and efficiently and return the tool to it's overhead storage position with little or no effort. Tool Balancers shown on this bulletin can accommodate tools weighing from 0.5 to 187 lbs. 7060398-7060405 7060395-7060397 7060387-7060394 7060384-7060386 Cord / Reels Heavy Duty Electric Reels Series 'G' General Purpose Reel Series 'A' Reel UL and CSA listed Fully automatic, hand-pull, optional 340 pivot base All-welded solid steel construction, slip rings in NEMA 4 enclosure Safety Change spring motor, weatherproof gasket on spring motor Positive ratchet lock with disengage, cable included Multi-position cable guide (field adjustable) cable stop included Cast aluminum construction Fully automatic, hand-pull, optional 340 pivot base Unitized 20 amp slip ring in gasketed enclosure Maintenance free enclosed power spring Type SOW cable and field adjustable cord stop included on all reels Positive locking dog with field adjustable disengage feature 0708437-0708439 0706967 & 0706971 Optional 340 Pivot Base Available for, Cord and Hose Reel Models 0706972-0706973 0726308-0726319 0746000-0746011 0745988-0745999 Hubbell Cord Reels - Auto-Spring Rewind These reels are ideal for a wide variety of industrial applications and can be mounted on the wall, ceiling or under a work bench. Reels are available with your choice of end effectors: single or dual receptacles, and incandescent or fluorescent handlamps with cord lengths from 25 feet to 70 feet. All reels include an adjustable cord stop, automatic spring rewind, a multi-position cord guide with four rollers and four foot long supply cord with a grounded plug. Reels are supplied with a ratchet locking device which will maintain a desired length of cord. Operator pulls from reel to engage lock, after task is completed a slight pull of the cord will disengage lock allowing cord to be retracted into the reel. Maximum installation height is 16 feet. 7060622-7060634 7060613-7060617 7060609-7060612 7060618-7060621

Festoons Wire Rope Festoon Wire rope festoon systems are designed for limited travel distance and speed applications and are ideal for use on jib cranes. These systems feature easily installed fiberglass reinforced nylon trolleys with zinc plated steel cable or hose saddles. Each kit includes 2 tension brackets, 1 tow arm, 1 tow trolley, 1 end clamp and intermediate trolleys per kit chosen. In addition, kits include sufficient 1/4" wire rope for system length and all hardware required for hanging and tensioning. Provision must be made to support system at each end. Recommended loop depth is 36". Systems do not include electrical cable or connectors. TOW ARM Fastenal : 7060445 TENSION BRACKET Fastenal : 7060444 WIRE ROPE Runs parallel to crane rail TOW CLAMP Fastens cable to tow arm CRANE RAIL 7060415-7060422 FLAT CABLE FLAT ELECTRICAL COMPONENTS ROUND CABLE OR HOSE COMPONENTS Intermediate Trolley Tow Clamp End Clamp Intermediate Trolley Tow Clamp End Clamp END CLAMP ROUND CABLE OR HOSE 7060435 7060441 7060438 7060436-7060437 7060442-7060443 7060439-7060440 0.60" - 0.94" O.D. Round: 7060423-7060428 0.95" - 1.25" O.D. Round: 7060429-7060434 Jib Kits Overhead Tool Management Used in conjunction with Tool Balancers, these Jib Booms provide a simple means to maximize production and reduce manufacturing and assembly costs by keeping tools in an easily accessible place at workstations and protecting expensive tools from damage. Jib kits provide up to 360 of workspace without taking up valuable floor space. Jib Boom Features: 300 lb Capacity 7060407 and 7060408 360 360 Heavy steel construction with durable baked-on powder-coated polyester finish Festoon trolleys accept 0.60-0.94 inch O.D. air hose or electrical cable 150 lb Capacity Fastenal : 7060409 All assembly hardware is included except for anchors, nuts and washers necessary for mounting to floor 180 Static Discharge Products Series 'SD' Enclosed Spool Automatic PULL Rewinding Rugged Steel Construction Compact Enclosed Design Positive Ratchet Lock Lock On/Lock Off Switch Steel Installed 100 Amp Universal Jaw-Type Grounding Clamp Safety Orange Polyester Baked-On Finish 0745855-0745859 50 lb Capacity 7060410-7060413 Series 'OSD' Open Spool Spring Rewind with Centrifugal Brake Open Spool Design Lengths up to 100 ft Choice of Grounding Clamps and Plugs Rugged Steel Construction Safety Orange Polyester Baked-On Finish Ideal for a wide variety of grounding applications is 7 x 7 stranded stainless steel with yellow polyester elastomer cover, 5/32" o.d. 0745843-0745854

Static Discharge Products Grounding and Bonding s Antistatic s prevent sparks from static electricity generated by movement and flow of flammable liquids. Bonding between containers during liquid transfer and connecting drums to an earth ground are required by Federal and local codes. Various clamps and terminals allow a wide variety of uses. All cables are 7 x 19 stranded steel. Insulated cables have Safety Orange jacket. Available in several lengths, insulated or non-insulated Five types of end connectors available on all cables lengths and types Hand Clamp & Alligator Clip For longer reach or Y, connect several cables with 1/4" terminal ends Stranded cable for maximum flexibility and conductivity Alligator Clip & C-Clamp 0745878 GCSP-AH-03 3' Flexible Steel 0745879 GCSP-AH-05 5' Flexible Steel 0745880 GCSP-AH-10 10' Flexible Steel 0745881 GCSI-AH-03 3' Insulated Steel 0745882 GCSI-AH-05 5' Insulated Steel 0745883 GCSI-AH-10 10' Insulated Steel Two Hand Clamps 0745860 GCSP-AC-03 3' Flexible Steel 0745861 GCSP-AC-05 5' Flexible Steel 0745862 GCSP-AC-10 10' Flexible Steel 0745863 GCSI-AC-03 3' Insulated Steel 0745864 GCSI-AC-05 5' Insulated Steel 0745865 GCSI-AC-10 10' Insulated Steel 0745866 GCSP-HH-03 3' Flexible Steel 0745867 GCSP-HH-05 5' Flexible Steel 0745868 GCSP-HH-10 10' Flexible Steel 0745869 GCSI-HH-03 3' Insulated Steel 0745870 GCSI-HH-05 5' Insulated Steel 0745871 GCSI-HH-10 10' Insulated Steel Hand Clamp & 1/4" Terminal 0745872 GCSP-HE-03 3' Flexible Steel 0745873 GCSP-HE-05 5' Flexible Steel 0745874 GCSP-HE-10 10' Flexible Steel 0745875 GCSI-HE-03 3' Insulated Steel 0745876 GCSI-HE-05 5' Insulated Steel 0745877 GCSI-HE-10 10' Insulated Steel Hand Clamp & C-Clamp Two Alligator Clips Two 1/4" Terminals 0745884 GCSP-HC-03 3' Flexible Steel 0745885 GCSP-HC-05 5' Flexible Steel 0745886 GCSP-HC-10 10' Flexible Steel 0745887 GCSI-HC-03 3' Insulated Steel 0745888 GCSI-HC-05 5' Insulated Steel 0745889 GCSI-HC-10 10' Insulated Steel 0745890 GCSP-AA-03 3' Flexible Steel 0745891 GCSP-AA-05 5' Flexible Steel 0745892 GCSP-AA-10 10' Flexible Steel 0745893 GCSI-AA-03 3' Insulated Steel 0745894 GCSI-AA-05 5' Insulated Steel 0745895 GCSI-AA-10 10' Insulated Steel 0745896 GCSP-EE-03 3' Flexible Steel 0745897 GCSP-EE-05 5' Flexible Steel 0745898 GCSP-EE-10 10' Flexible Steel 0745899 GCSI-EE-03 3' Insulated Steel 0745900 GCSI-EE-05 5' Insulated Steel 0745901 GCSI-EE-10 10' Insulated Steel Individual Connectors C-Clamp only 100 Amp Alligator Clip only Hand Clamp only Aircraft Clamp only Round Grounding Plug only Model. No. GC-CEE Model. No. GC-ALG Model. No. GC-PLR Model. No. AGC-MOD Model. No. AGP-01 0745902 0745903 0745904 0745905 0745906

/ Hose Carriers Standard, Flip-Top and Enclosed Carriers HUBBELL CABLE/HOSE CARRIERS guide and protect power and control cables and hoses connected to moving machinery. One end of the carrier is fastened to a stationary base and the other end is fastened to the moving machine. Three types are available: Open with fixed top, open with snap-open top to ease cable/hose installation and enclosed with fixed top to provide protection from chips, dirt, etc. Basic Kits (C) include enough trak to form the curve and provide for three ft. of machine travel (standard mounting) or six ft. of machine travel (center mounting). Mounting hardware is included. Extenders (D) include one foot of trak only; hardware is not included. Extenders are inserted into the Basic Kit to provide additional travel and required overall length. Links snap securely together. Individual links can be easily removed with a screwdriver to provide custom length. END MOUNTING CONFIGURATION: Trak travel length = Machine travel length. Trak Travel of BASIC KIT (C) = 3 ft ADD EXTENDER KIT(S) TO LENGTHEN ASSEMBLY selection 1. WINDOW: see columns A & B below. Select trak that accomodates height and width of cable or hose bundle. 2. TrAVEL: Measure machine travel. Determine if fixed point of trak is to be at end (standard mount) or in center of machine travel. See drawings at left. 3. ORDER TrAK: a. basic kit (c) Provides 3 Ft travel (standard mount), up to 6 Ft for centermount. B. EXTENDER KITS (D) Provides 1 Ft travel. Order as many as needed for travel. Formula: Trak travel in Ft minus 3 Ft (rounded to next highest number) equals number of extender kits require. NOTE: Individual links may be removed to obtain exact length required. R Trak Travel with EXTENDERS (D) inserted = Qty Extenders x 1 Ft + 3 ft FIXED POINT WINDOW OPENING CENTER MOUNTING CONFIGURATION (recommended): Trak travel length = 1/2 machine travel length. Center Mount Travel= (Qty Extenders x 1 Ft + 3 ft) x 2 Qty Extenders x 1 Ft + 3 ft Qty Extenders x 1 Ft + 3 ft A NOTE: Each 1 ft. of listed travel becomes 2 ft. when center mounted. STANDARD TRAK Economical - Ideal for shorter travel 0745907-0745915 Flip-Top TRAK Top opens for quick, easy cable/hose installation 0745916-0745930 ENCLOSED TRAK Protection from hot chips, sparks and other debris 0745931-0745937 B A Maximum O.D. Largest / Hose FIXED POINT B Maximum Width of /Hose Bundle R Minimum Bend Radius C BASIC KIT 3 Ft. Travel (includes brackets) D EXTENDER KIT 1 Ft. Travel (w/o brackets) Gleason No. Gleason No. 0.286 0.531 1.43 P10-1-1.4-3.0 0745907 EP10-1-1.4-1.0 0745938 0.286 0.900 1.43 P10-2-1.4-3.0 0745908 EP10-2-1.4-1.0 0745939 0.382 0.900 1.91 P10-2-1.9-3.0 0745909 EP10-2-1.9-1.0 0745940 0.410 1.350 2.05 P13-1-2.0-3.0 0745910 EP13-1-2.0-1.0 0745941 0.740 1.350 3.70 P13-1-3.7-3.0 0745911 EP13-1-3.7-1.0 0745942 0.410 2.052 2.05 P13-2-2.0-3.0 0745912 EP13-2-2.0-1.0 0745943 0.740 2.052 3.70 P13-2-3.7-3.0 0745913 EP13-2-3.7-1.0 0745944 0.410 2.772 2.05 P13-3-2.0-3.0 0745914 EP13-3-2.0-1.0 0754945 0.740 2.772 3.70 P13-3-3.7-3.0 0745915 EP13-3-3.7-1.0 0754946 0.382 1.350 1.91 P16-1-1.9-3.0 0745916 EP16-1-1.9-1.0 0745947 0.688 1.350 3.44 P16-1-3.4-3.0 0745917 EP16-1-3.4-1.0 0745948 0.382 2.052 1.91 P16-2-1.9-3.0 0745918 EP16-2-1.9-1.0 0745949 0.688 2.052 3.44 P16-2-3.4-3.0 0745919 EP16-2-3.4-1.0 0745950 0.382 2.772 1.91 P16-3-1.9-3.0 0745920 EP16-3-1.9-1.0 0745951 0.688 2.772 3.44 P16-3-3.4-3.0 0745921 EP16-3-3.4-1.0 0745952 0.382 3.654 1.91 P16-4-1.9-3.0 0745922 EP16-4-1.9-1.0 0745953 0.688 3.654 3.44 P16-4-3.4-3.0 0745923 EP16-4-3.4-1.0 0745954 0.680 2.340 3.44 P25-1-3.4-3.0 0745924 EP25-1-3.4-1.0 0745955 0.680 3.825 3.44 P25-2-3.4-3.0 0745925 EP25-2-3.4-1.0 0745956 0.956 3.825 4.78 P25-2-4.7-3.0 0745926 EP25-2-4.7-1.0 0745957 1.546 3.825 7.73 P25-2-7.7-3.0 0745927 EP25-2-7.7-1.0 0745958 1.575 3.825 11.67 P25-2-11.6-3.0 0745928 EP25-2-11.6-1.0 0745959 0.956 5.940 4.78 P25-3-4.7-3.0 0745929 EP25-3-4.7-1.0 0745960 1.546 5.940 7.73 P25-3-7.7-3.0 0745930 EP25-3-7.7-1.0 0745961 0.468 1.350 2.34 T0815-2.3-3.0 0745931 ET0815-2.3-1.0 0745962 0.650 1.800 3.25 T1020-3.2-3.0 0745932 ET1020-3.2-1.0 0745963 0.900 1.800 5.88 T1020-5.8-3.0 0745933 ET1020-5.8-1.0 0745964 0.824 2.700 4.12 T15.30-4.1-3.0 0745934 ET15.30-4.1-1.0 0745965 1.350 2.700 7.73 T1530-7.7-3.0 0745935 ET1530-7.7-1.0 0745966 1.176 4.050 5.88 T2045-5.8-3.0 0745936 ET2045-5.8-1.0 0745967 1.676 4.050 8.38 T2045-8.3-3.0 0745937 ET2045-8.3-1.0 0745968

Hose Reels Heavy Duty Electric Reels Series 'GH' General Purpose Hose Reel Mount from ceiling, wall or under bench. Full flow shafts and swivels assure maximum product delivery. Reels feature spring rewind and ratchet lock, multi-position four roller hose guide and adjustable hose stop. Rugged steel construction. Steel components protected by durable baked polyester finish. *Optional pivot base, Fastenal : 0144164 Series 'PH' Hose Reel For mobile outdoor environment, or mount from ceiling, wall or under bench. Choose 1/4", 3/8", 1/2", 3/4" or 1 hose. Full flow shafts and swivels assure maximum product delivery. Reels feature spring rewind and ratchet lock, multi-position four roller hose guide and adjustable hose stop. Rugged steel construction. Steel components protected by durable baked polyester finish. Hand pull application only. Series 'HH' Hose Reel Features: air, water, oil or grease duty; rugged steel construction; high quality swivel joints designed with seals for each specific fluid application; manual pull off, handcrank rewind; spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off and heavy duty mounting brackets. Hose must be ordered separately. 0441965-0441974 0441975-0441977 0441960-0441963 Qualtech Workstands Organize Your Work Site Information, documentation and inspection stands designed for the workplace. Keep important files clean, organized and accessible. Stands feature yellow, high impact polystyrene display and writing surfaces. Deluxe versions feature locking casters and lockable trays. Fastenal : 0530330 0530324-0530325 0530326-0530327 Fastenal : 0530329 Fastenal : 0530328 GLEASON A HUBBELL COMPANY Gleason Reel Corp. P.O. Box 26 600 South Clark St. Mayville, WI 53050 Phone: 920-387-4120 Fax: 920-387-4189 www.hubbell-gleason.com Protect Your and Hoses Rugged steel side chains made of high strength, low alloy steel Wide variety of link heights, radii and widths Steel or aluminum Carriers Ideal for high speed or harsh environments Gleason has excellent capabilites to replace your old worn out tracks, any make, model or size Applications: machine tools, flame cutters, transfer cars, laser cutters, cut-off saws, over head cranes and more 11