-8--776 www.midwestair.com Bulletin EXFANS 7 Capacities to 7, CFM Corrosion Resistant Construction EXHAUST FANS wet scrubbers chrome (CMP) scrubbers mist eliminators (CMP) exhaust fans exhaust hoods canopy hoods ductwork installation maintenance programs custom fabrications design services PO Box 9 8 Hughes Drive Traverse City, MI 9686 Ph:-9-86 Fax: -9-66
Since 979, Midwest Air Products Co., Inc. has been producing quality corrosion resistant fans to move air in America's Metal Finishing Industries. We have practiced a policy of continuous product development and offer an unmatched combination of technology and manufacturing skill. Our fan designs provide the highest aerodynamic efficiencies, compatible with specific requirements. Mapco fan structures are designed for long service life in the most severe environments. All fans are equipped with a rugged steel fan wheel which has been sand blasted and coated with Mapco-Guard corrosion resistant coating. Inlet cones are heat formed (not vacuum formed) to provide the smoothest air flow into the fan wheel insuring minimum inlet turbulence. The end result of this manufacturing process is the most efficient fan money can buy. Mapco fans are fabricated from heavy gauge high impact Type II Grade I PVC, conforming to ASTM D78-78 and containing no plasticizers or polypropylene, conforming to ASTM P6-78. PP, SS & FRP construction is also available. ACCESSORIES Spring Isolators Rubber and Shear Isolators VFD (variable frequency drive) Silencers Back Draft Dampers Automatic Dampers CONSTRUCTION FEATURES Heavy-gauge welded PVC, Poly Pro, FRP or Stainless Steel construction with steel base. Continuous welded housings provide the strongest possible construction. Lifting eyes are standard on all fans. Fan wheels are statically and dynamically balanced at the specified running speed after final assembly. Heavy duty bearings are selected for long service life through the entire operating range of the fan. Corrosion resistant steel fan wheels Class II construction. DESIGN FEATURES Complete Class I, II, III performance. Capacities to 7, CFM. Pressures to " WG Efficiencies beyond 8% Temperatures to: F. FRP Fan F. PVC Fans 8 F. Poly Pro sizes: " through 6" wheel diameters. Available in clockwise and counterclockwise rotations in any six standard discharge positions. Unique heat formed inlet cone with airflow diverter improves fan efficiency.
. FLANGES Outlet flange is welded flush with fan outlet and provided without holes. Optional inlet flange welded to inlet collar or flexible connection provided without holes. Optional Companion flange can be provided with matching hole pattern.. DRAIN All fans are equipped with a threaded drain coupling except bottom horizontal discharges.. SHAFT SEAL Rubber shaft seal and moisture diverter is supplied on housing interior to prevent leakage through the fan housing.. UNITARY BASE Structural steel base provides common support for fan, motor, and drive components...also available with springtype or rubber-in-shear isolators (flexible duct connections are recommended for use with isolation bases). The wheel's single-thickness blades handle airstreams not suited to hollow airfoil shapes. EFFICIENCY Area of peak mechanical efficiency is on the steeply rising portion of the static pressure curve, the best selection range. SOUND Sound levels are lowest with the most efficient fan selections. CONSTRUCTION Sizes to 6 are all-welded steel with Mapco-Guard corrosion resistant coating. TYPICAL PERFORMANCE Shaded regions across curves and capacity tables highlight performance within % of peak mechanical efficiency.. CLEANOUT DOOR Bolt on cleanout doors are provided as standard equipment. Optional sliding door also available. 6. SAFETY EQUIPMENT Shaft/bearing guard and belt guard are standard equipment on all fans. Motor covers also available. Fans can also be ordered less motor, drive and guard. 7. INLET BOXES PVC inlet box minimizes entry losses normally associated with 9 turns at or near fan inlet. 8. OUTLET DAMPERS Parallel-blade or opposed-blade outlet dampers are available for volume-control applications. Outlet dampers are supplied in coated steel only. LOUDNESS PERCENT BHP and ME 8 6 6 8 PERCENT CFM
Class I, II and III Single-Width Fans are available in Arrangements and 9 for beltdrive applications. The use of standard V- belt drives provides flexibility in fan performance by changing sheaves and belts. In lower horsepower ranges, V-belt drive selection is relatively simple, but as horsepower requirements increase, V-belt drive selection becomes more complicated and requires more consideration of the drive's effect on fan and motor bearings. ARRANGEMENT Overhung wheel keeps bearing out of airstream A few recommendations to remember are:. 6 motors are not generally recommended for belt drive above HP.. 8 motors are not generally recommended for belt drive above HP.. When motors HP and larger are to be used with belt-drive fans, Mapco requires that the motor manufacturer: a Recommend the minimum diameter motor sheave that may be used. ARRANGEMENT Essentially the same as arrangement, but with motor mounted on side of fan pedestal. Motor size capability shown on page 9. b Recommend the maximum motorsheave width that may be used. With the above information from the motor manufacturer, the drive may be selected. FAN DISCHARGES Clockwise and counterclockwise angular discharges @. TAD discharge configuration requires extension on fan outlet. Consult factory for dimensions. Midwest Air Products Co., Inc. has a policy of continuous product development and reserves the right to change designs and specifications without notice.
O W W T T U U INLET Q S R D OD F G H N M OD 6 B L OD C A Inlet/Outlet Flange Size - Size to... /" X /" Size 7 to 6..." X /" CLASS I,II,ARRANGEMENT AND 9 DIMENSIONS [INCHES] Size A B C D OD F G H K L OD M OD N / /8 / /8 /6 / 9 /8 9/6 7 / /8 6 7/8 7/8 / 7 /6 7/8 /8 6 8 / 6 8 / / 9 /8 / 9/6 / 9 / /8 7 /6 / 8 / 7/8 /8 8 7/8 8 / 7/8 7 / / 8 / 7 /8 6 / / / 6 /8 8 / / 7 / 7 / /8 8 /8 7/8 /8 9 /8 / /8 9/6 /6 /8 9 7/8 / /8 7/8 / 7 /8 7 8 6 7/8 6 /8 /8 8 / 6 9 6 7/8 7/8 8 / 7/8 69 /8 6 / 9 /8 7 / 8 7/8 Size O Q R S T U W BASE HOLE SHAFT SIZE DLAH BEARING CENTERLINE SCROLL MAT'L. THICKNESS SIDE MAT'L. THICKNESS 6 /8 /8 / 7/8 7 /8 6 / 8 9/6 /6 /6 /8 /6 /6 / / /8 8 7/8 8 9 / 9/6 7/8 /8 /6 8 9/6 8 /8 9 /8 8 / / 9/6 /6 /8 /8 /6 88 /6 / 7 /8 7/8 9 / / 9/6 /6 /8 /6 / 6 9/6 7/8 9 /8 / / /6 /8 /6 / 68 7 8 /6 / 9 7/8 /8 / / / /6 / /6 / 66 /6 8 /8 /8 / / / /6 / /6 / 76 7 / /8 6 7 / /6 / /6 / 968 6 6 /8 /8 6 7 / /6 / /6 / WEIGHT LESS MOTOR
O W T U W T U INLET Q S R D OD F G H N M OD 6 B L OD C A Inlet/Outlet Flange Size - Size to... /" X /" Size 7 to 6..." X /" CLASS I,II ARRANGEMENT AND 9 DIMENSIONS [INCHES] Size A B C D OD F G H K L OD M OD N / / /8 7 7/8 7 /8 /8 / 7 9 7/8 7 /8 7 / 8 7 / 8 /8 / / 9 / 6 9 / 7/8 ½ 86 7/8 8 /8 7 /8 / 7 7/8 6 /8 7 / 7/8 97 / 8 / 8 7/8 / 6 6 / 6 / 67 6 / 7/8 7/8 9 6 /8 /8 / Size O Q R S T U W BASE HOLE SHAFT SIZE BEARING CENTERLINE SCROLL MAT'L. THICKNESS SIDE MAT'L. THICKNESS 69 / / / / 9 7 / / 7/8 / /6 / 7 7/8 / 6 / / 9 / / 7/8 /6 / / 66 9 79 / 9/6 / / / 7/8 /6 / / / 6 9 /8 /8 / / 7 / / 6 9 / /6 9 / 6 / / 8 / / / 78 WEIGHT LESS MOTOR Dimensions shown for PVC fans only. Dimensions not to be used for construction unless certified. Tolerance + or - /8"
W T U W T U Q S O R H D OD N M OD 6 Q G B K L OD C A Inlet/Outlet Flange Size - Size to... /"X /" Size 7 to 6..."X /" CLASS I,II,III ARRANGEMENT AND 9 DIMENSIONS [INCHES] Size A B C D OD F G H K L OD M OD N / /8 / /8 / / 9 /8 7 / /8 6 7/8 7/8 / / 7/8 /8 8 / 6 8 / / 9 /8 / 8 / / 9 / /8 / 8 / 7/8 /8 8 7/8 6 /8 7/8 7 / 6 8 / 7 /8 6 / 8 /8 / 6 /8 8 / 6 7 / 7 / /8 8 /8 7/8 6 /8 9 /8 6 7/8 / /8 9/6 /6 /8 6 /8 / /8 7/8 6 7/8 9 / /8 7 8 7 /8 6 /8 /8 9 7/8 6 9 / 9 6 7/8 7/8 8 / 7/8 7 7/8 6 9 /8 7 / Size O Q R S T U W BASE HOLE SHAFT SIZE BEARING CENTERLINE SCROLL MAT'L. THICKNESS SIDE MAT'L. THICKNESS / /6 / 6 /8 7 /8 6 / 8 9/6 /8 /8 /6 7 /8 /6 / 8 /8 8 7/8 8 9 / 9/6 /8 /8 /6 8 8 /8 /6 8 8 /8 9 /8 8 / / 9/6 /6 / /8 /6 7 /8 7/8 / /8 /8 / / 9/6 /6 / /6 / 7 / 7/8 /8 /8 /8 / / /6 / /6 / 6 7 / /6 / / /8 / / / /6 / /6 / 7 / /6 8 / /8 / / / /6 / /6 / 8 8 /6 / / 6 /8 / 7 / /6 / /6 / 98 6 6 / /6 7/8 7/8 6 /8 / 7 / /6 / /6 / WEIGHT LESS MOTOR Dimensions shown for PVC fans only. Dimensions not to be used for construction unless certified. Tolerance + or - /8" 6
SHAFT GUARD MOTOR BUSHING BELT GUARD BEARINGS STEEL PEDESTAL ACCESS DOOR FAN SHEAVE GUARD BACK PLATE MOTOR MOTOR BUSHING MOTOR SHEAVE FAN WHEEL FAN HOUSING ADJUSTABLE MOTOR BASE INLET CONE INLET HANGER INLET/OUTLET FLANGE DIMENSIONS [INCHES] C (TYP) L FLANGED INLET OPTION Holes furnished on vertical centerline Size - FLANGED OUTLET. Mounted flush with outside edge of housing discharge. D A. Holes furnished on " centers from centerlines. NOTE: Inlet flange: Sizes -... /" x /" Sizes 7-6..." x /" NOTE: Outlet flange: Size -... /" x /" Size 7-6..." x /" B Size ID BC OD No. Holes Hole Dia. Size A B C D L Side Holes Top/ Bottom Hole Dia. 8 7/8 9 / 7/8 /6 8 /6 /6 6 /6 6 / 9 / 7 / 6 6 /6 /6 8 6 / 9 7/8 / 8 /8 /8 7 /8 / / / / / / 6 7/8 / 9 /8 /8 /8 7 / 7 /6 /6 7 6 /8 9 /8 /8 8 /6 /6 /6 8 /6 7 / 7 / /8 7 /8 / /8 6 7/8 9 /8 / 7 / /8 /8 7 8 / /8 7/8 /8 7 9 9 9 7 7 6 9 9 /8 /8 8 /8 /8 /6 6 /6 /6 6 /6 8 / / 8 / 6 6 6 9 7/8 9 7/8 8 7/8 / /8 7 / /8 7/8 9 7/8 7/8 7 / /8 / 7 /8 7 9 9 9 6 8 7/8 6 /8 6 69 /6 6 / 7 6 6 6 /8 7 9 /8 6 /8 67 /8 7 7
Factory designed, unitary structural-steel channel base provides a package of Arrangement fan, motor, drive and guard. Available with rubber-in-shear or spring isolators. C B Built-in adjustable motor base provides adjustment of belt tension when required. Arrangement motor positions are independent of fan rotation and discharge. DIMENSIONS [INCHES] Size A B C D 8 6 6 / 7 8 /8 8 8 / 8 9 /6 /8 /8 A D MOTOR BASE MOUNTING PLATE B" dimension based on motor HP as shown in capacity tables at " WG. If larger motor is required, "B" dimension will vary. NOTE: Dimensions as shown are approximate. Exact dimensions furnished after order is placed. 7 6 9 6 6 6 6 6 6 6 8 / 86 / 89 / 9 / 99 9 / 7 / ARRANGEMENT 9 PEDESTALS-MOTOR SIZE CAPALITY Arrangement 9 configuration allows the motor to be mounted on either side of the fan pedestal as space permits. This space-efficient package consists of fan, motor, V-belt drive, and accessories. C-NW is not a NEMA standard dimension and varies by manufacturer. As a result C- NW must be checked in every instance. To determine if arrangement 9 configuration will work, compare the desired motor's frame size with the frame size shown for the appropriate fan below. If the frame size and the C-NW dimension are no greater than that shown, the combination is satisfactory. If the C-NW dimension is greater than that shown, a different motor, fan, or arrangement must be selected. In all cases, C- NW is the final determining factor. MOTOR WEIGHTS C /8 8 /8 7/8 6 /8 6 7/8 69 / 7 7/8 8 / 86 7/8 /6 / 7 / 9 / /8 6 /8 9 /8 7/8 NW Size 8 7 6 9 6 TEFC Motor Frame Size T 8T T T 6T 6T T 6T 6T 6T T T T T Maximum C-NW / /6 6 /6 /6 /6 / 7 / 7 /6 9 / / / 7 / 7 / Motor HP / 7 / 6 7 TEFC Motor Frame Size T T T 8T 8T T T T 6T 8T 86T T 6T 6T 6T T T T Motor Weight 8 9 6 9 6 8 9 6 78 8
Amperes as indicated in chart are nominal and were used for sizing starters only. DO NOT use these values for sizing heaters or other overload protection. Refer to motor nameplate for actual motor current and refer to the heater size chart for actual starters used. Actual conditions under which the starters will operate must be considered when sizing overload heaters. It may be necessary to increase heater size when starters are enclosed or exposed to radiant heat. Three Phase Single Phase HP Volts 6 Volts 7 volts volts volts Amps Starter Amps Starter Amps Starter Amps Starter Amps Starter / / / 7 / 6 7.8.6. 6.8 9.6. 8 68 8 9 9 6 8 6 6 6..8.6..8 7.6 7 6 77 96 6 8.8....7.9 6. 9 7 7 6 77 99 9 9.8.8 6 6 8.9 6.9 8 7 8 The above values of full-load current are for motors running at speeds usual for belted motors and motors with normal torque characteristics. Motors built for especially low speeds or high torques may have higher full-load currents, and multi-speed motors will have full-load current varying with speed, in which case the nameplate current rating shall be used. To obtain full-load currents of 8 volt and volt motors, increase corresponding volt motor full-load currents by and percent, respectively. The voltages listed are rated motor voltages. Corresponding nominal system voltages are to, to, to 8, and to 6 volts. 9
Inlet boxes are provided as an alternative to a sharp 9 turn prior to the fan inlet. A properly designed inlet box provides predictable minimum entry losses normally associated with a sharp 9 turn...see the following page for correction factors. The inlet box is designed to bolt up to the fan inlet flange. It is necessary to isolate the fan from the inlet box with a flexible connection. A support leg with mounting plate is supplied with all inlet boxes. When a unitary base or isolation base is required, the base must be extended to carry the support leg of the inlet box. The support leg assembly is not intended to support additional weight from ductwork or any other system components. F 7 6 8 G 9 Position of inlet box is determined from drive side of fan. Inlet box positions, 8, and often require special construction to avoid interference with fan support structure. When unitary base is required consult Mapco for special layout. Inlet boxes can also be equipped with drains and bolt on cleanout doors. B Round flange dimensions match fan inlet flange. Base bar dimensions match fan dimension (P). Dimensions not to be used for construction unless certified. A C E D F () BASE HOLES INLET BOX DIMENSIONS [INCHES] Size 8 7 Fan Inlet A B C D E F G Material Area ft Thickness.8..9.7.89 7 / / 7 / /8 8 / /8 / /8 / 9/6 7/8 6 9/6 / /8 /6 7/8 /6 / / 6 /8 8 /8 7/8 / / 7 / / / 6 7/8 8 / /8 /6 /6 /6 /6 / Weight 76 7 6 6 9 7. 8.78.9..8 9 /8 /8 6 / 67 /8 7 7 / 6 / / 8 /6 /6 7 6 9/6 7 8 /8 9 /6 /8 /8 8 /8 / /8 8 / / / 6 / 67 / /8 /8 7 / /8 / / / / / / 76 7 9 8 8 6 9..8 8 /8 9 / /8 9 /8 9 / /6 / 6 /6 7/8 6 / 7 / 8 / 7 / /8 / / 7 99 Dimensions not to be used for construction unless certified. Tolerance + or - /8"
When equipped with an inlet box, the fan must be selected at a pressure that compensates for losses occurring as a result of the inlet configuration. The procedure outlined below does not consider the slight change in efficiency. STEPS. Determine air velocity at fan inlet. CFM divided by fan inlet area = V [air velocity].. Determine velocity pressure at fan inlet. VP =[V divided by ] x [density divided by.7]. Determine VP/SP ratio at conditions.. Determine VP factor from appropriate chart.. Determine inlet-box loss by multiplying the VP factor times the velocity pressure from step. 6. Add the loss from step to the required system SP at conditions and select fan accordingly. Actual operation will require slightly lower horsepower than that indicated. Performance curves illustrating precise fan capacity and horsepower data are available per job. EXAMPLE Required: A size Series Fan, wheel, for,96 CFM at " SP at 7 F. at sea level..,96 CFM divided by.9 [fan inlet area, see page 9 ] = 9 FPM.. [9 divided by ] =.9 VP...9 VP divided by " SP =.8 VP/SP.. VP factor at.8 VP/SP =. [from Chart I]... x.9" VP =.8" loss. 6..8" + " =.8" SP. Select fan, motor, and drive for,96 CFM at.8" SP at 7 F. at sea level. CHART I BACKWARDLY INCLINED FANS VP FACTOR [Factor X inlet VP = SP loss].........6.8.....6 VP/SP [based on fan inlet VP]
For a given fan size, wheel design, CFM, and static pressure, capacity tables can be used to obtain outlet velocity, fan, and BHP. If capacities are at conditions other than 7 F., sea level, or standard density [.7 lb./cu. ft.], correction factors must be applied to static pressure and BHP PROCEDURES STEPS EXAMPLE: A fan is required for 8 CFM at " WG at F. and sea level. If conditions other than standard are involved, correct static pressure for actual altitude and temperature using Charts II and III. Chart II gives a. factor for F. Corrected SP is " WG x. =.9" WG at 7 F. Select fan from capacity tables for 8 CFM at.9" WG. (use." WG). Select size, wheel type,, and BHP of fan from capacity table. Check minimum safe speed of fan at operating temperature as shown in Charts I and IV. Determine actual performance at operating conditions by correcting SP and BHP. A size with wheel is selected for 8 CFM at." WG at and.6 BHP. From Charts I and IV, the maximum safe speed of a Size fan with Class II wheel at F. is 9 [6 x.97]. Fan is satisfactory for operation at F. Actual performance: 8 CFM at " WG [.9" divided by.] at at.9 BHP [.6 divided by.] at F. All ratings shown within the tinted areas on capacity tables are within % of peak mechanical efficiency. MAXIMUM SAFE SPEED INFORMATION Chart I details maximum safe speed of standard wheel at 7 F. When temperatures are involved, multiply the approximate safe operating speed shown in Chart I by the factor shown in Chart II. Size Class I Class II Class III Temp. F. Factor Temp. F. Factor Altitude Factor Temp. F Steel 8 7 NA -.77.9. -. 8 6 NA -.8.. 7. 8 7.87 7.9..97 77 9.9..6.9 6 9 6.9.8.8.9 7 8 6.98...9 8 66 9 7. 7.8. 6.9 7 9 8..6. 6.89 6 6 7.6.7.6 9.9.8.8 88..9. 9 78 8 6.7 6.. 7 9 7 6 6 8 8. 6.. 6 7 8... 9.. * Maximum safe speeds apply only to wheels operated at or below stated temperature and free of material build-up corrosion, or wear. Note: When more than one correction is made, the factors are combined by multiplying the factors.
SIZE Wheel diameter: / Wheel circumference:.7 Fan outlet area:.86 ft Maximum BHP =.7 ( ) / SP / SP SP / SP SP / SP SP / SP SP BHP BHP BHP BHP BHP BHP BHP BHP BHP 688 8 6.8 9. 66.6 86 7. 9.6 9. 679. 898.... 7.7 9.9.6. 9.6 6. 8. 8.7.7 7.86. 68.8 76 6 9.6 68. 777.9 9..67 8.8 6.97 87. 7. 8 8 7. 88. 9.8 7.6 9.78 77.9. 66.8 79.6 7 89. 97..8.7 7.9 8.8 68. 78. 876.6 89. 8.6.7.88 7. 6. 77. 8.6 968.8 6 9.67 8.7 7.8 79. 6. 78. 87.6 99.8 7. 6 6 7.8 9.9. 66. 7. 88.6 969.8 77. 8.6 8 8.99 97.9 6.9 77. 88.6 99.8 97..9. 8 699.9 76.9 8. 9.6.8.7..6 8.8 / SP SP / SP 6 SP 6 / SP 7 SP 7 / SP 8 SP 8 / SP BHP BHP BHP BHP BHP BHP BHP BHP BHP 76 6 868.9.68 8 8 98.6.8 8..6 6.7 7.8. 9..6 7.68 8.9 69. 89 8...6.68.9 69. 7.9 797.7 8.6 97.89 6 8. 9.7 96.7.9 6.7 77. 86.66 6 6 88.9 9.7 9.96 9. 689.6 78.7 88.96 9.9.8 8 8.76. 9. 686. 78.76 87. 96.9 977. 68.9 8. 6. 78.8 79.8 887. 97.8 6.6.6.8 9.9. 7 6.7 7.6 89.9 99.9 996.8 8.76 6. 9 778.7 86. 96.9 6.7.87 9.6 66.. 96 6 98. 99.9 7.69 7.98 7.9 68 8 6. 6.8. SIZE Wheel diameter: Wheel circumference:.97 Fan outlet area:.9 ft Maximum BHP =. ( ) / SP / SP SP / SP SP / SP SP / SP SP BHP BHP BHP BHP BHP BHP BHP BHP BHP 8 866. 996.8 6. 9 98.7 7. 7. 7.6.6 8 6. 6..8 9. 9.7 7.9 86 77. 66.9 8.7 7.66 67.86 799.7 97. 6. 9.78 6 6 99. 76.9.8 96.79 7. 86. 99.6.7.98 8. 9.6 6.7 69.9 8.7 9. 6.66 7.9 8.9 8 8.6 6.76 679.87 799. 97.6.6 9.88.6 9. 88 676.8 78.9 796. 9..7 6.8 8. 8..7 96 8. 86. 98.6 6. 8.8 8.. 7.7. 6 97. 99.7..8 9...7.6 99.9 6 8 7.9.6 69.78 6. 6. 6.7.8 66. 699.79 87.79.9 97. 87. 76.78 8. 6.7 7.8 8. / SP SP / SP 6 SP 6 / SP 7 SP 7 / SP 8 SP 8 / SP BHP BHP BHP BHP BHP BHP BHP BHP BHP 6 6 8..6.97 8 9.8 96.77 6.8 698.8 798.7 8.7. 66.6 7.68 8. 96.6.7.6 88. 6.6 76.69 796. 88.7 97.7 6.8..8 96 98.7 686.7 77. 89.9 9.76 8. 9. 9.88 66 6. 6 686.7 768.8 8. 9.8.9 9.6 7.9 6. 6.7 6 8 777. 86. 96.88. 88.6 6 6. 8 6. 6.8 87 876.8 9.96..7 7 6.7 7 6.8 7 6.98 8 978.6 9.6 9.86 9 6.9 6 6.7 7. 86 86.6.99 6. 89 6.86 7 7. 6 6 9 6. 9 6.9 7. 9 8 6 6.78 Performance shown is for fans with outlet ducts. Selection within tinted area renders most efficient operation. BHP shown includes drag, but not drive losses.
SIZE 8 Wheel diameter: 8 / Wheel circumference:.77 Fan outlet area:.9 ft Maximum BHP =. ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 6 8 68.6 797. 9 79. 88. 9..6 8.9 896.8 978.9 7.7 87. 688 89.8 968.8.6 8.86 6. 8. 7 6 98.9 8.6.7 7. 9. 78.6 9.97 7. 6 8 7.6.7 9.89.8.9.8 69.9 7.7 8.97 9.9 8 67.78.9 7.8 78. 78.7 76.7 676. 77.8 867. 99.68 6.97. 6. 7.6 9.99 6.6 7.7 89. 98.7 99. 68 8.9 6.7..9 6.8 7.67 79.7 877. 97.9 8.9 99 6..6.8 67. 76.6 78. 86. 9.9. 9.8 76 8.7 97.9 67. 77.8 79. 86. 97.88 9. 8.8.9 76 6.6 69.9 7. 8.96 876. 96.87 6. 8.8 9. 6.8 SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 79.7 6. 6.6 68 8.86 77.86 6.9 7 8. 99 6 67. 6. 6 7. 6 8. 7 9.7 87. 76 8.8 6 6.8 99 7.9 6 9.9 768. 89.6.9 76 8 6. 6 7. 6 8. 67 9.7 8. 9..6 6.9 8 6. 6 6.9 7 8. 97 9. 78. 8.7 97. 7. 89.8 7. 8.7 68 7.9 8 8.7 66 9.9 77. 887. 999.8. 6.6 9 8. 7 9.6 69 6 96 8. 67 9.7 77.7 87. 96. 7.7 6. 7 7. 6 9. 69.6 796 8 7 9.9 68. 787.6 89.9 996..7 7. 8.7..6 768 6 9.87 7. 87. 9.8. 6 6.6 8. 9.6 6. 88 8.7 9. 6. 96.9 9 7. 8 8.9 7. 6.9 96 8 99.8 8. 6 6.7 8. 9.8.. SIZE Wheel diameter: / Wheel circumference:.8 Fan outlet area:.8 ft Maximum BHP =. ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 8 8 7. 66.8 8 6. 77.7 78.6 698. 76.9 88.7 9. 99 77.9 8.7 887.9 996..7 6 6 8.77 9.9 9.. 6. 8.8 8. 8 9.99 978.9..8. 8.8 67. 7.9. 7. 7.8 99.7 8.7 6.66 9..7 89. 6.97 6.6 67 9.6 7.8 77..6 6.8 97.6 68. 7.8 67.8 67 6. 68 8.9..6 8. 97.7 6. 9.76 9.9 67 6. 78 6.7 7 6 6..6 7.9 6. 69..7 9. 6 6. 7 6.7 77 7. 798 8.8 86. 9.6 8.9.7 6.6 66 6. 79 6.7 77 7. 8 8.7 8.7 7.7. 6.7 6.9 678 6. 7 6.79 786 7. 89 8. 89 9. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 67 78 6.8 868 8. 68 78 7. 9 8.9.6 7 6 8 8. 9 9.6 6. 66. 798 8 88 8.9 99. 98..9.7 7.6 8 9 9.76 7. 6. 6.9 6.8 8 8.7.8 9 6.7.. 9 6. 8 7.8 78 9.9 6.9 6. 7 6. 969 7.7 6.. 6 7. 9.. 67. 69. 777 7.6 88 9.9 6 6.9 8.7 6. 8. 86. 68. 6.6 7 6.8 8 9. 896. 8 8. 96 6. 79 7.9 6 9.9.9 6. 7 6. 78 8. 86.7 8. 6 7. 9.. 99. 677. 7 7.7 87. 8. 6. 8.6 6.6 76 6.9 797 9. 867. 68 8 8.8 67. 77 6. 79 8. 89.8 Performance shown for fans with outlet ducts. Selection within tinted area renders most efficient operation. BHP shown includes drag, but not drive losses.
SIZE Wheel diameter: / Wheel circumference: 6. Fan outlet area:. ft Maximum BHP =.9 ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 76 8. 6. 7. 6.7 79.7 6. 69.7 7.9 86.6 8 7.7 7.9 86. 9.6. 9.67 6 77.9 89. 86.9 9.88.. 6.6 6 8 8.9 887. 99.69. 9.8 67..6.76 86.9 69 98. 99.78 997. 7.6..88 8.7.8 8 6. 8 6.8 79 99.89.8 68.8 7..7 7.. 97.88 9 6.6 7.6 88 69..6.98.6 68. 9. 88.77 6 6. 7. 6 8.8 897 6 6.8 8.8. 7..97 9.7 7 6. 7. 7 8.6 6 9. 966 8. 6.79 86.6 6.9.7 6 6. 8 7. 6 8.7 6 9. 66 9.9.8.8 6.88 8.7 7 6. 7.6 7 8. 6 9. 67. 78. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 79 79 8.9 697. 88 68 9. 79.9 8.8 897 6 66 9.9 766.7 867.7 969.8 6 7.9 966 8 7.8 89.7 96.7 6.9 9 9. 8. 76.9 89.9 9.9 8...6. 86 7.7 8. 9. 997 7. 8 9. 68.7 9. 6.6 9. 9.8 7 88. 96 6. 7 8. 9.8. 9.7 69 8..7. 98 6. 6 9.7 7.8. 8. 6.8 7. 9.9 8. 8. 6 8. 8 7 7. 8 9. 6.8. 8 6.6 8 9. 6.8 7. 98 7. 8 7 8.7 7. 8. 89.9 6 8...7 7 6. 8. 76.8 7. 7 9.9 7.6. 6 8. 66 8 6 6. 9 9. 7.9.6 99 7. SIZE 7 Wheel diameter: 7 Wheel circumference: 7.6 Fan outlet area:.9 ft Maximum BHP =. ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 8 7.6.6. 9 9.8 6.68 67.89 8.6 6.86 66.9 76.6 866 9.8 66.9 696. 79.9 886. 97.8 67 6 6.9 697.6 7.6 88. 9.89 99.8 7. 7 8 7.8 7.69 79. 87.6 98..6 9.8 6.6 6. 88 77.7 8.7 88. 99. 99.86 7.6. 9 6.7 7.7 7 8.8 98 86.7 87. 9.9 97.66. 98.6 6 6. 6.98 8 7.89 8.8 6 899.66 9. 96.7.7 8..98 6.87 8 7.8 8.7 7 9.7 89 6 96. 99.67. 8.97 6.87 9 6.79 7.7 98 8.7 9.7.7 7 8 9.9 8.6 8.8 9.77 9 6.7 7.68 9 8.69 9.69 9.7.8 7 9.6. 7.6 99 6.6 7 7.6 96 8.69 9.7 9.8 8.9 8. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 98 99 9.86. 6.7.9 6. 89 6.8 7. 6 6. 7 8.8 7 8 9.9 8. 68 7.6 77. 89.6 99. 7. 6 6. 79 8.9 797. 88. 96 6.9 7 9.8 8 7. 69 8. 7. 87. 99.8 989 8.7 68..6 7.7 6 67 7. 699 9. 78. 86.8 99 7.6 6. 9. 6 6. 9.7. 8 6 666 8.6 7. 8.9 896 6.7 97 9...6 9 8.6 6.9 9 8 77. 79. 86.9 98 8.8 9.7 8.8 7.9. 89. 676 767. 89. 99 7.9 979.9 7.9 6 7. 8. 9. 6 6.8 86 87 6. 9 9. 7. 7.6 8.8 97. 9. 8.9 8 99.. 8 7. 68.9 7. 86 7.9 Performance shown is for fans with outlet ducts. Selection within tinted area renders most efficient operation. BHP shown includes drag, but not drive losses.
SIZE Wheel diameter: Wheel circumference: 7.8 Fan outlet area:.7 ft Maximum BHP = 6.77 ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 6 8. 8.67 7.6 6.8 6. 6 88.79.6 9. 689.99 78. 8. 66.66 7. 797.9 876.9 87 6 87. 68.68 668. 76.77 8.6 89. 966. 96 8 6.7 677.8 7.7 78.7 8. 9. 98.96 8 6.96 8. 69. 7.7 76.98 87.8 89.76 9.7 6.69 7 7.7 9 8.8 8 9.9 7 7.68 78. 8.8 87. 9.8 988 6.9 7. 8.6 9.77 6.9 8 89.8 88.76 867.7 9.9 976 6. 8 7.7 8 8.7 9.6 8.8. 6 868. 89. 9. 97 6. 7. 7 8.7 9. 69.8 6. 6. 76 8 9.8 9.8 977.96 7. 7 8.7 8 9. 6.7 9.. 97.6 98.7 9 6. 6.9 78 8.9 9. 66.7 9.. 9.7 6. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 7 9. 6.7 8 8. 77.9 7 8.7 6.6 7. 9. 7. 76 8.9 8 8.8.6 9.7 67 8. 7. 76 7. 8. 8. 67 6. 69 9.8 77. 8 6.8 6 9. 9. 69. 6 8. 77.8 79. 86 8.9 9.6 998 6. 778.9 8. 6 7. 67.6 7. 8 7.6 88. 9. 9. 8. 86 6 99.9 68 6. 68 9. 76.9 77 6. 8. 97.9 97 7.6.7 966 8. 6 8. 678.9 7. 89 9. 87.8 96 6.7 998.7 9.7 68 9 7. 6.8 77. 78 8. 8.8 9.6 96 9. 6.7 8 7.6 78 687. 77 6. 8. 86.8 99 7.9 976.9 6. 88 6. 86 8 79 8. 8. 9 6. 9.6.8 6 9. SIZE Wheel diameter: Wheel circumference: 8.6 Fan outlet area: 6.6 ft Maximum BHP =.9 ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 8 8 7. 8.8 66.7 6.. 7.96 9.9 7.6 66. 876 87. 9.6 7. 69.8 7.7 797.7 6 6.6 7. 68.6 678. 77. 8.6 877 6. 68 8 8.7 66. 69. 7.96 776.99 86 6.7 896 7. 9 8. 9.7 6.6 66. 69.6 7.67 89.7 86 6.9 9 8. 97 9.6 7.7 78. 77 68. 7.78 7. 79.8 87 6.6 898 7.87 99 9. 999. 8.8 97. 76.98 76.6 789.8 88 6.9 887 7.6 9 8.9 98. 9.7 7..6 676 6 788.8 8.8 87 6. 88 7. 9 8.77 97. 9.6 6.. 8 6. 78 8 8.8 86 6. 887 7.8 9 8.6 97. 6. 8. 98. 9 6. 8 7.7 878 89 6.9 98 7.7 99 8. 98 9.9. 6. 99. 8 6. 76 7.8 9. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 77.7 7 7.9 6 6. 9. 7.7 676 6 9 7.6 7.9. 8. 78 8 9. 97.6 7 6...8 9 7.8 878. 6.7 99 8. 7. 6. 68. 67. 86. 7 6.8. 9. 6 8.6 68.8 69 7. 7.6 87 6. 8. 9 9. 7. 7. 86. 6.6 7. 77. 8 9. 89 6. 6 6 6 7.8 6.7 9.8 9.9 6. 67 8. 7. 79 7.7 8 6.6 788 8. 66. 6 8.7 86. 6 7. 7.9 76 6.6 86 6. 87 66. 6. 7. 6.6 69 6. 67.6 7. 786 6. 8 6.8 89 69.9 7 9. 88.7 6 8. 69. 76 8. 798 6. 88 67.9 899 7. 8 8 69 6. 678. 7 6. 77 6. 8 66. 87 7. Performance shown is for fans with outlet ducts. Selection within tinted area renders most efficient operation. BHP shown includes drag, but not drive losses. 6
SIZE 6 Wheel diameter: 6 / Wheel circumference: 9. Fan outlet area: 7.66 ft Maximum BHP = 7.7 ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 68 8 6.6 766 6.8.8 6.6 99..8 8.9 6.8 7. 78.87. 8.9 6.6 6 6 86.8 8. 9.8 6.89 67. 7 6. 788 8. 9.87 88. 6.8 699.78 7 7.6 87 8. 89 9.8 78.9 6. 6. 68.6 7 6.66 78 8. 8 9. 878.9 9. 97. 68 67.66 6.8 67.9 79 6. 76 7.66 8 9.9 86.6 9. 9.8 989. 88 67. 697.7 78.8 76 7.8 8 8.77 8. 887.9 98. 969. 7. 996 6 7.6 7 6.7 76 6.9 8 8. 8. 88.7 9. 99. 997 6.8 6 8.6 8 8 77 6.7 79 7.6 8 8. 88 9.7 88. 9. 96.9 99 6.7 8 8. 6. 98 8 7.86 8 8.6 89 9. 89. 98. 96.8 99 6.7 9 8.6 6. 96. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 68 7. 88 8.7 8. 996 6 7. 7. 8. 8 8. 69 6. 8. 6.9 7 9. 98 9. 96 8.7 6. 7. 87. 6.9 6 6.8. 86.6 7. 8. 6 9.8. 6 97 9. 6.8 8. 7. 9 8. 86. 8. 96 6. 69 69. 7 77. 776 6.9 89 6.6. 6.. 9 6. 6 6.8 6 67. 668 7.9 98 8 7.9 9.8 78.7 9.8 8. 6 6. 86 6.8 67 7. 688 77. 6 7.8 6.9 8. 6. 8.6 6 6. 6 69.7 69 7. 77 8. 7 9.7 8. 86.7 6. 77 67. 6 7.8 667 78.6 7 8.6 6768 8 8.7 8. 6 6. 66 7. 68 76. 69 8. SIZE Wheel diameter: / Wheel circumference:. Fan outlet area: 9. ft Maximum BHP = 7.9 ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 78 8.76 9. 76. 9.89 7 6..8 9...7.7 66.8. 9. 896 6. 69.8 98..7 6 6.9 6 7.8 678 8 8.8 7.8.6 8.6 6 7. 68 8.8 7. 779.9 86.6 7.8 7. 67 6. 66 8.9 77 9.7 7. 79. 88. 88 7. 8 68. 89. 6.98 6 7.6 69 9. 7. 777.9 87.8 87 6.7 896 8.7 6.6 6 6.7 6 7. 69 8.87 78.7 766. 8. 8 6. 879 8. 96.6 6 6 67 6.6 67 7.9 69 8. 78. 76. 799. 8 6. 87 8. 9. 99.6 668 8 7 7.98 79 8.9 76 9.9 768.8 8.9 8 6. 868 8. 9. 9.6 96.9 79 77 9. 76. 779. 8.6 8.8 87 8. 9. 9.6 96. 99 7. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 78 9.9 9.8 7. 6 6 97.9 9.. 668 8 997 7. 6. 7. 8. 8. 79 9.8 8.8.. 8. 7. 979. 7.8 66. 8.7 76.6 6.6 8 66.8 6 8.6 8. 9 6.6. 9 8. 7 6. 97 7.7 7 77. 97 8. 9.9 6 6 7 8.8 68. 9. 69 6. 9 6. 67 68.6 6 7. 6 8.9 88.6 78 8. 8.. 97 6. 66.9 9 7. 8 79.8 8 86.8 9.8 7 88 6.. 8 8. 6.7 7 7. 6 78. 9 8.6 9.6 9 99. 96 6. 6. 7 67.7 88 7. 9 8. 7 88. 9.8 688 8 6. 79 7.8 7 77.9 8. 9 9.7 Performance shown is for fans with outlet ducts. Selection within tinted area renders most efficient operation. BHP shown includes drag, but not drive losses. 7
SIZE Wheel diameter: / Wheel circumference:.6 Fan outlet area:.9 ft Maximum BHP = 6. ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 9 8 76.9 9..7 79. 668 9.6 6. 97.8 6.8 96 6. 9.78. 79.9 6.9 8 6 98.7.6..78 7.6 6 9. 8 6.8 9.7 8. 8 6.79 7 8.9 69. 66. 7.6 78 7.6 96. 6 6. 8 7.97 99 9.9 6.9 68. 7 6. 79 8.6 796.9 8. 6.7 7. 9 9. 68. 66. 7.7 79 8. 776. 8.9 76 6.69 7 7.69 89 8.7 6.8 68. 69. 77 7.7 76. 79.6 88. 96 6 9 8. 6 9.8 67. 69.6 69.9 7 7. 7 9.9 786. 88. 8 7.7 89 8 6 9.78 6. 666. 69. 76 7. 7 9.6 78. 8.9 8 7.6 87. 7 677.7 69.9 7. 7 6.7 76 9. 789. 87.8 8 7.6 87. 899. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 8 8. 76 86 7.8 96. 96 6 88. 9 6.. 89 8 9. 99 9. 6. 7. 8.6 7 96 6. 98. 8.9 86.6 8 6.6 88 69.6 68 9 9.8 6..9 9.7 66.6 7. 9 8. 876 98.6 9. 77 7. 6 6. 7 7. 9 79. 6 86.6 9 9. 6 7. 7. 6. 8 68.9 9 76. 8 8. 8 9.9 99.9 68 9 9 7 8 8.9 87 9. 66.6 7 7. 6 8.7 9 89.6 98. 6 8 6 7 6. 7 6.9 8 7.6 99 79. 87. 8 9. 6 6 66.6 8 7. 8 8.7 7 9. 9 99.6 8 68 7 6 67 8 77.8 8 86.7 8 9. 7 87 SIZE 9 Wheel diameter: 9 Wheel circumference:.8 Fan outlet area:.8 ft Maximum BHP = 7. ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 8. 8 7. 8..8 66 99.98.68 6.. 9 9.7 6.6 8.8.9 86 7.8 8 6 6. 8.9 9. 7. 9.. 8 8 96. 6.6 8 6.7 8 8.. 6.7 6. 6 7.7 76.8 6. 69 7. 6 9.6. 8. 68 7. 6 9.6 689. 7. 6 66 6.9 8 7.7 8.86 6. 7.8 6 6. 67 9. 67.9 7.8 76 7.8 8. 9 9.. 66. 97.8 69 8.6 66. 69. 7 7. 7. 88 6 9 9.8. 69. 98. 68 8. 66. 68. 7 7. 7. 77. 86 8 76.8 9. 6.7 6 7. 68.6 68.7 7 6.9 79. 766. 79 6.9 6. 67.6 6 7. 66. 69. 76 6.7 7. 766. 79 6.9 86. SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 6 768.9 78.6 8. 88 6 799 6.9 8.7 98. 86 8 89. 87 7.6 9. 97 6.9 7. 8. 89.6 99 9. 986 67. 7.7 8 8. 6 86 8. 9 6. 98 6. 7. 8 8.9 9 89.6 6 99. 69 89.7 9 6.8 979 69. 77.6 6 86. 7 9. 8 88 76 9 968 6 98 7. 96 6.9 7.6 8. 8 9. 6 8 97 6.9 987 7.6 7 8.6 6 89.6 99. 9 8 8 9 9 7 9 976 68. 77. 86.6 88 9.9 6 6 6 6 99 6 6 7 6 67 7 8.6 7 9. 6 7 8 76 66 8 9.9 6 6 96 6 7 7 8 8 Performance shown is for fans with outlet ducts. Selection within tinted area renders most efficient operation. BHP shown includes drag, but not drive losses. 8
SIZE Wheel diameter: / Wheel circumference:.9 Fan outlet area: 6.9 ft Maximum BHP = ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 6 8 6.9 69.8 79.6. 7. 98.9 6. 79 6. 688 97.6. 6. 9 7.9 9 9.6 77 6 7.6 8. 69 6. 8.6. 9.8 6 8 7.7 76 6. 9 7.6. 7.8 7.6 8.6 78.8 8 89 6. 6 7.78 9. 8.9 9.7 7.7 8.9 9. 6 7.6 6. 7 8.9 7 9..9 8.9 6.9. 76. 66 6.8 66. 66. 68 9.9 69. 8. 6. 9. 68.8 96 6. 6 9.9 6.6 68 7. 99 6 87..6. 8.7 67. 9.8 69 9. 6. 67 7. 696. 776 8.7 6. 6 8. 7. 9. 69 9. 6. 667 6.9 69. 76. 76 7. 66 9. 78. 6.8 6 8.7 67.7 669 6.8 69. 7. 78 9.7 SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 7 69 8. 68 76. 79 9.6 99 6 7. 77.7 8 6.7 776 8 7 9.6 787 8. 8 67.6 879 77. 9 87. 76 76. 8 6. 88 7.7 89 8.7 9 9. 97 78 9. 8 68.6 86 78. 97 88.8 97 99. 986 6 78 8 6.6 8 7. 88 8.7 9 9. 96 6 7 7 9 7 7 69 6 89 7. 867 8.8 9 9. 9 978 7 86 9 6 7 7 696 8 86 77. 89 87.8 97 98.7 96 998 68 6 8 6 7 67 8 6768 88 8.8 9 9.7 99 6 98 8 7 8 7 67 9 8 78 97 98.8 967 999 6 8 9 6 7 87 86 8 996 6 9 8 9 69 6 8 66 96 SIZE 6 Wheel diameter: 6 Wheel circumference:.7 Fan outlet area:.7 ft Maximum BHP = ( ) / SP / SP SP / SP SP / SP SP / SP SP / SP 66 8.69 7..9 8. 8.97 69. 9. 7.9 898 69.86 9. 6.7 8.9 97.8 6 9.97 6.9 7.6 7. 9.6 6.8 76 8 6. 7.7 8 9.6 9..6 9 9. 9.7 6.6 7.9 67 9. 8.. 8. 7.7. 9. 6.7 9 8. 8 9.89 9.6 9. 7 6.9 6.7 9.6 8.6 7.8 7 7. 6.7.7 968.. 6.8 6 9.7 88.7 7.9. 6 6. 89. 6.8 8 6.8 6.7 6 8.8 89.8 7. 6. 6 6. 8.6 66. 6. 796 8 7 7.8 8 9.9 9. 6. 8.9 6.6 8. 6. 6. 68. 6...7. 6. 8. 6. 66. 66. 666 6.7 SP 6 SP 7 SP 8 SP 9 SP SP SP SP SP SP 67 6. 968 68. 686 6.7 8 6 6. 698 6.6 7 76.7 796 8 669 6. 7 7. 7 8. 79 9. 8 6 6 686 66. 77 77. 767 89. 8 8 88 7 66 76 7. 7 8. 78 96. 89 8 86 89 96 8 78 78 79. 76 9. 799 8 7 869 9 98 7 97 7 86 8 7 6 7 86. 78 98.9 87 8 88 9 98 9 67 98 8 97 7866 8 77 9. 86 7 88 87 9 9 9 6 96 78 996 9 6 9 88 796 88 6 89 889 99 8 9 7 979 88 9 8 98 87 87 9 9 66 99 8 987 97 9 996 8 9 9 7 9 7 977 9 6 8 Performance shown is for fans with outlet ducts. Selection within tinted area renders most efficient operation. BHP shown includes drag, but not drive losses. 9
B F D OD G BELT GUARD N H APPROX M OD U T W L OD INLET C A 6 8 U Q S R T W Inlet Flange Width - /6" X /8" Outlet Flange Width ½" X /8" ARRANGEMENT 9 DIMENSIONS [INCHES] Size A B C D OD F G H K L OD M OD N / / 7 / 8 / 7 / 7 /8 7/8 /8 6 / / /8 8 / / 9 / 8 /8 7/8 /8 Size O Q R S T U W BASE HOLE O SHAFT SIZE BEARING CENTERLINE SCROLL MAT L THICKNESS SIDE MAT L THICKNESS WEIGHT LESS MOTOR 7 /8 /6 / 8 /8 7 7/8 8 /8 / /8 /8 6 6 7 /8 /6 / 8 /8 7 7/8 8 /8 / /8 /8 8 Dimensions shown for PVC fans only. Dimensions not to be used for construction unless certified. Tolerance + or - /8". NOTE: On size 6 in Bottom Horizontal discharge with flange outlet, the flange extends below the arrangement 9 baseline. SIZE Wheel diameter: Inlet: 6-/8 Outlet area:.8 ft / SP / SP / SP SP SP SP SP SP 6 SP 7 SP 8 SP 9 SP SP BHP BHP BHP 9 6 6. 8. 98.. 8.8 9...7 77. 976. 7.6.7.8 8 678. 87.. 69. 6. 98.7. 97. 77. 9.6 7.7 6.8.9 78. 97. 99..7 6. 99. 8..8 76.9 97.69 8.8 76.9. 8 8 9. 8.6 9.7.9 7.7 6.6 8. 7. 8.66 7.77 7.89 78..6 8.6 7.8 9. 6. 78. 9. 67. 6.6 86.7.86 6.99 9. 96.8 6 7.9 96. 8. 9.6 868.7 6.7.9 668.7 888.8 9.97 79. 6.6 6. 7. 7.6.9 66. 96.. 9.67 77.8 9.9..6. 68.6 7.9 6. 67. 7.7 6..6 8.77 79.9.6. 86. 6.6 7.79 6 8 6. 7.9 79. 87. 69.8.7 67.89 88. 7. 6.8.8 6.78 786.98 66 78. 8.7 9.. 86.69.8 76. 976. 6.8.6.76 68.96 8.9 77 6 897. 98.7 6.6 7.6 6.8 6.97 86.8 7.9.8.77 98.97 7.7 97.9 79 6.6 8.69.7 7.78.9 7. 968. 7.8 6.8. 687. 89. 99.66 8 96.77 7.8.88.9 6. 87. 7. 66.78. 68.6 78.9 9.7 SIZE 6 Wheel diameter: Inlet: 8-/8 Outlet area:.9 ft / SP SP SP SP SP SP 6 SP 7 SP 8 SP 9 SP SP SP SP BHP BHP BHP 76 6 67. 9. 7. 6. 86.9 76.9 79.6 66.7 67.8 78.99 9. 6.8 7.8 9 78. 97.8 6.7 6.6 87.8 9.6 8.7 67.8 68.99 796. 9..66 8. 89.7 7. 69. 66. 87.6 9.7.8 9. 6.7 799.6 9..9 9. 7 8 98..8. 69. 9.68.8 99.99 7.6 66. 89.6 98.7 9. 9.7 6 7.7 6. 6. 776.66 979.8 67.99 8.8.8 666.9 86.8 99..8.99 76 6 9. 7. 68.6 87.8 66.. 8. 9.6 76.86 88. 99. 7.8. 879. 8. 7.77 97.98 7.. 9.69 6.9 77.7 97..69 88. 7.78 996 6.8 6.69 86.9 7.9 9.6 7.7 8. 7.7 88. 989.8 9.8.67 79.7 8 9.7 79.87 97. 8. 9.7. 67. 89.6 96.9 7. 9. 8.7 7.9 88.8 89. 89.7 7.7 66.9 77.7 99.7.9 6.7 8..7 8 6 869.8 99. 6.69. 7. 7.79 877.. 9.86 67. 8.6 99. 6.7.67 6. 8. 687.8 8. 98.6 7..9 6.79 78.9 8.8 9.. 6.8 799.6 9.7 88...96 6. 8.8
PLANNED ISOLATION: The isolation of machinery to prevent the transmission of vibration has become one of the important phases of modern plant engineering. Because concrete, steel, and other building materials are all good conductors of vibration, all mechanical equipment should be isolated. Properly planned isolation acts not only as a shield to prevent vibration transmission to the foundation, floor, the building structure and surrounding equipment, but it also materially reduces dynamic bearing loads. NOISE: With passage of the Noise Control Act of 97 and OSHA regulations which set limits to factory noise, it is important that all areas of noise reduction be considered. The use of a resilient medium between the equipment and structure acts to break the path of structural borne noise as well as noise resulting from sound waves that are magnified by the "sounding board" effect associated with machinery mounted solidly to the structure. Use of isolation does not reduce air borne noise which if found to be above allowable levels must be treated acoustically with acoustic enclosures or other sound absorbing devices. SHEAR MOUNTS: Elastomer-in-shear mounts provide up to /" static deflection. When assembled in series double deflection to /" is attained. By varying the durometer (hardness) of the elastomer elements or by assembling them in parallel, unlimited load capacity is attainable. Elastomer-in-shear isolators are available in unit, rail or integral base form and are commonly used to isolate a variety of machinery whose predominant disturbance is due to steady state uniform vibrations above 6 cpm. METAL SPRINGS: Metal springs become preferable when the required static deflections exceed /". Springs are highly efficient mechanical vibration absorbers and their lack of inherent damping and sound absorbing qualities may be readily overcome by the application of properly designed damping and sound absorbing materials. The use of spring devices for large deflections dictates the incorporation of leveling bolts in order to facilitate installation and to compensate for variations in deflection. Spring isolators are usually available either housed or free standing. Free standing springs are unrestrained devices which must be stable, i.e., where the ratio of the lateral to the axial spring constants is approximately equal; or where the outside spring diameter is at least.8 of the spring operating height. Housed springs vary in design and can be furnished with vertical and/or lateral restraints depending on the application. They are usually preferred over unhoused springs for in-plant installation. Springs are excellent isolators for both steady state vibrations and for impact. Typical equipment isolated for vibration are: Blowers Air Handling Units Pumps DONT'S for machine isolation Don t make a bouncing ball out of your machine. It's important that isolation be just right, not too hard nor too soft. At one point in it's softness resonance develops and with plenty of trouble. Don t ignore uneven weight distribution. If you do, the isolation will compress unevenly and the machine will tip. Excessive tipping or rocking may lead to serious trouble.
TERMS and DEFINITIONS AHP or Air Horsepower, is work done by the fan expressed as horsepower. CFM X TP AHP = 66 BHP or Brake Horsepower, is the horsepower absorbed by the fan. CFM or Cubic Feet Per Minute, is the volume of air moved per minute. Free Delivery is the condition under which a fan operates when no static pressure is present. HP or Horsepower, is the actual rated output of the fan motor used. ME or Mechanical Efficiency, is the ratio of horsepower absorbed (BHP) to horsepower delivered by the fan (AHP). AHP ME = BHP Standard Air is air which weighs.7 pounds per cubic foot, which is dry air at 7 F. dry bulb with a barometric pressure of 9.9 inches of mercury. SE. or Static Efficiency, is expressed as: CFM X SP SE = 66 X BHP SP or Static Pressure, is a measure of the force exerted by the fan in moving air through any ventilating system. TS or Tip Speed, is the peripheral speed in feet per minute of a propeller tip at any specified. TE or Total Efficiency, may be expressed as: CFM X TP TE = 66 X BHP VP or Velocity Pressure, is equal to the kinetic energy per unit of volume of the flowing air. It can be calculated from the formula FPM VP = TP or Total Pressure, is the sum of the static pressure (SP), and the velocity pressure (VP) at any given point in a ventilating system. FAN LAWS and FORMULAE used in Performance Calculations Fan efficiencies remain constant for symmetrical design. When one or more conditions change, the other conditions vary accordingly to certain fan laws for an established fan size, system of ductwork and air density. When fan speed is varied:. Fan's air-delivery will vary directly as the ratio. CFM = (CFM ). Developed fan pressures will vary as the ratio squared. SP = (SP ). Horsepower absorbed by fan will vary as the ratio cubed. HP = (HP ) When fan pressure varies:. Fan's air-delivery and will vary as the square root of the pressure ratio.. Horsepower absorbed by fan will vary as the square root of the pressure ratio cubed. When density of air varies:. For constant pressure fan speed, air delivery, and horsepower absorbed vary inversely as the square root of the density.. For constant air-delivery and fan speed-horsepower absorbed by fan and pressure developed vary directly as the air density.. For constant amount of air by weight-air-delivery, fan speed and developed pressure vary inversely as the density ratio.. For constant amount of air by weight-horsepower absorbed by fan varies inversely as the square of the density ratio. MOTOR DATA Unless otherwise specified, all motors furnished on Midwest Air Products fans are ball bearing and can be used in either horizontal or vertical positions. Totally enclosed non-ventilated, totally enclosed fan cooled, or explosion proof motors are available for belt driven units used for special applications. Many other special applications such as acid-proof, marine duty, outdoor weather-proof, chemical plant type, and vapor proof units are also available. Premium Efficiency motors and two -speed motors are available upon request. Area of a circle =.78 x (Dia.) CFM/ Area = FPM FPM x Area = CFM CFM/ FPM = Area
Highest Value Exhaust and Pollution Control Equipment Corrosion Resistant PVC Duct Corzan TM Duct Fiberglass Overlaid Duct Turnkey Installations and the Corzan TM Duct beat goes on Motorized Dampers Terminator TM Composite Mesh Pad Exhaust Hoods