OTR TIRE RANGE 6 CONTINENTS. OVER 120 COUNTRIES. THE GLOBAL LEADER IN OFF-HIGHWAY TIRES.

TIRE RANGE CONTINENTS. OVER 1 COUNTRIES. THE GLOBAL LEADER IN OFF-HIGHWAY TIRES. Tough tires for tough jobs Widest possible range Industrial & EM categories Dedicated Tread Pattern & Construction for each specific application Specially Engeered Heat and Cut Resistant Tread Compound for Better Performance Robust High Strength Casg

2 APPLICATION GUIDE AND TIRE CATEGORIES 3 SUPER TRAC - E3/L3 Width Earthmovg Tires Page 3 10-8 53. loaded Rollg 24.8 0 PR for Industrial applications (Reach stacker) kmph kmph 5 kmph 1 kmph static max load max load max load max load max load Pressure capacity capacity capacity capacity capacity /() 7 2 0 140 187 0 2 1 24 00 5 5 PORTSTAR PLUS (E4+) Width 18.00- E Niche Application Tires Page 5. 173. loaded Rollg 72 452 5 PR for Industrial (Harbour) applications kmph kmph 5 kmph 1 kmph static max load max load max load max load max load Pressure capacity capacity capacity capacity capacity /().0 210 4845 22 55 2 345 0 5 740 N.B: For port applications, imum recoended flation pressure is.0. You may consult the rim manufacturer for higher flation Pressure. All tires conform to T & RA and ETRTO Standards TECHNICAL DATA PORT (INDUSTRIAL USE) TIRES CONT. Super Grip E-3 18.00 - E-3 48 1. 3.7 ed 72. Rollg 0 187.4 PR 187B press 7.0 2 Recoended load, kg (lbs) 0 7 20 1 5 20, km/h (mph) 35 22 3 1 0 2 220 221 45 2 7 214 55 34 40 8 N.B: For port applications, maximum recoended flation pressure is.0 except for 18.00-/ PR (.4 ) You may consult the rim manufacturer for higher flation pressure. ALLIANCE SPECIAL APPLICATION DATA Port HIGH SPEED MOBILE CRANE 1.00R./ 2.0 High Mobile Cranes Recoended load, kg (lbs) ed to Dimension Rollg Laod press 435.1 148.5 1 2 70 7E, km/h (mph) static 5 3 0 70 0 5 0 2.0 8 170 5 2 40 0 8 77 70 50 43 1 4 3 0 2 00 180 0 10 0 0

18 PORT APPLICATION - DIAGONAL (CONT.) EARTHMOVING EQUIPMENT RECOMMENDED FOR: HMK, other contaer handlg applications. 3 SUPER TRAC E-3 RECOMMENDED FOR: Reach Stacker 5 PORT STAR PLUS E4+ 18.00-10 - 24 10-3 Mg represents one of the most challengg operatg environments for any tire. Sce the job conditions vary from me to me, proper selection of tire and equipment is critical for optimum performance. WHEEL LOADERS Used for pickg up and relocatg material a short distance away. The tire load fluctuates dependg on the conditions volved. WHEEL DOZERS The equipment is used for movg materials by pushg,draggg or gradg. The tire loads are relatively constant and speeds are low. Robust nylon casg and reforced, high strength bead guards provide excellent stability All purpose tire suitable for port and other dustrial applications Extra deep tread (E ) to ensure longer wear. Robust nylon carcass with higher number of actual plies Extra wide, reforced bead with superior compound (Wonder Bead) Wide and Flat Tread Profile provide larger ground contact area than most others can ARTICULATED DUMP TRUCKS ed for mg, quarry and construction equipment and adaptable to rough terra. The cab and dump box is joed by hge. RECOMMENDED FOR: Reach Stacker RIGID DUMP TRUCKS SUPER GRIP E-3 They are used for transportg loose material (sand, gravel, dirt) to construction site. 18.00 - SCRAPERS Used for quick loadg/unloadg of high volume material with ability to load and dump on the run under conditions like snow, mud, rocks, shale, gravel, dirt etc. Extra wide lugs provide superior traction and long wear MOTOR GRADERS Used for transportg loose material at construction sites and for landscapg and road matenance work. SPECIAL OFF-ROAD APPLICATION TIRES HIGH SPEED MOBILE CRANE MOBILE CRANE RADIAL 1.00R 10R 24 10R.5R.5R WHEEL EXCAVATORS Maly used construction and quarry operations requirg high liftg capacity and cycle time TELEHANDLERS Similar appearance and function to a forklift. However, the highly versatile telescopic arm that extends forward and upward make them unique. ed for high speed applications for transportation from site to site. Under Development Robust tire construction and design Special rubber compound for low heat build up Can withstand multi-retreadg and runng at high speed

4 TECHNICAL DATA FOR PORT (INDUSTRIAL USE) TIRES: EARTHMOVING TIRE RADIALS: 0 ALL STEEL RADIAL ALL STEEL RADIAL LOADER-DOZER TRANSPORT & GRADER.5R TRANSPORT & GRADER E2/L2/G2 ALL STEEL RADIAL EM LOADER-DOZER 1R.5R 1R.5R BIAS: MULTIPURPOSE RADIAL 5 MULTIUSE.5R 10R 24.5R 5/R 5/R 34 5/R 18 3/70R 18 5/70R 18 1R 1/70R 5/R EM 3/R EM 5/70R EM 1/70R 24.5/70R 24 5/70R 24 EM 455/70R 24 EM 5/R 2 TRANSPORT & GRADER All steel radial suitable for a wide variety of earthmovg equipment STEEL BELTED RADIAL EM LOADER-DOZER TRANSPORT & GRADER. 18.00R.00 10-24 1.00-18.00-18.00-18.00 -.00-1.00 - SUPER GRIP.00-24 TG 10-24 TG 1 - Open center design facilitates self-cleang Angled tread s provide maximum power, dig- and grip Special compound for excellent weather and ozone resistance PR, Stars static 1 kmph 5 kmph kmph kmph Inflation Pressure /() 435 10 5.1 5.8 4 721.8.4 3 50 37. 4.5 23.2 14.5. 21870 4 18 13 188 482 455 388 0 4 0 2 22 210 740 5 3 55 4845 8..00 8 53..0..00 4 1 005 5 8 38 24343 21 0 018 0 37700 100 385 0 5 1 355 775 370 140 8 5 0 0 875 21 50.00 8.0 48 5 738 3. 2.1 188.2 1877 73. 24 40.4. 48. 24.8 8 34.1 32 3 555 218.7 48 173 74 452...1 5.0 5 3 538 34.4 45.8 21.2 5.2.0 700 1 175 5 14 1 45 50 370 342 0 0 000 181 1875 405 40 370 3 0 2 22 210 740 5 345 55 4845 0 200 25 2 734 5 51 50.4 3 0 5 23 24 1 773 87 25 535 53735.0 0 2 22 210 740 5 345 55 4845.0 0 8 8 00 70 240 20 L4S A unique, non-directional tread design works well both on and off-road applications and facilitates self-cleang Long service hours, best traction and ridg comfort E2/L2/G2 1.00R.00-24 Advanced compoundg provides exceptional wear All steel casg ensure superior durability and puncture resistance STEEL BELTED EM RADIAL ed for Industrial Applications E3/E4 1R EM.5R 2R R Sophisticated tire construction provides optimum performance and long service hours Rollg RADIAL 1R EM.5R 2R R.5R LOADER-DOZER 00 Width E3/L3/G3 0 8.5.0. 18 0. 7.2 45 1.3 32 SUPER TRACTION.00-24 TG 10-24 TG 1.00-24 TG.5 -.5 - SUPER TRACTION (E-2, L-2, G-2).00-24 10-24 NHS.5 -.5 - Specially designed to withstand rugged terras Superior nylon construction ensure prolonged wear.0 700 1 175 5 14 1 45 50 370 342 0.0 0 000 181 1875 405 40 370 3 L5S Dimension Width ed Rollg static 1 kmph 5 kmph kmph Pressure /() Inflation PR.00-24 8.5 3.2 70 52 23.3 148 8. 1 1 24 870 775 775 18 00 2 18.00 -.00 48. 173..2 452 5.0.5 8 0 57 2 48722 2 423 000 370

1 EARTHMOVING TIRE PORT APPLICATION TIRES: PORT APPLICATION - RADIAL BIAS: RECOMMENDED FOR: Straddle Carrier, Heavy Duty Lift Truck, Reach Stacker 0 RADIAL 5 RADIAL 1.00R 18.00R E2/L2/G2 8 L/G SPECIAL (E-2, L-2, G-2) 32 1 -.5 -.5 - WIDE GRIP 70' SERIES LOADER- DOZER 1/70 - EM 5/70-1/70-24 EM - 24 EM 22/70-24 5/70-24 TRANSPORT 1/70 - EM 5/70-1/70-24 EM - 24 EM 22/70-24 5/70-24 Heavy duty radial construction Optimized tread design ensures smooth wear Strong reforced sidewalls resist cut and snags Unique tread compound ensure extra long wear Extra large, high strength bead bundle offers creased load carryg capacity and stability Husky tread s are sized and angled for maximum traction and specially contoured to resist tearg and chippg Strong nylon construction PORT APPLICATION - DIAGONAL RECOMMENDED FOR: Empty Contaer Handler, Straddle Carrier, Reach Stacker (Steerg Wheel) 4 PORT STAR SMOOTH L4S RECOMMENDED FOR: Empty Contaer Handler, Straddle Carrier, Reach Stacker (steerg wheel) 4 1.00 - PORT STAR SMOOTH L5S E3/L3/G3.00 -.00-24 SUPER GRI P E-3, L-3, G-3 TRANSPORT & LOADER GRADER DOZER.5-18.00 -.5-2 - - 2.5 - Smooth, extra deep tread (L4S) for extra long wear Specially designed compound for low heat build up Large tread width for good traction on paved surfaces Smooth, extra deep tread (L5S) for extra long wear Specially designed compound for low heat build up Large tread width for good traction on paved surfaces RECOMMENDED FOR: Reach Stacker RECOMMENDED FOR: Straddle Carrier, Heavy Duty Lift, Truck Reach Stacker CONTAINER TRANSPORT E3 PORT STAR E3 10-24.00-24 Robust nylon carcass with higher number of actual plies Extra wide, reforced bead with superior compound (Wonder Bead) Wide and Flat Tread Profile provide larger ground contact area than most others can Under Development 1.00-18.00 - Wide base tubeless tire with self-cleang design, provides traction as well as high flotation all off-the-road applications. 3 1.00-24 TG EM SPECIAL.5-18.00 -.5-2 - - 2.5 - Superior grip mg and rock service applications Special compound to resist cut, chippg and wear EM SPECIAL 1.00-24 1.00 - ed for heavy duty jobs, bundle construction ensures long service hours TRANSPORT APPLICATIONS 2 SUPER TRANSPORT LUG.00 -.00 -.00-24.00-24 2 D.S LOGGER.00-.00- Unique semi-slick tread design for long wear Solid center mass with high land to void ratio for uniform and long wear Tread design provides excellent traction on all surfaces The special non-directional tread design and heavy-duty all nylon carcass result a strong tire that withstands cuts, snags and bruises under all service conditions

TECHNICAL DATA FOR EARTHMOVING TIRES NICHE APPLICATIONS - PORT EQUIPMENT For gag full advantage of contaer operations, the contaers must be moved efficiently, speedily and safely through the termals. This is accomplished by usg specially designed handlg equipment. Radial - Transport & Grader Applications Rollg Dimension Recoended,Kg (Lbs) - Transport Applications Inflation Pressure STRADDLE CARRIERS, Km/H (Mph) 1 35 22 45 55 34 0 37 1R 00.00/1.3 31 74 51 1.2 23.3 1.8 2 B 3 3 370 3 35 34 8770 8 84 82 0 770 75.5R 00 10/1.5 5 45 14 00.5 53 24.2 7.5 7 B 4 0 4370 420 40 42 41 00 1 000 8 4 0 00 88 5/R 18 371 84 3 200 4B 14. 38.7.4 4.2 0D 2370 20 220 52 40 21 40 21 0 00 0 45 43 40 3/70R 18 0 00 4 200 5B.7 3.4.3 4.2 0D 24 23 23 5370 520 0 40 21 21 00 40 45 40 5/70R 18 SDC 452 70 41 70 141B.8 42.1 18.1 1. 7D 3 2 1 0 75 24 20 570 55 50 70 1R 3 7 4 B 14.4 42.4 18.7 3.2 1D 240 24 2370 55 50 52 23 0 22 20 21 4 48 40 1/70R SDC 4 7 3 143B 1.8 42.4 18. 3.2 D 2 0 7 4 370 0 0 0 24 5 53 5/R 3 7 4 B 14.4 42.4 18.7 3.2 1D 240 24 2370 55 50 52 23 0 22 20 21 4 48 40 3/R 0 43 3 141B.7.4.4 8.3 D 3 2 1 0 75 24 22 570 55 50 4 5/70R SDC 4 7 3 2 0 0 0 24 7 4 370 0 5 53 14B 0 00 32 0 0 2.8 48.1 21.2.8 142D 70 70 71 7000 8 4 2 40 40 3 3 37 3 35 0 0 8 8770 8 81 77 73 0 00 32 0 0 2 70 70 71 7000 8 4 2 1/70R 24 SDC.5/70R 24 W14L DW14L 143B 1.8 42.4 18. 3.2 D 452 23 538 35 2 57 37 1B.8.1 22.3 1. 1D 452 23 538 35 14B 5/70R 24 SDC.8 48.1 21.2.8 142D 455/70R 24 W14L DW14L 40 40 3 3 37 3 35.8.1 22.3 1. 1D 0 0 8 8770 8 81 77 73.5R 0.00/2.0 2R 0./ R 0 22.00 /.5R 5 10/1.5.5R 0 10/1.5 2 57 37 1B 538 145 708 45 81 77 77 750 75 74 70 70 21.2...1 7B 1 0 0 17 10 14 10 50 05 1 732 1 0 8 5 4 0 870 185B 2 224 200 21 20 0 70 370 70 45 7 8 1 4 0 0 8 1 0 10 2.8 8.7. 1.2 3B 0 23 8 0 245 23.8 3.4 8.8 188.2 4 4 21. 53 24.4 10.2 7 45. 53 24.4 1.3 4 0 4370 420 40 42 41 17B 1 000 8 4 0 8700 800 0 0 57 570 5 550 520 17B 4 2 70 7 40 1 100 1 Self propelled gantry cranes which move on rubber tires. Capable of liftg up to Tonnes and a capacity for stackg usually with 3-4 contaers. SHUTTLE CARR IERS ed to transport contaers quickly from the quay crane to the termal area and back, capable of liftg up to Tonnes and with a stackg capacity of 2 contaers. RTG (Rubber Tyre Gantry) Giant gantries which can stack contaers upto a height and width other system can t offer. The entire contaer crane movement is parallel to the pier. REACH STACKERS Most flexible contaer handlg solutions for operatg a small termal or a medium sizeda port and capable of liftg up to 45 Tonnes. EMPTY CONTAINER H ANDLERS Used for handlg empty contaers, capable of stackg 7-8 contaers. AGV (Automated Guided Vehicles) Automated high speed contaer handler for transport between quay and stack yard. Fully computer controlled & can travel forward and reverse, sideways with position accuracy of ± 3. HMK (Harbour Mobile Cranes) Giant crane with rubber tire chasis for loadg and unloadg on ship s stern.

14 RADIAL - LOADER-DOZER APPLICATIONS SUPER TRANSPORT LUG Dimension.00-.00-.00-24.00-24 2 2 2 2 8.00V 8.0V5 8.V 8.5V5 8.00V 8.0V5 8.5 8.V 8.5V5 23.5 5.4 23.5 5.4 14 4 1 45.1 1.5 4.1 7 Dimension Recoended, Kg (Lbs).3 534 21 57 22.3 5 23 Rollg 55 2.1 35 2.1 55 2.1 55 2.1 PR, Inflation Pressure,Km/h (mph) 0 37 70 D, PR 143F 5.2 75 380 8570 70 2 00 570 2 0 57 24 0 2 50 S, 143F 5. 8 40 0 0 34 75 80 7 2 0 D, 14PR 14F.2 0 4370 3 8770 720 7 0 0 2 4 1 S, 14PR 14F. 0 4 00 40 37 8 34 700 0 70 00 70 D, 1PR 1F 4 0 5 43 5 0 00 7 710 0 70 7 200 S, 1PR 1F 7. 5 55 1 1 40 2 38 84 37 8 35 77 73 D, 14PR 14F 4 1 40 0 77 32 700 7 2 4 20 0 S, 14PR 14F.2 0 5 8 48 7 0 8 37 82 3 35 0 34 75 710 D, 1PR 2F. 50 4 4 3 8 3 770 35 77 30 7 720 S, 1PR 2F 4 5 50 1 7 80 3 8770 3 8 37 82 35 D, 18PR 1F 4 55 1 1 40 2 38 84 37 8 35 77 73 S, 18PR 1F 7. 5 0 5 1 40 0 43 40 40 0 40 0 3 8 37 8 D, PR F 7. 1 0 52 40 0 8 3 8 3870 85 3700 81 35 77 S, PR F 8.3 1 00 1 2 00 1 400 0 870 40 0 40 0 00 88 D, PR 1F 5.2 75 40 0 0 34 75 80 7 2 0 S,PR 1F D, 14PR 1F 5. 8.2 0 70 0 4 00 4 1 40 38 840 37 8 70 34 700 34 75 0 70 74 00 70 32 71 75 770 S, 14PR 1F. 0 50 0 4 43 40 370 87 3 70 3 770 34 700 D, 1PR 1F 4 5 8 48 7 0 8 37 82 3 35 0 34 75 710 S,1PR 1F 7. 5 0 5 1 40 0 43 40 40 0 40 0 3 8 37 8 D, 14PR 3F 50 4 4 3 8 3 770 35 77 30 7 720 S, 14PR 3F.2 0 0 170 450 0 40 0 0 0 88 84 D, 1PR F. 5 50 1 7 80 3 8770 3 8 37 82 35 S, 1PR F 4 00 1 2 00 1 400 0 870 40 0 40 0 00 88 D,18PR 1F 4 0 5 1 40 0 43 40 40 0 40 0 3 8 37 8 S,18PR 1F 7. 5 70 1 3 1 53 100 480 770 0 4 4 3 0 8 40 D, 10F 7. 5 00 1 2 00 1 400 0 870 40 0 40 0 00 88 S, 10F 8. 1 74 1370 7 14870 5 1 4 0 4 00 4 40 1R 00.00/1.3.5R 00 10/1.5 5/R 18 3/70R 18 5/70R 18 SDC 1R 1/70R SDC 5/R 3/R 5/70R SDC Recoended, Kg (Lbs) Rollg 31 74 51 1.2 23.3 1.8 5 45 14 00.5 53 24.2 7.5 371 84 3 200 14. 38.7.4 4.2 0 00 4 200.7 3.4.3 4.2 452 70 41 70.8 42.1 18.1 1. 3 7 4 14.4 42.4 18.7 3.2 4 7 3 1.8 42.4 18. 3.2 3 7 4 14.4 42.4 18.7 3.2 0 43 3.7.4.4 8.3 4 7 3 1.8 42.4 18. 3.2 452 23 538 35 21.2.8 SDC.8 48.1.5/70R 24 W14L DW14L 2 57 37.8.1 22.3 1. 5/70R 24 SDC 452 23 538 35.8 48.1 21.2.8 455/70R 24 W14L DW14L 2 57 37.8.1 22.3 1..5R 0.00/2.0 538 145 708 45 21.2...1 05 1 732 23.8 3.4 8.8 188.2 R 0 0./ 22.00 /.5R 5 10/1.5.5R 0 10/1.5 Off-The -Road 1/70R 24 2R er - Dozer Application 2.8 45 8.7 7. 1.2 4 4 14 4. 53 24.4 1.3 7 45. 53 24.4 1.3 Hard Improved Surface Km/H (Mph) Km/H (Mph) A2 50 70 7 0 A2 70 50 A2 14 A2 3 A2 1 A2 5 A2 1 A2 3 A2 5 A2 2 200 3 8 8 4 75 41 770 1 3875 52 5 75 41 770 1 4 3875 52 5 40 57 1 3 40 57 1 3 3 A2 0. 5 0 0 342 1 A2 140. 5 0 4 2 A2 100 0 0 00 A2 1. 24 7 0 5 A2 70 50 2 182 A2. 4 187 0 20 1 A2 1 A2 1 A2 1 A2

8 E-3/L-3 TRANSPORT & GRADER APPLICATIONS E-2/E-3/G-2/G-3 TRANSPORT & GRADER APPLICATIONS Dimension.00-24 10-24 1-.00-24 10-24 NHS.5-.5-: 1-.5-8 8.00W.00W.00W.00W.00W 10 SDC 10 SDC 3.1 34 1 3.8 4.5 5.5 34 1 4.5.3 48 77.3.3 48 48 142.7 77.3 48 Rollg PR, Stars, 2 22. 24.3 54 22.2 2 22. 24.3 5 23. 8. 54 22.2 5 23. 370 14.2 7. 37 14.5 370 14.2 7. 3 5.1 43 0. 37 14.5 3 5.1 Dimension Recoended, Kg (Lbs) Inflation Pressure, Km/h (Mph) 8B 2.0 2 24 53 2 50 PR 143B 3 0 14B 0 8 14PR 14B 73 710 1B 34 700 73 B 41 070 00 88 141B 1.75 75 570 PR 14B 2. 0 8 14B 3 73 710 14 PR 2B 0 35 14B 0 8 B 41 070 00 88 B 0 4 4 0 1B 50 70 1 3B 2. 370 82 1B 43 0 40 14B 1 00 1 10B 2.0 2 4 2 40 1PR 17B 5 100 PR 0B 3. 1 2 141B 1.75 75 570 PR 14B 2. 0 8 14B 3 73 710 14 PR 2B 0 35 3B 2. 370 82 1B 43 0 40 14B 1 00 1 1.00-24 1.00-3 3 Sw Od.. Rollg Recoended, Kg (Lbs) PR, Stars, Inflation Pressure 85 8 5.2 0 5., Km/H (Mph) 181A2 4. 2 1 187A2 7 214 0A2.5 4 00 2 0B 2 4B 700 10 7B.5 4 70 10 E-3/L-3 LOADER-DOZER APPLICATIONS Recoended,Kg (Lbs) er-dozer Applications 1.00-24 1.00-3 3.. 85 8 Rollg circum 5.2 0 5. Off-the -road PR, Hard improved Surface km/h (mph) km/h (mph) 181A2 4. 2 1 5.1 74 1 2 187A2 7 214. 10 0 0A2.5 4 00 2 7.8 1 143 5 0 A2.5 4 00 2 7.8 1 143 5 3 A2 7.5 0 0 1 5 342 A2 8.75 7 5.5 2 18 371

ALL STEEL RADIAL - GPR - 0 LOADER DOZER APPLICATIONS 1R.00/1.3 374 1.3 EM 14.7 L-3/E3 ed Rollg load press Off-the road Recoended, kg (lbs), km/h (mph) 5 3 1 press Hard Improved Surfaces Recoended load, kg (lbs), km/h (mph) 5 3 E-2/E-3/G-2/G-3 TRANSPORT & GRADER APPLICATIONS Dimension 1 77 53 38 10 70 0. 7 0 50 88.3 22.2 1.2 A2 0 70 0 0 1 220 2 50.5-8 5.5 142.7 Rollg 1R.00 / EM 1.3 E3/G3 374 77 14.7.3 ed 53 22.2 Rollg 38 1.2 load A2 10B Infl press 0 3. Recoended, Kg (lbs) km/h (mph) 3 0 0 850 0 84 1 7 370 820 20 0 35 22 2 4 3 770 200 35 0 45 35 0 34 770 55 34 74 1.00-24 TG.5-3.00VA 10SDC 4.5 48 8. 43 0. 85 5 23. 5.2 3 5.1 SUPER GRIP E - 3 (L - 3, G - 3) - 10-24.00 8 VA E3 53. ed Rollg 24.8.4 40 PR press Recoended, kg (lbs).5 0 10 1 0 4 8 570 0, km/h (mph) 35 22 5 5770 45 57 500 55 34 0 1 0 0 8 7 18.00-.5-2- - 2.5-.5 22.00/.00/ 48. 5.5 57 2 73 7 2.5 1 3.7 142.7 1 3.7 8. 1873 73.7 Recoended, Kg (Lbs) Inflation Pressure ALL STEEL RADIAL - GPR - 0 TRANSPORT AND GRADER APPLICATIONS Pr, Stars, 72. 8. 71.2 770.3 8 32.2 0 187.4 43 0. 185.8 0 2.4, Km/h (Mph) 10B 2.0 2 4 2 40 1PR 17B 5 100 PR 0B 3. 1 2 3 A8 2. 70 10A8 40 4370 1A8 1 00 1 3B 2. 370 82 1B 43 0 40 14B 1 00 1 B 5.0 73 570 1 50 7 1B 5.0 73 82 181 00 1B 0 8 87 0 PR 187B 7.0 2 0 221 7 214 10B 2.0 2 4 2 40 1PR 17B 5 100 PR 0B 3. 1 2 4B 00 0 700 10 1B 2. 0 1 5 7B 75 10 70 10 1B 82 181 00 1B 0 8 87 0 181B 3 187 1 185B 5 0 0 370 188B 0 220 000 2 2B 4. 2 1 2 0 20 22 PR 185B 3 0 220 000 2 0B 3. 8 0 0 B 0 2 5

E-2/E-3/G-2/G-3 - LOADER-DOZER APPLICATIONS Dimension.00-24 10-24 1-.00-24 10-24 NHS.5-.5-.00W.00W.00W 8.00TG.00W.00W 10 SDC 3.1 34 1 3.8 4.5 5.5.3 48 77.3.3 48 48 142.7 E-2/E-3/G-2/G-3 - LOADER-DOZER APPLICATIONS Dimension Recoended, Kg (Lbs) 2 22. 24.3 54 22.2 2 22. 24.3 5 23. 8. Rollg 370 14.2 7. 37 14.5 370 14.2 7. 3 5.1 43 0. PR, er - Dozer Application Off-the-road Hard improved surface km/h (mph) km/h (mph) A2 4 3. 52 5 0 PR 14 A2 00 1 7 14870 18 A2 500 0 70 10 14PR 0 A2 5. 7 2.3 1 8 2 A2 4. 2 0 8 5.1 74 85 187 8 A2 70 1. 0 0 223 1 A2 3 40 57 PR 13 A2 3. 4875 7 3. 57 0 18 A2 500 0 4.8 70 750 10 14 PR 1 A2 1 5 5.7 00 182 A2 4 3. 52 5 0 PR 14 A2 00 1 7 770 18 A2 500 0 750 10 14 PR 0 A2 5. 7 2.3 1 8 2 A2 4. 2 0 8 5.1 74 85 187 8 A2 70 1. 0 0 223 1 A2 1 5 4.2 1 00 182 181 A2 70 10 5.7 2 7 A2 1. 0 1 2 4 A2 3 700 10 0 181 A2 1 4.2 1 1 2 18 A2 0 1 1.00-24 TG.5-18.00-.5-2- - 2.5-3.00VA 10SDC.5 22.00/.00/ 4.5 48. 5.5 57 2 73 7 2.5 48 1 3.7 142.7 1 3.7 8. 1873 73.7 Recoended, Kg (Lbs) Slr Rollg 85 5 23. 72. 8. 71.2 770.3 8 32.2 5.2 3 5.1 0 187.4 43 0. 185.8 0 2.4 PR, er - Dozer Application Off-the-road Hard improved surface km/h (mph) km/h (mph) 181 A2 4. 2 1 5.1 74 1 2 187 A2 7 214. 10 0 0 A2.5 4 00 2 7.8 1 143 5 1 A2 1 5 4.2 1 00 182 7 A2 70 10 5.7 2 181 A2 1. 0 1 2 185 A2 7.0 2 0 370 8.4 2 40 5 A2.5 4 00 20 7.8 1 10 4 2 A2 7.5 100 0.0 1 0 00 PR A2.5 8 000 374.4 1 22 5 4 A2 3 700 10 0 181 A2 1 4.2 1 1 2 18 A2 0 1 18 A2 5. 7 0 220.3 1 1 A2 2. 00 2.7 3 0 2370 18 A2 0 3. 52 1 1 A2 00 2 1 324 A2 5 5.7 18 371 A2 00 20. 10 4 8 B 0 2070 4.2 1 8 0 B 0 8 4.8 70 1800 41 3 A2 0 341 5.7 40 A2 000 374. 22 5 22 PR 2 A2 3. 100 0 3. 57 0 00 7 A2 4. 2 0 385 5.1 74 20 5 2 A2 5.0 73 000 418.0 87 0 0

14 RADIAL - LOADER-DOZER APPLICATIONS SUPER TRANSPORT LUG Dimension.00-.00-.00-24.00-24 2 2 2 2 8.00V 8.0V5 8.V 8.5V5 8.00V 8.0V5 8.5 8.V 8.5V5 23.5 5.4 23.5 5.4 14 4 1 45.1 1.5 4.1 7 Dimension Recoended, Kg (Lbs).3 534 21 57 22.3 5 23 Rollg 55 2.1 35 2.1 55 2.1 55 2.1 PR, Inflation Pressure,Km/h (mph) 0 37 70 D, PR 143F 5.2 75 380 8570 70 2 00 570 2 0 57 24 0 2 50 S, 143F 5. 8 40 0 0 34 75 80 7 2 0 D, 14PR 14F.2 0 4370 3 8770 720 7 0 0 2 4 1 S, 14PR 14F. 0 4 00 40 37 8 34 700 0 70 00 70 D, 1PR 1F 4 0 5 43 5 0 00 7 710 0 70 7 200 S, 1PR 1F 7. 5 55 1 1 40 2 38 84 37 8 35 77 73 D, 14PR 14F 4 1 40 0 77 32 700 7 2 4 20 0 S, 14PR 14F.2 0 5 8 48 7 0 8 37 82 3 35 0 34 75 710 D, 1PR 2F. 50 4 4 3 8 3 770 35 77 30 7 720 S, 1PR 2F 4 5 50 1 7 80 3 8770 3 8 37 82 35 D, 18PR 1F 4 55 1 1 40 2 38 84 37 8 35 77 73 S, 18PR 1F 7. 5 0 5 1 40 0 43 40 40 0 40 0 3 8 37 8 D, PR F 7. 1 0 52 40 0 8 3 8 3870 85 3700 81 35 77 S, PR F 8.3 1 00 1 2 00 1 400 0 870 40 0 40 0 00 88 D, PR 1F 5.2 75 40 0 0 34 75 80 7 2 0 S,PR 1F D, 14PR 1F 5. 8.2 0 70 0 4 00 4 1 40 38 840 37 8 70 34 700 34 75 0 70 74 00 70 32 71 75 770 S, 14PR 1F. 0 50 0 4 43 40 370 87 3 70 3 770 34 700 D, 1PR 1F 4 5 8 48 7 0 8 37 82 3 35 0 34 75 710 S,1PR 1F 7. 5 0 5 1 40 0 43 40 40 0 40 0 3 8 37 8 D, 14PR 3F 50 4 4 3 8 3 770 35 77 30 7 720 S, 14PR 3F.2 0 0 170 450 0 40 0 0 0 88 84 D, 1PR F. 5 50 1 7 80 3 8770 3 8 37 82 35 S, 1PR F 4 00 1 2 00 1 400 0 870 40 0 40 0 00 88 D,18PR 1F 4 0 5 1 40 0 43 40 40 0 40 0 3 8 37 8 S,18PR 1F 7. 5 70 1 3 1 53 100 480 770 0 4 4 3 0 8 40 D, 10F 7. 5 00 1 2 00 1 400 0 870 40 0 40 0 00 88 S, 10F 8. 1 74 1370 7 14870 5 1 4 0 4 00 4 40 1R 00.00/1.3.5R 00 10/1.5 5/R 18 3/70R 18 5/70R 18 SDC 1R 1/70R SDC 5/R 3/R 5/70R SDC Recoended, Kg (Lbs) Rollg 31 74 51 1.2 23.3 1.8 5 45 14 00.5 53 24.2 7.5 371 84 3 200 14. 38.7.4 4.2 0 00 4 200.7 3.4.3 4.2 452 70 41 70.8 42.1 18.1 1. 3 7 4 14.4 42.4 18.7 3.2 4 7 3 1.8 42.4 18. 3.2 3 7 4 14.4 42.4 18.7 3.2 0 43 3.7.4.4 8.3 4 7 3 1.8 42.4 18. 3.2 452 23 538 35 21.2.8 SDC.8 48.1.5/70R 24 W14L DW14L 2 57 37.8.1 22.3 1. 5/70R 24 SDC 452 23 538 35.8 48.1 21.2.8 455/70R 24 W14L DW14L 2 57 37.8.1 22.3 1..5R 0.00/2.0 538 145 708 45 21.2...1 05 1 732 23.8 3.4 8.8 188.2 R.5R 0 0 0./ 22.00 / 10/1.5 Off-The -Road 1/70R 24 2R er - Dozer Application 2.8 45 8.7 7. 1.2 7 45. 53 24.4 1.3 Hard Improved Surface Km/H (Mph) Km/H (Mph) A2 50 70 7 0 A2 70 50 A2 14 A2 3 A2 1 A2 5 A2 1 A2 3 A2 5 A2 2 200 3 8 8 4 75 41 770 1 3875 52 5 75 41 770 1 4 3875 52 5 40 57 1 3 40 57 1 3 3 A2 0. 5 0 0 342 1 A2 140. 5 0 4 2 A2 100 0 0 00 A2 1. 24 7 0 5 182 A2. 4 187 0 20 1 A2 1 A2 1 A2 1 A2

TECHNICAL DATA FOR EARTHMOVING TIRES NICHE APPLICATIONS - PORT EQUIPMENT For gag full advantage of contaer operations, the contaers must be moved efficiently, speedily and safely through the termals. This is accomplished by usg specially designed handlg equipment. Radial - Transport & Grader Applications 1R.5R 00.00/1.3 00 10/1.5 5/R 18 3/70R 18 5/70R 18 SDC 1R 1/70R SDC 5/R 3/R 5/70R SDC 1/70R 24 SDC.5/70R 24 W14L DW14L 5/70R 24 SDC 455/70R 24 W14L DW14L.5R 0.00/2.0 2R 0./ R 0 22.00 /.5R 0 10/1.5 Rollg Dimension 31 74 51 Recoended,Kg (Lbs) - Transport Applications Inflation Pressure STRADDLE CARRIERS, Km/H (Mph) 1 35 22 45 55 34 3 3 370 3 35 34 1.2 23.3 1.8 2 B 8770 8 84 82 0 770 75 5 45 14 00 4 0 4370 420 40 42 41 00 1 000 8 4 0 00 88.5 53 24.2 7.5 7 B 371 84 3 200 0 37 2370 20 220 21 21 0 00 52 40 40 0 45 43 40 24 23 23 21 21 00 5370 520 0 40 40 45 40 75 24 20 3 2 1 0 570 55 50 70 240 24 2370 23 22 20 21 55 50 52 0 4 48 40 2 0 0 0 24 7 4 370 0 5 53 240 24 2370 23 22 20 21 55 50 52 0 4 48 40 75 24 22 3 2 1 0 570 55 50 4 2 0 0 0 24 7 4 370 0 5 53 14B 0 00 32 0 0 2.8 48.1 21.2.8 142D 70 70 71 7000 8 4 2 40 40 3 3 37 3 35 0 0 8 8770 8 81 77 73 0 00 32 0 0 2 4B 14. 38.7.4 4.2 0D 0 00 4 200 5B.7 3.4.3 4.2 0D 452 70 41 70 141B.8 42.1 18.1 1. 7D 3 7 4 B 14.4 42.4 18.7 3.2 1D 4 7 3 143B 1.8 42.4 18. 3.2 D 3 7 4 B 14.4 42.4 18.7 3.2 1D 0 43 3 141B.7.4.4 8.3 D 4 7 3 143B 1.8 42.4 18. 3.2 D 452 23 538 35 2 57 37 1B.8.1 22.3 1. 1D 452 23 538 35 14B.8 48.1 21.2.8 142D 70 70 71 7000 8 4 2 40 40 3 3 37 3 35.8.1 22.3 1. 1D 0 0 8 8770 8 81 77 73 538 145 708 45 81 77 77 750 75 74 70 70 21.2...1 7B 1 0 0 17 10 14 10 50 05 1 732 1 0 8 5 4 0 870 185B 2 224 200 21 20 0 70 370 70 45 7 8 1 4 0 0 8 1 0 10 2.8 8.7. 1.2 3B 0 23 8 0 245 7 45 0 0 57 570 5 550 520 17B 4 2 70 7 40 1 100 1 2 57 37 23.8 3.4. 53 8.8 188.2 24.4 1.3 1B Self propelled gantry cranes which move on rubber tires. Capable of liftg up to Tonnes and a capacity for stackg usually with 3-4 contaers. SHUTTLE CARR IERS ed to transport contaers quickly from the quay crane to the termal area and back, capable of liftg up to Tonnes and with a stackg capacity of 2 contaers. RTG (Rubber Tyre Gantry) Giant gantries which can stack contaers upto a height and width other system can t offer. The entire contaer crane movement is parallel to the pier. REACH STACKERS Most flexible contaer handlg solutions for operatg a small termal or a medium sizeda port and capable of liftg up to 45 Tonnes. EMPTY CONTAINER H ANDLERS Used for handlg empty contaers, capable of stackg 7-8 contaers. AGV (Automated Guided Vehicles) Automated high speed contaer handler for transport between quay and stack yard. Fully computer controlled & can travel forward and reverse, sideways with position accuracy of ± 3. HMK (Harbour Mobile Cranes) Giant crane with rubber tire chasis for loadg and unloadg on ship s stern.

ATG specializes the development, manufacture & sale of advanced Agricultural, Forestry, Construction & Earthmover tires worldwide. We serve clients more than 1 countries and offer a full spectrum of products range from basic entry-level tires to a broad range of superior quality, value added products. Our tires are developed and tested at our advanced R&D centre. For our onle catalog and for more details about Alliance Tire Group, please visit: www.atgtire.com OFFICES: ATC Tires India Pvt. Ltd. Unit No. & 7, High Street Phoenix A Wg, Phoenix Mills Compound, 42 Senapati Bapat Marg, Lower Parel, Mumbai - 0 0. Tel: +1 22 35700, Fax: +1 22 357. Alliance Tire Company Ltd. PO BOX No. 48 Hadera 3 Israel. TEL: 72 4 24 05 FAX: 72 4 24 0555 Alliance Tire Europe BV Vang 14A, PO BOX: 14, 40AC Halsteren, The Netherlands Tel: + (0) 14 70 Fax: + (0) 14 7 Alliance Tire Americas Inc. 1 Edgewater Drive, Suite 5 Wakefield, MA 018 Tel: 1-321-3 Toll Free: 0-343-3 Fax: 1-322-21 Alliance Tire Africa (Pty) Ltd. PO BOX 04, Lton Grange Port Elizabeth, 0, ZA Tel: 41 37 Fax: 41 4 Media contact: contact@atgtire.com Regional offices & representatives Argenta Australia Brazil Canada Cha France Germany Iberia Israel India Italy Scandavia South Africa The Netherlands Turkey USA Distributor: www.atgtire.com ATG