SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function)

SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, NAMUR, / 0 0 /-/ Série FEATURES The monostable spool valves have TÜV certified IEC 608 Functional Safety data and can be used up to SIL The solenoid operated spool valves have threaded port connections and NAMUR interface The same spool valve can be adapted for / NC or / functions for controlling double-acting and single-acting actuators All the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) The solenoid valves satisfy all relevant EC Directives GENERAL Differential pressure Flow (Qv at 6 bar) - 0 bar [ bar 00 kpa] 700 l/min (ANR) fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered - C to + 0 C () VMQ (silicone) + PUR (polyurethane) () -0 C for air operated versions. MATERIALS IN CONTACT WITH FLUID ( ) Ensure that the compatibility of the fluids in contact with the materials is verified Air operated CNOMO solenoid (pilot) interface Body, end covers Brass, AISI 6L Brass, AISI 6L Interface plates Glass-filled PA Glass-filled PA Spool valve internal parts Brass, stainless st., POM Brass, stainless st., POM Seals NBR NBR Pilot internal parts - Size (E06.6.0N), refer to catalogue pages: 0 pilot (CFSC/CFVT/ CFSCIS) and 60 piezotronic pilot (PISC/ PISCIS) AIR OPERATED SPECIFICATIONS pipe orifice flow coefficient kv operating pressure differential (bar) max. (PS) optional basic catalogue number min. air ( ) ( ) (mm) (m /h) (l/min) ~ Pilot air operated - spring return (monostable) / 6 0,7, 0 0 - A0 () Pilot air operated and return (bistable) / 6 0,7, 0 0 - A0 UP LP 0,00W - 0,W 0,W -,W Ultra Low power Low power RP - MP Not available Reduced and Medium power POWER LEVELS - cold electrical holding values (watt) BP Not available Basic power CNOMO SOLENOID (PILOT) INTERFACE SPECIFICATIONS pipe orifice flow coefficient kv operating pressure differential (bar) max. (PS) min. air ( ) power level optional solenoids basic catalogue number ATEX / IECEx IP6 Ex ia ( ) (mm) (m /h) (l/min) ~ ~/ CFSCIS PISCIS CFSC CFVT PISC CNOMO / NC - / - Solenoid air pilot operated - spring return (monostable) / 6 0,6 0 0 0 LP - - - C0 () / 6 0,6 0-8 LP m - - - - C0 () / 6 0,6 0 8 8 UP - m - - C0 () / NC - / - Solenoid air pilot operated and return (bistable) / 6 0,6 0 0 0 LP - - - C0 / 6 0,6 0-8 LP m - - - - C0 / 6 0,6 0 8 8 UP - m - - C0 Select 8 for NPT ANSI.0. or select G for ISO G (8/) Available feature Available feature in DC only. () Certified IEC 608 Functional Safety data, use suffix "SL". 6--9 80FR-0/R0

SERIES PREFIX TABLE power level description 6 7 UP LP RP BP C F S C Solenoid + spade plug DIN 60, 9, mm, industry standard B (EN 6070) - - - C F V T Solenoid with connection M, LED + protection (EN 6070) - m - - C F S C I S Intrinsically safe, 9, mm, pilot 0; ATEX (EN/IEC 60079-/6) * - m - - P I S C Solenoid, spade plug DIN 60, 9, mm, industry stand. B, ATEX (EN 6070) - - - P I S C I S Intrinsically safe, piezotronic 60 pilot, ATEX (EN/IEC 60079-/6079-6) * m - - - SUFFIX TABLE suffix power level description 6 7 UP LP RP BP G D Non-electrical, GD c, construction safety, gas/dust (EN 6-) - - - - M S Screw type manual operator () - / - - M O Push type manual operator / / - - S L Certified IEC 608 Functional Safety data / / - - OPTIONS & ACCESSORIES series exhaust pipe protector (stainless steel) G /8 6008 ( ) NPT /8 6008 () M 6008 () Available feature m Available feature in DC only - Not available * ATEX solenoids are also approved according to EN 6- (non electrical valves) () Not to use with "SL" suffix () Provided with "SL" suffix PRODUCT SELECTION GUIDE STEP Select the fluid temperature range and seal material from the general table on page 9. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications tables on page 9. Example: GC0 STEP Select (combination). Select the appropriate operator from the tables on pages 9 and 0. Select for this operator in the electrical characteristics table on page : the power level (UP, LP), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. Example : CFSC STEP Select suffix. Suffix MO mandatory for the pilot 0 (CFSCIS). Refer to the suffix table on page 0, respect the indicated power level. Example : MO STEP Selection of TPL, on page, is mandatory for the 60 pilot (PISCIS), HV DC ( mw) and HV DC ( mw). Add "X" between the "PISCIS" and the basic catalogue number. STEP Select voltage. Refer to standard voltages on page. Example : 0V / 0Hz STEP 6 Final catalogue / ordering number. Example : CFSC GC0MO 0 V / 0 Hz ORDERING EXAMPLES: CFSC G C 0 0V / 0 Hz CFSC G C 0 SL 0V / 0 Hz CFVT 8 C 0 MO 0V / 0 Hz PISCIS G C 0 MO 6V / DC PISCIS G C 0 SLMO 6V / DC PISCIS X G C 0 MS TPL0666 HV / DC G A 0 G A 0 GD G A 0 GDSL G A 0 pipe thread basic number voltage TPL suffix 6--0 80GB-0/R0

EXPLANATION OF TEMPERATURE RANGES OF SOLENOID VALVES Valve temperature range Operator ambient temperature range Total temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) The operator ambient temperature range is determined by the selected power level and the safety code The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above ELECTRICAL CHARACTERISTICS Coil insulation class F Electrical safety IEC Standard voltages DC () CFSC/CFVT: V CFSCIS: V - V ; PISC: V à 70V ; PISCIS: 6V, 8V, V, V AC (~) CFSC: V - V - 0V/0Hz - Other voltages are available on request PISC: V to 70V power ratings operator electrical ambient replacement coil inrush holding hot/cold temperature enclosure safety code option range (TS) protection type ~ ~ ~ () (VA) (VA) (W) (W) (C ) (EN 609) - - Low power (LP) CFSC,,, /, - to +60 EN 6070 moulded IP6 - - 0 CFSC, (6),6 (6), (6) - - to +60 EN 6070 moulded IP6 - - 0 CFVT () - - -,/, - to +60 EN 6070 moulded IP67/IP6 - - 0 CFSCIS ()() - - - 0, -0 to +0/60 II G Ex ia IIC T6/T Ga, II D Ex ia IIIC Da moulded IP6 - - 0 Ultra low power (UP) PISC - - - 0,007-0 to +60 - moulded IP6 - - 06 PISCIS ()() 6V - - - 0,00-0 to +0 II G Ex ia IIC T6 Ga, II D Ex ia IIIC Da moulded IP6 - - 06 PISCIS ()() 8V - - - 0,0-0 to +0 II G Ex ia IIC T6 Ga, II D Ex ia IIIC Da moulded IP6 - - 06 PISCIS ()() LV - - - 0,0-0 to +0 II G Ex ia IIC T6 Ga, II D Ex ia IIIC Da moulded IP6 - - 06 PISCIS ()() HV - - - 0,0-0 to +0 II G Ex ia IIC T6 Ga, II D Ex ia IIIC Da moulded IP6 - - 06 PISCIS ()() LV - - - 0,06-0 to +0 II G Ex ia IIC T6 Ga, II D Ex ia IIIC Da moulded IP6 - - 06 PISCIS ()() HV - - - 0, -0 to +0 II G Ex ia IIC T6 Ga, II D Ex ia IIIC Da moulded IP6 - - 06 - Not available () Refer to the dimensional drawings on pages and. () Piezotronic standard voltages: Prefix PISCIS: 6 V DC / mw 8 V DC / mw L V DC / mw H V DC / mw L V DC / 6 mw H V DC / mw Turn ON voltage U ON 6.. 9 V 7,.. V 0,8.. 6 V 0,8.. 6 V,6.. 8 V,6.. 8 V Turn OFF voltage U OFF V, V, V, V V V Peak current 6 ma 0 ma 6,8 ma 8, ma 0 ma ma Holding current 0, ma,8 ma ma,7 ma,9 ma, ma Cable + max. barrier resistances (R S + R C ) 00 Ω max. 00 Ω max. 00 Ω max. 70 Ω max. 00 Ω max. 70 Ω max. safety parameters () Intrinsically safe pilots: Check the electrical characteristics in the corresponding catalogue pages (CFSCIS: option U I I I P I L I C I (DC) (V) (ma) (W) (H) (µf) Low power (LP) CFSCIS 8 00,6 0 0 Ultra low power (UP) PISCIS 0 00 0,9 0 0 ELECTRICAL CONNECTIONS connection CFSC, CFSCIS, PISC, PISCIS CFVT ADDITIONAL OPTIONS 0 pilot / PISCIS: 60 pilot). () CFSCIS (0 pilot): V : I (ON) min., with LED ma; U (ON) min.,9 V; U (max.) recommended V; U (OFF), V; I (OFF) 0 ma V : I (ON) min., with LED ma; U (ON) min. 6, V; U (max.) recommended 8 V; U (OFF),7 V; I (OFF) 7 ma () Values for LED + protection. (6) AC: 0 V - Not available SERIES Spade plug connector with cable gland DIN 60, 9, mm, industry standard B, for cables with an outer diameter from to 6 mm M connection for M connector TPL numbers: TPL 066: Piezotronic, PISCIS, HV ( mw) TPL 0666: Piezotronic, PISCIS, HV ( mw) TPL numbers: TPL 067: LED and protection, CFSC - Add 0, W (DC) and 0, W/VA (AC) Only available in V AC/DC and V AC Set of stainless steel mounting screws, catalogue number 9780 Other pipe threads are available on request INSTALLATION Installation/maintenance instructions are included with each valve The solenoid valves and air operated valves can be mounted in any position without affecting operation IEC 608 Functional Safety (suffix SL), allowable temperature range: -0 C to +60 C Check temperature range of valve body and solenoid for suitability. For probability of failure, contact us Spool valve supplied with two interface plates with NAMUR mating surfaces. Depending on function (/ NC or /), position one of the two plates on the spool valve body before installing on actuator Dowel pin (if necessary), bolts and gaskets are standard supplied It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: 8 NPT (ANSI.0.); G G (ISO 8/) Valves with suffix "SL" are provided with a specific exhaust protector 6-- 80GB-0/R0

SERIES DIMENSIONS (mm), WEIGHT (kg) Type 0..06: CNOMO (E06.6.0N) Type 07: Air operated 8 A 9 9 A - ( x /8) ( x /) 6 9 mounting holes:, mm dia. (Spotfacing: 9 mm dia., depth mm) One mm dia. hole for dowel pin: - in position A: / NC function plate - in position A: / function plate O-ring seals (supplied) Exhaust reducer or exhaust protector 6 Interface plate 8 A 0 G/8 A 9 9 - ( x /8) ( x /) 6 9 TYPE 0: CFSC 0 pilot Polyarylamide IEC / DIN 60 TYPE 0: CFVT 0 pilot Polyarylamide IEC / connection M + LED and protection C0 / C0 C0MS / C0MS / C0MO / C0MO C0 / C0 C0MS / C0MS / C0MO / C0MO 60 7 9, M M 90 9 79 7 C0MO / C0MO TYPE 0: CFSCIS 0 pilot Polyarylamide IEC / DIN 60 EN/IEC 60079-/6 C0MO / C0MO TYPE 06: PISC / PISCIS Piezotronic pilot Polyamide IEC / DIN 60 EN 60079-/6 60 7 9 M M 90 9 90 9 80GB-0/R0 6--

SERIES DIMENSIONS (mm), WEIGHT (kg) TYPE 07: Air operated version No Use "SL", "GD" or "GDSL" suffix IP6 / II GD c A0 / A0 0 9 9 Connector rotatable by 90 increments (cable - 6 mm) Connector rotatable by 90 increments (cable 6-7 mm) Manual operator location Connectable pilot exhaust port type option power level weight () monostable bistable 0 CFSC low power 0,876,09 0 CFVT low power 0,876,09 0 CFSCIS low power 0,88,0 06 PISC / PISCIS ultra low power 0,86,06 07 - - 0,8 0,988 () Incl. connector(s), except CFVT. ACCESSORIES B 9 ØA ØA M /8 - B, 0 - exhaust protector (stainless steel) 6-- 80GB-0/R0