VISATRON VN301 plus VN301 plus EX Oil Mist Detection multi-sensor-system for 2-stroke engines Technical Information System Features: Based on experience of 53000 + Schaller OMD systems in the field Tubeless System - easy installation Automatic Opacity adaptation to engine in normal operation - False Alarm Free System even under frequent changes in engine load and rpm Extremely low maintenance cost - designed for engine lifetime Active Dirt protection of optics by clean air - only available from Schaller - no false Alarms Designed for vibrations beyond classification rules... a member of DIEMOS family SINCE 1956
VISATRON VN 301 plus /VN 301 plus EX technical data OIL MIST DETECTION MULTI-SENSOR-SYSTEM Functional overview The Oil Mist Detector (OMD) VISATRON VN301plus /VN- 301plusEX System from SCHALLER AUTOMATION protect large diesel engines against oil mist explosion, caused by spontaneously occurring oil mist. It is part of a safety system that secures life and health of the operating staff and prevents heavy damages to the engine. It is not possible to directly monitor all potential sources of oil mist inside a large Diesel, Gas or Dual Fuel engine. There are main bearings, large end bearings, pistons, liners, sliders, pumps, camshaft bearings, chains, gears or even tools left behind from installation all of these parts could produce oil mist e.g. in case of lubrication problems. Therefore the philosophy is to use the SCHALLER AUTOMATION OMDsystem detecting the primary origin of the danger, the oil mist itself, to prevent the engine securely from oil mist explosions. The VISATRON VN301plus /VN301plusEX System consists of the following parts: 1 to 20 VISATRON VN301plus Sensor Units 1 to 2 VISATRON VN301plus Central Units including compressed air distribution system and protection cover Ready made hybrid cables (electric and air supply) Monitoring device Remote Indicator II (optional) VN301 plus /VN301 plus EX Sensor Unit Dimensions See drawings Weight Sensor Unit: 850g Suction manifold: 350g Max. cable length Sensor Unit 30 m Engine mount Sensor Unit G3/4 M27x1.5 M33x2 IP Protection Class IP 65 VN301plus EX ATEX Certified according II /2G Ex op is IIB T4 /Gb 2
VISATRON VN301 plus /VN301 plus EX Central Unit Power supply Nominal voltage Power supply cable entry, cable diameter Relay Outputs Relay Outputs cable entry, cable diameter Communication interface to Remote Indicator Ⅱ Remote Indicator cable entry, cable diameter 18 Volts - 31.2 Volts DC, max. 3A 24 Volts DC M20, 6-12 mm Ø 2 x 'High Oil Mist Alarm' 1 x 'Ready' 1 x 'Oil Mist Pre-Alarm' (max. 60 Volts DC/ 45 Volts AC, 60W, 45VA, 1A) M25, 11-17 mm Ø 3 wire RS485, galvanically isolated M16, 4,5-10 mm Ø Communication cable recommendation LAPPKABEL UNITRONIC-FD CP (TP) plus UL-CSA, 2 x 2 x AWG20, max 400 m length 3
Environmental conditions Operating temperature +5 / + 70 C Storage temperature -25 - +80 C Max. vibrations 4 g (25-100Hz) / 1,6mm (5-25Hz) Air pressure reducer inlet pressure 4-12 bar Air quality ISO8473-1:2010-6-4-4 Air pressure reducer inlet threat G1/4 Air consumption 100l/h per Sensor Unit Relative humidity up to 95% Weight (with protection cover) 7kg IP Protection Class IP 65 classification type approvals of classes ABS, BV, CCR (TAIWAN), CCS (CHINA), DNV, GL, KR, LR, NK, RINA, RS Type approved for closed areas, designed for installation on combustion engines, environmental category D (GL), IACS UR M67 conform, list of type approvals see www.schaller.de What makes the VN301 plus unique on the market? False Alarm free operation Extremely low maintenance requirements Designed for engine lifetime Based on below innovations Only system on the market using pressurized air for every single sensor Use of Hybrid cables, leading air supply, signal and power supply via one cable, -> can be handled like ordinary copper cables, tubeless Pressurized air for active clean keeping of the optics -> no false Alarms, extremely low maintenance required Pressurized air for active extraction of atmosphere from engine -> fast reaction if engine needs to be stopped Floating opacity zero adaptation to naturally opacity of a normal running engine, even worn-> no false Alarms but fast reaction if engine needs to be stopped Every sensor heated -> no false Alarms due to humidity Designed for Vibrations beyond classification rules -> maximum operation reliability 4
electrical wiring 1-10 Sensors 11-20 Sensors 5
Headquarter Blieskastel Germany Busan Ft. Lauderdale Shanghai Singapore Service Partner: Contact Details See www.schaller.de Headquarter SCHALLER automation Industrielle Automationstechnik GmbH & Co. KG Industriering 14 66440 Blieskastel Germany Tel. +49 (0) 68 42 / 5 08-0 Fax +49 (0) 68 42 / 5 08-260 info@schaller.de For all Asia: Key Account Management Center Schaller Automation Singapore Pte. Ltd. 114 Lavender Street #09-93 CT Hub 2 Singapore 338729 Phone +65 6643 5151; 24/7 Service Fax +65 6643 5150 For all Americas: Key Account Management Center Schaller Automation LP 811 Shotgun Road Sunrise, FL 33326 United States of America Phone: +1 954 794 1950 ext. 115 Mobile: +1 561 289 1495 Fax: +1 954 794 1951 For all Europe, Africa and Middle East: Service Schaller Automation, Office Hamburg Admiralitätstraße 60 20459 Hamburg / Germany Phone: +49 (0) 40 / 253 2985 10 Fax: +49 (0) 40 / 253 2985 29 service.hamburg@schaller.de for all Key Account Management Centers and Service Partners see: www.schaller.de Projekt: SMM 2016 Erstellt am: 08/2016 Version: 1.0 Certified according to DIN EN ISO 9001 GLC-Cert.Nr.QS - 760 HH www.schaller.de