January 000 Bulletin 5.3:Vee-Ball Vee-Ball Designs V50, V00 and V300 Rotary Control Valves This bulletin covers the - through -inch, 3- through -inch Series B, and the 4- through 0-inch Designs V50, V00 and V300 Vee-Ball valves (shown in figure. The Type Vee-Ball valve combines globe valve ruggedness with the efficiency of a rotary valve. A shearing action between the V-notch ball and the ball seal (figure ) promotes smooth, nonclogging operation. The unrestricted straight-through flow design provides high capacity for gas, steam, liquids, and fibrous slurries. The Designs V50, V00 and V300 mate with a variety of ANSI raised face flanges, as well as with DIN flanges (see specifications). To meet specific application requirements, a variety of metal and soft ball seal materials are available. A splined drive shaft combines with a variety of power operated and manual actuators to provide reliable, high-performance throttling or on-off operation for many different applications in the process industries. Features Trim Versatility Trim components are interchangeable between Design V50, V00, and V300 valves. This feature allows you to reduce your spare parts inventory and maintenance procedures. The seal assembly can be changed without removing the actuator or without removing the ball from the valve body. Easy Installation-Flanged body design of the V50 and V300 eliminates exposed line flange bolting, reduces alignment and installation time, and promotes secure valve installations and piping integrity. Application Versatility The valves are available with ISA S75.04 and IEC 534-3- face-to-face dimensions as a standard construction, and optional ASME B6.0 short face-to-face dimensions. IEC 534.3. face-to-face dimensions are equivalent to S75.04 face-to-face dimensions. W749 / IL Figure. Design V50 Vee-Ball Valve with Type 05 Actuator and Type DVC Positioner Longer Service Life The solid HD metal seal (figure ) construction provides longer service life in demanding applications. The constant wiping action of the seal across the ball s sealing surface prevents scale and sludge buildup, and provides superior service on steam, gases, slurries, and various liquid applications. Smooth Valve Operation Precision machined parts and pressure balanced seal designs allow smooth, precise movement of the ball. (Continued on page 3) D0363X0
Specifications Valve Sizes and End Connection Styles Design V50: -, -/, -, 3-, 4-, 6-, 8-, 0-, -inch, flanged valves that mate with ANSI Class 50 raised-face flanges (see table ). Also, sizes 3 through -inch mate with DIN PN classes (see table ) Design V50, Size 4-, 6- and 0-Inch: Flanged raised-face valves. 4- and 6-inch valves are available in ASME B6.0 Short, face-to-face dimensions only (see table and figure 8) Design V00:, -/,, 3, 4, 6, 8, or 0-inch flangeless valves that mate with ANSI Class 50, 300, or 600 raised-face flanges depending on size (see table ) Design V300:, -/,, 3, 4, 6, 8, 0,, 4, and 6-inch valve sizes mate with ANSI Class 300 raised-face flanges. Also some sizes mate with DIN PN classes (see table ) Maximum Inlet Pressures () Design V50 or V300 Steel, CF3M (36L Stainless Steel) or CG8M (37 Stainless Steel) Valves: Consistent with Class 50 for V50, or Class 300 for V300, pressure-temperature ratings per ASME B6.34 or with DIN pressure-temperature ratings shown in table but do not exceed the material temperature capabilities shown below or the pressure drop limitations. CF3M is available in all areas and is the standard material offering from Fisher Controls in Europe. Design V00 Steel and CG8M (37 Stainless Steel) Valves: Consistent with applicable pressuretemperature ratings in table per ASME B6.34, but do not exceed the material temperature capabilities shown below and the pressure drop limitations. CWM (Hastelloy C) Valves: Consistent with applicable pressure-temperature ratings shown in table 6, but do not exceed the material temperature capabilities shown below and the pressure drop limitations. Shutoff Classification () Fisher TCM Plus Ball Seal (Forward Flow): Class VI per ANSI/FCI 70- and per IEC 60-534-4, Amendment Flat Metal Ball Seal for 3 through -inch valves only (Forward Flow): Class IV per ANSI/FCI 70- and per IEC 60-534-4, Amendment HD (Heavy Duty) Metal Ball Seal (Bidirectional Flow): 0.0% of valve capacity; Max. reverse flow shutoff is 00 psi; Class IV per ANSI/FCI 70- and per IEC 60-534-4, Amendment Flow Ring Construction (Bidirectional Flow): 5% of valve capacity at full travel Construction Materials See tables 3, 4 and 5 Temperature Capabilities (,) Fisher TCM Plus Seals: -46 to 3 C (-50 to 450 F) HD Metal Seals: -46 to 88 C (-50 to 550 F), special design available to 47 C (800 F) Ceramic Micro-Notch Ball: -46 to 93 C (-50 to 00 F) (4) Flat Metal Seals (for 3 through valves only) with PTFE Packing: -46 to 3 C (-50 to 450 F) Flow Ring or Flat Metal Seal with Graphite Ribbon Packing: -98 to 47 C (-35 to 800 F) PEEK/PTFE Bearings: -46 to 60 C (-50 to 500 F) Flow Characteristic Modified equal percentage Dimensions See figures 5, 6, and 7 for dimensions Optional Face-to-Face Dimensions ASME B6.0 short face-to-face dimensions are available as an option for - through -inch valves. Note that ASME B6.0 short dimensions are actually longer than ISA S75.04. See figure 8 for dimensions. Maximum Shutoff Pressure/Temperature Ratings () Fisher TCM Plus, Flat Metal (3 through -inch valves only), HD Metal Ball Seals and Flow Ring: See table 9. For CWM valves, see table 7. - Continued - Standard Flow Direction Forward (into the convex face of the V-notch ball) Flow Coefficients See Catalog
Specifications (Continued) Flow Coefficient Ratio (3) See Catalog Noise Levels See Catalog closes valve) and push-down-to-open (extending actuator rod opens valve) Approximate Weight See table Maximum Ball Rotation 90 degrees Actuator Mounting Standard valve construction is for right-hand mounting, as viewed from upstream end of valve. Lefthand (optional) mounting is available upon request. Valve/Actuator Action With diaphragm or piston rotary actuator, the valve is field-reversible between PDTC or PDTO: push-down-to-close (extending actuator rod. The pressure/temperature limits in this bulletin, and any applicable code or standard limitation, should not be exceeded.. Additional limits are shown in tables 6 through. 3. Ratio of maximum flow coefficients to minimum usable flow coefficient can also be called rangeability. 4. For the CG8M and alloy 6 Micro-Notch constructions, pressure and temperature capabilities are the same as for standard constructions. Options Pipe plug at end of follower shaft for all sizes, Line flange bolting, Materials that comply with National Association of Corrosion Engineers (NACE) standard MR075 for sour-gas service (see table 4), Alloy construction materials, ENVIRO-SEAL packing system for through 0-inch valves: See figure 4 and Bulletin 59.3:04, ENVIRO-SEAL Packing Systems for Rotary-Shaft Valves for more information, Micro-Notch construction for -inch valves (see Micro-Notch Construction section), Avesta (CK3MCUN) trim material Features (Continued) Excellent Flow Control Precise contouring of the Vee-Ball provides a modified equal percentage flow characteristic. For very precise control of low flow rates, the Micro-Notch option is available on the -inch size valve. See the Micro-Notch Construction section of this bulletin for more information. Sour Gas Service Capability Optional trim and bolting materials are available for applications handling sour fluids and gases. These constructions comply with the recommendations of the National Association of Corrosion Engineers (NACE) MRO75. Because of the care exercised by Fisher Controls in procurement and manufacturing, additional testing and documentation to assure compliance with the NACE standard is not required in most cases. Quick and Easy Maintenance Ball seal inspection and replacement is done at the valve body inlet without removing the actuator or disassembling the valve. Valve maintenance requires no special tools. Structural Integrity One-piece valve body improves structural integrity of the pressure boundary by eliminating leak paths that could be caused by the gaskets in two-piece, bolted valve designs. Excellent Environmental Capabilities The optional ENVIRO-SEAL packing systems are designed with very smooth shaft surfaces and live loading to provide excellent sealing. The superior seal of the EN- VIRO-SEAL system can restrict emissions to less than the EPA (Environmental Protection Agency) limit of 500 ppm (parts per million). Series B The 3 through -inch sizes have been changed to reduce parts and to improve control performance. The V-notch Ball now resembles the 4 through 0-inch size V-notch Ball. The pressed-in bushings have been eliminated, as well as the thrust washer. For further information, please refer to Type Vee-Ball Designs V50, V00 and V300 Rotary Control Valves Sizes - through -inch instruction manual. 3
Table. Valve Body Materials, End Connections, and Ratings VALVE DESIGN V50 V00 V300 VALVE BODY SIZE RATINGS SIZE RATINGS MATERIAL Inch ANSI DIN PN CF3M, -/, /,, 3, 4, 6, 8, 0, Class 50 - - - - DIN STL.069, DIN DN 5, 40, 50, 80, - - - - PN 0/6 SST.458, or DIN 00, 50, 00, 50 SST.4408 () - - - - DN 300 PN 6, /,, 3, 4, 6, 8, 0 Class 50 DN 5, 40, 50, 80, 00, 50, 00, 50 PN 0/6 WCC or CWM (), 6, 0 Class 50 DN 300 PN 6 4 Class 50 - - - - CG8M CK3MCUN (Avesta), -/,, 3, 4, 6, 8, 0, & 4, -/,, 3, 4, 6, 8, 0 & Class 50 - - - - Class 50 - - - - CF3M, -/, Class 50/300/600 raised-face - - - - 3, 4 Class 50 and Class 300/600 raised-face - - - - WCC, CG8M, or CWM () Class 50/300 6, 8 & 600 - - - - raised-face 0 Class 50 raised-face - - - - M35- (Monel), -/,, 3, 4, 6 & 8 Class 50, 300 & 600 - - - - CK3MCUN (Avesta) CF3M, -/,, 3, 4, 6, 8 Class 50, 300 & 600 - - - - 0 & Class 50 & 300 - - - -, -/,, 3, 4, 6, 8, 0, & WCC or, -/,, 3, 4, 6, 8, CWM () 0,, 4, & 6 DIN STL.069, DIN SST.458, or DIN - - - - SST.4408 () CG8M, -/,, 3, 4, 6, 8, 0,, 4 & 6 Class 300 - - - - Class 300 - - - - DN 5, 40, 50, 80, & 00 PN 5/40 Class 300 - - - - M35- (Monel), -/,, 3, 4, 6 & 8 Class 300 - - - -. 6 WCC and DIN Stl.069 are dual certified. CF3M and DIN SST.4408 are dual certified.. Refer to table 7 for CWM ratings. Table. Valve Weights, Approximate Valve V50 V00 V300 Size, Inch kg lbs kg lbs kg lbs 5.6 3 4.5 0 8 7 -/ 8. 9 6.4 4 7 9. 0 3 7 38 3 3 43 5 34 8 6 4 6 57 48 37 8 6 4 93 36 80 60 33 8 7 58 6 36 03 6 0 07 35 4 5 00 440 57 347 93 645 4 47 545 374 85 6 333 735 50 5 0 54 55 4
V-NOTCH BALL SEE VIEW A SEAL PROTECTOR RING GASKET FOLLOWER SHAFT GROOVE PIN BODY BEARING TAPER KEY DRIVE SHAFT FOLLOWER W7435 / IL SEAL PROTECTOR RING BODY SEAL PROTECTOR RING HD SEAL FLAT METAL BALL SEAL SPRING SEAL RADIAL SEAL W473-3 / IL V-NOTCH BALL SHIMS BODY V-NOTCH BALL WAVE SPRING W5704- / IL SEAL PROTECTOR RING TCM BALL SEAL V-NOTCH BALL BODY W697- / IL BACKUP RING Figure. Vee-Ball Construction Features (Design V50 Shown) 5
HD METAL BALL SEAL BOTTOM FLANGE FLANGE AND FOLLOWER PIN W6099- / IL Figure. Vee-Ball Construction Features (Design V50 Shown)(Continued) Micro-Notch Construction For very precise control of low flow rates (C v of 8.4 or less), the Micro-Notch construction (see figure 3) is available on -inch valves. Three Micro-Notch ball materials are available: chrome-plated CG8M (37 stainless steel), solid alloy 6, and solid VTC ceramic. A VTC ceramic HD seal is standard with the VTC ceramic ball. For the CG8M and alloy 6 constructions, pressure and temperature capabilities are the same as for standard constructions. For the ceramic construction, maximum temperature is 93 C (00 F). MICRO- NOTCH W656 / IL Figure 3. Typical Micro-Notch Ball and Shaft VEE BALL DRIVE SHAFT 6
Table 3. Standard Construction Materials for through -Inch Valves PART MATERIAL Valve Body & Seal Protector Ring or Flow Ring WCC steel (NACE), WCC steel (DIN.069), CG8M (37 SST, NACE), CF3M () (36L SST DIN.4408 or optional DIN.458), CWM (Hastelloy C) (CWM valve available with Fisher TCM Plus seal only), M35- (Monel) or CK3MCuN (Avesta) Backup Ring (, -/ and -inch only) CG8M (NACE), CF3M () (NACE) or CWM V-Notch Ball CG8M (NACE), CF3M, CWM, chromium-plated CF3M, chromium-plated CG8M(NACE) and chromium-plated CG8M/ CF3M with alloy6 notch (NACE), M35- (Monel) or CK3MCuN (Avesta) Seal Fisher TCM Fisher TCM Plus and Fisher TCM Ultra Flat Metal Seal, Shims, and Spring Seal Spring Tempered S3600 (36 stainless steel) or Spring TemperedS3000 (30 stainless steel) for -inch valves only HD (Heavy-Duty) Metal CF0SMnN () (Nitronic 60), CD7MCuN (3) (alloy 55 duplex stainless steel) or R30006 (Alloy 6, NACE) Wave Spring (use with HD seal) N07750 (Inconel X750) HD Seal Radial Seal Graphite reinforced PTFE Bearings PEEK (4) /Carbon-filled liner (NACE), S3600L Nitride, R30006 (alloy 6, NACE), silver-plated R30006, carbon-filled PTFE with N076 (Hastelloy C) sleeve, or glass-filled PTFE with N076 sleeve Thrust Washer (, -/, and -inch only) S3600 or N076 (Hastelloy C) Seal Retainer Gasket Laminated graphite Packing PTFE V-ring with one carbon-filled PTFE ring (5), PTFE V-ring, or graphite ribbon. Packing is available with or without live loading. Shafts S090 (Nitronic 50, NACE), S7400 (7-4PH stainless steel), N076 (Hastelloy C76), M35- (Monel) or CK3MCuN (Avesta) Groove Pin S3600 (NACE) or N076 Taper Key R30006 (6), S090, or N076 Taper Pin (, -/, and -inch only) S090 (NACE) or N076 Pipe Plug (Optional) S3600 (NACE) N076, or S3603 (36L stainless steel, NACE) Seal Retainer Screws and Washers Stainless steel Packing Follower and Packing Box Ring CF8M (36 stainless steel, NACE), N076, S354 (Avesta), or N076 with separate S3600 packing box flange (NACE) Actuator Mounting Bolts and Nuts Grade 5 steel or strain-hardened B8M stainless steel Spacer and Bushing S3700 (NACE), N076, or S3603 Packing Follower Bolting and Optional Line Bolting SA-93-B7, SA-93-B7M, or strain-hardened SA-93-B8M. CF3M is available in all areas as a special order and is the standard material offered for Fisher Controls in Europe.. Recommended for lubricated and non-lubricated service and where corrosion properties similar to 304 stainless steel are acceptable. 3. Recommended for lubricated service and where corrosion properties equal to or better than 37 stainless steel are required. 4. PEEK is poly-ether-ether-ketone. 5. The carbon-filled PTFE ring is used for grounding. 6. Standard material offered in North America. 7
Table 4. Standard Construction Materials for 4, 6, and 0-Inch Valves Part Valve Body, Seal Protector Ring, and Flow Ring V-Notch Ball WCC steel or CG8M (37 stainless steel) Material Chromium-plated CG8M, CG8M, Chromium-plated CG8M with alloy 6 notch Fisher TCM Fisher TCM Plus and Fisher TCM Ultra Ball Seal CF0SMnN HD (Heavy-Duty Metal) (Nitronic 60), CD7MCuM () (alloy 5 duplex stainless steel) or R30006 (alloy 6) Wave Spring (use with HD seal) N07750 (Inconel X750) Radial Seal (use with HD seal) PTFE with N076 (Hastelloy 76C) spring Bearings PEEK/PTFE (3), S44004 (440C stainless steel use with S7400 [7-4PH stainless steel] shafts, alloy 6B, and silver plated alloy 6B Thrust Washer (use with metal bearings) Alloy 6B Seal Retainer Gasket Laminated Graphite Packing PTFE V-ring with one conductive V-ring(4), PTFE V-ring, or graphite ribbon Shafts S7400 (7-4 stainless steel) or S090 (Nitronic 50) Pins S090 Pipe Plug S3700 (37 stainless steel) Packing Follower Bolting B7M steel or strain-hardened B8M stainless steel Retainer Screw B8M stainless steel Packing Follower and Packing Box ring S3600 (36 stainless steel) Packing Flange Steel or S3600 Actuator Mounting Bolts and Nuts Grade 5 steel or strain-hardened B8M stainless steel Gasket (used with bottom flange) S3603 (36L stainless steel) spiral wound Stud and Hex Nut (used with bottom flange) B7 steel or strain-hardened B8M stainless steel. Recommended where corrosion properties similar to 304 stainless steel are acceptable.. Recommended for lubricated service and where corrosion properties equal to or better than S3700 stainless steel. 3. PEEK (Poly-ether-ether-ketone) w/ptfe liner. 4. A carbon-filled PTFE ring is used for grounding. BOX STUD SPRINGS VALVE SHAFT VALVE BODY ANTI EXTRUSION RINGS VALVE SHAFT FLANGE BOX RING FLANGE FOLLOWER PTFE V RINGS SHOWN BOX RING W65 / IL SPRINGS FOLLOWER GRAPHITE SET W5806 / IL Figure 4. Typical ENVIRO-SEAL Packing Arrangements 8
Table 5. Construction Materials for Compliance with NACE MR075 Part Material Valve Body & Seal Protector Ring or Flow Ring WCC steel (), CG8M (37 stainless steel), CF3M () (36L stainless steel) or CWM (Hastelloy C), M35- (Monel) or 54SMO (Avesta) Backup Ring (, -/, and -inch) CG8M, CF3M () or CWM Chrome-plated CG8M, CWM, CF3M, chrome-plated CG8M with alloy 6 notch, V-Notch Ball chrome-plated CF3M, and chrome-plated CF3M with alloy 6 notch, M35- (Monel) or CK3MCuN (Avesta) Seal Fisher TCM Fisher TCM Plus and Fisher TCM Ultra HD (Heavy-Duty) Metal R30006 (alloy 6) HD Seal Wave Spring N07750 (Inconel X750) HD Seal Radial Seal PTFE Bearings PEEK/PTFE (3),36L Nitride, alloy 6B, silver-plated alloy 6B, carbon-filled PTFE with N076 sleeve, or glass-filled PTFE with N076 sleeve Thrust Washer (, -/, and -inch only) S3600 or N076 Seal Retainer Gasket Laminated graphite Packing PTFE V-ring with one carbon-filled PTFE conductive packing ring (4), or ENVIRO-SEAL packing Shafts S090 (Nitronic 50), N076, M35- (Monel) or S354 (Avesta) Groove Pin (- through -inch only) S3600 (36 stainless steel) Taper Key (- through -inch) or Pins (4- through 0-inch) (- through -inch) R30006, (4- through 0-inch) S090 Taper Pin (, -/, and -inch) S090 Pipe Plug (optional through -inch) S3700 (37 stainless steel) 4, 6 & 0-inch, S3600 (36 stainless steel - through -inch) Seal Retainer Screws and Clips Stainless steel Packing Follower and Packing Box Ring CF8M (36 stainless steel) or S354 (Avesta) Spacer and Bushing (3- through -inch sizes) S3700 Packing Follower Bolting and Optional Line Bolting Grade B7 or B7M steel studs, H, HM, or B8M nuts. Includes stress relief of body, seal protector ring or flow ring.. CF3M is available in all areas and is the standard material offering from Fisher Controls in Europe (not available for 4- through 0-inch sizes). 3. PEEK (Poly-ether-ether-ketone) w/ptfe liner. 4. Carbon-filled PTFE ring is used for grounding. Table 6. Maximum Allowable Inlet Pressure for CWM (Hastelloy C) and CG8M (37 Stainless Steel) Valves, Class 50 () TEMPERATURE CWM CG8M TEMPERATURE CWM CG8M C Bar F Psig Psig 9 to 38 93 49 04 3 60 36 343 37 399 47 0.0 7.9 5.9 3.8.8 9.0 6. 4.8 3.4.6.7 9.6 8.6 7.6 6.5 5.5 0 to 00 00 300 400 450 500 600 650 700 750 800. These materials are not listed in ASME/ANSI B6.34. The designation 50 is used only to indicate relative pressure-retaining capabilities and is not an ANSI pressure-temperature rating class designation. 90 60 30 00 85 75 35 5 95 83 70 40 5 0 95 80 9
Pressure Drops Pressure drop limits of any given valve are based on valve body, and trim material limits. To find the appropriate pressure drop limitation, choose the desired valve size and temperature range. Then search tables 7 and 8 for body limitations and 9 for trim limitations. Information on limits for Avesta, Monel and other alloy constructions can be found in PS Sheet 59.:0 (C). The tables for both trim and body limits must be consulted. The lowest number from the tables is the appropriate limit. Table 7. Maximum Allowable Shutoff Pressure Drops (Body ratings) for CWM (Hastelloy C) Valves The tables for both trim and body limits must be consulted TEMPERATURE VALVE SIZE, INCHES RANGE CL 50 CL 300 CL 600 C Bar 46 to 38 93 49 04 3 F 50 to 00 00 300 400 450 0.0 7.9 5.9 3.8.8 90 60 30 00 85 5.7 5.7 50.3 48.6 47. Psi 750 750 730 705 685 03 03 00 97. 94.5 500 500 455 40 370 Table 8. Maximum. Allowable Shutoff Pressure Drops () (Body Ratings) based on Carbon Steel and Stainless Steel Valve Body Types. The tables for both trim and body limits must be consulted. TEMPERATURE RANGE C WCC CL 50 36L SST CL 50 37 SST CL 50 WCC CL 300 ANSI PRESSURE CLASS 36L SST CL 300 37 SST CL 300 WCC CL 600 36L SST CL 600 46 to 9 5.9 9.0 4.4 49.6 8.7 99.3-9 to 38 0.0 5.9 9.0 5.7 4.4 49.6 03 8.7 99.3 93 7.9 3.4 6. 5.7 34.8 4.7 03 70.0 85.5 49 5.9. 4.8 50.3 3.4 38.6 00 6.7 77. 04 3.8.0 3.4 48.6 8.6 35.5 97. 56.9 70.6 3.8 0.7.8 47. 7.9 34.5 94.5 54.8 68.6 60.7 0.0.7 45.9 6. 33. 9.7 5.7 65.8 36 0.7 9.9 0.7 43.8 5.5 3. 87.6 5.0 64. 343 9.65 9.7 8.6 4.7 3.8 3.0 83.4 49.6 6.4 37 8.6 8.6 7.58 40.7 3.8 30.7 8.0 48.3 60.0 399 6.55 6.6 6.55 34.8 3. 9.3 69.6 46. 58.9 47 5.5 5.5 5.5 8.3.8 9.0 56.9 45.5 58.3 F 50 to 0 30 75 600 70 00 440 0 to 00 90 30 75 750 600 70 500 00 440 00 60 95 35 750 505 60 500 05 40 300 30 75 5 730 455 560 455 90 0 400 00 60 95 705 45 55 40 85 05 450 85 55 85 685 405 500 370 795 995 500 70 45 70 665 380 480 330 765 955 550 55 43 55 635 370 465 70 740 930 600 40 40 40 605 360 450 0 70 905 650 5 5 5 590 350 445 75 700 890 700 0 0 0 570 345 430 35 685 870 750 95 95 95 505 335 45 00 670 855 800 80 80 80 40 330 40 85 660 845 Bar Psi 37 SST CL 600 0
PEEK/PTFE -46 to 38 5.0 5.0 5.0 5.0 5.0 5.0 5.0 40. 37.6 3.0 3.8 3.0 93 37.9 37.9 37.9 37.9 37.9 37.9 37.9 37.9 37.6 3.0 3.8 3.0 Fisher TCM Plus 49 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 3.8 4. 04 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 3 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 HD Metal () -46 to 60 5.0 5.0 5.0 5.0 5.0 5.0 5.0 40.9 38. 40.3 6.5 40.3 Flat Metal -73 to 60 0.7 0.7 0.7 0.7 0.3 0.3 Flow Ring 60 99.3 99.3 99.3 99.3 7.4 75. 73.8 40.5 37.7 40.5 35.0 44.7 HD Metal () -46 to 88 5.0 50.0 5.7 7.5.0 0.9. 6.4 5.7 6.4 7.5 6.83 R30006 Flat Metal -73 to 47 7.0 0. 0.7 0.6 5.86 5.5 Flow Ring 47 74.5 49.6 6.8 8.8 0.9.. 6.07 5.65 6.07 7.3 6.69 R30006 Silver Plated S3600L Nitride BEARING MATERIAL PEEK/PTFE HD Metal () -46 to 88 5.0 5.0 5.0 35.0..8.5.3.4.3 3. 3.7 Flat Metal -73 to 47 0.7 0. 0.7 0.7 0.3 0.3 Flow Ring 47 99.3 99.3 53.5 37.6.8.5...3. 4.6 3.4 HD Metal () -46 to 88 5.0 36.7 36.3 37.4 0.5 9. Flat Metal -73 to 47 0.7 0.7 0.7 0.7 0.3 0.3 Table 9. Maximum Allowable Shutoff Pressure Drops based on Trim (Bearing and Seal) Note: Do not exceed the DIN or ANSI pressure / temperature rating of the valve or mating flanges. TEMPER- VALVE SIZE, INCHES BEARING BALL SEAL ATURE -/ 3 4 6 8 0 MATERIAL RANGE, C Bar 4 6 (4) 0 Flow Ring 47 6.7 36.3 37.4 37.0 0. 8.8 TEMPER- BALL SEAL ATURE Psi RANGE, F -50 to 00 740 740 740 740 740 740 740 583 545 450 345 450 00 550 550 550 550 550 550 550 550 545 450 345 450 Fisher TCM Plus 300 350 350 350 350 350 350 350 350 350 350 345 350 400 50 50 50 50 50 50 50 50 50 50 50 50 450 50 50 50 50 50 50 50 50 50 50 50 50 HD Metal () -50 to 500 740 740 740 740 740 740 740 593 553 450 384 444 Flat Metal -00 to 500 300 300 300 300 50 50 Flow Ring 500 440 440 440 440 050 090 070 587 547 587 508 648 HD Metal () -50 to 550 740 75 373 54 60 58 63 89 83 89 09 99 R30006 Flat Metal -00 to 800 46 46 55 54 85 80 Flow Ring 800 080 70 388 73 58 63 6 88 8 88 06 97 R30006 Silver Plated S3600L Nitride HD Metal () -50 to 550 740 740 740 508 30 36 36 78 66 78 9 98 Flat Metal -00 to 800 300 9 300 300 50 50 Flow Ring 800 440 440 776 546 36 36 3 76 64 76 94 HD Metal () -50 to 550 740 533 57 543 97 77 Flat Metal -00 to 800 300 300 300 300 50 50 Flow Ring 800 90 57 543 537 93 73. Pressure drops shown for HD metal seals are for forward flow only. For reverse flow with HD metal seal, limit pressure drop to 00 psig (6.9 bar).
DESIGN V50 DIMENSIONS (ISA S75.04) () VALVE SIZE A B D G K M (3) N (3) S Diameter DN mm 5 40 50 80 00 50 00 50 300 Inch -/ 3 4 6 8 0 4 (3) 6 (3) 0 0 4 4 65 94 9 43 97 338 4.00 4.50 4.88 6.50 7.6 9.00 9.56.69 3.3 5.00 6.00 0.00 46 5 59 87 9 9 9 5 64.80.04.5 3.44 3.6 4.69 4.69 5.94 6.44 6.88 7.00 9.5 85 85 88 4 4 4 08 08 08 7.38 7.38 7.38 8.44 8.44 8.44 8.9 8.9 8.9 4.00 4.00 4.00 83 90 87 00 33 5 84 68 3.9 3.38 4.9 4.6 5.5 5.94 7.69 8.75 0.56.6 3.00 6.00 95 7 30 4 64 3 60 303 3.75 4.75 5.00 5. 5.56 6.44 9. 0.5.94 3.50 4.38 8.00 78 90 04 04 7 4 3 45 5 Inch 3.06 3.56 4. 4. 4.6 4.90 5.5 5.69 5.94 6.00 6.00 7.00 7 78 9 98 98 4 3 3.8 3.06 3.6 3.86 3.86 4.40 4.90 5.9 5.9 5.5 5.5 6.5 3 5.9 & 5.9 x.7 5.9 & 5.9 x.7 9. 9. 5.4 3.8 3.8 38. / 5/8 & 5/8 x / 5/8 & 5/8 x / 3/4 3/4 -/4 -/4 -/ -3/4 -/8 -/. Inlet flange stud bolt length is longer than the standard length specified in ANSI B6.5. See dimension M below. 3. 4- and 6-inch valves are available in ASME B6.0 short, only. See dimension A for ASME B6.0 short shown below in figure 0. 3. Clearance necessary to remove flange bolts. T U W 7 7 7 5 5 5 35 35 35 4.6 4.6 4.6 6.00 6.00 6.00 9.5 9.5 9.5 0.75 0.75 3.5 3.8 3.8 3.8 46.0 46.0 46.0.5.5.5.8.8.8.00.00 3.00 4. 4. 4. 4. 4. 7.5 7.5 7.5 7.5 0.56 0.56 0.56 0.56 0.56 0.69 0.69 0.69 0.69 0.75 0.75 0.88 MATCHES ANSI CLASS 50 RF FLANGES OR DIN 0 & 6 S DIA T T U W W N A B M G K D SIZE THRU SIZE 3 THRU 0 B65-K B53-5 / IL Figure 5. Design V50 Dimensions
VALVE SIZE, INCH / 3 4 6 A B D G K Class 50 DESIGN V00 DIMENSIONS (ISA S75.04) M Class 300 Class 600 mm 0 4 36 86 343 43 0 4 4 56 6 67 88 8 89 06 95 7 76 89 0 4 7 5 73 9 0 9 37 65 79 7 30 54 79 7 67 94 0 4 33 4 86 4 57 97 9 09 59 64 () 343 7 6 60 8 43 4 95 3 343 387 46 70 34 0 97 47 08 60 49 34 368 / 3 4 6 4.00 4.50 4.88 6.50 7.6 9.00..46.63 3.0 3.99 4.9 7.38 8.44 3.9 3.50 4.9 4.6 5.5 6.5 3.75 4.75 5.00 5. 5.56 6.44 ( ) 6.94 7.44 8.3 0.00.5 3.50 7.94 8.8 9.3.00.00 4.5 Inch 7.94 8.8 9.3.5 3.50 6.5 R.88 3.63 5.00 6.9 8.50 R 4.00 4.68 5.38 6.56 7.76 0.4 8 9.56 4.88 7.69 9. 3.50 5.5 6.75 0.63.38 0.69 5.77 8.9 8.75 0.5 6.50.75 4.50. 7.06 inches (79 mm) for 6 inch, ANSI Class 600 valves only. S Shaft Diameter.7 5.7 & 5.7 x.7 5.7 & 5.7 x.7 9. 9. 5.4 T U W 77 5 3 ANSI B6.5 RF FLA- NGES ANSI Class 4. 50, 300, and 600 3.8 35 46 7.5 Class 50 / 5/8 & 5/8 x / 5/8 & 5/8 x / 3/4 3/4 4.6 6.00.5 0.56 ANSI Class 50 and 300 -/4 9.5.8 0.69 Class 50 A B G K D R U R S T T W W SIZE THRU SIZE 3 THRU 0 B3060-L B33- / IL M B65-K / DOC Figure 6. V00 Dimensions 3
DESIGN V300 DIMENSIONS (ISA S75.04) VALVE SIZE, A B D G K M () N () S Diameter DN () mm 5 40 50 80 00 50 00 50 300 356 mm (4-in.) 406 mm (6-in.) Inch -/ 3 4 6 8 0 4 6 0 4 4 65 94 9 43 97 338 46 5 57 87 9 9 9 5 64 87 89 88 4 4 4 08 08 08 8 89 06 7 33 9 95 68 95 7 30 4 64 3 60 303 98 04 3 37 50 64 84 97 85 99 98 8 4 37 5 7 84 3 6 & 6 X 3 6 & 6 X 3 9 9 5 3 3 38 T U W 7 5 3 4. 35 46 7.5 38 75 356 95 343 97 78 44.5 73 50.8 9.5 406 78 356 338 356 0 9 53.8 73 50.8 9.5 4.00 4.50 4.88 6.50 7.6 9.00 9.56.69 3.3 5.00 6.00.80.04.5 3.44 3.6 4.69 4.69 5.94 6.44 6.88 7.00 7.38 7.38 7.38 8.44 8.44 8.44 8.9 8.9 8.9 4.00 4.00 3.9 3.50 3.9 4.6 5.5 6.5 7.69 8.75 0.56.6 3.3 3.75 4.75 5.00 5. 5.56 6.44 9. 0.5.94 3.50 4.38. DN5, 40, 50, 80, and 00 are the only sizes offered in Design V300 for Europe.. Clearance necessary to remove flange bolts. Inch 3.86 4.40 4. 5.5 5.40 5.90 6.44 7.5 7.75 7.75 8.5 3.36 3.90 3.86 4.65 4.90 5.40 5.94 6.75 7.5 7.00 7.50 / 5/8 & 5/8 X / 5/8 & 5/8 X / 3/4 3/4 -/4./4 -/ -3/4 -/8 4.6 6.00.5 056 0.56 9.5.8 0.69 0.75.00 0.75 MATCHES ANSI CLASS 300 RF OR PN 5, 40 FLANGES U S T T W W B330-3 / IL N A B M G K D Figure 7. Design V300 Dimensions 4
DESIGN V50 AND V300 VALVE A M N SIZE, INCH mm Inches mm Inches mm Inches -/ 3 4 6 8 0 7 65 78 03 9 67 9 330 356 5.00 6.50 7.00 8.00 9.00 0.50.50 3.00 4.00 03 35 55 4 55 63 8 76 70 4.06 5.3 6. 5.6 6. 6.40 7.5 6.94 6.69 7 78 9 98 98 4 3 3.8 3.06 3.6 3.86 3.86 4.40 4.90 5.9 5.9 NOTES: - THROUGH -INCH VALVES ARE AVAILABLE WITH EITHER ISA S75.04 FACE- TO-FACE DIMENSIONS OR ASME B6.0 SHORT FACE-TO-FACE DIMENSIONS. -THROUGH -INCH VALVES WILL BE SUPPLIED IN ISA S75.04 UNLESS YOU SPECIFY OTHERWISE. NOTE THAT ASME B6.0 SHORT DIMENSIONS ARE ACTUALLY LONGER THAN ISA S75.04. N 4B6907 / DOC A M 4- AND 6-INCH VALVES ARE AVAILABLE ONLY WITH ASME B6.0 SHORT FACE- TO-FACE DIMENSIONS. 0-INCH VALVES ARE AVAILABLE ONLY WITH A 508 MM (0-INCH) FACE-TO-FACE DIMENSION. M AND N DIMENSIONS SHOWN FOR DESIGNS V50 AND V300 ARE CLEARANCE NECESSARY TO REMOVE FLANGE BOLTS. DESIGN V00 OPTIONAL DIMENSIONS (ASME B6.0 SHORT) (,) VALVE SIZE, INCH -/ 3 4 6 8 0 -/ 3 4 6 8 0 A mm 7 65 7.00 03 9 67 9 330 Inch 5.00 6.50 7.00 8.00 9.00 0.50.50 3.00 M 0 40 68 86 3 38 394 45 7.94 9.44 0.56.5.6 5.00 5.50 7.75. Available for Class 50 valves only.. ASME B6.0 short dimensions are actually longer than ISA S75.04 dimensions. B3060-B A6530 / IL N B65-D B44- / IL A A M M Figure 8. Design V50, V00 and V300 Optional Dimensions 5
ENVIRO-SEAL, Micro-Notch, Vee-Ball, Fisher TCM Plus, Fisher, Fisher-Rosemount, and Managing The Process Better are marks owned by Fisher Controls International, Inc. or Fisher- Rosemount Systems, Inc.All other marks are the property of their respective owners. This product may be covered by one or more of the following patents: 5,3,666; 5,056,757; 5,30,498; and 5,99,8, or under pending patents. Fisher Controls International, Inc. 990, 000; All Rights Reserved For information, contact Fisher Controls: Marshalltown, Iowa 5058 USA Cernay 68700 France Sao Paulo 0544 Brazil Singapore 846 6 Printed in U.S.A.