TM ORIGINAL EQUIPMENT MANUFACTURER COOLANT TECHNOLOGY www.recochem.com Montréal Toronto Edmonton Vancouver
Turbo Power and OEM Antifreeze/Coolants Recochem formulates and produces antifreeze/coolants for every application From regular passenger vehicles to the most sophisticated commercial and heavy duty transport equipment; from basic coolant formulations for the everyday drive to complex formulations that go the extra mile in engine protection we have the solutions. Our highly specialized coolant laboratory in Edmonton Alberta is devoted to the development and testing of innovative automotive coolants technology. This includes ASTM-approved state-of-the-art equipment, analysis, performance testing, expert product development and technical support for automotive engine coolants worldwide. Recochem s superior quality ethylene glycol based coolants are excellent for protecting coolant system metals, including heat-rejecting aluminum, against pitting caused by cavitation and corrosion. With exceptional cooling in summer and excellent protection against freezing in the winter, we develop, package and deliver various coolant technologies to a global market. 0312 _TPOEMCAT_USA
TM ALL SEASON ANTIFREEZE/COOLANT Recommended for older model domestic and foreign cars and light duty trucks Provides up to 50,000 miles or 2 years service life* Low silicate and aluminum compatible Protects against winter freezing and summer boil-over Prevents pitting caused by cavitation and corrosion of brass, copper, solder, steel, cast iron and aluminum Available as a CONCENTRATE or 50/50 PRE-DILUTED ITEM# FORMULATION SIZE CASE PACK UPC SCC 86-244PRO ($2 rebate) Concentrate 1 Gallon 4 056438762447 40056438762445 86-424PRO ($2 rebate) Pre-diluted 1 Gallon 4 056438864240 40056438764241 86-249 Concentrate 55 Gallons NA NA NA 86-429 Pre-diluted 55 Gallons NA NA NA 86-249-1000 Concentrate 264 Gallons NA NA NA 86-429-1000 Pre-diluted 264 Gallons NA NA NA Recochem Inc. www.recochem.com Montréal Toronto Edmonton Vancouver 3
Turbo Power All Season Antifreeze/Coolant is a superior quality ethylene glycol based engine coolant with a low silicate corrosion inhibitor package. This product protects coolant system metals, including heat-rejecting aluminum, against pitting caused by cavitation and corrosion. It provides exceptional cooling in summer and excellent protection against freezing in the winter. * It is recommended for use in older model domestic and foreign cars and light duty trucks and will provide up to 50,000 miles or 2 years service life when installed as initial fill, or after a complete flush and cleaning of a cooling system in reasonable condition. It is compatible with supplemental coolant additives (SCA) and coolant filters and thus can be used in heavy duty diesel coolant systems when pre-charged with SCA. Coolant concentrate must be diluted with water prior to use. Turbo Power All Season Antifreeze/Coolant should not be used in concentrated form. A 50% dilution is generally recommended for the best balance of protection against freezing, corrosion and summer boil-over. For increased freeze protection in extremely cold areas, a 60% volume concentration can be used. Concentrations of greater than 70% by volume are not recommended. High quality soft, de-ionized or distilled water should always be used to dilute coolant concentrate. For added value and convenience, this product is available in a ready to use format, pre-diluted to 50% volume using de-ionized water. Chemical Name: Ethylene Glycol-based Engine Coolant Typical Product Properties: Characteristic Performance Test Method Meets the following specifications: ph (50% by vol.) 10 11 ASTM D1287 Specific gravity (15.6 C/60 F) 1.110 1.140 ASTM D1122 Freeze point (50% by vol.) -37 C/-34 F ASTM D1177 Foam volume (ml) 150 max. ASTM D1881 Foam break time (second) 5 max. ASTM D1881 Reserve Alkalinity (ml) 6.0 min. ASTM D1121 Chloride (ppm) 25 max. ASTM D3634 Silicon (ppm) 250 max. ASTM D6130 Color Green Glycol Content (wgt.%) 95 min. Inhibitors and Water Content (wgt.%) 5 max. ASTM D3306, D4985 GM 1825M, 1899M Chrysler MS7170 Ford ESE-M97B44-A TMC RP 302B NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information. Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner s manual and to follow engine manufacturer s instructions. 4
ORIGINAL EQUIPMENT MANUFACTURER GLOBAL EXTENDED LIFE ANTIFREEZE/COOLANT Recommended for use in ALL MAKES AND MODELS of foreign and domestic passenger vehicles and light duty trucks GUARANTEED UP TO: 5 years or 150,000 miles protection* Add as a top-up to any color antifreeze Protects all coolant system metals, including aluminum Available as a CONCENTRATE or 50/50 PRE-DILUTED ITEM# FORMULATION SIZE CASE PACK UPC SCC 86-104OEM Concentrate 1 Gallon 4 056438861041 40056438861049 86-114OEM Pre-diluted 1 Gallon 4 056438861140 40056438861148 86-109OEM Concentrate 55 Gallons NA NA NA 86-119OEM Pre-diluted 55 Gallons NA NA NA 86-109-1000 Concentrate 264 Gallons NA NA NA Recochem Inc. www.recochem.com Montréal Toronto Edmonton Vancouver 5
OEM Global Extended Life Antifreeze/Coolant is recommended for use in ALL MAKES AND MODELS of foreign and domestic passenger vehicles and light duty trucks. It contains a proprietary formulation of premium corrosion inhibitors that provide extended protection against rust, corrosion and pitting caused by cavitation for all coolant system metals. It also provides excellent protection against temperature extremes, preventing freeze-up and boil-over when used in accordance with OEM and product manufacturer s guidelines regarding product dilution. This product can be mixed with any color engine coolant. * When added to a coolant system after a complete drain, flush and fill, this product provides up to 5 years or 150,000 miles of protection. Coolant concentrate must be diluted with water prior to use. OEM Global Extended Life Antifreeze/Coolant should not be used in concentrated form. A 50% dilution is generally recommended for the best balance of protection against freezing, corrosion and summer boil-over. For increased freeze protection in extremely cold areas, a 60% volume concentration can be used. Concentrations of greater than 70% by volume are not recommended. High quality soft, de-ionized or distilled water should always be used to dilute coolant concentrate. For added value and convenience, this product is available in a ready to use format, pre-diluted to 50% volume using de-ionized water. ECONOMY: Save your customers money by reducing the number of times they need to change their coolant. The superior performance and stability of our premium extended life corrosion inhibitors allows them to go on working well beyond the lifetime of traditional products. EXTENDED PERFORMANCE: Our proprietary extended life engine coolant technology affords lasting corrosion protection and protects against pitting caused by cavitation to the ferrous and non-ferrous metals currently found in traditional and modern engine/ engine coolant system construction. When added to a coolant system after a complete drain, flush and fill, this product provides up to 5 years or 150,000 miles of protection. Chemical Name: Ethylene Glycol-based Engine Coolant Typical Product Properties: Characteristic Performance Test Method Meets the following specifications: ph (50% by vol.) 7.5 8.5 ASTM D1287 ASTM D3306, JIS K2234 Specific gravity (15.6 C/60 F) 1.120 1.140 ASTM D1122 Freeze point (50% by vol.) -37 C/ -34 F ASTM D1177 Foam volume (ml) 150 max. ASTM D1881 Foam break time (second) 5 max. ASTM D1881 Reserve Alkalinity (ml) 3.0 min. ASTM D1121 Chloride (ppm) 25 max. ASTM D3634 Color Pale Yellow Glycol Content (wgt.%) 93 min. Inhibitors and Water Content (wgt.%) 7 max. NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information. Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner s manual and to follow engine manufacturer s instructions. 6
TM EXTENDED LIFE ANTIFREEZE/COOLANT Can be used in GM Cars and Trucks requiring DEX-COOL GUARANTEED UP TO: 5 years or 150,000 miles protection* Amine, borate, nitrate, nitrite, phosphate and silicate free Compatible with other OEM and aftermarket OAT formulated long life coolants Available as a CONCENTRATE or 50/50 PRE-DILUTED Dex-Cool is a registered trademark of General Motors Corporation. ITEM# FORMULATION SIZE CASE PACK UPC SCC 86-374 Concentrate 1 Gallon 4 056438863748 40056438863746 86-384 Pre-diluted 1 Gallon 4 056438863847 40056438863845 86-379 Concentrate 55 Gallons NA NA NA 86-389 Pre-diluted 55 Gallons NA NA NA 86-379-1000 Concentrate 264 Gallons NA NA NA Recochem Inc. www.recochem.com Montréal Toronto Edmonton Vancouver 7
Turbo Power Extended Life Antifreeze/Coolant is a long service life product based on a proprietary organic acid technology (OAT). This ethylene glycol based product is free of silicates, phosphates, borates, nitrates, nitrites and amines. It protects coolant system metals against rust and corrosion and provides excellent high temperature aluminum protection. It is fully compatible with other similarly formulated OAT coolants and is recommended for use in newer model foreign and domestic cars and light duty trucks. * When properly diluted and added as an initial fill, this coolant provides up to 150,000 miles or 5 years service life protection in automotive applications. For best results, Turbo Power Extended Life Antifreeze/Coolant must not be mixed with conventional high ph, phosphate, borate or silicate containing coolants. This product has a distinctly orange color to help differentiate it from conventional engine coolant, which is typically, but not always, green. While deleterious effects are not expected to be significant, the mixing of conventional coolants with Turbo Power Extended Life Antifreeze/Coolant will result in a lower than expected lifetime (change-over intervals). Coolant concentrate must be diluted with water prior to use. Turbo Power Extended Life Antifreeze/Coolant should not be used in concentrated form. A 50% dilution is generally recommended for the best balance of protection against freezing, corrosion and summer boil-over. For increased freeze protection in extremely cold areas, a 60% volume concentration can be used. Concentrations of greater than 70% by volume are not recommended. High quality soft, de-ionized or distilled water should always be used to dilute coolant concentrate. For added value and convenience, this product is available in a ready to use format, pre-diluted to 50% volume using de-ionized water. ECONOMY: Save your customers money by reducing the number of times they need to change their coolant. The superior performance and stability of the premium extended life corrosion inhibitors allows them to go on working well beyond the lifetime of traditional products. EXTENDED PERFORMANCE: The extended life engine coolant technology affords lasting corrosion protection and protects against pitting caused by cavitation to the ferrous and non-ferrous metals currently found in traditional and modern engine/engine coolant system construction. When added to a coolant system after a complete drain, flush and fill, this product provides up to 5 years or 150,000 miles of protection. Chemical Name: Ethylene Glycol-based Engine Coolant Typical Product Properties: Characteristic Performance Test Method Meets the following specifications: ph (50% by vol.) 7.5 8.6 ASTM D1287 Specific gravity (15.6 C/60 F) 1.120 1.140 ASTM D1122 Freeze point (50% by vol.) -37 C/ -34 F ASTM D1177 Foam volume (ml) 150 max. ASTM D1881 Foam break time (second) 5 max. ASTM D1881 Reserve Alkalinity (ml) 3.5 min. ASTM D1121 Chloride (ppm) 25 max. ASTM D3634 Color Orange Glycol Content (wgt.%). 94 min. Inhibitors and Water Content (wgt.%) 6.0 max. ASTM D3306, GM 6277, JIS K2234; VW TL 774D; Ford WSS-M97B44-D NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information. Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner s manual and to follow engine manufacturer s instructions. 8
TM ANTIFREEZE/COOLANT Recommended for use in automotive and heavy duty applications, including truck, off-road, marine and farm engines Low silicate and phosphate free Prevents corrosion of brass, copper, solder, steel, cast iron and aluminum Available as a CONCENTRATE or 50/50 PRE-DILUTED Fully formulated; does not require intial charge of SCA ITEM# FORMULATION SIZE CASE PACK UPC SCC 86-284 Concentrate 1 Gallon 4 056438862840 40056438862848 86-289 Concentrate 55 Gallons NA NA NA 86-479 Pre-diluted 50-50 55 Gallons NA NA NA 86-489-40 Pre-diluted 60-40 55 Gallons NA NA NA 86-489-1000 Pre-diluted 60-40 264 Gallons NA NA NA Recochem Inc. www.recochem.com Montréal Toronto Edmonton Vancouver 9
Turbo Power Heavy Duty Antifreeze/Coolant is a superior fully formulated traditional engine coolant based on a proprietary formulation of corrosion inhibitors. The low silicate level of this aluminium compatible product allows it to be used in multi-vehicle fleets including automotive, light duty and heavy duty diesel applications such as on-road truck, off-road and farm applications. It is recommended for use where a heavy duty diesel coolant is required. This includes, but is not limited to, Caterpillar, Cummins, Detroit Diesel, Ford, GM and Volvo Mack. This product is phosphate and amine free and does not require an initial charge of supplemental coolant additives (SCA) upon initial fill. It is specially formulated to protect heavy duty diesel wet sleeve liners and is compatible with coolant filters, heavy duty diesel SCAs, hard water and other traditional fully formulated corrosion inhibited engine coolants. Turbo Power Heavy Duty Antifreeze/Coolant provides exceptional summer cooling and excellent protection against freezing in winter while protecting all common coolant system metals. Coolant concentrate must be diluted with water prior to use. Turbo Power Heavy Duty Antifreeze/Coolant should not be used in concentrated form. A 50% dilution is generally recommended for the best balance of protection against freezing, corrosion and summer boil-over. For increased freeze protection in extremely cold areas, a 60% volume concentration can be used. Concentrations of greater than 70% by volume are not recommended. High quality soft, de-ionized or distilled water should always be used to dilute coolant concentrate. For added value and convenience, this product is available in a ready to use format, pre-diluted to 50% volume using de-ionized water. Chemical Name: Ethylene Glycol-based Engine Coolant Typical Product Properties: Characteristic Performance Test Method Meets the following specifications: ph (50% by vol.) 10 11 ASTM D1287 Specific gravity (15.6 C/60 F) 1.110 1.140 ASTM D1122 Freeze point (50% by vol.) -37 C/-34 F ASTM D1177 Foam volume (ml) 150 max. ASTM D1881 Foam break time (second) 5 max. ASTM D1881 Reserve Alkalinity (ml) 10.0 min. ASTM D1121 Chloride (ppm) 25 max. ASTM D3634 Silicon (ppm) 250 max. ASTM D6130 Color Purple Glycol Content (wgt.%) 95 min. Inhibitors & Water Content (wgt.%) 5 max. ASTM D3306, D4985, D6210; Detroit Diesel 7SE298, 93K217; GM 1825M, 1899M; TMC RP 329B NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information. Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner s manual and to follow engine manufacturer s instructions. 10
TM HD DIESEL ELC ANTIFREEZE/COOLANT Recommended for use in light and heavy duty diesel applications where an extended service interval is required GUARANTEED UP TO: 6 years, 12,000 hours, or 600,000 miles* Fully formulated; does not require initial charge of SCA Low silicate, phosphate and amine free Available as a CONCENTRATE or 50/50 PRE-DILUTED ITEM# FORMULATION SIZE CASE PACK UPC SCC 86-734 Concentrate 1 Gallon 4 056438867340 40056438867348 86-834 Pre-diluted 1 Gallon 4 056438868347 40056438868345 86-739 Concentrate 55 Gallons NA NA NA 86-839 Pre-diluted 50-50 55 Gallons NA NA NA 86-739-1000 Concentrate 264 Gallons NA NA NA 86-869-40 Pre-diluted 60-40 55 Gallons NA NA NA 86-869-1000 Pre-diluted 60-40 264 Gallons NA NA NA Recochem Inc. www.recochem.com Montréal Toronto Edmonton Vancouver 11
Turbo Power Heavy Duty Diesel Extended Life Antifreeze/Coolant is a hybrid technology product that does not require an initial charge of SCA or coolant extender at initial fill. This OEM approved product is specially formulated to protect all coolant system metals and provides excellent wet sleeve liner cavitation protection. It is designed for use in light and heavy duty diesel applications where an extended service interval is required. It is recommended for use in on-road truck, off-road, farm, marine and stationary applications including, but not limited to, Caterpillar, Cummins, Detroit Diesel/MTU, GM Heavy Truck, Freightliner, PACCAR and Volvo Mack. * This aluminum compatible product, when added as an initial fill and properly maintained in accordance with engine manufacturer s maintenance recommendation, will provide an in-service life of up to 600,000 miles, 12,000 hours or 6 years, or whichever comes first. Coolant concentrate must be diluted with water prior to use. Turbo Power Heavy Duty Diesel Extended Life Antifreeze/Coolant should not be used in concentrated form. A 50% dilution is generally recommended for the best balance of protection against freezing, corrosion and summer boil-over. For increased freeze protection in extremely cold areas, a 60% volume concentration can be used. Concentrations of greater than 70% by volume are not recommended. High quality soft, de-ionized or distilled water should always be used to dilute coolant concentrate. For added value and convenience, this product is available in a ready to use format, pre-diluted to 50% volume using de-ionized water. EXTENDED PERFORMANCE: The extended life engine coolant technology affords lasting corrosion protection and protects against pitting caused by cavitation to the ferrous and non-ferrous metals currently found in traditional and modern engine/engine coolant system construction. When added to a coolant system after a complete drain, flush and fill, this product provides up to 6 years, 12,000 hours or 600,000 miles of protection. Chemical Name: Ethylene Glycol-based Engine Coolant Typical Product Properties: Characteristics Performance Test Method Meets the following specifications: ph (50% by vol.) 7.5 8.6 ASTM D1287 Specific gravity (15.6 C/60 F) 1.125 1.140 ASTM D1122 Freeze point (50% by vol.) -37 C/ -34 F ASTM D1177 Foam volume (ml) 150 max. ASTM D1881 Foam break time (second) 5 max. ASTM D1881 Reserve Alkalinity (ml) 6.0 min. ASTM D1121 Chloride (ppm) 25 max. ASTM D3634 Silicon (ppm) 250 max. ASTM D6130 Color Red Glycol Content (wgt.%). 94 min. Inhibitors and Water Content (wgt.%) 6.0 max. ASTM D3306, D4656, D5345 D6210; JIS K2334; TMC RP329; DETROIT DIESEL 7SE298, 93K217; CAT EC-1; CUMMINS CID-A-A-52624; MTU MTL 5048 NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information. Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner s manual and to follow engine manufacturer s instructions. 12
TM ANTIFREEZE/COOLANT Complete Mixed fleet use; heavy duty diesel, light truck and automotive Borate, nitrite, amine and phosphate free Compatible with ALL engine coolant technologies GUARANTEED UP TO: 5 years or 150,000 miles (automotive); 6 years or 600,000 miles protection (heavy duty diesel)* Available as a CONCENTRATE or 50/50 PRE-DILUTED ITEM# FORMULATION SIZE CASE PACK UPC SCC 86-314 Concentrate 1 Gallon 4 056438863144 40056438863142 86-324 Pre-diluted 1 Gallon 4 056438863243 40056438863241 86-319 Concentrate 55 Gallon NA NA NA 86-329 Pre-diluted 50-50 55 Gallon NA NA NA 86-319-1000 Concentrate 264 Gallon NA NA NA 86-329-1000 Pre-diluted 50-50 264 Gallon NA NA NA Recochem Inc. www.recochem.com Montréal Toronto Edmonton Vancouver 13
Turbo Power Heavy Duty Mixed Fleet Extended Life Antifreeze/Coolant is based on a proprietary Hybrid Organic Acid Technology (HOAT). It has been specifically designed for complete mixed fleet use and can be used in all makes and models of foreign and domestic passenger vehicles, light duty and heavy duty diesel applications. This low silicate, organic additive, ethylene glycol based, extended service product is free of phosphates, borates, nitrites and amines. It will provide extended protection against rust, corrosion and pitting caused by cavitation for all coolant system metals, including aluminum. It also provides protection against wet sleeve liner cavitation and is compatible with the flux found in controlled atmosphere brazed (CAB) radiators. In addition to normal product development testing, this product has been evaluated for chemical and performance compatibility with a wide range of different engine coolant technologies (including Asian, European and rth American) using ASTM D1384, D2809 and D4340. It offers excellent protection against temperature extremes, preventing freeze-up and boil-over when used in accordance with OEM and product manufacturer s guidelines regarding product dilution. This product does not impart any significant colour change if mixed with another engine coolant. The superior performance and stability of this product s premium extended life corrosion inhibitors allows them to go on working well beyond the lifetime of traditional products. *When Turbo Power Heavy Duty Mixed Fleet Extended Life Antifreeze/Coolant is added as an initial fill and properly maintained in accordance with engine manufacturer s maintenance recommendation, it will provide up to 150,000 miles or 5 years of service life protection in automotive application and up to 600,000 miles or 6 years of service life protection in heavy duty diesel use. Coolant concentrate must be diluted with water prior to use. Turbo Power Heavy Duty Mixed Fleet Extended Life Antifreeze/Coolant should not be used in concentrated form. A 50% dilution is generally recommended for the best balance of protection against freezing, corrosion and summer boil-over. For increased freeze protection in extremely cold areas, a 60% volume concentration can be used. Concentrations of greater than 70% by volume are not recommended. High quality soft, de-ionized or distilled water should always be used to dilute coolant concentrate. For added value and convenience, this product is available in a ready to use format, pre-diluted to 50% volume using de-ionized water. Chemical Name: Ethylene Glycol-based Engine Coolant Typical Product Properties: Characteristics Performance Test Method ph (50% by vol.) 8.0 9.0 ASTM D1287 Specific gravity (15.6 C.60 F) 1.120 1.140 ASTM D1122 Freeze point (50% by vol.) -37 C/ -34 F ASTM D1177 Foam volume (ml) 150 max. ASTM D1881 Foam break time (second) 5 max. ASTM D1881 Chloride (ppm) 25 max. ASTM D3634 Silicon, from silicate (ppm) 250 max ASTM D6130 Colour Pale Yellow Glycol Content (wgt.%). 93 min. Inhibitors and Water Content (wgt.%) 7 max. Meets the following specifications: ASTM D3306, D4985, D6210-10, D7583; AS. NZ 2108.1:1997 Type A; BS 6580; DDC 93K217; GM 1825M, 1899M; JIS K2234 Recommended for use in: Caterpillar; Chrysler MS7170 & MS9769; Cummins 14603; Ford ESE-M97B44A; WSS-M97B44D, WSS-M97B51-A1; Freightliner 48-22880; GM 6277M, GM Heavy Truck; International Truck & Engine CEMS B-1; Kenworth; MACK; PACCAR/DAF; VW TL 774G NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information. Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner s manual and to follow engine manufacturer s instructions. 14
ENGINE COOLANT SELECTION GUIDE Properties COOLANT GUIDE Product Name/ Product Code Application Aluminum compatibility Base fluid Product ph Product color All Season 86-244PRO Older model domestic and foreign cars and light duty trucks. Heavy Duty 1 86-284 Multi-vehicle fleets including automotive, light duty and heavy duty diesel applications such as on-road truck, off-road and farm applications. Recommended for use where a heavy duty diesel coolant is required, including, but not limited to Caterpillar, Cummins, Detroit Diesel, Ford, GM and Volvo Mack. Global Extended Life 1 86-104OEM All makes and models of domestic and foreign passenger vehicles and light duty trucks. Extended Life 1 86-374 Newer model domestic and foreign cars and light duty trucks. Heavy Duty Diesel Extended Life 1 86-734 Light and heavy duty diesel applications where an extended service interval is required. Recommended for use in on-road truck, off-road, farm, marine and stationary applications including, but not limited to, Caterpillar, Cummins, Detroit Diesel/MTU, GM Heavy Truck, Freightliner, PACCAR and Volvo Mack. yes yes yes yes yes yes Ethylene glycol Ethylene glycol Ethylene glycol Ethylene glycol Ethylene glycol Ethylene glycol 10-11 10-11 7.5-8.5 7.5-8.6 7.5-8.6 8.0 9.0 Green Purple Yellow Orange Red Pale Yellow HD Mixed Fleet Extended Life 86-314 Complete mixed fleet use; all makes, all models of foreign and domestic automotive, light truck and heavy duty diesel. Meets performance requirements of Available as a pre-diluted product Recommended change interval ASTM D3306 ASTM D4985 GM 1825M, 1899M Chrysler MS7170 Ford ESE-M97B44-A TMC RP 302B ASTM D3306 ASTM D4985 ASTM D6210 GM 1825M, 1899M TMC RP 329B Detroit Diesel 7SE298, 93K217 ASTM D3306 Japanese Standard JIS K2234 ASTM D3306 Japanese Standard JIS K2234 Ford WSS-M97B44-D GM 6277 VW TL 774D ASTM D3306, D5345, D4656, D6210, Japanese Standard JIS K2234, TMC RP329 Detroit Diesel 7SE298, 93K217 CAT EC-1 MTU MTL 5048 CID-A-A-52624 Cummins - 86-424PRO - 86-114OEM - 86-384 - 86-834 - 86-324 Up to 2 years or 50,000 miles Up to 5 years or 150,000 miles Up to 5 years or 150,000 miles Up to 6 years, 12,000 hours or 600,000 miles ASTM D3306, D4985, D6210-10, D7583; AS. NZ 2108.1:1997 Type A; BS 6580; Detroit Diesel 93K217; GM 1825M & 1899M; Japanese Standard K2234 Recommended for use in: Caterpillar; Chrysler MS7170 & MS9769; Cummins 14603; Ford ESE-M97B44A; WSS-M97B44D, WSS-M97B51-A1; Freightliner 48-22880, GM 6277M, GM Heavy Truck; International Truck & Engine CEMS B-1, Kenworth; MACK, PACCAR / DAF ; VW TL 774G Up to 5 years or 150,000 miles (automotive) Up to 6 years or 600,000 miles (heavy duty diesel) SCA or coolant extender SCA compatible for heavy duty applications. SCA compatible, monitor and add SCA only as required as per OEM instructions. Coolant extender compatible. SCA extender compatible, use only as required by OEM. Registered by Recochem Inc. All products available in 1 Gallon size. TM The information above includes recommendations for aftermarket coolants. Refer to owner s manual for suggested manufacturer s coolants and warrantee issues. ORIGINAL EQUIPMENT MANUFACTURER 1. A propylene glycol-based version of this product is available, based on demand.
RECOMMENDED PRODUCT APPLICATIONS ENGINE COOLANT SELECTION GUIDE Vehicle Manufacturer OEM Antifreeze Color All Season 86-244PRO Heavy Duty 1 86-284 Global Extended Life 1 86-104OEM Extended Life 1 86-374 Heavy Duty Diesel Extended Life 1 86-734 HD Mixed Fleet Extended Life 86-314 Asian OEM specific Chrysler 2001 and older Green Chrysler 2001 to present Orange European OEM specific Ford 2001 and older Green Ford 2002 trucks/ 2003 cars Gold Heavy Duty Diesel OEM specific General Motors 1994 and older Green General Motors 1995 to present Orange Saturn Orange Registered by Recochem Inc. All products available in 1 Gallon size. The information above includes recommendations for aftermarket coolants. Refer to owner s manual for suggested manufacturer s coolants and warrantee issues. 1. A propylene glycol-based version of this product is available, based on demand. TM ORIGINAL EQUIPMENT MANUFACTURER www.recochem.com Montréal Toronto Edmonton Vancouver