LIVE ON-SITE & AUCTION AUCTION: Tuesday, March 20, Beginning at 10:00am EDT LOCATION: 109 Sands Road, Reidsville, NC 27320 PREVIEW: Monday, March 19, 9:00am to 4:00pm or By Appointment Please Call 818.508.7034 for More Information COMPLETE BLOW MOLDING FACILITY! REAL ESTATE: 120,000 SQ. FT. ON 17.5 ACRES TO BE OFFERED IN BULK OR PIECEMEAL FEATURING: (7) Blow Molding Machines, Maguire, AEC & Conair Blenders, Rotogran, Rapid, Cumberland & CSC Tradate Granulators, Chillers, Air Dryers, Air Compressors, Rolling Stock, Vehicles & More 2000 2002 2002 Assets Formerly of: Cincinnati Milacron 75 Lb. Blow Molder Cincinnati Milacron 8 Lb. Dual Head Blow Molder Cincinnati Milacron 5 Lb. Dual Head Blow Molder 1 of 5 1 of 7 Maguire Gravimetric Blender AEC Silos REAL ESTATE: 120,000 Sq. Ft. on 17.5 Acres For Complete Photos & Lot Listings go to: www.maynards.com 818.508.7034 www.biditup.com 248.569.9781 www.maynards.com
BLOW MOLDING 2000 CINCINNATI MILACRON 75 LB. BLOW MOLDING MACHINE, Mdl. T2000V-150G-S75, Single Head, Shot Size: 75 Lb., Platen Size: 62 x 82, Max Daylight: 74, Clamp Force: 220-Ton, Screw Size: 6, CAMAC 486C Control, S/N B80A010007 2002 CINCINNATI MILACRON 8 LB. DUAL HEAD BLOW MOLDING MACHINE, Mdl. E90-D-S-8, Dual Head, Shot Size: 8 Lb. Each, Platen Size: 40 x 40, Center: 20, Max Daylight: 24 /49, Clamp Force: 50-Ton, Screw Size: 90mm, CAMAC 486 Control, S/N B72A0194008 2002 CINCINNATI MILACRON 5 LB. DUAL HEAD BLOW MOLDING MACHINE, Mdl. E90-D5-01.5, Dual Head, Shot Size: 5 Lb. Each, Platen Size: 40 x 37, Center 20, Max Daylight 15 /40, Clamp Force: 50-Ton, Clamp Stroke: 20, Screw Size: 90mm, CAMAC 486C Control, S/N B72A0100010 2000 1998 CINCINNATI MILACRON 5 LB. DUAL HEAD BLOW MOLDING MACHINE, Mdl. E90-D-5, Dual Head, Shot Size: 5 Lb. Each, Platen Size: 40 x 37, Center 20, Max Daylight 15 /40, Clamp Force: 50-Ton, Clamp Stroke: 20, Screw Size: 90mm, CAMAC 486 Control, S/N B72A0198003 1997 STERLING 50 LB. BLOW MOLDING MACHINE, Single Head, Shot Size: 50 Lb., Platen Size: 60 x 74, Max Daylight: 40 /82, Clamp Force: 180-Ton, Screw Size: 6, Barber Coleman Maco Compact Control, S/N 55816, Head rebuilt in 2015 1994 HARTIG 15 LB. BLOW MOLDING MACHINE, Single Head, Shot Size: 15 Lb., Platen Size: 40 x 40, Max Daylight: 27 /60, Screw Size: 4-1/2, Macro 6500 Control 1991 HARTIG 70 LB. BLOW MOLDING MACHINE, Single Head, Shot Size: 70 Lb. Inverted, Platen Size 48 x 72, Max Daylight: 16 /66, Screw Size: 4-1/2, Maco 8000 Control 2002 2002 Cincinnati Milacron 75 Lb. Blow Molding Machine 2002 Cincinnati Milacron 8 Lb. Dual Head Blow Molding Machine Cincinnati Milacron 5 Lb. Dual Head Blow Molding Machine Cincinnati Milacron 5 Lb. Dual Head Blow Molding Machine 1997 Sterling 50 Lb. Blow Molding Machine Hartig 15 Lb. Blow Molding Machine Hartig 70 Lb. Blow Molding Machine TO SCHEDULE AN AUCTION OR APPRAISAL CALL 818.508.7034
BLENDERS & GRANULATORS (2) MAGUIRE GRAVIMETRIC BLENDERS, Mdl WSB-440R, S/N 99221-10 and 99665-10 (5) MAGUIRE GRAVIMETRIC BLENDERS (2) WITTMANN BLENDERS 2004 ROTOGRAN GRANULATOR, Mdl. WO-3636-SP, 125HP, 36 x 36 Opening, S/N GM363SP0412105WO 2004 ROTOGRAN GRANULATOR, Mdl. WO-2236-SP, 75HP, 22 x 36 Opening, S/N GM2236SP0412144WO (3) RAPID GRANULATORS, Mdl. 1824-K, 18 x 24 Opening (3) RAPID GRANULATORS, Mdl. 1418-K, 14 x 18 Opening 1 of 2 1 of 5 1 of 2 Maguire Gravimetric Blender Maguire Gravimetric Blender Wittmann Blender 2004 RotoGran WO-3636-SP Granulator SUPPORT EQUIP. (8) AEC VACUUM PUMPS, Filter Chamber Mdl. VFCB1000, Power Unit Mdl. APD-15, 15HP (6) AEC MATERIAL HOPPERS (7) AEC SILOS 2013 DAKIN CHILLER, Mdl. AGZ160DHHNN-ER10, R410A Refrigerant Only, S/N STNU131100106 2001 ADVANTAGE CHILLER, Mdl. TTX-850-2P INGERSOLL RAND AIR COMPRESSOR, Mdl. SSR-E120 AIRTAK REFRIGERATED DRYER, Mdl. AC-800-A-SP, 5 HP, R-22 Refrigerant, S/N 07-04003 (2) AEC COOLING TOWERS, Mdl. FG-2015 1 of 3 1 of 3 RotoGran WO-2236-SP Granulator Rapid 1824-K Granulator Rapid 1418-K Granulator 8 Available 6 Available 7 Available AEC Vacuum Pumps AEC Material Hoppers AEC Silos 2013 1 of 2 Dakin Chiller Ingersoll Rand Air Compressor AirTak Refrigerated Dryer AEC Cooling Tower Register at www.biditup.com and receive auction updates via email
MISCELLANEOUS EQUIPMENT SELCO VERTICAL BALER, Mdl. V5-HD, S/N SA 09871813 (4) ACROMARK HOT STAMPING MACHINES 2007 ORION PALLET WRAPPING MACHINE, Mdl. Spectra LP, S/N 2007-0717818 LANTECH PALLET WRAPPING MACHINE, Q Series POWERMATIC DRILL PRESS, Mdl. 1200 DELTA DRILL PRESS, Mdl. DP 300L JET HORIZONTAL BANDSAW, On Wheels CHEMFREE PARTS WASHER, Mdl. 28-1 ROTARY CUTTERS (90) SECTIONS OF PALLET RACKING (4) AMETEK BATTERY CHARGERS, Mdl. E680-EC3-18SP 1 of 4 2007 ALSO INCLUDED: Spare Parts for Blow Molders, Label Printers (Zebra, Datamax and Intermac), Power Tools, Pneumatic Tools, Turboskill Torches, Scales, Calipers, Banding Carts, Shop Carts, Lyon Cabinets, Storage Cabinets, Flammable Cabinets, Office Furniture and Much More Selco Vertical Baler Acromark Hot Stamping Machine Orion Pallet Wrapping Machine Lantech Pallet Wrapping Machine Jet Horizontal Bandsaw View of Rotary Cutters (90) Sections of Pallet Racking 1 of 4 Ametek Battery Charger View of Spare Parts for Blow Molders View of Label Printers View of Power & Pneumatic Tools View of Scales View of Lyon Cabinets TO SCHEDULE AN AUCTION OR APPRAISAL CALL 818.508.7034
ROLLING STOCK & VEHICLES TOYOTA FORKLIFT, Mdl. 7FGU25, 5,400 Lb. Cap., Side Shift, 3-Stage Mast, LP Gas, S/N 63312 2007 FORD F-150 PICKUP TRUCK, 108,687 Miles, VIN: 1FTRF12W37KC86762 (3) 53 FRUEHAUF VAN TRAILERS GREAT DANE VAN TRAILER & 53 BUDD VAN TRAILER 1 of 3 2007 Toyota 7FGU25 Forklift Ford F-150 Pickup Truck 53 Fruehauf Van Trailer Great Dane Van Trailer THE FOLLOWING PRODUCT MOLDS WILL BE SOLD AT AUCTION PolyFlange Dock Floats Molds Semi-Automated Waste Carts Molds Plastic Cans/Liners (for Street Furniture ) Molds Double Walled Case Molds 2 x 4 x 8 Cutaway View 2 x 4 Float 4 x 4 Float Dock Floats Dock Being Set in Place Waste Can Can w/handles POLYFLANGE DOCK FLOATS COME IN 3 FOOTPRINTS: 2 x4, 3 x4, And 4 x4. Float Sizes: 2 x4 Depths: 8, 12, 16, 18, 20, 22 3 x4 Depths: 12, 16, 18, 20, 22, 24 4 x4 Depths: 12, 16, 18, 20 PROPRIETARY WASTE CARTS: Blow Molded, Semi-Automated Waste Carts In Three Sizes: 3190 90 Gallons 3165 65 Gallons 3140 40 Gallons WASTE CART SERVICE PARTS: Replacement Part For: Bracket (3165/3190 Carts) Handle (3390R Cart) 3110 Lid (3190 Cart) 3115 Lid (3390U Cart) 3320 Lid (3390R Cart) Purchased Component Parts: Wheels, Axles, Latches, Wear Pads, Etc. OTHER WASTE PRODUCTS: Plastic Cans/Liners Used In Street Furniture: Proprietary Cans/Liners (With Or Without Handles) 22 & 32 Gallon Cans/Liner Please Visit www.biditup.com for More Information REAL ESTATE TO BE OFFERED SUBJECT TO CONFIRMATION Formerly of: TOLEDO MOLD & DIE 109 Sands Road, Reidsville, NC 27320 COMPLETE BLOW MOLDING FACILITY 120,000 SQ.FT. ON 17.5 ACRES Sale Subject to Reserve and Acceptance of any Bids Subject to Confirmation by the Owner LAND Total Site Acreage is 17.5 Acres Gross Building Area - 120,900 Sq.Ft. MANUFACTURING PLANT 90,000 Sq.Ft., Includes a 37,500 Sq.Ft. Addition Completed in 2010 Ceiling Height: 32.5 Feet High at Peak, 20 Feet High at Eaves A New Employee Break Room (w/restrooms) Was Added in 2013 New AEC Central Material Handling System Added in 2013 200-Ton Chiller; 100-Ton Tower 7 Silos (5 @ 130,000 Lbs.; 2 @ 180,000 Lbs.) 10 Dock Doors WAREHOUSE 30,600 Sq.Ft. 3 Dock Doors Ceiling Height: 18.5 Ft. High at Peak, 14.5 Ft. High at Eaves FOR ADDITIONAL INFORMATION, PLEASE CALL 818.508.7034
Live On-Site & Webcast AUCTION Tue., March 20 at 10:00am EDT 109 Sands Road, Reidsville, NC Assets Formerly of: Cincinnati Milacron Blow Molder Rapid Granulator AEC Vacuum Pumps COMPLETE BLOW MOLDING FACILITY! PROPERTY, PLANT & EQUIPMENT 2301 Belgrave Avenue Huntington Park, CA 90255 Phone: 818.508.7034 Fax: 818.508.3025 info@biditup.com Brian Holland, Auctioneer NC License #8998 MACHINERY AUCTION, LOOK INSIDE! ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER Cincinnati Milacron 5 Lb. Blow Molder SCAN QR CODE TO SEE ALL INFORMATION ABOUT THIS AUCTION! ON-SITE & WEBCAST AUCTION AUCTION: Tuesday, March 20, Beginning at 10:00am EDT LOCATION: 109 Sands Road, Reidsville, NC 27320 PREVIEW: Monday, March 19, 9:00am to 4:00pm or By Appointment COMPLETE BLOW MOLDING FACILITY! REAL ESTATE: 120,000 SQ. FT. ON 17.5 ACRES TO BE OFFERED IN BULK OR PIECEMEAL LODGING BEST WESTERN (336) 893-7540 3330 Silas Creek Pkwy, Winston-Salem, NC HOLIDAY INN (336) 361-4000 101 Express Drive, Reidsville, NC 27320 Assets Formerly of: DIRECTIONS FROM: PIEDMONT TRIAD INTERNATIONAL AIRPORT (PTI): Head southeast on Ted Johnson Pkwy toward PTI Dr. Slight left onto S Arrival Dr/Ted Johnson Pkwy. Slight right onto Airport Pkwy/Ted Johnson Pkwy. Merge onto I-73 N. Merge onto US Hwy 220 N. Turn right onto US-158 E. Turn right to merge onto NC-87/Freeway Dr. Turn left onto S Scales St. Turn right onto Sands Rd. Destination will be on the right. ONSITE BIDDER INSTRUCTIONS: $500 cash minimum registration deposit or 25% of approximately bid amount (whichever is greater) via wire transfer ACH, cashier s check or bank letter to Blank Signed Company Check (To be returned once final payment is received). Please refer to www.biditup.com for complete registration information. ONLINE BIDDER INSTRUCTIONS: All internet bidders must register for this auction at least 72-hours prior to the sale date, if you do not you will not be approved. All internet bidders must provide a wire transfer deposit of approximately 25% of your planned spending amount or $2,500 minimum, whichever is greater in order to be approved to bid. Those who do not post the deposit will not be approved. Period. Please refer to www.biditup.com for online bidder terms. PCM Preceision Custom Molders, Inc UPCOMING AUCTION CALENDAR PRECISION CUSTOM MOLDERS COMPLETE PLASTIC INJECTION MOLDING FACILITY Tuesday, March 6th at 10:00am CST 1802 Holian Drive, Spring Grove, IL 60081 GOODMAN MFG. CO., L.P. MFR. OF HEAT EXCHANGERS & AIR CONDITIONERS Wednesday, March 7th at 10:00am CST 1502 Greengrass Drive, Houston, TX 77008 TRITON SERVICES INC. LATE MODEL CONSTRUCTION EQUIPMENT Thursday, March 8th at 11:00am EST 12017 E Miami River Road, Cincinnati, OH 45252 FOR THE COMPLETE TERMS & CONDITIONS OF THE FEATURED AUCTION Please visit our website www.biditup.com Thinking of having an auction or need an appraisal? Call us at 818.508.7034