MAXAIR Systems A full-capability line of particulate filtering PAPRs MAXAIR CAPR, 700, 800, and 300 advanced designs incorporate highly differentiated advantages over conventional Powered Air Purifying Respirator designs. Integrated Helmet eliminates cumbersome breathing tubes and bulky waist mounted blower units Always-On-And-Visible Safety Status LEDs ensure real-time awareness of safe air flow and battery charge level 3-Level User Selectable Air Flow Ranges provide added user comfort Easy de-con saves time and cost Easy don/doff, Low Cost Disposables plus No Fit Testing make MAXAIR the most cost effective system CAPR Cuff CAPR Shroud CAPR Double Shroud CAPR Hood MAXAIR Systems provide the most cost effective solutions for High Efficiency particulate filtration protection across many industries and for many applications. 700 Cuff 700 Shroud 800 Hood 300 Double Shroud Hood
MAXAIR s highly integrated design eliminates the conventional PAPR s reliance on cumbersome air tubes and bulky blower units. When compared to conventional PAPRs and N95 respirator masks, the lightweight MAXAIR helmets, with their positive pressure air flow and unique safety LEDs, standout as a superior method of personal respiratory protection. MAXAIR CAPR COMPETITOR (CONVENTIONAL) PAPRs MAXAIR CAPR Standard System Configuration Components The CAPR Cuff System is optimized for routine use while caring for patients in health care facilities. It includes a unique, Snap On - Snap Off DLC (Disposable Lens Cuff). CAPR provides greater safety, comfort, convenience, patient friendliness, and cost effectiveness than N95s and conventional PAPRs due to MAXAIR s exclusive NO Hose, NO bulky blower unit, and unique LED safety indicators. CAPR Shroud and Hood Configurations are available for added contact protection and higher risk situations. NOTE: Face seals, Cuff, Shroud, or Hood, and Comfort Strips for the front Helmet headband are purchased separately, as are additional filters.
All MAXAIR Systems Helmets have exclusive always on and visible safety LEDs to uniquely provide unobtrusive visual monitoring, in the users peripheral vision, of all-important indications of battery charge status and air flow. These indicators eliminate the need for peripheral test equipment and off-use time for manually measuring these key operational safety parameters. MAXAIR Systems Helmets have five LED Safety Status Indicators located on their underside front that are always visible in the user s peripheral vision. They alert the user to the safe operating conditions of the system. During real-time use, they provide advanced warning alert to the user when the MAXAIR System is no longer able to maintain adequate airflow and/or battery charge to provide adequate or continuing protection for the user. MAXAIR 700 Standard System Configuration Components The 700 Cuff Systems are optimized for medical health care facilities, including Emergency Preparedness, ED, EH&S, and general patient care. The 700 s unique, Disposable Cuff and integrated Filter Cover-Lens provides fast de-con and change between uses. Greater safety, comfort, convenience, patient friendliness, and cost effectiveness verses conventional PAPRs is due to MAXAIR s exclusive NO Hose, NO bulky blower unit, and unique LED safety indicators. The 700 Shroud Systems are optimized for activities throughout medical health care facilities as well as many bio-medical and industrial applications. They include a unique, Disposable Shroud and integrated Filter Cover-Lens for faster de-con, and greater safety, comfort, convenience, patient friendliness, and cost effectiveness. The shroud can easily be changed to a cuff for added versatility. NOTE: Face seals, Cuff or Shroud, and Comfort Strips for the front and rear Helmet headbands are purchased separately, as are additional filters
The MAXAIR integrated system design minimizes the number of parts and interconnections, thereby reducing time for assembly and disassembly. Fewer parts with smoother design consistency greatly facilitates ease, speed, and cost effectiveness of de-con between uses. CAPR Cuff System Components Highly integrated, few items Easy, time conserving de-con Competitor Cuff System Components Low Level of integration, many components Time consuming, arduous de-con MAXAIR 800 and 300 Standard System Configuration Components The 800 Hood Systems are optimized for maximum contact protection and versatile infection prevention activities in Bio-Medical and Industrial, pharmaceutical manufacturing, and Nuclear applications. They include a single piece integrated 360 o protection breathable hood-filter-lens for easy change-out between uses. MAXAIR provides the advantage of greater safety, comfort, convenience and cost effectiveness as compared to conventional PAPRs due to MAXAIR s exclusive NO Hose, NO bulky blower unit, and unique LED safety indicators. The 300 Double Shroud Hood System is optimized for maximum contact protection and versatile infection prevention in Bio-Medical and Industrial applications such as BSL-3 labs. The single piece 360 o protection hood with breathable double shroud, High Efficiency filter, and lens allows easy change-out provides maximum protection and allows easy changeout between uses. For these very high risk applications, the 300 System provides greater safety, comfort, convenience and cost effectiveness than conventional PAPRs. MAXAIR provides a unique combination of LED safety indicators plus NO Hose, plus NO bulky blower unit. NOTE: Hoods and Comfort Strips for the front and rear Helmet headbands are purchased separately
MAXAIR Helmets are highly reliable with virtually no maintenance. The integrated blower air flow is uniquely microcomputer controlled to automatically compensate for filter loading during real-time use to ensure continuous safe air flow to the user. MAXAIR Helmets and Helmet Accessories Order no. Description QTY 2070-03 CAPR System Helmet (includes 2071-01 Liner) 1/Box 2061-03 Filter Cover Cap (FCC) (2070-03 Helmet) 3/Box 2071-01 Helmet Liner (2070-03 Helmet) 1/Box 2065-03 2000-700/800 Helmet 1/Box 2061-01 Filter Cover (2065-03 Helmet) 1/Box 2025-03 2000-300 Helmet 1/Box 2000-201 Comfort Strips (Typically replaced when the face seal, Cuff, DLC, Shroud, Hood, is replaced) 36/box 00722175 Helmet Power Cord (59 ) 1ea 00722152 Right Angle Helmet Power Cord (49 ) 1ea
MAXAIR s unique channeled air flow and low-noise motor provide the quietest and coolest PAPR for excellent communications and protection against heat stress. MAXAIR provides users more selection than conventional PAPRs of air flow volume to match their work level and breathing requirements. MAXAIR Filters and Filter Cartridges Use with Helmet Order No. Description QTY Filter Cartridge Use With 2164-10 HE Filter Cartridge 3/Box 2000-36 Battery 2000-30 Battery 2070-03 2165-10 Post Filter Cartridge (required for all hood configurations) 3/Box 2163-10XP HE Filter Cartridge 3/Box 2065-03 2025-03 2160-10 HE Filter Cap 10/Box
MAXAIR s advantages helmet designs are matched only by their advantageous face seal and head cover designs. Low Cost, fast don/doff designs as the CAPR DLC (Disposable Lens Cuff), provide the lowest cost respiratory protection for long term routine use. Cost analyses vs. both N95 Mask respirators and conventional PAPRs demonstrate that MAXAIR Systems with their lower cost disposables provide lower ongoing operating cost while providing superior safety, comfort, and convenience. MAXAIR Face Seals and Head Covers Use with Helmet Order No. Description QTY 2365-02SM DLC Small/Medium 40/Box 2365-02ML DLC Medium/Large 40/Box 2260-05SM 2260-05ML DLC Shroud Small/Medium DLC Shroud Medium/Large 2261-01SM 2261-01ML DLC Double Shroud Small/Medium DLC Double Shroud Medium/Large 2070-03 2270-01SM 2270-01ML DLC Pre Filter Hood Small/Medium DLC Pre Filter Hood Medium/Large 2270-03SM 2270-03ML DLC XP Pre Filter Hood Small/Medium DLC XP Pre Filter Hood Medium/Large
Unique face seal and head cover designs are both comfortable and cost effective. MAXAIR s face seals and head covers provide appropriate PPE protection across many industries and numerous applications where respiratory protection is an issue. MAXAIR Face Seals and Head Covers Use with Helmet Order No. Description QTY 2360-01 Disposable Cuff, SM 2360-02 Disposable Cuff, ML 2260-01 2260-02 Disposable Shroud, SM Disposable Shroud, ML 2000-25DMA Hood 10/Box 2065-03 2000-29 Pre-Filter Hood 10/Box 2025-03 2120-10 Hood, Double Shroud 20/box
MAXAIR s Li-Ion Batteries provide industry leading, extended continuous use per charge. The Standard battery provides up to 8-10 hours of continuous use. The Extended battery provides up to 16-20 hours of continuous use. MAXAIR Batteries and Belts Order No. Description QTY 2000-36 Li-Ion Battery 4 Cell (Typically 8-10 hours continuous use per full charge) 1/Box 2000-30 Li-Ion Battery 8 Cell (Typically 16-20 hours of continuous use per full charge) 1/Box 2000-76 Battery Belt 1/Bag MAXAIR Chargers MAXAIR System Accessories Order No. Description QTY 2600-01 Battery Charger 1/box Order No. Description 2000-204 Helmet Hooks QTY 6/pkg 2601-06 6-Gang Charger includes six 2600-01 Chargers 6 Gang Charger 1/box 2000-206 Liner Foam Kit 5/box 2000-SB Carry Bag 1/pkg 2601-06B 6-Gang Charger Bracket accommodates up to six 2600-01 Chargers, purchased separately. 6 Gang Charger Bracket 1/box
MAXAIR Systems offers the industry s total solution for deploying optimum safe, comfortable, and cost effective PPE. The MAXAIR 2780-06 CART provides storage of six systems and typical accessories. The mobile CART provides rapid deployment around the institution as well as secure storage when systems are not in use. Storage Mobility Security Everything you need Wherever you need it Whenever you need it Six Complete MAXAIR Systems Charging Station All batteries, Always Ready Box of Comfort Strips Boxes of Current-Use and Spare DLCs Space for Box of Gloves Decon Wipe Cannister Holder Quick Reference Don/Doff, Assembly Poster Single Lock for Doors and Lid