SC1515 Radiator coolant replacement system WOLF S HEAD Product Catalogue 2013 - Pneumatic design provides simple and easy extraction - Transparent twin cylinder, easy to monitor fluid separation process - Also for fluid extraction application Capacity: 16-16L, High - 1250mm Weight: 44 kg Dimension: 330 x 450 x 1400mm Pneumatic operation PC500 Power steering fluid changer WOLF S HEAD Capacity: 2 Liters Weight: 33.3 kg Dimension: 500 x 480 x 940mm Pneumatic operation AT1000A Professional automatic transmission fluid exchanger WOLF S HEAD Capacity: 20 Liters separate used fluid and new fluid. Weight: 46.24kgs Dimension: 650 x 530 x 980mm Pump: Gear Pump *Prices and specifications are subject to change without prior notice. 87
DT-800R Automatic transmission fluid exchanger Voltage: AC220V 50Hz or DC 12V Power: 0.18kw Weight: 40kg Length: 58cm Width: 47.8cm Height: 109.5cm WDF-A30 Automotive refrigerant handling system High pressure: 0~3Mpa Vacuum: 0~0.1Mpa Precision of pressure measure: 1%of full scale(fs) Weight scale range: 0~25Kg Precision of weight scale: 0.2%of full scale(fs) Weight scale display precision: 10g Speed of vacuum zing: 120L/min Refrigerant cylinder capacity: 14Kg CNC602A Injector cleaner & tester LAUNCH Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely. Uniformity/Spray ability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. Auto test: To test injectors by simulating different working conditions. Specifications: Power requirement: AC240v/50Hz/1Ph, Input power: 250W, Ultrasonic cleaner power: 100W, Simulated RPM range: 10~ 9990rpm; step: 10rpm, Time range: 1~9999s, Pulse width: 0.5~25ms; step 0.1 ms, Fuel tank capacity: 4700ml, Dimensions: 385mm 410mm 500mm, Weight: About 35kg. 88 *Prices and specifications are subject to change without prior notice.
WH505S Pressure brake bleeder WOLF S HEAD Product Catalogue 2013 Air operated pressure brake bleeder Suitable for clutch bleed as well as brake bleed. 5 Liter capacity tank. Complete with master cylinder adaptor kit Specification: * Dimension: 350 x 275 x 450mm * Weight: 10kgs WH509 Brake fluid condition tester WOLF S HEAD There is an electronic circuit design for the tester to maintain its accuracyin the event of power shortage. High tech brake fluid sensor, easy to operate. User friendly handle to perfectly fit the hand. The tester exam the quality of the brake fluid.*13. Benz (C- Class, E- Class, S- Class). *Prices and specifications are subject to change without prior notice. 89
EAOD3080E Waste oil drainer with extension funnel Safe and economical means of draining oil Suitable devices to drain, by gravity, waste oil from engines, gear boxes and differentials of all vehicles Oil drainer with center mounted adjustable collecting bowl Adjustable collecting bowl height to work with jack lift or servicing cock Equipped with a valve for collecting bowl to inspect drained oil before it enters the reservoir WARNING: Do not use with corrosive or inflammable products Tank capacity: 80 liters Collection bowl capacity: 18L Collection bowl diameter: 400mm/16 Extension funnel diameter: 606mm/23.8 Oil discharge system: Pneumatic Weight: 22kgs HK090E Air operated oil changer Pneumatic oil changer & waste oil receiver without transparent chamberc/w standard accessories. Lifting type centre column With big oil basin Capacity: 90 liters Weight: 40kg Oil discharge system: Pneumatic Optional accessories: HK290E_01 Transparentchamber assembly Features: Parts code: item 65 to 89 Capacity of transparent chamber: 8 liters Operating air pressure: 0.5bar 90 *Prices and specifications are subject to change without prior notice.
16310021 Air operated oil changer Product Catalogue 2013 Extract used oil and other fluids from any vehicle using the venturi- vacuum extracting system Great for cars, boats, motorcycles Vacuum- charged unit is completely portable and easy to use Includes six suction probes (metal and flexible) equipped with quick- disconnect couplers for fluid extraction Adapters for BMW, Mercedes, Citroen and Volkswagen are also included Self- evacuating feature makes emptying clean and easy Tank capacity: 100 liters Chamber capacity: 8 liters Air pressure for vacuum: 100-115psi Suction speed: 1.5-2lpm / 0.4-0.5gpm Oil discharge system: Pneumatic Weight: 38kgs 16110021E 2-in-1 Waste oil drainer and changer Combination of waste oil suction/drainer Extract used oil and other fluids from any vehicle using this venture- vacuum extracting system Suitable devices to drain, by gravity, waste oil from engine differentials of all vehicles Vacuum- charged unit is completely portable and easy to use Includes six suction probes (metal and flexible) equipped with quick- disconnect couplers for fluid extraction Adapters for BMW, Mercedes, Citroen and Volkswagen are also included Be equipped with a valve for collecting bowl to inspect drained oil before it enters the reservoir Self- evacuating feature makes emptying clean and easy Hand wheel connecting seat easy to adjust the height of the oil collectingbowl Tank capacity: 100 liters Chamber capacity: 8 liters Air pressure for vacuum: 100-115psi Suction speed: 1.5-2lpm / 0.4-0.5gpm Collection bowl capacity: 18L Collection bowl diameter: 400mm / 16 Extension funnel diameter: 606mm/23.8 Oil discharge system: Pneumatic Weight: 45kgs *Prices and specifications are subject to change without prior notice. 91
17221001 Hand operated oil pump Feature: Hand- pushing type: quite easy and convenient for movement. Light and portable type; operate manually; No electricity is needed. Suitable for all sorts of machinery, vehicles, airplanes, ships, etc. The efficient instrument for infusing grease powerfully for lubrication & maintenance purpose. The barrel is of Japanese type and is of high class design. The base is equipped with foot- stepping stand. The operation will be even better with foot stepped on it. Specification: - capacity: 20 liters; deliver rate: 65 cc/each cycle; delivery hose length: 6.5 feet& net weight: 10.0kg. 1702003 Hand operated grease pump Capacity: 16kgs / 35.2lbs Barrel diameter: 8.7" / 220mm Height: 15" / 380mm Hose length: 6.5ft / 2m Weight: 6kgs / 13lbs 1700512 Air-operated grease distribution kits The most economical & convenient combination for dispensing grease Complete set of fluid transfer accessories gives end usertrouble- free using experience The high efficiency of pump is ensured with the original selection of parts and accessories 50:1 ratio pump: 1701501 Drum application: 20-30kgs Drum trolley: 1708001 Drum cover: 1709002 Follower plate: 1709012 ¼ *13 connection hose: 1762213 Grease gun: 1785700 Weight: 22.5kgs 92 *Prices and specifications are subject to change without prior notice.
Product Catalogue 2013 1700536 Mobile grease dispenser platform for drums of 180 220kgs The most economical & convenient combination for dispensing grease Complete set of fluid tranfer accessories gives end user trouble- free using experience The high efficiency of pump is ensured with the original selection of parts and accessories 50:1 ratio pump: 1701503 Drum application: 180-220kgs Drum trolley: 1708002 Drum cover: 1709006 Follower plate: 1709016 ¼ x 13 connection hose: 1762213 Grease gun: 1785700 Weight: 38kgs 1788001 Brake bleeder Air operated bleeding device for hydraulic brakes and clutches of all motor vehicles Various types of plugs equipped to suit for various types of cars Reserve indicator equipped to warn when the fluid is finishing Reserve air tank enables constant pressure for several bleeding operations without further recharges Convenient, easy to operate and safe Fluid reservoir capacity(upper chamber): 6L Reservoir air tank capacity(low Chamber): 7L Max. working pressure fluid(middle chamber): 30psi Max. pressure reserve reservoir(low chamber): 145psi Weight: 10kgs *Prices and specifications are subject to change without prior notice. 93
L860153 Air reels Heavy ribbed steel plate to ensure strong support Special swivel joint for easy maintenance and repair Ball bearing swivel joint structure, largely reducing the friction between swivel spool and swivel body Inlet/outlet (inch): 3/8 Working pressure (psi/bar): 300/20 Hose I.D.(inch): 3/8 Hose length(m): 15 Weight: 21kgs M860154 Oil reels Heavy ribbed steel plate to ensure strong support Special swivel joint for easy maintenance and repair Ball bearing swivel joint structure, largely reducing the friction between swivel spool and swivel body Inlet/outlet (inch): ½ Working pressure (psi/bar): 2000/138 Hose I.D.(inch): ½ Hose length(m): 15 Weight: 22kgs H860152 Grease reels Heavy ribbed steel plate to ensure strong support Special swivel joint for easy maintenance and repair Ball bearing swivel joint structure, largely reducing the friction between swivel spool and swivel body Inlet/outlet (inch): 1/4 Working pressure (psi/bar): 5000/345 Hose I.D.(inch): 1/4 Hose length(m): 15 Weight: 22kgs 94 *Prices and specifications are subject to change without prior notice.
29507153 Air reels Product Catalogue 2013 Perfect for application in industries, vehicle repair & maintenance workshops Spring tension easily adjustable from the outside Designed to transfer air, water, oil and grease Compact size and easy installation Simple hose replacement without dismantling the reel Inlet/outlet (inch): 3/8 Working pressure (psi/bar): 300/20 Hose I.D.(inch): rubber 3/8 Hose length(m): 15 Weight: 52.8kgs 27527153 Air hose reel Plastic spring driven hybrid polymer air hose reel. Technical Specification: - Hose length (ft) 50 Hose material Hybrid Polymer Hose Inlet/Outlet (inch) ⅜ Working pressure (psi/bar) 300/20 Hose I.D. (inch) ⅜ NW/GW (kgs) 13.2/15.4 CR605153SG Cable reels Spring retractablewithlatch Helps make the workplace safe by keeping long electrical cables up and out of harm s way Cable is oil and waterproof Plug & socket: German type Sectional area: 1.5mm2 Number of core: 3 Type: H05VV- F / H07RN- F Length(m): 15 Volt(V): 230 Weight: 5.8kgs *Prices and specifications are subject to change without prior notice. 95
1781801 Digital oil control valve Modular extensions and full set of connections available Enables pump to be easily adjusted according to needs Application: pump with drum or rigid suction tube for obtaining extended lengths Inlet connection: ½ female Fluid range: 1-35L/min Pressure range: 0.5-50bar / 7-750psi Temperature: Max. 60 0 C Precision: ±0.5% Spout: Rigid, Manual tip Power source: 1*3V CR2 battery Weight: 1.4kgs 1701033 Air operated oil pump for drums Air operated for integration into dispensing system Smart design with fewer parts for less pump wear & tear Differentia l air motor ensures smooth pumping Typical fluids handled include motor oil, synthetic oil, hydraulic oil, gear oil and automatic transmission fluid Double action Suitable for use of oil to 150SAE Supplied with adjustable 2 bung adapter Drum application: 180-220L Pressure ratio: 3:1 Air inlet pressure: 5-8bar / 70-115psi Max. fluid pressure: 24bar / 348psi Air motor effective diameter: 63mm / 2.49 Air consumption(min): @8bar 110L @115psi 3.9CFM Max. free flow rate(min): 12L / 3.2gpm Syction tube diameter: 42mm /1.65 Suction tube length: 940mm / 37 Air inlet connection: ¼ quick plug ¼ NPT female Oil outlet connection: ½ M Weight: 6kgs 96 *Prices and specifications are subject to change without prior notice.
1700211DT Air operated oil pump for IBC Product Catalogue 2013 Air operated for integration into dispensing system Wall mounted kits for empting reservoirs composed of pump, bracket, meter and hose Suitable for dispensing oil for mobile installations Supplied with all required fittings and accessories for connection of pump to the air and oil lines or directly to a hose reel Rigid suction tube available Optional accessories - M860154 Oil reels Wall mounted pump: 1701031 Pressure ratio: 3:1 Wall bracket assembly kit: WB10000 - WB10001: wall bracket - WB10002: suction hose adaptor - WB10005: rigid suction tube - WB10006: suction hose - WB10007: worm gear - FV00001: foot valve - FR00001: filter - ½ x 13 connection hose: 1763513 - Digital control valve: 1781501 - Weight: 12kgs *Prices and specifications are subject to change without prior notice. 97
1700232 Drum trolley Mobile unit for 205 litre drums Suitable for dispensing oil at medium viscosity up to SAE 150 for mobile applications Drum trolley ensures high mobility and efficiency Standard model composed of 3:1 pump, trolley, digital oil meter with nozzle and 4 metres of connection hose 1701033 pump 1781801/1781501 digital metered nozzle 1763413 hose assembly 1708002 trolley 7016 Electric part washer 20gallons electric part washer Recirculation Pump Removable Shelf 98 *Prices and specifications are subject to change without prior notice.