Be-Ge 30 Luxury / 31 Medium The seats illustrated is fitted with extra items. The seats can be equipped with extra shoulder support and adjustable 3 point belt. The seats controls are placed in a user friendly control panel. BE-GE 30 Luxury/31 Medium series are air suspended seats that offer the highest comfort levels available. Among the new innovations on offer are the air operated shoulder support and the DPS function. The DPS function allows the driver to easily change between static and air suspended mode with a touch of a button in order to adapt to the roads conditions. Parallel with the seats innovative functions you will find a modern and practical design with flexible seat comfort and the best ergonomics. The 30/31-series is suitable for buses, trucks and railway and with its wide range of options it can be modified to be used in lots of applications, such as construction-, forestry- and industrial vehicles. Integrated headrest is standard, but as option separate headrest can be chosen. The user friendly control panel can be placed on the seats either side or on the front.
Be-Ge 30 Luxury/31 Medium Be-Ge 30-series standard features are weight independent height adjustment, quick air release, air operated tilt of seat cushion and release of slide rails, DPS function, air operated lumbar and side support and integrated headrest. The seat can also be specified with 640 mm backrest and separate headrest and a manual air controlled height adjustment system. Be-Ge 31-series is equipped as standard with weight independent height adjustment, quick air release, mechanical tilt of seat cushion and release of slide rails, air operated lumbar support and integrated headrest. The seat can also be specified with 640 mm backrest and separate headrest and a manual air controlled height adjustment system. Options: The seats can be equipped with armrests, extra shoulder support, electrical heating, comfort seats cushion (extra thick), 3-point seatbelt with height adjustment as extra option, 2- or 4-point seatbelt, 4-way headrest (640 mm backrest version), Airvent (ventilated seat cushions), vibration indicator, built in compressor, leather trim. For the 31-series the DPS function and air operated side support can be specified, this is standard for the 30-series. The DPS function is available as an option. Shoulder support (Optional) Integrated headrest Separate 4-way adjustable headrest for the 640 mm back version Air operated side support (Optional) Integrated 3-point seat belt (Optional) Adjustable D-loop as extra option. Quick release backrest adjustment Air operated lower back adjustment Adjustable front edge Length adjustment 200 mm (Mechanical, 31-series) Controls for: Heating (optional) Airvent (optional) Air operated backrest fuctions Controls panel for: Quick air release Tilt adjustment for seat cushion -4 to + 12 Height adjustment Adjustable shock absorber Length adjustment 200 mm (air operated for 30-series) DPS function (Option on 31-series) 585 6x10 mm steps 585 264 246 20 120 Height adjustment 20 Suspension reserve 20 283 100 Height adjustment (Comfort seat cushion +19 mm) 12-4 Swing free 309-403 568 38 32 70 861 157-257 36 259 271 706 20 120 Height adjustment 20 20 Suspension reserve 283 100 Height adjustment (Comfort seat cushion +19 mm) 12-4 Swing free 305 38 368 32 70 1076 36 611 100 597 100 Length adjustment SIP according to SS-ISO 5353 H-point according to ISO 6549 100 597 100 Length adjustment SIP according to SS-ISO 5353 H-point according to ISO 6549 259 271 Be-Ge Industri AB Main Office Box 912, SE 572 29 Oskarshamn Phone: +46 (0)491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0)491-819 00 e-mail: info@be-ge.se Be-Ge Seating UK Ltd. UK Sales Unit 3, The Fulcrum, Lows Lane, Phone: +44 844 800 0558 Homepage: www.be-ge.co.uk Stanton, Derbyshire, DE7 4QU Fax: +44 844 800 0559
Be-Ge 34 Static The seat pictured contains optional features. Among the options a 3 point belt is available, with fixed or adjustable D-loop. The seat can easy be adjusted up to 120 mm in height with the user friendly controls. BE-GE 34 Static series is a Soft static seat, this means the seat is nearly static with a comfortable damping function. The seat s innovative design makes it possible to adjust the height as much as 120 mm. The seat also comes with an adjustable seat cushion and a mechanical lumbar support as standard. There is also a wide range of options available which allows the seat to be specified to individual requirements. Also the user friendly control panel can be placed on the either side of the seat or on the front. Parallel with the seats innovative functions you will find a modern and practical design with flexible seat comfort and the best ergonomics. Integrated headrest is standard, but as option a separate headrest can be chosen. The 34-series is suitable for buses, trucks, railway and other applications where a static seat is required.
Be-Ge 34 Static Be-Ge 34-series standard features are 120 mm height adjustment, 200 mm length adjustment, Quick release backrest adjustment, mechanical lumbar support, adjustable seat cushion and integrated headrest. The seat can also be delivered with 640 mm backrest and separate headrest. OPTIONS: The seats can be equipped with armrests, electrical heating, comfort seats cushion (extra thick), 2- or 3-point seatbelt with height adjustment as extra option, 4-way headrest (640 mm backrest version), vibration indicator, leather trim. Integrated headrest. Separate 4-way adjustable headrest for the 640 mm back version. Integrated 3-point seat belt (option) Adjustable D-loop as extra option Mechanical lumbar support Quick release backrest adjustment Controls for heating (option) Length adjustable seat cushion Lenght adjustment 200 mm Control panels for tilt adjustment for seat cushion -4 to + 12 and height adjustment 120 mm 585 6x10 mm steps 585 264 246 120 Height adjustment Swing free 309-403 38 861 157-257 36 706 120 Height adjustment Swing free 309-403 38 1076 36 611 12 12 283 (Comfort seat cushion + 19mm) 100-4 568 597 100 Length adjustment 32 SIP according to SS-ISO 5353 H-point according to ISO 6549 259 271 283 (Comfort seat cushion + 19mm) 100-4 568 597 100 Length adjustment 32 SIP according to SS-ISO 5353 H-point according to ISO 6549 259 271 Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Phone: +46 (0) 491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0) 491-819 00 e-mail: info@be-ge.se
Be-Ge 38-series The seat pictured contains optional features. Front-mounted controls mean narrower dimensions. Integrated 2-point or 3-point belts are also available as option. The BE-GE 38 series is a static driver s seat with tilt adjustment. The seat, which is suitable for smaller vehicles or for use as a passenger seat where no suspension is required, has been constructed with essentially the same high level of comfort and flexibility as other seats in the 3000 series. This means that you yourself can choose the side that the controls are fitted to, the type of foam design most appropriate for you, or whether you require any type of belt for the seat, all depending on your requirements. As you might expect, there is also a large range of options to choose from, including armrests, headrests and various types of bases, etc. A 640mm back comes as standard, however the seat can also be fitted with a HBC back.
Be-Ge 38-series The Be-Ge 38 series has as standard tilt adjustment, 640mm back support, mechanical lumbar adjustment, length adjustment of the seat cushion and 200mm slide rails. The seat can also be supplied with a high HBC type back. OPTIONS: The seat can be fitted with armrests, 4-way headrest (640mm back), HBC back, electric heating, Airvent, comfortable seat cushion (extra thick), foam with extra side support, 3-point belt with height adjustment as an additional option, 2-point belt, micro-switch, vibration indicator and leather cover. If air is available in the vehicle, the seat can also be supplemented with air-controlled slide rails, lumbar adjustment, side support and shoulder support. 4-way headrest (option) Shoulder support (optional for HBC back only) Air-controlled side support (option) Mechanical lumbar adjustment (Air-controlled as option) Integrated 2-point belt (option) Length adjustment for seat cushion Length adjustment, 200 mm Integrated 3-point belt (option) Adjustable as an extra option 640mm back as standard HBC back with integrated headrest optionally available Quick release back adjustment Controls for: * Heating (accessory) Airvent (accessory) Air-controlled lumbar/back functions Control panel with controls for: * Tilt adjustment of seat cushion -4 to +12 Length adjustment 200 mm (optional air release) * Can also be fitted on either side 589 245 Swing free 309-403 38 861 157-257 36 612 271 (Comfortable seat cushion +20 mm) 12-4 70 568 32 SIP according to SS-ISO 5353 H-point according to ISO 6549 259 272 597 100 100 Length adjustment Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Telefon: 0491-76 18 00 Hemsida: www.be-ge.com Telefax: 0491-819 00 e-post: info@be-ge.se
Be-Ge 39 series The seat pictured contains optional features. Hardwearing seat covers are available as option. Control and armrest solutions can be fitted between the units. The BE-GE 39 series is an air suspended seat with a separate suspension system. The excellent comfort of the seat combined with its great flexibility and extra robust suspension system means that even drivers in the most challenging environments can work in a comfortable working environment for long periods. The separate suspension system means that the seat is extremely well suited to construction machinery, etc. where the armrests and the vehicle s controls are fitted between the seating units. A large range of options and accessories mean that the seat can be adapted to different requirements, and the option of fitting the seat s control panel to either side or the front edge of the seat make the adjustments user-friendly. The controls are located in a user-friendly position on the upper part of the seat.
Be-Ge 39 series The Be-Ge 39 series has as standard a Push-Pull air system, mechanical tilt adjustment, a 640mm backrest, air-controlled lumbar support, length adjustment of the seat cushion and 200mm slide rails both between the units and underneath the seat. OPTIONS: The seat can be fitted with armrests, 4-way headrest (640mm back), HBC back, electric heating, Airvent, comfortable seat cushion (extra thick), foam with extra side support, 3-point belt with height adjustment as an additional option, 2-point belt, reinforced slide rails, micro-switch, vibration indicator, DPS function, built-in compressor, leather cover, air-controlled slide rails, side support and shoulder support. 4-way headrest (option) Integrated 3-point belt (option) Adjustable as an extra option Shoulder support (optional for HBC back only) Air-controlled side support (option) Air-controlled lumbar adjustment Integrated 2-point belt (option) Length adjustment for seat cushion Top length adjustment, 200mm Bottom length adjustment, 200 mm 640mm back as standard HBC back with integrated headrest optionally available Quick release back adjustment Controls for: * Heating (option) Airvent (option) Air-controlled lumbar/back functions Control panel with controls for: * Tilt adjustment of seat cushion -4 to +12 Height adjustment Length adjustment 200mm (optional air release) Shock absorbers DPS function (option for 39 series) * Can also be fitted on either side 589 245 20 Suspension reserve 20 473 70 70 Height adjustment (Comfortable seat cushion 492 mm) 13-4 Swing free 312-392 38 70 1060 157-257 36 612 568 32 SIP according to SS-ISO 5353 H-point according to ISO 6549 597 259 272 100 100 100 Length adjustment, top 100 Length adjustment, bottom Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Phone: +46 (0) 491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0) 491-819 00 e-mail: info@be-ge.se
Be-Ge 3000 C&F The picture shows seat with options Features: Robust suspension design and heavy duty backrest User friendly controls at front, left or right side Several height adjustment systems for every demand Strongly increased side support Seat tilt -4 to +15 Seat cushion length adjustable Infinite adjustable shock absorber The Be-Ge 30-/31-series is our newest series of air suspended seats that offer maximum comfort combined with a heavy duty design and innovative solutions. The seat offers many settings options and flexible adjustment. You can, for example, choose whether to locate the controls in front or to the right or left side. Regarding C & F design (Construction & Forestry), the seat has been further adapted to handle demanding applications. For example, side support has been greatly increased to attain stable seating in environments where the machine moves a lot. A variety of accessories and options are available to adapt the seat to current requirements and conditions. If your vehicle does not have an air connection, a built in compressor is available as an option. Options: Air-controlled horizontal adjustment Air-controlled adjustment of the seat tilt DPS-function; deactives the suspension Pneumatic system + / - Air-controlled side support in the backrest Foam with extra side support in the backrest and the seat cushion Integrated compressor Airvent; active seat ventilation Armrests Seat heating 2-point lapbelt 3-point belt 4-point belt Trimmed in leather Be-Ge Industri AB Main Office Box 912, SE 572 29 Oskarshamn Phone: +46 (0)491-76 18 00 Fax: +46 (0)491-819 00 e-mail: info@be-ge.se Homepage: www.be-ge.com Be-Ge Seating UK Ltd. UK Sales Unit 3, The Fulcrum, Lows Lane, Phone: +44 844 800 0558 Fax: +44 844 8000559 Stanton, Derbyshire, DE7 4QU Homepage: www.be-ge.co.uk
Be-Ge 3000 ERGO The styled and unique design gives the seat a fashionable look. As in the regular 3000-series, also the styled version has it s controls placed in a user friendly panel. As the result of a successful cooperation with the well-known German design and engineering company, Greiner, we proudly present the new Be-Ge 3000 ERGO version. The seat has a re-worked backrest foam that increases the side support and gives the seat a fashionable look. Besides the new look the seat offers you the same great functions and technical solutions as our regular 3000-series, such as: 100mm weight-independent height adjustment system, air operated tilt and length adjustment, infinite adjustable shock absorber, adjutable d-loop and air operated backrest comfort functions, to mention some. Also our innovative and totally unique DPS function and air operated shoulder support is of course available. The increased side support gives the driver a comfortable and cosy feeling. Be-Ge Industri AB Main Office Box 912, SE 572 29 Oskarshamn Phone: +46 (0)491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0)491-819 00 e-mail: info@be-ge.se Be-Ge Seating UK Ltd. UK Sales Unit 3, The Fulcrum, Lows Lane, Phone: +44 844 800 0558 Homepage: www.be-ge.co.uk Stanton, Derbyshire, DE7 4QU Fax: +44 844 800 0559
Be-Ge 3000 ERGO The styled and unique design gives the seat a fashionable look. As in the regular 3000-series, also the styled version has it s controls placed in a user friendly panel. As the result of a successful cooperation with the well-known German design and engineering company, Greiner, we proudly present the new Be-Ge 3000 ERGO version. The seat has a re-worked backrest foam that increases the side support and gives the seat a fashionable look. Besides the new look the seat offers you the same great functions and technical solutions as our regular 3000-series, such as: 100mm weight-independent height adjustment system, air operated tilt and length adjustment, infinite adjustable shock absorber, adjutable d-loop and air operated backrest comfort functions, to mention some. Also our innovative and totally unique DPS function and air operated shoulder support is of course available. The increased side support gives the driver a comfortable and cosy feeling. Be-Ge Industri AB Main Office Box 912, SE 572 29 Oskarshamn Phone: +46 (0)491-76 18 00 Fax: +46 (0)491-819 00 e-mail: info@be-ge.se Homepage: www.be-ge.com Be-Ge Seating UK Ltd. UK Sales Unit 3, The Fulcrum, Lows Lane, Phone: +44 844 800 0558 Fax: +44 844 8000559 Stanton, Derbyshire, DE7 4QU Homepage: www.be-ge.co.uk
Be-Ge 71-series Control panel for quick lowering and stepless height adjustment. The seat pictured contains optional features. The seat can be equipped with extra high and stable side support, XSS. BE-GE 71-series is a low profile air suspended seat, with stepless height adjustment. Quick lowering for comfortable entry and exit together with the stepless height adjustments can be mounted on the right or left side of the seat. This model of seats can be equipped with seat cushion extension. The seat cushion extension makes it possible to adjust the length of the seat in order to sit with ergonomically comfort. BE-GE, the name means a great deal: not at least comfort and quality, both physical and technical. The seat can be equipped with seat cushion extension, to adjust the length of the seat cushion.
Be-Ge 71-series As standard the seat is equipped with height and weight independent adjustment, lumbar support, protective bellow and slide rails. A choice between different seatback heights can be made in order to have a good working position in all kinds of working environments. The different seatback heights are the following: 640 mm, medium height 550 mm and low height 400 mm. All models can be equipped with lapbelt. 3- or 4-point belt can be equipped on models with 640 backrest. On the seat back 640 mm, an extra high and stable seat-and backrest foam can be fitted as extra, XSS. OPTIONS: The seat can be fitted with double shock absorbers, electrical heating in seating and backrest, 2-, 3- or 4-point seatbelt, Airvent, seat cushion extension, compressor set, headrest, armrests, alarm contact, quick release backrest adjustment, and various types of bases. Adjustable headrest (option) Infinitely adjustable lumbar support 3-point safety belt (option) Infinitely adjustable armrest (option) Infinitely adjustable backrest Quick release adjustment as option Height limiter Seat cushion extension (option) Lenght adjustment 160 mm Infinite adjustment of seat cushion angle 8 Combined stepless height and weight adjustment, 80 mm with index Quick lowering 45 90 25 30 Suspension 90 Height adjustment 8 300 770 578 255 210 60 385 515 110 128 105 55 Lenght adjustment SIP according to SS-ISO 5353 H-punkt according to ISO 6549 Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Phone: +46 (0) 491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0) 491-819 00 e-mail: info@be-ge.se
Be-Ge 7150 The seats illustrated is fitted with extra items The seat is equipped with extra large shock absorber BE-GE 7150 is a reinforced air suspended driver seat. It is designed to withstand the most extreme working environments such as in construction vehicles. The seat is equipped with stepless weight independent height adjustment, it can also be specified with a pneumatic system (+ / -). The controls for the quick air release for comfortable entry and exit and the stepless height adjustment can be mounted on either side of the seat. The seat can be equipped with a easy used pneumatic system (+/-) and with extra side support, XSS This model can also be equipped with a seat cushion extension, which provides easier adjustment of the length of the seat in order to sit in the most ergonomical position. The seat can be equipped with front edge adjustment, to adjust the length of the seat cushion
Be-Ge 7150 As standard the seat is equipped with air suspension and weight independent height adjustment, lumbar support, protective bellow and slide rails in reinforced version. The height and weight adjustment system can be exchanged to a pneumatic system (+/-), which gives an easy and quick height adjustment. This system is dependent to the persons weight and the lowering of the seat is done manually. The backrest is reinforced and the height is 640 mm. Standard is with lapbelt 3. An extra high and stable seat-and backrest foam can be fitted as extra, XSS. ACCESSORIES: The seat can be fitted with electrical heating in seating and backrest, Airvent, seat cushion extension, different types of headrest, armrests, alarm contact, 4-point seatbelt, quick release backrest adjustment and various types of bases. Adjustable headrest (accessory) Infinitely adjustable lumbar support Infinitely adjustable armrest (accessory) Seat cushion extension (accessory) Lenght adjustment 160 mm Infinitely adjustable backrest Quick release adjustment as option Height limiter Infinite adjustment of seat cushion angle 8 Combined stepless height and weight adjustment, 80 mm with index Quick lowering Lapbelt 45 18 25 30 Suspension 55 Height adjustment 8 300 805 578 290 245 60 127 152 595 105 55 Lenght adjustment SIP according to SS-ISO 5353 H-punkt according to ISO 6549 Be-Ge Industri AB Box 912 SE-572 29 Oskarshamn, Sweden. Telephone +46 (0)491-761800. info@be-ge.se www.be-ge.com Telefax +46 (0)491-81900. Be-Ge Seating UK Ltd Venture Center, Sir William Lyons Road UK-Coventry CV4 7EZ Phone: +44 844800 0558 Fax: +44 844800 0559 www.bege.co.uk Risbergs Information & Media Oskarshamn
Be-Ge 91-serie The seats illustrated is fitted with extra items Control for quick discharge and combined stepless weight- and height adjustment. BE-GE 91-serie is an air suspended seat, with combined stepless weight- and height adjustment. Quick lowering for comfortable entry and exit, this, together with the stepless weight- and height adjustment can be mounted on the right or left side of the seat. The seat can be equipped with extra high and stable side support, XSS. This model of seats can be equipped with integrated compressor, 12V or 24V, depending on the working environment. BE-GE, the name means a great deal: not at least comfort and quality, both physical and technical. The seat can be equipped with integrated 3-point safety belt.
Be-Ge 91-serie As standard the seat is equipped with weight- and height adjustment, lumbar support, protective bellow and slide rails. A choice between different back heights can be made in order to have a good working position in all kinds of working environments. The different seatback heights are the following: standard 640mm, integrated headrest 800mm, medium height 550mm and low height 400mm. All models can be equipped with lap belt. The backrest version 640mm can be equipped with 3-point belt and/or an extra high and stable seat-and backrest foam, XSS. ACCESSORIES: The seat can be fitted with double shock absorbers, electrical heating in seating and backrest, Airvent, compressor set, headrest, armrests, alarm contact and various types of bases. Headrest infinitely adjustable in 4-way (accessory) Integrated 3-point belt (accessory) Infinitely adjustable lumbar support Infinitely adjustable backrest Height limiter Lenght adjustment 160mm Quick lowering Infinite adjustment of seat cushion angle 8 Combined stepless height and weight adjustment, 80mm with index 386 45 90 600 300 40 30 Suspension 275 80 Height adjustment 8 305 815 210 385 110 110 Be-Ge Industri AB 105 515 55 Lenght adjustment SIP according to SS-ISO 5353 H-punkt according to ISO 6549 Box 912 SE-572 29 Oskarshamn, Sweden. Telephone +46 (0)491-761800. Telefax +46 (0)491-81900. info@be-ge.se www.be-ge.com Risbergs Information & Media Oskarshamn 2005
Be-Ge 92-series The seat can be equipped with different types of headrests The seat pictured contains optional features. The seat can be equipped with adjustable armrests BE-GE 92-series is our most pupular mechanically suspended seat most used in vehicles without air compressors. The seat covers a wide range of applications in all surroundings at either sea or land. Easily accessible, easy-to-use adjustments for individual working comfort. The seats can be equipped with armrests, headrests, Be-Ge s renowned Airvent, electrical heating and different kind of bases depending on the needs in the working environment. BE-GE, the name means a great deal: not least comfort and quality, both physical and technical. The seat can be equipped with integrated 2-, 3- or 4-point safety belt
Be-Ge 92-series As standard the seat is equipped with weight- and height adjustment, lumbar support, protective bellow and slide rails. A choice between different back heights can be made in order to have a good working position in all kinds of working environments. The different seatback heights are the following: 640mm, medium height 550mm and low height 400mm. All models can be equipped with lap belt. The backrest version 640mm can be equipped with 3- or 4-point safety belt and/or an extra high and stable seat-and backrest foam, XSS. OPTIONS: The seat can be fitted with double shock absorbers, longitudinal damper, electrical heating in seat cushion and backrest, 2-, 3- or 4-point belt, Airvent, headrest, armrests, alarm contact, quick release backrest adjustment and various types of bases. Infinitely adjustable headrest (option) Integrated 3-point safety belt (option) Infinitely adjustable lumbar support Infinitely adjustable armrest (option) Infinitely adjustable backrest Quick release adjustment as option Height limiter Infinite adjustment of seat cushion angle 8 Lenght adjustment 160 mm Combined stepless height and weight adjustment, 100mm with index 386 45 90 40 30 Suspension 100 Height adjustment 8 305 790 600 275 385 110 110 105 515 55 Lenght adjustment SIP according to SS-ISO 5353 H-punkt according to ISO 6549 Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Phone: +46 (0) 491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0) 491-819 00 e-mail: info@be-ge.se
Be-Ge 93-series The seat can be equipped with headrest, adjustable. The seat pictured contains optional features. The seat can be equipped with integrated 3-point safety belt. BE-GE 93-series is a mechanical suspended seat, with small mounting dimensions and double shock absorbers. This model of seat is very comfortable and has become very popular in forklifts and other vehicles that require low seat height e.g, cranes, smaller buses, smaller goods trucks etc. This model of seats can be equipped with armrest, headrest, Be-Ge s renowned Airvent, electrical heating and different kinds of base depending on the needs in working environment. BE-GE, the name means a great deal: not at least comfort and quality, both physical and technical. The seat can be equipped with extra high and stable side support, XSS.
Be-Ge 93-series As standard the seat is equipped with weight- and height adjustment, lumbar support, protective bellow and slide rails. A choice between different back heights can be made in order to have a good working position in all kinds of working environments. The different seatback heights are the following: 640 mm, medium height 550 mm and low height 400 mm. All models can be equipped with lap belt. The backrest version 640 mm can be equipped with 3-point belt and/or an extra high and stable seat-and backrest foam, XSS. OPTIONS: The seat can be fitted with electrical heating in seating and backrest, Airvent, headrest, armrests, alarm contact and various types of bases. Infinitely adjustable headrest (option) Infinitely adjustable lumbar support Infinitely adjustable armrest (option) Infinitely adjustable backrest Quick release adjustment as option Height limiter Infinite adjustment of seat cushion angle 8 Lenght adjustment 160 mm Combined stepless height and weight adjustment, 60 mm 386 45 90 25 25 Suspension 80 Height adjustment 8 305 600 260 235 775 (640 mm back rest) 685 (550 mm back rest) 385 110 110 105 515 55 Lenght adjustment SIP according to SS-ISO 5353 H-punkt according to ISO 6549 Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Phone: +46 (0) 491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0) 491-819 00 e-mail: info@be-ge.se
Be-Ge 94-series The seat pictured contains optional features. The seat can be equipped with integrated 3-point safety belt. The seat can be equipped with headrest, adjustable in height. BE-GE 94-serie Softstatic is an almost static driver seat, with limited suspension. The seat has a small mounting dimensions and a height adjustment of 180 mm. This seat is very suitable for smaller goods trucks, smaller buses, cranes, boats etc. This model of seats can be equipped with armrest, headrest, Be-Ge s renowned Airvent, electrical heating and different kinds of base depending on the needs in working environment. BE-GE, the name means a great deal: not at least comfort and quality, both physical and technical. The seat can be equipped with extra high and stable side support, XSS.
Be-Ge 94-series As standard the seat is equipped with limited suspension, lumbar support, protective bellow and slide rails. A choice between different back heights can be made in order to have a good working position in all kinds of working environments. The different seatback heights are the following: standard 640 mm, integrated headrest 800 mm, medium height 550 mm and low height 400 mm. All models can be equipped with lap belt. The backrest version 640 mm can be equipped with 3-point belt and/or an extra high and stable seat-and backrest foam, XSS. OPTIONS: The seat can be fitted with electrical heating in seating and backrest, Airvent, headrest, armrests, alarm contact and various types of bases. Infinitely adjustable headrest (option) Infinitely adjustable lumbar support Infinitely adjustable armrest (option) Infinitely adjustable backrest Height limiter Infinite adjustment of seat cushion angle 8 Lenght adjustment 160 mm Combined stepless height and weight adjustment, 60 mm 386 45 90 180 Height adjustment 305 750 600 8 235 145 208 385 110 110 105 515 55 Length adjustment SIP according to SS-ISO 5353 H-punkt according to ISO 6549 Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Phone: +46 (0) 491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0) 491-819 00 e-mail: info@be-ge.se
Be-Ge 95/98-series The seat pictured contains optional features. The seat can be equipped with safety belt. 95-series can be equipped with an integrated 3-point safety belt and for 98-series lap belt. BE-GE 95-series is a static seat that is mainly used as a passenger seat. Other fields of application are in smaller buses and industrial trucks. This model can be equipped with various armrests, headrests and safety belts; integrated 3-point safety belt or lap belt. The seat can be equipped with extra high and stable side support, XSS. The seat pictured contains optional features. BE-GE 98-series is a static driver seat with adjustment of the seat cushion angle. The seat is suitable for smaller buses, industrial trucks boats and other vehicles with limited space. This model of seats can be equipped with different armrests, headrest, lap belt and different kinds of bases. The seat can be equipped with different armrests.
Be-Ge 95/98-series A choice between different back heights can be made in order to have a good working position in all kinds of working environments. The different seatback heights are the following: 640 mm, medium height 550 mm and low height 400 mm (no lumbar support on the 400 mm). All models can be equipped with lap belt. The backrest version 640 mm in the 95-serie can be equipped with 3-point safety belt and/or an extra high and stable seat-and backrest foam, XSS. OPTIONS: The seat can be fitted with electrical heating in seating and backrest, Airvent, different types of headrest, armrests, slide rails, quick release backrest adjustment and various types of bases. 95-series: As standard the seat is static with lumbar support. 386 Headrest (option) 305 45 90 750 Infinitely adjustable lumbar support Integrated 3-point safety belt (option) 260 225 Infinitely adjustable backrest Quick release adjustment as option 155 120 515 SIP according to SS-ISO 5353 H-punkt according to ISO 6549 500 600 Lenght adjustment 160 mm 98-series: As standard the seat is static with lumbar support, adjustable tilt and slide rails. 386 Headrest (option) 305 45 90 Infinitely adjustable lumbar support Infinitely adjustable armrest (option) 235 8 750 210 Infinitely adjustable backrest Quick release adjustment as option 360 515 SIP according to SS-ISO 5353 H-punkt according to ISO 6549 500 600 Infinite adjustment of seat cushion angle 8 105 55 Length adjustment Lenght adjustment 160 mm Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Phone: +46 (0) 491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0) 491-819 00 e-mail: info@be-ge.se
Be-Ge 8018 Be-Ge 8018 can be equipped with an extremely durable 24 / 7 fabric with leather reinforcements. Weight adjustment is easily made via the front of the seat. Be-Ge 8018 is a mechanical suspended seat especially designed for reach trucks or similar vehicles with limited cab space, which is built to be driven on smooth floors. By placing the suspension unit behind the seat s backrest, the built in height becomes very low but without decreasing the seats comfort. The seat has simple and ergonomically placed controls for weight adjustment, back adjustment and length adjustment. The seat is available with both low and high backrest, the high version is with advantage used in combination with headrest for even more increased comfort during long working phases and is already as standard equipped with adjustable lumbar support. The seat can be equipped with various options such as seat belt and armrest.
Be-Ge 8018 Be-Ge 8018 is a mechanical suspended seat with the suspension unit placed behind the backrest and 50 mm suspension. Weight adjustment is made via the front of the seat and can be adjusted between 45-130 kg. OPTIONS: The seats can be equipped with 24/48V electrical heating, 2-point safety belt and armrests. The low back can be equipped with manual operated air controlled lumbar support which is standard in the high back which also has headrest as an option. Backrest can be adjusted in five steps between 4-21. Seat cushion default angle is 5 degrees backwards. 8018 A can tilt the seat cushion in four steps from 5-12. Length adjustment 200 mm. Micro switch as standard. Headrest (option, only for high backrest) Armrest (option) Micro switch Adjustment of backrest five steps between 4-21 Manual operated air controlled lumbar support (standard in high backrest, option for low backrest) Weight adjustment 45-130 kg Length adjustment 200 mm Tilting of the seat cushion in four steps from 5-12 (8018 A only) Stepless 40 458 4 5 step 4,2 21 5 step 4,2 4 21 458 Slides 10 mm step 100 100 Slides 10 mm step 100 100 745 25 25 Suspension H-Point H-Point 25 25 Suspension H-Point H-Point 602 12 10 7 5 237 12 10 7 165 165 5 237 8018 has a 5 fixed tilt 8018 A can be tilted in four positions from 5 to 12. 32 32 201 606 8018 has a 5 fixed tilt 8018 A can be tilted in four positions from 5 to 12. 32 606 201 32 Be-Ge Industri AB Main Office Box 912, SE 572 29 Oskarshamn Phone: +46 (0)491-76 18 00 Homepage: www.be-ge.com Sweden Fax: +46 (0)491-819 00 e-mail: info@be-ge.se Be-Ge Seating UK Ltd. UK Sales Unit 3, The Fulcrum, Lows Lane, Phone: +44 844 800 0558 Homepage: www.be-ge.co.uk Stanton, Derbyshire, DE7 4QU Fax: +44 844 8000559
Be-Ge 8116/8416 8116 can be equipped with headrest Be-Ge 8116/8416 series are suspended driver seats with a low profile and tiltable seat cushions. The suspension unit is placed behind the seat and is weight adjustable. 8116, larger version The seat and back cushions are available in two different sizes, the 8116 is the larger version and the 8416 is the smaller version. The 16-series is suitable for forklifts and vehicles that demand high seating comfort, low profile and a robust construction. Service is easy made the cushions can be switched with an easy operation. 8416, smaller version
Be-Ge 8116/8416 The seats are mechanically suspended with the suspension unit behind the seat and stepless weight adjustment of 60 130 kg. The seat cushion can be tilted 7 in 3 steps and the back cushion can be adjusted 9 24 in the 8116 and 5 20 in the 8416, both in four steps. The length can be adjusted 160 mm. The seats fulfil the vibration norms according to EN1390 IT1 and IT2. With 2-point belt they also fulfil the FEM section IV for industrial fork lifters. OPTIONS: The seats can be equipped with electrical heating in 12V, 24V or 48V, 2-point waist belt with roll (electrical switch as extra option) or fixed belt. 81-16 can also be equipped with armrests and headrest (headrest demands preparation of back cushion from the factory). Stepless weight adjustment, 60 130 kg Tilting of seat cushion 7 in 3 steps Tilting of back cushion 9 24 in the 8116 and 5 20 in the 8416 Length adjustment 160 mm 430-450 175 50 Be-Ge 8116 Be-Ge 8416 9-24 430-450 145 5-20 1 1 6 6 5 25 25 225 50 100 3 7 150 355 2 520 5 25 25 225 3 7 50 100 150 355 2 425 105 4 Be-Ge Industri AB 55 135 1. Weight adjustment 2. Tilting of back cushion 9-24 in 4 steps 3. Tilting of seat cushion 7 in 3 steps 4. Length adjustment 5. Suspension stroke 6. H-point according to SS-EN ISO 5353 Box 912 SE-572 29 Oskarshamn, Sweden. Telephone +46 (0)491-761800. info@be-ge.se www.be-ge.com Telefax +46 (0)491-81900. 500 105 4 Be-Ge Seating UK Ltd 55 135 1. Weight adjustment 2. Tilting of back cushion 9-24 in 4 steps 3. Tilting of seat cushion 7 in 3 steps 4. Length adjustment 5. Suspension stroke 6. H-point according to SS-EN ISO 5353 Venture Center, Sir William Lyons Road UK-Coventry CV4 7EZ Phone: +44 844800 0558 Fax: +44 844800 0559 www.bege.co.uk 440 Risbergs Information & Media Oskarshamn 2006
Be-Ge 8652 8652/HBC, the driver seat with integrated head support. BE-GE 8652 are static driver seats suitable for e.g. buses and railway traffic. The basic model 8652 has a generous height adjustment of the backrest cushion, which is done with single lever, and length adjustment of the seat cushion. The lumbar support is infinitely adjustable, which provides a constant softness even when adjusted to its max point. The very popular bus seat 8652 with the accessories armrest and head rest. HBC-variant is with high backrest and integrated head support. This will give a complete support for the whole back, from the pelvis to the neck. Accessories like armrest, head rest, Be-Ge s well known Airvent, electrical heating, different kinds of turning devices etc are some of the equipments that makes the seat designed for each need. BE-GE, the name means a great deal: not at least comfort and quality, both physical and technical. Standard equipment is with Rotolift - a shock and damping base, height adjustable and rotation through both directions.
Be-Ge 8652/HBC Infinitely adjustable lumbar support Headrest infinitely adjustable in height (accessory) Length adjustment seat cushion, 100 mm Height adjustment of backrest cushion 120 mm Armrest (accessory) Length adjustment 200 mm Rotation brake Infinite angle adjustment of backrest 30 /35 Infinite adjustment of seat cushion angle 12 Infinite height adjustment 100 mm (Rotolift 3) Service control 5 190 150 350 25 431 531 635 755 2 1 70 427 572 155 845 965 (HBC-model) 128 184 244 12 240 87 287 1. SIP according to SS-ISO 5353 2. H-point according to ISO 6549 175 505 105 55 Length adjustment Be-Ge Industri AB Box 912, SE 572 29 Oskarshamn Phone: +46 (0)491-76 18 00 Fax: +46 (0)491-819 00 e-mail: info@be-ge.se Homepage: www.be-ge.com