Condulet Single Gang Cast Accessories Pages to 44 F Application: Cast device boxes are installed to: accommodate wiring devices act as pull boxes for conductors in a conduit system provide openings to make splices and taps in conductors provide access to conductors for maintenance and future system changes connect conduit sections FSY boxes for mounting surface devices on floor or bench (used with single gang covers) Features: Internal green ground screw standard on boxes Suitable for use in wet locations when used with gasketed covers Mounting lugs standard on most boxes Tapered threaded hubs (NPT) with integral bushing Available for surface mounting (with mounting lugs) or flush mounting (without mounting lugs) as listed Available as shallow (FS) or deep (FD) configuration. Use FD if device to be enclosed exceeds 1 in depth Ample wiring room provided in either FS or FD configuration Wide selection of surface or flush covers available in three materials (sheet steel, Feraloy, aluminum) Covers for flush mounting extend to conceal the rough plaster line Available in single gang and multi-gang configurations with hubs, and as blank bodies for drilled and tapped openings Standard Materials: Feraloy iron alloy or copper-free aluminum. Standard Finishes: Feraloy electrogalvanized and aluminum acrylic paint Aluminum natural Options: Finishes: Corro-free TM epoxy powder coat add suffix S2 Size Ranges: s to 1 Certifications and Compliances: UL Standard: 14 ANSI Standard: C.84 Fed. Spec.: W-C-860 CSA Standard: C22.2 No. 18 Die Cast Aluminum FS1* FD1** FSR1 FDR1 FS1-SA FSC1-SA FS2* FD2** FSR2 FDR2** FS2-SA FSC2-SA 1 FS** FD** FSC1* FDC1** FSL1 FDL1 FSC2* FDC2** FSL2 FDL2** 1 FSC** FDC** Mounting lugs and ground screw are not offered with standard die cast box add suffix SCA to Cat. No. for sand cast aluminum box with mounting lugs and ground screw. (Example: FS1-SCA) * Available in sandcast copper-free aluminum add suffix SCA to Cat. No. ** Available in sandcast copper-free aluminum add suffix SA to Cat. No. US: 1-866-64-44 CAN: 1-800-26-002 Copyright 2006 Cooper Crouse-Hinds 2
F Condulet Single Gang Cast Accessories Pages to 44 Cat. # FSA1 FDA1 FSA2 FDA2 Cat. # FSS1* FDD1 FSS2* FDD2* 1 FSS FDD FSCC1 FDCC1 FSCC2 FDCC2 FSCA1 FSCA2 FSSA2 FSLA1 FDLA1 FSLA2* FDLA2 Series Size a b c d FS 1 1 11 16 1 1 11 16 1 1 1 1 11 16 FD 2 11 16 2 2 11 16 2 1 1 2 11 16 2 * Available in copper-free aluminum; add suffix SA. Mounting lugs not available. 26 US: 1-866-64-44 CAN: 1-800-26-002 Copyright 2006 Cooper Crouse-Hinds
Condulet Single Gang Cast Accessories Pages to 44 F FS and FD FSCT1 FDCT1 FSCT2* FDCT2* 1 FSCT FDCT FST1* FDT1 FST2* FDT2 1 FDT FSY Description Single face 1 FSY11 Double face 1 FSY12 FSX1 FDX1 FSX2 FDX2 1 FDX 6 s all pipe tap. * Available in copper-free aluminum; add suffix SA. Not avaliable with mounting lugs. FSCD1 FSCD2 FDXC FSCT, FSX, FST, FSCD FSY FDXC FDXC219 FSCT, FSX, FST, FSCD Series Size a b c d FS 1 1 11 16 1 1 11 16 1 1 1 1 11 16 FSY Description Size a b Single gang, single face 1 2 1 1 16 Single gang, double face 1 2 US: 1-866-64-44 CAN: 1-800-26-002 Copyright 2006 Cooper Crouse-Hinds 2
F Condulet Single Gang Cast With and Without Mounting Lugs Accessories Pages to 44 FS Double Face FS12 FS22 Double Face FSC12 FSC22 Double face Series Size a b c FS 16 1 1 1 11 16 1 Mounting lugs not available. 28 US: 1-866-64-44 CAN: 1-800-26-002 Copyright 2006 Cooper Crouse-Hinds
Condulet Multi-Gang Cast Accessories Pages to 44 F FS Tandem FS1 FS2 FSC Tandem FSC1 FSC2 FS12* FD12 FS22* FD22* 1 FS2 FD2 FSC & FDC FSC12 FDC12 FSC222 FDC222* 1 FSC2 FDC2 FSE FSE22 * Available in copper-free aluminum; add suffix SA. Use single gang covers only. Two gang tandem Two gang Two gang tandem Series Size a d e FS 1 1 1 Two gang Series Size a b c d h FS 2 1 1 1 11 16 2 1 1 1 11 16 1 1 2 1 1 11 16 2 1 2 11 16 2 FD 2 1 2 11 16 2 1 1 2 2 11 16 2 US: 1-866-64-44 CAN: 1-800-26-002 Copyright 2006 Cooper Crouse-Hinds 29
F Condulet Multi-Gang Cast Accessories Pages to 44 FSS & FDS FSS222 FDS222 Three Gang FS2 FD2 1 FS FSD FSD212* FSS Three Gang FSS2 * s on 2 hub side are. Two gang with mounting lugs Three gang Three gang Series Size a c d 1 FS 1 11 16 1 1 1 1 11 16 FD 2 11 16 2 0 US: 1-866-64-44 CAN: 1-800-26-002 Copyright 2006 Cooper Crouse-Hinds