TS1.5 Flat Base Pole Spacing 8mm (.315) Mounting Hole Diameter 2.8mm (.110) Stripping Length 5mm (.197)

Similar documents
Two-Position Electric Duplex Room Thermostats

STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES

Specifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)

POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch

Roller and ball bars for easy and safe die change

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15

CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")

CCD-493 KIT SERIES INSTRUCTION SHEET

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL

203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

Lincoln Under-cabinet Light Installation Instructions

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS

COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION

OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION

(mω) 1. Temperature ( C) Voltage (V) ULRG1 /

CS 7780 FULL FUNCTION DRIVE-UP TERMINAL

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

FINGER STRIPS. and other EMI shielding products. Characteristics

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

DIESEL EGT GAUGE INSTALLATION INSTRUCTIONS P14D AA

Spring Return DuraDrive Two-Position Actuator

Energy Recovery Ventilator

Cable Trolleys for C-Rails Program

INSTALLATION GUIDE INSTALLATION GUIDE

DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7

* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

4%$ %%X 0RODUCT!PPLICATION 4HE "OTH 4%$ FOR 4%$ 80 DUSTTIGHT 2ATINGS

MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface.

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

Fire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance

Front Panel Service. Front panels are structural elements which need to be. Services in detail: designed individually depnding on the application.

DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor

HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version

2/2 Solenoid Operated Seat Valve, ISO Size 03

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)

Decor Radiators Baseboard

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.

E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

JS Series Sub-Miniature Slide Switches

drylin stainless steel Lubrication free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets

MN3GA1/2 Series. Internal structure and part list N3GA110/N3GA210 2-position single solenoid, normally closed grommet lead wire (blank)

BIMETAL-POINTER-THERMOMETER

Spark Plug Fouling 3.0 Liter OptiMax

Hazardous Location Push Button Specifications

Harmer Roof Drainage The Cast Iron Range

Solenoid Pilot Operated Directional Control Valve

Transmission and Driveline. Section 2A - Transmission and Driveline

Radiant Process Heaters. Gemini. Medium Wave Heaters Twin Bore Quartz Tube Technology

HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version

Commercial Condensing Units

Classic 9. Sliding Door Systems, C-Profile

Product range MEGAlife

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

PERSEUS MEDIUM PRESSURE PF61 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED WITH AEx (NEC 505) Exd, Exia & INDUSTRIAL PRESSURE SWITCH

UNIVERSAL ALUMINIUM CASE

UNEQUAL FLANGE RACK ACCESSORIES

drylin Stainless Steel Lubricant free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery

2/2 Solenoid Operated Seat Valve, ISO Size 03

PERSEUS ULTRA LOW PRESSURE

GUARDIAN VERTICAL MOUNTING

4/2- and 4/3-way shut-off valve

INSTALLATION GUIDE 4PK57SS15 SPACE SAVER PLUS PARTITION CURRENT TAHOE & 2016 SILVERADO. pro-gard.com STRONG RELIABLE SECURE

NET-ACCESS S TYPE VED READY CABINET 600mm WIDE X 1200mm DEEP FAMILY 12V343ST-DC VED TOP CAP FRONT PERFORATED SINGLE HINGE DOOR SPLIT SIDE PANEL

MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website.

Assembly instructions

Murtfeldt Internet Chain Tensioners for Roller Chains to DIN8187

Taxonomies, Classifications, and Categories THERMAL MAGNETIC, COMMON TRIP, EQUIPMENT PROTECTOR

HA series the slim connectors

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)

Cabin Heating & Ventilation Systems. Cabin Heating & Ventilation Systems Transportation Products... 25

631 ALLOWANES AND TOLERANCES

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

CCS-810 KIT SERIES INSTRUCTION SHEET

8060 Series Alternate Action and Momentary Pushbutton Switches

Varispeed E7 CIMR-E7Z. System Configuration

THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.

CC-410 KIT SERIES INSTRUCTION SHEET

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:

Conversion to 235/45 R 17 tyres and 8 J x 17 H 2 ET 28 disk wheel 40.01

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D

Georg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint

D Power Units in Modular Design Operating pressure 30 to 500 bar, flow rate 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l

MINI COMBICON Double-Level Headers for Through Hole Reflow Processes, MCDN 1,5/ 3.5 mm Pitch

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts

January per. White. Pap. systems. Abstract. look and. Page 1/6

Transcription:

-TRU T S URSTRPS 300V - Pnel ount or wire-to-wire connections in V, pplince, equipment, power distribution nd other industril pplictions with strict budget nd spce requirements. sy to use double row terminl strips re cost-effective lterntive to brrier strips or other types of terminl blocks. Simply strip the wire, insert, nd tighten the screw. urostrips feture tubulr screw clmps, with or without wire protectors, nd recessed metl prts for finger protection. The wire protectors include n integrl wire stop in the center of the terminl. The stinless steel wire protectors exhibit excellent memory nd the wire stop insures the most effective connection. urostrips described on this nd the following pge re vilble with flt bse for minimum clernce pplictions. They cn be pnel mounted or left to free flot. ffered in esy to cut stndrd 12 pole strips, they cn lso be ordered precut with the required number of poles. Tubulr Screw lmp With or Without Wire Protectors Pnel ount or ree lot ousing teril: Polymide 6.6 olor: pque White rking Pltes or ctory mprinted TS1.5 lt se Pole Spcing 8mm (.315) ounting ole imeter 2.8mm (.110) Stripping ength 5mm (.197) TS2.5 lt se Pole Spcing 10mm (.394) ounting ole imeter 3.5mm (.138) Stripping ength 6mm (.236) Rtings /V (ile o. 148805) (ile o. R38962) Wire Rnge urrent Voltge Wire Rnge urrent Voltge 1.5mm 2 18 380V 2.5mm 2 26 380V 22-12 W 20 300V 22-10 W 30 300V 22-16 W 15 300V 18-12 W 30 300V o. of ength () Std. ength () Std. rdering nformtion Poles Type t. o. mm (in.) Pk. Type t. o. mm (in.) Pk. urostrip, lt se 2 TS1.5/2wp 40.002 13.6 (.53) 100 TS2.5/2wp 40.202 17.0 (.67) 100 with Wire Protector 3 TS1.5/3wp 40.003 21.5 (.85) 100 TS2.5/3wp 40.203 27.0 (1.06) 100 4 TS1.5/4wp 40.004 29.5 (1.16) 100 TS2.5/4wp 40.204 37.0 (1.46) 100 5 TS1.5/5wp 40.005 37.4 (1.47) 100 TS2.5/5wp 40.205 47.0 (1.85) 100 6 TS1.5/6wp 40.006 45.4 (1.79) 50 TS2.5/6wp 40.206 57.0 (2.24) 50 7 TS1.5/7wp 40.007 53.3 (2.10) 50 TS2.5/7wp 40.207 67.0 (2.64) 50 8 TS1.5/8wp 40.008 61.3 (2.41) 50 TS2.5/8wp 40.208 77.0 (3.03) 50 9 TS1.5/9wp 40.009 69.2 (2.72) 50 TS2.5/9wp 40.209 87.0 (3.43) 50 10 TS1.5/10wp 40.010 77.2 (3.04) 50 TS2.5/10wp 40.210 97.0 (3.82) 50 11 TS1.5/11wp 40.011 85.1 (3.35) 50 TS2.5/11wp 40.211 107.0 (4.21) 50 12 TS1.5/12wp 40.012 93.0 (3.66) 50 TS2.5/12wp 40.212 117.0 (4.61) 50 urostrip, lt se 2 TS1.5/2 40.052 13.6 (.53) 100 TS2.5/2 40.252 17.0 (.67) 100 without Wire Protector b 3 TS1.5/3 40.053 21.5 (.85) 100 TS2.5/3 40.253 27.0 (1.06) 100 4 TS1.5/4 40.054 29.5 (1.16) 100 TS2.5/4 40.254 37.0 (1.46) 100 5 TS1.5/5 40.055 37.4 (1.47) 100 TS2.5/5 40.255 47.0 (1.85) 100 6 TS1.5/6 40.056 45.4 (1.79) 50 TS2.5/6 40.256 57.0 (2.24) 50 7 TS1.5/7 40.057 53.3 (2.10) 50 TS2.5/7 40.257 67.0 (2.64) 50 8 TS1.5/8 40.058 61.3 (2.41) 50 TS2.5/8 40.258 77.0 (3.03) 50 9 TS1.5/9 40.059 69.2 (2.72) 50 TS2.5/9 40.259 87.0 (3.43) 50 10 TS1.5/10 40.060 77.2 (3.04) 50 TS2.5/10 40.260 97.0 (3.82) 50 11 TS1.5/11 40.061 85.1 (3.35) 50 TS2.5/11 40.261 107.0 (4.21) 50 12 TS1.5/12 40.062 93.0 (3.66) 50 TS2.5/12 40.262 117.0 (4.61) 50 or ccessories, plese refer to pges 50, 51 lmp screws re zinc chromted steel. Stinless steel or nickle plted brss screws re vilble, consult ltech for ordering informtion. b for solid wire or wire with ferrule. = 8.0 (.315) = Ø2.8 (.110) = 2.5(.099) = 2.5 x 4.3 = Ø5.35 (.211) = 7.5 (.2.96) = 5.6 (.221) = 8.0 (.315) = 6.7 (.264) = 2.4 (.095) = Ø3.0 (.118) = 13.7 (.540) = 18.2 (.716) = 10.0 (.394) = Ø3.5 (.137) = 3.0 (.118) = 3 x 5.8 = Ø5.7 (.225) = 9.5 (.374) = 6.4 (.252) = 10.0 (.394) = 8.0 (.315) = 3.5 (.138) = Ø3.6 (.142) = 15.5 (.611) = 21.8 (.858) 44 ltech orp. 35 Royl Rod lemington 08822-6000 Phone (908) 806-9400 x (908) 806-9490

TS6 lt se Pole Spcing 12mm (.472) ounting ole imeter 4.2mm (.165) Stripping ength 7mm (.276) Wire Rnge urrent Voltge 6mm 2 44 380V 20-8 W 40 300V 18-10 W 40 300V t. ength () Std. Type o. mm (in.) Pk. TS6/2wp 40.402 20.0 (.79) 100 TS6/3wp 40.403 32.0 (1.26) 100 TS6/4wp 40.404 44.0 (1.73) 100 TS6/5wp 40.405 56.0 (2.21) 100 TS6/6wp 40.406 68.0 (2.68) 50 TS6/7wp 40.407 80.0 (3.15) 50 TS6/8wp 40.408 92.0 (3.62) 50 TS6/9wp 40.409 104.0 (4.10) 50 TS6/10wp 40.410 116.0 (4.57) 25 TS6/11wp 40.411 128.0 (5.03) 25 TS6/12wp 40.412 140.0 (5.51) 25 TS6/2 40.452 20.0 (.79) 100 TS6/3 40.453 32.0 (1.26) 100 TS6/4 40.454 44.0 (1.73) 100 TS6/5 40.455 56.0 (2.21) 100 TS6/6 40.456 68.0 (2.68) 50 TS6/7 40.457 80.0 (3.15) 50 TS6/8 40.458 92.0 (3.62) 50 TS6/9 40.459 104.0 (4.10) 50 TS6/10 40.460 116.0 (4.57) 25 TS6/11 40.461 128.0 (5.03) 25 TS6/12 40.462 140.0 (5.51) 25 = 12.0 (.472) = Ø4.4 (.173) = 4.3 (.169) = 3.5 x 7 = Ø6.8 (.268) = 9.5 (.374) = 7.6 (.299) = 12.0 (.472) = 9.0 (.354) = 4.3 (.169) = Ø4.2 (.165) = 17.7 (.697) = 23.0 (.906) ltech orp. 35 Royl Rod lemington 08822-6000 Phone (908) 806-9400 x (908) 806-9490 45

-TRU URSTRPS 300V nd 600V Stndoff eet Pnel ount or wire-to-wire connections in V, pplince, equipment, power distribution nd other industril pplictions with restricted budget nd spce requirements. sy to use double row terminl strips re cost-effective lterntive to brrier strips or other types of terminl blocks. Simply strip the wire, insert, nd tighten the screw. urostrips feture tubulr screw clmps, with or without wire protectors, nd recessed screws nd contcts to prevent shocks nd shorts. The wire protectors include n integrl wire stop in the center of the terminl. The stinless steel wire protectors exhibit excellent memory nd the wire stop insures the most efficient connection. urostrips described on this nd the following pge re vilble with stndoff feet for incresed wiring efficiency. They cn be pnel mounted or left to free flot. ffered in esy to cut 12 pole strips, they cn lso be ordered precut with the required number of poles. Tubulr Screw lmp With or Without Wire Protectors Pnel ount or ree lot ousing teril: Polymide 6.6 olor: pque White rking Pltes or ctory mprinted TS1.5 Stndoff eet Pole Spcing 8mm (.315) ounting ole imeter 2.8mm (.110) Stripping ength 5mm (.197) TS2.5 Stndoff eet Pole Spcing 10mm (.394) ounting ole imeter 3.5mm (.138) Stripping ength 6mm (.236) Rtings /V (ile o. 148805) (ile o. R38962) o. of ength () Std. ength () Std. rdering nformtion Poles Type t. o. mm (in.) Pk. Type t. o. mm (in.) Pk. urostrip, Stndoff eet 2 TS1.5/2wp 40.102 13.6 (.53) 100 TS2.5/2wp 40.302 17.0 (.67) 100 with Wire Protector 3 TS1.5/3wp 40.103 21.5 (.85) 100 TS2.5/3wp 40.303 27.0 (1.06) 100 4 TS1.5/4wp 40.104 29.5 (1.16) 100 TS2.5/4wp 40.304 37.0 (1.46) 100 5 TS1.5/5wp 40.105 37.4 (1.47) 100 TS2.5/5wp 40.305 47.0 (1.85) 100 6 TS1.5/6wp 40.106 45.4 (1.79) 50 TS2.5/6wp 40.306 57.0 (2.24) 50 7 TS1.5/7wp 40.107 53.3 (2.10) 50 TS2.5/7wp 40.307 67.0 (2.64) 50 8 TS1.5/8wp 40.108 61.3 (2.41) 50 TS2.5/8wp 40.308 77.0 (3.03) 50 9 TS1.5/9wp 40.109 69.2 (2.72) 50 TS2.5/9wp 40.309 87.0 (3.43) 50 10 TS1.5/10wp 40.110 77.2 (3.04) 50 TS2.5/10wp 40.310 97.0 (3.82) 50 11 TS1.5/11wp 40.111 85.1 (3.35) 50 TS2.5/11wp 40.311 107.0 (4.21) 50 12 TS1.5/12wp 40.112 93.0 (3.66) 50 TS2.5/12wp 40.312 117.0 (4.61) 50 urostrip, Stndoff eet 2 TS1.5/2 40.152 13.6 (.53) 100 TS2.5/2 40.352 17.0 (.67) 100 without Wire Protector b 3 TS1.5/3 40.153 21.5 (.85) 100 TS2.5/3 40.353 27.0 (1.06) 100 4 TS1.5/4 40.154 29.5 (1.16) 100 TS2.5/4 40.354 37.0 (1.46) 100 5 TS1.5/5 40.155 37.4 (1.47) 100 TS2.5/5 40.355 47.0 (1.85) 50 6 TS1.5/6 40.156 45.4 (1.79) 50 TS2.5/6 40.356 57.0 (2.24) 50 7 TS1.5/7 40.157 53.3 (2.10) 50 TS2.5/7 40.357 67.0 (2.64) 50 8 TS1.5/8 40.158 61.3 (2.41) 50 TS2.5/8 40.358 77.0 (3.03) 50 9 TS1.5/9 40.159 69.2 (2.72) 50 TS2.5/9 40.359 87.0 (3.43) 50 10 TS1.5/10 40.160 77.2 (3.04) 50 TS2.5/10 40.360 97.0 (3.82) 50 11 TS1.5/11 40.161 85.1 (3.35) 50 TS2.5/11 40.361 107.0 (4.21) 50 12 TS1.5/12 40.162 93.0 (3.66) 50 TS2.5/12 40.362 117.0 (4.61) 50 or ccessories, plese refer to pges 50, 51 lmp screws re zinc chromted steel. Stinless steel or nickle plted brss screws re vilble, consult ltech for ordering informtion. b for solid wire or wire with ferrule. 46 Wire Rnge urrent Voltge Wire Rnge urrent Voltge 1.5mm 2 18 380V 2.5mm 2 26 380V 22-12 W 20 600V 22-10 W 30 600V 22-16 W 15 300V 18-12 W 30 600V = 8.0 (.315) = Ø2.8 (.110) = 7.5 (.296) = 2.5 x 4.3 = Ø5.35 (.211) = 10.1 (.398) = 5.6 (.221) = 8.0 (.315) = 17.0 (.670) = 2.4 (.095) = Ø3.0 (.118) = 18.2 (.716) = 6.1 (.240) = 12.0 (.472) =10.0 (.394) = Ø3.5 (.138) = 9.5 (.374) = 3 x 5.8 = Ø5.7 (.225) = 12.0 (.472) = 6.4 (.252) = 10.0 (.394) = 19.4 (.764) = 3.5 (.138) = Ø3.6 (.142) = 22.3 (.879) = 7.4 (.292) 0 = 14.0 (.552) ltech orp. 35 Royl Rod lemington 08822-6000 Phone (908) 806-9400 x (908) 806-9490

TS6 Stndoff eet Pole Spcing 12mm (.472) ounting ole imeter 4.2mm (.165) Stripping ength 7mm (.276) TS16 Stndoff eet Pole Spcing 15.1mm (.595) ounting ole imeter 4.0mm (.157) Stripping ength 8mm (.315) Wire Rnge urrent Voltge Wire Rnge urrent Voltge 6mm 2 44 380V 16mm 2 82 660V 20-8 W 40 600V 14-6 W 63 600V 18-10 W 40 600V 18-6 W 65 600V ength () Std. ength () Std. Type t. o. mm (in.) Pk. Type t. o. mm (in.) Pk. TS6/2wp 40.502 20.0 (.79) 100 TS16/2wp 40.702 25.0 (.98) 40 TS6/3wp 40.503 32.0 (1.26) 100 TS16/3wp 40.703 40.0 (1.58) 40 TS6/4wp 40.504 44.0 (1.73) 100 TS16/4wp 40.704 55.0 (2.17) 40 TS6/5wp 40.505 56.0 (2.21) 100 TS16/5wp 40.705 70.5 (2.28) 40 TS6/6wp 40.506 68.0 (2.68) 50 TS16/6wp 40.706 86.0 (3.39) 20 TS6/7wp 40.507 80.0 (3.15) 50 TS16/7wp 40.707 101.0 (3.98) 20 TS6/8wp 40.508 92.0 (3.62) 50 TS16/8wp 40.708 116.0 (4.57) 20 TS6/9wp 40.509 104.0 (4.10) 50 TS16/9wp 40.709 131.0 (5.16) 10 TS6/10wp 40.510 116.0 (4.57) 25 TS16/10wp 40.710 146.0 (5.75) 10 TS6/11wp 40.511 128.0 (5.03) 25 TS16/11wp 40.711 161.0 (6.34) 10 TS6/12wp 40.512 140.0 (5.51) 25 TS16/12wp 40.712 176.0 (6.93) 10 TS6/2 40.552 20.0 (.79) 100 TS16/2 40.752 25.0 (.98) 40 TS6/3 40.553 32.0 (1.26) 100 TS16/3 40.753 40.0 (1.58) 40 TS6/4 40.554 44.0 (1.73) 100 TS16/4 40.754 55.0 (2.17) 40 TS6/5 40.555 56.0 (2.21) 100 TS16/5 40.755 70.5 (2.28) 40 TS6/6 40.556 68.0 (2.68) 50 TS16/6 40.756 86.0 (3.39) 20 TS6/7 40.557 80.0 (3.15) 50 TS16/7 40.757 101.0 (3.98) 20 TS6/8 40.558 92.0 (3.62) 50 TS16/8 40.758 116.0 (4.57) 20 TS6/9 40.559 104.0 (4.10) 50 TS16/9 40.759 131.0 (5.16) 10 TS6/10 40.560 116.0 (4.57) 25 TS16/10 40.760 146.0 (5.75) 10 TS6/11 40.561 128.0 (5.03) 25 TS16/11 40.761 161.0 (6.34) 10 TS6/12 40.562 140.0 (5.51) 25 TS16/12 40.762 176.0 (6.93) 10 =12.0 (.472) = Ø4.4 (.173) = 9.6 (.378) = 3.5 x 7 = Ø6.8 (.268) = 12.5 (.492) = 7.6 (.299) = 12.0 (.472) = 20.9 (.823) = 4.3 (.169) = 4.2 (.165) = 23.0 (.906) = 8.5 (.335) = 15.8 (.622) =15.1 (.595) = Ø4.2 (.165) = 11.0 (.433) = 5 x 8 = Ø8.0 (.315) = 16.5 (.650) = 9.6 (.378) = 15.1 (.595) = 25.8 (1.017) = 5.4 (.213) = Ø6.0 (.236) = 26.3 (1.035) = 10.4 (.410) 0 = 15.1 (.595) ltech orp. 35 Royl Rod lemington 08822-6000 Phone (908) 806-9400 x (908) 806-9490 47

PU URSTRPS 300 V - Pnel ount or wire-to-wire connections in V, pplince, equipment, power nd other distribution pplictions. Pluggble urostrips speed nd simplify replcement of subssemblies, etc. They reduce downtime nd misconnections. Two-piece pluggble terminl strips feture tubulr screw clmps, with or without wire protectors, nd recessed metl prts for finger protection. spring loded contct prevents indvertnt unplugging. The heders nd plugs hve stndoff feet for incresed ccessibility nd cn be pnel mounted or free flot. ffered in esy to cut 12 pole strips, they cn lso be ordered precut with the required number of poles. Tubulr Screw lmp opper lloy Wire Protectors Pnel ount or ree lot ousing teril: Polymide 6.6 olor: pque White Rtings /V (ile o. 103245) 6.8mm (.268 in.) (.382 in.) (.382) 3.3mm (.130 in.) 3.8mm (.150 in.) 3.4mm (.134 in.) 3 x 5.8 mm 5.9mm (.232 in.) TSP2.5 PU Stndoff eet Pole Spcing 10mm (.394) ounting ole imeter 3.5mm (.138) Stripping ength 6mm (.236) 6.6mm (.260 in.) 8.1mm (.319) 9.4mm (.370 in.) 8.4mm (.331) 13.1mm (.516) 11.8mm (.465) 18.6mm (.733 in.) TS2.5 R Stndoff eet Pole Spcing 10mm (.394) ounting ole imeter 3.5mm (.138) Stripping ength 6mm (.236) Wire Rnge urrent Voltge Wire Rnge urrent Voltge 2.5mm 2 16 380V 2.5mm 2 16 380V 20-12 W 13 300V 20-12 W 13 300V 6.8mm (.268 in.) (.382 in.) (.382) 3.3mm (.130 in.) 3.8mm (.150 in.) 3.4mm (.134 in.) 3 x 5.8 mm 5.8mm (.232 in.) 6.6mm (.260 in.) 12.0mm (.473 in.) 9.5mm (.374 in.) 12.0mm (.473) 17.5mm (.690) 18.9mm (.745 in.) o. of t. ength () Std. t. ength () Std. rdering nformtion Poles Type o. mm (in.) Pk. Type o. mm (in.) Pk. urostrip Plug 2 TSP2.5/2wp 40.802 17.0 (.67) 50 TS2.5/2wp 40.902 17.0 (.67) 50 with Wire Protector 3 TSP2.5/3wp 40.803 27.0 (1.06) 50 TS2.5/3wp 40.903 27.0 (1.06) 50 4 TSP2.5/4wp 40.804 37.0 (1.46) 50 TS2.5/4wp 40.904 37.0 (1.46) 50 urostrip eder 5 TSP2.5/5wp 40.805 47.0 (1.85) 50 TS2.5/5wp 40.905 47.0 (1.85) 50 with Wire Protector 6 TSP2.5/6wp 40.806 57.0 (2.24) 25 TS2.5/6wp 40.906 57.0 (2.24) 25 7 TSP2.5/7wp 40.807 67.0 (2.64) 25 TS2.5/7wp 40.907 67.0 (2.64) 25 8 TSP2.5/8wp 40.808 77.0 (3.03) 25 TS2.5/8wp 40.908 77.0 (3.03) 25 9 TSP2.5/9wp 40.809 87.0 (3.43) 25 TS2.5/9wp 40.909 87.0 (3.43) 25 10 TSP2.5/10wp 40.810 97.0 (3.82) 10 TS2.5/10wp 40.910 97.0 (3.82) 10 11 TSP2.5/11wp 40.811 107.0 (4.21) 10 TS2.5/11wp 40.911 107.0 (4.21) 10 12 TSP2.5/12wp 40.812 117.0 (4.61) 10 TS2.5/12wp 40.912 117.0 (4.61) 10 urostrip Plug 2 TSP2.5/2 40.852 17.0 (.67) 50 TS2.5/2 40.952 17.0 (.67) 50 without Wire Protector 3 TSP2.5/3 40.853 27.0 (1.06) 50 TS2.5/3 40.953 27.0 (1.06) 50 4 TSP2.5/4 40.854 37.0 (1.46) 50 TS2.5/4 40.954 37.0 (1.46) 50 urostrip eder 5 TSP2.5/5 40.855 47.0 (1.85) 50 TS2.5/5 40.955 47.0 (1.85) 50 without Wire Protector 6 TSP2.5/6 40.856 57.0 (2.24) 25 TS2.5/6 40.956 57.0 (2.24) 25 7 TSP2.5/7 40.857 67.0 (2.64) 25 TS2.5/7 40.957 67.0 (2.64) 25 8 TSP2.5/8 40.858 77.0 (3.03) 25 TS2.5/8 40.958 77.0 (3.03) 25 9 TSP2.5/9 40.859 87.0 (3.43) 25 TS2.5/9 40.959 87.0 (3.43) 25 10 TSP2.5/10 40.860 97.0 (3.82) 10 TS2.5/10 40.960 97.0 (3.82) 10 11 TSP2.5/11 40.861 107.0 (4.21) 10 TS2.5/11 40.961 107.0 (4.21) 10 12 TSP2.5/12 40.862 117.0 (4.61) 10 TS2.5/12 40.962 117.0 (4.61) 10 for solid wire or wire with ferrule. 48 ltech orp. 35 Royl Rod lemington 08822-6000 Phone (908) 806-9400 x (908) 806-9490

URSTRP SSRS onvenient options tht fcilitte instlltion nd wire termintion. XTR UPRS us potentils between poles on urostrip Terminl Strips reducing wiring time nd eliminting wire jumpers. umper Pole positions my be removed to provide selective jumpering. When using externl jumpers, the terminl's rted cross section is usully reduced one wire size. or umper mximum current rtings, refer to the corresponding urostrip /V current rting. teril: etl-opper lloy, ickel Plte nsultion: Polymide 6.6 olor: lck. ST PRTTS soltion Prtition provides seprtion between djcent poles of different potentils on 600V urostrips with stndoff feet. Visul seprtion between poles is lso provided by n soltion Prtition, ssisting circuit identifiction nd incresing wiring efficiency. teril: Polymide 6.6; olor: lck. UT PS Speed pnel mounting of urostrips with ounting Pins. Simply mtch drill clernce hole in pnel, position urostrip nd instll ounting Pin through hole nd into mounting hole in urostrip housing. nce pin psses beyond urostrip housing, it utomticlly expnds, securing housing to pnel. two or more ounting Pins per urostrip. teril: Polycetl; olor: 46 lck, 16 ry R PTS nstll rking Plte P under or on top of urostrip housing to identify individul pole positions to increse wiring efficiency, sve instlltion time nd fcilitte wire hook-up, system modifiction nd trouble shooting. Select blnk rking Plte for hnd mrking or imprinted. teril: Self-extinguishing PV; olor: White with lck mprint. PRT rk individul pole positions to sve instlltion time nd fcilitte wire hook-up, system modifiction nd trouble shooting. hoose turret or ledge mrking for optimum identifiction. To order mprinting specify consecutive, identicl or custom chrcter imprints; nd mrking loction - Turret (T) or edge (). mprints: Rub-Resistnt, lck nk. See exmples on fcing pges. Q XTR UPRS o. of Poles, With Type t. o. Pole Spcing Types Q1.5/2 41.442 2 pole, 8mm (.315) TS1.5, TS1.5 Q1.5/3 41.443 3 pole, 8mm (.315) Q1.5/4 41.444 4 pole, 8mm (.315) Q1.5/12 41.452 12 pole, 8mm (.315) Q2.5/2 41.462 2 pole, 10mm (.394) TS2.5, TS2.5, TSP2.5, TS2.5 Q2.5/3 41.463 3 pole, 10mm (.394) Q2.5/4 41.464 4 pole, 10mm (.394) Q2.5/12 41.472 12 pole, 10mm (.394) Q6/2 41.482 2 pole, 12mm (.472) TS6.0, TS6.0 Q6/3 41.483 3 pole, 12mm (.472) Q6/4 41.484 4 pole, 12mm (.472) Q6/12 41.492 12 pole, 12mm (.472) Q16/2 41.502 2 pole, 15mm (.591) TS16 Q16/3 41.503 3 pole, 15mm (.591) Q16/4 41.504 4 pole, 15mm (.591) Q16/12 41.512 12pole, 15mm (.591) Std. Pk.: 2 pole - 20 3 pole - 20 4 pole - 20 12 pole - 5 ther pole positions vilble, consult ltech. ST PRTT Thickness With Type t. o. mm (in.) Types 46 41.410 3.4 (.134) TS2.5, TS6 Std. Pk.: 5 45mm (1.77 in.) 20 mm (.79 in.) 50 ltech orp. 35 Royl Rod lemington 08822-6000 Phone (908) 806-9400 x (908) 806-9490

edge oction UT PS P R PTS PRT Turret oction Pnel Thickness With Type t. o. mm (in.) Types With Type t. o. escription* Types Type t. o. 46 41.420 0.8-1.7 TS2.5 (.031-.067) TS6 16 41.421 1.0-2.1 TS16 (.039 -.083) Std. Pk.: 50 P2.5 41.200 lnk TS2.5, TS2.5 P6 41.400 lnk TS6, TS6 P10 41.600 lnk TS16 P2.5 41.201 onsecutive TS2.5, os. 1-12 TS2.5 P6 41.401 onsecutive TS6, os. 1-12 TS6 P10 41.601 onsecutive TS16 os. 1-12 P2.5 41.202 onsecutive TS2.5, os. 13-24 TS2.5 P6 41.402 onsecutive TS6, os. 13-24 TS6 P10 41.602 onsecutive TS16 os. 13-24 Std. Pk.: 25 The following re listed s exmples: TS1.5/12wp-i(1-12)T 40.012i(1-12)T rking nstruction: onsecutive, imprint 1 through 12, Turret oction TS2.5/12wp-i(1) 40.212i(1) rking nstruction: denticl, imprint 1, edge oction Std. Pk.: 1000 Ø W ounting Pin nsertion* Pnel Width Pin Type eight () ength () ole i. (W) 46 21.5 (.85) 14.5 (.57) 4.5 (.18) 13.0 (.51) 16 24.5 (.96) 19.0 (.75) 5.5 (.22) 13.0 (.51) *urostrip housing thickness nd pnel thickness. * ustom mprints vilble, plese consult ltech ltech orp. 35 Royl Rod lemington 08822-6000 Phone (908) 806-9400 x (908) 806-9490 51