BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent performance. The V6 is available in 1.5 hp through 7.5 hp models. The V6 is available in 3 hp through 7.5 hp models. Features: Heavy-duty cast iron discharge housing and motor bracket for long life. Stainless steel shell, shaft coupling and pump shaft for increased durability. Top access to mechanical seal for easy replacement of seal without disturbing the plumbing or disassembling the pump. Standard thrust motors which are available through normal distribution channels. High flow impellers and stages are glass-filled Noryl for added durability and strength. Unique design allowing rotation of either suction or discharge in 9 degree increments for optimum installation flexibility. Tie-rod construction for easy disassembly and service to impeller stack. Maximum water temperature is 12 F / 49 C. Maximum operating pressure is 1 psi. 2" NPT suction x 2" NPT discharge. Noryl is a registered trademark of G.E. 1
Dimensional Drawings: 2 NPT DISCHARGE 9-3/16 7-11/16 B C BASE FOOTPRINT A 2 NPT SUCTION 19/32 2-13/16 gpm gpm A B C 1-Phase 3-Phase 1-Phase 3-Phase 1-Phase 3-Phase 1.5 1.94" 1.94" 16.51" 16.51" 27.4" 26.44" 2 12.56" 12.56" 18.13" 18.13" 28.66" 28.6" 3 14.18" 14.18" 19." 19." 3.95" 3.2" 5 19.5" 19.5".43".43" 38.32" 38.32" 7.5 N/A 23.92" N/A 3.3" N/A 46.24" A B C 1-Phase 3-Phase 1-Phase 3-Phase 1-Phase 3-Phase 3 1.94" 1.94" 14.88" 14.88" 27.7" 26.95" 5 14.18" 14.18" 19." 19." 32.64" 32.64" 7.5 N/A 17.43" N/A 23.81" N/A 39." Note: Shaft turns counterclockwise if viewed from above motor. 2
Ordering Information: GPM V6 Vertical Booster Pumps with Open Drip Proof Motors Single-phase Three-phase - 28-23/46 V Model No. Order No. Wt. Model No. Order No. Wt. 1.5 15FVB6P-2-S 9133915 1 15FVB6P-2-T 9134913 13 2 2FVB6P-3-S 9133923 15 2FVB6P-3-T 9133964 18 3 3FVB6P-4-S 9133931 19 3FVB6P-4-T 9133972 112 5 5FVB6P-7-S 913431 28 5FVB6P-7-T 9134327 188 7.5 Not Available in Single-Phase FVB6P-1-T 9134293 2 3 3FVB6P-2-S 9134244 16 3FVB6P-2-T 91341 18 5 5FVB6P-4-S 91343 28 5FVB6P-4-T 9134368 182 7.5 Not Available in Single-Phase FVB6P-6-T 9134269 222 Note: Single-phase 1/3-2 hp motors rated 115/23 V. Single-phase 3-5 hp motors rated 23 V. Three-phase motors rated 28-23/46 V. 1.5-7.5 V6 Series Booster Pump Ends GPM Pump Ends Only Model No. Order No. Wt. 1.5 15FVB6P-2 913453 65 2 2FVB6P-3 913461 72 3 3FVB6P-4 913479 74 5 5FVB6P-7 9134335 89 7.5 FVB6P-1 9134343 95 3 3FVB6P-2 9134277 7 5 5FVB6P-4 9134376 Note: Weight in pounds. 7.5 FVB6P-6 9134285 84 3
Exploded Parts Drawing: 32 2 16 19 2,3 &4 9 & 1 1 35 22 26 13 5 24 11 2 36 (Module) 14 8 35 17 21 32 16 2,3 &4 9 & 1 15 12 31 17 7 33 13 19 18 34 22 15 24 11 31 17 4
Materials and Parts: Figure No. Part Description Part No. 1 Motor See Replacement Motor Page in Catalog 2 77-9-1-R Motor Coupling 56C / 14TC w/5/16 setscrews 3 77-76-8-R Motor Coupling 18TC 1-1/2 B w/3/8 setscrews 4 77-761-7-R Motor Coupling 21TC w/3/8-16 x 1/2 setscrews 5 4-5594-7-R Motor Bracket #1145 6,7 14-444-4K *Fastener Kit 8 8-2938-5-R Sleeve 5/8 x 7/8" x 1-5/8" 9,1,11 14-444-4K *Fastener Kit 12,13,14 Tie Rods, Shaft, Shell, - Consult factory for size & availability 15 8-2912-5-R Ceramic Sleeves (5 each required) 1 x 5/8 Hex 16,17 14-444-4K *Fastener Kit 18 8-2771-5-R Rubber Bearing 19 47-247-8-2PK Shell O-Ring (2 per kit) 4-5/8 x 4-7/8 x 1/8 BN 2 8-2772-4-R Spacer V6 - V6 21 14-444-4K *Fastener Kit 22 1-369-3 Mechanical Seal 1PSI 1-1/4" 1-47-1 Mechanical Seal 4PSI 1-1/4" 23 4-5595-6-R VB6 Base 2 NPT #1144 24 14-444-4K *Fastener Kit 47-113-9-2PK Shaft O-Ring Kit 9/16 x 3/4 x 3/32 (2 per kit) 26 11-1514-4-R Motor adapter flange 18TC thru 21TC frame w/fasteners #11414 27 14-444-4-K *Fastener Kit 28 31-59-11-6PK Plug Kit 1/4" (6 per kit) 29 31-61-17-R Plug 1/2" 31 14-4277-2-R Washer 1 x 7/16 x.15 32 14-444-4K *Fastener Kit 33 11-1515-3-R Seal Plate 34 47-138-59-2PK Seal Plate Square-Ring Kit 2-1/8 x 3/32 x 3/32 BN (2 per kit) 4-5646-5 Stage Assembly V6 35 4-5649-2 Stage Assembly V6 4-5764-9 V6 End-Play Tool 9132-4517 VB6 1.5 hp 2 Stages 9132-45 VB6 2 hp 3 Stages 9132-4533 VB6 3 hp 4 Stages 36 9132-4541 VB6 5 hp 7 Stages 9132-4566 VB6 7.5 hp 1 Stages 9132-4582 VB6 3 hp 2 Stages 9132-459 VB6 5 hp 4 Stages 9132-4616 VB6 7.5 hp 6 Stages *Fastener Kit #144444K includes the following: 4 each 3/8-16 x 1 PL. Hex Capscrews #6 4 each 1/4-2 x 1/2 SS Hex Capscrews #7 3 each 3/8-16 x 1/2 Set Screws #9 3 each 5/16-18 x 1/2 Set Screws #1 1 each Washer SS #11 6 each 3/8-16 PL. Hex Nut #17 4 each 3/8 Lockwashers #21 1 each Washer 13/16 x 21/64 x 1/4 SS #16 4 each 1/2-13 x 1 PL. Hex Capscrews #27 1 each Retainer Ring #24 1 each 5/16-24 x 1 Capscrew #32 5
gpm Performance Curves: PSI 2 2 2 1 1 1 1 TOTAL HEAD - FEET 7.5 hp 5 4 4 5 hp 3 3 2 3 hp 2 2 hp 1 1.5 hp 1 1 2 3 4 6 7 8 6 4 3 2 1 NPSHR EFFICIENCY % CAPACITY - GALLONS PER MINUTE Discharge Pressure at Pump with No Lift (Capacities in Gallons per Minute) 1 2 3 4 6 7 8 9 1 11 12 13 14 1 16 17 18 19 2 21 22 23 1.5 82 7 56 34 46 2 8 72 62 35 69 3 78 72 65 57 47 35 18 95 Max Pres. (PSI) 5 79 71 67 63 6 54 48 42 35 1 165 7.5 79 77 74 71 68 65 62 59 55 51 47 43 38 31 17 238 Notes: 1. Total discharge pressure of 1.5 thru 5 hp. V6 Series units should not exceed 1 psi. 2. Total discharge pressure of FVB6P units should not exceed 4 psi. 6
gpm Performance Curves: PSI 1 1 1 TOTAL HEAD - FEET 3 7.5 hp 3 3 2 2 2 5 hp 2 1 1 1 3 hp 1 1 2 3 4 6 7 8 9 1 11 CAPACITY - GALLONS PER MINUTE 6 4 2 1 NPSHR EFFICIENCY % Discharge Pressure at Pump with No Lift (Capacities in Gallons per Minute) 2 3 35 4 6 7 8 9 1 11 12 13 14 3 1 82 7 48 5 18 14 94 86 76 58 2 93 Max Pres. (PSI) 7.5 16 1 94 88 82 76 66 56 2 143 Note: 1. Total discharge pressure of V6 Series units should not exceed 1 psi. 7
Mi445 95 Coverdale Road, Fort Wayne, IN 4689 Tel: 26.824.29 Fax: 26.824.299 www.franklin-electric.com