TRIPLE THREAT INTELLIGENT, ADAPTABLE, TOUGH JLG High Capacity Telehandlers
GET MORE DONE Job sites are harsh. Demanding. Conditions change without warning, and you need equipment that can keep up. JLG telehandlers are designed and manufactured to the highest standards, so you can attack even the toughest challenges with the perfect blend of strength, versatility and smart technology. With these machines, you get the same benefits you ve come to expect from JLG quality, reliability and the highest resale values in the industry. SUPERIOR CAB COMFORT ENHANCED OPERATOR CONFIDENCE Tilt steering Adjustable suspension seat and arm rest Intuitive single joystick control Excellent HVAC performance Excellent visibility for a clear view of the job site around the machine Optional reverse sensing system alerts the operator of rear obstructions with an audible alarm INCREASED VERSATILITY AND EFFICIENCY Inching feature automatically shifts the transmission into neutral when the service brake is depressed, allowing the operator to run the boom at maximum speed for faster delivery of loads at height Optional multifunction display puts important machine information like electronic capacity charts and diagnostics at the operator s fingertips A cast counterweight and integrated tow hitch for added versatility on the job site Industry-specific attachments for specialized applications
MANY TASKS, ONE MACHINE High capacity telehandlers save time, money and labor on the job site by allowing operators to accomplish multiple tasks with one machine. Their higher lift capacity and enhanced versatility cut down on the time it takes to complete the work. Industries like wind, oil and gas, steel erection, industrial construction and mining present unique challenges to equipment operators. With a wide range of specialized attachments, high capacity telehandlers can adapt to demanding job sites and replace other traditional machines. Plus, their ability to handle heavy, bulky loads makes them ideal for performing maintenance on other machines in the rental yard. WARNING: PRODUCTIVITY AHEAD Wide range of specialized attachments Attachments for construction, wind, oil and gas, mining and more Optional SmartLoad Technology Combines attachment recognition with real-time load data Precision gravity lowering and soft stop boom controls Better boom control for more precision and fuel savings 2-speed hydrostatic transmission and optional ride control Improve load stability and promote smoother operation on uneven ground Best-in-class cab Work in more comfort with a spacious cab and intuitive controls
1644 Approximate Operating Weight 33,660 lb (15,265 kg) Drive 4 x 4 Axle Front Axle Rear Steering Maximum Travel Speed Frame Tilt Left/Right High-Bias, Limited Slip Planetary All-Wheel 20 mph (32 km/h) ±8 degrees Maximum Lift Height: 43 ft 7 in. (13.28 m) Maximum Reach: 31 ft 1 in. (9.47 m) Maximum Capacity: 15,650 lb (7,100 kg) Capacity @ Maximum Lift Height: 6,750 lb (3,062 kg) Capacity @ Maximum Reach: 2,000 lb (907 kg) Ground Clearance: 19 in. (483 mm) Engine: Deutz TCD 3.6L HP: 134 hp Transmission: Hydrostatic 2-speed Tires: 17.5-25 SGG Wheelbase: 127 in. (3.23 m) Outside Turning Radius: 13 ft 2 in. (4.01 m) 1644 TELEHANDLER 35 ft 30 ft 25 ft 20 ft 15 ft 10 ft 5 ft 0 ft 50 ft (12.2 m) 45 ft (13.7 m) 40 ft (12.2 m) 60 70 8 7 35 ft (10.7 m) 50 6 30 ft (9.1 m) 25 ft (7.6 m) 20 ft (6.1 m) 15 ft (4.6 m) 10 ft (3 m) 5 ft (1.5 m) 0 ft (0 m) 20 10 0-2 40 30 2,000 lb (907 kg) 3,000 lb (1,361 kg) 4,000 lb (1,814 kg) 5,200 lb (2,359 kg) 6,750 lb (3,062 kg) 8,400 lb (3,810 kg) 10,200 lb (4627 kg) 12,500 lb (5,670 kg) 5 4 3 2 15,650lb (7,100 kg) 1 Width: 97 in. (2.46 m) Length (Less Forks): 243 in. (6.17 m) Height: 105 in. (2.67 m) -5 ft (-1.5 m)
1732 Approximate Operating Weight 31,145 lb (14,127 kg) Drive 4 x 4 Axle Front Axle Rear Steering Maximum Travel Speed Frame Tilt Left/Right High-Bias, Limited Slip Planetary All-Wheel 20 mph (32 km/h) ±8 degrees Maximum Capacity: 16,755 lb (7,600 kg) Capacity @ Maximum Lift Height: 9,900 lb (4,491 kg) Capacity @ Maximum Reach: 5,500 lb (2,495 kg) Maximum Lift Height: 31 ft 8 in. (9.65 m) Maximum Reach: 18 ft 7 in. (5.66 m) Tires: 17.5-25 SGG Wheelbase: 127 in. (3.23 m) Outside Turning Radius: 13 ft 2 in. (4.01 m) Engine: Deutz TCD 3.6L HP: 134 hp Transmission: Hydrostatic 2-speed Ground Clearance: 19 in. (483 mm) 1732 TELEHANDLER 25 ft 20 ft 15 ft 10 ft 5 ft 0 ft 35 ft (10.7 m) 30 ft (9.1 m) 60 69 8 7 25 ft (7.6 m) 20 ft (6.1 m) 15 ft (4.6 m) 10 ft (3 m) 5 ft (1.5 m) 0 ft (0 m) -5 ft (-1.5 m) 20 10 0-3 30 5,500 lb (2,495 kg) 40 6,600 lb (2,994 kg) 50 8,200 lb (3,719 kg) 9,900 lb (4,491 kg) 13,200 lb (5,987 kg) 4 5 6 16,755 lb (7,600 kg) 3 2 24" 1 Length (Less Forks): 233 in. (5.92 m) Width: 97 in. (2.46 m) Height: 105 in. (2.67 m) Visit jlg.com/high-capacity-telehandlers today to learn more about JLG high capacity telehandlers and to locate a dealer near you.
MORE ATTACHMENTS, MORE VERSATILITY JLG offers a wide range of attachments to fit their high capacity telehandlers, from standard carriages to highly specialized tools. Designed for use in industries like industrial construction, logging, mining and wind, these attachments are manufactured with the same quality and reliability as the machines they work with to help you get the job done more efficiently. Bale Clamp Bale Cradle Dual Fork Positioning Carriage Pallet Forks For picking, carrying and For picking, carrying and Adjust each fork position Rugged design makes it easier to placing large square bales placing large round bales independently to handle various handle heavy palletized material palletized loads without leaving the cab Side-Shift Carriage with Standard Carriage Log Handler Pipe Grapple Dual Fork Positioning Forks that are fully floating For handling multiple logs For handling multiple pipes or a Adjust fork position independently; use and adjustable side-to-side for or a large single log larger single pipe left and right carriage shift to handle efficient load entry and exit palletized loads from inside the cab Coupler Mounted Hook Material Handling Arm General Purpose Bucket Grapple Bucket For lifting and lowering objects Designed for lifting and placing Used to clean up the job site, Uses hydraulic arms to secure objects around the job site to spread materials and for bulky loads and is useful for loading and leveling cleaning debris from job sites ADDITIONAL ATTACHMENTS Light Material Bucket Multi-Purpose 4-in-1 Bucket Coupler Mounted Winch Steel Coil Handler Used to clean up the job site, Can be used for loading, Can be used to set trusses For transporting steel coils and cables spread gravel or for loading leveling, bottom dumping and wall sections for wood and leveling or as a grapple bucket and steel building construction Part No. 3132250 Printed in USA JLG Industries, Inc. 1 JLG Drive McConnellsburg, PA 17233-9533 Telephone 717-485-5161 Toll-free in US 877-JLG-LIFT Fax 717-485-6417 www.jlg.com An Oshkosh Corporation Company