RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications Military Instrumentation Heavy-duty industrial equipment Electrical Data Silver Gold SWITCHING MODE: BBM* BBM* MAX. SWITCHING POWER: 5VA 0.2VA Max. SWITCHING CURRENT: 250 ma 20 ma MIN. SWITCHING CURRENT: 10 ma 1 ma MAX. CARRYING CURRENT: 5A 1A MAX. VOLTAGE: 25V 25V MIN. VOLTAGE: 5V 1V BOUNCE: <5ms <5ms CONTACT RESISTANCE after life: <100mΩ <100mΩ DIALECTRIC STRENGTH between contacts or contacts and frame: 500 V rms 500 V rms INSULATION RESISTANCE between contacts or contacts and frame: >10 9 Ω >10 9 Ω Mechanical Data NUMBER OF BANS: 1 to 4 OPERATING TORQUE: 5 Ncm±30% (with 1 module) MECHANICAL STOP RESISTANCE: >70 Ncm BUSHING MOUNTING TORQUE: 100 Ncm Environmental Data OPERATING TEMPERATURE: STORAGE TEMPERATURE: TOTALLY SEALED: * BBM= Break Before Make (non-starting) Materials -25 0 C to +70 0 C -40 0 C to +85 0 C Immersion test acc. to MIL R22.097 F and NFC 20631/QF HOUSING: PBT thermoplastic and PC thermoplastic STATIONARY CONTACTS & TERMINALS: Nickel plated Brass aith additional Gold or Silver plating, insert molded in PBT thermoplastic. ROTOR: Printed circuit, gold or silver plated. ACTUATOR: Steel BUSHING: Brass HARDWARE: Stop pin and spring: Stainless steel All models are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages -19 thru -23. For additional options not shown in catalog, consult Customer Service Center. Designation RTBH Indexing 1 15 /24 positions max. 2 22.5 /16 positions max. 3 30 /12 positions max. 4 36 /10 positions max. Number of Banks** 1 1 Bank 2 2 Banks 3 3 Banks 4 4 Banks Switch Function Number of Poles or code (binary code = B, complement = C, direct +complement = BC) (first digit), Stop (with=s, without=w), Maximum Position (third & fourth digit) Seal 1S02 SP, 02 positions with stop A 1S03 SP, 03 positions with stop D 1S04 SP, 04 positions with stop 1S05 SP, 05 positions with stop 1W16 SP, 16 positions without stop 1S06 SP, 06 positions with stop 1S24 SP, 24 positions with stop 1S07 SP, 07 positions with stop 1W24 SP, 24 positions without stop 1S10 SP, 10 positions with stop 2S04 DP, 4 positions with stop 1W10 SP, 10 positions without stop 2S05 DP, 5 positions with stop 1S11 SP, 11 positions with stop 2S06 DP, 6 positions with stop 1S12 SP, 12 positions with stop GS Gray Code with stop (indicate position) 1W12 SP, 12 positions without stop 1S14 SP, 14 positions with stop 1S16 SP, 16 positions with stop Shaft Diameter & Style*** N Metric shaft.236 (6,0) P Standard shaft.250 (6,35) Standard bushing for panel mount Sealed bushing for panel mount Contact Material S Silver plated, matte-tin terminal P Gold plated, matte-tin terminal Actuator Length Z (.984) 25 mm Actuator Option Angle* N None for actuators without a flat 0 0 angle GW Gray Code without stop (indicate position) only can be 10,12, 16, 24 based on indexing BS Binary Code with stop (indicate position) BW Binary Code without stop (indicate position) only can be 10,12, 16, 24 based on indexing CS Complement with stop (indicate position) CW Complement without stop (indicate position) only can be 10,12, 16, 24 based on indexing ES Direct+Complement with stop (indicate position) EW Direct+Complement without stop (indicate position) only can be 10,12, 16, 24 based on indexing * For other actuator options please contact Customer Service. ** Several functions can be combined, please contact Customer Service. *** Metric diameter shafts are only available with metric diameter bushings, standard 1.250 inch diameter shafts are only available with standard 3/8 diameter bushings. 18 Dimensions are shown: Inch (mm)
DESIGNATION RTBH Series 1-2 Pole Coded Switches RTBH.421 (10,7).236 (6,0).374 (9,5).827 DIA. (21,0Ø).157 DIA. (4,0Ø).039 (1,0).437 (11,1).984 (25,0).835 (21,2).146 (3,7).100 (2,54) 7x0.100 (7x2,54) STANDARD FUNCTION.700 (17,78).126 DIA. (3,2Ø).028x.016 (0,7x0,4).200 (5,08) PITCH PER SECTION.100 REF (2,54) B.300 (7,62) A L.200 (5,08) Dimensions L Number L modules inch mm 1 0.500 12.7 2 0.700 17.78 3 0.900 22.86 4 1.10 27.94 Dimensions A A: (standard) 0.984 inch (25 mm) Dimensions B 5x0.100 (5x2,54) CODED FUNCTION ø.039 TYP (1) 0.236 or 0.250 inch (Ø6 or 6.35 mm) 1 15º index/24 positions 2 22.5º index/16 positions 3 30º index/12 positions 4 36º index/10 positions INDEXING NUMBER OF BANS 1 1 BAN 2 2 BANS 3 3 BANS 4 4 BANS NOTE: Several functions can be combined. For more information consult customer service. 19 Dimensions are shown: mm
RTBH Series 1-2 Pole Coded Switches SWITCH FUNCTION Switch Function Number of Poles or code (binary code = B, complement = C, direct +complement = BC) (first digit), Stop (with=s, without=w), Maximum Position (third & fourth digit) 1S02 1S03 1S04 1S05 1S06 1S07 1S10 1W10 1S11 1S12 1W12 1S14 1S16 1W16 1S24 1W24 SP, 02 positions with stop SP, 03 positions with stop SP, 04 positions with stop SP, 05 positions with stop SP, 06 positions with stop SP, 07 positions with stop SP, 10 positions with stop SP, 10 positions without stop SP, 11 positions with stop SP, 12 positions with stop SP, 12 positions without stop SP, 14 positions with stop SP, 16 positions with stop SP, 16 positions without stop SP, 24 positions with stop SP, 24 positions without stop 2S04 DP, 4 positions with stop 2S05 DP, 5 positions with stop 2S06 DP, 6 positions with stop GS Gray Code with stop (indicate position) GW Gray Code without stop (indicate position) only can be 10,12, 16, 24 based on indexing BS Binary Code with stop (indicate position) BW Binary Code without stop (indicate position) only can be 10,12, 16, 24 based on indexing CS Complement with stop (indicate position) CW Complement without stop (indicate position) only can be 10,12, 16, 24 based on indexing ES Direct+Complement with stop (indicate position) EW Direct+Complement without stop (indicate position) only can be 10,12, 16, 24 based on indexing 1 Single Pole Function 1S10, 1S12, 1S16, 1S24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1S10 1S12 1S16 1S24 3 4 5 C C 10 9 8 4 5 6 C C 121110 7 8 C C 16 15 1011 12 C C 2423 22 1 2 3 C C 8 7 6 1 2 3 C C 9 8 7 4 5 6 C C 14 13 12 7 8 9 C C 211918 1 2 3 C C 11 10 9 4 5 6 C C 1817 19 1 2 3 C C 1514 13 NOTE: Switch depicted from top down onto PCB. 20 Dimensions are shown: Inch (mm)
SWITCH FUNCTION RTBH Series 1-2 Pole Coded Switches 2 DOUBLE POLE FUNCTION B BINARY DIRECT CODE C COMPLEMENT BINARY CODE BS10 BS12 BS16 CS10 CS12 CS16 2S06 1 2 2 2 3 2 C 2 C 2 4 2 5 2 6 2 1 1 2 1 3 1 C 1 C 1 4 1 5 1 6 1 BS24 CS24 NOTE: Switch depicted from top down onto PCB. NOTE: Switch depicted from top down onto PCB. NOTE: Switch depicted from top down onto PCB. G GRAY CODE GS10 GS12 GS16 E DIRECT AND COMPLEMENT BINARY CODE ES10 ES12 ES16 1 2 3 C 4 C GS24 ES24 5 3 1 C 2 4 NOTE: Switch depicted from top down onto PCB. NOTE: Switch depicted from top down onto PCB. 21 Dimensions are shown: mm
RTBH Series 1-2 Pole Coded Switches SEAL A STANDARD BUSHING FOR PANEL MOUNT D SEALED BUSHING FOR PANEL MOUNT.236 DIA. (6,0Ø).236 DIA. (6,0Ø) O-Ring Seal SHAFT DIAMETER & STYLE N METRIC SHAFT 0.236 (6,0) P STANDARD SHAFT 0.250 (6,35).236 DIA. (6,0Ø) ø.402 (10,2).250 DIA. (6,35Ø) 3/8-32 UNEF-2A ø.383 (9,73).343 (8,7).343 (8,7) SHAFT WITH FLAT OPTIONS N (None) ACTUATOR OPTION ANGLE FOR ACTUATORS WITHOUT A FLAT SHAFT WITH SLOT OPTIONS 0 0 ANGLE 0 (STD.) 0 ANGLE ACTUATOR LENGTH Z (.984) 0,25 mm STANDARD SHAFT Other lengths available by request. 22 Dimensions are shown: Inch (mm)
C& RTBH Series 1-2 Pole Coded Switches CONTACT MATERIAL OPTION CONTACT AND CODE TERMINAL MATERIAL RATING S P SILVER GOLD SWITCH: 250 ma, POWER: 5 VA; CARRY: 5 AMPS SWITCH: 20 ma, POWER: 0.2 VA; CARRY: 1 AMP * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. SWITCHING POWER S (SILVER CONTACTS) P (GOLD CONTACTS) V 25 20 5 W V 25 20 15 10 5 10 50 100 150 200 250 ma current Switching power: 5 W Max. voltage: 25 V Min. voltage: 5 V Max. switching current: 250 ma Min. switching current: 10 ma 15 10 5 1 0,2 W 1 5 8 10 15 20 ma Switching power: 0.2 W Max. voltage: 25 V Min. voltage: 1 V Max. switching current: 20 ma Min. switching current: 1 ma 23 Dimensions are shown: mm