ccessories F - Filling plugs B-BB - ir breathers SF - Filling plugs with threaded air filter L - Visual level indicators IR SENTRY - ir dry filters breathers
F FILLING BRETHERS Filling plugs with inbuilt air breather; flanged tank connection with standard dimensions; protection basket against ingression of coarse parts (removable for F2); zinc plated steel body and chrome plated steel cap; seals by cork (Buna N - Nitrile for pressurized version only). ir filter element (non replaceable): cellulose µ polyurathane µ For sizes F21 & F22 only: - the plug has a safety chain - a version with pressurization valve 5 kpa (0,5 bar) is available: ordering code F2 SN (option ) - a version with padlock holder is available: ordering code F2 S P (option P ) ø D1 (option ) (option P ) ø D4 X n... holes Type F11SW F11SWPE F21SW F21SWPE Filtr. µ ø D2 ø D Flow rate GPM 40 80 120 200 H2 H1 D2 ø D5 ø D D1 D2 D D4 holes n D5 D H1 H2 1.9 1.1 1.2 1.1 1.9 2.5 F22SW F22SWPE 120 200 F2SW 120 1. F2SWPE 200 1. 1.9 1.1 1.2 1.7 1.7 1.1 1.9 2.5 5.8 5.8.9.9 Technical data subject to variations without prior notice. F- US -05/200 UFI - PLNET FILTERS S.p.. via S.hierico, 24-2400 Bolgare BG - Tel. 05 44981 - Fax 05 8474
B IR BRETHERS SERIES B - HND MOUNTING ir breathers with threaded connection, zinc plated body and chrome plated cap. ir filter element (not replaceable): cellulose µ polyurathan µ ø D1 Type B11N02 B11N02PE B21N0 B21N0PE Filtr. degree Flow rate GPM 40 80 120 200 /F D1 D2 1.85 1/4" NPT 1.85 1/4" NPT.0 /4" NPT.0 /4" NPT ø D2 /F 0.75 0.75 H1 1.77 1.77 2. 2. H2 H H2 0.47 0.47 0. 0. H1 H Technical data subject to variations without prior notice. B-US-0/2004 UFI - PLNET FILTERS S.p.. via S.hierico, 24-2400 Bolgare BG - Tel. 05 44981 - Fax 05 8474
PLNET HYDRULI FILTERS DIVISION S.P.. SF IR BRETHERS WITH SPIN-ON RTRIDGE MTERILS daptor Basket artridge can Filter media Filtration degree (in air) µ OMPTIBILITY Zinc plated steel Zinc plated steel Steel =ellulose FD = Inorganic fiber B Full with fluids HH - HL - HM - HR - HV - HG (according to ISO 74/4). For fluids different than the above mentioned, please contact our Sales Department. TEMPERTURE From -15 F to 20 F Type Flow rate GPM SF21SW 740 SF22SW 740.08 5.08 7.5 5.8 ø B.9.71.7 1 1/2 1UNF 1 1/2 1UNF ø 5 ø Spare cartridge ESF21N ESF22N Technical data subject to variations wihtout prior notice. SF-US -0/2004 = ellulose FD = Inorganic fiber UFI - PLNET FILTERS S.p.. via S.hierico, 24-2400 Bolgare BG - Tel. 05 44981 - Fax 05 8474
L VISUL LEVEL INDITORS Visual level indicators, tank side mounting; transparent part by Trogamid T; anti-shock protection by aluminium; fixing bolts by zinc plated steel; standard seals by Nitrile (FKM - on request fluoroelastomer). Double scale thermometer (elsius and Farenheit) option available. Max pressure allowed 14,5 psi (1 bar). Working temperature from -4 F to +194 F. Tightening torque for the fixing bolts Nm. Type H1 H2 L11MNW 4.25.0 L11MNT 4.25.0 L12NW.0 5.0 L12NT.0 5.0 L1NW 11.2.0 L1NT 11.2.0 H 1.2 1.2.07.07 7.95 7.95 D M M E1 E2 E Technical data subject to variations without prior notice. L- US -05/200 W= without thermometer T= with thermometer UFI - PLNET FILTERS S.p.. via S.hierico, 24-2400 Bolgare BG - Tel. 05 44981 - Fax 05 8474
PLNET HYDRULI FILTERS DIVISION S.P.. IR SENTRY ir dryer filter breathers ir Sentry Breathers use a three-stage filtration design to ensure optimum protection by removing water vapor and solid contaminants before they enter the fluid system. First, air passes through a fine, 2µ solid particle filter. The air then passes through a diffuser to ensure maximum effectiveness within the silica gel chamber. Next, water vapor is removed as the air travels through a bed of silica gel, the highest capacity adsorbent available. fter being dried, the air passes through a second 2µ solid particle filter and enter the reservoir, clean and dry. SOLID ONTMINNT FILTER 2µ IR DIFFUSER 0 IR FLOW HIGH PITY WTER VPOR DSORBENT SOLID ONTMINNT FILTER 2µ TIVTED RBON REMOVES OIL VPORS LEN DRY IR ir entering is cleaned and dried. Expelled air partially regenerates the silica gel and backflushes the particulate filter to prolong the life of the breather. Silica gel is chemically inert, non-toxic, non-deliquescent and non-corrosive. The internal structure is composed of inerconnected microscopic pores that adsorb up to 40% of its weight. When maximum adsorption is reached, the silica gel turns from yellow to blue to indicate that replacement of the breather is required.
IR SENTRY ir dryer filter breathers TEHNIL DT Nominal air flow rate 24 GPM Solid contaminant filtration 2µ Silica gel adsorption up to 40% of its weight in water B MTERILS D-+ are manufactured from rugged BS plastic and impact-modified Plexiglas. R-+ have a rugged steel reinforced base for heavy duty applications. WORKING TEMPERTURE From -0 to +0 F D D-1 D-2 R-1 R-2 5 8.0 5.5 8.5 ø B 5 5 5.2 5.2 1.2 1.2 1.2 1.2 ONNETION TO THE RESERVOIR D to fit an adaptor -+ 1 NPT 1 NPT The breathers D+ can be attached to the reservoir by using a adapter : mod. -2 for mounting in a threaded hole 1 mod. -4 for bayonet mounting on a standard flange pattern ( holes on 7 mm PD) The breathers R+ are attached to the re-servoir by 1 NPT male pipe thread. dapter -2 threaded 1 NPT Weight lbs..7 4. UFI - PLNET FILTERS S.p.. via S.hierico, 24-2400 Bolgare BG - Tel. 05 44981 - Fax 05 8474 Max H 2 O capacity (GPM) 0.05 0.1 0.05 0.1 dapter -4 bayonet for standard flange Technical data subject to variations without prior notice. S - US - 05/200