Flow Control Division Kämmer Corrosive Application Valves 1
Introduction Optional test port NPT 1 / 4 Anti-blowout stem design Guided stem PN 16 modified PTFE bellows seal,as standard configuration Metal to metal body/bonnet connection for defined compression of the gasket Liner thickness minimum 5mm (3,5 mm for DN15 / 1 / 2 and DN 20 / 3 / 4 ) T-groove liner connection Threaded plug and seat interchangeable with other plug and seat sizes Optional Hastelloy C276 plug and seat inserts for small K vs / C vs -values DIN and ANSI bodies and connections Figure 1: 132000 Body Assembly The new series 132000 control valve completes the range of lined valves within the FLOWSERVE corporation. Many years of experience in the manufacture of lined ball and plug valves and the sophisticated experience of manufacturing excellent reproducible trims for linear valves are combined in this new product. High quality lining materials such as PFA (standard), PVDF, PP, ETFE and FEP as well as PFA antistatic cover most mediums and applications. The revolutionary PTFE bellows design allows a standard pressure rating of PN 16. The increased flow capacity means that the most economical valve can be chosen for the application. 2
Advantages and Features Features Liner materials Liner thickness Liner connection Bellows seal Hastelloy plug and seat inserts Face-to-Face Safety Advantages High Quality liner materials PFA (standard), FEP, PVDF, PP, ETFE for most corrosive applications. A minimum liner material thickness of 3,5-5 mm provides highest protection from the medium. T-grooves ensure a positive mechanical connection between the liner material and the valve body. Standard PN 16 bellows seal manufactured from modified PTFE permit universal valve applications. Hastelloy C276 plug and seat inserts for small K vs /C v values. Reproducable K vs /C v values and characteristics as well as large rangeability. DIN bodies PN 16, integral flanges, DIN face-to-face dimensions DIN bodies with integral flanges drilled in accordance with ANSI Class 150. ANSI bodies with ANSI face-to-face dimentions and ANSI Class 150 flanges. Anti-blowout stem design for all sizes, optional test connection for bellows seal leak detection and safety packing ensure maximum safety Trim Design Threaded plug and seat design for easy replacement and maintenance. Excellent reproduceable trims and C v-values based on long term experience even for small and very small C v-values Figure 2: Plug and seat PTFE Figure 3: Hastelloy plug and seat inserts 3
Lining Materials The liner material, the seat and the bellows seal are the only parts which are in contact with the medium. High quality lining materials such as PFA, (Perfluoroalkoxy resin) protect the metal parts of the valve assembly. T-grooves provide an extremly positive connection between the liner and the valve metal body, especially important in vacuum applications. Liner thickness is at least 5mm (3,5 mm liner thickness for DN 15 / 1 / 2 and DN 20 / 3 / 4 ). p/bar 20 Liner materials are available in most common combinations. PFA, FEP, PP, PVDF ETFE or antistatic PFA cover most application requirements. p/mbar 16 10 5 PP FEP PFA 1 2 3 4 5 10 20 40 60 100 200 300 400 500 900 1015 FEP PFA 80 100 120 130 140 150 160 170 180 190 200 T/ C -20 0 50 100 150 200 T/ C Figure 4: Pressure Temperature Diagram Figure 5: Vacuum Temperature Diagram Bellows Seal Design Standard PN 16 bellows seal manufactured from modified PTFE (TFM) for all applications. Extensive bellows life-cycle testing is based on extrem environmental conditions. All tests are performed at a temperature of 120 C and 16 bar pressure. Table 1: Bellows Seal Details Size Effective Stroke Open/Close area Bellows thrust (cm 2 ) (mm) dan DN 15 6,4 10 110 DN 20 6,4 10 110 DN 25 8,6 20 52 DN 40 8,6 20 45 DN 50 8,6 20 45 DN 80 13,2 40 75 DN 100 13,2 40 75 Figure 6: Bellows Seal 4
Kvs / Cv Table Table 2: K vs / C v -values kvs-value Cv-value Seat diameter (mm) Rangeability Plug material (standard) Seat material (standard) Body size DIN 15 20 25 40 50 80 100 Body size ANSI 0,5 0,75 1 1,5 2 3 4 Stroke (mm) 10 10 20 20 20 40 40 * Hastelloy C276 inserts ** Optional Hastelloy C276 inserts 0,01 0,012 3 50 : 1 Hast C276* Hast C276* 0,016 0,019 3 50 : 1 Hast C276* Hast C276* 0,025 0,029 3 50 : 1 Hast C276* Hast C276* 0,04 0,047 3 50 : 1 Hast C276* Hast C276* 0,063 0,074 3 50 : 1 Hast C276* Hast C276* 0,01 0,012 4,5 50 : 1 Hast C276* PTFE** 0,016 0,019 4,5 50 : 1 Hast C276* PTFE** 0,025 0,029 4,5 50 : 1 Hast C276* PTFE** 0,04 0,047 4,5 50 : 1 Hast C276* PTFE** 0,063 0,074 4,5 50 : 1 Hast C276* PTFE** 0,1 0,12 4,5 50 : 1 Hast C276* PTFE** 0,16 0,19 4,5 50 : 1 Hast C276* PTFE** 0,25 0,29 4,5 50 : 1 Hast C276* PTFE** 0,4 0,47 4,5 50 : 1 Hast C276* PTFE** 0,63 0,74 4,5 50 : 1 Hast C276* PTFE** 1,0 1,2 7 50 : 1 PTFE** PTFE** 1,6 1,9 7 50 : 1 PTFE** PTFE** 2,5 2,9 10 50 : 1 PTFE PTFE 4,0 4,7 12 50 : 1 PTFE PTFE 5,0 5,8 15 50 : 1 PTFE PTFE 6,3 7,4 16 50 : 1 PTFE PTFE 10 12 20 50 : 1 PTFE PTFE 13 15 25 50 : 1 PTFE PTFE 16 19 25 50 : 1 PTFE PTFE 25 29 32 50 : 1 PTFE PTFE 32 37 40 50 : 1 PTFE PTFE 40 47 40 50 : 1 PTFE PTFE 47 55 50 50 : 1 PTFE PTFE 63 74 50 50 : 1 PTFE PTFE 100 120 63 50 : 1 PTFE PTFE 120 140 80 50 : 1 PTFE PTFE 180 210 100 50 : 1 PTFE PTFE The optimised body design of the lined valve series 132000 allows Flowserve to offer one of the widest ranges of Kvs / Cv-values for each individual valve size. This means that smaller valve sizes can be offered with larger Kvs / Cv-values ensuring economical dimensioning. With more than 35 years experience in the manufacture of smallest Kvs / Cv-values Flowserve has gained a reputation as the Small Flow Specialist with the ability to manufacture reproducible trims. 5
Standard Materials of Construction Table 3: Body and Lining materials Body/Bonnet material 0.7043 (GGG 40.3) Body pressure class PN 16 ANSI Class 150 End connections Integral flanges: DIN PN 16 ANSI Class 150 Material Table 5: Bellows seal Modified PTFE TF 1620 for DN 15, 20, 25 TFM 1600 for DN 40, 50, 80, 100 Pressure 16 bar at 120 C Table 6: Options Lining material PFA, FEP, PVDF PFA antistatic ETFE Bellows seal Stem Hastelloy C276 Hastelloy C276 Liner thickness 3,5-6 mm Table 4: Trim Kvs-values See table 2 Rangeability 50 : 1 Material Leakage class Characteristics Modified PTFE for small Kvs / Cv: Hastelloy C276 plug and / or seat inserts 0,01 of rated K vs /C v -value, class IV acc. to DIN IEC 534 Equal percentage Linear On - Off Valve Code 1 3 2 3 P 3 Body type Bonnet Actuator Series 132 Globe valve 132000 3 Bellows seal P2, P3 Pneumatic P4, P5 E3, E4, E5 Electric motor 6
Dimensions and Shipping Weights Table 7: Dimensions (mm) Dimensions A A A F DIN PN 16 Class 150 Class 150 Size DIN ANSI F DN 15 / 1 / 2 130 130 130 185 DN 20 / 3 / 4 130 130 130 185 DN 25 / 1 160 160 184 240 DN 40 / 1 1 / 2 200 200 222 245 DN 50 / 2 230 230 254 250 DN 80 / 3 310 310 298 400 DN 100 / 4 350 350 350 450 Table 8: Weights (kg) Type Size DIN ANSI DN 15 / 1 / 2 6 6 DN 20 / 3 / 4 6 6 DN 25 / 1 11 12 A DN 40 / 1 1 / 2 17 19 DN 50 / 2 19 21 DN 80 / 3 39 37 DN 100 / 4 44 44 7
Regional Headquarters Flowserve Flowserve Flowserve Manderscheidstr. 19 1350 N. Mt. Springs Prkwy. 12 Tuas Avenue 20 45141 Essen Springville, UT 84663 Germany USA Republic of Singapore 638824 Telephone: +49 (0) 201 8919 5 Telephone: +1 801 489 8611 Telephone: +65 862 3332 Facsimile: +49 (0) 201 8919 662 Facsimile: +1 801 489 3719 Facsimile: +65 862 4940 Main Sales Offices (Europe, Middle East, Africa) Flowserve Flowserve Flowserve Flowserve von-braun-straße 19a 12, av. du Québec Station Road Allee du Quartz 1 48681 Ahaus 91965, Courtaboeuf Cedex Pershore, Worcestershire CH-2300 La-Chaux-de Fonds Germany France England WR102BZ Switzerland Telephone: +49 (0) 2561 6860 Telephone: +33 (0) 1 60 923 251 Telephone: +44 (0) 1386 55 45 51 Telephone: +41 (0) 32 925 9700 Facsimile: +49 (0) 2561 68648 Facsimile: +33 (0) 1 60 923 299 Facsimile: +44 (0) 1386 55 49 68 Facsimile: +41 (0) 32 926 5422 Flowserve Flowserve Flowserve Flowserve Units 1 and 2 C/O Saleh & Abdulaziz Abahsain Kasernengasse 6 Burrell Road 26, Imvuba Road, Sebenza Ext 6 P.O. Box 209 Edenvale, Gauteng Hayward Heath Edenglen 1613 Al Khobar 31952 9500 Villach Wesr Sussex South Africa Saudi Arabia Austria England Telephone: +27 11 609 2094 Telephone: 9663 857 3442 Telephone: +43 (0) 424241 181-0 Telephone: +44 (0) 1444 314400 Facsimile: +27 11 609 3735 Facsimile: 9663 859 5284 Facsimile: +43 (0) 424241 181 50/51 Facsimile: +44 (0) 144 3144401 ADK322100E - 07.02 8 All data subject to change without notice 09.2002 Flowserve Corporation. Flowserve and Kämmer are trademarks of Flowserve Corporation