Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D PL 11231 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 Holder of certificate: PFI Fareast Testing & Technology Services Co. Limited, PFI Fareast Building; Changfeng St., Xunmei Industrial Zone, Eastern District of Quanzhou City, Fujian Province, P.R. China Tests in the fields: Chemical and physical chemical testing of textiles, leather, footwear, plastics, rubber, toys, cardboard, electrical products, wood as well as articles coming into contact with skin; selected sensory testing Abbreviations used: see last page Within the given testing field marked with *, the testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, the following: the free choice of standard or equivalent testing methods. The listed testing methods are exemplary. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. 1/10
1. Chemical and physical chemical testing of textiles, leather, footwear, plastics, rubber, toys, cardboard, electrical products, wood 1.1 Organic hazardous substances in leather, textiles, rubber, plastics, wood and paperboard as well as toys and children s products using gas chromatography * ISO 24362 1 2014 02 BVL B 82.02 3 2004 06 [ 35 LMBG 82.02 3:2004] ISO 24362 3 2014 02 ISO 17234 1 2010 02(E) IULTCS/IUC 20 1:2010(E) ISO 17234 2 2011 03 BS EN 14362 1 2012 03 BS EN 14362 3 2012 06 BVL B 82.02 9:2006, revision: 2008 03 [ 64 LFGB 82.02 9:2006 revision: 2008] Textiles Methods for determination of certain aromatic amines derived Part 1: from azo colorants Detection of the use of certain azo colorants accessible with and without extracting the fibres Analysis of consumer goods Determination of azo dyes in dyed leathers Textiles Methods for determination of certain aromatic amines derived Part 3: from azo colorants Detection of the use of certain azo colorants, which may release 4 aminoazobenzene Leather Chemical tests for the determination of certain azo colourants in dyed leathers Part 1: Determination of certain aromatic amines derived from azo colourants Leather Chemical tests for the determination of certain azo colorants in dyed leathers Part 2: Determination of 4 aminoazobenzene Textiles Methods for the determination of certain aromatic amines derived from azo colorants Part 1: Detection of the use of certain zao colorants accessible with and without extracting the fibres Textiles Methods for the determination of certain aromatic amines derived from azo colorants Part 3: Detection of the use of certain azo colorants, which may release 4 aminozaobenzene Analysis of consumer goods Determinaton of the use of azo dyes, which can generate 4 aminoazobenzene Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 2/10
ISO 18857 1 2005 02 ISO/TS 16190 2013 07 ISO 18287 2006 01 SN/T 1877.4 2007 04 SN/T 1877.2 2007 04 ZEK 01.4 08 2011 11 ISO/TS 16179 2012 08 BS EN ISO 17353 2005 08 GB/T 20385 BVL B 82.02 8 2001 06 [ 35 LMBG 82.02 8:2001] DIN EN ISO 17070 2007 01 Water quality Determination of selected alkylphenols Part 1: Method for non filtered samples using liquid liquid extraction and gas chromatography with mass selective detection (Modifications: ultrasonic extraction with methanol) Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials Soil quality Determination of polycyclic aromatic hydrocarbons (PAH) Gas chromatographic method with mass spectrometric detection (GC MS) (Modification: ultrasonic extraction with n hexane) Determination of polycyclic aromatic hydrocarbons in rubber and rubber products Determination of polycyclic aromatic hydrocarbons in plastic and plastic article Testing and validation of polycyclic aromatic hydrocarbons (PAH) in the course of GS Mark certification Footwear Critical substances potentially present in footwear and footwear components Determination of organotin compounds in footwear materials Water quality Determination of selected organotin compounds Gas chromatographic method (Modification: ultrasonic extraction with ethanol solution) Textiles Determination of organotin compounds Analysis of consumer goods Detection and determination of pentachlorophenol in consumer goods, particularly in leather and textiles Leather Chemical tests Determination of pentachlorophenol content (Modification: Additional determination of tetrachlorophenol and trichlorophenol isomers) Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 3/10
BS PD CEN/TR 14823 2003 09 BS EN ISO 18856 2005 10 ISO/TS 16181 2011 07 EN 14372 2004 08 EN 15777 2009 08 GB/T 20388 GB/T 22048 2008 06 CPSC CH C1001 09.3 2010 04 GB/T 20387 BS EN ISO 15318 2000 03 IEC 62321 Ed.1.0 2008 12 GB/T 20386 Durability of wood and wood based products Quantitative determination of pentachlorophenol in wood Gas chromatographic method Water quality Determination of selected phthalates using gas chromatography/mass spectrometry (Modification: ultrasonic extraction with dichloromethane solution) Footwear Critical substances potentially present in footwear and footwear components Determination of phthalates in footwear materials Child use and care articles Cutlery and feeding utensils Safety requirements and tests (part 6.3.2) Textiles Test method for phthalates (withdrawn standard) Textiles Determination of the content of phthalates Toys and children s products Determination of phthalate plasticizers in polyvinyl chloride plastic U.S.A. Consumer Product Safety Improvement Act of 2008 (H.R.4040) Title I, Section 108, Prohibition on Sale of Certain Products containing specified Phthalates, Standard Operating Procedure for Determination of Phthalates Textiles Determination of the content of polychlorinated biphenyls (PCBs) Pulp, paper and board Determination of 7 specified polychlorinated biphenyls (PCBs) Electrotechnical products Determination of levels of six regulated substance (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) Textiles Determination of the content of Ortho phenylphenol Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 4/10
ISO/TS 16186 2012 08 SN/T 2446 2010 03 SN/T 2454 2010 03 ISO/TS 16189 2013 07 US EPA 3550C 2007 02 US EPA 8015C 2007 02 DIN 54232 2010 08 Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethylfumarate (DMFU) in footwear materials Determination of dimethyl fumarate in leather and leather products Gas chromatography mass spectrometry method Determination of dimethyl fumarate in mildew preventives Gas chromatography spectrometry Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethylformamide in footwear materials Ultrasonic extraction with methanol and determination by gas chromatography spectrometry with flame ionization Detector (here for the determination of DMFA N,N Dimethylformamide) Non halogenated organics by gas chromatorgraphy (here for DMFA N,N Dimethylformamide) Textiles Determination of the content of bonds based on chlorobenzene and chlorotoluene 1.2 Organic contaminants in leather, textiles, rubbers, plastic as well as metal using high performance liquid chromatography (HPLC) * DIN EN ISO 17226 1 2008 08 BVL B 82.02 10 2007 03 [ 64 LFGB 82.02 10:2007] DIN 54231 2005 11 SN/T 1850.2 2006 11 Leather Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography Allergenic disperse dyes and carcinogenic disperse dyes Analysis of consumer goods Verification of disperse dyes in textiles Textiles Detection of disperse dyestuffs Determination of alkylphenols and alkylphenol polyethoxylates in textiles Part 2: High performance liquid chromatography mass spectrometry method Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 5/10
CEN/TS 15968 2010 11 DIN SPEC 1038 2010 11 SN/T 1850.1 2006 11 Determination of extractable perfluorooctanesulfonate (PFOS) and Perfluorooctanoic Acid (PFOA) in coated and impregnated solid articles, liquids and fire fighting foams Method for sampling, extraction and analysis by LC qms or LC tandem/ms Determination of alkylphenols and alkylphenol polyethoxylates in textiles Part 1: High performance liquid chromatography method 1.3 Determination of formaldehyde in textiles BVL B 82.02 1 1985 06 [ 35 LMBG 82.02 1:1985] DIN EN ISO 14184 1 1999 02 EN 717 1996 03 BS EN 717 3 1996 09 DIN EN 717 3 1996 05 Analysis of consumer goods Determination of formaldehydedispensing of textiles in consumer goods Textiles Determination of formaldehyde Part 1: Free and hydrolized formaldehyde (water extraction method) Wood based panels Determination of formaldehyde release Part 3: Formaldehyde release by the flask method 1.4 Determination of organic compounds and organic contaminants in leather BS EN ISO 13365 2011 01 ISO/DIS 18218 1 2012 06 Leather Chemical tests Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography Leather Determination of ethoxylated alkylphenols Part 1: Direct method (withdrawn standard) 1.5 Heavy metals in plastics, textiles, toys, children s products using atomic absorption spectrometry * DIN EN 1122 2002 02 Method B Plastics Determination of cadmium Wet decomposition method Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 6/10
BS EN 13346 2000 10 Method C CPSC CH E1001 08.3(2012/11/15) 2012 CPSC CH E1002 08.3(2012/11/15) 2012 CPSC 16 CFR Part 1303, CPSC CH E1003 09 (2009.4.26) 2009 ASTM E 1645 01 2007 08 ASTM E 1613 04 2007 04 AOAC 974.02 2006 US EPA 6010C 2007 02 US EPA 7000B 2007 02 Characterisation of sludges Determination of trace elements and phosphorus Aqua regia extraction method U.S.A. Consumer Product Safety Improvement Act of 2008 (H.R.4040) Title 1, Section 101, Children s Products Containing Lead Lead Paint Rule, Standard Operating Procedure for Determining Total Lead (Pb) in Metal Children s Products (including Children s Metal Jewelry) U.S.A. Consumer Product Safety Improvement Act of 2008 (H.R.4040) Title 1, Section 101, Children s Products Containing Lead Lead Paint Rule, Standard Operating Procedure for Determining Total Lead (Pb) in Non Metal Children s Products U.S.A Consumer Product Safety Commission Code of Federal Regulations Title 16: Commercial Practices, Part 1303, Ban of leadcontaining paint and certain consumer products bearing leadcontaining paint Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis ASTM Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (for instrument test) Atomic Absorption Spectrophotometric method Lead in Paint Inductively Coupled Plasma Atomic Emission Spectrometry (Sample pretreatment: Acid Digestion, Microwave Assisted Acid Digestion) Flame Atomic Absorption Spectrophotometry (Sample pretreatment: Acid Digestion, Microwave Assisted Acid Digestion) Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 7/10
BVL B 80.30 1(EG) 1998 01 [ 35 LMBG 80.30 1(EG):1998] GB/T 17593.1 GB/T 17593.2 2007 12 GB/T 17593.4 GB/T 22930 2008 12 GB/T 17593.2 2007 12 ASTM F 963 08 Section 4.3.5.2 EN 71 3 1994 12 BS EN 71 3 1995 06 DIN EN 71 3 2002 11 Extraction close to BVL B 80.30 1(EG):1998 with synthetic perspiration, and determination by ICP OES, AAS and AFS Textiles Determination of heavy metals Part 2: Inductively coupled plasma atomic emission spectrometry Standard Consumer Safety Specification for Toy Safety Surface Coating Materials Soluble Test for Metals Safety of toys Part 3: Migration of certain elements (including arsenic) (Withdrawn standard) 1.4 Determination of heavy metals and metal content in toys, leather and textiles EN71 3 2013 ISO 17072 1 2011 02 ISO 17072 2 2011 02 DIN 54233 1 2010 02 DIN 54233 3 E 2010 02 Safety of toys Part 3: Migration of certain elements Leather Chemical determination of metal content Part 1: Extractable metals Leather Chemical determination of metal content Part 2: Total metal content Testing of textiles Determination of metals Part 1: Determination of metals using microwave digestion Testing of textiles Determination of metals Part 3 Determination of metals extracting by acid synthetic perspiration solution Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 8/10
DIN EN ISO 17075 2008 02 BVL B 80.30 1(EG) 1998 01 [ 35 LMBG 80.30 1(EG): 1998] GB/T 17593.3 Leather Chemical tests Determination of chromium(vi) content Extraction close to BVL B 80.30 1(EG):1998 with synthetic perspiration, and determination by UV Vis Textiles Determination of heavy metals Part 3: Chromium (VI) Spectrophotometry 1.5 Determination of heavy metals and metal content in articles coming into contact with the skin BS PD CR 12471 (E) 2002 09 Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin 1.6 Physico chemical, chemical test in leather and textiles ISO 3071 2005 06 EN ISO 3071 2006 03 BS EN ISO 3071 2006 03 DIN EN ISO 3071 ISO 4045 2008 02 EN ISO 4045 2008 02 BS EN ISO 4045 2008 05 DIN EN ISO 4045 2008 05 Textiles Determination of ph of aqueous extract Leather Chemical tests Determination of ph Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 9/10
1.7 Selected sensory tests on textiles, leather, plastics, metal, rubber, wood, paperboard, toys and children s products, preservatives SNV 195 651 1968 03 Textiles Determination of odour emission of finishings (sensory testing) (here: for leather, textiles, plastics, metal, rubber, wood, paperboard, mildew preventives, toys and children s products) Abbreviations used: ASTM AOAC BS BVL CPSC DIN EN GB/T IEC ISO IULTCS SN/T SNV US EPA ZEK American Society for Testing and Materials, American standard testing methods Association of Analytical Communication British Standard Federal Office for Consumer Protection and Food Safety U.S. Consumer Product Safety Commission German Institute for Standardization European Standard Chinese National Recommendatory Standard International Electrotechnical Commission International Organization for Standardization International Union of Leather Technologists and Chemical Societies China Professional Standards for Entry & Exit Inspection and Quarantine Swiss Association for Standardization U.S. Environmental Protection Agency Decision of the central comities of experience exchange group in the ZLS (Central Authority of the German States for Safety) Period of validity: 24.08.2015 to 24.07.2018 Date of issue: 24.08.2015 10/10