Why choose Bosch Timing Belts? Bosch is one of the largest suppliers of automotive belts to the Australian and New Zealand market, offering a comprehensive range for Australian, Asian and European vehicle applications. The minimum standard of quality for Bosch Timing Belts is Original Equipment specification, with design and manufacture for absolute reliability in modern engines being of primary concern. Bosch Timing Belts are manufactured with the highest quality materials, including: Pre-stretched polyester tension cords Standard glass-fibre tension cords Fiber-reinforced belt back Highly Saturated Nitrile (HSN) The entirety of the manufacturing process ensures greater lateral stiffness, without compromising flexibility and strength, providing against engine damage. All this is achieved whilst still upholding vehicle manufacturer s replacement guidelines. Advantages: Made to Original Equipment specifications for peace of mind. Quiet running thanks to smooth polyamide fabric cover. Non-stretch glass-fibre, longitudinal strand construction ensures maximum durability and service life. High-temperature belts also available, giving greater oil,heat and moisture resistance inline with some manufactures specifications.
Advantages of Bosch Timing Tensioner Kits Due to the centrality of the timing belt to the overall functioning and safety of the engine, it runs at a considerably high rate of tension, which safeguards it from jumping and losing alignment. Moreover, given the sheer amount of components in consistent contact with the belt, wear of pulleys, tensioners and bearings is an unavoidable part of the process. In addition, some of the angles or curvature places on the belt are considerable, which further adds to the load placed upon the pulleys and tensioners. As engine layouts become more and more compact, the durability of the timing belt and its associated components is tested even further. Why choose Bosch Timing Belt & Tensioner Kits? The complete repair solution in one box All major components are included Original Equipment quality ensures peace of mind Advantages of Bosch Timing Belt & Tensioner Kits Through research and development underpinnings ensures accurate and reliable fitment. One-stop solution ensures the procedure is completed correctly the first time, which maintains customer satisfaction. Large breadth of available part numbers ensures the vast majority of vehicles have fitments available. Consistent range expansion ensures new vehicle fitments are promptly available.
Component Structure Teeth Various engine concepts and operating conditions have led to the development of a rang of timing belt contours. It is essential when changing a timing belt that a belt with the right contours, number of teeth, width and material be fitted to avoid damaging the belt and engine. Belt Spines The belt spine and teeth are made of high-grade polychloroprene rubber or Hydogenared Nitrile Butadiene Rubber (HNBR). HNBR is widely known for its physical strength and retention of properties after long-term exposure to heat, oil and chemicals. These materials also generate excellent adhesion to the tension cord. Protective Tooth Fabric The covering fabric made of High Strength Nylon offers wear-resistant protection against the teeth and low friction operation of the timing belt. Tension Cords Timing belts require length consistency and tensile strength. To achieve this, tension cords of glass-fibre material are used. These tension cords are wound over the entire width if the belt. This feature prevents the belt from slipping of the pulley. Note: Bosch timing belts can be installed in either direction without compromising their operating characteristics. The printed arrows on the timing belts are only required for certain vehicles with ignition timing markings.
Bosch Drive Belts Stronger Design Bosch drive belts feature pre-stretched polyester tension cords, fibre reinforced belt backs and stranded glass fibre tension cords to ensure low maintenance and later stiffness. These features also provide the highest level of protection from engine damage. Longer Life Bosch drive belts are highly resistant to abrasions, oil, grease, water and UV radiation. As temperatures in the engine compartment vary between -30 C and +180 C this offers greater stability and longer life. Higher Performance The task of Raw-edge cogged belt and V-ribbed belt is essentially to transfer energy to accessories and auxiliary devices such as alternator and air-conditioning compressor. This takes place through the frictional connection between the belt and the drive pulley. Due to the high dynamic forces to which the belt is exposed, it has to have especially high tensile strength and be dimensionally stable, both longitudinally and shape-wise. It also has to be laterally stable at right angles to the direction of travel. Bosch drive belts satisfy these requirements and deliver higher performance in the process. Quieter and Cooler Operation Bosch drive belts have been designed to run more quietly and cooler than standard belts. This increases driver comfort and belt life.
Bosch V-Belts Our unique internal cogged construction helps to minimise bending energy loss and ensures maximum torque transmission. Made to the highest of OE specifications and thanks to the use of high tensile cord construction, you can be sure to have the longest service life possible. Bosch V-Ribbed belts have a fibre reinforced backing and a large power-transmitting surface area, which gives them high tractability and keeps the belt secure in the pulley. They generate little noise in running and ensure the reliable functioning of all auxiliary devices. The double v-ribbed belt is shaped on both sides, designed for a high level of power transmission. Top Fabric Strong, wear resistant, bias-cut fabric protects the top of the belts without losing flexibility. Tensile Cords Pre-stretched, strong polyester cords are places in a straight line, providing less stretch and high horse power rating. Compression rubber Fibre chip reinforced rubber compound is used to provide high friction co-efficiency, excellent wear resistance & high flexibility. Laminated Bottom Fabric Crack resistant, highly-flexible fabric impregnated with oil and heat resistant rubber compound. Moulded Cog Unique cog design resulting in longer flex life over small high speed sheaves.