Machine Roomless Lifts

Machine Roomless Lifts Complete Lift Design Solutions 2010/11 From Global Lift Equipment Ltd Global Lift Equipment Ltd H42/H43 Ashmount Enterprise Park, Flint, Flintshire, CH6 5YL. Tel: 01352 735400 Fax: 01352 735733 Email: sales@global-lift.com www.global-lift.com

THE GLOBAL RANGE OF LIFTS Global Lift Equipment are a well established supplier within the UK Lift Industry Specialising in design and supply of complete lifts and lift components Our in house UK Design Team work alongside Lift Companies, Architects, Specifiers and End Clients from conception to completion of a project to ensure that the ultimate customer receives the lift to their bespoke requirements. Working closely with our Notified Body (Bureau Veritas) gives us flexibility to accommodate difficult existing parameters which require specialist design. In addition to Machine Roomless Lifts, our wide range includes: Traction/Hydraulic with Machine Room Vehicle Lifts Scenic Lifts Lorry Lifts Bespoke Lifts To compliment our complete lifts we can offer internal or external Structures, both semi supported and free standing, along with various standard cladding options and finishes. Page 1

INTRODUCTION The OPTIMA - E is the ultimate lift system for traction lifts as it removes the need for a motor room above or adjacent to the lift shaft. We have developed and improved the OPTIMA product significantly over many years and now have a solution which is a market leader in the UK, the new OPTIMA E. The machine system is Gearless which makes the running costs very attractive, gives a very good ride quality and makes recovery under power failure and emergency conditions very easy and cost effective. Gearless Systems remove the need for complex remote handwinding systems or large banks of back-up batteries for power supply - a simple emergency recovering system controlling the brake on the machine is all that is needed. We only use high quality equipment for the OPTIMA - E, Machine: The Machine is manufactured by CEG as standard with option for a ZA Machine at extra cost if required. Controller: The Controller is a Lester Controls Panel manufactured in the UK with a Control Techniques Drive or at extra cost a Ziehl Abegg Drive. Doors: The Door Systems are Fermator with options for Anti-Vandal Doors or the new Heavy Duty Fermator Door System designed for the Local Authority Market - The Robusta. Rucksack Arrangement The Machine is located in the head of the lift shaft and mounted over guides. The standard design is a Rucksack Arrangement therefore loads are only applied to one wall and also allowing 3 sides lifts to be provided. Conventional Arrangement For larger loads or at your request, a Conventional Type Arrangement can be supplied with Lift Car Guides on the horizontal axis. The Controller is located as standard at the top floor in a cabinet size 525mm Wide x 250mm Deep x 2100mm High. The Drive is located within the cabinet unless high capacity requiring large Drive sizes then the Drive has to be located in larger cabinet on the landing or within the lift shaft. Alternatively the Controller can be located at any other location within the building, up to a maximum of 20m away from the machine on request at additional cost. Page 2

INTRODUCTION We have an extensive range of finishes available however should these finishes not suit your customers requirements we can provide at extra costs finishes tailored to suit your own customer needs. The OPTIMA-E is the complete answer to the increasing demand for compact space saving and environmentally conscious lifts. Standard pit mm Standard headroom 3550mm Special headrooms of 00mm can be accommodated with additional safety features approved and certified with our notified body Bureau Veritas at extra cost. Installation is quick and easy equipment has been designed in close association with lift installers to reduce on site installation times. Page 3

GENERAL OVERVIEW Capacity: 320 kg 480 kg 6 kg kg 1000 kg - 4 Persons - 6 Persons - 8 Persons - 10 Persons - 13 Persons Speed: 1.0 m/s ACVVF - Options for 1.6m/s & 2m/s Drive Unit: Compact Gearless & Purpose Designed Machine located above. Power Supply: 415v, 3 phase, 50hz Control System: Down Collective Microprocessor by Lester Controls Ltd Parameter Control and Fault Finding/Diagnostic Facility Programming and Real-Time Fault Logging Anti-nuisance Feature Car Preference Control Overload Indication Car and Landing Push Buttons and Hall Lanterns Power and Car Light Main Switch included Control Cabinet Located on Landing Autodialler with Intercom Option Illuminated Cabinet Fire Recall to Main Floor Entrances: VVVF Car Door Operator Complete with Set of Door Panels Complete Landing Entrances - Models 40/10 & 50/11 2 Hour UK Fire Rated Landings Aluminium Tracks Full Height Door Detector Car Frame: Fabricated Steel Structure with Swivelling Sliding Guide Shoes and Lubricators Complete with Shaft Top Beams and Divertor Pulleys Counterweight Frame and Fillers Bi-directional Safety Device in Compliance with 95/16/EC Car Top Railing in Compliance with 95/16/EC Pit Screen (On Conventional Arrangement, support steels on headroom by others) Fixtures: Full Height COP with Autodialler & Speech, Emergency Light, Overload Display Gilda Landing Stations Complete with EN81-70 Compliant Buttons & Indicators - see options. Page 4

DATA TABLE - RUCKSACK ARRANGEMENT All door arrangements for this table are 2 panel side opening Speed is based on 1m/s A maximum speed of 1.6m/s is available but pit & headroom dimensions will be subject to change - please contact the sales department for variations LIFT CODE PAY LOAD P+Q Max CAR SIZE CAR DOOR Min PLUMB ENTRANCE SIZE SHAFT 3270 320 Kg 900 Kg. 750x1100 1 700 1320x1470 3700 1:1 3272 320 Kg 900 Kg. 750x1100 2(180º) 700 1320x1620 3700 1:1 3280 320 Kg 900 Kg. 900x1000 1 1470x1370 3700 1:1 3282 320 Kg 900 Kg. 900x1000 2(180º) 1470x1520 3700 1:1 4580 450 Kg 1200 Kg. 950X10 1 1520x1670 1:1 4582 450 Kg 1200 Kg. 950X10 2(180º) 1520x1820 1:1 4580 450 Kg 1200 Kg. 1000X1250 1 1570x1620 1:1 4581 450 Kg 1200 Kg. 1000X1250 2(90º) 1720x1620 1:1 4582 450 Kg 1200 Kg. 1000X1250 2(180º) 1570x1770 1:1 4590 450 Kg 1200 Kg. 1000X1250 1 900 1570x1620 1:1 4592 450 Kg 1200 Kg. 1000X1250 2(180º) 900 1570x1770 1:1 6380 6 Kg 1500 Kg. 1100X1400 1 1670x1770 6381 6 Kg 1500 Kg. 1100X1400 2(90º) 1820x1770 6382 6 Kg 1500 Kg. 1100X1400 2(180º) 1670x1920 6383 6 Kg 1500 Kg. 1100X1400 3 1820x1920 6390 6 Kg 1500 Kg. 1100X1400 1 900 1670x1770 6391 6 Kg 1500 Kg. 1100X1400 2(90º) 900 1820x1770 6392 6 Kg 1500 Kg. 1100X1400 2(180º) 900 1670x1920 6393 6 Kg 1500 Kg. 1100X1400 3 900 1820x1920 PIT HEAD Max ROOM TRAVEL SUSP See overleaf for further Pay Loads Page 5

DATA TABLE - RUCKSACK ARRANGEMENT All door arrangements for this table are 2 panel side opening Speed is based on 1m/s A maximum speed of 1.6m/s is available but pit & headroom dimensions will be subject to change - please contact the sales department for variations LIFT CODE PAY LOAD P+Q Max CAR SIZE CAR DOOR Min PLUMB ENTRANCE SIZE SHAFT 8080 Kg 1 Kg. 1350X1400 1 1920x1770 8081 Kg 1 Kg. 1350X1400 2(90º) 2070x1770 8082 Kg 1 Kg. 1350X1400 2(180º) 1920x1920 8083 Kg 1 Kg. 1350X1400 3 2070x1920 8090 Kg 1 Kg. 1350X1400 1 900 1920x1770 8091 Kg 1 Kg. 1350X1400 2(90º) 900 2070x1770 8092 Kg 1 Kg. 1350X1400 2(180º) 900 1920x1920 8093 Kg 1 Kg. 1350X1400 3 900 2070x1920 1090 1000 Kg 2200 Kg. 1100X2100 1 900 17x2470 3700 1091 1000 Kg 2200 Kg. 1100X2100 2(90º) 900 1880x2470 3700 1092 1000 Kg 2200 Kg. 1100X2100 2(180º) 900 17x2620 3700 1093 1000 Kg 2200 Kg. 1100X2100 3 900 1880x2620 3700 1000 1000 Kg 2200 Kg. 1400X1600 1 1000 20x1970 3700 1001 1000 Kg 2200 Kg. 1400X1600 2(90º) 1000 2180x1970 3700 1002 1000 Kg 2200 Kg. 1400X1600 2(180º) 1000 20x2120 3700 1003 1000 Kg 2200 Kg. 1400X1600 3 1000 2180x2120 3700 PIT HEAD Max ROOM TRAVEL SUSP Page 6

RUCKSACK ARRANGEMENT Page 7

CONVENTIONAL ARRANGEMENT Contact Sales Department for details Page 8

VENUS LIFT CAR DURABLITY & ECONOMY Skinplate The VENUS range of materials are aimed at durability and economy yet offer a variety of designs and finishes. LIFT CAR WALLS Modular Skinplate from range FRONT RETURNS Modular Skinplate from range DOOR PANELS Primed Epoxy Doors (Option: linished stainless steel) SKIRTING Modular Skinplate from range CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Stainless Steel Tubular Handrail located on rear wall VENTILATION Natural The car construction complies with the requirements of Directive 95/16/EC The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option. Page 9

JUPITER LIFT CAR ELEGANCE & STYLE Laminate The JUPITER design offers an attractive, flexible theme by way of a large selection of finishes and options LIFT CAR WALLS Laminate (on Wood) from range FRONT RETURNS Laminate (on Wood) from range (Option: Linished Stainless Steel) DOOR PANELS Linished Stainless Steel SKIRTING Linished Stainless Steel CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car construction complies with the requirements of Directive 95/16/EC The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option. Page 10

MARS LIFT CAR PRACTICALITY & SIMPLICITY Linished Stainless Steel LIFT CAR WALLS Self Supporting Linished Stainless Steel FRONT RETURNS Linished Stainless Steel DOOR PANELS Linished Stainless Steel SKIRTING Linished Stainless Steel CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Stainless Steel Tubular Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car construction complies with the requirements of Directive 95/16/EC The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option. Page 11

STAR LIFT CAR ROBUSTNESS & VARIETY OF DESIGN Patterned Stainless Steel The STAR design features stainless steel finishes with a choice of different patterns. LIFT CAR WALLS Patterned Stainless Steel FRONT RETURNS Patterned Stainless Steel DOOR PANELS Patterned Stainless Steel SKIRTING Linished Stainless Steel (option for Patterned Stainless Steel) CAR OPERATING PANEL Linished Stainless Steel CEILING & LIGHTING Suspended Ceiling from range FLOORING Studded Rubber from range HANDRAIL One off 40mm Diameter Tubular Stainless Steel Handrail located on any wall VENTILATION Natural (Option: Forced Ventilation Fan) MIRROR A Mirror can be provided in either a natural or tinted finish in various sizes (Option) The car construction complies with the requirements of Directive 95/16/EC The car & landing buttons with position/movement indicators and audio/visual indications, satisfy the latest requirements for lifts used by disabled people. Further features to comply with DDA and Part M Building Regulations are available as an option. Page 12

OPTIMA E - Options Available Option for ZA Machine Option for Windcrest Autodialler Option for Dewhurst Pusbuttons Car Ventilation Fan Natural Mirror on Rear/Side Wall Car Body with Side & Rear Wall in Framed Toughened & Laminated Glass Car Floor Recess (Max 20mm) Car and Landing Doors with Increased Height of 2100mm Anti Vandal Door Panels available or Heavy Duty ROBUSTA doors designed for Local Authorities Landing Door Panels and Frames in Linished, Mirror Polish or Patterned Stainless Steel Framed Glass Car and Landing Doors Landing Entrance Infill Panels Landing Entrance Infill Panels in Linished, Mirror Polish or Patterned Stainless Steel Indicator at all other Floors - see range Braille and Tactile Embossing (Ceasar Tags) Fire Fighting Control or Evacuation Control to EN81-72 Duplex Control System Controller Cabinet in Linished Stainless Steel or Patterned Stainless Steel Alternative Location for Controller Available Power Supply with 60hz Rescue Device DDA and Part M Compliance Pack Tip Up Seat Option - 2 models available Continuous Handrails Page 13

LIFT CAR FINISHES - Skinplate The wide selection of wall and floor finishes offered in our cars should meet the demands of Architects, Lift Consultants and Lift Users. The quality of the material will ensure durability throughout the years. PPS-29 GREEN PPS-28 RED F-15 SILVER Subject to change - please enquire for specific lead times. Page 14

LIFT CAR FINISHES - Laminate U522 ST15 Powder Blue U514 ST15 Baltic Blue U323 ST15 Chilli Red U212 ST2 Cream U611 ST15 Turquoise Green H3389 ST24 Natural Light Oak H1951 ST15 Sienna Calvados H1883 ST15 Light Diamond Maple Subject to change - please enquire for specific lead times. Page 15

LIFT CAR FINISHES - Stainless Brushed 441 Stainless Steel Mirror Polish Stainless Steel Pattern - Linen Pattern - Squares Pattern - 5WL Pattern - 2WL Subject to change - please enquire for specific lead times. Page 16

LIFT CAR FLOORING - Rubber Grey Button Rubber Black Button Rubber HANDRAILS All handrails are round - 40mm to comply with EN81-70 PM PN PD PR - Chromium Plated (mirror polish) Handrail - extra cost - Black Painted Handrail - included - Gold Anodised Handrail - extra cost - Stainless Steel Handrail - included Continuous Handrails also available at extra cost Page 17

SUSPENDED CEILINGS Lift car ceilings and lighting are one of the most important aspects of the car interior decoration. They must provide functional light to meet required Lux levels whilst also being aesthetically pleasing. The standard GLE range includes all models shown below - T1,T2,T3,T4,T5 & T8 These Ceilings are available in Black or White. Other ceilings at extra cost: TC - Ice laminated Stadip glass 3+3 with a stainless Steel frame TD - White Dulaconcord ceiling with methacrylate on a stainless steel frame TE - Bronze Coloured lamiglas mirror with black-framed halogen lights on a black square frame TG - Black Primed sheet with black framed halogen lights Page 18

SAMPLE BESPOKE LIFT CARS Lift Car: Decorative Laminate with golden Stainless steel plates. Round Profiles in stainless steel AISI-4 on rear corners Ceiling: Suspended cork type with gold framed Halogen lights with gold stainless steel Square frame Floor: Castano Verdoso Granite Mirror: Bronze colour half mirror lamiglas with A decorative gold stainless steel Handrail COP: Gold stainless steel Lift Car: Decorative Laminate fixed with Stainless steel profile Ceiling: suspended painted black coat sheets with methacrylate Floor: Black button rubber Mirror: Bronze colour half mirror lamiglas with A decorative stainless steel handrail COP: Stainless steel Column Page 19

SAMPLE BESPOKE LIFT CARS Lift Car: Decorative Laminate Ceiling: Suspended Ice laminated glass Stadip 3+3 with a stainless steel frame Floor: Red Porrino Granite Mirror: Bronze colour half mirror lamiglas COP: Stainless steel Column Lift Car: Bronze coloured lamiglas mirror between stainless steel AISI-4 modules with vertical round profiles of stainless steel in the rear corners Ceiling: Bronze coloured lamiglas mirror with black frame halogen lights on a black square frame Floor: Negro Sudafrica granite COP: Stainless steel Page 20

PUSHBUTTONS - Standard Range PB01 - BL SINGLE ILLUMINATION Stainless steel pressel and stainless steel halo Simultaneous illumination of halo & tactile legend. Pressel backward compatible with original BF range EN81-70 compliant TECHNICAL FEATURES Structure polycarbonate Mounting 3mm projecting through faceplate Fixing Frontal mounting fixed by screw-cut ring. Fixing thickness 0.8mm-5mm Pushbutton 1.8mm stroke Wiring Wires screwed on terminals Illumination 4 red LED Life 2500000 operations Protection IP51 (dust & vertical water fall) Contacts 1 or 2 contacts, 2 contact version N/O only 1 contact version N/O & N/C PB02 - BD DUAL ILLUMINATION Stainless steel pressel and stainless steel halo Illumination of halo & tactile legend in Red & Blue Pressel backward compatible with original BF range EN81-70 compliant TECHNICAL FEATURES Structure polycarbonate Mounting 3mm projecting through faceplate Fixing Frontal mounting fixed by screw-cut ring. Fixing thickness 0.8mm-5mm Pushbutton 1.8mm stroke Wiring Wires screwed on terminals Illumination Acceptance 4 led / Legend 1 led Life 2500000 operations Protection IP51 (dust & vertical water fall) Contacts 2 changeover contacts Page 21

PUSHBUTTONS - Optional Range Anti Vandal Solid Stainless Steel Pushbutton Suitable for hostile environments Front mounting without studs 3 profiles available - Moon, Disc & Classic 3 colours available - Blue, Amber & Red 2 tags available with/without Braille - Caesar & Brutus EN81-70 DDA Compliant EN81-71 DDA Compliant Suitable for Fire Fighting Lifts Brass PVD Button also available PB03 - PANZER BUTTONS PB04 - SHERMAN BUTTONS TECHNICAL FEATURES CAESAR TAG Tactile or Braille Tactile Operating Stroke 1.8mm activation Life 1500000 operations min Illumination Red/Blue or Amber high density LED 12/24Vac/dc or 120Vac. Also available non illuminated. Contacts 1 or 2 microswitches, C-NO/NC each. Separate circuits for microswitches & illumination BRUTUS TAG Tactile or Braille Tactile Page 22

INDICATORS - Standard Range IND 001 - LIP D43 DOT MATRIX Size: 108mm x 75mm Available with or without Bi-tonal Gong Available with Red or Blue display IND 002 - LIP D43 7 SEGMENT Size: 108mm x 75mm Available with or without Bi-tonal Gong Available with Red or Blue display Page 23

INDICATORS - Optional Range IND 005 - GL/540 LCD Scrolling or Static Displayed Information Vertical or Horizontal Mounting Binary Coding or Serial Version EN81-70 Compliant Turquoise or Indigo Background Display Display Area: 105mm wide x 58mm high Overall Size: 160mm wide x 104mm high x 23mm deep The GL540 LCD Indicator can be easily programmed via a PC/laptop Changes can be made easily including changing the number of floors, floor names, way of mounting, text messages, appearance of arrows etc. IND 006 - GL/0 LCD Scrolling or Static displayed information Vertical or Horizontal Mounting Binary Coding or Serial Version EN81-70 Compliant Turquoise or Indigo Background Display Easy Programming via PC/Laptop Fits in a 100mm wide Gilda surface mount landing plate Display Area: 36mm wide x 67mm high Overall Size: 70mm wide x 108mm high x 19mm deep Changes can be made easily including changing the number of floors, names of floors, way of mounting, text messages, appearance of arrows etc. Page 24

INDICATORS - Optional Range IND 007 - GL/TFT Full Colour LCD Displays for the Lift Car We have shown a typical layout. Background, position of lift data, time, Company details, font, colour etc is all to Client s choice. Presentation style programming via Windows CE based operating system. Images easily edited by copying to SD Card/USB or connection via LAN. Portrait or Landscape Display Screen Sizes Available: 8, 10.4, 12.1 (diagonally across) Display can include: Floor and Travel Directions of the Lift Time Based Information Floor Position Indication Warnings/Optional Information Date/Time Background Choice GLOBAL LIFT EQUIPMENT LTD Royal Hotel HOTEL BLUE Page 25

INDICATORS - Optional Range IND 008 - GL/TFT-LITE Using the latest technology, our TFT LITE series can illustrate vivid images with high color contrast and resolution At only 18.5mm in depth, the compact, ultra slim design makes it easy for installation when space is limited. With the new TFT LITE series, it enhances your building s image instantly at a reasonable price. Features: TFT Color LCD of color capability up to 262K colors Super bright with high contrast ratio Wide viewing angle Aesthetic display of basic lift information Ultra Slim of only 15-20 mm depth Binary - 12-24VDC supply Car Display Landing Display Displays are EN81-70 DDA Compliant. Portrait & Landscape displays Lift is at the Ground Floorwaitingfor a call Screens display sizes: 4.3, 5.6 & 7 Page 26

LANDING PLATES - Standard Range LF 001 H23 Gilda Surface Mount Stainless Steel Finish with single DDA compliant push button - see options Stainless Steel Halo With Comfort Tone Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost LF 002 H23 Gilda Surface Mount Stainless Steel Finish with two DDA compliant push buttons - see options Stainless Steel Halo With Comfort Tone Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost LF 003 H23 Gilda Surface Mount Stainless Steel Finish With LIP 7 Segment Indicator Or Dot Matrix Indicator With or without Gong Red or Blue illumination See Options Gilda plates also available in Mirror Polish or Brass Coloured Finish at extra cost Page 27