Sand Media Filtration ESTACIONES DE FILTRADO DE ARENA. For the Most Challenging Dirty Water Conditions in Irrigation Irrigation Systems
Media Filters Time. Quality. Experience. Knowledge. Yardney pioneered the use of sand media filtration in 196 and through advancing technology, continues to provide high performance and long- term value in the field. Yardney Sand Media filters are manufactured in the USA to the most exacting standards. Weld tabs are standard on all media tanks and screen filter housings. Applications Removal of algae, slime or other organic contaminant as well as sand, rock, grit and other inorganic contaminants Advantages ASME code shaped head construction for durability and safety Standard carbon steel products, /1 thick material Standard stainless steel products, 10 gauge thick material Standard operating pressure of (high pressure systems available) Backwash automatically initiated by elapsed time or pressure differential Easy-entry lid closure with weld tabs for operator safety Protects drip and micro- irrigation systems from plugging with fine filtration removal down to 00 mesh or 7 microns Stainless steel wedgewire underdrain Ensures structural integrity in the harshest conditions Hydraulically balanced to increase effectiveness of backwash while reducing flush frequency and waste of water High strength stainless steel wedgewire will withstand a collapse pressure in excess of 600 psi Exterior of tank on carbon steel product is powder coated with UV stabilized polyester powder coat for longer product life and greater protection from the environment Standard drain port included on all and 4" tanks ensuring less labor for dumping of media and access to the stainless steel underdrain Standard " drain port included on 1, 1", and 0" tanks Made in USA
Stainless Steel Underdrain Weld couplings accompanied with a galvanized plug are standard on the endcaps of inlet and outlet manifolds. The underdrain system features a lateral design of high strength stainless steel wedgewire, producing a pressure drop of only 4 psi, and will withstand collapse pressure in excess of 600 psi. Automatic and Manual Valves SM-400 Model comes standard with two drain ports for faster media removal and easier inspection. The Yardney patented cast-iron backwash valve is the only valve in the industry designed as standard equipment to be 100% field serviceable with basic hand tools and includes a grease fitting for valve shaft lubrication. Valves feature fusion epoxy lining and the valve shaft and seal retainers are noncorrosive stainless steel with durable, molded polyurethane seals.
Filtration System Operation Filtration Process The contaminated water enters the tank through the inlet manifold, transitioning to the Yardney -way valve and into the top inlet of each tank The Yardney two-stage deflector creates a uniform distribution for laminar flow across the media bed while avoiding channeling of the media bed Particulate is trapped and retained within the media bed resulting in clean process water flowing out through the stainless steel wedgewire underdrain, to the outlet of each filter tank and to the outlet manifold for end use Backwash Process Backwash sequence is initiated by either elapsed time of the Yardney controller or pressure differential between the inlet and outlet manifolds Water or air pressure opens the Yardney - way valve causing the reverse flow of a portion of filtered water up through the stainless steel underdrain to hydraulically and uniformly lift the media bed The use of a hydraulically balanced underdrain in conjunction with a gravel pack creates a proper and uniform lift of the media bed while avoiding a turbulent backwash Entrapped particulates are released during the backwash event, exhausted through the backwash manifold and routed to a convenient location One tank at a time is backwashed while continuing to process water for use until the entire system is clean Once completed with the backwash, filtration continues until the next backwash event is called for
Yardney Sand Media Filters Specifications SPECIFICATIONS SAND MEDIA FILTERS Model Number of Tanks Standard Flow Ranges Minimum Flow Maximum Flow gpm m /hr gpm m /hr Filtration Surface Area (total sq ft) Backwash Flow Rate (per tank) gpm m /hr Media Requirements (cubic feet) Gravel 1/-/ Media Maximum Pressure Inlet/ Outlet Pipe Size Backwash Line Pipe Size 1416-6 1.1 16 4 1 1 1/" 1 1/" 116-60 14 0. 7 6 " 1 1/" 116-90 0 1 0. 7 6 " 1 1/" 416-107 4 1 6 6. 47 11 7 " " 416-160 6 9.4 47 11 11 " " 016-167 4 6 9. 74 17 10 1 psi " 616-40 0 14.1 106 4 14 10 psi 016-0 7 6 4 14.7 74 17 1 1 psi " 616-60 0 10 1. 106 4 1 1 10 psi 416-4 97 6 14.0 4 14 6 416-6 14 9 1 7. 4 1 9 416-4 4 0 19 10 4 0.0 4 " 416-106 4 16 6. 4 6 416-6 6 17 90 17 46 7.0 4 4 7 416-7 7 14 497 7. 4 49 91 416-1700 6 00 6 100.0 4 6 104 Yardney offers four option packages within the sand media filter product line. Option SM-100 (available only on 4" tanks) SM-00 SM-00 SM-400 (available only on 4" tanks) Material Type Carbon Steel Carbon Steel Stainless Steel Carbon Steel Stainless Steel Carbon Steel Material /1 /1 10 Gauge /1 10 Gauge /1 Thickness Drain port No drain port provided 1 1" 0" tanks: One " drain port and 4" tanks: One drain port Two drain ports Underdrain Epoxy Composite Welded stainless steel wedgewire (optional crossflow underdrain) Threaded & replaceable stainless steel wedgewire with sch. 0 PVC hub (optional crossflow underdrain) Top Manway " " Side Manway 11"x1 Elliptical - - 1 1" 0" tanks: x" Elliptical and 4" tanks: 11"x1 Elliptical - Interior Tank Coating - - M Scotchkote 14 M Scotchkote 14 - M Scotchkote 14 Interior Manifold Coating - - - M Scotchkote 14 M Scotchkote 14 M Scotchkote 14 Exterior Coating Powder Coat - - Powder Coat Powder Coat Powder Coat Part number and ordering information Model CS/SS Example: SM- 400-416- 4 -CS-xxx* SM - XXX - XXXX - X - XX - xxx Option Number Number of Tanks High Pressure Option * For high pressure systems, append 100, 1 or 10 to part number. For pressure ratings above 10 PSI, please consult a Yardney representative.
Sand Media Filters Tank Dimensions DIMENSIONS Model A B C D E F G H I J K 1416-1 1/" 1" 1/ 1 1/" 1 /" / 1/ 7 /1 " 16 9/1 116- " " 1/ 1 1/" 1 /" 6 7/" 9" 4 1/1 0 /1 4 /1 416- " " 1/ " " 7 1/ 9 7/" 1 /1 4 1/ 6 9/1 4 11/1 016-1/ " " 7 / 4 7/" 1 /1 9/1 6 616-40" 1/ 1/" 1/" 4" 1 /1 " 40 1/ 0 9/1 416- " 1/ 1/" 9 /" 7 / 4 /1 10 11/1 1/ 01 Riverside, CA 907 1001 01 Yardney Water Management Systems, Inc. 6666 Box Springs Blvd. Riverside, CA 907 0901