NEWS & PROMOTIONS FEBRUARY MARCH 2018

NEWS & PROMOTIONS FEBRUARY MARCH 2018

TRIED. TESTED. WHEN YOU RE WKING IN THESE CONDITIONS, YOU NEED TOOLS YOU CAN RELY ON. - PAUL MACPHERSON PAUL MACPHERSON OFFSHE PIPE WELDER 30 DAY NO RISK SATISFACTION GUARANTEE If not completely satisfied with the performance of the DEWALT product, it can be returned to the point of purchase within 30 days for a full refund or exchange. Proof of purchase required. 1 YEAR FREE SERVICE CONTRACT Applies to DEWALT branded products that require maintenance or service within 12 months of purchase. DEWALT will provide 1 service free of charge, undertaken by an authorised DEWALT service agent. Proof of purchase required. Terms and conditions apply see www.dewalt.com for details *Unless specifically excluded within the product warranty information 3 YEAR LIMITED WARRANTY* A repair warranty that applies to DEWALT branded products* in the unlikely event that the product becomes defective within 3 years of purchase due to faulty materials or workmanship. DEWALT guarantees to replace all defective parts free of charge or at discretion replace the unit. Proof of purchase required. LOCATION: GLOBAL Meet Paul Macpherson, for over 20 years he s been a pipe welder in the four corners of the globe. Putting up with everything Mother Nature can throw at him and his tools. HARSH REALITIES Offshore pipe welding means Paul s workplace can be the middle of the Persian Gulf at 40ºC, or -20ºC in the Arctic waters. It s an unforgiving environment. A place where there is little margin for error, and no room for tools that aren t tough enough. RELIABILITY IS KEY The job doesn t stop, it s 24/7. So if a tool isn t up to the job, the whole project comes to a halt. It s why Paul insists on using DEWALT. A particular favourite being the 18V Cordless XR Brushless Angle Grinder. DCG405N-XJ DCG406N-XJ 18V XR BRUSHLESS 125MM GRINDER SLIDE SWITCH BARE TOOL DCG405N-XJ PADDLE SWITCH BARE TOOL DCG406N-XJ Get better performance, runtime and less service costs with DEWALT s new brushless grinders. 18V Brushless motor Electronic Break Electronic Clutch Available in either slide switch or paddle switch 2 3

18V XR 2 PIECE KITS 18V JOBSITE BLOWER BARE TOOL XR RADIO CHARGER DCR027-XE DAB+ and FM tuner receives digital and analogue signal Bluetooth for remote streaming audio 3A XR charger with charge indicator LED light AVRCP allows you to control streaming audio from the radio Accepts 18V and 18/54V XR FLEXVOLT batteries AUX and USB in protective tech box Roll Cage for maximum durability NEW 18V XR 2PC KIT 5AH DCZ276P2-XE DCD796 Brushless 2 Speed Hammer Drill Torque: 70Nm, 2000rpm, Max capacity [wood] 40mm, 13mm metal chuck DCF887 Brushless 3 Speed Impact Driver 205Nm, 3800 ipm, 3-speed / torque settings : 2 x 5Ah 18V XR Batteries Kit Bag BLUETOOTH SPEAKER BARE TOOL DCR006-XJ 5AH XR LI-ION BATTERY DCB184-XE 18V XR XRP BRUSHLESS 4 PIECE KIT 5AH DCZ471P2-XE DCD796 Brushless Hammer Drill Torque: 70 Nm, Chuck: 13mm Max, capacity: [wood] 40mm DCF887 Brushless 3 Speed Impact Driver Torque: 205Nm, 3800 ipm, 3-speed settings DCH133N Brushless Rotary Hammer Impact energy (EPTA 05/2009) 2.6 J, Max. Drilling Capacity: [Concrete] 26 mm NEW DCL044-XJ LED Inspection Light 130 Lumen output, IP55 rated : 2 x 5Ah 18V XR Batteries Kit Bag 18V XRP 2PC KIT 5AH TSTAK DCK296P2T-XE DCD996 XRP 3 Speed Hammer Drill E-Clutch, 3-speed, 95 Nm, 2000 rpm, 13mm metal chuck DCF887 3 Speed Impact Driver 205Nm, 3800 ipm, 3-speed / torque settings : 2 x 5Ah 18V XR Batteries TSTAK Deep Kit Box DCZ276P2-XE DCK296P2T-XE VISIT GUARANTEEDTOUGH.CO.NZ TO REDEEM TODAY 4 5

WOODWKING MACHINERY 1300W HEAVY DUTY PLUNGE SAW DWS520KT-XE 1300W motor Anti kickback function Variable speed: 1750-4000rpm 55mm depth of cut 1.5m rail & TSTAK Kit Box 180MM VS POLISHER DWP849X-XE 1250 Watt Motor Variable speed trigger for control 0-600 / 3500rpm Large variable speed dial for specific applications Max Disc diameter 150 & 180 & 230mm Rubber overmoulded gearcase Replaceable wool ingestion shields No volt release switch 1300W HEAVY DUTY PLUNGE SAW DWS520KTK-XE KTK version also includes: 2 x 1.5m rails Joining bar Rail quick clamps (pair) Air Lock Adapters & Rail bag 4MM 1050W HEAVY DUTY PLANER D26500K-XE 4mm depth of cut 13,500rpm 25mm rebate depth Left right chip ejection Shoe width 82mm Kit includes: Tungsten carbide blades, parallel fence, rebate guide, dust bag and chip ejector, heavy duty carry case 125MM RANDOM BIT SANDER DWE6423-XE 1/4 SHEET BITAL PALM GRIP SANDER DWE6411-XE 18V JOBSITE BLOWER BARE TOOL 305MM 1675W COMPOUND SLIDE MITRE SAW WITH XPS DWS780-XE Outstanding cutting accuracy & performance XPS Shadow Cut Line System for accurate alignment Big capacity: H 110mm x W 305mm or W 345mm x H 76mm Heavy duty site tough durability ensures lifetime accuracy Positive stop bevel & mitre functions for precision cutting Compact profile for ease of portability < 25Kg total weight Includes: High quality 60 tooth blade, blade spanner, dust bag, material Clamp 254MM HEAVY DUTY 2000W PTABLE TABLE SAW DWE7491-XE Max ripping capacity 825mm Steel roll cage protects against jobsite impacts Rack and pinion fence system 0-48 bevel capacity Cast table top ensures accuracy Overload protection system Includes: 24 tooth saw blade, mitre fence, parallel 2 x blade spanners, push stick 125MM RANDOM BIT SANDER DWE6423-XE 1/4 SHEET BITAL PALM GRIP SANDER DWE6411-XE 18V JOBSITE BLOWER BARE TOOL 38L DUST EXTRACT M CLASS DWV902M-XE M-Class, dual filter auto clean system Power rating 1,400W Air flow: 4,080 L/min Wet & dry pick up capability 1000W power take off, auto start-stop Includes: 4.6m x 32mm hose, 35mm Air Lock & stepped rubber adapters, dust bag OSCILLATING MULTI-TOOL KITTED DWE315KT-XE Quick change accessory system Universal adaptor Dual grip variable speed trigger Oscillations per minute: 0-22,000 Kit includes: 37Pc Accessory Set, Universal Accessory Adaptor, sanding platen, TSAK Kit Box 30L DUST EXTRACT L CLASS DWV900L-XE L-Class classification & Capacity 30L Power rating 1,400W Air flow: 4,080 L/min Wet & dry pick up capability 1000W power take off Includes: 2m x 32mm hose, 35mm Air Lock adapter, dust bag DWS520KTK-XE, DWS520KT-XE, DWP849X-XE, DWE315KT-XE, D26500K-XE FLO CLEANING KIT DWV9350-XJ DWV902M-XE DWV900L-XE 254MM 1800W PTABLE TABLE SAW DW745-XE Max ripping capacity 610mm Steel roll cage protects against jobsite impacts Rack and pinion fence system 0-48 bevel capacity Cast table top ensures accuracy Overload protection system Includes: 24 tooth saw blade, mitre fence, parallel 2 x blade spanners, push stick 355MM ABRASIVE CHOP SAW D28710-XE Horizontal side handle for superior ergonomics Quick release clamp No-load speed: 3,800 rpm Abrasion protected 2200W motor for increased durability Spindle lock for quick wheel change Includes: Metal cutting disc, hex key DWS780-XE DWE7491-XE DW745-XE 125MM SLIDE SWITCH GRINDER DWE4151-XE D28710-XE 6 7

18V XR COMBO KITS 18V XR COMBO KITS 18V 165MM CIRCULAR SAW BARE TOOL DCS391N-XE 18V BRUSHLESS 2-TOOL COMBO KIT DCK266P2-XE TOUGHSYSTEM Kit Box TOUGHSYSTEM Kit Box 18V 4-TOOL 5AH COMBO KIT INCL BRUSHLESS DCK399P2-XE DCF899 Brushless High Torque 1/2 Impact Wrench DCG412 125mm Angle Grinder 18V 6-TOOL COMBO KIT WITH TOOL CONNECT INCL BRUSHLESS DCK696P2B-XE 18V 125MM GRINDER BARE TOOL DCG412-XE DCD996 XRP 3spd Hammer Drill 2 x 5.0Ah XR Li-Ion DCS380 Reciprocating Saw Bluetooth Batteries DCS391 Circular Saw DCG412 125mm Angle Grinder 2 x TOUGHSYSTEM Kit Box DCR006 Bluetooth Worksite Speaker Tool Connect For security and inventory management 18V 3-TOOL COMBO KIT 5AH INCL BRUSHLESS DCZ391P2-XE DCG412 125mm Angle Grinder 18V 3-TOOL 5AH COMBO KIT INCL BRUSHLESS DCK393P2-XE DCF880 1/2 Impact Wrench DCG412 125mm Angle Grinder 18V COLLATED GUN BARE TOOL DCF620KN-XE 18V 4-TOOL 5AH COMBO KIT INCL BRUSHLESS DCK451P2-XE DCS380 Reciprocating Saw DCS391 165mm Circular Saw DS150 TOUGHSYSTEM DS400 TOUGHSYSTEM 18V 5-TOOL COMBO KIT 5AH INCL BRUSHLESS DCZ594P2-XE DCS387 Reciprocating Saw DCG412 125mm Angle Grinder DCL040 LED Pivot Light 18V 6-TOOL COMBO KIT 5AH DCK693P2-XE DCD985 XRP 3spd Hammer Drill DCF885 Impact Driver DCS380 Reciprocating Saw DCS391 Circular Saw DCG412 125mm Angle grinder DCL040 LED Pivot Light 2 x TOUGHSYSTEM Kit Box DCK696P2B-XE, DCK693P2-XE, DCK451P2-XE, DCZ594P2-XE, DCZ391P2-XE, DCK393P2-XE DCK399P2-XE, DCK266P2-XE VISIT GUARANTEEDTOUGH.CO.NZ TO REDEEM TODAY 8 9

18V XR KITS 18V XR KITS 18V BRUSHLESS IMPACT DRIVER BARE TOOL DCF887N-XE 18V BRUSHLESS HAMMER DRILL 5AH KIT DCD796P2-XE 18V BRUSHLESS 3 SPEED IMPACT DRIVER KIT DCF887P2-XE Heavy Duty all-metal transmission Brushless motor technology No-load speed: 0-550 / 2,000rpm Beats per min: 0-34,000bpm Torque: 70 Nm Max capacity (wood) 40mm 13mm all-metal keyless chuck Ultra bright 60 Lumen work light Belt clip and magnetic bit storage Heavy Duty Kit Box No-load speed: 0-3,250rpm Impacts per min: 0-3,800ipm Torque: 205 Nm 3 speed / torque settings 6.35mm drop-in hex bit holder Brushless motor technology 3x LED Halo light ring Belt clip and magnetic bit storage Heavy Duty Kit Box 18V 1/2 HIGH TQUE BRUSHLESS IMPACT WRENCH KIT DCF899P2-XE No-load speed: 0-400 / 1200 /1900 rpm Impacts per min: 0-2,400ipm Torque: 950 Nm (1625Nm breakaway) 1/2 (12.7mm) Socket Drive 3 speed / torque settings Aluminium front housing for durability Heavy Duty TSTAK Kit Box 18V HAND HELD WET / DRY VACUUM BARE TOOL DCV517N-XJ 18V SDS PLUS ROTARY HAMMER KIT DCH254M2-XE Ideal for anchors and fixing holes up to 24mm in masonry Best in Class Hand/Arm Vibration 6.6 m/s² Impact Energy: 2.1J, Beats per min: 0-4,500bpm No Load Speed: 0-1,200rpm 3 Mode: Chisel, Hammer & Rotary drilling 2 x 4.0Ah XR Li-Ion Batteries Quick Change Chuck Kit Box 18V BRUSHLESS XRP 3 SPEED HAMMER DRILL KIT DCD996P2-XE XRP 3 Speed all-metal Transmission No-load speed: 0-450/1300/2000rpm BPM: 0-8,600/25,500/38,250bpm Torque: 95 Nm LED Work light Brushless motor technology Electronic Clutch Side Handle 18V BRUSHLESS HAMMER DRILL BARE TOOL DCD796N-XE 18V BRUSHLESS COLLATED DRYWALL SCREWDRIVER 5AH KIT DCF620P2K-XE 4,400rpm Brushless Motor, up to 6,000 screws per charge Up to 6,000 screws per charge Tool-free depth control Rotating detachable screw magazine Auto & manual operation Set & Forget manual feed nose piece Screw length 25-57mm Accepts most common collated screws Collated Magazine, Nose Piece PR2 Driver Bit & TSTAK Kit Box 18V BRUSHLESS OSCILLATING MULTI-TOOL 4AH KIT DCS355M2-XE Versatile multi-tool Suitable for variety of applications Quick change accessory system Universal adaptor Fits most oscillating accessory brands Dual grip variable speed trigger Oscillations per minute: 0-20,000 Brushless motor technology 2 x 4.0Ah XR Li-Ion Batteries 35 Piece Accessory Set Universal Accessory Adaptor 18V 1/2 HIGH TQUE BRUSHLESS IMPACT WRENCH KIT - FRICTION RING DCF899HP2-XE No-load speed: 0-400 / 1200 /1900 rpm Impacts per min: 0-2,400ipm Torque: 950 Nm (1625Nm breakaway) 1/2 (12.7mm) socket drive with friction ring 3 speed / torque settings Aluminium front housing for durability Heavy Duty TSTAK Kit Box DCD796P2-XE, DCF887P2-XE, DCH254M2-XE, DCD996P2-XE, DCF620P2K-XE, DCS355M2-XE, DCF899P2-XE, DCF899HP2-XE VISIT GUARANTEEDTOUGH.CO.NZ TO REDEEM TODAY 10 11

10.8V CROSS & PLUMB LASER DCE0822D1G-XE A rugged cross line laser that combines selectable cross lines with plumb function Includes an integrated magnetic bracket Uses the latest in TRUE GREEN DIODE technology to produce a beam that is 4 x brighter than traditional red beam lasers Ideal for all levelling applications and floor to ceiling transfer work Comes complete with a 10.8V battery and charger NEW DCE0822D1G-XE Type Levelling Type Cross with plumb Self Laser Class 2 Accuracy (dot) Accuracy (Iine) 0.2mm/m 0.3mm/m Compensation Range ± 4º Levelling Time 3s Working Range 15m (Line)/30m (Dot Screw Thread for Adapter 1/4 Working Range with Detector 60m Batteries (Alkaline unless otherwise noted) 10.8v (Included) Battery Life (all lasers on) 10 hours Operating Temperature -10ºC > 50ºC IP Rating IP65 Image for illustration - all items shown may not currently be available TOUGHSYSTEM TOTE DWST1-75654 9M POCKET LASER DISTANCE MEASURE DW030PL-XJ Arguably the smallest laser distance measurer in the world. DW030PL offers the convenience of a laser distance measurer at the price of a traditional tape measure. Plus its small enough to fit comfortably in your pocket. 9m working range USB charge internal lithium battery +/- 6mm accuracy at 9m Metric & imperial measurements 30M LASER DISTANCE MEASURE DW033-XJ Rugged 30m distance measure that makes quick estimates of distance as simple as pushing a button. Features digital tape measure function. +/- 3mm / m accuracy Metric & imperial measurements TOUGHSYSTEM MOBILE STAGE DWST1-75668 High quality 7 wheels Bi-material telescopic handle IP65 water seal and dust protection Wide handle for pushing & pulling Side latches for modular stacking Anti-rust metal latches & padlock eye TOUGHSYSTEM WKSHOP RACKING DWST1-75694 The new ToughSystem workshop racking system provides the ultimate workplace solution. With a load capacity of up to 200kg per rack, this system is perfect for all ToughSystem modules. ROLLER BAG DWST1-79210 DWST1-75694, DWST1-75668 12 13

ACCESSY OFFERS 18V XR LED TRIPOD WKLIGHT DCL079 Compatible with all 18V XR batteries this height adjustable durable worklight is IP rated to work in the toughest conditions. Features 3 brightness settings with a neutral colour perfect for checking surface finishes. Bulb Type Max Output Colour Temperature LED 3000 Lumen 4000 K IP Rating 55 THE NEW GENERATION OF PTABLE JOBSITE LIGHTING COMING SOON AFTER APRIL 2018 1000W RECIP SAW DWE305PK-XE 1100 Watt motor designed for heavy duty applications 4 position blade clamp for flush cutting and added versatility Lever-action blade change for ease of use Stroke rate: 0-2,800 spm Stroke length: 29mm Includes: Heavy duty kit box FREE BONUS XR 13 PIECE RECIP BLADE SET DT99550-QZ 18V BRUSHLESS COMPACT RECIP SAW BARE UNIT DCS367N-XJ Heavy duty Brushless Motor 4 position blade clamp LED work light No-Load Stroke rate: 0-2900 spm Max Cutting Capacity ( Wood): 300 mm Batteries & Charger available separately 18V RECIP SAW BARE UNIT DCS380N-XE Rapid cutting action for increased productivity 4 position blade clamp enables flush cutting Stroke Rate: 0-2950spm Ergonomic rubber over molded hand grip Fast reliable Lever-Action blade change mechanism 3 Position Shoe enables even blade wear DWE305PK-XE, DCS367N-XJ, DCS380N-XE High power LED spot and area lights Enough runtime for a full working day when used with an 5.0AH XR battery pack Ideal for tradespeople who work in a confined or poorly lit spaces for extended periods Durable rubberised handles and heavy duty build quality Supplied as bare unit LED PIVOT INSPECTION LIGHT DCL040-XE 110 Lumen output 90 degree vertical head pivot Up to 10 hours runtime LED MAGNETIC INSPECTION LIGHT DCL044-XJ 130 Lumen output 180 degree pivot and rotating head Up to 27 hours runtime 701W HEAVY DUTY TOP HANDLE JIGSAW DW331K-XE Patented keyless blade change system 0-3,100spm (Stroke Length: 26mm) Tool - free adjustable bevel Tapered blade roller for reduced blade deflection Pendulum Action: 4 stage Anti-scratch cover, splinter insert, dust adapter, heavy duty kit box 18V XR JIGSAW BARE TOOL DCS331N-XE Powerful & efficient high-speed cutting action Tool-free blade change and dual beveling base Stroke Rate: 0-3,000spm Stroke Length: 26mm Blade Change: Tool-free Pendulum Action: 3 stage FREE BONUS 14 PIECE T-SHANK JIGSAW BLADE SET DT2298 DW331K-XE, DCS331N-XE LED PIVOT TASK LIGHT DCL050-XE 250-500 Lumen output 9 position articulating lamp head Broad and even beam pattern Up to 10 hours runtime LED PIVOT SPOT LIGHT DCL043-XE 100-1000 Lumen output 400m distance Articulating lamp head Up to 10 hours runtime LED AREA LIGHT DCL060-XE 1500 Lumen output Broad and even beam pattern Rotatable lamp head Up to 3.3 hour runtime FREE BONUS XR 184MM X 20MM 24T BLADE DT99577-QZ 18V XR BRUSHLESS CIRC SAW BARE TOOL DCS570N-XE High-torque Brushless motor Variable adjustment of the bevel angle to 57 degrees No-Load Speed: 5500 rpm Max depth at 90 degrees: 64 mm FREE BONUS IMPACT DRILL BIT SET DT70503B-QZ 18V XR BRUSHLESS IMPACT DRIVER BARE TOOL DCF887N-XE No-load speed: 0-3,250rpm Impacts per min: 0-3,800ipm Torque: 205 Nm 3 speed / torque settings 6.35mm drop-in hex bit holder 3x LED Halo light ring Runtime based on 5Ah 18V Battery. 14 15

FM Please tick one redemption offer per item purchased on the table below and fill in your details to receive your redemption. PROOF OF PURCHASE REQUIRED. PO boxes will not be accepted. Customer Information Purchase Information Name: Store Name: Address: Invoice No: Please attach a copy of your receipt Email: Phone: Please tick if you wish to receive information on new DEWALT products, promotions and prize giveaways. Page Purchased Qty Redeem Qty Page Purchased Qty Redeem Qty 5 DCZ276P2-XE DCK296P2T-XE DCR006-XJ DCB184-XE DWS520KTK-XE DWE6423-XE DWS520KT-XE DWE6411-XE 6 DWP849X-XE DWE315KT-XE D26500K-XE 6 DWV902M-XE DWV9350-XJ DWV900L-XE DWS780-XE DWE6423-XE 7 DWE7491-XE DWE6411-XE DW745-XE 7 D28710-XE DWE4151-XE 8-9 10-11 DCK696P2B-XE DCK693P2-XE DCK451P2-XE DCZ594P2-XE DCZ391P2-XE DCK393P2-XE DCK399P2-XE DCK266P2-XE DCD796P2-XE DCF887P2-XE DCH254M2-XE DCD996P2-XE DCF620P2K-XE DCS355M2-XE DCF899P2-XE DCF899HP2-XE DCS391N-XE DCG412-XE DCF620KN-XE DCF887N-XE DCV517N-XJ DCD796N-XE 13 DWST1-75694 DWST1-75668 DWST1-75654 DWST1-79210 Either scan and e-mail to: NZredemptions@DEWALT.com or go online at: www.guaranteedtough.co.nz Alternatively, return by post to: DEWALT NZ Bonus Offer, PO Box 12135, Penrose 1642. Delivery may take up to 45 days from receipt of entry, signature required upon delivery, items will not be left unattended. This offer cannot be used in conjunction with any other offer. See website for Terms and Conditions. TERMS & CONDITIONS Please fill in this form and post to DEWALT NZ Bonus Offer, PO Box 12135, Penrose 1642. Alternatively go to www.guaranteedtough.co.nz to lodge a claim. These redemption offers are valid only to those consumers who purchase one of the selected DEWALT NZ products between February 1 - March 31, 2018. Proof of purchase is essential to validate claim. Please send a COPY of your purchase receipt with this claim form. Please provide physical address, no PO. Boxes. Receipt must clearly show model of tool purchased, date of purchase, place of purchase and the price paid to substantiate the claim. DEWALT NZ reserves the right to request further information regarding proof of purchase from the redeemer if circumstances warrant. Keep your original receipt for warranty purposes, as proof of purchase. Goods must be fully paid for at the time of purchase and on ONE receipt to be eligible. DEWALT NZ accepts no liability for claims that may be delayed, misdirected or lost in the mail causing them to not be received by the closing date. Redemption offers will be dispatched within 45 working days of receipt of the claim while stocks last. This redemption offer is not valid to employees of DEWALT NZ. All Redemption Offer claims must be received by 15th April 2018. This promotion cannot be used in conjunction with any other offer, limited stock available. Offer available while stocks last. An alternative redemption item may be provided at the discretion of DEWALT NZ. Offer only valid when product purchased through authorised resellers of DEWALT NZ. 39 Business Parade North East Tamaki Auckland. Telephone: 0800 339 258 Fax: 09 273 3392 The yellow and black colour scheme is used on DeWALT Power Tools and Accessories as a trademark. DeWALT reserves the right to change any deal, price and / or specification at any time without notice.