BL828 APPLICABLE TO 790T

User Manual BL828 APPLICABLE TO 790T Please keep this user manual in your sight, read it thoroughly and carefully before using this product.

Contents Safety Instructions -------------------------------------------------2-7 Product Features ----------------------------------------------------8-9 Humanized Designs-----------------------------------------------------8 Washable Dust bin -----------------------------------------------------8 Automatic Navigation -------------------------------------------------9 Product Components ---------------------------------------------10-14 Main Body and Accessories -------------------------------------------10 Main Body Diagram ---------------------------------------------------11 Dust Bin and Roller Brush Kit -----------------------------------------12 Docking Station and Remote Control ----------------------------------13 Display Panel ----------------------------------------------------------14 Product Operation ------------- ----------------------------------15-20 Battery Charging ------------------------------------------------------15 Power on/standby/sleep Mode ---------------------------------------16 Scheduling --------------------------------------------------------16-18 Cleaning Modes----------------------------------------------------18-19 Dual Modes Switching(Vacuuming and Sweeping)--------------------20 Water Tank Installati on------------------------------------------------20 Product Maintenance---------------------------------------------21-22 Cleaning Side Brushes--------------------------------------------------21 Cleaning Dust Bin and Filters-------------------------------------------21 Cleaning Sensors and Wheels ------------------------------------------22 Cleaning Charging Poles -----------------------------------------------22 Cleaning Suction Passage and Dust Sensor----------------------------22 Cleaning Roller Brush Kit --------------------------------------------23 Product Specifications-----------------------------------------------24 Battery Replacement-------------------------------------------------24 Trouble Shooting-----------------------------------------------------25 Mobile APP Quick Start 1 ----------------------------------------------------26

Safety Instructions Before using this product, please read the safety instructions and follow all regular safety precautions. Warranty service is not applicable to any damage caused by violation of instructions. Proscenic sweeping robot is a sophisticated product which is restricted for indoor cleaning only. DO NOT use the robot for non-cleaning purpose. Please refer to user manual. Warning Sign Danger It indicates that any violations of instruction or improper operation are probably to cause casualties or severe injuries, Caution It indicates that any violations of instruction or improper operation are probably to cause casualties or severe injuries Notice It indicates that any violations of instruction or improper operation are probably to cause injuries to people and damage to property. Graphic and Sign explanation It indicates prohibited behavior. Detailed content refer to the sign or the explanation of the sign. It indicates enforcement behavior. Detailed content referto the sign or the explanation of the sign. It indicates attention (including warning) content. Detailed content refer to the sign or the explanation of the sign. *1. Possible Severe injuries: Blindness, Burns, Electricity Injury, Fracture, Poisoning and other severe injuries that leave sequela and lead to longterm hospitalization. *2. Possible Injuries: Burns, and electricity wound that does not require hospitaliza -tion. *3. Possible Property Damage:Damage to furniture, valuable objects and injuries to pets. 2

Safety Instructions Safety Instructions of Product, Charging dock, power adapter and other accessories. Warning No Disassembling Only authorized technicians can disassemble the product. Users are not allowed to disassemble, repair or modify the product. Otherwise it may possibly cause electric shock, malfunction and leading to injuries. Prohibit dismantling battery case Dismantling battery case may cause damage or leakage of battery that leads to fire or explosion. Prohibit using metal or other conducting substance to con -nect battery postive and negative ends. It will lead to short circuit and cause explosion. Clean Dirt Do not use power adapter with AC inverter. Otherwise it may lead to over heated, malfunction or fire. When there are dust accumulations on the metal terminals of the power plug and surrounding, be sure to clean the dust with dry cloth.otherwise it may lead to electric shock, over temperature or fire. Alternating Current The adapter must use an alternating voltage from 100-240 Vac. Please plug in the socket correctly and avoid children's touch. Only use the original power adapter. It may cause danger. Do not destroy or modify power cord. And do not over-bend,heat, and over-pull or press the inflexible cord with heavy objects..otherwise it will cause damage to cord and lead to fire or electric shock 3

Safety Instructions Never use the product under environment with volatile substance to avoid possibility of fire and danger. Only use the product indoors. This product is a sophisticated machine for indoor use only. DO NOT leave the product to children without supervision. Otherwise it may cause injury. Do not use this product under flammable or combustible environment.use this product under propane gas, gasoline and other flammable gas, dust environment; it will lead to explosion or fire. Do not wash and do not leave this product in wet or mois -ture environment. Do not wash main body, charging device and virtual wall. Washing or soaking will cause internal short circuit. Do not sit on top of this product. Do not allow adults, children or animals to sit on this product to avoid damage to the product or falling down. Do not touch. To avoid stumbling, all people in the house should be notic -ed when this product is on. Do not touch the wheels or roll -er brush while product in operation to avoid being stumbl -ed by the machine, especially children. Notice Do not touch. Do not touch the power cord, plug or adapter with wet hands. Otherwise, it may cause electric shock. 4

Safety Instructions Turn off the power Turn off the power switch when you don't need to use this product for a long time. Battery leakage may cause fire, injury or pollution to enviroment. Cut off power source when using power adapter and disconnect the plug from socket. Other -wise, it may cause fire. Do not have the product covered or wrapped while using. This product is for indoor use only,do not use this product to clean bathroom, warehouse, factory and bed etc. Air Outlet Put screwdriver or other sharp objects into air outlet will damage this product. Do not wash this product. Only dust bin, filters are washable. Do not wash other parts of this product. Put dust bin, filers back to main body when dry up.do not expose the product under the sun. Charging Notice Danger Use dedicated battery and charging base only. Use other batteries or docking station will cause leak -age, overheating and explosion. 5

Safety Instructions No Disassembling Unplug when not using the product to avoid short circuit. Do not dissemble the battery, otherwise, it will cause leakage, overheating and explosion. Do not keep necklace, hairpin and other metal materials together with this product during transportation. Do not throw the battery into fire or heat the battery. Attention When there is overheating during charging, stop using this product immediately. To extend battery's life, take out the battery and put it in cool and dry place when not using it, Do not immerse or wash this product Do not use this product when there is signs of unusual (chan -ge of color or shape). The battery mush be insulated with tapes when recycling or disposal.contact with other metal will lead to heating, burst or fire. Bring the used battery to technical service center or recycler with authorizd reseller for disposal. Or dispose the battery according to local laws. 6

Safety Instructions Warning Do not keep necklace, hairpin and other metal materials together with this product during transportation. Do not charge this battery on other devices This chargeable battery is designed for this smart robot only. Do not put the battery back to main body or charge it when deformation, swelling and electrolyte leakage are found from battery case. Wash off the battery leakage immediately with clean water when there is contact with skin or clothes.no measures taken will lead to skin inflammation.do not crash or throw the battery. It's not allowed to copy, publish or record this user manual and related material in any searchable media or translate to any other languages without our written authorization. We have made our best efforts to make sure the precision and completeness of this user manual. Any mistakes or omission are found, we sincerely thank you for giving us feedback through our feedback email feedback@proscenic.tw 7

Product Features This is an outstanding and extraordinary automatic cleaning robot which is well equipped with not only cleaning function, double side brushes, strong vacuuming suction, but also with interchangeable roller brush kit and vacu -um suction kit Intelligent Suction Adjustment This product is able to automatically adjust its suction power when different floor environments are detected. This ability not only makes cleaning more efficient, but also helps to save more power (up to 30%) User Friendly Design Operation is simple and easy. Start the robot by touch button. Washable Dust bin Dust bin and filters can be washed by water. Simply wash dust bin under water after use to avoid dust blowing in the air to cause a second pollution! 8

Product Features Automatic Maps Navigation 1. Before use, place the robot flat on floor. 2. Turn on power switch, next, touch Clean button on main body or the ON/OFF button on remote. The display panel shows a countdown from 5, 4, 3, 2, 1 with voice prompt System rebuilding, please wait 3. After countdown, background lights of buttons on main body are all on. /Touch clean button on main body or ON/OFF button on remote one more time to let the robot start cleaning. 4. The robot will return to docking station automatically after cleaning if docking station is power on. If no docking station is detected, the robot will return to the Start Point after cleaning. Start Point docking station 9

MODE CLOCK EDGE Product Components Main Body and Accessories NO. 1 2 3 4 5 6 7 8 9 10 Description Main Body Docking Station Adapter Remote Control (battery not included) Water Tan HEPA Filter Side Brush Mopping cloth User Manual Quantity 1 1 1 1 1 1 4 2 1 PLAN HOME ON/OFF 10

Product Components Main Body Diagram Touch Key LED Display Cover Bumper Bumper Strip Power Switch Suction Component Roller Brush Component Left wheel Bottom Cover Right Wheel Left Side Brush Charging Socket Right Side Brush Battery Cover Front Wheel Auto Charging Pole 11 Dust Bin

Dust Bin Kit Product Components Primary filter Handle Dust bin HEPA filter HEPA filter shelf Roller Brush Kit Roller brush coverplate Roller brush bushing Ball bearing Bearing gluesheath Roller brush Roller brush holder 12

Docking Station Product Components Power Indicator Top Cover Charging Poles Charging Socket Remote 1. Display Screen 2. Auto Charging 3. Direction Button (Only Effective in Standby Mode) 4. Edge Cleaning (Only Effective in Standby Mode) 5. Clock Setting 6. Schedule Setting 7. ON/OF 8. Area Cleaning (Only Effective in Standby Mode) PLAN HOME ON/OFF MODE CLOCK EDGE 8 Note: Install two AAA type batteries into the remote control before use, Remove the batteries if the remote control will be left unused for a long period. 13

Display Panel Product Components charging Clean scheduling EDGE CLEAN Button panel it shows the time setting, charging status, and error codes by using numbers A. Press this button to activate from sleep mode to standby mode. In standby mode, press this button and hold it for more than 3 seconds to go into sleep mode. B. Confirm schedule setting in scheduling mode. C. Start cleaning in standby mode. A. Press this button to increase number in scheduling mode. B. In other mode, press this button to start auto-homing and charg -ing mode. A: Press this button to decrease number in scheduling mode. B: In other mode, press this button to start auto cleaning. In standby/charging mode, press this button to enter/quit robot time setting. Hold this button to enter/quit scheduling mode. Press this button to start edge cleaning in standby mode. 14

Battery Charging 1. Docking station placement Product Operation Place docking station against the wall and remove obstacles from within 1 meter at two sides and about 2 meters in front of the station, as shown in the right figure. If the robot has been shut down, power on the robot by pressing the power switch. side of the robot for more than 3 seconds. 2. Charge the robot in either way as shown below: a. Insert the adapter into the robot and the plug at the other end to the power socket as shown in Figure.a. b. Press on robot or HOME on remote control to operate the robot to go back to the charging station for recharging as shown in Figure.b. Note: a a. When robot is being charged, LED panel will gradually show 1111 from left to right. b. Once charging is complete, LED panel will show FULL. c. In the standby status, the robot will broadcast voice prompt 'Please cha -rge' when battery power is low. d. In the working status, the robot will return to charging station automati -cally when battery power is low. For extending battery life: a. Before first use, charge the robot for 12 hours. b. Charge the robot as soon as possible when battery power is low. c. The robot will return to charging station automatically when it accompli -shes cleaning or battery power is low. d. If the robot is not to be used for a long time, fully charge the battery be -fore use and turn the power switch off. e. If the robot is not to be used for more than 3 months, charge the robot for 12 hours. 15 b

Product Operation Starting Up / Standby / Sleeping / Power Off 1. Starting up a. Make sure the power switch is on(the power switch is at the right side of main body) b. In standby mode, press on main body or ON/OFF on remote control to start cleaning. Note: If robot is in sleep mode, press on main body to wake up the robot from sleep mode, then press again, the robot will start cleaning automatically. 2. Standby Standby means robot has its power switch on, waiting for the user's operation. It can be changed to standby mode by one of the following methods: a. During robot cleaning, press on main body to enter standby mode. b. During robot cleaning, press ON/OFF button on remote control to po -wer off the robot. 3. Sleep In sleep mode, the robot can only be waken up from button on main body or ON/OFF on remote control. In order to save power, you can turn the robot into sleep mode from standby mode via either of the following methods: a. Press on main body and hold it for 3 seconds. b. Robot will automatically enter sleep mode if no command is received for more than 2 minutes How to schedule the robot 1. Schedule on Display Panel on Main Body A. Setting robot clock (Make sure the robot is in standby or power on status) a. Press Schedule button to start clock-setting. the LED panel will show the current system time. b. Then the left two numbers on LED panel will flash.press Home to increase hour or clean to decrease it. 16

Product Operation c. Press to enter minute-setting mode, the right two numbers on LED panel will flash. Press to increase it or Clean to decrease it. d. Press button to save the setting, then press schedule to exit (Before the setting is saved, if press Schedule to exit, the current setting will be invalid). B. Setting the scheduling time (Make sure the robot is in standby or power on status) a. Press schedule and hold it for 3 seconds to start scheduling, then the left two numbers on LED panel will flash. b.press Home button to increase hour or Clean button to decrea -se it. c. Press to enter minute-setting mode, the right two numbers on LED panel will flash, press Home button to increase it or Clean button to decrease it. d. Press again to save the setting, then press Schedule button to exit (Before the setting is saved, if press Schedule to exit, the current setting will be invalid). C. Cancel the scheduling Set the scheduling time to 00:00. Note: a. Before scheduling, please set the robot time to be the same with real time. b. The robot will start cleaning at the schedule time of Robot Clock every day. Schedule has to be reset again after the power switch has been turned off. 2. Schedule on Remote Control A. Scheduling Setting a. Make sure the robot is in standby or charging status. Press Schedule button on remote and hold it for 3 seconds to enter scheduling mode. b. Then numbers on LED screen on the remote will flash. Change flash -ing numbers by pressing Up or Down button. Press Left/ Right button to set next digit when finishing the setting of previous digit. 17 c. When finish setting, with the remote pointing to the robot, press ON/OFF button on remote. Display panel will show corresponding time when it's been scheduled successfully.

Product Operation Note: The numbers show on remote is delay time during scheduling. For example: If current time is 8:00am, and remote setting number is 01:00. If it has been successfully saved, the robot will start working in1 hour. It means 9:00am has been scheduled as working time and the robot will start cleaning at 9:00am everyday. B. Cancel the scheduling Press Schedule on remote to enter scheduling mode, then press ON/OFF button one more time.(display screen on main body will show 00:00 when the scheduling has been cancelled. If not, press ON/OFF one more time. Note: a. During time scheduling, press ON/OFF on remote to set hour and minute; press Schedule to enter/quit schedule setting. b. The ON/OFF on remote has the same function as on main body. Cleaning Modes Four cleaning modes to meet your different needs. 1. Auto cleaning Press Clean on robot or Clean on remote control to start auto cleaning. Robot enters auto cleaning mode. 2. Area cleaning Press MODE on remote to enter area cleaning. a. Choose area cleaning mode 1, the screen on remote will show MODE 1 and the robot will clean about 1*1m square area line by line. 18

Product Operation b. Choose area cleaning mode 2, the screen on remote will show MODE 2 and the robot will clean about 2*2m square area line by line. c. Choose area cleaning mode 3, the screen on remote will show MODE 3 and the robot will clean about 3*3m square area line by line. d. Choose area cleaning mode 4, the screen on remote will show MODE 4 and the robot will clean about 4*4m square area line by line. The robot will all return to its start point when above cleaning modes completed. 3. Edge cleaning In cleaning mode, press to enter edge cleaning mode. The robot will clean along the walls. 4. Schedule cleaning Schedule the robot's cleaning according to yourneed. And our robot will start clean -ing as scheduled. 19

Product Operation Vacuuming and Sweeping Switching (Applicable to certain models, consult your customer service) The suction kit and the roller brush kit are replaceable. You can install accordingly as below as your need Suction Component Roller Brush Component Left wheel Bottom Cover Right Wheel Left Side Brush Charging Socket Right Side Brush Battery Cover Front Wheel Auto Charging Pole Ultrasonic Dectetion End Water Tank and Mopping Cloth Usage 1. Sticking mopping cloth To stick mopping cloth on the bottom of water tank as shown in figure 1, make sure the sticking side and mopping cloth are facing the appropria -tely, and then to stick the mopping cloth on its sticking side. 2. Fill water tank with water Take out rubber plug of water tank as shown in figure 2, fill it with water, and then put back the rubber plug tightly at its position in case of water leakage.shake the water tank plug after installation to make sure there is water leaking from seepage hole After that, install the water tank kit under the bottom of main body. 3. Fit water tank on the robot Turn over the robot, fix the water tank on the robot bottom, make sure its bolts are firmly, pressed into the fixing slots as figure 3. Mop water tank rubber cap Fig 1 Fig 2 Fig 3 20

Product Maintenance Cleaning Side Brushes 1.Make sure side brushes are not damaged and no foreign matter among them. 2. Use cleaning kit or cloth to clean side brushes. 3. Remove side brushed and put them in warm water for five seconds can solve side brushes tangling and deformation. 4. Replace side brushes when they are worn. Cleaning Dust Bin and Filters Empty and clean the dust bin after each use following the steps as shown in the figures below. Take out the dust bin. Take out the HEPA. Open dust bin cover, take cut primary filter. Empty the dust bin. Wash dust bin and filter, clean the HEPA with brush. Install the primary filter and HEPA back into the dust bin. Note: a. Wash the HEPA and primary filter after used for 15~30 days. Max life span for HEPA and primary filter is 24 months. b. Reinstall the HEPA and primary filter after they are fully dry. c. HEPA and primary filter could be replaced if needed. d. Do not dry the filters under baking sunshine. 21

Cleaning Sensors and Wheels Slightly wipe all the sensors and wheels, as marked in figure below, with soft cleaning cloth or tool. Cleaning Charging Poles Clean the charging poles, as marked in figure below, with soft cleaning cloth or tool. Clean the charging poles with soft dry cloth when there is bad contact. Clean the charging poles with soft dry cloth when there is bad contact. Cleaning Suction Passage and Spot Cleaning Sensors Remove suction passage kit from main body. Clean the suction passage and dust sensors, as marked in figure below, with soft cleaning cloth or tool. Note: Avoid allowing the sensors to get wet by water, thinner, etc. 22

Product Maintenance Kit Cleaning Roller Brush Take out and disassemble the roller brush kit as shown in figure below, and clean it with soft cleaning cloth or tool. (The roller brush axle is washable) Note: Please re-install the roller brush axle after it is fully dry. 23

Product Specifications Product Specifications Classification Item Detail Mechanical Specifications Diameter Height Weight 350mm 99mm 3.7Kg Electrical Specifications Power Rating 14.4V Cleaning Specifications Charging Type Cleaning Mode Auto Charging/ Manual Charging Auto, Area, Edge, Schedule Main Body Button Type Charging Time Cleaning Time 4~6 hours 100 mins Touch pad (LED display) Battery Removal 1. Unscrew the screws on battery cover with a screw driver 2. Remove the battery capsule cover 3. Take out the battery 4. Push the electrode tips connected the battery and main body. 5. Put the new battery into the battery case with the battery label facing up 6. Plug the wire connector that connects the battery and robot. 7. Reorganize the wire connector and wires. 8. Reinstall the battery door 9. Lock the battery capsule cover Notice: Do not use non original battery. It may cause damage to the robot. 24

Troubleshooting Error Code Number Error code Cause 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 E1 E2 E3 E11 E12 E13 E21 E22 E31 E32 E33 E41 E42 E43 E44 E45 E46 L0 11:11 FULL Dust bin not well located or robot without dust bin Power switch off during charging Low voltage power supply or auto charging failure Left anti-drop sensor detect cliff Right anti-drop sensor detect cliff Front anti-drop sensor detect cliff Left wheel drop Right wheel drop Front bumper wall detection sensors and left infrared sensors detect obstacle Front bumper wall detection sensors, right infrared Front bumper wall detection sensors and front infrared Left wheel overloaded Right wheel overloaded Left side brush overloaded Right side brush overloaded Right wheel overloaded Roller brush overloaded Low battery Charging Charging Completed Notice: If above solution does not work, please try below: a. Reset the robot by switching off the unit and then turn it on, and check again. b. If it still does not work after reset, contact after sales support service@proscenic.tw 25

Mobile APP Quick Start Proscenic Mobile APP is available on ios and Android. 1. Go to Apple App Store (ios) or Google Play (Android), search Proscenic, download and install. 2. Run the app and signup an account for the first time. 3. Please make sure your phone is connected to current WIFI. 4. Hold charging button on the robot until you hear a Chime. 5. Robot should have CONN displayed, and Click the Search robot button. 6. Enjoy your app. 26