ISO Interface Solenoid Valve/SIZq Metal Seal SeriesVS7-6 VS7-6-FPG-D VS7-6-FG-D Accessories Mounting bolt (with washer) Packing Indicator Iight Optional Specifications VS7-6-FG-S Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. TA-B-5 X 35 AXT500-13 (Option) VS7-6-FHG-D Surge voltage Available suppressor Reverse R1/R port: Pressure in pressure R1=P1 pressure R=P pressure, P1=P < position 3 position Option Single solenoid (FG-S) Double solenoid (FG-D) Reverse pressure (YZ-S) Reverse pressure (YZ-D) Closed centre (FHG-D) xhaust centre (FJG-D) Double pilot check (FPG-D) Pressure centre (FLG-D) Standard Specifications Fluid Operating pressure Ambient and fluid temperature Manual override lectrical entry Lubrication Part No. A A A A AXT511 B-1 (V) AXT511 B- (V) AXT511 B-3 (V) AXT511 B-4 (V) Rated voltage (V) 0V AC 50/60 Hz 00V AC 50/60 Hz 4V DC 1V DC Inrush current (A) 0.049/0.043 0.04/0.01 Holding current (A) 0.031/0.00 0.015/0.01 0.075 0.15 Allowable voltage (V) 85 to 1% of rated voltage Insulation Class B (130 o C) or equivalent A: With -M4 X 46 bolts for position valve, B: With -M4 X 54 bolts for 3 position valve Note) Based on JIS C4003. (V): Pilot XH individual style. Interface regulator model (1) Applicable solenoid valve Regulation port Proof pressure Max. operating pressure Set pressure range Ambient and fluid temperature Pressure gauge port size Weight (kg) Air supply side eff. area S (P=0.7MPa, P1=0.5MPa) () (mm ) Air exhaust side eff. area S (P=0.5MPa) () No. of positions (Single) (Double) 3 (Closed centre) 3 (xhaust centre) 3 (Pilot check) Model VS7-6-FG-S- -Q VS7-6-FG-D- -Q VS7-6-FHG-D- -Q VS7-6-FJG-D- -Q VS7-6-FPG-D- -Q ffective area (With 1 4 sub-plate) (mm ) (Nl/min) 7 (147.5) 7 (147.5) 5.5 (1374.) 7 (1374.) 0 (79.65) (1) Min. operating frequency is based on JIS B8375. (Once every 30 days) () Based on JIS B8375-1975 (At 0.5MPa) Air/lnert gas 0.1 to 1.0MPa 5 to 60 o C Non-locking style, Locking style DIN connector Non-lube If provided, use turbine oil (ISO, VG3) 150/50 m/s Shock resistance (Vibration resistance) (1) Applicable sub-plate VS7-1 (ISO size q) Option Note) Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve and armature, for both energized and de-energized states. (Value in the initial stage.) Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 000 Hz. Test was performed at both energized and de-energized states to the axis and right angle directions of the main valve and armature. (Value in the initial stage.) Pilot Valve/Spacifications Option/Interface regulator Model P/A P/B A/A B/B ARB50 VS7-6 A B P 1.5MPa 1.0MPa 0.1 to 0.83 Mpa 5 to 60 o C 1 8 15 16 Max. operating rate (1) (cycle/sec.) 0 0 0.55 16 16 5 mm 18 mm Note 1) Use "ABR" for pressure centre style and reverse pressure style. Note ) Synthesized effective area with position single style solenoid valve. 13 11 Response time () (sec) 0.05 or less 0.015 or less 0.045 or less 0.045 or less 0.05 or less Weight (3) (kg) 0.460 0.560 0.635 0.635 0.990 (3) Weight without sub-plate (Sub-plate: 0.37kg) (4) (1) and () are the rates in the condition of controlled clean air. 1.19-1
VS7-6 Double Pilot Check Spacer/Series FPG Cylinder mid-stroke, long term retention possible. The use of the double pilot check spacer equipped with a built-in double check valve enables the cylinder to stop and remain at mid-stroke for long periods regardless of air leakage between the spool and sleeve. 3 Position Double Pilot Check Valve (Wedge packing style) VS7-6-FHG-D- R 3 position double pilot check valve achieves a reduction in air leakage as a result of main valve construction which features co-axial wedge packing (Max. leakage: cm 3 /min (ANR)). Double Pilot Check Spacer Specifications Double pilot check spacer model Applicable solenoid valve/air operated valve Leakage (cm 3 /min (ANR)) With one side solenoid energized. (With one side pilot air pressured) Both sides solenoids de-energized. (With both sides pilots not air pressured) Check Valve/Operation Pressure Characteristics The check valve will operate correctly providing that cylinder side pressure is not in excess of two times the supply pressure. P P B A VV71-FPG Series VS7-6/VSA7-6 R1 R R1 R R1 R 130 130 Cylinder Speed/Stop Position Range 0 Caution Verify that there is no leakage from the pipes between valve and cylinder, and from fittings. Check for leaks by using neutral detergent solution before use. Also check the cylinder packing and the piston packing. If there is leakage, cylinder may not stop at the mid-stroke position, and could move immediately after the valve is de-energized. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. Cylinder Operation Chart Cylinder ø50-450 st ø80-450 st Supply Load factor pressure Load ø50 ø80 0.MPa 5kg 51% 8% 0.5 5 5 11 0. 35 7 39 0.5 35 36 16 1.19-
VS7-6 How to Order VS7 6 FG S 1 Q Symbol Number of solenoid Rated voltage Option Port size of sub-plate Connector S Single None Without sub-plate Connector FJG D Double N Indicator light A0 Side piping 1 4 0 W/o connector FG YZ FHG Option Ordering source area code Code areas Japan, Asia - Australia urope N North America FPG FIG Order Made 1 3 4 Precautions 9 0V AC 00V AC 4V DC 1V DC Others (50V or less) Contact SMC for other voltages (9) Protective class class I (Mark: ) M Direct manual override A03 Side piping 3 8 Indicator light with surge Z voltage suppressor B0 Bottom piping 1 4 Wedge packing style with MR direct manual override B03 Bottom piping 3 8 R Wedge packing style R port: 3 8 V Individual pilot XH If specifying more than one symbol, indicate them in the alphabetical order. Note: Manifold exploded view see page 1.19-33 for details. Thread Rc (PT) F G (PF) N NPT T NPTF Be sure to read before handling. Refer to p.0-33 to 0-36 for Safety Instructions and common precautions. Caution DIN Connector (Wiring) Power Source and Wiring qmake sure all contacts are secure. wvoltage should be held within the allowable voltage range. Specifications Interface regulator model Applicable solenoid valve Regulation port Max. operating pressure Setting pressure range Ambient and fluid temperature Pressure gauge port size Weight (kg) Air supply side eff area (mm ) S (P=0.7MPa, P1=0.5MPa) Air exhaust side eff area S (P=0.5MPa) How to calculate flow rate Refer to p.0-36 for flow rate calculations. Interface Regulator Specifications P P A B A B A B ARB50 VS7-6 A B P 1.0MPa (1) 0.1 to 0.83MPa (1) 5 to 60 o C (3) 15 16 1 8 0.55 16 16 5 mm 18 mm Note 1) Maximum operating pressure of solenoid valve is 0.9 MPa. Note ) Be sure to set pressure within setting pressure range of the solenoid valve. Note 3) Solenoid valve: Max. 50 o C Note 4) Synthesized effective area with position single style solenoid valve. Note 5) Supply pressure to interface regulator only from P port except when it is used with reverse pressure style valve. Use the ARB or ARB3 model to combine a pressure centre valve and the A and B port pressure reduction of a spacer style regulator. Use the ARB or ARB3 model to combine a reverse pressure valve and a spacer style regulator. The P port pressure reduction cannot be used. To use a perfect valve and a spacer style regulator, use a manifold or a sub plate as the standard and stack in the following order: the perfect spacer, spacer style regulator, and the valve. When a closed centre valve is combined with the A and B port pressure reduction of a spacer style regulator, it cannot be used for intermediate stops of the cylinder because of the leakage from the relief port of the regulator. 13 11 1.19-3
VS7-6 Construction VS7-6-FG-S- -Q VS7-6-FG-D- -Q VS7-6-FHG- -Q VS7-6-FJG- -Q VS7-6-FPG- -Q VS7-6-FHG-D- R-Q Replacement Parts No. Description Part No. Material VS7-6-FG-S VS7-6-FG-D VS7-6-FHG VS7-6-FJG VS7-6-FPG q w e r t SUS NBR NBR NBR NBR AXT500-1- AXT500-13 AXT503-35 AXT503-1-1 MY-11N AXT500-13 AXT503-35 AXT503-1-1 MY-11N VFS3000-17- AXT500-13 AXT503-35 AXT503-1-1 MY-11N VFS3000-17- AXT500-13 AXT503-35 AXT503-1-1 MY-11N VFS3000-17- AXT500-13 AXT503-35 AXT503-1-1 MY-11N y u i o Return spring Gasket Gasket Gasket Mini-Y-packing Pilot valve assembly Detent assembly Double pilot check spacer Packing NBR AXT511A- AXT511A- AXT511B- AXT500-9 AXT643--1 AXT511B- AXT511B- VV71-FPG 1.19-4
VS7-6 Without Sub-plate/Dimensions VS7-6-FG-S- -Q VS7-6-FG-D- -Q ( ): In case of direct manual override style. VS7-6-FHG- -Q VS7-6-FJG- -Q VS7-6-FPG- -Q ( ): In case of direct manual override style. 1.19-5
VS7-6 With Sub-plate/Dimensions VS7-6-FG-S- Port size of sub-plate -Q VS7-6-FG-D- Port size of sub-plate -Q VS7-6-FHG- Port size of sub-plate -Q VS7-6-FJG- Port size of sub-plate -Q VS7-6-FPG- Port size of sub-plate -Q ( ): In case of direct manual override style. 1.19-6
VS7-6 Interface Speed Control Interface Speed Control AXT503-3A Symbol Interface Regulator Interface Regulator/Dimensions P regulation/arb50-00-p Symbol P port regulation A port regulation/arb50-00-a B port regulation/arb50-00-b A port regulation B port regulation 1.19-7
Series VS7-6 Sub-plate Sub-plate: Series VS7-1/VSA7-1 Specifications Applicable solenoid valve/air operated valve Sub-plate size Piping Weight All R ports: 3 8 Series ISO size q ISO size q Side piping 1 4 3 8 Bottom piping 1 4 3 8 0.37kg How to Order Dimensions VS7 1 A0 A0 A03 B0 B03 Piping Side piping 1 4 Side piping 3 8 Bottom piping 1 4 Bottom piping 3 8 R port: 3 8 Thread Rc (PT) F G (PF) N NPT T NPTF Ordering source area code Code areas Japan, Asia - Australia urope N North America Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. Model VS7-1-A0 VS7-1-A03 VS7-1-B0 VS7-1-B03 Piping Side Side Bottom Bottom Port size P, A, B R1, R 1 4 3 8 3 8 1 4 3 8 3 8 1.19-8
Series VS7-6 Manifold Manifold: Series VV71 Standard Specifications Manifold block size Applicable solenoid valve Number of stations Piping F. R. Unit A, B-port P, R1, R-port Individual SUP spacer Individual XH spacer Gallery blank disc (Differential pressure style) Including F.R.Unit ( equivalent to stations ) ISO size q Series ISO size q 1 to 1 4 3 8 One-touch fitting: ø6, ø8, ø 1 4 3 8 One-touch fitting: ø1 Air filter (Auto drain, Manual drain), Regulator, Pressure switch, Air release valve VV71-P- (0: 1 4,03: 3 8,C: ø) VV71-R- (0: 1 4,03: 3 8,C1: ø1) AXT50-14 The manifold Series VV71 has a wide variety of functions and piping, compatible with virtually any application. Common XH Style very valve is supplied and exhausted by the same SUP and XH ports running through the connected manifolds. This is the most popular configuration. When there are 5 or more stations operating simultaneously and pilot back pressure is 0.kgf/cm or more, it is recommended that all pilot XH ports (P) of the manifold base (4 on U side and on D side, total 6 ports) be open. Also, use AN1-01 for silencer for pilot XH. Individual XH Style very valve has an independent XH port of its own. An Individual XH spacer (VV71-R- ) mounted on the manifold block allows each valve to exhaust individually. Individual SUP Style An Individual SUP spacer (VV71-P- ) mounted on the manifold block allows each valve to be supplied individually. Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. Multiple Pressure SUP Style Allows supply of or more different pressure to one manifold. Put in a gallery blank disc ( AXT50-14 ) between the stations to operate at different pressures. A dual pressure supply can be supplied from both the left and right sides of the manifold. If 3 or more pressures are supplied, the individual SUP spacer should be used. Main XH Back Pressure Block Style If there are many valve stations operating at the same time and main XH back pressure may cause trouble, mount back pressure block plate ( AXT503-37A ) to prevent effects of main XH back pressure. Bottom Piping Style/1/4, 3/8 ( A, B-port ) When side piping appearance is not acceptable or space is limited, either some of, or all ports, can be arranged with bottom piping. Individual Pilot XH Style If there are many valve stations operating at the same time or operation frequency is high, trouble caused by back pressure will be prevented by using individual pilot XH style valve ( VS7-6- - ). 1.19-9
VS7-6 How to Order (Manifold) VV71 5 03R 03D Q Stations Piping/A, B port Control unit Piping/P, R1, R Port 1 1 0R 1 4 (Right) 0D 1 4 (Bottom) 03R 3 8 (Right) 0U 1 4 (Top) A 0L 1 4 (Left) 0B 1 4 (Both sides) Includes F. R. Unit 03L 3 8 (Left) 03D 3 8 (Bottom) AP (equivalent to 0Y 1 4 (Bottom) 03U 3 8 (Top) stations). 03Y 3 8 (Bottom) M 03B 3 8 (Both sides) C6R One-touch for ø6 tube (Right) One-touch fitting for MP C1D C8R One-touch for ø8 tube (Right) ø1 tube (Bottom) CR One-touch for ø tube (Right) One-touch fitting for F C1U ø1 tube (Top)...... C6L One-touch for ø6 tube (Left) C8L One-touch for ø8 tube (Left) CL One-touch for ø tube (Left) Combination Please provide piping specifications. Ordering source area code Code areas Japan, Asia - Australia urope N North America G C Without Filter with auto-drain, regulator, air release valve Filter with auto-drain, regulator, pressure switch, air release valve Filter with manual drain, regulator, air release valve Filter with manual drain, regulator, pressure switch, air release valve Filter with auto-drain, regulator (air release valve-blank) Filter with manual drain, regulator (air release valve-blank) Air release valve (filter, regulator-blank) Air release valve C1B One-touch fitting for ø1 tube (Both sides) Combination Please provide piping specifications. Silencer box SB W/o silencer box Silencer box Mounting position of silencer box is in accordance with piping of R1 and R ports. Air release valve/rated voltage 1 3 4 9 Order Made Without air release valve 0V AC 50/60Hz 00V AC 50/60Hz 4V DC 1V DC Others(50V or less) Contact SMC for other voltages (9) Protective class class I (Mark: ) Note) Manifold exploded view see page 1.19-33 for details F. R. Unit for Manifold Air filter, regulator, pressure switch, air release valve can be directly mounted to the manifold base, simplifying piping. Classification of Control Unit Symbol Control unit Air filter with auto-drain Air filter with manual drain Regulator Air release valve Pressure switch Blank plate (Air release valve) Blank plate (Air filter, Regulator) A AP M MP F G C Options Blank plate Air release valve adaptor plate F. R. Unit Pressure switch Manifold/Applications AXT50-9A (for manifold) AXT50-18A (for air release valve adaptor plate) MP (for control unit/filter regulation valve) MP3 (for pressure switch) AXT50-17A VAW-A (Adaptor plate, filter with auto drain cock, regulator) VAW-M (Adaptor plate, filter with manual drain cock, regulator) IS30-X30 (-M5 X 1) Interface for reverse pressure R1, R individual XH spacer Interface speed control Lock up cylinder adaptor plate Interface Relieving regulator style Main XH back pressure block plate Silencer for pilot XH Residual pressure release valve spacer Individual SUP spacer with residual pressure release valve Double pilot check spacer with residual pressure release valve AXT50-1A-1 ( 3 8 ) VV71-R-03 AXT503-3A AXT50-6A P port regulation ARB50-00- A port regulation B port regulation AXT503-37A AN1-01 VV71-R-AB 0: 1 4 VV71-PR- 03: 3 8 VV71-FPGR Manifold blocks necessary for mounting 1 F. R. Unit/Specifications Air filter (w/auto-drain, w/manual drain) Filtration 5µm Regulator Set press. (secondary) 0.05 to 0.85MPa Pressure switch Pressure regulation range 0.1 to 0.7MPa Contacts 1ab Rated current (Induction load) 15V AC 3A, 50V AC A Air release valve (Single only) Operating press. range 0.1 to 1.0MPa 1.19-
VS7-6 Manifold/Dimensions Common XH ( ): In case of direct manual override style. Individual XH L: Dimensions L n 1 L1 L 7 119 150 16 3 193 05 4 36 48 5 79 91 6 3 334 Manifold weight general formula=0.43n+0.49 (kg) 7 365 377 8 408 40 9 451 463 494 506 n: Station quation L1=43n+64 L=43n+76 ( ): In case of direct manual override style. 1.19-11
VS7-6 Manifold/Dimensions F. R. Unit ( ): In case of direct manual override style. Interface Speed Control L: Dimensions n: Station L n 3 4 5 6 7 8 9 quation L1 L 150 16 193 05 36 48 79 91 3 334 365 377 408 40 451 463 494 506 L1=43n+64 L=43n+76 L3 97 340 383 46 469 51 555 598 641 L3=43n+11 Interface Regulator Bottom Piping 1.19-1
ISO Interface Solenoid Valve/SIZw Metal Seal SeriesVS7-8 Single solenoid ( FG-S ) Double solenoid ( FG-D ) Reverse pressure (YZ-S) Reverse pressure (YZ-D) position VS7-8-FPG-D VS7-8-FHG-D 3 position Closed centre ( FHG-D ) xhaust centre ( FJG-D ) Double pilot check ( FPG-D ) Pressure centre ( FIG-D ) VS7-8-FG-D Accessories Mounting bolt ( with washer ) Packing Indicator Iight Optional Specifications Surge voltage suppressor Reverse pressure VS7-8-FG-S Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. TA-B-6 X 45 AXT5-13 ( Option ) Available R1/R port: Pressure in R1=P1 pressure R=P pressure, P1=P < Option Standard Specifications Fluid Operating pressure Ambient and fluid temperature Manual override lectrical entry Lubrication Part No. AXT511C-1 (V) AXT511C- (V) AXT511C-3 (V) AXT511C-4 (V) Rated voltage (V) 0V AC 50/60 Hz 00V AC 50/60 Hz 4V DC 1V DC Inrush current (A) 0.049/0.043 0.04/0.01 Holding current (A) 0.031/0.0 0.015/0.01 0.075 0.15 Allowable voltage (V) 85 to 1% of rated voltage Insulation Class B (130 o C) or equivalent (V): Pilot XH individual style. Blank plate No. of positions (Single) (Double) 3 (Closed centre) 3 (xhaust centre) 3 (Pilot check) Interface regulator model (1) Applicable solenoid valve Regulation port Proof pressure Max. operating pressure Set pressure range Ambient and fluid temperature Pressure gauge port size Weight (kg) Air supply side eff. area S (P=0.7MPa, P1=0.5MPa) () (mm ) Air exhaust side eff. area S ( P=0.5MPa) () Model VS7-8-FG-S- -Q VS7-8-FG-D- -Q VS7-8-FHG-D- -Q VS7-8-FJG-D- -Q VS7-8-FPG-D- -Q ARB350 VS7-8 A B P 1.5MPa 1.0MPa 0.1 to 0.83 MPa 5 to 60 o C 1 8 0.83 P/A P/B A/A B/B 40 31 31 34 60 mm 53 mm 7 7 Note 1) Use "ABR" for pressure centre style and reverse pressure style. Note ) Synthesized effective area with position single style solenoid valve. AXT51-9A ffective area (WitH 3 8 sub-plate) (mm ) (Nl/min) 58 (3140.80) 58 (3140.80) 58 (3140.80) 58 (3140.80) 40 (159.30) (1) Min. operating frequency is based on JIS B8375. (Once in 30 days) () Based on JIS B8375-1975 (At 0.5MPa) Air/lnert gas 0.1 to 1.0MPa 5 to 60 o C Non-locking style, Locking style DIN connector Non-lube If provided, use turbine oil ( ISO, VG3 ) 150/50 m/s Shock/Vibration resistance (1) Applicable sub-plate VS7- (ISO size w ) Option NOT 1): Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve and armature, for both energized and de-energized states. (Value in the initial stage.) Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 000 Hz. Test was performed at both energized and deenergized states to the axis and right angle directions of the main valve and armature. (Value in the initial stage.) Pilot Valve/Spacifications Option Model Option/Interface Regulator Max. operating rate (1) (cycle/sec) 15 15 8 Response time () (sec) 0.040 or less 0.00 or less 0.05 or less 0.05 or less 0.06 or less Weight (3) (kg) 0.655 0.74 0.89 0.89.1 (3) Weight without sub-plate (Sub-plate: 0.37kg) (4) (1) and () are the rates in the condition of controlled clean air. 1.19-13
VS7-8 Double Pilot Check Spacer/Series FPG Cyinder mid-stroke/long term retention possible. The use of the double pilot check spacer equipped with a built-in double check valve enables the cylinder to stop and remain at mid-stroke for long periods regardless of air leakage between the spool and sleeve. 3 Position Double Pilot Check Valve (Wedge packing style) VS7-8-FHG-D- R 3 position double pilot check valve achieves a reduction in air leakage as a result of main valve construction which features co-axial wedge packing (Max. leakage: cm 3 /min (ANR)). Double Pilot Check Spacer Specifications Double pilot check spacer model Applicable solenoid valve/air operated valve Leakage (cm 3 /min (ANR)) With one side solenoid energized. (With one side pilot air pressured) Both sides solenoids de-energized. (With both sides pilots not air pressured) Check Valve/Operation Pressure Characteristics The check valve will operate correctry providing that cylinder side pressure is not in excess of two times the supply pressure. P P A B VV7-FPG Series VS7-8/VSA7-8 R1 80 R R1 80 R R1 0 R Cylinder Speed/Stop Position Range Caution Verify that there is no leakage from the pipes between valve and cylinder, and from fittings. Check for leaks by using neutral detergent solution before use. Also check the cylinder packing and the piston packing. If there is leakage, cylinder may not stop at the mid-stroke position, and could move immediately after the valve is deenergized. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. Cylinder Operation Chart Cylinder ø50-450 st ø80-450 st Supply Load factor Load pressure ø50 ø80 0.MPa 5kg 51% 8% 0.5 5 5 11 0. 35 7 39 0.5 35 36 16 1.19-14
VS7-8 How to Order VS7 8 FG S 1 Q Thread Rc (PT) F G (PF) N NPT T NPTF Symbol No. of solenoids Rated voltage Option Port size of sub-plate Connector S Single None Without sub-plate Connector FJG D Double N Indicator light A03 3 8 0 W/o connector FG YZ FHG Option Ordering source area code Code areas Japan, Asia - Australia urope N North America FPG FIG Order Made Precautions If specifying more than one symbol, indicate them in alphabetical order. Be sure to read before handling. Refer to p.0-33 to 0-36 for Safety Instructions and common precautions. 1 3 4 9 0V AC 00V AC 4V DC 1V DC Others (50V or less) Contact SMC for other voltages (9) Protective class class I (Mark: ) M Direct manual override Indicator light with surge Z voltage suppressor Wedge packing style with MR direct manual override R Wedge packing style V Individual pilot XH Side piping A04 Side piping 1 A06 Side piping 3 4 B03 Bottom piping 3 8 B04 Bottom piping 1 B06 Bottom piping 3 4 Note: Manifold exploted view see page 1.19-34 for details. Caution DIN Connector (Wiring) Power Source and Wiring qmake sure all contacts are secure. wvoltage should be held within the allowable voltage range. Specifications Interface regulator model Applicable solenoid valve Regulation port Max. operating pressure Set pressure range Ambient and fluid temperature Pressure gauge port size Weight (kg) Air supply side eff. area (mm ) S (P=0.7MPa, P1=0.5MPa) Air exhaust side eff. area S (P=0.5MPa) How to calculate flow rate Refer to p.0-36 for flow rate calculation. Interface Regulator Specifications P P A B A B A B ARB350 VS7-8 A B P 1.0MPa (1) 0.1 to 0.83MPa () 5 to 60 o C (3) 40 31 1 8 0.83 31 34 60 mm 53 mm Note 1) Maximum operating pressure of solenoid valve is 0.9 MPa. Note ) Be sure to set pressure within setting pressure range of the solenoid valve. Note 3) Solenoid valve: Max. 50 o C Note 4) Synthesized effective area with position single style solenoid valve. Note 5) Supply pressure to interface regulator only from P port except when it is used with reverse pressure style valve. Use the ARB or ARB3 model to combine a pressure centre valve and the A and B port pressure reduction of a spacer style regulator. Use the ARB or ARB3 model to combine a reverse pressure valve and a spacer style regulator. The P port pressure reduction cannot be used. To use a perfect valve and a spacer style regulator, use a manifold or a sub plate as the standard and stack in the following order: the perfect spacer, spacer style regulator, and the valve. When a closed centre valve is combined with the A and B port pressure reduction of a spacer style regulator, it cannot be used for intermediate stops of the cylinder because of the leakage from the relief port of the regulator. 7 7 1.19-15
VS7-8 Construction VS7-8-FG-S- -Q VS7-8-FG-D- -Q VS7-8-FHG- -Q VS7-8-FJG- -Q VS7-8-FPG- -Q VS7-8-FHG-D- R-Q Replacement Parts No. q w e r t y u i o Description Return spring Gasket Gasket Gasket Mini-Y-packing Pilot valve assembly Detent assembly Double pilot check spacer Packing Part No. Material VS7-8-FG-S VS7-8-FG-D VS7-8-FHG VS7-8-FJG VS7-8-FPG SUS NBR NBR NBR NBR AXT5-1 AXT5-13 AXT5-14- AXT5-14-1 MY-16N AXT5-13 AXT5-14- AXT5-14-1 MY-16N AXT5-1 AXT5-13 AXT5-14- AXT5-14-1 MY-14N AXT5-1 AXT5-13 AXT5-14- AXT5-14-1 MY-14N AXT5-1 AXT5-13 AXT5-14- AXT5-14-1 MY-14N NBR AXT511C- AXT511C- AXT511C- AXT5-9 AXT644-7-1 AXT511C- AXT511C- VV7-FPG 1.19-16
VS7-8 With Sub-plate/Dimensions VS7-8-FG-S- -Q VS7-8-FG-D- -Q VS7-8-FHG- -Q VS7-8-FJG- -Q VS7-8-FPG- -Q ( ): In case of direct manual override style. 1.19-17
VS7-8 Without Sub-plate/Dimensions VS7-8-FG-S- Port size of sub-plate -Q VS7-8-FG-D- Port size of sub-plate -Q VS7-8-FHG- Port size of sub-plate -Q VS7-8-FJG- Port size of sub-plate -Q VS7-8-FPG- Port size of sub-plate -Q ( ): In case of direct manual override style. Note) Symbol A and B correspond to R1 and R respectively (R1=A, R=B) 1.19-18
VS7-8 Interface Speed Control Interface Speed Control/Dimensions AXT5-3A Symbol Interface Regulator Interface Regulator/Dimensions P port regulation/arb350-00-p Symbol A port regulation/arb350-00-a B port regulation/arb350-00-b P port regulation A port regulation B port regulation 1.19-19
Series VS7-8 Sub-plate Sub-plate: Series VS7-/VSA7- Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. Specifications Applicable solenoid valve/air operated valve Sub-plate size Piping Weight How to Order VS7 A03 A04 A06 B03 A03 Piping Side piping: 3 8 Side piping: 1 Side piping: 3 4 Bottom piping: 3 8 B04 Bottom piping: 1 B06 Bottom piping: 3 4 Ordering source area code Code areas Japan, Asia - Australia urope N North America Thread Rc (PT) F G (PF) N NPT T NPTF Series ISO size w ISO size w Side piping: 3 8, 1 3 4 Bottom piping: 3 8, 1, 3 4 0.68kg ( 3 8, 1 )1.9kg ( 3 4 ) Dimensions Symbol Model Piping Port size A B C D F G H J K L M N O P Q R S T U V W X Y VS7-- A03 A04 Side 3 8, 1 4-M6 11 15.5 75 98 6 30 50 49 3 3 4 31 36 88 16 1 16 47.5 38 16 3 VS7-- B03 B04 Bottom Depth VS7--A06 Side 3 4-M6 4 14 30.5 86 18 7 4 63 6 4 30 55 4 40 116 11 16 3 61.5 11 53 0 30 VS7--B06 Bottom Depth 1 1.19-0
Series VS7-8 Manifold Manifold: Series VV7 Standard Specifications Manifold block size Applicable solenoid valve Number of stations A, B-port Piping P, R1, R-port Individual SUP spacer Individual XH spacer Gallery blank disc (Differential pressure style) ISO Size w Series ISO Size w 1 to 3 8, 1 1, 3 4 VV7-P- VV7-R- AXT51-14-1A (for P port) AXT51-14-A (for R1, R port) The manifold Series VV7 has a wide variety of functions and porting compatible with virtually any application need. Common XH Style very valve is supplied and exhausted by the same SUP and XH ports running through the connected manifolds. This is the most popular configuration. When there are 5 or more stations operating simultaneously and pilot back pressure is 0.kgf/cm or more, it is recommended that all pilot XH ports (P) of the manifold base (4 on U side and on D side, total 6 ports) be opened. Also, use AN1-01 for silencer for pilot XH. Individual XH Style very valve has an independent XH port of its own. An individual XH spacer (VV7-R-03, 04) mounted on the manifold block allows each valve to exhaust individually. Individual SUP Style An individual SUP spacer (VV7-P-03, 04) mounted on the manifold-block allows each valve to be supplied individually. Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. V Type V type allows combinations with valves of varying body size. ( Interface adapter plate VV7-V-1 ) Main XH Back Pressure Block Style If there are many valve stations operating at the same time and main XH back pressure may cause trouble, mount back pressure block plate ( AXT503-37A ) to prevent effects of main XH back pressure. Multiple Pressure SUP Style Allows supply of or more different pressures to one manifold. Put in a gallery blank disc (AXT51-14-1A) between the stations to operate at different pressures. When using a dual pressures supply, the pressure can be supplied from both the left and right sides of the manifold. If 3 or more pressures are supplied, pressure should be supplied from the spacer (VV7- P- ) port. Bottom Piping Style (3/8, 1/) When side piping appearance is not acceptable or space is limited, bottom piping for A or B ports is possible. Individual Pilot XH Style If there are many valve stations operating at the same time or operation frequency is high, trouble caused by back pressure will be prevented by using individual pilot XH style valve ( VS7-8- - V ). 1.19-1
VS7-8 How to Order (Manifold) VV7 5 03R 04D Q Stations Piping/A, B port Air release valve Piping/P, R1, R Port Silencer box Air release valve/voltage 1 1 03R 3 8 (Right) Without air 04D 1 (Bottom) Without Without air 04R 1 (Right) release valve 04U 1 (Top) silencer box release valve 03L 3 8 (Left) With air 04B 1 (Both sides) With 1 0A CV 50/60Hz SB 04L 1 (Left) release valve 06D 3 4 (Bottom) silencer box 00A CV 50/60Hz 03Y 3 8 (Bottom) 06U 3 4 (Top) Mounting position 3 4V DC 04Y 1 (Bottom) 06B 3 4 (Both sides) of silencer box is 4 1V DC Combination in accordance Others 9 Note) When mixing, with piping of R1 (50V or less) inscride a mark and R port. Ordering source area code Contact SMC and designate a Code areas for other voltages (9) separate piping - specification. N...... Japan, Asia Australia urope North America Order Made Protective class class I (Mark: ) Note) Manifold exploded view see page 1.19-34 Option Blank plate Air release valve adaptor plate Interface Relief regulator style Interface for reverse pressure R1, R Individual XH spacer Interface speed control Main XH back pressure block plate Silencer for pilot XH AXT51-9A for air release AXT51-18A valve adaptor plate AXT51-17A P (P port reguralation) ARB350-00- A (A port reguralation) B (B port reguralation) AXT51-19A-1 3 8 AXT51-19A- 1 VV7-R-04 AXT5-3A AXT51-5A AN1-01 1.19-
VS7-8 Manifold/Dimensions L: Dimensions Common XH Size 1 L L1 L n 1 10 176 3 3 4 88 5 344 6 400 7 456 8 51 9 568 64 136 19 48 304 360 416 47 58 584 640 L1 146 0 58 314 370 46 48 538 594 650 3 4 L 16 18 74 330 386 44 498 554 6 666 Manifold weight general formula M=0.96n+0.77 (kg) quation n: stations L1=56n+64 L=56n+80 n: stations L1=56n+90 L=56n+6 ( ): In case of direct manual override style. Individual SUP Individual XH Double pilot check ( ): In case of direct manual override style. 1.19-3
VS7-8 Manifold/Dimensions L: Dimensions V Type Size 1 3 4 L L1 L L1 L n 1 10 176 3 3 4 88 5 344 6 400 7 456 8 51 9 568 64 136 19 48 304 360 416 47 58 584 640 146 0 58 314 370 46 48 538 594 650 16 18 74 330 386 44 498 554 6 666 quation n: stations L1=56n+64 L=56n+80 n: stations L1=56n+90 L=56n+6 ( ): In case of direct manual override style. Interface Speed Control Interface Regulator Bottom Piping ( ): In case of direct manual override style. 1.19-4
Air Operated/SIZqw SeriesVSA7-6/VSA7-8 VSA7-6-FG-D position Single (FG-S) Double (FG-D) Reverse pressure (YZ-S) 3 position Closed centre (FHG-D) xhaust centre (FJG-D) Double pilot check (FPG-D) Pressure centre (FIG-D) VSA7-6-FJG-D VSA7-8-FJG-D VSA7-8-FG-S Ordering source area code Code areas Japan, Asia - Australia urope N North America FG YZ FHG VSA7-6-FG-S VSA7-8-FG-D FJG FPG FIG Passage symbol Option Specifications Fluid Max. operating pressure Min. operating YZ-S, FG-S (1) pressure (3) Others Proof pressure Ambient and fluid temperature Lubrication Shock/Vibration resistance (4) nclosure Manual override Pilot air pressure (3) Model Size q Series VSA 7-6 Air/Inert gas 1.0MPa 0.1MPa 0MPa 1.5MPa to 60 o C () Not required. 150/50m/s Dust proof Non-locking push style (Option) 0.1 to 1.0 to. MPa Note 1) Min. operating pressure should be equivalent to or lower than pilot supply pressure. Note ) Use dry air at the low temperatures. Note 3) Use controlled clean air. Note 4) Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve and armature, for both energized and de-energized states. (Value in the initial stage.) Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 000 Hz. Test was performed at both energized and de-energized states to the axis and right angle directions of the main valve and armature. (Value in the initial stage.) No. of positions (Single) (Double) 3 (Closed) 3 (xhaust) 3 (Pilot check) 3 (Pressure) (Reverse pressure) VSA7 6 8 How to Order Body size SIZq SIZw S D Model VSA7-6-FG-S VSA7-6-FG-D VSA7-6-FHG-D VSA7-6-FJG-D VSA7-6-FPG-D VSA7-6-FIG-D VSA7-6-YZ-S Pilot port position Single Double 1 ffective area (mm )(Nl/min) 7 (147.5) 7 (147.5) 5.5 (1374.) 7 (147.5) 0 (79.65) 5.5 (1374.) 7 (147.5) Pilot port position Pilot cover, PA/PB port Sub-plate, 14X/ 1Y port (P port) Size w Series VSA 7-8 No. of positions (Single) (Double) 3 (Closed) 3 (xhaust) 3 (Pilot check) 3 (Pressure) (Reverse pressure) 6 FG D 1 A03 Model VSA7-8-FG-S VSA7-8-FG-D VSA7-8-FHG-D VSA7-8-FJG-D VSA7-8-FPG-D VSA7-8-FIG-D VSA7-8-YZ-S ffective area (mm )(Nl/min) 58(3140.80) 58(3140.80) 58(3140.80) 58(3140.80) 40(159.30) 58(3140.80) 58(3140.80) Thread Rc (PT) F G (PF) N NPT T NPTF Port size Symbol A0 A03 A04 B0 B03 SizeqSeries VSA 7-6 Side piping 1 4 Side piping 3 8 Bottom piping 1 4 Bottom piping 3 8 SizewSeries VSA 7-8 Side piping 3 8 Side piping 1 Bottom piping 3 8 B04 Bottom piping 1 R port: 3 8 Option (Manual override) Without manual override M With manual override 1.19-5
VSA7-6/VSA7-8 Air Operated/Dimensions SIZq VSA7-6- FG-S- - YG SIZw VSA7-8- FG-S- - YG SIZq VSA7-6-FG-D- - SIZw VSA7-8-FG-D- - ( ): In case of VSA7-8 FHG SIZq VSA7-6- FJG - - FIG FHG SIZw VSA7-8- FJG - - FIG SIZq VSA7-6-FPG-FPG- - SIZw VSA7-8-FPG-FPG- - ( ): In case of VSA7-8 1.19-6
Air Operated: SIZq Manifold Manifold: Series VVA71 Standard Specifications Manifold block size Applicable valve Stations A, B port Piping P, R1, R port Control unit Individual SUP spacer Individual XH spacer Block plate (Differential pressure style) Including F.R. Unit (equivalent to stations). ISO size 1 Series ISO size 1 1 to 1 4, 3 8 One-touch fitting: ø6, ø8, ø 3 8One-touch fitting: ø1 Air filter (Auto drain, Manual drain), Regulator, Pressure switch, Air release valve VV71-P- (0: 1 4,03: 3 8,C: ø) VV71-R- (0: 1 4, 03: 3 8, C: ø) AXT50-14 Manifold application example The manifold Series VVA71 has a wide variety of functions and piping, compatible with virtually any application. Common XH Style very valve is supplied and exhausted by the same SUP and XH ports running through the connected manifolds. This is the most popular configuration. Multiple Pressure SUP Style Allows supply of or more different levels of pressures to one manifold. Put in a gallery blank disc (AXT50-14) between the stations to operate at different pressures. A dual pressure supply can be applied to both the left and right sides of the manifold. If 3 or more pressures are supplied, the individual SUP spacer should be used. How to Order VVA71... Stations 1 1 station... stations Including F.R. Unit ( stations) Piping (A, B port) 0R 1 4 (Right) 03R 3 8 (Right) 0L 1 4 (Left) 03L 3 8 (Left) 0Y 1 4 (Bottom) 03Y 3 8 (Bottom) C6R One-touch fitting ø6 (Right) C8R One-touch fitting ø8 (Right) CR One-touch fitting ø (Right) C6L One-touch fitting ø6 (Left) C8L One-touch fitting ø8 (Left) CL One-touch fitting ø (Left) Mix Indicate piping specifications. 5 03R 03D 1 A AP M MP F G C Bottom Piping Style/1/4, 3/8 (A, B port) When side piping appearance is not acceptable or space is limited, either some of, or all ports, can be arranged with bottom piping. Individual XH Style An individual XH spacer (VVA71-R- ) mounted on the manifold block allows each valve to exhaust individually. Individual SUP Style An individual SUP spacer (VVA71-P- ) mounted on the manifold block allows each valve to be supplied individually. 1 Pilot supply port Valve body side Manifold block side Piping (P, R1, R port) 03D 3 8 (Bottom) 03U 3 8 (Top) 03B 3 8 (Both sides) C1D One-touch fitting ø1 (Bottom) C1U One-touch fitting ø1 (Top) C1B One-touch fitting ø1 (Both sides) Mix Indicate piping specifications. Control Unit None Filter with auto drain, regulator, air release valve Filter with auto drain, regulator, air release valve, pressure switch Filter with manual drain, regulator, air release valve Filter with manual drain, regulator, air release valve, pressure switch Filter with auto drain, regulator (air release valve blank plate) Filter with manual drain, regulator (air release valve blank plate) Air release valve (filter, air release valve blank plate) Air release valve Indicate pilot supply port. 1 VSA7-6-FG-S-1 VSA7-6-FG-S- 1.19-7
VSA7-6/VSA7-8 Manifold/Dimensions L: Dimensions L L1 L n 150 16 3 193 05 4 36 48 5 79 91 6 3 334 7 365 377 8 408 40 9 451 463 494 506 n: Station quation L1=43n+64 L=43n+76 Common XH Individual SUP 1.19-8
VSA7-6/VSA7-8 Manifold/Dimensions Control unit L: Dimensions n: Station L L1 L n 150 16 3 193 05 4 36 48 5 79 91 6 3 334 7 365 377 8 408 40 9 451 463 494 506 quation L1=43n+64 L=43n+76 L3 97 340 383 46 469 51 555 598 641 L3=43n+11 Interface Speed Control Interface Regulator Bottom Piping 1.19-9
Air Operated: SIZw Manifold Manifold: Series VVA7 Standard Specifications Manifold block size Applicable valve Stations Piping Individual SUP spacer Individual XH spacer A, B port P, R1, R port Block plate (Differential pressure style) Including F. R. Unit (equivalent to stations). The manifold Series VVA7 has a wide variety of functions and piping, compatible with virtually any application. Common XH Style very valve is supplied and exhausted by the same SUP and XH ports running through the connected manifolds. This is the most popular configuration. ISO size Series ISO size 1 to 3 8 1 1 3 4 VV7-P- VV7-R- AXT51-14-1A (for P port) AXT51-14-A (for R1, R port) Individual XH Style An individual XH spacer (VVA7-R-03/04) mounted on the manifold block allows each valve to exhaust individually. Individual SUP Style An individual SUP spacer (VVA7-P-03/04) mounted on the manifold block allows each valve to be supplied individually. 1.19-30 V Type V type allows combinations with valves of varying body size. (Interface adapter plate VVA7-V-1) How to Order VVA7 Stations 1 1 station...... stations Piping (A, B port) 03R 3 8 (Right) 04R 1 (Right) 03L 3 8 (Left) 04L 1 (Left) 03Y 3 8 (Bottom) 04Y 1 (Bottom) Mix Indicate piping specifications. 5 03R 04D 1 Air release valve Multiple Pressure SUP Style Allows supply of or more different pressures to one manifold. Put in a gallery blank disc (AXT50-14-1A) between the stations to operate at different pressures. A dual pressure supply can be applied to both the left and right sides of the manifold. If 3 or more pressures are supplied, the individual SUP spacer (VV71-P- ) should be used. Bottom Piping Style/(3/8, /1) When side piping appearance is not acceptable or space is limited, A or B port can be arranged with bottom piping. 1 Pilot supply port Valve body side Manifold block side 1 4 Piping (P, R1, R port) 04D 04U 04B 1 (Bottom) 1 (Top) (Both sides) 06D 3 (Bottom) 06U 06B 3 4 (Top) 3 4(Both sides) Without air release valve With air release valve Indicates pilot supply port. 1 VSA7-6-FG-S-1 VSA7-6-FG-S-
VSA7-6/VSA7-8 Manifold/Dimensions Common XH L: Dimensions Size 1 3 4 L L1 L L1 L n 176 19 0 18 3 3 48 58 74 4 88 304 314 330 5 344 360 370 386 6 400 416 46 44 7 456 47 48 498 8 51 58 538 554 9 568 584 594 6 64 640 650 666 n: Station quation L1=56n+64 L=56n+80 L1=56n+90 L=56n+6 ( ): 3/4 Individual SUP ( ): 3/4 1.19-31
VSA7-6/VSA7-8 Manifold/Dimensions V Type ( ): 3/4 L: Dimensions Size 1 3 4 L L1 L L1 L n 176 19 0 18 3 3 48 58 74 4 88 304 314 330 5 344 360 370 386 6 400 416 46 44 7 456 47 48 498 8 51 58 538 554 9 568 584 594 6 64 640 650 666 n: Station quation L1=56n+64 L=56n+80 L1=56n+90 L=56n+6 Interface Speed Control Interface Regulator Bottom Piping ( ): 3/4 1.19-3
Manifold xploded View VS7-6 VS7-6 D side end plate assembly Tension bolt Manifold block assembly U side end plate assembly < nd plate assembly > AXT50 A <Tension bolt part number > AXT50 34 nd plate position L R AXT50 L side R side P, R port size Ordering source area code 0 Code areas 03 - Japan, Asia C1 Australia urope N North America < Manifold block assembly> 1A Wiring specification A B Side Bottom Ordering source area code Code areas Japan, Asia - Australia urope N North America 1/4 3/8 ø1 One-touch fitting Cylinder port position L R Cylinder port size 0 03 C6 Note 1) C8 Note 1) C Note 1) L side R side 1/4 3/8 ø6 One-touch fitting ø8 One-touch fitting ø One-touch fitting Number of stations 3 For stations For 3 stations For stations Note) These tie-rods are solid pieces for each number of stations. This manifold block assembly includes tension bolts for a single station addition. Note 1) Side ported only < Manifold block replacement parts > Part No. AXT50-19 AXT50-0 AXT50-- AXT50-31 M4 X 8 Description O-ring O-ring Plate Gasket Oval countersunk head screw Qty. 4 1 1 Material NBR NBR SPCC NBR SWRH3 1.19-33
VS7-8 Manifold xploded View VS7-8 D side end plate assembly Manifold block assembly U side end plate assembly < nd plate assembly > AXT51 nd plate position L R L side R side A Ordering source area code Code areas Japan, Asia - Australia urope N North America P, R port size 04 06 C1 < Manifold block replacement parts> Part No. AXT51-13 AS568-0 AS568-00 AXT51-5 AXT51-4 M4X AXT51-6-1 AXT51-6-4 AXT51-6-3 Description O-ring O-ring O-ring Gasket Plate Oval countersunk head screw Connection fitting A Connection fitting B Hexagon socket head screw 1/ 3/4 ø1 One-touch fitting Qty. 1 1 1 Material NBR NBR NBR NBR SPCC SWRH3 <Manifold block assembly> AXT51 1A Wiring specification A B Side Bottom Ordering source area code Code areas Japan, Asia - Australia urope N North America Cylinder port position L R Cylinder port size 03 04 3/8 1/ L side R side 1.19-34
ISO CNOMO Standard Solenoid Valve Metal Seal - SIZSqwe Series VS7 6 8 VS7 6 Size q position Single solenoid (FG-S) Double solenoids (FG-D) VS7 8 Size w 3 position Closed centre (FHG-D) xhaust centre (FJG-D) Pressure centre (FIG-D) VS7 Size e Standard Specifications Fluid Single position position Air and inert gas 0.15 to 0.9 0.1 to 0.9 Operating pressure (MPa) Double 3 position 0.15 to 0.9 Ambient and fluid temperature Max. 50 C Manual operation Non-locking lectrical entry DIN43650 connector Lubrication Unnecessary (Turbine oil class 1 - ISO VG3 if used) nviromental protection rating IP65 Shock/Vibration resistance 300/50m/s Note 1) Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle direction of the main valve and armature, for both energized and de-energized states. Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 000Hz. Test was performed at both energized and de-energized states to the axis and right angle direction of the main valve and armature. (value in the initial stage.) Solenoid interface conforms to CNOMO. Manifold interface to ISO standards. Low power consuption: 1.8W per solenoid. Internal or external pilot supply. Available in ISO 1, and 3 sizes. Large flow capacity. Fast response and long life. Pilot Valve Specifications Rated voltage (V) 0V AC 50/60Hz, 00V AC 50/60Hz, 4V DC, 1V DC DC (W) 1.8 Power AC Inrush current (VA) 5.4 comsuption AC Holding current (VA) 3.6 Allowable voltage (V) -15% to +% of rated voltage Coil insulation Class B (130 C) or equivalent Model No. of positions Size q Model (Single) VS7-6-FG-S- -Q (Double) VS7-6-FG-D- -Q 3 (Closed centre) VS7-6-FHG-D- -Q 3 (xhaust centre) VS7-6-FJG-D- -Q 3 (Pressure centre) VP7-6-FIG-D- -Q Size w (Single) VS7-8-FG-S- -Q (Double) VS7-8-FG-D- -Q 3 (Closed centre) VS7-8-FHG-D- -Q 3 (xhaust centre) VS7-8-FJG-D- -Q 3 (Pressure centre) VS7-8-FIG-D- -Q Flow (Nl/min) 1476 1476 1378 1476 80 3148 3148 3148 3148 3148 Max. operating frequency (Hz) 0 0 0 0 Response time (Ms) 5 15 45 45 45 5 15 45 45 45 Weight (g) 40 518 546 546 546 698 806 850 850 850 Size e (Single) VS7--FG-S- -Q (Double) VS7--FG-D- -Q 3 (Closed centre) VS7--FHG-D- -Q 3 (xhaust centre) VS7--FJG-D- -Q 3 (Pressure centre) VS7--FIG-D- -Q 4900 4900 4690 4690 4690 0 0 5 15 45 45 45 96 6 80 80 80 1.19-35
VS7 6 8 How to Order Valve VS7 6 FG S 3 CV Q SIze 6 ISO 1 8 ISO ISO 3 Configuration Solenoid Voltage S Single FJG D Double 5 FG FHG FIG 6 3 4 9 1V AC, 50/60Hz 0V AC, 50/60Hz 4V DC 1V DC Others (50V or less) Order Made Contact SMC for other voltages (9) How to Order Sub-plate - Size q Specifications Applicable solenoid valve Sub-plate size Piping Weight ) All R ports: 3 8 ISO size 1 ISO size 1 Side piping, 1 4 3 8 Bottom piping, 1 4 3 8 0.37kg How to Order Sub-plate VS7 1 A0 Thread - Rc(PT) F G(PF) N NPT T NPTF Ordering source area code Code areas Japan, Asia - Australia urope N North America Piping and port size A0 Side 1 4 A03 Side 3 8 B0 Bottom 1 4 B03 Bottom 3 8 R port: 3 8 Dimensions Model VS7-1-A0 VS7-1-A03 VS7-1-B0 VS7-1-B03 Piping Side Side Bottom Bottom Port size P, A, B R1, R 1 4 3 8 3 8 1 4 3 8 3 8 1.19-36
ISO/CNOMO type VS7 6 8 Dimemsions with Sub-plate - Size q VS7 6 FG S CV Q VS7 6 FG D CV Q VS7 6 FHG D CV Q VS7 6 FJG D CV Q VS7 6 FIG D CV Q 1.19-37
VS7 6 8 How to Order Sub-plate - Size w Applicable solenoid valve Sub-plate size Piping Weight ISO size ISO size Side piping: 3 8 1, 3 4 Bottom piping: 3 8 1, 3 4 0.68 ( 3 8, 1 ) 1.9 ( 3 4 ) How to Order Sub-plate VS7 A03 Thread - Rc(PT) F G(PF) N NPT T NPTF Ordering source area code Code areas Japan, Asia - Australia urope N North America A03 A04 A06 B03 Piping and Port size Side 3 8 Side 1 Side 3 4 Bottom 3 8 B04 Bottom 1 B06 Bottom 3 4 Dimensions Piping Port size A B C D F G H J K L M N O P Q R S T U V W X Y VS7--A03 Side A04 3 8, 1 11 15.5 75 98 6 VS7--B03 Bottom B04 VS7--A06 Side 3 4 14 30.5 86 18 7 VS7--B06 Bottom 4-M6, 1 Deep 4-M6, 1 Deep 30 50 49 3 3 4 31 36 88 16 1 16 47.5 38 16 3 4 63 6 4 30 55 4 40 116 11 16 3 60 11 53 0 30 1.19-38
ISO/CNOMO type VS7 6 8 Dimemsions with Sub-plate - Size w VS7 8 FG S CV Q VS7 8 FG D CV Q VS7 8 FHG D CV Q VS7 8 FJG D CV Q VS7 8 FIG D CV Q 1.19-39
VS7 6 8 How to Order Manifold Specifications ) These are available for ISO1 and ISO size manifolds and are common to those and on the VS7-6/8 and VQ7-6/8 series valves. For more details on Specificatios, options, how to order and dimensions please refer to these series. How to Order Manifold ) These are available for ISO1 and ISO size manifolds and are common to those and on the VS7-6/8 and VQ7-6/8 series valves. For more details on Specificatios, options, how to order and dimensions please refer to these series. Options ) These are available for ISO1 and ISO size manifolds and are common to those and on the VS7-6/8 and VQ7-6/8 series valves. For more details on Specificatios, options, how to order and dimensions please refer to these series. Dimensions ) These are available for ISO1 and ISO size manifolds and are common to those and on the VS7-6/8 and VQ7-6/8 series valves. For more details on Specificatios, options, how to order and dimensions please refer to these series. 1.19-40