HL-Series Electric Actuator Precision control for linear valves

HL-Series Electric Actuator Precision control for linear valves

Our products are ISO-9001 certified and internationally qualified for hazardous and weather-tight environments. Emerson has been providing reliable actuation technologies for the pipeline, marine, refining, process and production segments of the energy industry and myriad of other industries for decades. They have established themselves as an innovator, with products that fully automate valves under the most rigorous conditions and in some of the most remote areas in the world. Our product quality is supported by ISO 9001 designations indicating full compliance with global standards for quality and documentation. The HL-Series linear actuator is specially designed for linear operation in applications requiring globe valves or other sliding stem valves. It is particularly suitable for operation with Fisher e-easy valves. The compact, lightweight actuator operates with a wide range of output forces and control options to fit your specific requirement. HL-Series actuators are perfect for use in the power, upstream oil and gas, and chemical process industries and in remote operations where compressed air is not readily available. It actuates final control devices including control valves, lockup valves and cut-off valves with linear positioning motions of 0.39 (10 mm) - 4.7 (120 mm). Features Compact design Lightweight with a high grade aluminum housing High corrosion resistance hard anodizing interior and exterior and tough external polyester coating Various output forces from 2950 lbf (4kN) to 18,439 lbf (25 kn) Many voltages available Self-locking with minimum transmission backlash Waterproof and explosion proof with O-ring sealing Handwheel for manual operation with hand / auto lever for power preference Dual limit switches are standard Force switches Space heater with thermostat prevents overheating

Construction Highlights Potentiometer (Optional) Terminal block Position Control Unit (Limit switches & potentiometer) Unique design. Easy adjustment on site. Motor Available in 1 phase, 3 phase, 24v DC and 24v AC. All motors are custom built for high torque, low current and the highest cycle ratings offered. Thrust Limiting Switch (Factory Preset) Thrust limiting switches are wired in series with the motor. Any excess load will trip the switches, then cut electric power to the motor preventing damage to the actuator. Upper base Proportional Control Unit (PCU) (Optional) Proportional Control Unit (4-20mA, 0-10V, 2-10V, 1-5V) Manual Handwheel / Declutch Lever Manual / auto lever and handwheel engagement for emergency manual operation. Drive system will be automatically re-engaged for auto-mode when electric power is re-supplied. Pad lockable for maintenance safety. Driving rod Guide rod Union joint Valve mounting Locking plate

Performance Type (Model) Max. Output Force Operating Time (mm / sec) 60 / 50Hz Max. Stroke Motor Class F Model & Frame Size Rated current (A) 60Hz / 50Hz 1 Phase 3 Phase Duty Cycle IEC 34-1 Number of Handle turns KN mm / sec mm M * F 110V 220V 380V 440V S4 (%) N Kg HL-4KN 4 0.53 / 0.44 50 15 * 70 1.0 / 0.97 0.47 / 0.46 0.33 / 0.42 0.43 / 0.57 50 189 8.5 HL-7KN 7 0.53 / 0.44 70 15 * 70 1.0 / 0.97 0.47 / 0.46 0.33 / 0.42 0.43 / 0.57 50 265 8.5 HL-10KN 10 0.82 / 0.68 80 40 * 80 1.7 / 1.5 0.84 / 0.73 0.28 / 0.37 0.36 / 0.59 50 210 21 HL-12KN 12 0.82 / 0.68 100 40 * 80 1.7 / 1.5 0.84 / 0.73 0.28 / 0.37 0.36 / 0.59 50 260 21 HL-18KN 18 0.83 / 0.69 100 40 * 90 1.67 / 1.4 0.81 / 0.63 0.27 / 0.33 0.34 / 0.55 50 260 33 HL-20KN 20 0.83 / 0.69 120 90 * 90 3.56 / 4.27 1.3 / 1.4 0.42 / 0.51 0.47 / 0.66 50 312 34 HL-25KN 25 0.83 / 0.69 120 90 * 90 3.56 / 4.27 1.3 / 1.4 0.42 / 0.51 0.47 / 0.66 50 312 34 Ordering Information HL - XX X X X X X Weight Unit: mm SIZE ENCLOSURE MOTOR VOLTAGE OPTION 1 OPTION 2 OPTION 3 05 : 5KN 1 : Weather proof (IP67) 1 : 110V AC / 1Ph 0 : N/A 0 : N/A 0 : N/A (STD) 07 : 7KN 2 : Watertight (IP68) 2 : 220V AC / 1Ph 1 : PIU 1 : LCU-D 1 : MBS 10 : 10KN 3 : EX type 3 : 220V AC / 3Ph 2 : CPT 2 : LCU-B 12 : 12KN 4 : 380V AC / 3Ph 3 : PCU 3 : RBP 15 : 15KN 5 : 440V AC / 3Ph 4 : LCU-C 18 : 18KN 6 : 460V AC / 3Ph 20 : 20KN 7 : 24V DC 25 : 25KN Remarks * More details should be consulted with the supplier. Optional Control Units LCU RBB

Standard Specifications Enclosure Weatherproof enclosure IP67, NEMA 4 Power supply 110 / 220V AC 1PH, 380 / 460V AC 3PH 50 / 60Hz, ±10% Control power supply 110 / 220V AC 1PH, 50 / 60Hz, ± 10% Duty cycle (on/off) Duty cycle (modulating) Motor Limit switches Additional limit switches Torque switches Stall protection S2, 100% Max 30 Min S4, 50% Max 300-1600 start / hour Induction motor (reversible motor) 2x open / close, SPDT, 250V AC 15A rating 2x open / close, SPDT, 250V AC 15A rating (except HL-2KN-12KN) Open / Close, SPDT, 250V AC 15A rating Built-in thermal protection Operating temp Open 150 ± 5 / close 97 ± 15 Manual override Self locking Mechanical stopper Space heater Cable entries Lubrication Terminal block Materials Ambient temperature Ambient humidity Anti vibration External coating Declutching mechanism and handwheel Provided by double worm gearing 2x external adjustable screws 10W (110 / 220V AC) Anti-condensation TWO PF3 / 4 Tap (standard type only) Grease moly (EP type) Spring loaded lever push type Steel, aluminum alloy, aluminum bronze, polycarbonate -20 C to +70 C (except option electronic board) 90% RH Max. (non-condensing) Optional Specifications EXA WTA PIU PCU SICU ICU CPT ATEX certified only Watertight enclosure actuator (IP68 10M 72HR) Potentiometer unit (0-1K ohm) X Y Z 6g, 0.2-34Hz, 30 minutes (pl) Anodizing treatment before dry powder and polyester Proportional control unit (input, output 0-10V DC, 4-20mA DC) Semi-lntegral control unit Intelligent digital control unit (Local Control Unit + IMS + phase discriminator) Current position transmitter (output 4-20mA DC) RBP Rechargeable battery backup Except HL -18, 20, 25KN DCM DC motor (24V DC) Except HL -18, 20, 25KN ADCM Multi AC / DC 24V (integral) Except HL -18, 20, 25KN FPA1 Fire proofing actuator 1050 ± 5 / 50min Optional FPA2 Fire proofing actuator 250 ± 5 / 150min Optional

World Area Configuration Centers (WACC) offer sales support, service, inventory and commissioning to our global customers. Choose the WACC or sales office nearest you: NORTH & SOUTH AMERICA 19200 Northwest Freeway Houston TX 77065 USA T +1 281 477 4100 F +1 281 477 2809 Av. Hollingsworth 325 Iporanga Sorocaba SP 18087-105 Brazil T +55 15 3238 3788 F +55 15 3228 3300 ASIA PACIFIC No. 9 Gul Road #01-02 Singapore 629361 T +65 6501 4600 F +65 6268 0028 No. 1 Lai Yuan Road Wuqing Development Area Tianjin 301700 P. R. China T +86 22 8212 3300 F +86 22 8212 3308 MIDDLE EAST & AFRICA P. O. Box 17033 Dubai United Arab Emirates T +971 4 811 8100 F +971 4 886 5465 P. O. Box 10305 Jubail 31961 Saudi Arabia T +966 3 340 8650 F +966 3 340 8790 24 Angus Crescent Longmeadow Business Estate East P.O. Box 6908 Greenstone 1616 Modderfontein Extension 5 South Africa T +27 11 451 3700 F +27 11 451 3800 EUROPE Berenyi u. 72-100 Videoton Industry Park Building #230 Székesfehérvár 8000 Hungary T +36 22 53 09 50 F +36 22 54 37 00 2017 Emerson. All rights reserved. For complete list of sales and manufacturing sites, please visit www.emerson.com/actuationtechnologieslocations Or contact us at info.actuationtechnologies@emerson.com The Emerson logo is a trademark and service mark of Emerson Electric Co. EIM is a mark of one of the Emerson family of companies. All other marks are property of their respective owners. www.emerson.com/eim DOC.6P.HL.US Rev B 06-17