Altra Industrial Motion. Hydraulic Power Unit 2-Stage Braking

Similar documents
Altra Industrial Motion. Hydraulic Power Unit 2-Stage Braking

Servo Motor Brakes (SMB)

Form-Flex BP & B5 P-5015-TBW Form 1186A

Altra Industrial Motion. Sure-Flex Plus and Dura-Flex Couplings Interchange

A l t r a I n d u s t r i a l M o t i o n. Capping Solutions for the Bottling Industry

B-Track K4x Rugged Duty Actuator

TB Wood s Belted Drive Selection Program BeltDriveSelector.TBWoods.com

Altra Industrial Motion. Application Guide Overrunning Clutches

A l t r a I n d u s t r i a l M o t i o n. Thrustor Brakes for Hoist, Cranes and Mining Applications

A l t r a I n d u s t r i a l M o t i o n. Wind Energy Products Disc Brakes and Rotorlocks

A l t r a I n d u s t r i a l M o t i o n. Heavy Duty & Overrunning Clutch Brake Group Overview

Altra High Performance

A l t r a I n d u s t r i a l M o t i o n. Altra High Performance Couplings

Altra Industrial Motion. AquaMakks Water Cooled Clutches and Brakes

Power Transmission Solutions for Outdoor Power Equipment

Braking Systems for Flat-Top and Luffing Cranes

A l t r a I n d u s t r i a l M o t i o n. Universal Driveshafts for Irrigation Applications

Turning, Locking, & Braking Systems for Marine Propulsion

A l t r a I n d u s t r i a l M o t i o n. Geared Cam Limit Switches for Wind Turbines

A l t r a I n d u s t r i a l M o t i o n Series Taper Grid Resilient Couplings for Protection from Shock, Misalignment and Vibration

A l t r a I n d u s t r i a l M o t i o n. Controls and Sensors for Cranes and Compact Hoistings

A l t r a I n d u s t r i a l M o t i o n. Superior Solutions Introduction to Product & Service Solutions

Turning, Locking, & Braking Systems for Marine Propulsion

G-Flex The Original Bibby Grid Coupling

Power Transmission Solutions for Stage and Theater Applications

A l t r a I n d u s t r i a l M o t i o n. Hydraulically and Pneumatically Operated Clutches and Brakes

Stromag Vector Couplings

A l t r a I n d u s t r i a l M o t i o n. Electric Actuators and Actuator Controls

A l t r a I n d u s t r i a l M o t i o n. Wind Energy Products Disc Brakes and Rotorlocks

360 Engineering & Design Support. Heavy Duty & Overrunning Clutch Brake Group Engineering Capabilities

Power Transmission Solutions for the Metal Processing Market

Altra Industrial Motion. Heavy Duty Clutches and Brakes for Energy & Offshore Applications

Geared Cam Limit Switches Light Cam and Light Cam M

Clutches and Brakes for Energy Efficient Drives with high Standards

Bibby Turboflex Overview

Torsiflex-i Disc Couplings for General Purpose Applications

A l t r a I n d u s t r i a l M o t i o n. Controls and Sensors for Cranes and Compact Hoistings

Geared Cam Limit Switches Light Cam and Light Cam M

Highly Flexible Couplings for Cardan Shafts Solutions for New Technologies

Sprag Clutches Indexing, Backstopping & Overrunning Models

Power Transmission and Motion Control Solutions for Industrial Applications

4 BZFM Brake. for Offshore and Marine Application, flood- and seawater-proof

NFF Brake for Compact Industrial and Crane Applications with a high protection against harsh environments

A l t r a I n d u s t r i a l M o t i o n. Boston Gear QC 700 Series NEMA Flanged Reducer Coupling Style

Standard Clutches and Brakes

Altra Industrial Motion. International standard IEC TS for variable speed motors

A l t r a I n d u s t r i a l M o t i o n. SIME Brakes Industrial Braking Systems

Power Transmission Solutions for the Forklift Truck & Electric Vehicle Market

Altra Industrial Motion. Gearing & Motor Solutions for The Food & Beverage Industry

A l t r a I n d u s t r i a l M o t i o n. Stainless Steel Mounted Bearings, Shaft Couplings & Universal Joints

Power Transmission Solutions for the Wastewater Market

A L T R A I N D U S T R I A L M O T I O N Air Motors

CSK One Way Bearing Clutches

Power Transmission Solutions for the Power Generation Industry

Mesur-Fil Fluid Couplings

Power Transmission Solutions for the Oil & Gas Market

Dura-Flex Elastomeric Couplings (Metric)

Bridling Colorado Coal Mine Conveyors

Torsiflex-I Coupling P-5022-TBW-A4

Advanced Braking Technologies for Mining Conveyors

Power Transmission Solutions for the Farm and Agriculture Market

Flexible Disc Couplings and Bearing Isolators

Altra Industrial Motion. Control Regulate Drive with inverter driven geared motors series EtaK2.0

A l t r a I n d u s t r i a l M o t i o n. Rigid Couplings & Shaft Collars

Spacers, Pillars and Stand-offs

A l t r a I n d u s t r i a l M o t i o n. Torsiflex Disc Couplings for General Purpose & Process Applications

CECON. Clutches Completely Enclosed for Continuous Operation

H-Track Electric Linear Actuator System

Power Transmission Solutions for the Mobile Power Equipment Market

Backstop to Prevent Reversal of Inclined Conveyor and Vertical Bucket Elevators

A l t r a I n d u s t r i a l M o t i o n. (SG) Steel Gear Couplings

A l t r a I n d u s t r i a l M o t i o n. Altra High Performance Couplings

A l t r a I n d u s t r i a l M o t i o n. FBA Flywheel Couplings

Altra Industrial Motion Warner Electric TB Wood s Boston Gear Altra Industrial Motion - Asia Pacific and Africa Servo Motor Brakes

One-Way CEBMAG. Backstops For Kiln Emergency Drive Protection

Hydrostatic Speed Variator K2, K4, K5 Units

A l t r a I n d u s t r i a l M o t i o n. Heavy Duty & Overrunning Clutch Brake Group Overview

Belt Conveyor Holdbacks

Altra Industrial Motion. Hygienic drive solutions for the beverage industry

Releasable Clutch Technology Trends For Mine Conveyors

Washdown Gear Drives & Gear Motors for the Food & Beverage Industry

Electromagnetic Clutch and Brake Combinations Series EM/EMER/EP

Permanent Magnet and Magnetic Particle Clutches and Brakes

Altra Industrial Motion. Hygienic drive solutions for the food industry

Pump Applications Contact Information

A l t r a I n d u s t r i a l M o t i o n. Superflex Super-Elastic Couplings

Altra Industrial Motion. Application Guide Overrunning Clutches

A l t r a I n d u s t r i a l M o t i o n. DELTA Series Cost-Effective Solutions for Diesel-Driven Hydrostatic Machinery

Engine, Pump and Compressor Power Take-Off Clutches

Disc Couplings 101. Ameridrives. Bauer Gear Motor. Bibby Turboflex. Boston Gear. Delroyd Worm Gear. Formsprag Clutch. Guardian Couplings.

Amerigear Mill Spindles Heavy Duty, High Performance Design

Series 2000 Right Angle Helical Bevel Gear Drives and Gear Motors Interchange

Clutch/Brakes for Lawn & Garden Equipment

Power. Solutions for the Tidal Turbine Market. Twiflex Limited. Bibby Turboflex. A l t r a I n d u s t r i a l M o t i o n.

Superior. Svendborg Brakes is the global market leader in intelligent braking solutions. This is why.

A l t r a I n d u s t r i a l M o t i o n. Capping Solutions for the Bottling Industry

Enclosed Drives for Moveable Bridges Specification Consistency

A l t r a I n d u s t r i a l M o t i o n. Curved Jaw Couplings

Altra Industrial Motion. FL Flywheel Coupling/ Guardex TM Type FLD Pulley Coupling

A l t r a I n d u s t r i a l M o t i o n. Gear Grip

Transcription:

Altra Industrial Motion Hydraulic Power Unit 2-Stage Braking

Svendborg Brakes Hydraulic Power Unit 2-Stage Braking WHERE TO USE The 2-stage hydraulic power unit provide a 2-stage controlled braking sequence for use with hydraulic fail-safe spring applied disc brakes. The 2-stage braking sequence is used to prevent a hard braking sequence, which in worst case can cause too high stress on the mechanical parts, or unwanted wear of the system through uncontrolled braking. BRAKING RFORMANCE During opening of the brakes the pressure is build up and thereby opening the brake(s). The first stage of the braking sequence is dumping the pressure to the correct pressure and after the 2-stage braking time the pressure is smoothly reduced and thereby increasing the braking torque. Hydraulic force > Spring force Pad is lifted away from disc Hydraulic force = Spring force Pad touches the disc without braking Zero Braking Torque Hydraulic force = 0 Spring force has full force/effect Max Braking torque is zero and machinery can work freely. This can be detected by the brake on/off indicator if such is part of the power unit Brake off signal given Specified short retraction time Quick start Brakes fully retracted. This can be detected by mechanical/inductive sensor if brake is equipped with this Brake on signal given or power supply failure t (= 2-stage time) Predefined reduced braking torque for a predefined time Braking torque is constant at max. Rpm will decrease and finally machinery will come to a stand still Time Full Retraction Balance Pressure Hydraulic Pressure Zero Pressure FUNCTIONAL DESCRIPTION Operation (Not Braking) Electrical power is connected to the electrical motor and the solenoid valve(s) is/are energized. The braking valve(s) is/are closed and block the connection to tank. The hydraulic pressure is built up and disengages the brake and charges the accumulator. The electrical power is disconnected from the motor by means of the motor pressure switch. The braking valve(s) is/are constantly energized. If the pressure is decreasing to the lower set point for motor pressure switch the motor will restart and increase the pressure again. Applying the Brake with Controlled Braking Torque The electrical power is disconnected to the braking valve(s) and motor. The hydraulic oil pressure is released to the tank through the counter pressure valve(s) and the throttle valve(s), resulting in a constant reduced braking torque (MT%). The reduced braking time is set by the flow control valve by bleeding the oil from the accumulator slowly through the flow control valve, maintaining a constant pressure in the brakes. When the accumulator is fully discharged the pressure in the brake will go to zero, and full braking torque is applied. The constant brake torque and braking time is pre-set from factory as specified or if not specified set to 50% (MT%) of maximum torque and approximately 10sec stopping time (Δt). Operation in Case of Power Failure In case of power failure the brakes will be applied as described in the section: Applying the brake with controlled braking torque. 1 www.svendborg-brakes.com P-7902-SV 1/18

www.svendborg-brakes.com FEATURES The hydraulic power unit is available in two versions; a basic (single dump) and a premium (dual dump) with cabinet / enclosure with various options and accessories. The junction box / terminal box is mounted internally in the upper left hand side. Cable entry is in left hand side with removable entry plate in brass. The cabinet door is hinged either left hand or right hand side. The pressure connection / bulkhead (JIC as standard / Ermeto fitting 10L as optional) is mounted in left hand side but can be mounted in the right hand side or in the bottom as well. 2-Stage Braking Special Features Single return line / dump (Basic) or Dual return lines / dump for redundancy (Premium) Counter pressure valve(s) and throttle valve(s) Equipped with hand pump for manual release of brake Inline high pressure filter LED s on solenoids Test point for readout / bleeding of manifold Pressure switch either electronic or mechanical type Level & temperature switch in tank Pressure gauge mounted on test point (minimess) hose inside cabinet Stainless steel enclosure mounted on bracket with vibration dampers Enclosure door with cam lock with double bit as standard or upgraded with stainless pad-lockable swing handle (optional) Removable drip tray to capture spills HPU can be mounted on slides for easy maintenance (optional) Sun roof / dirt cover 30 (optional) P-7902-SV 1/18 Svendborg Brakes 2

Svendborg Brakes Hydraulic Power Unit 2-Stage Braking HYDRAULIC DIAGRAM The schematics illustrates the difference between basic (single return) & premium (double return). The additional circuit on the premium version is marked with red in the below image. The motor pressure switch can either be mechanical type (2 switches) or electronic type (IFM) (1 switch) here shown as electronic type. Basic Version: Single Dump / Single Return Line Brake connection point Pressure gauge (optional) Test point nipple Braking valve Hand pump w/safety relief valve Counter pressure valve Adjustable throttle valve Motor pressure switch Flow control valve Accumulator Filling cap & breather (10 micron) Level & temperature switch (optional) EM P Check valve In-line filter (10 micron) Safety relief valve Electric motor Gear pump Level glass Premium Version: Double Dump / Dual Return Line Red area indicates additional circuit for redundant return/dump Brake connection point Pressure gauge (optional) Test point nipple Braking valve 1 Braking valve 2 Hand pump w/safety relief valve Motor pressure switch Flow control valve Accumulator Counter pressure valve 1 Counter pressure valve 2 Adjustable throttle valve 2 Adjustable throttle valve 1 Check valve In-line filter (10 micron) Safety relief valve Fillling cap & breather (10 micron) Level & temperature switch (optional) EM P Electric motor Gear pump Level glass 3 www.svendborg-brakes.com P-7902-SV 1/18

U V W 1 V 1T 2L 3C 1 2 3 4 www.svendborg-brakes.com ELECTRICAL DIAGRAM / SCHEMATIC The electrical components on the hydraulic power unit excluding the motor - are prewired to the junction box. The motor supply wire and motor starter is not part of the unit and must be provided locally. The connection from installation to junction box and motor is to be made through the removable brass entry plate in the left hand side and must be made during installation. It is not normal to connect the brake indicators though the junction box on the unit. The electrical diagram / schematic vary according to the selections made (basic / premium / mechanical or electronic pressure switch) below two typical schematics Premium Version (Redundant Valves) with IFM Pressure Switch: $TAG140020 $TAG140050 PROTECTED EARTH BRACKET 3X400V 50HZ 0,75KW - TEFC 3X480V 60HZ 0,90KW - TEFC U W =JU +PU 24VDC/ 250VAC 18-36VDC 24VDC 24VDC 5c:T 5c:L 5c:C 1T 2L 3C 40:C 40:NC 40:NO 42:C 42:NC 42:NO P1:+ P1:OUT2 P1:OUT1 P1:- 1L + BN 2 OUT2 WH 4 OUT1 BK 3L - BU 21:A1 21:A2 22:A1 22:A2 PU JUNCTION BOX CUSTOMER DOOR Premium Version (Redundant Valves) with Mechanical Pressure Switch: PROTECTED EARTH 3X400V 50HZ 0,75KW - TEFC 3X480V 60HZ 0,90KW - TEFC 24VDC/ 250VAC 18-36VDC 24VDC =JU +PU 5c:T 5c:L 5c:C 40:C 40:NC 40:NO 42:C 42:NC 42:NO P1:+ P1:OUT2 P1:OUT1 P1:- 21:A1 21:A2 22:A1 22:A2 JUNCTION BOX 1 2 3 4 =PU 1L + BN 2 OUT2 WH 4 OUT1 BK 3L - BU BRACKET PU DOOR P-7902-SV 1/18 Svendborg Brakes 4

Svendborg Brakes Hydraulic Power Unit 2-Stage Braking Component List (Quantities depend on configuration) Valves / Coil Pressure switch Level & temperature switch Motor Terminals (in JB) Wire colors Directional poppet valve 2/2 & coil 21W (1x or 2x) - Hydac Electronic sensor (1x) IFM 7001 Mechanical pressure switch (2x) - Bosch Rexroth HED5 Level indicator with temperature switch 70 C - Lund & Sorensen IEC common motor 0,75kW for 50Hz / 0,90kW for 60Hz Screw terminals - Wago IEC Power circuit wiring colors Protective earth () Green-yellow Neutral (N) Blue Line, single phase (L) Brown Line, 3 phase (L1) Brown Line, 3 phase (L2) Black Line, 3 phase (L3) Grey Recommended Brake Limits for 2 Stage Pressures Choosing brake torques and brake sizes that result in a hydraulic two stage pressure lower than 10bar (lower limit) is not recommended as the counter pressure valve is very difficult to set at this low pressure. The brake pressure curves indicate the two stage pressure at the corresponding torque. If pressure is below the lower limit the combination is not recommended. BSFI 200 Series: BSFI 300 Series: BSFI 3000 Series: 5 www.svendborg-brakes.com P-7902-SV 1/18

www.svendborg-brakes.com SELECTION SHEET 2 STAGE HYDRAULIC POWER UNIT Dimensions (600x800x400mm) (WxHxD) 684 600 472 Technical Specifications Motor standard IEC TEFC (fan cooled) IEC TENV (non ventilated) Junction Box Handle for Handpump Drip Tray HPU Selection Sheet Version (select one) Premium (dual return) Basic (single return) Motor (AC 50 Hz/60Hz) TEFC =Fan cooled TENC = Non Ventilated 1x230V 50 Hz / 1x230V 60 Hz 3x400V 50 Hz / 3x480V 60 Hz 3x500V 50 Hz / 3x575V 60 Hz 3x690V 50 Hz / 6x690V 60 Hz 740 (Wall) 656 Ø13 (Select one) TENV TEFC 932 82 52 351 370 (Floor) Accesories (select one) Unit mounted on slides (default) Unit fixed on bracket Door mounting (select one) Left side mounted (default) Right side mounted Cabinet accesories Cam lock with double bit (default) Pad-Lockable swing handle 251 Cable Entry Pressure Connection Available motor voltages AC 50Hz / 60 Hz 1 x 230V 3 x 400V / 480V 3 x 500V / 575V 3 x 690V / 690V All AC motors have voltage tolerance ± 10% Power consumption: 0.75kW (50Hz) 0.90KW (60Hz) Available Coil Voltages DC: 12V, 24V, 48V, 110V AC: 110V, 230V Power consumption: 19W (one coil) Oil Tank Size 6 liter / 1.58 gallon (US) / 1.32 gallon (imperial) Hand Pump Inclusive Pressure Switch Electronic or Mechanical Cabinet / Enclosure Stainless steel (1.4305 / AISI 304) incl. junction box Coil voltage (select one) AC DC Flat cabinet (no sun roof)(default) 12 VDC 24 VDC 48 VAC / VDC 110 VAC 230 VAC Dust cover / sun roof 30 Pressure connection entry (select one) Left side mounted (default) Right side mounted Bottom (left) mounted Pressure switch (select one) Pressure connection type (select one) Electrical (IFM) (Port P1) JIC connection (default) Mechanical (Port 40 & 42) Ermeto connection (10L) Hydraulic / brake parameters: Brake series / size: Type of brake (Mono / Dual) Number of brakes: pcs Braking torque M T % (30-70%):(% of 100% torque) % Braking time t (5-25sec): (2-stage time) Sec Standard (if no values given): M T % =50% & t =10 sec Customer Name / Project: Other Information: Name & Date: Protection class IP66 Protection class for electrical components IP55 Internal wiring according to IEC EN 60204-1 Mounted on suspension bracket with dampers and lifting point. Drip tray to take spills. Slides for easy maintenance (optional). Ambient Temperature Limits -20 C to +50 C / -4 F to +122 F The hydraulic fluid must match temperature level Altitude Below 1000 MASL Weight Approx.: 100kg / 220lb (without oil) P-7902-SV 1/18 Svendborg Brakes 6

Svendborg Brakes Facilities Europe Jernbanevej 9 DK-5882 Vejstrup - Denmark +45 63 255 255 sb@svendborg-brakes.com Industrial Brakes and Brake Systems Global Representations Australia Svendborg Brakes Australia Pty., Ltd. Perth +61 (0) 8 94 160300 Svendborg Brakes Australia Pty., Ltd. Newcastle +61 (0) 8 94 160300 Svendborg Brakes Australia Pty., Ltd. Brisbane +61 (0) 8 94 160300 Brazil Altra Industrial Motion Brazil +55 11 4615-6300 / +55 11 5679-6553 China Svendborg Brakes Shanghai Co., Ltd. +86 21 50311060 Czech Republic Svendborg Brakes Czech Republic +420 (251) 6801 68 Denmark Svendborg Brakes ApS +45 63 255 255 Germany Svendborg Brakes ApS +49 5422 9272 00 India Svendborg Brakes India sb@svendborg-brakes.com South Africa Altra Industrial Motion South Africa +27 (0) 11 918-4270 Spain Svendborg Brakes +34 (975) 2336 55 USA Svendborg Brakes, USA LLC +1 (303) 285 1271 Chile Svendborg Brakes Chile Coquimbo +56 23 203 9150 Svendborg Brakes Chile Santiago +56 23 203 9150 Korea Svendborg Brakes, Korea Co., Ltd. +82 10 9703 0979 Poland Svendborg Brakes Poland +48 (322) 1150 40 The Brands of Altra Industrial Motion Couplings Ameridrives www.ameridrives.com Bibby Turboflex www.bibbyturbofl ex.com Guardian Couplings www.guardiancouplings.com Huco www.huco.com Lamiflex Couplings www.lamifl excouplings.com Stromag www.stromag.com TB Wood s www.tbwoods.com Geared Cam Limit Switches Stromag www.stromag.com Electric Clutches & Brakes Inertia Dynamics www.idicb.com Matrix www.matrix-international.com Stromag www.stromag.com Warner Electric www.warnerelectric.com Linear Products Warner Linear www.warnerlinear.com Engineered Bearing Assemblies Kilian www.kilianbearings.com Heavy Duty Clutches & Brakes Industrial Clutch www.indclutch.com Twiflex www.twifl ex.com Stromag www.stromag.com Svendborg Brakes www.svendborg-brakes.com Wichita Clutch www.wichitaclutch.com Belted Drives TB Wood s www.tbwoods.com Gearing Bauer Gear Motor www.bauergears.com Boston Gear www.bostongear.com Delroyd Worm Gear www.delroyd.com Nuttall Gear www.nuttallgear.com Overrunning Clutches Formsprag Clutch www.formsprag.com Marland Clutch www.marland.com Stieber Clutch www.stieberclutch.com Neither the accuracy nor completeness of the information contained in this publication is guaranteed by the company and may be subject to change in its sole discretion. The operating and performance characteristics of these products may vary depending on the application, installation, operating conditions and environmental factors. The company s terms and conditions of sale can be viewed at http://www.altramotion.com/terms-and-conditions/sales-terms-and-conditions. These terms and conditions apply to any person who may buy, acquire or use a product referred to herein, including any person who buys from a licensed distributor of these branded products. 2017 by Svendborg Brakes LLC. All rights reserved. All trademarks in this publication are the sole and exclusive property of Svendborg Brakes LLC or one of its affi liated companies. www.svendborg-brakes.com P-7902-SV 1/18

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback