WE ARE EXPERTS IN RUBBER TRANSFLEX EXPANSION JOINTS FOR BRIDGES Trelleborg have over a hundred years' experience in the manufacture of rubber products. We make major investments in R+D. Our sales representatives, chemists and engineers are striving to find better solutions for our customers through the ongoing development of new compounds, materials, designs and production methods. The Trelleborg Group has more than 22.000 employees and is established in over 40 countries. A comprehensive programme for construction : Structural Bearings, Deck Joints for Bridges (Transflex ), Piping Compensators (Teguflex ), Special Hoses, Rubber-Metal Mouldings. ENGINEERED SYSTEMS Trelleborg IESA, s.a. C/ San Vicente, 25 E 01440 Izarra (Álava) - Spain Tel.: + 34 945 437 090 Fax: + 34 945 437 0 iesa@trelleborg.com www.trelleborg.com/iesa Trelleborg IESA, s.a. División Expandite: C/ Río Manzanares, 20-22 P. Ind. José Luis Velasco E 280 Arganda del Rey (Madrid) - Spain Tel.: +34 918 701 700 Fax: +34 918 703 465 expandite@trelleborg.com ENGINEERED SYSTEMS
ENG 2006 09 In 1964 the American rubber manufacturer General Tire developed a system of expansion joints for bridges called TRANSFLEX. It registered the patent of invention and the trademark worldwide. In 1971 the Expandite Division carried out the first installation in Spain with TRANSFLEX material (Bailen- Ferraz flyover in Madrid). In 1997 the Trelleborg Group integrated the Expandite Division into its organisation. At the present time Trelleborg IESA, a company within the TRELLEBORG Group, has the rights of ownership trademark, manufacture and distribution, which are carried out through its Expandite Division. Brief description product The TRANSFLEX system consists of rubber moulded s reinforced with steel. TRANSFLEX is supplied in s of a specified length and are anchored to both sides structural joint.. There is a wide range of s that absorb movements up to 330 mm in length, including those produced by skew joints. Their main functions are to absorb these movements, ensure quiet traffic and provide effective sealing joint on the road surface. Characteristics The joint absorbs movements up to 330 mm in length Modules are rubber coated to protect the reinforcements They ensure comfortable travel over the joint Extraordinary durability. Possibility of absorbing skew movements. Easy, fast assembly when replacing old joints The impact loads are fully absorbed by the system. Our installations at Izarra, where the TRANSFLEX joint is manufactured. Agglomerate TRANSFLEX 1-300 expansion joint (Manufactured under ISO-9002, Certificate No. 57596) 2t b M Self-locking nut Drainage Concrete Deck Resin C No. of anchors (max. opening at average temp.) D Model Model W t Waterproofing TRANSFLEX 400-1300 expansion joint (Manufactured under ISO-9002, Certificate No. 57596) L W t c b M D( trans) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (uds) Transflex 400 102 590 54 152 170 M16 Transflex 6 Transflex 900 Transflex 1300 165 230 330 L 20 W t c b M D(trans) n (mm) (mm) (mm) (mm) (mm) (mm) (mm) (uns) Transflex 1 38 17 240 35 39 1 M Transflex 200 Transflex 200 Transflex 300 65 80 Self-locking nut 2t Agglomerate Drainage Concrete Deck No. of anchors bm 274 356 432 724 890 07 40 46 54 W 75 93 7 51 67 88 203 273 381 1 1 170 Resin c (max. opening at average temp.) D t 200 220 270 M14 M14 M16 M20 M24 M27 190 498 Epoxy adhesive Mortar bed TR-M-1 Transition mortar TR-MR-300 220 279 342 Waterproofing n 618 787 1080 14 Epoxy adhesive Mortar bed TR-M-1 Transition mortar TR-MR-300 8
1.- Composition Models 1, 200, 2 and 300 Models 1, 200, 2 and 300 Models 400, 6, 900 and 1300 CL C Anchor housing Elastomer Steel plate Steel angle Anchor housing Elastomer Steel plate Steel angle Draining relief 2.- Detail of installed joint Tongued and grooved Models 400, 6, 900 and 1300 Self-locking nut Epoxy adhesive Mortar bed TR-M-1 Transition mortar TR-MR-300 CL C Agglomerate Drainage Deck Concrete Resin Waterproofing NOTE: Model 1300 has four (8) anchors per Tongued and grooved Draining relief Models of movement Height Width Weight Diameter bolt bolt Max. height bolt on the floor Tightening torque Max. width joint at average temp. Max. width joint Anchor transition width Distance between anchors (transv.) C Distance between anchors (longit.) CL 1 200 2 300 400 6 900 1300 38 mm (+-19) mm (+-25) 65 mm (+-33) 80 mm (+-40) 102 mm (+-51) 165 mm(+-83) 230 mm (+-115) 330 mm (+-165) 17 mm 20 mm 35 mm 40 mm 46 mm 54 mm 54 mm 75 mm 93 mm 7 mm 240 mm 274 mm 356 mm 432 mm 590 mm 724 mm 890 mm 07 mm 28 Kg 45 Kg 62 Kg 88 Kg 1 Kg 260 Kg 375 Kg 438 Kg mm 14 mm 14 mm 16 mm 16 mm 20 mm 24 mm 27 mm 170 mm 170 mm 200 mm 220 mm 270 mm 27 mm 32 mm 40 mm 42 mm 42 mm 51 mm 60 mm 70 mm 45 Nm 100 Nm 100 Nm 175 Nm 175 Nm 190 Nm 275 Nm 300 Nm 39 mm 51 mm 67 mm 88 mm 102 mm 1 mm 158 mm 216 mm 58 mm 76 mm 98 mm 6 mm 152 mm 203 mm 273 mm 381 mm 70 mm 80 mm 92 mm 108 mm 108 mm 180 mm 260 mm 190 mm 220 mm 279 mm 342 mm 498 mm 618 mm 787 mm 1080 mm 2 mm
Special parts. The formation of special parts for kerbs, pavements or other reliefs is offered for all the Transflex models to ensure continuity sealing. Examples: Transflex, s 1, 200, 2 and 300 Skew case Transflex, s 400, 6, 900 and 1300 Change in level of pavements To order the manufacture se parts it is essential to specify all the dimensions.
Load/deformation curves for Transflex, per Graph of maximum movements absorbed by the different s according to the angle formed by the joint with the longitudinal axis floor. 3 T TRANSFLEX 1300 TRANSFLEX 900 TRANSFLEX 6 MODEL 1300 mm 0 90 10 80 20 70 30 60 400 3 2 T 1 T 2 T COMPRESSION 160 TRANSFLEX 400 140 0 100 80 60 40 20 0 20 40 60 80 100 0 140 TRANSFLEX 300 TRANSFLEX 2 TRANSFLEX 200 TRANSFLEX 1 EXTENSION 160 MODEL 900 MODEL 6 MODEL 400 40 40 60 30 70 20 300 2 200 1 100 COMPONENT PERPENDICULAR TO THE JOINT 1 T COMPRESSION EXTENSION 40 30 20 10 0 10 20 30 40 MODEL 300 MODEL 2 MODEL 200 MODEL 1 80 10 0 90 100 200 300 0 mm COMPONENT PARALLEL WITH THE JOINT 0
Guide to adjustment according to temperature. Example based on Transflex 200 TECHNICAL DATA ELASTOMER Value Units Test method Indentation hardness 60±5 Shore A ASTM D2240 Rupture load >1 Kgs/cm² ASTM D4/NFT46002 Maximum temperature specified Elongation at rupture >425 % ASTM D4/NFT46002 Rubber-steel adhesion >11,8 N / mm ASTM D429 Method B Temperatura del tablero ºC Average temperature specified ( at rest) Minimum temperature specified Low temperature resistance -30 C ASTM D1329 Ozone resistance Without ASTMD1149 Method B cracks 25ppcm (48 hours at 38 C) Remanent deformation 35 % maxim. def. ASTM D395 Method B (24 hours at 70 C) Thermal aging 5 Shore A ASTM D573-15 % Inc. Load by hot air -25 % Inc. Elongation (70 hours at 70 C) 249 mm 274 mm 299 mm STEEL (Remanent irreversible movements are not included). Components manufactured to: ASTM Type A36 DIN 17-100 Type ST 37-2 NOTE: All reasonable care has been taken to provide the correct technical data on our products. All recommendations or suggestions regarding their use are made in good faith and are based on our experience. However, it is the responsibility user or designer to ensure that each product is suitable for the purpose for which it is intended and that the conditions of use are appropriate.