CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil Power consumption Connector Voltage Manual override -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () nitrile rubber aluminium AA series/u1-u,5 W (DC) - 5 VA (AC) AM 5110 12 V DC - 24 V DC - 24 V AC - 110 V AC - 20 V AC two-position screw NOTE: some versions with high temperature seals are available upon request (for further information please refer to our Sales Office) UNIVERSAL System modularity MECHANICAL MANUAL ELECTRICAL PNEUMATIC 1 2 4 8 9 10 11 12 18 22 19 5 6 7 1 14 15 16 17 20 21 Valves /2 5/2-5/ 2 24 20 21 25 26 27 28 29 0 17 19 18 MECHANICAL CONTROL 1 Ball push 2 Ball push for screw panel mounting Ball push with dust protection 4 Roller with dust protection 5 Roller lever 6 One-way roller lever 7 Two-way side roller lever MANUAL CONTROL 8 9 10 11 Push-pull Push buttom Rotating lever Selector 12 90 short/long lever 1 Short/long lever 14 Threaded indirect operation 15 Panel direct operation 16 Panel indirect operation ELECTRICAL CONTROL 17 Electrical amplified 18 U1 electropilot 19 Plate for external pilot supply 20 Angle plate for "H" solenoid option 21 Angle plate for "P" solenoid option PNEUMATIC CONTROL 22 Pneumatic amplified BODY 2 /2 Body 24 5/2 Body RETURN 25 Mechanical spring 26 Pneumatic not amplified 27 Bottom plate - 2/ positions 28 Bottom plate 29 Pneumatic spring 0 Pneumatic amplified 67
CL/CM UNIVERSAL Valves G1/8 - Valves G1/8 with direct mechanical operation Roller lever One-way roller lever CL-100A CM-400A CL-101A CM-401A CL-100P CM-400P CL-101P CM-401P NEW - Two-way side roller lever NEW - Adjustable two-way side roller lever CL-106A CM-406A CL-106AL CM-406AL Ball-push Roller with dust protection CL-102A CM-402A CL-105A CM-405A CL-102P CM-402P CL-105P CM-405P Ball push with dust protection Ball push for screw panel mounting CL-104A CM-404A CL-10A CM-40A CL-104P CM-404P CL-10P CM-40P Valves with direct mechanical operation Ball push Ball push for screw panel mounting CL-9102A CM-9402A CL-910A CM-940A CL-9102P CM-9402P CL-910P CM-940P 68
Valves CL/CM UNIVERSAL Valves G1/8 - Valves G1/8 - with indirect mechanical operation for pneumatic and mechanical operators Ball push Sensible ball push CL-110A CL-9110A CM-410A CM-9410A CL-111A CL-9111A CM-411A CM-9411A CL-110P CL-9110P CM-410P CM-9410P CL-111P CL-9111P CM-411P CM-9411P AI-550 AI-551 AI-560 AI-562 AI-56 AI-570 AI-571 AI-572 AI-511 AI-514 AI-515 AI-520 AI-522 AI-524 AI-525 AI-526 AI-512 AI-516 AI-517 AI-521 AI-52 AI-51 AI-514D AI-519 AI-516D Valves G1/8 - with direct and indirect operation for panel operators Ball push (direct operation) Ball push (indirect operation) CL-112A CM-412A CL-11A CL-911A CM-41A CM-941A CL-112P CM-412P CL-11P CL-911P CM-41P CM-941P AI-511Q AI-514Q AI-515Q AI-524Q AI-511Q AI-514Q AI-515Q AI-520Q AI-524Q AI-522Q AI-525Q AI-526Q AI-512Q AI-516Q AI-517Q AI-512Q AI-516Q AI-517Q AI-521Q AI-52Q AI-51Q AI-514QD AI-519Q AI-51Q AI-514QD AI-519Q AI-516QD AI-516QD 69
CL/CM UNIVERSAL Valves G1/8 - Valves G1/8 with manual operation Push-pull CL-120 CM-420 CL-120A CL-120P CM-420A CM-420P CP-911G CP-911R CP-911N GREEN CP-911V Long lever CL-118R CM-418R Short lever CL-119R CM-419R LONG LEVER UPON REQUEST CL-121R CM-421R CL-122R CM-422R SHORT LEVER UPON REQUEST GREEN Button CL-126A CM-426A Rotating lever CL-10 CM-40 CM-40E CM-45E CM-440E CP-915R CP-916R 90 Lever - positions SHORT LEVER CL-12 CM-42 CP-912G CP-912R CP-912N CL-12D CL-12A CM-42D CM-42A LONG LEVER CP-91R CM-42E CM-42F CM-424E CM-424F CM-425E CM-425F 70
Valves CL/CM UNIVERSAL Valves G1/8 - Valves with manual operation Push-pull CL-9120 CM-9420 CL-9120A CL-9120P CM-9420A CM-9420P CP-911G CP-911R CP-911N GREEN CP-911V Long lever CL-9118R CM-9418R UPON REQUEST CL-9121R CM-9421R Rotating lever CL-910 CM-940 CM-940E CM-9440E CP-915R CM-945E CP-916R 90 Lever - positions SHORT LEVER CL-912 CM-942 CP-912G CP-912R CP-912N CL-912D CL-912A CM-942D CM-942A LONG LEVER CP-91R CM-942E CM-942F CM-9424E CM-9424F CM-9425E CM-9425F 71
CL/CM UNIVERSAL Valves G1/8 - Valves G1/8 - with pneumatic operation Single impulse CL-200 G1/8 CL-9200 CL-20 G1/8 CL-920 CL-200A G1/8 CL-9200A CM-500 G1/8 CM-9500 CM-500A G1/8 CM-9500A Double impulse CL-220 G1/8 CL-9220 CL-221 G1/8 CL-9221 CL-224 G1/8 CL-9224 CM-521 G1/8 CM-9521 CM-524 G1/8 CM-9524 CM-520 G1/8 CM-9520 CM-580 G1/8 CM-9580 CM-585 G1/8 CM-9585 CM-590 G1/8 CM-9590 Valves G1/8 - with electrical operation Single impulse CL-00 G1/8 CL-900 CL-02A G1/8 CL-902A CL-01 G1/8 CL-901 CL-0A G1/8 CL-90A CM-600 G1/8 CM-9600 CM-602A G1/8 CM-9602A Double impulse CL-20 G1/8 CL-920 CL-21 G1/8 CL-921 CL-22 G1/8 CL-922 CM-620 G1/8 CM-9620 CM-621 G1/8 CM-9621 CM-622 G1/8 CM-9622 CM-680 G1/8 CM-9680 CM-685 G1/8 CM-9685 CM-690 G1/8 CM-9690 Solenoid valves are supplied without coil / connector / locking nut 72
Valves CL/CM UNIVERSAL Valves G1/8 - AM-5148 AM-5151 AM-5152 Plate for external pilot supply Angle plate for "H" solenoid option Angle plate for "P" solenoid option CLIPS Modular sub-base G1/8 - for /2-5/2-5/ valves G1/8 CP-100/CP-9100 CP-101/CP-9101 CP-105/CP-9105 CP-106 modular sub-base with adjustable and conveyed exhausts CP-100 for G1/8, CP-9100 for material: zamak modular sub-base without adjustable exhaust CP-101 for G1/8, CP-9101 for material: zamak side connections inlet plate connections: CP-105, CP-9105 G/8 material: zamak closing plate for unused place material: aluminium standard supplied: screws, seals, exhaust regulator and couplig for valve fixing standard supplied: screws, seals and copuling for valve fixing standard supplied: screws and seals CP-110/CP-9110 CP-111/CP-9111 CP-112/CP-9112 CP-11/CP-911 coupling connections: CP-110 G1/8, CP-9110 material: brass pressure separator CP-111 for G1/8, CP-9111 for material: aluminium plug for /2 valve mounting CP-112 for G1/8, CP-9112 for material: aluminium adjustment screw CP-11 for G1/8, CP-911 for material: brass For each additional pressure, one coupling and two separators are required Plug for mounting /2 NC-NO valves on CLIPS sub-base to close unused way. Sub-base with adjustment screw (screwdriver slot) standard supplied. Upon request: adjustment needle with milled handle Manifold assembly example by different pressures G1/8 A G/8 B G1/8 2 1 1 2 1 2 Pressure separator CP-111/CP-9111 Fixing coupling for valve embodied in the sub-base Coupling CP-110/CP-9110 7