TECHNICAL DATA AND INFORMATION 366 hp 145,505-147,7 bs up to 68.9 ft MHL380D SCRAP-HANDLING AND PORT MACHINE
TECHNICAL DATA MHL380 D OPERATING WEIGHT 145,505-147,7 bs DIESEL ENGINE MANUFACTURER AND MODEL Deutz TCD 2015 V06 4V DESIGN 6-cyinder V-engine ENGINE CONTROL EMR III TYPE 4-stroke diese, direct common rai fue injection, turbocharged with intercooing ENGINE OUTPUT 366 hp NOMINAL SPEED 1800 rpm DISPLACEMENT 726.8 in 3 COOLING SYSTEM Liquid intercooing with temperature-controed fan speed EMISSION STANDARDS EPA Tier III and COM III AIR FILTER DESIGN Two-stage fiter FUEL TANK CAPACITY 230 US ga ELECTRICAL SYSTEMS OPERATING VOLTAGE BATTERIES LIGHTING SET GENERATOR 24 V 2 x 12 V / 143 Ah / 950 A (in accordance with EN) 1 x H3 spotight on upper carriage, 1 x H3 spotight on cabin foor, turn signa and rear side-marker amps 30 kw DC generator with contro, driven by V-bet direct from diese engine TRAVEL DRIVE TRAVEL SPEED, 1st GEAR GRADEABILITY max. 11% TURNING RADIUS Hydrostatic drive through infinitey variabe axia piston motor and directy mounted trave brake vaves, fanged to a singe-stage transfer gear-box, 4-whee drive Continuousy variabe 0-5 mph 32.5 ft SWING SYSTEM RING GEAR DRIVE UPPER CARRIAGE SWING SPEED PIVOT BRAKE Internay toothed ba ring gear (doube row) Two-stage panetary gear with integrated muti-disc brake, cosed circuit Infinitey variabe from 0-6 rpm Eectricay operated UNDERCARRIAGE FRONT AXLE Panetary drive axe with integrated drum brake, rigidy mounted, max. steering ange: 30 REAR AXLE STABILIZERS Osciating panetary drive rear axe with integrated drum brake and seectabe osciating axe ock 4-point stabiizers TIRES Soid rubber, eastic, 8-fod 14.00-24 BRAKE SYSTEM SERVICE BRAKE PARKING BRAKE Hydrauic singe-circuit braking system acting on a four whee pairs Eectricay operated disc brake at transmission, acting on both front and rear axes 02
HYDRAULIC SYSTEM MAX. PUMP CAPACITY MAX. OPERATING PRESSURE HYDRAULIC OIL TANK OPERATOR S CAB HEATING OPERATOR S SEAT MONITORING AIR CONDITIONING SOUND POWER LEVEL REXROTH mobie hydrauic system with oad imit contro and fue-saving power-demand contro, cosed swing circuit. Separate oi cooer, temperature-controed fan speed. Hydrauic oi fiter: fiter eements integrated in the oi tank; maintenance interva: up to 3,000 operating hours. Centra ubrication system 169.1 US ga/min + 52.8 US ga/min in swing circuit 4,641 / 5,221 psi 182 US ga Cab: Easticay supported, infinitey variabe hydrauicay height-adjustabe with max. eye eve of 20.3 ft and independenty horizontay adjustabe by up to 7.2 ft. Large windows for optimum a-around view, windshied with pu-down sunbind that sides under cab roof, visibiity pane in cab roof, siding window in cab door, steering coumn height and tit adjustabe Infinitey variabe hot water heating with 3-speed fan, 4 adjustabe defroster nozzes Air-cushioned comfort-seat with integrated headrest, safety bet and umbar support, seat heating with integrated a/c function optiona. Seat position, seat incination and position of seat reative to armrests and piot contro units are muti-adjustabe, aowing ow fatigue operation Ergonomic, anti-gare instrument ayout; function monitor; automatic monitoring, warning, and storage of deviating operating conditions, e.g. fiter pressure monitoring with warning indicator and shutdown of piot contros; warning and shutdown of piot contros if hydrauic oi temperature imits are exceeded Automatic (guaranteed) in accordance with guideine 2000/14 EC L W(A) = 6 db (A) SAFETY INSTALLATIONS For crane operations in accordance with EN 474-5 Cab protection by cose proximity range imiter OFFICIAL HOMOLOGATION Certification in accordance with CE reguations 03
EQUIPMENT MHL380 D ENGINE SERIES OPTION Exhaust gas turbocharger Charge air cooing Eectronic direct injection Automatic ide Engine diagnosis interface Temperature-controed fan drive UPPERCARRIAGE SERIES OPTION Eectric refueing pump Lighting protection Maintenance hood, actuated by gas strut, with mechanica ocking device Lockabe ceaning access openings on radiators Separate radiator system for ambient temperatures up to 122 F (50 C) Separate oi cooer with temperaturecontroed fan drive Automatic centra ubrication system Specia paint Quick-drain vave for fue tank (suppied in too box) Quick-drain vave on hydrauic oi tank Quick-drain vave on radiator Quick-drain vave on engine oi-pan SERIES 4-point stabiizers OPTION 4-point stabiizers, individuay controabe Stabiizer cyinders with integrated two-way check vaves A-whee drive Piston rod protection on stabiizer cyinders Stabiizer pates 26.2 x 20.1 in Extra-arge stabiizer pates 42.1 x 31.5 in Rear axe osciating ock Specia paint Drum brakes Too box CAB SERIES OPTION Lift-up skyight in cab roof Air cushioned operator s seat with headrest, safety bet and umbar support FOPS protective grating (roof) Front/roof protective grating Hinged front windshied LEXAN front window gass High strength gass, front and top Cab system horizontay and verticay adjustabe Air conditioning Steering coumn, height and tit adjustabe Muti-function coor dispay Lower windscreen wiper Fire extinguisher, dry powder Radio / CD payer Rotating beacon Siding window in cab door Safety gass Seat heating with integrated a/c function Windscreen washer system SERIES Foodights attached to cab foor Foodights, mounted to superstructure OPTION Foodight, mounted Cose proximity range imiter for stick Cooant and hydrauic oi eve monitoring system Hose rupture protection for ift cyinder Hose rupture protection for stick cyinder Stick shock protection Lubrication of the grab suspension by centra ubrication system Overoad protection / shutdown XENON foodight on stick XENON foodight on superstructure XENON foodight on cab roof Ba-vave couping Fiter system for attachments 04
DIMENSIONS MHL380 D MHL380 D Transport dimensions with stick 141.7 234.3 260.4 149.4 Dimensions (in) 56.5 66.1 124.4 120.1 80.9 140.2 204.3 224.4 128.7 152.6 with protective grating for cab roof E D A B C MHL380 D Transport dimensions with cranked boom E D A B C DIMENSIONS REACH 60.7 ft REACH 68.9 ft REACH 68.9 ft (CRANKED) A 595.3 in 664.0 in 656.3 in B 250.6 in 284.4 in 259.1 in C 78.5 in 78.5 in 78.5 in D 143.9 in / *152.6 in 143.9 in / *152.6 in 143.9 in / *152.6 in E 128.7 in 141.7 in 145.7 in * with protective grating for cab roof 05
WORKING RANGES/LIFTING CAPACITIES MHL380 D 60 50 Reach 60.7 ft with stick Work equipment: Box-type boom 31.5 ft; Stick 26.2 ft; Cactus grab 40 30 20 0 - -20-30 Center of rotation 70 60 50 40 30 20 0 3Reach in ft 06
HEIGHT ft 60 55 50 45 40 35 30 25 20 15 5 0-5 - -15 UNDERCARRIAGE STABILIZERS 20 25 30 35 REACH ft 40 45 50 55 60 non supported (20,640*) 4-pt. supported 20,640* (20,640*) non supported (22,220*) 4-pt. supported 22,220* (22,220*) non supported (26,000) (20,640) 4-pt. supported 26,820* (26,820*) 22,200* (22,200*) non supported (26,170*) (20,990) (16,970) 4-pt. supported 26,170* (26,170*) 24,570* (24,570*) 21,2* (21,2*) non supported (26,090*) (21,060) (17,120) (14,040) 4-pt. supported 26,090* (26,090*) 24,430* (24,430*) 23,0* (23,0*) 18,960* (18,960*) non supported (26,120) (20,9) (17,060) (14,080) (11,650) 4-pt. supported 26,560* (26,560*) 24,700* (24,700*) 23,1* (23,1*) 21,530* (21,530*) 14,4* (14,4*) non supported (25,620) (20,560) (16,830) (13,970) (11,670) 4-pt. supported 27,530* (27,530*) 25,340* (25,340*) 23,490* (23,490*) 21,4 (21,890*) 18,180 (19,250*) non supported (31,850) (24,880) (20,040) (16,480) (13,740) (11,560) 4-pt. supported 32,3* (32,3*) 28,960* (28,960*) 26,280* (26,280*) 24,080* (24,080*) 21,170 (22,2*) 18,070 (20,540*) non supported (40,5) (30,420) (23,9) (19,360) (16,0) (13,430) (11,380) (9,690) 4-pt. supported 41,140* (41,140*) 35,080* (35,080*) 30,720* (30,720*) 27,4* (27,4*) 24,630* (24,630*) 20,840 (22,620*) 17,870 (20,7*) 14,460* (14,460*) non supported (53,150) (37,730) (28,7) (22,780) (18,600) (15,480) (13,070) (11,150) (9,580) 4-pt. supported 59,970* (59,970*) 46,330* (46,330*) 38,120* (38,120*) 32,6* (32,6*) 28,600* (28,600*) 24,060 (25,520*) 20,460 (23,020*) 17,630 (20,850*) 15,350 (16,830*) non supported (47,690) (34,800) (26,920) (21,620) (17,8) (14,940) (12,700) (,9) (9,450) 4-pt. supported 68,970* (68,970*) 51,130* (51,130*) 40,940* (40,940*) 34,070* (34,070*) 27,950 (29,680*) 23,480 (26,160*) 20,060 (23,330*) 17,380 (20,740*) 15,2 (18,120*) non supported (32,1*) (32,300) (25,320) (20,550) (17,070) (14,420) (12,350) (,680) (9,340) 4-pt. supported 32,1* (32,1*) 54,090* (54,090*) 41,150 (42,980*) 32,890 (35,620*) 27,150 (30,450*) 22,920 (26,560*) 19,690 (23,430*) 17,140 (20,490*) 15,090 (17,890*) non supported (25,040*) (30,570) (24,090) (19,670) (16,450) (13,980) (12,050) (,500) (9,260) 4-pt. supported 25,040* (25,040*) 52,080 (54,3*) 39,760 (43,8*) 31,930 (36,170*) 26,470 (30,7*) 22,450 (26,570*) 19,370 (23,200*) 16,940 (20,200*) 15,0 (16,630*) non supported (24,830*) (29,570) (23,270) (19,040) (15,980) (13,650) (11,830) (,380) 4-pt. supported 24,830* (24,830*) 43,720* (43,720*) 38,840 (43,240*) 31,230 (35,780*) 25,970 (30,300*) 22,0 (26,040*) 19,130 (22,480*) 16,8 (19,160*) non supported (26,5*) (29,150) (22,840) (18,670) (15,690) (13,450) (11,7) (,360) 4-pt. supported 26,5* (26,5*) 41,360* (41,360*) 38,350 (41,200*) 30,830 (34,320*) 25,660 (29,050*) 21,880 (24,790*) 19,0 (21,080*) 16,790 (17,330*) non supported (29,140) (22,720) (18,540) (15,590) (13,400) (11,730) 4-pt. supported 42,020* (42,020*) 37,640* (37,640*) 30,680 (31,630*) 25,550 (26,760*) 21,820 (22,600*) 18,690* (18,690*) RECOMMENDED ATTACHMENTS LIFT HOOK CACTUS GRAB 1.0 yd 3 CACTUS GRAB 1.3 yd 3 CACTUS GRAB 1.6 yd 3 CACTUS GRAB 1.8 yd 3 CLAMSHELL GRAB 1.8 yd 3 CLAMSHELL GRAB 2.1 yd 3 CLAMSHELL GRAB 2.1 yd 3 44,092 bs Open or haf-cosed tines Open or haf-cosed tines Open or haf-cosed tines Open or haf-cosed tines up to 5,225 b/yd 3 up to 4,382 b/yd 3 up to 3,203 b/yd 3 Capacity vaues are stated in (bs). The pump pressure is 5,221 psi. The vaues, in accordance with ISO 567, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through 360 on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, couper, ift hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture protection vaves on the ift cyinders and an overoad warning device are required for crane operations. 07
WORKING RANGES/LIFTING CAPACITIES MHL380 D 70 60 Reach 68.9 ft with stick Work equipment: Box-type boom 37.2 ft; Stick 29.3 ft; Cactus grab 50 40 30 20 0 - -20-30 Center of rotation 70 60 50 40 30 20 0 3Reach in ft 08
HEIGHT ft 65 60 55 50 45 40 35 30 25 20 15 5 0-5 - -15-20 UNDERCARRIAGE STABILIZERS 20 25 30 35 40 REACH ft 45 50 55 60 65 70 non supported (22,640*) 4-pt. supported 22,640* (22,640*) non supported (24,940*) (20,770*) (16,550*) 4-pt. supported 24,940* (24,940*) 22,880* (22,880*) 17,650* (17,650*) non supported (21,280*) (17,130) (13,830) 4-pt. supported 22,220* (22,220*) 20,660* (20,660*) 17,350* (17,350*) non supported (21,500*) (17,780) (14,160) (11,520) 4-pt. supported 21,9* (21,9*) 20,350* (20,350*) 19,050* (19,050*) 15,800* (15,800*) non supported (21,500*) (17,420) (14,260) (11,720) 4-pt. supported 21,9* (21,9*) 20,300* (20,300*) 18,940* (18,940*) 17,760* (17,760*) non supported (21,290*) (17,270) (14,190) (11,740) (9,700) 4-pt. supported 22,190* (22,190*) 20,470* (20,470*) 19,0* (19,0*) 17,750* (17,750*) 15,540* (16,620*) non supported (25,040*) (20,870) (16,970) (13,980) (11,620) (9,680) (8,0) 4-pt. supported 25,040* (25,040*) 22,730* (22,730*) 20,840* (20,840*) 19,240* (19,240*) 17,860* (17,860*) 15,520* (16,630*) 12,580* (12,580*) non supported (25,340*) (20,250) (16,5) (13,660) (11,400) (9,560) (8,000) 4-pt. supported 26,160* (26,160*) 23,5* (23,5*) 21,370* (21,370*) 19,580* (19,580*) 17,960* (18,060*) 15,390 (16,720*) 13,240 (15,440*) non supported (31,120*) (24,230) (19,440) (15,920) (13,230) (11,0) (9,360) (7,9) 4-pt. supported 31,670* (31,670*) 27,580* (27,580*) 24,470* (24,470*) 22,0* (22,0*) 20,0* (20,0*) 17,640* (18,320*) 15,180 (16,840*) 13,140 (15,460*) non supported (53,120*) (38,770) (29,130) (22,870) (18,480) (15,230) (12,730) (,740) (9,120) (7,760) 4-pt. supported 53,120* (53,120*) 41,440* (41,440*) 34,170* (34,170*) 29,180* (29,180*) 25,520* (25,520*) 22,7* (22,7*) 20,170* (20,170*) 17,270 (18,600*) 14,920 (16,970*) 12,990 (15,470*) non supported (48,700*) (35,090) (26,870) (21,380) (17,440) (14,490) (12,190) (,350) (8,840) (7,580) 4-pt. supported 61,290* (61,290*) 45,740* (45,740*) 36,700* (36,700*) 30,770* (30,770*) 26,560* (26,560*) 23,090* (23,090*) 19,600* (20,890*) 16,860 (18,840*) 14,640 (17,070*) 12,800 (15,430*) non supported (23,880*) (31,470) (24,630) (19,890) (16,400) (13,750) (11,650) (9,960) (8,570) (7,400) (6,420) 4-pt. supported 23,880* (23,880*) 49,200* (49,200*) 38,830* (38,830*) 32,130* (32,130*) 26,530* (27,440*) 22,290* (23,950*) 19,020 (21,230*) 16,440 (19,000*) 14,340 (17,080*) 12,6 (15,280*) 11,170* (13,260*) non supported (14,400*) (28,620) (22,720) (18,550) (15,450) (13,050) (11,140) (9,590) (8,300) (7,230) 4-pt. supported 14,400* (14,400*) 35,8* (35,8*) 38,370* (40,120*) 30,820* (33,020*) 25,500 (28,020*) 21,540 (24,300*) 18,480 (21,390*) 16,050 (19,020*) 14,070 (16,960*) 12,440 (15,020*) non supported (13,690*) (26,400*) (21,300) (17,490) (14,660) (12,460) (,700) (9,270) (8,080) (7,090) 4-pt. supported 13,690* (13,690*) 26,400* (26,400*) 36,770 (40,330*) 29,640 (33,260*) 24,630 (28,170*) 20,900 (24,340*) 18,0 (21,320*) 15,7 (18,820*) 13,830 (16,630*) 12,290 (14,520*) non supported (15,060*) (24,390*) (20,370) (16,720) (14,050) (11,990) (,350) (9,0) (7,9) (7,000) 4-pt. supported 15,060* (15,060*) 24,390* (24,390*) 35,740 (39,430*) 28,800 (32,750*) 23,980 (27,800*) 20,400 (23,980*) 17,640 (20,920*) 15,440 (18,350*) 13,650 (16,040*) 12,190 (13,7*) non supported (17,090*) (24,740*) (19,870) (16,250) (13,640) (11,660) (,0) (8,840) (7,8) (6,980) 4-pt. supported 17,090* (17,090*) 24,740* (24,740*) 35,170* (37,460*) 28,280 (31,460*) 23,540 (26,830*) 20,050 (23,150*) 17,370 (20,120*) 15,250 (17,500*) 13,550 (15,060*) 12,170* (12,170*) non supported (25,380*) (19,700) (16,030) (13,430) (11,490) (9,970) (8,760) (7,790) 4-pt. supported 26,060* (26,060*) 34,480* (34,480*) 28,040* (29,340*) 23,3* (25,180*) 19,860 (21,750*) 17,240 (18,8*) 15,170* (16,160*) 13,530* (13,530*) non supported (19,790) (16,030) (13,400) (11,460) (9,970) (8,800) 4-pt. supported 30,480* (30,480*) 26,350* (26,350*) 22,780* (22,780*) 19,670* (19,670*) 16,870* (16,870*) 14,170* (14,170*) RECOMMENDED ATTACHMENTS LIFT HOOK CACTUS GRAB 1.0 yd 3 CACTUS GRAB 1.3 yd 3 CACTUS GRAB 1.6 yd 3 CACTUS GRAB 1.8 yd 3 CLAMSHELL GRAB 1.8 yd 3 CLAMSHELL GRAB 2.1 yd 3 CLAMSHELL GRAB 2.6 m 3 44,092 bs Open or haf-cosed tines Open or haf-cosed tines Open or haf-cosed tines Open or haf-cosed tines up to 3,540 b/yd 3 up to 3,034 b/yd 3 up to 2,023 b/yd 3 Capacity vaues are stated in (bs). The pump pressure is 5,221 psi. The vaues, in accordance with ISO 567, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through 360 on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, couper, ift hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture protection vaves on the ift cyinders and an overoad warning device are required for crane operations. 09
WORKING RANGES/LIFTING CAPACITIES MHL380 D 70 Reach 68.9 ft cranked boom 60 50 Work equipment: Cranked boom 37.2 ft; Stick 29.3 ft; Cactus grab 40 30 20 0 - -20-30 -40 Center of rotation 80 70 60 50 40 30 20 0 3Reach in ft
HEIGHT ft 60 55 50 45 40 35 30 25 20 15 5 0-5 - -15-20 -25 UNDERCARRIAGE STABILIZERS 15 20 25 30 35 REACH ft 40 45 50 55 60 65 non supported (18,440*) (13,180*) 4-pt. supported 18,440* (18,440*) 13,180* (13,180*) non supported (17,1) (13,090*) 4-pt. supported 17,340* (17,340*) 13,090* (13,090*) non supported (16,980*) (14,120) (11,450) 4-pt. supported 16,980* (16,980*) 16,290* (16,290*) 11,740* (11,740*) non supported (16,930*) (14,220) (11,660) 4-pt. supported 16,930* (16,930*) 16,150* (16,150*) 15,520* (15,520*) non supported (17,130*) (14,150) (11,670) (9,620) 4-pt. supported 17,130* (17,130*) 16,240* (16,240*) 15,500* (15,500*) 13,800* (13,800*) non supported (16,940) (13,940) (11,550) (9,600) 4-pt. supported 17,550* (17,550*) 16,520* (16,520*) 15,650* (15,650*) 14,900* (14,900*) non supported (19,650*) (16,470) (13,600) (11,330) (9,470) (7,900) 4-pt. supported 19,650* (19,650*) 18,180* (18,180*) 16,960* (16,960*) 15,930* (15,930*) 15,050* (15,050*) 12,730* (12,730*) non supported (23,040*) (19,400) (15,870) (13,160) (11,020) (9,270) (7,800) 4-pt. supported 23,040* (23,040*) 20,780* (20,780*) 18,980* (18,980*) 17,520* (17,520*) 16,3* (16,3*) 15,120* (15,120*) 13,070 (14,390*) non supported (28,820*) (22,820) (18,420) (15,160) (12,640) (,650) (9,020) (7,650) 4-pt. supported 28,820* (28,820*) 24,920* (24,920*) 22,070* (22,070*) 19,890* (19,890*) 18,160* (18,160*) 16,750 (16,750*) 14,860 (15,560*) 12,9 (14,530*) non supported (48,580) (35,000) (26,780) (21,280) (17,350) (14,390) (12,090) (,250) (8,730) (7,470) 4-pt. supported 52,890* (52,890*) 39,520* (39,520*) 31,870* (31,870*) 26,9* (26,9*) 23,430* (23,430*) 20,830* (20,830*) 18,820* (18,820*) 16,790 (17,2*) 14,560 (15,860*) 12,720 (14,780*) non supported (28,840*) (31,270) (24,470) (19,750) (16,280) (13,620) (11,530) (9,840) (8,450) (7,280) 4-pt. supported 28,840* (28,840*) 44,130* (44,130*) 34,730* (34,730*) 28,800* (28,800*) 24,730* (24,730*) 21,740* (21,740*) 18,950 (19,460*) 16,360 (17,640*) 14,260 (16,120*) 12,530 (14,780*) non supported (17,270*) (28,320) (22,490) (18,370) (15,290) (12,9) (11,000) (9,460) (8,180) (7,1) 4-pt. supported 17,270* (17,270*) 39,8* (39,8*) 36,990* (36,990*) 30,380* (30,380*) 25,390* (25,390*) 21,440 (22,530*) 18,390 (20,000*) 15,950 (17,990*) 13,980 (16,3*) 12,340 (14,8*) non supported (9,0*) (15,860*) (26,420) (21,020) (17,270) (14,470) (12,290) (,550) (9,120) (7,940) (6,960) 4-pt. supported 9,0* (9,0*) 15,860* (15,860*) 28,930* (28,930*) 36,570 (38,380*) 29,480 (31,460*) 24,500 (26,630*) 20,780 (23,090*) 17,900 (20,380*) 15,600 (18,200*) 13,730 (16,370*) 12,190 (14,7*) non supported (11,680*) (16,770*) (25,390) (20,070) (16,470) (13,840) (11,800) (,180) (8,850) (7,760) (6,860) 4-pt. supported 11,680* (11,680*) 16,770* (16,770*) 26,190* (26,190*) 35,490 (38,8*) 28,6 (31,940*) 23,820 (27,030*) 20,260 (23,370*) 17,5 (20,530*) 15,320 (18,220*) 13,540 (16,250*) 12,090 (14,380*) non supported (14,130*) (18,390*) (24,960) (19,540) (15,980) (13,420) (11,460) (9,920) (8,670) (7,650) (6,840) 4-pt. supported 14,130* (14,130*) 18,390* (18,390*) 26,000* (26,000*) 34,900 (38,320*) 28,060 (31,760*) 23,360 (26,950*) 19,900 (23,280*) 17,230 (20,370*) 15,130 (17,970*) 13,430 (15,850*) 12,060 (13,7*) non supported (20,200*) (24,930) (19,350) (15,740) (13,190) (11,280) (9,800) (8,590) (7,640) 4-pt. supported 20,200* (20,200*) 26,850* (26,850*) 34,690 (36,940*) 27,8 (30,900*) 23,1 (26,320*) 19,700 (22,740*) 17,090 (19,840*) 15,040 (17,350*) 13,4 (15,050*) non supported (25,200) (19,430) (15,730) (13,150) (11,240) (9,770) (8,630) (7,740) 4-pt. supported 28,2* (28,2*) 34,670* (34,670*) 27,800* (29,290*) 23,070 (25,080*) 19,660* (21,670*) 17,080* (18,800*) 15,080* (16,230*) 13,520* (13,520*) non supported (19,740) (15,930) (13,290) (11,360) (9,9) (8,800) 4-pt. supported 31,440* (31,440*) 26,850* (26,850*) 23,090* (23,090*) 19,790* (19,790*) 17,090* (17,090*) 14,360* (14,360*) RECOMMENDED ATTACHMENTS LIFT HOOK CACTUS GRAB 1.0 yd 3 CACTUS GRAB 1.3 yd 3 CACTUS GRAB 1.6 yd 3 CACTUS GRAB 1.8 yd 3 CLAMSHELL GRAB 1.8 yd 3 CLAMSHELL GRAB 2.1 yd 3 CLAMSHELL GRAB 2.6 m 3 44,092 bs Open or haf-cosed tines Open or haf-cosed tines Open or haf-cosed tines Open or haf-cosed tines up to 3,877 b/yd 3 up to 3,203 b/yd 3 up to 2,360 b/yd 3 Capacity vaues are stated in (bs). The pump pressure is 5,221 psi. The vaues, in accordance with ISO 567, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through 360 on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, couper, ift hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture protection vaves on the ift cyinders and an overoad warning device are required for crane operations. 11
Terex Construction Americas 8800 Rostin Road Southaven, MS 38671 - USA Te.: (662) 393-1800 Fax: (662) 393-1700 Web: www.terex.com PURPOSE BUILT MHL380 D. Taiored to specific job site requirements. Mobie, fexibe, powerfu: the MHL380 D is the idea oading machine for the diverse requirements of modern port ogistics. The powerfu dua circuit hydrauics and soid structure enabe it to maneuver both quicky and precisey even with heavy oads. A range of attachments ensures maximum fexibiity in use. HIGH PERFORMANCE AND VERSATILITY - A WINNING COMBINATION. In the cab, which can be eevated smoothy to a maximum eye-eve of 20 ft above ground and moved forward by up to 7 ft, the operator maintains an optima view of the working environment, especiay hepfu during the oading and unoading of barges and vesses aong inand waterways and at seaports. Whether from ship to ship or between ship and storage site, hopper or raiway car: the responsive contros and strong swing torque enabe fast, precise working cyces. With these outstanding characteristics the MHL380 D is the answer to improving operating efficiency and job site productivity. Effective date: Apri 2009. Product specifications and prices are subject to change without notice or obigation. The photographs and/or drawings in this document are for iustrative purposes ony. Refer to the appropriate Operator s Manua for instructions on the proper use of this equipment. Faiure to foow the appropriate Operator s Manua when using our equipment or to otherwise act irresponsiby may resut in serious injury or death. The ony warranty appicabe to our equipment is the standard written warranty appicabe to the particuar product and sae and Terex makes no other warranty, express or impied. Products and services isted may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. A rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. Copyright 2009 Terex Corporation. MHL380D-N.A..5K 0409 Part Number 279911