Textile Effects NOVACRON XKS HD reactive inks. Intense shades and savings for industrial ink jet printing

Similar documents
ARALDITE AV 8574 Resin Hardener HV 8574

Build your properties

EPIBOND Adhesive SURFACE MOUNT ADHESIVES

Strengthen your system

Inspiring design innovation

S8JX-N/S8JX-G Series Replacement Brackets

Textile Colors Acetate Acrylic Cotton Modacrylic Nylon Nylon/Lycra Blends Cationic-Dyeable Polyester Polyester Rayon Wool

Polyurea Spray Coatings

Paliotol Yellow K 0961 HD

BeMACROn. High Performance. Disperse dyes with the latest technology for high-performance polyester dyeing. UniqUe ideas. UniqUe solutions.

Selection Guide. Economical, high-performance fluids for precise temperature control. Transfer Fluids by Solutia

SIGMADUR 520. PRODUCT DATA SHEET December 12, 2014 (Revision of May 01, 2013) DESCRIPTION

THERMINOL RD. heat transfer fluid. Low-viscosity, medium-temperature fluid. -36 to 270 C. (--33 to 520 F)

THERMINOL 68. heat transfer fluid. High-temperature, low-viscosity fluid. -26 to 360 C. ( 14 to 680 F)

SIGMADUR PRODUCT DATA SHEET December 12, 2014 (Revision of January 1, 2013) DESCRIPTION. Two-component, high solids polymeric urethane

Lower coatings costs. with Eastman Texanol ester alcohol or Eastman Optifilm enhancer 300. Data

4CR SERIES MOTOR STARTING RELAY All Position, Current-Type

UM0672 User manual. CRX14 and CR14 reference design PCB Gerber files. Introduction

DIN Track Terminal Blocks with Screw Terminals XW5T

THERMINOL 55. heat transfer fluid. Efficient, reliable mediumtemperature-range. -28 to 290 C. (--18 to 550 F)

Extend Compressor Life with UCON RSC-155 Lubricant

AEROSIL 200 F. Hydrophilic fumed silica. Applications and properties. Safety and handling. Packaging and storage. Characteristic physico-chemical data

Eastman TMPD Glycol and Purified Isophthalic Acid

Effective Oxidation Catalysts for Water Treatment and Colour Removal

SIGMATHERM 230 / PPG HI-TEMP 230

SIGMACOVER 805. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2013) DESCRIPTION

SIGMAZINC 102 HS. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION

NEUTRALIZATION SYSTEM FOR OPA & GLUTARALDEHYDE MEDI-NEWT. User Manual. Endoscope reprocessing the the way way it it should be be

SIGMAZINC 109. PRODUCT DATA SHEET January 16, 2015 (Revision of January 5, 2015) DESCRIPTION. Two-component, zinc-rich, polyamide-cured epoxy primer

SIGMAZINC 105. PRODUCT DATA SHEET December 15, 2014 (Revision of July 1, 2013) DESCRIPTION. Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS

Technical Data 3M Petroleum Sorbents

STEVAL-ISV012V1. Up to 5 W solar battery charger for single-cell Li-ion and Li-Pol batteries based on the SPV1040 and L6924D.

SIGMAZINC 68 SP / AMERCOAT 68 SP

Up to 3 W solar and USB battery charger for single-cell Li-Ion and Li-Po batteries based on the SPV1040, STBC21 and STC3100

UK PG 6/23(92) Appendix 3: max g/l (approx. 1.7 lb/us gal) 7.2 m²/l for 125 µm (289 ft²/us gal for 5.0 mils)

Global Oilfield Solutions. Performance Chemicals for Drilling

THERMINOL 62. heat transfer fluid. High performance under low-pressure applications. -23 to 325 C. (--9 to 620 F)

NOVAGUARD 890. PRODUCT DATA SHEET January 21, 2015 (Revision of December 12, 2014) DESCRIPTION

THERMINOL 66. heat transfer fluid. Proven performance for high-temperature, low-pressure applications. -3 to 345 C. (27 to 650 F)

Directive 1999/13/EC, SED: max g/kg max g/l (approx. 2.6 lb/us gal) 6.6 m²/l for 100 µm (265 ft²/us gal for 4.

Advanced Materials. Raising insulation performance in car electronics

SIGMAGUARD 730. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION

THERMINOL 75. heat transfer fluid. Ultrahigh temperature at low pressure. 80 to 385 C. (175 to 725 F)

THERMINOL LT. heat transfer fluid. Wide temperature range, liquid/vapor phase fluid to 315 C. (--103 to 600 F)

-5 F to 620 F. High Performance, Low-pressure Heat Transfer Fluid. Heat Transfer Fluid by Solutia. Technical Bulletin A +400 C +700 F +350 C

IED RELATING TO OIL AND GAS BURNERS FOR INDUSTRIAL USE

INSTALLATION INSTRUCTION & OWNER S MANUAL

NOVAGUARD 840. PRODUCT DATA SHEET January 21, 2015 (Revision of December 12, 2014) DESCRIPTION

THERMINOL 54. heat transfer fluid. Efficient, reliable mediumtemperature-range. 28 to 280 C. (- 18 to 540 F)

Fitting Instructions Kit Nos. 9100, 9110, 9120 MECHANICAL POWER TAKE-OFF

Product Overview. Polymer ST and TEGOPAC

PRODUCT SAFETY DATA SHEET

Kyung-In Synthetic Corporation. Be Bold with Brilliant Neon Colors

Better Productivity by Standstill and Low-speed Monitoring

Acronal PLUS Achieving high performance with value for interior architectural coatings

IN THE UNITED STATES DISTRICT COURT FOR THE WESTERN DISTRICT OF NORTH CAROLINA CHARLOTTE DIVISION ) ) ) ) ) ) ) ) ) COMPLAINT FOR PATENT INFRINGEMENT

THERMINOL VP-3. heat transfer fluid. High-temperature, low-odor, vapor/liquid phase fluid. 2 to 330 C. (36 to 625 F)

VALVOLINE HYDRAULIC OILS PEOPLE WHO KNOW USE VALVOLINE

BEMACRON HP / SEL HIGH PERFORMANCE DISPERSE DYES WITH THE LATEST TECHNOLOGY FOR HIGH-PERFORMANCE POLYESTER DYEING. Bezema Colour Solutions.

PRODUCT SAFETY DATA SHEET

Market Briefing: Mergers & Acquisitions World, Region, & Country

Ø 5 mm Film Dielectric Trimmers

PRODUCT SAFETY DATA SHEET

Industrial Waxes Textile & Leather

STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications

Manufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1

ENCOR Flex 3186 Styrene-Acrylic Latex for Elastomeric Coatings

1/4" Square Single-Turn Cermet Sealed Trimmer

MANSI CLS Series LPG/CNG Closed Loop System with Harness and Actuator Motor

BIN & SEN Annular Pitot Tube Flow Meter. Form: 10-PTT-UM (December 2012) Installation & Operation Manual

ALPHA OM-5002 HIGH SPEED, PIN TESTABLE SOLDER PASTE

THERMINOL 72. heat transfer fluid. High temperature, excellent stability at medium pressure. -14 to 380 C. (7 to 715 F)

Product Title Abstract

PRODUCT SAFETY DATA SHEET

SIGMAGUARD CSF 660. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2009) DESCRIPTION

2AM/3AM/4AM/8AM SERIES Motor Protector

Eastman plasticizers. Bulk storage guidelines. Storage equipment. Tank components and materials. Piping. Pumps. Valves. Gaskets

The performance to compete. The versatility to comply.

Aluminum Capacitors Standard C Snap-In

PRODUCT SAFETY DATA SHEET

NOVAGUARD 810. PRODUCT DATA SHEET December 11, 2014 (Revision of April 1, 2014) DESCRIPTION

Power Panel 6 W Potentiometer

SIGMACOVER 350. PRODUCT DATA SHEET December 12, 2014 (Revision of June 1, 2014) DESCRIPTION

Carbon Black Pigments. Technical Data / Americas

ATC Series QSFP CP Active Transceiver Cooler

USER AND OWNER MANUAL

USER AND OWNER MANUAL

LITHIUM MANGANESE DIOXIDE

SilFORT* SHP401. Technical Data Sheet. SilFORT* SHP401. Description SilFORT AS4000 Hard Coat

AJN Joystick. Introduction. Main Features. Custom Modifications. Electrical SPECIFICATIONS

Dräger Porta Control 3000 Test Equipment

TruckWeigh. PM Onboard. Selection Guide. Overload Monitoring System for Medium and High Capacity Trucks. A Brand of VPG On-Board Weighing

1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer

Power Solutions. Cat Generator Sets for Petroleum Applications

Our cleaning science gets you back to business faster. Chematic Cleaners

Commercial Vehicle Tyres Delivery Range

Polymer ST and TEGOPAC. Product Overview

DIN Track Terminal Blocks with Screw Terminals

ATC Series XFP CP Active Transceiver Cooler

Transcription:

Textile Effects NOVACRON XKS HD reactive inks Intense shades and savings for industrial ink jet printing

NOVACRON XKS HD Reactive inks for industrial printing machines based on Kyocera printing heads Have you been looking for a way to achieve deeper shares only to be frustrated by existing technology limitations? NOVACRON XKS HD together with PREPAJET UNI is a new system developed for superior printing results. Benefits Full and safe solution for reactive inks using Kyocera print heads printers NOVACRON XKS HD Unique, never before seen deep shades on all Cellulosic and Silk fibers Achieve deeper shades previously unattainable Reliable printing and optimal runnability Reduce ink consumption and coloration cost

NOVACRON XKS HD Textile preparation The goods are prepared by padding with: Cotton or Viscose 40 80 g/l PREPAJET UNI 100 300 g/l urea* 40 g/l alkali*, e.g. soda ash 20 g/l LYOPRINT RG (anti-reduction agent) 10 g/l LYOPRINT AIR 1:1 (de-aerating agent) pick up 70 80% Silk 50 100 g/l PREPAJET UNI 80 100 g/l urea 15 g/l alkali, (sodium bicarbonate) 10 g/l LYOPRINT RG (anti-reduction agent) 2 g/l LYOPRINT AIR 1:1 (de-aerating agent) pick up 70 80% *amount dependent on type of fabric and fixation method Ink jet printing See the instructions issued by the manufacturer of the ink jet printer. The optimal printing conditions are: temperature 20 25 C/68 77 F, humidity > 60%. Fixation Cotton steam at 102 C/216 F for 7 10 min or thermofix at 140 150 C/284 302 F for 3 5 min Viscose steam at 102 C/216 F for 7 10 min Silk steam at 102 C/216 F for 10 12 min Washing off The composition and sequence of the treatment baths depend on the fabric and machinery available. Cotton/Viscose/Silk rinse 5 min with cold water soap for 5 min at 98 C/210 F with 2 g/l ERIOPON R rinse for 3 min at the boil rinse warm/cold

NOVACRON XKS HD Yellow XKS HD 1000 NOVACRON XKS HD Orange XKS HD 3000 Red XKS HD 4500 Magenta XKS HD 5000 NOVACRON XKS HD range Pattern 100% 100% 100% 100% Color Values on CO L* 87 58 44 38 a* -8 59 61 60 b* 97 68 29 12 Fastness Properties Xenonlight (ISO 105-B02) 6 7 4 4 4 Water CO 5 4 4 5 5 (ISO 105-E01) WO 5 4 5 5 Washing 95 C, E1S CO 5 4 4 5 5 (ISO 105-C06) WO 5 4 5 5 Chorine water, 20 mg/l (ISO 105-E03) Ch 4 5 4 4 5 3B Perspiration acid CO 5 4 5 5 4 Perspiration Alkaline CO 5 4 5 5 4

NOVACRON XKS HD Blue XKS HD 6000 NOVACRON XKS HD Turquoise XKS HD 7000 Grey XKS HD 8000 Strong Black XKS HL NOVACRON XKS HD range Pattern 100% 100% 100% 100% Color Values on CO L* 39 50 45 20 a* 9-36 -1 1 b* -50-28 -1-5 Fastness Properties Xenonlight (ISO 105-B02) 6 6 3 5 Ch 5 5 5 5 Water CO 5 4 5 5 4 5 (ISO 105-E01) Ch 5 4 5 5 4 5 Washing 95 C, E1S CO 5 4 5 4 5 (ISO 105-C06) Chorine water, 20 mg/l (ISO 105-E03) Ch 3B 3Y 3-4R 4 Ch 5 5 5 4 5 Perspiration acid CO 5 4 5 5 4 5 WO 5 5 4 5 4 Ch 5 5 5 4 5 Perspiration Alkaline CO 5 5 5 4 5 WO 5 5 4 5 4 5

Headquarters Huntsman (Singapore) Pte Ltd Textile Effects Division 152 Beach Road #29-00 Gateway East Singapore 189721 Telephone +65 6297 3363 Fax +65 6298 0037 Europe Region Huntsman Advanced Materials (Switzerland) GmbH, Textile Effects Klybeckstrasse 200 4057 Basel, Switzerland Telephone +41 61 299 11 11 Fax +41 61 299 11 12 Americas Region Huntsman International LLC Textile Effects 3400 Westinghouse Blvd, Charlotte, NC 28273, USA Telephone +1 704-587-5000 Fax +1 704-587-5020 Asia Region Huntsman Textile Effects (China) Co. Ltd. Flying Geese Mountain Industrial Park Shilou Town, Panyu District, Guangzhou 511447, PR China Telephone +86 20 3937 7000 Fax +86 20 8484 5222 Edition 2014 Copyright 2014 Huntsman. All rights reserved. All product trademarks mentioned are registered trademarks of Huntsman Corporation or an affiliate thereof in one or more, but not all countries. IMPORTANT: The following supersedes Buyer s documents. Sales of the product described herein ( Product ) are subject to the general terms and conditions of sale of either Huntsman Advanced Materials LLC, or its appropriate affiliate. Huntsman warrants that at the time and place of delivery all Products sold to Buyer shall conform to the specifications provided to Buyer by Huntsman. While the information and recommendations included in this publication are, to the best of Huntsman s knowledge, accurate as of the date of publication, NOTHING CONTAINED HEREIN (EXCEPT AS SET FORTH ABOVE REGARDING CONFORMANCE WITH SPECIFICATIONS PROVIDED TO BUYER BY HUNTSMAN) IS TO BE CONSTRUED AS A REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHTS, OR WARRANTIES AS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND THE BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER RESULTING FROM THE USE OF SUCH PRODUCT, WHETHER USED SINGLY OR IN COMBINATION WITH OTHER SUBSTANCES. No statements or recommendations made herein are to be construed as a representation about the suitability of any Product for the particular application of Buyer or user or as an inducement to infringe any patent or other intellectual property right. Buyer is responsible to determine the applicability of such information and recommendations and the suitability of any Product for its own particular purpose, and to ensure that its intended use of the Product does not infringe any intellectual property rights. The Product may be or become hazardous. The Buyer should obtain Material Safety Data Sheets and Technical Data Sheets from Huntsman containing detailed information on Product hazards and toxicity, together with proper shipping, handling and storage procedures for the Product, and should comply with all applicable governmental laws, regulations and standards relating to the handling, use, storage, distribution and disposal of, and exposure to the Product. Buyer shall also take all steps necessary to adequately inform, warn and familiarize its employees, agents, direct and indirect customers and contractors who may handle or be exposed to the Product of all hazards pertaining to and proper procedures for safe handling, use, storage, transportation and disposal of and exposure to the Product, and the containers or equipment in which the Product may be handled, shipped or stored. Please note that products may differ from country to country. If you have any queries, kindly contact your local Huntsman representative. Huntsman is a member of: (Ecological and Toxicological Association of Dyes and Organic Pigments Manufacturers) www.huntsman.com/textile_effects 873051e January 2015, Printed in China.