RECHARGEABLE 24 LED WORK LIGHT

Similar documents
DISC BRAKE CALIPER TOOL SET

SIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

25 GALLON PORTABLE OIL LIFT

Swing Arm Magnifying Lamp

Digital Auto Multi-Tester

6 OFF ROAD LIGHT BAR

For technical questions and replacement parts, please call

Owner s Manual & Safety Instructions

SUBMERSIBLE PUMP. Model ASSEMBLY AND OPERATING INSTRUCTIONS

SUBMERSIBLE POND PUMP

SUBMERSIBLE MINI-PUMP

PUSH BUTTON KEY CABINET

Owner s Manual & Safety Instructions

1250 LB. CAPACITY MECHANICAL WHEEL DOLLY

flexible infrared thermometer

CAMBELT TENSION GAUGE

IMPORTANT SAFETY INFORMATION

Component Size Weight Capacity

Installation Precautions. Use Precautions. Specifications

Owner s Manual & Safety Instructions

p.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.

Owner s Manual & Safety Instructions

IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

Owner s Manual & Safety Instructions

Table of Contents. Safety... 2 Specifications... 3 Setup Parts List and Diagram Warranty Operation Maintenance

1000 Lb. Motorcycle Lift

Welding Clips. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

Manual Operated Floor Jack

Automatic Emergency Light

IMPORTANT SAFETY INFORMATION

1200W Paint DRYING Lamp

SPECIFICATIONS GENERAL SAFETY RULES PERSONAL SAFETY. Save This Manual TOOL USE AND CARE WORK AREA

POLISHER KIT Model 95030

1/2 Ton - 2 Stage Transmission Jack

will result in death or serious injury. could result in death or serious injury. Indicates a hazardous situation which, if not avoided,

Manual Operated Floor Jack

360 Watt Charge Controller

Owner s Manual & Safety Instructions

MINI AIR ANGLE DIE GRINDER

AIR COMPRESSOR 2 HP - 8 GALLON

WINDSHIELD REMOVAL KIT

MOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:

ANGLE DIE GRINDER KIT

PISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA 93011

Square Solar Garden Light 95706

BATTERY CHARGER WITH LCD DISPLAY

WHEEL KIT FOR 13 HP GENERATOR

2 PIECE SOLAR LIGHT SET 93886

UTILITY WAGON WITH 1000 LB. CAPACITY

TURTLE SOLAR LIGHT 94412

Rio color changing solar light

4 AIR ANGLE GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:

3 PC. SOLAR GARDEN LIGHT SET 92686

14.4 CORDLESS DRILL ASSEMBLY AND OPERATING INSTRUCTIONS

3-1/2 Digit LCD Multimeter with Tachometer Kit

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at

2 GALLON COOLANT PUMP

SUBMERSIBLE DIRTY WATER PUMP

SPOTLIGHT 30 MILLION CANDLEPOWER

4 TIER STOCKER SERVICE CART

SEALER-15-1/2 ELECTRICAL IMPULSE

ELECTRIC HYDRAULIC GEAR PUMP

rechargeable umbrella light

4 in 1 solar bird bath

OPERATING INSTRUCTIONS

WOODEN SIDE PANEL KIT

2-1/4 Gallon Sprayer

Bucket Grease Pump ASSEMBLY AND OPERATING INSTRUCTIONS

Specifications. Important Safety Information

ELECTRIC LONG SHAFT DIE GRINDER 44141

MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892

ASSEMBLY and OPERATING INSTRUCTIONS Mission Oaks Blvd. / Camarillo, CA 93011

EIGHT GALLON PSI AIR COMPRESSOR

Owner s Manual & Safety Instructions

BATTERY OPERATED BI-PLANE

Kushlan Products, Inc. !IMPORTANT! Read Me First!

4 color Solar light. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

POWER INVERTER 700 WATT / 1800 WATT PEAK

HYDRAULIC SPRING COMPRESSOR SET

Compressor Duty Motor - 1 HP. Model 40132

OWNER'S MANUAL GPW Series

VP Remote User s Manual (nvp)

IMPORTANT READ ME FIRST

Propane torch. Model Assembly And Operation Instructions

MOUNTABLE WALL SINK ASSEMBLY AND OPERATING INSTRUCTIONS

EX Series User Manual

Swing Back Trailer Jack

TRAILER SPRAYER 25 GALLON WITH TRAILER

User Manual. FRESH AERO EasyBrow Plug-In Battery Operated LED Eyebrow Light For Most Aircraft. Where Imagination Meets Innovation

BATTERY ISOLATOR. Model 93801: 70 Amp Model 93802: 90 Amp

OPERATING INSTRUCTIONS. Note: 6V Charging. Requires Manual Shut Off.

Owner s Manual & Safety Instructions

OWNER'S MANUAL SLT-330F Scissor Lift Table

TWIN HALOGEN SHOP LIGHT

Owner s Manual & Safety Instructions

Operating Instructions and Parts Manual Long Chassis Service Jacks

9 HID OFF-ROAD LIGHT

CHIPPER/SHREDDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS

Trailer Jack. Model Assembly and Operating Instructions

Transcription:

RECHARGEABLE 24 LED WORK LIGHT MODEL 95181 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements; actual product may differ slightly from product described herein. 3491 Mission Oaks Blvd. Camarillo, CA 93011 Visit our Web Site at http://www.harborfreight.com Copyright 2006 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained within may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. SKU 95181 For Technical questions, or replacement parts, please call 1-800-444-3353.

FEATURES Super Bright LED Light that lasts up to 80,000 HRS. Retractable 360-Degree Nylon Swivel hook. High impact polycarbonate & ABS housing, extremely durable. High-Impact polycarbonate Lens. Easy access ON-OFF switch. Replaceable Battery pack. Includes UL Listed AC/DC Adapter and DC 12V Adaptor/Car plug. LED Charging Indicator/Battery Short Life Indicator. SPECIFICATIONS Overall Dimensions: 8-13/16"L X 2-3/4"W X 1-1/2"D Net Weight: 1.05 LBS. Power Source: Qty. 3, 3.6V, 1800 mah Ni-MH Battery (Rechargeable) Charging Time: 7-8 Hours Continuous Run Time: 4.5-5.5 Hours 24 LED Light Bulbs: 12,000 MCD - Super Bright LED Indicator: Red = Charging, Green = Charging complete Fast Acting 2 AMP Fuse: F2A25OV AC adaptor: Input: 120V, 120 ma/output: 9V DC 300 ma SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product s serial number in the back of the manual near the assembly diagram, or write the month and year of purchase if the product has no serial number. Keep this manual and invoice in a safe and dry place for future reference. SKU 95181 For technical questions, please call 1-800-444-3353. Page 2 REV 02/07

WARNINGS SPECIFIC TO THIS RECHARGEABLE WORK LIGHT 1. Use only in dry locations. Keep Adapter plug and socket dry at all times. 2. Only use the two Adapters provided with this Rechargeable Work Light. Use of any other Adapter may damage this tool. 3. DO NOT look into or shine LED light into eyes of people or animals. 4. DO NOT submerge in water or any other liquid. 5. Keep away from children. Children are not aware of the damage improper use of this Rechargeable Work Light can cause if shined in either their own eyes or the eyes of another. 6. Always properly dispose of all used batteries. 7. Do not operate Work Light if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is doubt, do not operate Work Light. 8. Do not operate the Work Light in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Electrical products create sparks which may ignite the dust or fumes. 9. Always disconnect the Adaptor before making any adjustments or storing the Work Light. 10. Turn off Work Light before leaving the work area. Warning: Never charge this worklight by any other 12V car plug not supplied with this product. CAUTION: The warnings, precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and general caution are factors that cannot be built into this product but must be supplied by the operator. UNPACKING When unpacking, lay out parts and take inventory against the parts list on page 5 to insure that all parts are included. If parts are missing or damaged, please call 1-800-444-3353 for assistance. OPERATION NOTE: Before using Work Light for the first time, fully charge the Battery. 1. Use the Push Button, located below the lens for ON-OFF mode. 2. To suspend the light, pull out the Hanging Hook, located on the top of the Rechargeable Work Light. The Hanging Hook can rotate 360 in rotation for multiple positioning. If you are not using the Hanging Hook, simply push it into its down position. (Figure 1, next page) SKU 95181 For technical questions, please call 1-800-444-3353. Page 2

SKU 95181 For technical questions, please call 1-800-444-3353. Page 3 CHARGING 1. Use the supplied AC/DC Adapter, see (Figure 2), or the DC Adapter with the Car Plug, see (Figure 3), for connecting the Rechargeable Work Light to the correct power source. 2. Plug the end of the correct Adapter into the Recharge Port (5). 3. The Charging Indicator (6) will turn from RED to GREEN as the Battery becomes fully charged. 4. The Charging time is 7-8 hours. SKU 95181 For technical questions, please call 1-800-444-3353. Page 4

WARNING: Do not leave the Battery in a discharged state. Charge the Battery once a month if the light is not in use. This will keep the Battery from wearing down and add to its life. NOTE: The LED Lights in this Rechargeable Work Light are exceptionally long lasting, and are NOT replaceable. PARTS LIST 1. ON-OFF Button 2. Retractable Hanging Hook (Swivels 360 ) 3. LEDs 4. Low Battery Indicator 5. Recharge Port 6. Charging Indicator 7. Screw for opening the Battery Compartment 8. Battery Compartment 9. Battery Compartment Cover 10. Battery NOTE: Some parts are listed for illustration purposes only, and are not available individually as replacement parts. SKU 95181 For Technical questions, please call 1-800-444-3353. Page 5

PARTS DIAGRAM SKU 95181 For technical questions, please call 1-800-444-3353. Page 6

ATTACH RECEIPT OR COPY OF RECEIPT TO THIS PAGE Write Serial Number (if available) or Model Number and Purchase Date here,. WARRANTY LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ninety days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 (800) 444-3353 SKU 95181 For technical questions, please call 1-800-444-3353. Page 7