& Motors, High Performance & Premium Efficiency Alum. EPAct Aluminum And Steel TEFC & ODP Motors C O M P LIA N T
or : High Performance and Pr Beyond Energy Efficient Lincoln and motors provide both premium energy efficiency and outstanding performance. They comply with or exceed the energy efficiency requirements of the United States and Canada for general-purpose motors while delivering new levels of starting torque, overload capability, application versatility, and reliability. More Starting Torque and motors provide excellent starting torque. In fact, most models have a starting torque rating which is normally associated with specialty designs such as NEMA Design C! For dependable "get-up and go" capability with off-theshelf availability, get a Lincoln or motor. TORQUE (% of Full Load) 300 225 150 75 SPEED-TORQUE CURVE 50 HP 1800 RPM TEFC 2 Motor NEMA Design C NEMA Design B 0 300 600 900 1200 1500 1800 SPEED (RPM) More Overload Capacity With an industry-leading service factor on most models*, and motors provide peace of mind in uncertain situations. Whatever comes their way, these motors deliver the overload assurance to let you rest easy. 1.25 Service Factor Speed (RPM) TEFC ODP 3600 1 to 75 HP 1 to 200 HP 1800 1 to 75 HP** 1 to 200 HP 1200 1 to 50 HP 1 to 75 HP * See LC100 catalog for details. ** 2: 1 to 60 HP. Beyond Effic
Lincoln Motors Deliver emium Efficiency More Operating Voltages and motors are nameplated for a variety of operating voltages that can reduce your inventory requirements. all 230/460 Volt, 60 Hz models are nameplated for 208 Volt, 60 Hz operation*. most 230/460 and 460 Volt, 60 Hz motors are nameplated for 50 Hz operation* on 380 and/or 415 Volts. ent. Vary the Speed, Reap the Benefits Everyone knows the potential benefits of using inverter or variable-speed drives. For that reason, most and motors (230/460 and 460 Volt, 60 Hz ) are Inverter-Rated* for use with any brand drive and at any carrier frequency. And to make matters as simple and inexpensive as possible, filters and power conditioning devices are not required. Precedent-Setting Warranty Protection Expect ultimate reliability from your Lincoln or motor. For over 15 years, Lincoln has backed its motors with a precedent-setting five-year warranty (on sine-wave power. See LC100 catalog for warranty information on inverter-power). No other motor manufacturer has expressed as much confidence in the design, manufacturing quality or performance of its motors. Warranty claims are handled on the spot through our wide network of conveniently located Lincoln authorized warranty shops. Aluminum And Steel TEFC & ODP Motors
Innovative Engineering and M Take These Motors Beyond Ventilation Systems That Get Rid Of Heat Fast Heat kills motors. A cool-running motor lasts longer because its insulation system lasts longer. In fact, every 10 C drop in operating temperature doubles the expected life of the insulation. To remove heat fast, Lincoln utilizes extruded aluminum frames in TEFC sizes 182T-286T and stagger-stacked laminations in TEFC sizes 324T-449T and in ODP, 284T-449T. Aluminum is a great heat sink. In fact, it pulls heat away from motor windings four times faster than cast iron or steel. The extrusion process enhances aluminum s heat conducting properties by allowing the frame sections to have thinner fins placed closer together. The result is more fins and greater surface area for maximum cooling. Total Temperature ( C) 160 150 140 130 120 110 100 90 80 70 60 CLASS F 155 Aluminum Frame Motors Steel Frame Motors CLASS B 130 1 Motors 2 Motors 155 130 3 5 7.5 10 15 Unique Stagger-Stacked Laminations Increase Cooling Successive layers of square laminations are shifted or indexed during stator manufacture. In steel TEFC motors, ambient air is blown at high velocity through a channel formed by the motor s innovative double shell configuration. The lamination stack protrudes into the channel. In ODP motors, ambient air is drawn into the motor at both ends, is circulated over and around the entire lamination stack and is exhausted out through the sides. Both enclosures demonstrate a very effective heat transfer system due to direct contact between the heat source and the cooling medium. 20 25 30 Horsepower (1800 RPM) 40 50 60 75 100 125 150 200 250 300 350 400 An Insulation System Second to None! Five Year Warranty All insulating materials used in the manufacture of Lincoln motors have a thermal rating of Class F, H or higher. Lincoln employs quality varnishes to further enhance the insulation system and maximize electrical life. Superior insulating materials lengthen motor life Where Used Thermal Rating U-top, slot Class F - 155 C phase insulation above Class H - 220 C U-top, slot divider Class H - 180 C sleeving to cover lead to coil connection Class F - 155 C windings above Class H - 200 C
aterials Selection Mere Efficiency We Haven t Forgotten the Importance of the Bearing System A bearing s life is shortened by friction and heat. Dust, dirt or other contaminants damage ball and race surfaces. If a bearing fails, good chance the motor fails, too. Lincoln uses: double-shielded deep-groove ball bearings moisture-resistant polyurea lubricant slingers on all drive shafts and on the fan end of TEFC motors (competitors use them only on their severe duty motors) Lincoln Steel Frame Motors: They Don t Come Any More Durable Than This First, a little metallurgy: the yield strength of steel is higher than the ultimate strength of cast iron. This makes steel much stronger and 250% more rigid than cast iron. Cast iron is perceived as a rugged motor frame material because of its bulkiness, when in reality its relatively fragile nature requires 2-1/2 times as much metal to approach the performance of steel. And when it comes to impact loads, steel provides much greater resistance to cracking. A Steel Frame with Foot Flatness to Rival the Best Cast Iron Frames Lincoln s quality manufacturing techniques produce steel frame motors that meet the demanding IEEE 841 specification for foot flatness (to 0.005"). All of our steel motors from 284T and up meet this spec, which was written for top-of-the-line cast iron frame motors. The Best Way to Describe Lincoln s Aluminum Frame Motors: Tough We use an extruded aluminum alloy for our frames- not cast aluminum. The extrusion process provides dense sections free from slag inclusions, porosity and other defects which reduce the physical performance of cast aluminum frames. In addition, extruded aluminum when compared to cast iron or cast aluminum has a greater resistance to cracking under impact loads. Extruded aluminum cooling fins will bend when struck; cast iron fins tend to break. Plus, the natural corrosion resistance of extruded aluminum is far superior to cast aluminum at slowing degradation from chemical attack. Aluminum Motors Take the Heat at Steel Mill Talk about durability! An integrated steel producer uses dozens of Lincoln aluminum frame inverter-fed AC motors on its 84" holding table. Chosen for their performance capabilities, they have dramatically outlasted the DC motors they replaced. Aluminum And Steel TEFC & ODP Motors
Motors For Special Ser WASH-THRU For Extremely Harsh Environments; Pressure Encapsulated Windings Keep Em Going Where moisture and contaminants are a real problem, you should consider a Lincoln Wash-Thru motor. Unlike conventional "washdown" motors which attempt to seal out the elements our Wash-Thru motors have completely pressure encapsulated windings. This isolates the motor component most vulnerable to moisture damage. Service life has been demonstrated to be up to 800% greater than motors designed for washdown use. Wash-Thru motors can provide an improvement in plant efficiency and a reduction in maintenance costs due to an increase in process up-time. drop-in replacement for TEFC and TENV "washdown" motors full length 303 stainless steel shaft high quality double-sealed bearings and v-ring shaft slinger stainless steel nameplate FDA approved white finish paint CRUSHER DUTY Belt Me (I can take it); Lincoln Crusher Duty Motors Meet the Demands of the Aggregate Products Industry Lincoln Crusher Duty motors are designed for the severe belted-load applications found in size reduction equipment such as rock crushers, pulverizers and conveyors. These motors also have the "get up and go" capability necessary to start aggregate industry equipment and the overload capability to keep it going. rugged, welded heavy-gauge steel frames drive-end roller bearing and hi-strength 4340 steel shaft horizontal or vertical shaft down mounting inverter-rated over temperature protection three Class F thermostats two levels of energy-efficiency available across-the-line, y-delta/start-delta and part-winding start capability
vice Conditions AGRICULTURE Long Life Motors for Farm and Agricultural Applications This season, upgrade your Agricultural or Farm Duty motor to a Lincoln. aeration fan agriculture fan foot mount-belt drive PSC variable speed direct drive-thru bolt resilient base-thru bolt single and two speed auger drive crop dryer (1Ø & 3Ø) farm duty/agriculture high torque (HT) extra high torque (EHT) General Specifications TEFC Frame Sizes 143T-215T (steel) 182T-286T (extruded aluminum) 324T-449T (steel) ODP Frame Sizes 143T-256T (steel) 284T-449T (steel) Horsepower Range 1-400 (TEFC) 1-500 (ODP) Speeds 3600, 1800, 1200, 900 RPM Service Factor 1.25 on most ratings (see LC100 catalog for details) Insulation System Premium Class F Design B Windings 100% copper 200 C EPAct C O M P LIA N T Fractional HP Motors from Lincoln An Exceptional Value ideally suited for industrial and commercial applications single- and three-phase AC durable rolled steel frame 48 and 56 frame sizes 3600, 1800 and 1200 rpm washdown, brake and explosion-proof models available made in U.S.A. grain stirring CSA Qualified Testing Lab BEARING SIZES (SINGLE EXTENSION) FOOT MOUNT Frame Size DE Opp DE 182T-184T 207 205 213T-215T 208 206 254T-256T 309 208 284T/TS-286T/TS 310 209 324T/TS-326T/TS 311 309 364T/TS-365T/TS 313 311 404T/TS-405T/TS 315 313 444T/TS-449T/TS 318 315 (1800 & 1200 RPM) 444TS-449TS 315 315 (3600 RPM) Frame Size DE Opp DE 143T-145T 205 203 182T-184T 206 TEFC:205 ODP:203 213T-215T 307 206 254T-256T 309 TEFC:207 ODP:208
Single Phase Three Phase Cast Iron ODP TEFC Explosion-Proof ODP TEFC Severe Duty TEFC IEEE 841 TEFC Automotive Duty Explosion-Proof Wash-Thru & Washdown Crusher Duty Agriculture/Farm Duty Metric Frames Part of the Most Universal AC Motor Offering Available Lincoln has single and three-phase motors for nearly any industrial and commercial application. And, with our extensive distributor network in the U.S. and Canada, we ve got product and service near you. For your nearest Lincoln representative, call 1-800-MOTOR-4-U. Extruded Aluminum Beyond Efficient. Horsepower Steel 1/4 1/3 1/2 3/4 1 1.5 2 3 5 7.5 10 15 20 25 30 40 50 60 75 100 125 150 200 250 300 350 400 450 500 800 E60 4/01 Cleveland, Ohio 44092-2539 U.S.A. 1-800-MOTOR-4-U Fax: 1-216-731-5401 E-mail: mailbox@lincolnmotors.com Web: www.lincolnmotors.com is a registered trademark and is a trademark of Lincoln Motors, Electrical Group, Regal-Beloit Corporation 2001 Lincoln Motors