www.eastjordanplastics.com 1

Proudly providing high-quality products to clients throughout North America East Jordan Plastics is a family owned business. We thank our dedicated employees and our loyal customers for all their years of support. Our goal is to earn your business each and every season. We strive to meet your individual needs when it comes to production timing, product quality and delivery efficiency. To that end, we develop an interactive relationship with all our customers that fosters an open dialog. We still believe in good old-fashioned hard work, and we continue to thrive by producing high quality products and by offering the best personal service in the industry. East Jordan 6400 M-32 Hwy, East Jordan, MI 49727 Beaverton 4378 South M-18, Beaverton, MI 48612 South Haven 1600 Stieve Drive, South Haven, MI 49090 Distribution Warehouse 100 Veterans Blvd, South Haven, MI 49090 Table of Contents About East Jordan Plastics... 2 Project 100%... 6 Printing... 8 Shuttle Brand Hanging Baskets, Planters & Injection Molded Pots... 9 SHUTTLE POT Brand Flower Pots...12 Plant Rings & Pot Cages...15 SHUTTLE TRAY Brand Flower Trays...16 SHUTTLE Brand Squares and Pot Carriers...20 Plug and Propagation Trays...23 Landscape Market Trays...27 Liner Sheets...28 Sheet of Pots...29 Injection Molded Trays...30 A Series Flats and Inserts...31 T Series Flats and Inserts...35 S Series Flats and Inserts...39 L Series Flats and Inserts...43 C, CT, E, G, K, P, Y Series Flats and Inserts...45 Compatibility Charts...51 Color Guide...54 2 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Bryan Diller, Scott Diller, Katie Doran, Cal Diller, Matt Diller and Nathan Diller To Our Valued East Jordan Plastics Customers, Three generations ago, our founders Ken and Shirley Diller settled in East Jordan, Michigan because of the natural abundance of cedar trees needed to produce wooden greenhouse flats. The company operated under the name of East Jordan Box and Crate Co. until the mid-1960 s. As the company transitioned to manufacturing trays and inserts from wood to plastic material, the name was changed to East Jordan Plastics, Inc. Our name has been recognized in the industry as a quality container manufacturer for more than 70 years. Throughout the years, we have never forgotten our roots and efforts in being 100% dedicated to the horticulture industry. We have grown into a multi-facility manufacturing company, while focusing on continued investment in our employees, technology and closed loop recycling. We are excited by the opportunity to serve our customers and the industry as a whole, and it is our ultimate goal to continue as long as plants need containers. We wouldn t be where we are without the dedication of our employees, and ultimately your loyalty to East Jordan Plastics, Inc. Thank you for Growing with us for 70 years! The Diller Family www.eastjordanplastics.com 3

Why is East Jordan Plastics the best company for you? 1 3 2 4 4

5 Our Packaging Today most of our product is shipped bulk on pallets. However, product is also packaged in corrugated cartons, corrugated sleeves, and plastic bags. We usually can accommodate special packaging requests. 7 How We Help Grow Your Sales We offer up to 8-color offset printing and adhesive labeling, as well as graphic design services to help you create branding and merchandising programs that can grow business. 6 Our Commitment To Product Development We are constantly refining our products and processes to benefit growers. In addition, we actively seek grower input to jointly design and bring new products to market. Our Recycling Program Our commitment to recycling impacts your waste removal costs, significantly reduces the amount of plastic going to landfills, and shows your customers that together we are concerned about the 8environment. 9 Our Delivery Record Our own fleet of East Jordan Plastics trucks and several reliable carriers allow us to control delivery schedules and make sure your order arrives on time. Our veteran drivers know many of our customers personally. 3 5

The East Jordan Plastics Recycling Program Responsibly Green CLOSED LOOP RECYCLING Reuse Containers are manufactured from recycled plastic. Reduce Reduce the volume of plastic in landfills while saving on waste removal fees. Recover Used containers are recovered from greenhouses or post-consumer level. Recycle Containers are recaptured for reuse by growers or processed into regrind for manufacturing new containers, closing the loop. We want your used plastic growing containers. 6 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

It s Easy to Recycle with East Jordan Plastics We recycle PS, PP and HDPE Containers do not have to be cleaned. Knock your containers free of residual soil to allow for nesting. Please separate material by type PS PP HDPE Polystyrene: labeled with #6 Polypropylene: labeled with #5 High Density Polyethylene: labeled with #2 Palletize material Nest like-containers together and strap or wrap Nest products 90"-100" tall for single pallets or up to 48" for double stacking pallets. Pick-up Truckload quantities are ideal. LTL quantities can be arranged. We can easily coordinate pick-ups with deliveries of finished product. EJP will also accept deliveries of used horticulture containers to our South Haven facility. Our Commitment to Recycling East Jordan Plastics (EJP) has been a recycler of plastic since the early 60 s when we first began thermoforming plastic flats and inserts. Even then we realized the importance of recycling. Today EJP has engineered and implemented a closed loop recycling process that uses proven technology and that ensures maximum energy efficiency and quality products. The first processing line of our 130,000 square foot facility in South Haven, Michigan has the capacity to recycle over 15 million pounds of material annually. Other lines will be added as needed. At EJP we strongly believe that the best way to achieve sustainability is to recycle and reuse what we manufacture. With this in mind, it is our position that the most sustainable growing container is one made from recycled plastic. Advantages of Recycling Plastic Horticultural Containers Recycled plastic containers can recover upwards of 60% of the energy put into processing the product initially. The recycling closed loop for plastic containers is repeated each time the material is recycled with significant energy recovery gains. Horticultural containers avoid landfills and are returned directly to our manufacturing stream. Benefits to Growers and Retailers Reduce waste removal fees by keeping containers out of dumpsters and landfills Enhance your public image as a wise steward of the environment by using sustainable plastic growing containers Assist EJP with securing valuable recycled raw material and helping control input costs Create opportunities for selective containers to be reused Increase foot traffic as consumers return their containers to your garden center Attract new customers from non-participating retailers Achieve a better sustainable footprint due to trash reduction www.eastjordanplastics.com 7

Set your plants apart with labeling and high impact graphics Our 8-color printing capability will help retailers sell out faster and re-order sooner! Move Product Faster and Build Brand Loyalty Printing helps move product. It builds brand recognition and makes your product stand out among others in the garden center. East Jordan Plastics can a o r ari ti s distincti. Cost-effective Process With Spectacular Results Our new digital print plate technology, combined with our 8-color print capability, offers you an economical alternative to other forms of high resolution printing and labeling. 8 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

SHUTTLE Brand Hanging Baskets, Planters & Injection Molded Pots The full featured quality injection molded SHUTTLE Brand Basket and SHUTTLE Brand Planter lines are all Made in the USA. Our 10, 11 and 12 Baskets have multiple hanging options; over the rim for automation (10 and 11 only), and double clip and wire hanger holes. 3-Strand Hangers available for the 10 and 11 baskets; 4-Strand Hangers available for the 12 basket. Tag slots integrated in rim. Our 10, 12 and 14 Planters have sturdy construction with heavy rims and sidewalls with bottom slots for use with industry standard saucers. Our new 8 (SPI800) and 10 (SPI1000) Injection Molded pots have strong rims that accept both hangers and our new cages. In combination with the cages, these containers work well for Poinsettia, Mum and Nursery crops that need plant support. Colors Available terracotta black green white mocha speckled mocha chocolate SHUTTLE Brand Hanging Baskets & Accessories SHB 1000 STD SHB 1000 PRM SHB 1100 STD SHB 1290 PRM BH 1575 BH 1875 BH 2250 BH 21 WIRE BH 24 WIRE HBD 750 www.eastjordanplastics.com 9

SHUTTLE Brand Hanging Baskets, Planters & Injection Molded Pots SHUTTLE Brand Planters SPP 1000 SPP 1200 SPP 1400 SHUTTLE Brand Injecton Molded Pots SPI 800 SPI 1000 10 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Liquid Volume Packaging Item Description Diameter Height Cubic Inches U.S. Metric Carton Pallet SHB 1000 STD 10 Standard Hanging Basket 9 (ID); 10 (OD) 5 7/8 305.1 cu in 1.32 gal 5.0 liters 100 1,900 or 32 CS SHB 1000 PRM 10 Premium Hanging Basket 9 (ID); 10 (OD) 6 5/8 347.8 cu in 1.51 gal 5.7 liters 100 1,548 or 26 CS SHB 1100 STD* 11 Standard Hanging Basket 10 (ID); 10 3/4 (OD) 6 3/8 360.0 cu in 1.57 gal 5.9 liters 100 1,312 or 24 CS SHB 1290 PRM 12 Premium Hanging Basket 12 (ID); 12 7/8 (OD) 7 580.0 cu in 2.50 gal 9.5 liters 100 1,032 or 12 CS SPI 800 8 Injection Molded ShuttlePot 7 5/16 (ID); 8 (OD) 6 1/2 231.0 cu in 1.00 gal 5.7 liters 100 3,400 SPI 1000 10 Injection Molded ShuttlePot 9 3/16 (ID); 10 (OD) 7 3/4 346.0 cu in 1.50 gal 8.5 liters 100 1,980 or 32 CS SPP 1000 10 Planter 10 (ID); 11 (OD) 7 3/4 436.9 cu in 1.89 gal 7.2 liters 100 1,056 or 20 CS SPP 1200 12 Planter 10 3/4 (ID); 12 (OD) 9 1/8 610.2 cu in 2.65 gal 10.0 liters 100 896 or 18 CS SPP 1400 14 Planter 14 (ID); 15 (OD) 11 3/8 1270.0 cu in 5.50 gal 20.8 liters 25 400 or 27 CS HBD 750 7.5 Drainage Disk 7.5 N/A N/A N/A N/A 1,560 20 CS BH 1575 1575 3-Strand Plastic Hanger N/A N/A N/A N/A N/A 600 12 CS BH 1875 1875 3-Strand Plastic Hanger N/A N/A N/A N/A N/A 600 12 CS BH 2250 2250 4-Strand Plastic Hanger N/A N/A N/A N/A N/A 300 12 CS BH 21 WIRE 21 3-Strand Wire Hanger N/A N/A N/A N/A N/A 500 40 CS BH 24 WIRE 24 4-Strand Wire Hanger N/A N/A N/A N/A N/A 250 40 CS * Matte finish available www.eastjordanplastics.com 11

SHUTTLE POT Brand Flower Pots With sturdy rims and shoulders for quick de-nesting and dispensing, not to mention extra strength and stability, we ve designed our SHUTTLE POT brand flower pots to move more plants, more quickly. Our co-extruded pots feature a dark inner layer that prevents light from harming delicate roots. Our Dual-level drain holes and footed bottom design facilitate better drainage and a smooth, seamless finish facilitates easy plant removal. While outside, a boldly colored exterior adapts easily to both printing (round pots only) and labeling for that extra edge that can create flyoff- the-shelf sales appeal. Colors Available terracotta black green white Custom colors available, contact us for a quote. SP 350 SP 400 SP 400 TS SP 400D TS SP 433 SP 433XP SP 433D SP433D TS SP 450 SP 470L SP 470 SP 470 TS 12 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

SP 470D SP 500 QL SP 500 QD SP 525 SP 525D SP 550 SP 600 SP 600D SP 600 DS SP 630 ** SP 630 TS SP 650 SP 670 SP 750** SP 750 TS SP 750D SP 800MP SP 800A www.eastjordanplastics.com 13

SHUTTLE POT Brand Flower Pots SP 850D** SP 850D TS SP 900 SP 1000 SP 350 3 1/2 3.50 3.38 22.3 cu in 12.3 fl oz 365 ml 1,950 28,620 SP 400 4 Pint Extended Print Side 4.00 3.50 28.9 cu in 1.00 pt 473 ml 1,800 22,230 SP 400 TS* 4 Pint Extended Print Side w/ Tag Slots 4.00 3.50 28.9 cu in 1.00 pt 473 ml 1,800 22,230 SP 400D TS* 4 Deep Extended Print Side w/ Tag Slots 4.00 4.5 39.9 cu in 1.38 pt 655 ml 1,500 22,230 SP 433 4 1/3 7 Degree Taper 4.33 3.75 36.3 cu in 1.25 pt 594 ml 1,100 17,340 SP 433 XP* 4 1/3 5 Degree Taper 4.33 3.75 38.4 cu in 1.33 pt 629 ml 1,040 17,340 SP 433D 4 1/3 Deep 4.33 5.125 49.6 cu in 1.71 pt 813 ml 1,040 16,830 SP 433D TS* 4 1/3 Deep w/ Tag Slots 4.33 5.125 49.6 cu in 1.71 pt 813 ml 840 13,464 SP 450 4 1/2 4.50 3.75 41.2 cu in 1.42 pt 675 ml 1,000 14,400 SP 470L* 4 7/10 Low 4.70 4.0 49.8 cu in 1.72 pt 816 ml 800 12,000 SP 470 4 7/10 Quart 4.70 4.50 57.7 cu in 1.00 qt 946 ml 800 12,000 SP 470 TS* 4 7/10 Quart w/ Tag Slots 4.70 4.50 57.7 cu in 1.00 qt 946 ml 800 12,000 SP 470D 4 7/10 QT Deep 4.70 5.00 61.2 cu in 1.06 qt 1.0 L 800 12,000 SP 500 QL 5 Quart Low 5.00 3.63 57.7 cu in 1.0 qt 946 ml 900 12,480 SP 500 QD 5 Quart Deep 5.00 4.50 61.0 cu in 1.05 qt 1.0 liters 900 12,480 SP 525 5 1/4 5.25 4.50 72.0 cu in 1.25 qt 1.18 liters 720 8,820 SP 525D 5 1/4 Deep 5.25 6.25 97.0 cu in 1.68 qt 1.59 liters 480 7,245 SP 550 5 1/2 (Texas 6) 5.50 4.50 72.0 cu in 1.25 qt 1.18 liters 720 8,400 SP 600 6 6.00 4.50 86.7 cu in 1.50 qt 1.42 liters 680 8,320 SP 600D 6 Deep 6.00 5.44 97.0 cu in 1.68 qt 1.59 liters 680 8,320 SP 600 DS* 6 Deep Standard 6.00 5.50 108.0 cu in 1.86 qt 1.77 liters 680 7,140 SP 630 6 1/3 Trade Gallon 6.30 6.375 144.4 cu in 2.5 qt 2.37 liters 270 5,500 SP 630 TS 6 1/3 Trade Gallon w/ Tag Slots 6.30 6.375 144.4 cu in 2.5 qt 2.37 liters 270 5,500 SP 650 6 1/2 6.50 5.00 115.3 cu in 2.00 qt 1.89 liters 300 5,460 SP 670 6 7/10 Trade Gallon 6.70 5.875 155.0 cu in 2.68 qt 2.54 liters 240 4,620 SP 750 7 1/2 7.50 5.625 173.3 cu in 3.00 qt 2.84 liters 240 3,750 SP 750 TS 7 1/2 w/ Tag Slots 7.50 5.625 173.3 cu in 3.00 qt 2.84 liters 240 3,750 SP 750D 7 1/2 Deep 7.50 7.00 230.7 cu in 4.0 qt 3.78 liters 210 3,450 SP 800MP 8 Mum 8.00 5.00 183.7 cu in 3.18 qt 3.01 liters 240 3,360 SP 800A 8 Azalea 8.00 6.00 204.4 cu in 3.54 qt 3.35 liters 210 3,360 SP 850D 8.5 Trade 2 Gallon 8.50 8.50 349.7 cu in 1.51 gal 5.73 liters 180 2,880 SP 850D TS 8.5 Trade 2 Gallon w/ Tag Slots 8.50 8.50 349.7 cu in 1.51 gal 5.73 liters 180 2,880 SP 900 9 9.00 6.25 291.0 cu in 1.26 gal 4.77 liters 140 2,530 SP 1000 10 Azalea 10.00 7.25 424.7 cu in 1.84 gal 6.96 liters 120 1,900 Key: A = Azalea; D = Deep; L = Low; MP = Mum Pan; QL = Quart Low; QD = Quart Deep NOTE: Bulk Pallet Quantities are Half Pallets * Special order item-minimum order requirements apply ** Tag Slot pots may be substituted for Non-Tag Slot pots at EJP discretion. 14 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Plant Ring PR-650/700 PR-750/800 PR-1000 PR-650/700 Plant Ring for 6 to 7 pots 7 3 3/4 1,250 24 CS PR-750/800 Plant Ring for 7 ½ to 8 ½ pots 8 4 1/4 1,250 24 CS PR-1000 Plant Ring for 10 Pots 10 5 1/4 500 40 CS Pot Cages SPI CAGE 6 SPI CAGE 8 SPI CAGE 10 SPI CAGE 6 6 Cage for SP600 / SP600D / SP600DS 6 4 TBD TBD SPI CAGE 8 8 Cage for SPI 8 Injection Molded Pot 8 4 13/16 TBD TBD SPI CAGE 10 10 Cage for SPI 10 Injection Molded Pot 10 5 11/16 TBD TBD www.eastjordanplastics.com 15

SHUTTLE TRAY Brand Flower Trays Worry-free shipment combines with fast and easy sales setup not to mention the encouragement of multi-pot sales! Our sturdy SHUTTLE TRAY brand flower trays and pot carriers anchor pots securely during transport from bench to rack to truck. The unique design makes it impossible for soil to fall between the growing pots. Multi-compartment plant trays facilitate fast display breakdown and setup, as well as attractive spacing of large-canopied crops. In addition, multiple holes ensure adequate drainage. East Jordan Plastics is the only source for SHUTTLE TRAY brand flower trays. ST 3-12 ST 350-6P STL 350-10 ST 350-11 OS STG 350-12 WMB STG 350-12 ES TS ST 350-18 STB 400-6 P STB 400-6 V P STK 400XP - 10 WMP STK 400-10 CB STK 400-10 ES STK 400D - 10 ST 400-12 ST 400-14 ST 400-15 ST 425-8 STT 433-8 16 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

ST 433-8 ST 433-10 ST 433-15 ST 433D - 8 ST 433D - 10 STB 450-6 ST 450-8 ST 450-10 ST 450-10 OS V ST 450-12 ST 450-15 ST 470L - 8 ST 470L - 10 ST 470L - 12 WMP STT 470-8 ST 470-8 ST 470-10 ST 470-12 www.eastjordanplastics.com 17

SHUTTLE TRAY Brand Flower Trays STY 470-8 OS ST 470D - 8 TS STY 470D - 8 OS TS STT 500QTL - 8 STT 500QTD - 8 ST 525-8 ST 525D - 8 STT 550-6 OS ST 550-6 ST 550-8 ST 600-3 ST 600-6 (R) ST 600D-6 ST 630-3 ST 630-6 ST 650-6 ST 670-6 Low ST 670-6 High ST 750-3 18 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

ST 3-12* 3-12 Pack 9 1/4 12 1/8 200 5,400 ST 350-6 P* 3 1/2-6 Pack Punched 4 7 10 1/2 200 7,700 STL 350-10* 3 1/2-10 Pack Offset 7 1/2 20 100 4,200 ST 350-11 OS* 3 1/2-11 Pack Offset 10 14 3/4 100 4,800 STG 350-12 WMB* 3 1/2-12 Pack 7 21 100 3,900 STG 350-12 ES TS* 3 1/2-12 Pack w/ Tag Slot 7 21 100 4,550 ST 350-18 3 1/2-18 Pack 10 5/8 21 100 2,800 STB 400-6 P 4-6 Pack w/ Handle Holes Punched 4 8 12 1/8 N/A 7,425 STB 400-6 V P 4-6 Pack Vented Punched 8 12 1/8 N/A 7,425 STK 400XP - 10 WMP 4-10 Pack Punched 4 8 20 100 3,300 STK 400-10 CB* 4-10 Pack Continuous Bottom 8 20 100 4,000 STK 400-10 ES 4-10 Pack Exposed Side 8 20 100 3,300 STK 400D - 10* 4-10 Deep Pack Exposed Side 8 20 100 3,850 ST 400-12 4-12 Pack 12 16 100 3,000 ST 400-14 4-14 Pack 10 5/8 21 1/8 100 2,800 ST 400-15 4-15 Pack 12 20 1/4 100 2,450 ST 425-8* 4 1/4-8 Pack Spacer 10 5/8 21 100 2,800 STT 433-8 4 1/3-8 Pack Spacer 10 20 100 3,600 ST 433-8 4 1/3-8 Pack 8 1/2 17 100 5,000 ST 433-10 4 1/3-10 Pack 8 5/8 21 5/8 100 4,000 ST 433-15 4 1/3-15 Pack 12 3/8 21 3/4 50 2,100 ST 433D - 8 4 1/3 Deep - 8 Pack 8 1/2 17 100 3,750 ST 433D - 10 4 1/3 Deep - 10 Pack 8 5/8 21 5/8 100 3,000 STB 450-6* 4 1/2-6 Pack w/ Handle Holes 9 13 5/8 200 7,500 ST 450-8 4 1/2-8 Spacer Pack 10 1/2 21 100 2,800 ST 450-10 4 1/2-10 Pack 8 11/16 22 3/8 100 3,000 ST 450-10 OS V 4 1/2-10 Pack Offset Vented 10 7/8 21 1/4 100 2,800 ST 450-12 4 1/2-12 Pack 13 5/16 17 3/4 100 2,625 ST 450-15 4 1/2-15 Pack 13 5/8 22 1/2 50 1,800 ST 470L - 8 4 7/10 Quart Low - 8 Pack 9 5/8 19 50 2,250 ST 470L - 10 4 7/10 Quart Low - 10 Pack 9 1/2 23 1/2 100 2,700 ST 470L - 12 WMP* 4 7/10 Quart Low - 12 Pack Punched 4 14 1/4 18 7/8 50 1,800 STT 470-8 4 7/10 8 Pack Spacer 10 20 100 3,600 ST 470-8 4 7/10 Quart - 8 Pack 9 5/8 19 50 2,250 ST 470-10 4 7/10 Quart - 10 Pack 9 1/2 23 1/2 100 2,700 ST 470-12 4 7/10 Quart - 12 Pack 14 1/4 18 7/8 50 1,800 STY 470-8 OS 4 7/10 Quart - 8 Pack Offset 8 1/2 21 100 3,500 ST 470D - 8 TS 4 7/10 Deep Quart - 8 Pack w/ Tag Slot 4 9 5/8 19 50 2,700 STY 470D - 8 OS TS 4 7/10 Deep Quart - 8 Pack Offset w/ Tag Slot 8 1/2 21 100 3,500 STT 500QTL - 8 5 Quart Low - 8 Pack 10 20 100 3,600 STT 500QTD - 8 5 QT Deep - 8 Pack 10 20 100 2,700 ST 525-8 5 1/4-8 Pack 10 5/8 21 50 2,240 ST 525D - 8* 5 1/4 Deep - 8 Pack 10 5/8 21 50 2,000 STT 550-6 OS 5 1/2-6 Pack Offset 10 20 100 2,700 ST 550-6 5 1/2-6 Pack 11 16.5 100 3,000 ST 550-8 5 1/2-8 Pack For Texas 6 11 22 100 2,400 ST 600-3 6-3 Pack 6 18 100 4,900 ST 600-6 (R) 6-6 Pack 12 18 100 3,150 ST 600D - 6 6-6 Deep Pack N/A N/A N/A N/A ST 630-3 6 1/3-3 Pack 6 5/8 19 3/4 50 3,250 ST 630-6 6 1/3-6 Pack 12 5/8 19 50 1,750 ST 650-6 6 1/2-6 Pack 13 1/8 19 3/4 50 1,800 ST 670-6 Low* 6 7/10 Trade Gal 6 Pack - Low 13 1/8 19 3/4 50 1,800 ST 670-6 High 6 7/10 Trade Gal 6 Pack - High 13 1/8 19 3/4 50 1,800 ST 750-3 7 1/2-3 Pack 7 1/2 22 1/2 100 3,000 Key: CB = Continuous Bottom; D = Deep; ES = Extended Side; L = Low; OS = Offset; P = Punched; PP = Polypropylene; TS = Tag Slot; V = Vented; XP = Extended Print Side * Special order item-minimum order requirements apply www.eastjordanplastics.com 19

SHUTTLE Brand Squares and Pot Carriers SHUTTLE Brand Squares Like our SHUTTLE POT brand flower pots, our SHUTTLE brand squares are designed to withstand whatever the grower world dishes out. They have the same strong rims and sturdy shoulders for quick de-nesting and trouble-free use in automated systems, a smooth, seamless finish to make plant removal a snap, and can be labeled. Colors Available terracotta black green Custom colors available, contact us for a quote SS 265 SS 325 SS 400 Deep TS SS 450 SS 450 Deep SS 600 SS 265 2 5/8 2.60 3.25 13.7 cu in 7.58 fl oz 224.5 ml 2,430 26,100 SS 325 3 1/4 Pint 3.25 4.00 28.9 cu in 1.00 pt 473 ml 1,800 20,280 SS 400 Deep TS 4 Deep Square 4 5 1/2 57.7 cu in 1.0 qt 946 ml 850 10,800 SS 450 4 1/2 4.15 3.625 46.9 cu in 1.62 pt 770 ml 750 9,000 SS 450 Deep 4 1/2 Deep 4.15 4.50 57.7 cu in 1.00 qt 946 ml 750 9,000 SS 600 5 5.00 4.57 72.0 cu in 1.25 qt 1.18 l 720 7,920 *Only Black, Green, and Terracotta are available. NOTE: Bulk Pallet Quantities are Half Pallets Press Fit Squares A Square T Square A Square A 4 Press Fit Square Pot 3.50 3.50 29.5 cu in 1.02 pt 483.4 ml 900 20 CS T Square T 4 Press Fit Square Pot 3.25 3.50 26.5 cu in 14.70 fl oz 434.3 ml 900 20 CS 20 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Pot Carriers for SHUTTLE Brand Squares PC SS 265-32 PC SS 325PP - 12 PC SS 325PP - 18 PC SS 325PP - 20 PC SS 400D - 10 WMB PC SS 450-10 PC SS 450-15 PC SS 600-8 PC SS 265-32 SS 265-32 Pack 10 7/8 21 1/4 100 3,200 PC SS 325PP - 12 SS 325PP - 12 Pack 6 2/3 19 3/4 100 4,550 PC SS 325PP - 18 SS 325PP - 18 Pack 10 20 100 3,150 PC SS 325PP - 20 SS 325PP - 20 Pack 13 16 1/4 100 2,700 PC SS 400D - 10 WMB SS 400 Deep - 10 Pack 8 20 100 4,400 PC SS 450-10 SS 450-10 Pack 8 1/2 2 1 100 3,500 PC SS 450-15 SS 450-15 Pack 12 1/2 21 50 2,100 PC SS 600-8 SS 600-8 Pack 10 20 100 3,600 www.eastjordanplastics.com 21

SHUTTLE Brand Squares and Pot Carriers Specialty Pot Carriers AF 3 1/2 PC STD AF 4 1/2 PC HD V AF 4 1/2 PCT STD V AF 4 1/2 PWT HD PC 670-6 PC 800-2 AF 3 1/2 PC STD 3 1/2 Pot Carrier Standard 10 7/8 21 1/4 100 3,200 AF 4 1/2 PC HD V 4 1/2 Pot Carrier Heavy Duty Vented 10 7/8 21 1/4 100 2,800 AF 4 1/2 PCT STD V 4 1/2 Plant Carrying Tray Standard Vented 10 7/8 21 1/4 100 3,200 AF 4 1/2 PWT HD 4 1/2 Plant Watering Tray Heavy Duty 10 7/8 21 1/4 100 2,800 PC 670-6* 6 7/10-6 Pack N/A N/A 50 1,800 PC 800-2* 8-2 Pack 8 20 100 3,300 4 1/2 PCT: round only. 4 1/2 PC:PWT: round or square. * Special order item-minimum order requirements apply Press Fit Trays EF 4-12 PFT GF 4-12 PFT TF 4-18 PFT AF 4-18 PFT Packaging Item Description Width Length Carton Pallet EF 4-12 PFT * E4-12 Pack 6 2/3 19 3/4 150 100 5,850 GF 4-12 PFT G4-12 Pack 7 21 150 5,400 TF 4-18 PFT T4-18 Pack 10 20 100 3,600 AF 4-18 PFT A4-18 Pack 10 7/8 21 1/4 100 3,200 EF compatible with T4", GF compatible with A4" * Special order item-minimum order requirements apply 22 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Plug and Propagation Trays Plug Trays Our plug and propagation trays are precision-engineered to exact tolerances. Whether you need to hand-stick rooted cuttings, or sow millions of seeds using the latest automated equipment, we can offer you the levels of consistent precision and repeatable performance you need. At EJP, our trays: Include round, square, hexagonal, and octagonal cells, vented and non-vented designs Include common element (CE), endless-thermoformed, vented or non-vented, precision punched, precision trimmed and soil saver version features Have uniform wall thickness that provides strong corners and bottoms Are designed for easy de-nesting PT 12E Circular 3 Vented PTA 36 Square 3 1/4 Vented PTT 50 Square 1 5/8 Vented PTT 50 Square 2 5/8 Vented PTT 50 Square 2 5/8 LC PT 50 Square 3 Strawberry PTA 58 Square OS 2 3/8 Vented PTT 72 Circular 2 PTT 72 Square 2 PTT 72 Circular LC 2 Vented PTA 72 Square 2 Vented PTA 72 Square 2 3/8 Vented www.eastjordanplastics.com 23

Plug and Propagation Trays PTT 84 Circular 1 1/2 Vented PTT 84 Square 1 5/8 Vented PTT 98 Circular 1 5/8 Vented PT 102 (2x51) Hex Uncut 1 5/8 Vented PT 102 (2x51) Hex Strip 1 5/8 Vented PT 105 Hexagonal 1 1/2 Vented PT 128 NV 1 3/8 PT 128 Square 1 7/8 PT 128E Octagonal 1 1/2 Vented PT 144 Octagonal 1 1/2 Vented PTT 200 Square 1 1/4 PT 200 Square 1 3/4 PT 288 Square 1 PT 288 Square Deep Medium 1 1/4 PT 288 Square Deep 1 5/8 24 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

PT 288 Octagonal 1 3/16 Vented PT 338 Square 1 1/2 PT 392 Square 1 PT 406 Square 1 PT 512 Square 1 PT 512 Square 1 Vented PT 12E Circular 3 Vented 7 1/3 x 21 6 x 2 3 3 2/5 2 9/10 3/8 24.3 291.6 13.4 398 100 3,000 PTA 36 Square 3 1/4 Vented 10 7/8 x 21 º 4 x 9 3 1/4 1 15/16 1 5/8 7.62 274.3 4.22 124.8 100 3,200 PTT 50 Square 1 5/8 Vented 10 x 20 10 x 5 1 5/8 1 1/2 1 3/16 11/16 2.86 143 1.58 46.8 100 2,340 PTT 50 Square 2 5/8 Vented 10 x 20 10 x 5 2 5/8 1 1/2 15/16 11/16 4 200 2.21 65.5 100 2,160 PTT 50 Square 2 5/8 LC 10 x 20 5 x 10 2 5/8 1 13/16 1 5/16 5/8 6.5 325 3.6 106.5 100 2,700 PT 50 Square 3 Strawberry 11 1/8 x 21 10 x 5 3 1 7/8 1/2 3/8 4.66 233 2.58 76.3 100 3,840 PTA 58 Square OS 2 3/8 Vented 10 7/8 x 21 1/4 5 x 11&12 2 3/8 1 7/16 3/4 3/8 2.92 169.3 1.61 47.8 100 3,600 PTT 72 Circular 2 10 x 20 12 x 6 2 1 1/4 5/8 3/8 1 72 0.55 16.4 100 3,600 PTT 72 Square 2 10 x 20 12 x 6 2 1 1/4 5/8 3/8 1.76 126.7 0.97 28.8 100 3,600 PTT 72 Circular LC 2 Vented 10 x 20 6 x 12 2 1 1/2 1 3/8 2.5 180 1.38 40.9 100 2,800 PTA 72 Square 2 Vented 10 7/8 x 21 1/4 6 x 12 2 1 1/2 15/16 3/8 2.79 200.9 1.54 45.7 100 4,320 PTA 72 Square 2 3/8 Vented 10 7/8 x 21 1/4 6 x 12 2 3/8 1 1/2 13/16 3/8 3.31 238.3 1.83 54.3 100 2,560 PTT 84 Circular 1 1/2 Vented 10 x 20 12 x 7 1 1/2 1 1/16 11/16 3/8 1.27 106.7 0.7 20.8 100 3,600 PTT 84 Square 1 5/8 Vented 10 x 20 12 x 7 1 5/8 1 1/16 11/16 1/2 1.22 102.4 0.67 20 100 3,600 PTT 98 Circular 1 5/8 Vented 10 x 20 7 x 14 1 5/8 1 5/16 15/16 3/8 1.62 158.7 0.9 26.5 100 3,600 PT 102 (2x51) Hex Uncut 1 5/8 Vented 10 1/4 x 20 5/8 17 x 6 1 5/8 1 1/4 13/16 3/8 1.23 125.4 0.68 20.2 100 1,760 PT 102 (2x51) Hex Strip 1 5/8 Vented 10 1/4 x 20 5/8 17 x 3 1 5/8 1 1/4 13/16 3/8 1.22 125.5 0.68 20.2 100 1,760 PT 105 Hexagonal 1 1/2 Vented 11 1/8 x 21 15 x 7 1 1/2 1 1/4 7/8 1/2 1.5 157.5 0.83 24.5 100 1,920 PT 128 Square NV 1 3/8 10 13/20 x 20 2/5 16 x 8 1 3/8 1 3/20 9/16 0.375 1.25 160 0.69 20.5 100 2,400 PT 128 Square 1 7/8 10 5/8 x 20 3/8 16 x 8 1 7/8 1 1/8 9/16 3/8 1.51 193.3 0.83 24.7 100 2,400 PT 128E Octagonal 1 1/2 Vented 10 7/8 x 20 1/4 8 x 16 1 1/2 1 1/4 15/16 3/8 1.33 170.2 0.74 21.8 100 3,200 PT 144 Octagonal 1 1/2 Vented 11 1/8 x 21 18 x 8 1 1/2 1 1/16 11/16 3/8 1 144 0.55 16.3 100 2,400 PTT 200 Square 1 1/4 10 x 20 20 x 10 1 1/4 7/8 9/16 0.312 0.59 118 0.32 9.6 100 2,520 PT 200 Square 1 3/4 11 1/8 x 21 20 x 10 1 3/4 15/16 1/2 0.312 0.89 178 0.49 14.6 100 3,840 PT 288 Square 1 11 1/8 x 21 24 x 12 1 3/4 5/8 0.312 0.45 129.6 0.24 7.4 100 2,240 PT 288 Square Deep Medium 1 1/4 11 1/8 x 21 24 x 12 1 1/4 3/4 7/16 0.312 0.51 146.8 0.28 8.4 100 2,240 PT 288 Square Deep 1 5/8 11 1/8 x 21 24 x 12 1 5/8 3/4 7/16 0.312 0.59 170 0.32 9.6 100 1,760 PT 288 Octagonal 1 3/16 Vented 11 1/8 x 21 24 x 12 1 3/16 13/16 1/2 0.312 0.43 123.8 0.23 7 100 2,400 PT 338 Square 1 1/2 11 1/8 x 21 26 x 13 1 1/2 3/4 11/16 0.25 0.41 138.5 0.22 6.7 50 1,920 or 2,880 PT 392 Square 1 11 1/8 x 21 28 x 14 1 11/16 7/16 0.312 0.3 117.6 0.16 4.9 100 2,240 PT 406 Square 1 11 1/8 x 21 29 x 14 1 5/8 3/8 0.312 0.29 117 0.15 4.7 100 2,240 PT 512 Square 1 11 1/8 x 21 32 x 16 1 9/16 7/16 0.312 0.22 112 0.12 3.6 100 2,240 PT 512 Square 1 Vented 11 1/8 x 21 32 x 16 1 9/16 7/16 0.312 0.22 112 0.12 3.6 100 2,240 Key: CE = Common Element; D = Deep; IM = Injection Molded; LC = Large Cell; NV = Non-vented; S = Soil Saver; V = Vented; VS = Vented Soil Saver www.eastjordanplastics.com 25

Plug and Propagation Trays CE Endless Plug Trays PT 288 CE NV 1 PT288 CE SS FV 1 PT 288 CE IM 1 PT 512 CE NV 15/16 PT 512 CE V 15/16 PT 512 CE VS 15/16 PT 288 CE NV 1 10 5/8 x 20 3/8 24 x 12 1 3/4 9/16 0.343 0.41 118 0.22 6.7 100 2,240 PT 288 CE SS FV 1 10 5/8 x 20 3/8 24 x 12 1 3/4 9/16 0.343 0.38 109.4 0.2 6.2 100 2,800 PT 288 CE IM 1 V 10 1/4 x 20 1/2 24 x 12 1 11/16 1/2 0.343 0.33 95 0.18 5.4 100 1,692 PT 512 CE NV 15/16 10 5/8 x 20 3/8 32 x 16 15/16 9/16 7/16 0.312 0.24 122.8 0.13 3.9 100 2,880 PT 512 CE V 15/16 10 5/8 x 20 3/8 32 x 16 15/16 9/16 7/16 0.312 0.24 122.8 0.13 3.9 100 2,400 PT 512 CE VS 15/16 10 5/8 x 20 3/8 32 x 16 15/16 9/16 7/16 0.312 0.19 97.2 0.1 3.1 100 1,920 Key: CE = Common Element; D = Deep; IM = Injection Molded; LC = Large Cell; NV = Non-vented; S = Soil Saver; V = Vented; VS = Vented Soil Saver Germinating Trays AF-GH Germinating Half Flat TF-GH Germinating Half Flat AF Germinating Flat TF Germinating Flat 20 Row Seedling Tray AF-GH Germinating Half Flat 10 7/8 x 10 7/8 N/A 148 cu in 2.56 qt 2.42 l 1 1/4 200 5,600 TF-GH Germinating Half Flat* 10 x 10 N/A 127.6 cu in 2.21 qt 2.09 l 1 1/4 200 5,600 AF Germinating Flat 10 7/8 x 21 1/4 N/A 305 cu in 1.32 gal 5.0 l 1 1/2 100 2,800 TF Germinating Flat* 10 x 20 N/A 265.8 cu in 1.15 gal 4.35 l 1 1/2 100 3,600 20 Row Seedling Tray* 10 7/8 x 21 1/4 N/A 204 cu in 3.52 qt 3.34 l 1 1/4 100 48 CS * Special order item-minimum order requirements apply 26 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Landscape Market Trays By By combining combining a a flat flat and and a a pack pack in in one one super super sturdy sturdy tray, tray, our our Landscape Landscape Market Market Trays Trays offer offer greater greater efficiency efficiency at at less less cost cost for for today s today s growers. growers. A A variety variety of of configurations configurations and and sizes sizes to to choose choose from from for for different different price price points points and and excellent excellent sell sell through. through. AF 18-01 MT HMT 32-01 LF-HALF 9-01 MT WMB LF-HALF 12-01 MT LF-HALF 12-01 MTL LF 18-01 MT MT 12-01 MT 20-01 MT 24-01 V MT 32-01 SF 50-01 MT TF-HALF 12-01 MT TF-HALF 16-01 MT TF 18-01 MT AF 18-01 MT 10 7/8 x 21 1/4 3 sq x 3 1/4 27 15.1 fl oz 442 ml 486 2.1 gal 7.96 l 100 2,640 HMT 32-01 7 x 20 4 4 1 1/2 x 2 3/8 x 2 3/4 6.1 3.42 fl oz 101.5 ml 198.1 3.42 qt 3.24 l 100 3,600 LF-HALF 9-01 MT WMB 7 1/2 x 10 4 4 2 1/4 x 3 x 3 7/16 17.4 9.63 f l oz 285 ml 156.5 2.7 qt 2.56 l 200 7,200 LF-HALF 12-01 MT 7 1/2 x 10 4 4 2 1/5 x 2 1/10 x 3 1/4 11 6.1 fl oz 180.8 ml 132.5 2.3 qt 2.17 l 200 8,400 LF-HALF 12-01 MTL 7 1/2 x 10 4 4 2 1/5 x 2 1/10 x 3 3/4 12 6.6 fl oz 191.7 ml 142.4 2.46 qt 2.33 l 200 7,920 LF 18-01 MT 7 1/2 x 20 4 2 1/4 x 3 x 3 7/16 17.4 9.71 fl oz 287.2 ml 313 1.36 gal 5.17 l 100 3,600 MT 12-01 10 x 14 3/4 4 4 3 x 3 3/4 x 3 1/4 24.2 13.4 fl oz 396.5 ml 290.4 1.25 gal 4.75 l 100 3,600 MT 20-01* 12 x 16 1/4 3 x 3 x 3 1/4 20.1 11.1 fl oz 330 ml 402 1.73 gal 6.58 l 100 2,250 MT 24-01 V 10 x 14 3/4 4 4 2 3/16 sq x 3 1/4 11.13 6.17 fl oz 182.5 ml 267 1.15 gal 4.38 l 100 3,600 MT 32-01 10 x 14 3/4 4 4 1 11/16 x 2 9/16 x 2 13/16 8.77 4.85 fl oz 143.5 ml 280.6 1.21 gal 4.58 l 100 3,600 SF 50-01 MT 8 1/2 x 20 1 1/2 x 2 x 2 7/8 5.8 3.21 fl oz 95 ml 290 1.25 gal 4.75 l 100 3,500 TF-HALF 12-01 MT 10 x 10 4 4 2 5/16 x 3 1/8 x 3 1/2 19.25 10.7 fl oz 315.5 ml 230.7 1.0 gal 3.78 l 100 4,320 TF-HALF 16-01 MT* 10 x 10 4 4 2 3/8 x 2 3/8 x 3 1/4 11.3 6.25 oz 185 ml 180 3.12 qt 2.96 l 200 9,000 TF 18-01 MT 10 x 20 4 2 3/4 sq x 3 1/4 25.4 14 fl oz 416 ml 457 1.97 gal 7.48 l 100 3,150 * Special order item-minimum order requirements apply www.eastjordanplastics.com 27

Liner Sheets Our New 24 (LA 24) and 32 (LA 32) Liner Sheets are lighter than a Plug Tray but strong and flexible to handle both Perennial and Nursery liner crops. LA 24 LA 32 LA 24 24 2 5/16 x 3 1/8 x 3 15.3 8.5 fl oz 250 ml N/A N/A LA 32 32 2 1/2 x 2 1/2 x 3 10.7 5.9 fl oz 175 ml N/A N/A 28 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Sheet of Pots A 18-01H A 18-01EH T 18-01D T 18-01XD (Formerly known as T 18-01M) (Formerly known as T 18-01H) S 18-01H E 12-01H G 12-01H P 20-01M P 20-01H V 15-01H Y 10-01H A 18-01H 18 3 1/8 x 3 1/8 x 3 1/8 24.4 13.5 fl oz 399 ml 100 2,400 A18-01EH 18 3 1/8 x 3 1/8 x 3 7/16 N/A N/A N/A 100 2,400 or 28 CS T 18-01D 18 3 x 3 x 3 19.4 10.74 fl oz 317 ml 100 4,500 T 18-01XD 18 3 x 3 x 3 1/4 22.8 12.6 fl oz 373 ml 100 3,240 S18-01H 18 2 1/2 x 3 x 3 1/4 17.5 9.6 fl oz 286 ml 100 5,000 E 12-01H * 4 12 3 x 3 x 3 1/4 24 13.2 fl oz 393 ml 100 5,400 G 12-01H * 4 12 3 7/8 x 3 x 3 1/4 28.5 1.0 pt 473 ml 150 4,200 P 20-01M 20 3 x 3 x 3 19.6 10.87 fl oz 321 ml 100 6,000 P 20-01H 20 3 x 3 x 3 ½ 24.5 13.6 fl oz 401 ml 100 3,375 V 15-01H 15 3 4/5 x 3 4/5 x 3 1/2 40.5 1.40 pt 662 ml 100 3,150 Y 10-01H 4 10 3 3/4 x 3 3/4 x 4 1/8 43 1.48 pt 704 ml 100 3,200 *V 15-01H Sheet of Pots is compatible with PCSS 450-15 www.eastjordanplastics.com 29

Injection Molded Trays Our new injection molded trays are designed and manufactured for use on automated destacking, filling, transplanting and transport equipment. Made of 100% recycled Horticultural containers they are strong enough to be reused until ready to be recycled again. WL 7520 WL 12-7520 WS 8520 WT 1020 WT 1006 WM WA 1121 STD WA 1121 HD STI 630-6 TS STI TG - 6 TS WL 7520 L-Series Center Rib Web Flat 7 3/8 19 7/8 N/A 3,120 WL 12-7520 L-Series 12-01 Web Flat 7 1/2 19 9/10 N/A 1,728 WS 8520 S-Series Center Rib Web Flat 8 3/8 19 7/8 N/A 3,520 WT 1020 T-Series Open Web Flat 9 7/8 19 7/8 N/A 2,250 WT 1006 WM T-Series 10-06 Web Flat 9 7/8 19 7/8 N/A 2,520 WA 1121 STD A-Series Open Standard Web Flat 10 7/8 21 1/4 N/A 2,700 WA 1121 HD A-Series Open Heavy Duty Web Flat 10 7/8 21 1/4 N/A 2,700 STI 630-6 TS 6.3 Trade Gallon Injection Molded Tray with Tag Slot - 6 Pack 12 1/2 18 3/4 N/A 1,200 STI TG - 6 TS 16 cm & 17 cm Gallon Injection Molded Tray - 6 Pack 13 1/8 19 3/4 N/A 1,140 30 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

A Series Flats and Inserts A Series Flat (10 7/8 x 21 1/4 ) Our largest footprint flat and insert system, measuring 10 7/8 x 21 1/4. All A Series inserts have a variety of compatible A Series flats to meet any planting requirement, including Press-Fit square pots, and feature the following for greater efficiency and yield: Instant two-finger de-nesting, insert after insert Consistent cell thickness, producing uniform strength throughout the entire insert and preventing a paper-thin bottom Easy pack separation, due to clean and consistent trim with precise serrations Uniform drainage holes and channels for complete and even drainage of the cell SPECIAL NOTE: Some available in all guages. Check with your sales rep. AF Half Flat AF Open AF Open No Hole AF CRO AF 6 AF 8 AF 12 AF 12 OSR AF 12 SSR AF 18 AF Half Flat N/A N/A 200 4,000 N/A N/A AF Open 100 4,000 100 3,200 100 2,800 AF Open No Hole N/A N/A 100 N/A 100 2,800 AF CRO 100 4,000 100 3,200 100 2,800 AF 6 100 3,200 100 2,800 N/A N/A AF 8 100 4,000 100 3,200 100 2,800 AF 12 100 4,000 100 3,200 N/A N/A AF 12 OSR* 100 4,000 100 3,200 N/A N/A AF 12 SSR* 100 4,000 100 3,200 N/A N/A AF 18 100 4,000 100 3,200 N/A N/A Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply www.eastjordanplastics.com 31

A Series Flats and Inserts A Series Inserts (10 7/8 x 21 1/4 ) A 2-16 A 2-24 A 2-36 A 3-06 A 6-01 A 6-04 A 6-06 A 6-06H A 6-09 A 6-12 A 8-01 A 8-04 A 8-04H A 8-06 A 8-08 A 8-09 A 8-12 HD A 10-01 A 10-04 A 10-06 A 12-01 A 12-02 A 12-03 A 12-04 A 12-04S A 12-06 A 12-06S A 12-06H LS 32 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

A 14-01 A 18-01R A 18-01 A 18-01H A 18-01EH A 18-02 A 18-02R A 18-03R A 18-03T A 18-03TS A 18-04 A 18-04S A 24-01 A 36-01 HD A 48-01 HD www.eastjordanplastics.com 33

A Series Flats and Inserts A 2-16* 4 32 2 3/8 x 2 3/8 x 2 1/4 9 4.9 fl oz 160 ml 144 2.49 qt 2.35 l 100 4,000 A 2-24* 4 48 2 3/8 x 2 3/8 x 2 1/4 5.2 2.8 fl oz 85 ml 124.8 2.16 qt 2.04 l 200 4,800 A 2-36* 72 1 5/8 x 1 5/8 x 2 1/4 3 1.6 fl oz 49 ml 108 1.87 qt 1.76 l 200 4,800 A 3-06* 4 18 3 1/8 x 3 1/8 x 2 1/4 17.2 9.5 fl oz 281 ml 103.2 1.78 qt 1.69 l 200 4,800 A 6-01 4 6 4 3/4 x 6 9/16 x 2 1/4 61 1.05 qt 999 ml 61 1.05 qt 999 ml 200 4,800 A 6-04 4 24 2 1/4 x 3 1/16 x 2 1/4 11.5 6.3 fl oz 188 ml 46 1.59 pt 753 ml 200 4,800 A 6-06 4 36 2 1/4 x 2 x 2 1/4 7 3.8 fl oz 114 ml 42 1.45 pt 688 ml 200 4,800 A 6-06H 4 36 2 3/16 x 2 3/8 x 3 1/8 11.5 6.3 fl oz 188 ml 69 1.19 qt 1.13 l 100 3,840 A 6-09 4 54 1 1/2 x 2 1/8 x 2 1/4 4.3 2.3 fl oz 70 ml 38.7 1.34 pt 634 ml 200 4,800 A 6-12* 72 1 1/2 x 1 1/2 x 2 1/4 3 1.6 fl oz 49 ml 36 1.24 pt 589 ml 100 4,000 A 8-01 4 8 4 3/4 x 4 3/4 x 2 1/4 45 1.55 pt 737 ml 45 1.55 pt 737 ml 200 4,800 A 8-04 4 32 2 3/8 x 2 3/8 x 2 1/4 9 4.9 fl oz 147 ml 36 1.24 pt 589 ml 200 4,800 A 8-04H 4 32 2 3/8 x 2 3/8 x 3 1/8 13 7.2 fl oz 213 ml 52 1.80 pt 852 ml 100 3,840 A 8-06 48 1 1/2 x 2 3/8 x 2 1/4 5.2 2.8 fl oz 85 ml 31.2 1.07 pt 511 ml 200 4,800 A 8-08 4 64 1 1/8 x 2 3/8 x 2 1/4 3.9 2.1 fl oz 63 ml 31.2 1.07 pt 511 ml 200 4,800 A 8-09* 72 1 1/2 x 1 1/2 x 2 1/4 2.9 1.6 fl oz 47 ml 26.1 14.4 fl oz 427 ml 200 4,800 A 8-12 HD* 96 1 1/8 x 1 1/2 x 2 1/4 2.5 1.3 fl oz 40 ml 30 1.03 pt 491 ml 100 4,000 A 10-01 4 10 3 3/4 x 4 3/4 x 2 1/4 35.8 1.23 pt 586 ml 35.8 1.23 pt 586 ml 200 4,800 A 10-04 4 40 1 7/8 x 2 3/8 x 2 1/4 6.8 3.7 fl oz 111 ml 27.2 15.0 fl oz 445 ml 200 4,800 A 10-06 4 60 1 9/16 x 1 7/8 x 2 1/4 4 2.2 fl oz 65 ml 24 13.2 fl oz 393 ml 200 4,800 A 12-01 4 12 3 1/16 x 4 3/4 x 2 1/4 24.7 13.6 fl oz 404 ml 24.7 13.6 fl oz 404 ml 200 4,800 A 12-02 4 24 2 1/4 x 3 1/16 x 2 1/4 11.5 6.3 fl oz 188 ml 23 12.7 fl oz 376 ml 200 4,800 A 12-03 4 36 1 1/2 x 3 1/8 x 2 1/4 7.1 3.9 fl oz 116 ml 21.3 11.8 fl oz 349 ml 200 4,800 A 12-04 48 1 1/2 x 2 1/4 x 2 1/4 4.9 2.7 fl oz 80 ml 19.6 10.8 fl oz 321 ml 200 4,800 A 12-04S 4 48 1 1/2 x 2 1/4 x 2 1/4 5.5 3.0 fl oz 90 ml 22 12.1 fl oz 360 ml 200 4,800 A 12-06 72 1 1/2 x 1 1/2 x 2 1/4 3 1.6 fl oz 49 ml 18 9.9 fl oz 294 ml 200 4,800 A 12-06S 4 72 1 1/2 x 1 1/2 x 2 1/4 4 2.2 fl oz 65 ml 24 13.2 fl oz 393 ml 200 4,800 A 12-06H LS* 4 72 1 1/2 x 1 1/2 x 3 1/8 4.2 2.3 fl oz 68 ml 25.2 13.9 fl oz 412 ml 100 3,840 A 14-01* 4 14 2 9/16 x 4 3/4 x 2 1/4 21.3 11.7 fl oz 349 ml 21.3 11.7 fl oz 349 ml 200 4,800 A 18-01R* 18 2 x 4 7/8 x 2 1/4 15.5 8.5 fl oz 253 ml 15.5 8.5 fl oz 253 ml 100 4,000 A 18-01 18 3 1/8 x 3 1/8 x 2 1/4 17.2 9.5 fl oz 281 ml 17.2 9.5 fl oz 281 ml 200 4,800 A 18-01H 4 18 3 1/8 x 3 1/8 x 3 1/8 24.4 13.5 fl oz 399 ml 24.4 13.5 fl oz 399 ml 100 2,400 A 18-01EH 4 18 3 1/8 x 3 1/8 x 3 7/16 25.8 14.3 fl oz 422 ml N/A N/A N/A 100 2,400 or 28 CS A 18-02* 36 1 1/2 x 3 1/8 x 2 1/4 7.3 4.0 fl oz 119 ml 14.6 8.0 fl oz 239 ml 200 4,800 A 18-02R* 36 2 x 2 7/16 x 2 1/4 7.2 3.9 fl oz 117 ml 14.4 7.9 fl oz 235 ml 200 4,800 A 18-03R* 54 2 x 1 5/8 x 2 1/4 4.6 2.5 fl oz 75 ml 13.8 7.6 fl oz 226 ml 200 4,800 A 18-03T* 54 3 cells 2 1/4 deep 4.5 2.4 fl oz 73 ml 13.5 7.4 fl oz 221 ml 200 4,800 A 18-03TS* 54 3 semi cells 2 1/4 deep 5.1 2.8 fl oz 83 ml 15.3 8.4 fl oz 248 ml 100 4,000 A 18-04 72 1 1/2 x 1 1/2 x 2 1/4 2.9 1.6 fl oz 47 ml 11.6 6.4 fl oz 190 ml 200 4,800 A 18-04S* 72 1 3/8 x 1 3/8 x 2 1/4 3.2 1.7 fl oz 52 ml 12.8 7.0 fl oz 209 ml 200 4,800 A 24-01 24 2 1/4 x 3 1/16 x 2 1/4 11.5 6.3 fl oz 188 ml 11.5 6.3 fl oz 188 ml 200 4,800 A 36-01 HD* 36 2 1/4 x 2 x 2 1/4 6.9 3.8 fl oz 113 ml 6.9 3.8 fl oz 113 ml 100 4,000 A 48-01 HD 48 2 1/4 x 1 7/16 x 2 1/4 4.6 2.5 fl oz 75 ml 4.6 2.5 fl oz 75 ml 100 4,000 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 34 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

T Series Flats and Inserts T Series Flat (10 x 20 ) T Series, or true flats and inserts, utilize a space-saving 10 x 20 footprint. However, they have virtually the same soil volume as the A Series insert, because the T Series inserts are a full 3/8 deeper. The result is more flats per bench, cart, truck and retail facing. Using attention-grabbing tags in the built-in tag slot is an excellent way to display information to the retail customer or highlight programs SPECIAL NOTE: Some available in all guages. Check with your sales rep. TF Half Flat TF Open TF CRO TF 3 TF 3-16 TF 6 TF 6 HR TF 8 TF 10 www.eastjordanplastics.com 35

T Series Flats and Inserts TF-10-06 WM TF 12 TF 12 OSR TF 18 TF 18 SCR TT18-01* (Formerly known as PCSS325-18) * T18-01D & T18-01XD are compatible with the TT18-01 TF Half Flat N/A N/A 200 6,300 N/A N/A TF Open 100 4,500 100 4,050 N/A N/A TF CRO 100 4,500 100 4,050 N/A N/A TF 3 100 4,500 N/A N/A N/A N/A TF 3-16* 100 4,500 N/A N/A N/A N/A TF 6 100 4,500 100 4,050 N/A N/A TF 6 HR 100 4,500 100 4,050 N/A N/A TF 8 100 4,500 100 4,050 N/A N/A TF 10 100 4,500 100 4,050 N/A N/A TF 10-06 WM 100 4,140 N/A N/A N/A N/A TF 12 100 4,500 100 4,050 N/A N/A TF 12 OSR 100 4,500 100 4,050 N/A N/A TF 18 100 4,500 100 4,050 N/A N/A TF 18 SCR 100 4,500 100 4,050 N/A N/A TT 18-01 100 3,600 N/A N/A N/A N/A Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 36 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

T Series Inserts (10 x 20 ) T 2-09H T 2-16 T 2-24H LS T 3-06H SQ T 3-06 Super Pk (3pk per tray) T 3-16H LS T 4-08 T 4-12H LS T 6-06H T 6-06H LS T 6-06H SS T 8-04 T 8-04H T 8-04EH T 8-06 T 8-06 SCC T 8-06H LS T 9-06H LS T 10-04 T 10-06H LS T 10-06EH LS T 12-01 T 12-03 T 12-04 T 12-04S T 12-04SS T 12-04H LS T 12-06H LS T 18-01 T 18-01D T 18-01XD T 18-01R (Formerly known as T 18-01M) (Formerly known as T 18-01H) www.eastjordanplastics.com 37

T Series Flats and Inserts T 18-02 T 18-02R T 18-03RH T 18-03R T 18-03RS * Black Dots = Handle Hole Placement T 18-03T T 18-03TS T 2-09H* 4 4 18 3 x 3 x 3 1/4 22.8 12.6 fl oz 373 ml 205.2 3.54 qt 3.35 l 100 3,240 T 2-16* 32 2 5/16 x 2 5/16 x 2 5/8 9.8 5.4 fl oz 160 ml 156.8 2.71 qt 2.56 l 200 5,400 T 2-24H LS* 4 4 48 2 5/16 x 2 5/16 x 3 1/4 5.8 3.2 fl oz 95 ml 139.2 2.41 qt 2.28 l 100 3,600 T 3-06H SQ 4 4 18 2 15/16 x 3 11/16 x 3 1/4 21.9 12.1 fl oz 360 ml 131.4 2.25 qt 2.16 l 100 4,860 T 3-06 Super Pk (3pk per tray)* 4 6 9 3/4 x 6 1/2 17.3 9.5 fl oz 283 ml 103.8 1.79 qt 1.70 l 300 12,960 T 3-16H LS 4 4 48 2 7/16 x 1 9/16 x 3 1/2 7.5 4.1 fl oz 122 ml 120.2 2.07 qt 1.97 l 100 3,780 T 4-08 32 2 5/16 x 2 5/16 x 2 5/8 9.8 5.4 fl oz 160 ml 78.4 1.35 qt 1.28 l 200 5,400 T 4-12H LS 4 48 2 5/16 x 2 5/16 x 3 1/4 5.8 3.2 fl oz 95 ml 69.6 1.20 qt 1.14 l 100 4,500 T 6-06H 4 36 2 1/8 x 2 5/16 x 3 1/4 11.6 6.4 fl oz 190 ml 69.6 1.20 qt 1.14 l 100 3,600 T 6-06H LS 4 36 2 1/8 x 2 5/16 x 3 1/4 10.2 5.6 fl oz 167 ml 61.2 1.05 qt 1.00 l 100 3,600 T 6-06H SS 4 36 2 1/8 x 2 5/16 x 3 1/4 9.2 5.0 fl oz 150 ml 55.2 1.91 pt 904 ml 100 5,400 T 8-04 4 32 2 5/16 x 2 5/16 x 2 5/8 9.8 5.4 fl oz 160 ml 39.2 1.35 pt 642 ml 200 5,400 T 8-04H 4 32 2 5/16 x 2 5/16 x 3 1/4 12.5 6.9 fl oz 204 ml 50 1.73 pt 819 ml 100 4,320 T 8-04EH* 32 2 3/16 x 2 3/16 x 4 1/4 15.5 8.58 fl oz 254 ml 62 1.07 qt 1.01 l 100 3,420 T 8-06 4 48 1 1/2 x 2 5/16 x 2 5/8 5.7 3.1 fl oz 93 ml 34.2 1.18 pt 560 ml 200 5,400 T 8-06 SCC 48 1 1/2 x 2 5/16 x 2 5/8 5.7 3.1 fl oz 93 ml 34.2 1.18 pt 560 ml 200 5,400 T 8-06H LS 4 48 1 1/2 x 2 5/16 x 3 1/4 7.5 4.1 fl oz 122 ml 45 1.55 pt 737 ml 100 4,500 T 9-06H LS* 4 54 1 1/2 x 2 5/16 x 3 1/2 7.2 4.4 fl oz 130 ml 43.2 1.65 pt 781 ml 100 3,600 T 10-04 40 2 3/16 x 1 7/8 x 2 5/8 7.3 4.0 fl oz 119 ml 29.2 1.00 pt 476 ml 200 5,400 T 10-06H LS 4 60 1 4/5 x 1 1/2 x 3 1/2 6.7 3.74 fl oz 110 ml 40 1.40 pt 663 ml 100 4,050 T 10-06EH LS 4 60 1 3/4 x 1 1/2 x 3 7/8 7.8 4.33 fl oz 128 ml 47 1.62 pt 770 ml 100 3,600 T 12-01 4 12 4 9/16 x 3 x 2 5/8 28.5 15.7 fl oz 467 ml 28.5 15.7 fl oz 467 ml 200 5,400 T 12-03 4 36 3 x 1 1/2 x 2 5/8 7.6 4.19 fl oz 124 ml 22.8 12.6 fl oz 373 ml 200 5,400 T 12-04 48 2 5/16 x 1 1/2 x 2 5/8 5.8 3.21 fl oz 95 ml 23.2 12.8 fl oz 380 ml 200 5,400 T 12-04S 4 48 2 5/16 x 1 1/2 x 2 5/8 6 3.31 fl oz 98 ml 24 13.2 fl oz 393 ml 200 5,400 T 12-04SS 48 2 5/16 x 1 1/2 x 2 5/8 5 2.7 fl oz 81 ml 20 11.0 fl oz 327 ml 200 5,400 T 12-04H LS 4 48 2 5/16 x 1 1/2 x 3 1/4 6.8 3.7 fl oz 111 ml 27.2 15.0 fl oz 445 ml 100 3,600 T 12-06H LS* 4 72 1 1/2 x 1 1/2 x 3 1/4 Äù 4.1 2.3 fl oz 68 ml 24.8 13.8 fl oz 409 ml 100 3,240 T 18-01 4 18 3 x 3 x 2 5/8 18.1 10.0 fl oz 296 ml 18.1 10.0 fl oz 296 ml 200 5,400 T 18-01D 4 18 3 x 3 x 3 19.4 10.74 fl oz 317 ml 319.4 10.74 fl oz 317 ml 100 4,500 T 18-01XD 4 18 3 x 3 x 3 1/4 22.8 12.6 fl oz 373 ml 22.8 12.6 fl oz 373 ml 100 3,240 T 18-01R* 18 4 5/8 x 1 7/8 x 2 5/8 16.7 9.2 fl oz 273 ml 16.7 9.2 fl oz 273 ml 200 5,400 T 18-02* 36 3 x 1 1/2 x 2 5/8 7.8 4.2 fl oz 127 ml 15.6 8.6 fl oz 255 ml 200 5,400 T 18-02R* 36 2 5/16 x 1 7/8 x 2 5/8 7.5 4.1 fl oz 122 ml 15 8.3 fl oz 245 ml 200 5,400 T 18-03RH* 4 54 1 1/2 x 1 7/8 x 3 1/4 Äù 6 3.3 fl oz 98.3 ml 18 9.9 fl oz 295 ml 100 5,400 T 18-03R* 54 1 7/8 x 1 1/2 x 2 5/8 4.5 2.4 fl oz 73 ml 13.5 7.4 fl oz 221 ml 200 5,400 T 18-03RS* 54 1 7/8 x 1 1/2 x 2 5/8 5.8 3.2 fl oz 95 ml 17.4 9.6 fl oz 285 ml 200 5,400 T 18-03T* 54 3 cells 2 5/8 deep 5.6 3.0 fl oz 91 ml 16.8 9.2 fl oz 275 ml 200 5,400 T 18-03TS* 54 3 semi cells 2 5/8 deep 5.8 3.2 fl oz 95 ml 17.4 9.6 fl oz 285 ml 200 5,400 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 38 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

S Series Flats and Inserts S Series Flat (8 1/2 x 20 ) The S Series has an 8 1/2 x 20 footprint. To support the inserts, S Series flats have matching full-height support ribs to withstand the rigors of automation from transplanting to shipping. Another advantage of the S Series is the ease of labeling it offers to price and identify your crop. SPECIAL NOTE: Some available in all guages. Check with your sales rep. SF 2 SF 3 SF 4 SF4-10 SF 5 SF 6 www.eastjordanplastics.com 39

S Series Flats and Inserts SF 8 SF 10 Low Rib* SF 12 SF 12 FS SF 18 SF 18 SCR SF 2 100 5,000 N/A N/A N/A N/A SF 3 100 5,000 N/A N/A N/A N/A SF 4 100 5,500 N/A N/A N/A N/A SF 4-10 100 5,000 N/A N/A N/A N/A SF 5 100 5,500 N/A N/A N/A N/A SF 6 100 5,000 N/A N/A N/A N/A SF 8 100 5,000 N/A N/A N/A N/A SF 10 Low Rib* 100 5,000 N/A N/A N/A N/A SF 12 100 5,500 100 5,000 N/A N/A SF 12 FS 100 5,500 N/A N/A N/A N/A SF 18 100 5,000 N/A N/A N/A N/A SF 18 SCR 100 5,000 N/A N/A N/A N/A Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 40 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

S Series Inserts (8 1/2 x 20 ) S 2-08H S 2-09H S 2-24H S 3-06 SQ S 3-09H S 4-06H S 4-10 LS S 4-12H S 5-08H LS S 6-06H S 6-06H LS S 6-06EH LS S 8-06H LS S 10-04L LS S 10-04H LS S 12-01 S 12-03 S 12-04 S 12-04 LS S 12-04 FC S 12-04 S S 12-04H LS S 18-01H S 18-02H S 18-02RH S 18-03RH Black Dots = Handle Hole Placement www.eastjordanplastics.com 41

S Series Flats and Inserts Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet S 2-08H * 16 2 1/4 x 3 7/8 x 3 1/2 20.1 11.13 fl oz 329.3 ml 80.4 2.77 qt 2.63 l 100 5,000 S 2-09H * 18 2 1/2" x 3" x 3 1/4" 17.5 9.6 fl oz 286 ml 157.5 2.72 qt 2.58 l 100 3,600 S 2-24H * 48 2 1/4" x 1 1/4" x 3 1/4" 5.7 3.1 fl oz 93 ml 136.8 2.36 qt 2.24 l 100 3,600 S 3-06 SQ 18 2 1/2" x 3" x 3" 16.6 9.1 fl oz 272 ml 99.6 1.71 qt 1.62 l 100 6,000 S 3-09H * 27 2 1/2" x 2" x 3" 10.2 5.6 fl oz 167 ml 91.8 1.58 qt 1.50 l 100 3,000 S 4-06H 24 2 3/16" x 2 9/16" x 3 1/2" 12.3 6.8 fl oz 200 ml 73.8 1.27 qt 1.2 l 100 4,500 3,900 S 4-10 LS 40 1 7/8" x 1 13/16" x 2 3/4" 6.5 3.6 fl oz 106 ml 64.7 1.12 qt 1.06 l 200 5,000 S 4-12H * 48 2 1/4" x 1 1/4" x 3 1/4" 5.7 3.1 fl oz 93 ml 68.4 1.18 qt 1.12 l 100 5,000 S 5-08H LS 40 1 15/16" x 1 3/4" x 3 1/4" 7.3 4.1 fl oz 121 ml 59.1 1.02 qt 968 ml 100 5,400 S 6-06H 36 2" x 2 1/8" x 3 1/4" 9 4.9 fl oz 147 ml 54 1.86 pt 884 ml 100 5,000 S 6-06H LS * 36 1 7/8" x 2 1/16" x 3 1/4" 8.3 4.5 fl oz 136 ml 49.8 1.71 pt 816 ml 100 5,000 S 6-06EH LS * 36 1 7/8" x 2 1/16" x 3 1/2" 9.5 5.2 fl oz 155 ml 57 1.97 pt 934 ml 100 3,000 S 8-06H LS 48 2" x 2 1/4" x 3 1/4" 5.9 3.2 fl oz 96 ml 35.4 1.22 pt 580 ml 100 5,000 S 10-04L LS* 40 1 7/8" x 1 3/4" x 2 3/4" 6.3 3.4 fl oz 103 ml 25.4 14.0 fl oz 416 ml 100 200 6,000 5,600 S 10-04H LS 40 1 7/8" x 1 3/4" x 3 1/4" 7 3.8 fl oz 114 ml 28 15.4 fl oz 458 ml 100 5,000 S 12-01 12 3 7/8" x 3" x 2 3/4" 25.3 14.0 fl oz 414 ml 25.3 14.0 fl oz 414 ml 200 6,000 S 12-03 36 1 1/4" x 3" x 2 3/4" 6.4 3.5 fl oz 104 ml 19.2 10.6 fl oz 314 ml 200 6,000 S 12-04 48 1 15/16" x 1 1/2" x 2 3/4" 4.7 2.6 fl oz 77 ml 18.8 10.4 fl oz 308 ml 200 6,000 S 12-04 LS 48 1 15/16" x 1 1/2" x 2 3/4" 4.7 2.6 fl oz 77 ml 18.8 10.4 fl oz 308 ml 200 6,000 S 12-04 FC 48 1 15/16" x 1 1/2" x 2 3/4" 5.1 2.8 fl oz 83 ml 20.4 11.2 fl oz 334 ml 200 6,000 S 12-04 S 48 1 15/16" x 1 1/2" x 2 3/4" 5.6 3.0 fl oz 91 ml 22.4 12.4 fl oz 367 ml 200 6,000 S 12-04H LS 48 1 1/2" x 2" x 3 1/4" 6.25 3.5 fl oz 102.5 ml 25 13.9 fl oz 410 ml 100 5,000 S 18-01H 18 2 1/2" x 3" x 3 1/4" 17.5 9.6 fl oz 286 ml 17.5 9.6 fl oz 286 ml 100 5,000 S 18-02H * 36 2 1/2" x 1 1/2" 3 1/4" 6.7 3.7 fl oz 110 ml 13.4 7.4 fl oz 220 ml 100 5,000 S 18-02RH * 36 2" x 1 7/8" x 3 1/4" 7.5 4.1 fl oz 122 ml 15 8.2 fl oz 245 ml 100 4,600 S 18-03RH * 54 1 15/16" x 1 7/8" x 3 1/4" 4.6 2.5 fl oz 75 ml 13.8 7.6 fl oz 225 ml 100 5,000 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 42 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

L Series Flats and Inserts L Series Flat (7 1/2 x 20 ) The L Series offers a 7 1/2 x 20 footprint. The L 6-06H LS insert is an excellent way to save space and accepts an adhesive label. We produce a special-sized insert for the LF 6 and LF 10 flats. They are the C 6-06H and the C 10-04H LS, which measure 7 3/4 x 20. The high center rib in these flats improves stacking strength. SPECIAL NOTE: Some available in all gauges. Check with your sales rep. LF 2 LF 3 LF 3 (Punched) LF 4 WMB LF 5 LF 6 LF 6 (Punched) LF 8 LF12 LF 2 100 6,600 N/A N/A N/A N/A LF 3 200 6,600 N/A N/A N/A N/A LF 3 P (Punched) 200 6,600 N/A N/A N/A N/A LF 4 WMB 150 6,600 N/A N/A N/A N/A LF 5 200 6,600 N/A N/A N/A N/A LF 6 200 6,600 N/A N/A N/A N/A LF 6 P (Punched) 200 6,600 N/A N/A N/A N/A LF 8 200 6,600 N/A N/A N/A N/A LF 12 200 6,600 N/A N/A N/A N/A Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; www.eastjordanplastics.com 43

L Series Flats and Inserts L Series Inserts (7 1/2 x 20 ) L 3-04 SQ L 3-06H SQ L 3-09 LS L4-06 EH LS L 5-08H LS L 6-06H LS L 8-04H LS L 8-06H LS L 8-06SEH LS L 12-04H LS L 3-04 SQ 4 4 12 2 7/8 x 3 3/8 x 3 7/16 N/A 14.8 fl oz 437 ml N/A 1.84 qt 1.75 l 200 6,600 L 3-06H SQ 4 4 18 2 3/16 x 2 7/8 x 3 7/16 15.8 8.73 fl oz 258 ml 94.6 1.64 qt 1.55 l 100 3,960 L 3-09 LS* 4 4 27 1 7/8 x 2 3/16 x 3 1/4 8.5 4.69 fl oz 139 ml 76.5 1.32 qt 1.25 l 100 6,600 L 4-06EH LS 4 4 24 2 3/16 x 2 3/16 x 3 3/4 13.5 7.47 fl oz 221 ml 81 1.40 qt 1.32 l 100 3,960 L 5-08H LS 4 40 1 11/16 x 1 13/16 x 3 1/2 6.8 3.77 fl oz 111 ml 54.5 1.88 pt 893 ml 100 6,000 L 6-06H LS 4 36 1 7/8 x 2 1/16 x 3 1/4 7.8 4.32 fl oz 127 ml 46.8 1.62 pt 767 ml 200 6,600 L 8-04H LS 4 32 1 5/8 x 2 3/8 x 3 8.1 4.72 fl oz 140 ml 32.4 1.18 pt 560 ml 100 7,200 L 8-06H LS 4 48 1 9/16 x 1 11/16 x 3 1/4 5.5 3.07 fl oz 90.8 ml 33.25 1.15 pt 544.8 ml 100 7,200 L 8-06SEH LS 4 48 1 9/16 x 1 11/16 x 4 7.3 4.05 fl oz 119.8 ml 43.9 1.52 pt 719 ml 100 4,800 L 12-04H LS 4 48 1 1/2 x 1 11/16 x 3 1/4 5.8 3.1 fl oz 94 ml 23.2 12.4 fl oz 376 ml 200 6,600 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Black Dots = Handle Hole Placement * Special order item-minimum order requirements apply 44 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

C, CT, E, G, K, P, Y Series Flats and Inserts C Series Inserts (7 3/4 x 20 ) C 6-06H C 10-04H LS Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet C 6-06H * 36 2 1/2" x 1 7/8" x 3 1/4" 7.86 4.35 fl oz 128.8 ml 47.1 1.63 pt 772 ml 200 6,600 C 10-04H LS * 40 1 3/4" x 1 13/16" x 3 1/4" 6.45 3.5 fl oz 105 ml 25.8 14.2 fl oz 422 ml 100 6,600 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; NOTE: C inserts are 7 3/4 x 20 and fit the corresponding L Series Flats * Special order item-minimum order requirements apply CT Series Flats & Inserts (11 1/2 x 14 3/4 ) The CT Series represents an 11 1/2 x 14 3/4 flat which has long been called the Connecticut Flat. CTF 5 CTF 8 CT 5-08 LS CT 8-06 LS Economy Weight Standard Weight Heavy Duty Weight Item No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet CTF 5 N/A N/A N/A 4,200 N/A N/A CTF 8 N/A N/A N/A 3,600 N/A N/A Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet CT 5-08 LS 40 1 5/16" x 2 5/8" x 2 3/4" 6.41 3.55 fl oz 105 ml 51.2 1.77 pt 840 ml N/A 6,000 CT 8-06 LS 48 1 5/8" x 1 5/8" x 2 3/4" 5.13 2.84 fl oz 84 ml 30.7 1.06 pt 504 ml N/A 6,600 Key: Key: CRO CRO = Center = Center Rib Only; Rib Only; D = Deep; D = Deep; EH = Extra EH = High; Extra FC High; = Full FC Cell; = Full FS = Cell; Full FS Side; = H Full = High; Side; HD H = High; Heavy HD Duty; = Heavy HR = High Duty; Rib; HR LS = High Label Rib; Side; LS M = Label Medium; Side; OSR M = Offset Medium; Rib; OSR P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; www.eastjordanplastics.com 45

C, CT, E, G, K, P, Y Series Flats and Inserts E Series Flats & Inserts (6 2/3 x 19 3/4 ) The E Series footprint is 6 2/3 x 19 3/4. The EF Press-Fit Tray is quite versatile in that it will accept either an E 12-01H sheet of pots or 12 individual T4 Square Press-Fit pots. EF 4-12 PFT E 12-01H Economy Weight Standard Weight Heavy Duty Weight Item No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet EF 4-12 PFT * N/A N/A 150 5,850 N/A N/A Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet E 12-01H * 12 3" x 3" x 31/4" 24 13.2 fl oz 393 ml 24 13.2 fl oz 393 ml 100 5,400 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 46 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

G Series Flats & Inserts (7 x 21 ) With its 7 x 21 footprint, the G Series is a space-saving design with several insert and pot options. The G 6-06H LS and G 6-06EH LS provide two soil volumes while maintaining a label-friendly sidewall. The G 12-01H insert may be used as a two- row sheet-of-pots system with the GF 4-12 flat. The A4 Press-Fit pots may also be used with the GF 4-12 flat, making an attractive retail presentation. GF 6 GF 4-12 PFT G 6-06H LS G 6-06EH LS G 12-01H Economy Weight Standard Weight Heavy Duty Weight Item No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet GF 6 * 200 6,600 100 6,000 N/A N/A GF 4-12 PFT * 150 6,600 150 5,400 N/A N/A Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet G 6-06H LS * 36 1 7/8" x 2 1/16" x 3 1/4" 7.3 4.0 fl oz 119 ml 43.8 1.51 pt 717 ml 100 6,600 G 6-06EH LS * 36 1 7/8" x 2 1/16" x 3 1/2" 8.2 4.5 fl oz 134 ml 49.2 1.70 pt 806 ml 100 6,050 G 12-01H * 12 3 7/8" x 3" x 3 1/4" 28.5 1.0 pt 473 ml 28.5 16.0 fl oz 473 ml 150 4,200 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply www.eastjordanplastics.com 47

C, CT, E, G, K, P, Y Series Flats and Inserts K Series Flats & Inserts (8 x 20 ) With an 8 x 20 footprint, the K Series provides a space-saving option without compromising your crop. The high center rib in the KF 6 flat significantly improves stacking strength. KF 2 KF 6 KF 10 Deep K 2-16EH LS K 6-06H K 10-04EH LS Economy Weight Standard Weight Heavy Duty Weight Item No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet KF 2 * N/A N/A 100 5,500 N/A N/A KF 6 * 100 5,500 100 4,500 N/A N/A KF 10 Deep * N/A N/A 100 5,500 N/A N/A Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet K 2-16EH LS * 32 2 3/8" x 1 7/8" x 4 1/4" 12.26 6.8 fl oz 201 ml 196.1 3.40 qt 3.21 l 100 2,860 K 6-06H * 36 2 1/8" x 2 5/16" x 3 1/4" 8.2 4.5 fl oz 134 ml 49.2 1.70 pt 806 ml 100 5,600 K 10-04EH LS * 40 1 9/10" x 1 4/5" x 4 1/4" 8.5 4.7 fl oz 139.3 ml 34 1.17 pt 557 ml 100 4,620 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 48 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

P Series Flats & Inserts (13 x 16 ¼ ) TP20-01 (Formerly known as PCSS325-20) P 20-01M P 20-01H TP20-01 100 3,000 N/A N/A N/A N/A P 20-01M 4 20 3 x 3 x 3 19.6 10.87 fl oz 321 ml 19.6 10.87 fl oz 321 ml 100 6,000 P 20-01H 4 20 3 x 3 x 3 ½ 24.5 13.6 fl oz 401 ml 24.5 13.6 fl oz 401 ml 100 3,375 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; www.eastjordanplastics.com 49

C, CT, E, G, K, P, Y Series Flats and Inserts Y Series Flats & Inserts (8 1/2 x 21 ) With an 8 1/2 x 21 footprint, the Y Series system has several distinct options. The Y 6-06H LS and Y 12-04H LS inserts both fit the YF6 flat. Our YF 8 flat is made for the Y8-06H LS. The YF 10 flat is paired with the Y 10-01H square sheet of pots. Our YF 12 flat accepts the Y 12-04H LS. YF 6 YF 8 YF 10 YF 12 Y 6-06H LS Y 8-06H LS Y 10-01H Y 12-04H LS YF 6* 200 5,000 N/A N/A N/A N/A YF 8* 100 5,000 N/A N/A N/A N/A YF 10 N/A N/A 100 5,000 N/A N/A YF 12* 100 5,000 N/A N/A N/A N/A Y 6-06H LS* 4 36 2 1/4 x 2 x 3 1/4 9 4.9 fl oz 147 ml 54 1.86 pt 884 ml 100 4,000 Y 8-06H LS* 4 48 1 9/16 x 1 15/16 x 3 1/4 6 3.3 fl oz 98 ml 36 1.24 pt 589 ml 100 5,000 Y 10-01H 4 10 3 3/4 x 3 3/4 x 4 1/8 43 1.48 pt 704 ml 43 1.48 pt 704 ml 100 3,200 Y 12-04H LS* 4 48 1 1/2 x 2 1/4 x 3 1/4 5.7 3.1 fl oz 93 ml 22.8 12.6 fl oz 373 ml 100 5,000 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 50 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Compatibility Charts A Series Flats & Inserts (10 7/8 x 21 1/4 ) Item AF Open AF CRO AF 6 AF 8 AF 12 AF 12 OSR AF 12 SSR AF 18 WA 1121 STD WA 1121 HD A 2-16 * A 2-24 * A 2-36 * A 3-06 * A 6-01 A 6-04 A 6-06 A 6-06H A 6-09 A 6-12 * A 8-01 A 8-04 A 8-04H A 8-06 A 8-08 A 8-09* A 8-12 HD* A 10-01 A 10-04 A 10-06 A 12-01 A 12-02 A 12-03 A 12-04 A 12-04S A 12-06 A 12-06S A 12-06H LS* A 14-01 * A 18-01R * A 18-01 A 18-01H A 18-01EH A 18-02 * A 18-02R * A 18-03R * A 18-03T * A 18-03TS * A 18-04 A 18-04S * A 24-01 A 36-01 HD * A 48-01 HD Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply www.eastjordanplastics.com 51

Compatibility Charts T Series Flats & Inserts (10 x 20 ) Item TF Open TF CRO TF 3 TF 3-16 TF 6 TF 8 TF 10 TF 10-06 WM TF 12 TF 12 OSR TF 18 TF 18 SCR TT 18-01 WT 1020 WT 1006 WM T 2-09H * T 2-16 * T 2-24H LS * T 3-06H SQ T 3-06 Super Pk (3pk per tray) * T 3-16H LS * T 4-08 * T 4-12H LS * T 6-06H T 6-06H LS T 6-06H SS T 8-04 T 8-04H T 8-04EH * T 8-06 T 8-06 SCC T 8-06H LS T 9-06H LS * T 10-04 T10-06H LS T 10-06EH LS T 12-01 T 12-03 T 12-04 T 12-04S T 12-04SS T 12-04H LS T 12-06H LS * T 18-01 T 18-01D T 18-01XD T 18-01R * T 18-02 * T 18-02R * T 18-03RH * T 18-03R * T 18-03RS * T 18-03T * T 18-03TS * Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 52 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

S Series Flats & Inserts (8 1/2 x 20 ) Item SF 2 SF 3 SF 4 SF 4-10 SF 5 SF 6 SF 8 SF 10 Low SF 12 SF 12 FS SF 18 SF 18 SCR WS 8520 S 2-08H * S 2-09H * S 2-24H * S 3-06 SQ S 3-09H * S 4-06H Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply L Series Flats & Inserts (7 1/2 x 20 ) Item LF 2 LF3 LF3 P (Punched) LF4 WMB LF 5 LF 6 LF 6 P (Punched) LF8 LF12 WL 7520 WL 12-7520 L 3-04 SQ L 3-06H SQ L 3-09 LS* L4-06EH LS L 5-08H LS L 6-06H LS L 8-04H LS L 8-06H LS L 8-06SEH LS L 12-04H LS LFH 9-01 MT LFH 12-01 MT S 4-10 LS S 4-12H * S 5-08H LS LFH 12-01 MTL S 6-06H S 6-06H LS * S 6-06EH LS * S 8-06H LS S 10-04L LS S 10-04H LS S 12-01 S 12-03 S 12-04 S 12-04 LS S 12-04 FC S 12-04 S S 12-04H LS S 18-01H S 18-02H * S 18-02RH * S 18-03RH * C Series Flats & Inserts (7 3/4 x 20 ) Item LF 5 LF 6 LF 6 P (Punched) WL 7520 C 6-06H * C 10-04H LS * * Special order item-minimum order requirements apply www.eastjordanplastics.com 53

PRODUCT COLOR GUIDE Choose from a variety of EJP stock colors for your products with our color guide! Please keep in mind that these are approximate colors and there may be some variation when produced. Minimum quantities may apply and may be subject to production run schedule. 2945A BLUE 504A BURGUNDY 472A CHOCOLATE 429A GRAY 360A GREEN GREEN 7530A MOCHA 205A PINK 2665A PURPLE 271A PURPLE 200A RED TERRACOTTA 107A YELLOW 021A ORANGE 54 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190

Thank you for growing with us for 70 years! www.eastjordanplastics.com 55

East Jordan, Michigan Beaverton, Michigan South Haven, Michigan Manufacturing and Recycling Plant South Haven, Michigan - Distribution Warehouse The Responsible Choice For Horticultural Containers 6400 M-32 Highway, P.O. Box 575, East Jordan, Michigan, 49727 Phone: 800-353-1190 Fax: 231-536-7090 www.eastjordanplastics.com 2017 East Jordan Plastics, Inc 56 Call your Regional Sales Manager or East Jordan Customer Service at 1-800-353-1190