BUTTERFLY VALVE CATALOGUE //

BUTTERFLY VALVE CATALOGUE // 11 The Fort Vale of s 1 CATALOGUE REVISION_01-.0.0 Fort Vale Engineering Ltd. 20

BUTTERFLY CATALOGUE // CONTENTS // 2 BUTTERFLY VALVES //» 2 CLAMPED WIDDOP BUTTERFLY VALVE 3 BUTTERFLY VALVES //» 3 HYGIENIC BUTTERFLY VALVE» 3 CLAMPED WIDDOP BUTTERFLY VALVE» 3 CLAMPED PNEUMATIC WIDDOP BUTTERFLY VALVE» 3 FLANGED WIDDOP BUTTERFLY VALVE» 3 TANK-PRO ROAD TANKER BUTTERFLY VALVE» 3 UNIFLY ROAD TANKER BUTTERFLY VALVE» TW0 CLAMPED BUTTERFLY VALVE» TW0 CLAMPED BUTTERFLY VALVE BUTTERFLY VALVES //» CLAMPED WIDDOP BUTTERFLY VALVE Fort Vale Engineering Ltd. 200 BUTT_CONTENTS REV01-.0.0

2 Clamped Widdop 2 Clamped - left hand operated with TIR to handle and padlock facility. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - of 3 and clamped valves. Alternative seal materials; Alloy C2 version; 0L version; available with pneumatic actuation. Fitting Details Part Number : 355/000 202. Specification Weight 2.31 Kgs Design Pressure (MAWP) Bar ( PSI) Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Approved to BS EN2. 5.1 INLET Ø. Ø 5.2 CNAF/PTFE inlet gasket *Note 5005-2 CNAF/PTFE outlet gasket *Note 005-31. Note: Gasket drilling x 1mm holes on a 5mm PCD. Parts drawing 1 2 3 5 11 1 15 1 1 23 Item Description 1 Split ring 3/0011 2 M countersunk bolt 5111-030 3 Washer 2030 Operating lever 3/3 5 Handle 3/0050 Handle location spring 3/00 Handle location pin 3/00 Sockethead capscrew (2) 5111-1 Plain washer (2) 51-005 Stuffing clamp 3/000 11 PTFE stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 1 Spindle 355/5020 15 PTFE spindle seat 355/500 1 Spring washer (2) 51-003 1 Full nut (2) 51-001 1 Body 355/0 1 PTFE O ring 5005-51 20 PTFE O ring 5005-0 21 Bottom spindle 355/5005 22 PTFE lower bush 355/500 23 Closure plate 355/5030 2 PTFE main seal 355/0202 25 Seal clamp plate 355/0201 2 EPDM O ring 5005-1 2 25 2 SEAL KIT Part number 355/0SK contains all parts marked 1 20 21 22 Page 1 Fort Vale Engineering Ltd. 201 BUTT01 REV0-05.0.1

3 Hygienic 3 Concentric Disc - Suitable for hygienic applications. Inlet/outlet connections available include 3 BSP, 3 RJT, 3 Camlock, flanged and weld prepared. Single hand operation with TIR facility. Contact parts manufactured in 31 stainless steel fitted with Silicone seal as standard. Options - Other seal materials available on request. Other connections available on request. Fitting Details Specification Example shown : 35/X 1. Weight Design Pressure (MAWP) Test Pressure Silicone Seal Design Temperature Kg (See Note) Bar (5PSI) Bar ( PSI) 200 C (32 F).1 Note : Weight and seal design temperature varies according to valve specification. Ø3.0 Description FORT VALE 31 ST ST Ø.5 5.2 0. 3 BSP blank cap seal separate 303SS 3 RJT blank cap seal separate 35/RJT3 3 Camlock cap seal separate 0/DC300 Inlet Outlet 3 RJT 3 RJT 35/X 3 RJT 3 BSP 35/0 3 BSTD 3 RJT 35/10 3 BSTD 3 BSP 35/0000 TW 0 3 BSP 35/0S DIN 0 3 Camlock 35/350X X in part number indicates variable seal options. Parts drawing 1 2 3 11 5 Item Description 1 M lock nut 51-032 2 Handle assembly 35/20 3 Top flange 35/5 Spring washer () 51-003 5 M nut () 51-001 Body half See Note 35/XXXX Main seal 5005-5X Lower bearing support 35/302 M hex screw () 5111-03 Vane 35/3020 11 Guide bush 35/3023 X indicates that the part number varies according to the valve specification. Fort Vale Engineering Ltd. 2015 Page 2 BUTT002 REV01-0.0.15

3/000B SERIAL No. 35 MATERIAL VARIOUS M.A.W.P..0BAR DESIGN TEMP 200 C YEAR OF MANUFACTURE: **** Data 3 Clamped Widdop 3 Clamped - left hand operated with TIR to handle and padlock facility. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - lockable handle. Congealing cargo version with semi-spherical closure plate. Right hand operated version. of 2 and clamped valves. TW style body available. Specification Weight 3.5 Kg Design Pressure (MAWP) Bar ( PSI) Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Design approvals by Lloyds Register of Shipping, Rijksdienst, SNCF, RMRS. Approved to BS EN2 Fitting Details Description 3/000B Left hand standard butterfly valve 3/1B Left hand with semi-spherical closure plate 3/000A Right hand standard butterfly valve Part No : 3/000B 1. INLET Ø.2 Ø. Ø.1 SERRATIONS OUTLET CNAF/PTFE inlet gasket 5005-0 CNAF/PTFE outlet gasket 5005-0 Bolting kit 3/10 3 BSP outlet flange 3/0 3 BSP blank cap with PTFE washer 303PS 3 Camlock outlet flange 3/05 3 Camlock blank cap 0/DC300 3 NPT outlet flange 3/0 3 NPT blank cap with PTFE washer 25/3250 Ø111..2 202. Ø1.0.5 Assembly Details Example Discharge Assembly IMPORTANT NOTE BUTTERFLY VALVE MUST BE ASSEMBLED TO THE FOOTVALVE/TANK OUTLET PIPEWORK WHILST IN THE CLOSED POSITION. M1 BOLTS TORQUE SETTING : 0 NM (0 LBF FT) Fort Vale Engineering Ltd. 2015 5005-0 5005-0 3/0 303PS 3/10 Page 3 BUTT0 REV0-.03.15

3 Clamped Widdop Parts drawing 1 2 3 5 11 1 15 1 Item Description 1 Sockethead setscrew 5111-030 2 Washer 2030 3 Split ring 3/0011 Operating lever 3/3 5 Handle 3/0050 Handle location spring 3/00 Handle location pin 3/00 Sockethead capscrew (2) 5111-1 Plain washer (2) 51-005 Stuffing clamp 3/000 11 PTFE stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 1 Spindle 3/0200 15 Split bearing 252/051 1 PTFE spindle seat 3/000 1 Spring washer (2) 51-003 1 Full nut (2) 51-001 1 Body 3/0150 20 Bottom spindle 3/003 21 PTFE bottom bush 3/0035 22 Closure plate 3/000 23 PTFE main seal 3/0002 2 Seal clamp plate 3/005 25 Nitrile O ring 5005-32 SEAL KIT Part number 3/00SK contains all parts marked REPAIR KIT Part number 3/00RKA contains all parts marked 1 1 20 21 22 23 2 25 1 SELF ADHESIVE DECAL - PART NO. 3/0300 Text in English, German and French A detailed step-by-step repair manual is now available for our range of discharge butterfly valves. Please contact our Sales team for further information. Fort Vale Engineering Ltd. 20 Page BUTT0 REV05-03.0.

3 Clamped Pneumatic Widdop 3 Clamped with Spring Return Pneumatic Actuator - valve connection to actuator to ISO 5211 / DIN 333 standards. Counter-clockwise opening. Contact parts manufactured in 31 stainless steel with PTFE seal. Options - a full range of manually operated valves are available. Specification Weight Design Pressure (MAWP) Test Pressure Fitting Details 1 Kg Bar ( PSI) Bar (15 PSI) Valve Design Temperature -0 C to C (-0 F to 3 F) Actuator Design Temperature -20 C to 0 C (- F to 1 F) M1 clamping bolts torque setting 0 NM (0 LBF FT) Operating Pressure Requirements Start to open 3.1 Bar (5 PSI) Fully open 3. Bar (55 PSI) Butterfly valve approved to BS EN2. Part Number : 3/000BPN 3.0 Description 3/000B Standard manually operated butterfly valve 3/000BPN Butterfly valve with pneumatic actuator 5005-0 CNAF/PTFE inlet gasket 5005-0 CNAF/PTFE outlet gasket 3/10 Bolting kit 3/0 3 BSP outlet flange 303PS 3 BSP blank cap with PTFE washer 3/05 3 Camlock outlet flange 0/DC300 3 Camlock blank cap 3/0 3 NPT outlet flange 25/3250 3 NPT blank cap with PTFE washer 0.5 3.5 Ø.1 Ø. Ø115.1 SERRATIONS 11. 1. 3. 2.1 Fort Vale Engineering Ltd. 20 Page 5 BUTT02 REV02-11.0.

3 Clamped Pneumatic Widdop Parts drawing 1 2 3 5 Item Description 1 Spring return actuator 5-115 2 Drive adaptor assembly 3/22 3 Bridge assembly 3/220 M flat section spring washer () 51-003 5 M x 20mm hex head bolt () 5111-22 Stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 Spindle 3/0200 Split bearing 252/051 11 PTFE spindle seat 3/000 Closure plate 3/000 Main seal 3/0002 1 Nitrile O ring 5005-32 15 Seal clamp plate 3/005 1 Bottom bush 3/0035 1 Bottom spindle 3/003 1 Body 3/0150 1 M full nut (2) 51-001 20 M plain washer (2) 51-005 21 M x 25mm socket capscrew (2) 5111-1 SEAL KIT Part number 3/00SK contains all parts marked 21 20 11 1 1 1 15 1 1 Fort Vale Engineering Ltd. 20 Page BUTT02 REV01-11.0.

TM 25. (1.00 ) Data 3 Flanged Widdop 3 Flanged - inlet flange drilled x 1mm holes spaced as shown below on a 1mm PCD; outlet flange with slots 1mm equi-spaced on a 1mm PCD. Left hand operated with TIR and padlock facility to handle. Contact parts manufactured in 31 stainless steel with PTFE seals. Options - alternative inlet flange drilling. Congealing cargo version with semi-spherical closure plate. Steam heated option. Fitting Details Specification Part Number : 3/3A M BOLTS TORQUE SETTING : 50 NM (3 LBF FT) 202. Weight Kgs Design Pressure (MAWP). Bar (0 PSI) Test Pressure.35 Bar (150 PSI) Design Temperature -55 C to 200 C (- to 32 F) SLOTS 1.0 EQUI-SPACED ON A 1.1 MINOR PCD. (OUTLET FLANGE) 3.3 FORT VALE 0mm FLANGED DISCHARGE VALVE 3/3A SEALS: PTFE MAWP:. barg 0.1 psig SERIAL NUMBER: 35 11.3 35 REF TEMP RANGE: -55ºC TO 200º BS EN 2:200 YEAR OF MANUFACTURE: 20XX BODY MATERIAL: 1.0 DN 0 WWW.FORTVALE.COM.2 55 REF INLET Ø.1 HOLES Ø1.0 SPACED AS SHOWN ON A 1.3 PCD. (INLET FLANGE) Ø. Design approvals by Lloyds Register of Shipping, Rijksdienst, SNCF, RMRS. Approved to BS EN2 Description 3/3A hole inlet standard valve 3/3A DIN0 inlet flange for timing positions 3/300A Inlet flange with steam heating provision 3/A Std. valve with semi-spherical closure plate Ø203.2 Ø.5 STD SERRATIONS Ø. STD SERRATIONS Ø1... 51.1 CNAF/PTFE inlet gasket 5005-1 Solid PTFE outlet gasket 5005-1 Dished blind flange 3/0022CM Bolting kit 311/3500 Pivot pin 3/50 Assembly Details Example Top Discharge Assembly Blind flange 3/0022CM Gasket 5005-1 Butterfly valve 3/3A Pivot pin 3/50 Bolting kit 311/3500 Stud kit 3/00 Gasket 5005-1 Syphon tube 3/0 Gasket 5005-222 Tank pad 3/000 11.0 (.5 ) Fort Vale Engineering Ltd. 20 Page Ø. (3.50 ) Ø200.0 (. ) BUTT01 REV0-0.03.

3 Flanged Widdop Parts drawing 1 2 3 5 11 1 15 Item Description 1 Countersunk setscrew 5111-030 2 Washer 2030 3 Split ring 3/0011 Operating lever 3/3 5 Handle 3/0050 Handle location spring 3/00 Handle location pin 3/00 Sockethead capscrew (2) 5111-0 Plain washer (2) 51-005 Stuffing clamp 3/000 11 Full nut (2) 51-001 PTFE stuffing clamp bush 3/0301 PTFE O ring (2) 2033 1 Viton O ring 2031 15 Spindle 3/0200 1 Split bearing 252/051 1 PTFE spindle seat 3/000 1 Body 3/11 1 Bottom spindle 3/003 20 PTFE bottom bush 3/0035 21 Closure plate 3/000 22 PTFE main seal 3/0002 23 Nitrile O ring 5005-32 2 Seal clamp plate 3/1 SEAL KIT Part number 3/00SK contains all parts marked REPAIR KIT Part number 3/31RKA contains all parts marked 1 1 1 1 20 21 22 23 2 SELF ADHESIVE DECAL - PART NO. 3/0300 Text in English, German and French A detailed step-by-step repair manual is available for our range of discharge butterfly valves. Please contact our Sales team for further information. Fort Vale Engineering Ltd. 20 Page BUTT015 REV03-31.0.

3 Tank-Pro Road Tanker 3 NB Tank-Pro - weld-prepared inlet and 3 BSP threaded outlet. Lockable handle with T.I.R. as standard. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - body may be supplied with or without 3/ BSP venting port. Outlet may be supplied 3 BSP standard or extended, 3 NPT or weld-prepared. Congealing cargo closure plate may be incorporated. Features Designed specifically to meet the needs of the road tanker industry and especially suited to chemical applications. Supplied as a complete unit requiring no extra parts to assemble the valve to the tank. The valve concept eliminates the need for the valve to be centralized when fitting to the tank, thus avoiding potential valve damage and/or leakage. Optional 3/ BSP port integral to the valve body allows for a purge or sampling facility. Clean valve internal lines reduces the risk of contamination between successive cargoes. Eccentric outlet facilitates full self-draining. Simple maintenance procedure with all internal mechanism and seals common to the standard Fort Vale 3 butterfly valve, thus reducing the required stock of spare parts. Lockable handle with TIR facility as standard to meet ADR requirements. A removable square drive key is included with each valve. Specification Weight.0 Kgs Design Pressure Bar ( PSI) Body Hydraulic Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Lloyds Register of Shipping Design Appraisal document number DCF3/1. Approved to BS EN2. Rijksdienst voor het Wegverkeer Approval number VLG S-301. Body Outlet 3/00SXBA Non-vented 3 BSP standard 3/00SVBA Vented 3/ BSP 3 BSP standard 3/00SXEA Non-vented 3 BSP extended 3/00SVEA Vented 3/ BSP 3 BSP extended 3 BSP blank cap with PTFE seal 303PS Conversion mounting kit 3/01KIT Fitting Details Example shown : 3 Tank-Pro - part number 3/00SXBA 200.2.3. 15. 5.0 11. INLET ADAPTOR HOLES Ø1.0 EQUI-SPACED AS SHOWN ON A 0.0 PCD Ø..2 Ø.5 3"BSP THREAD OUTLET ADAPTOR HOLES Ø11.5 EQUI-SPACED AS SHOWN ON A 11.2 PCD Fort Vale Engineering Ltd. 20 Page BUTT00 REV03-20.03.

3 Tank-Pro Road Tanker Parts drawing 1 2 3 5 3 1 15 1 11 30 31 32 33 1 2 2 2 1 1 23 21 20 22 2 25 2 Item Description 1 M socket head set screw 5111-030 2 Washer 2030 3 Handle assembly 3/005 Electrical continuity spring 3/001 5 M socket head cap screw (2) 5111-1 M plain washer (2) 51-005 Stuffing plate 3/001 Stuffing clamp bush 3/0301 PTFE O Ring 2033 Viton O ring 2031 11 Spindle 3/0200 Split bearing *See Note A 252/051 Perfluoroelastomer O Ring 5005-5 1 PTFE spindle seat 3/000 15 M full nut () 51-00 1 M spring washer () 51-0 1 M hex head set screw () 5111-023 Item Description 1 Inlet adaptor *See Note B 3/ 1 CNAF/PTFE inlet gasket 5005-0 20 Nitrile O ring 5005-32 21 Seal clamp 3/1 22 PTFE main seal 3/0002 23 Closure plate 3/000 2 3/ Taper plug *See Note B 5-0XX 25 Bottom spindle 3/003 2 Bottom spindle bush 3/0035 2 M socket head cap screw () 5111-053 2 M spring washer () 51-002 2 3 BSP outlet *See Note B 3/30 30 PTFE outlet seal 5005-0 31 Body (non-vented) *See Note B 3/20A 32 M full nut (2) 51-001 33 M spring washer (2) 51-003 3 Key 3/25 Note A : Split bearing, part no. 252/051 is used in valves manufactured since November 2011. Please order 252/051 in addition to 3/00SK if it is required as a spare part. Fort Vale Engineering Ltd. 20 Note B : Part number varies according to specification SEAL KIT part number 3/SK contains all parts marked Page BUTT00 REV03-2.03.

3 Unifly Road Tanker 3 Unifly Road Tanker - weld-prepared inlet and 3 BSP threaded outlet. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - body may be supplied with or without 3/ BSP venting port. Inlet adaptor available straight, angled or with 5mm I/D. Specification Body Inlet Adaptor 3/2500AVA Vented 3/ BSP Angled 3/2500ANA Non-vented Angled 3/2500SVA Vented 3/ BSP Straight 3/2500SNA Non-vented Straight 3/2500BVA Vented 3/ BSP 5mm I/D 3/2500BNA Non-vented 5mm I/D 3/2500NVA Vented 3/ BSP No inlet adaptor Weight 5. Kgs Design Pressure (MAWP) Bar ( PSI) Service Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C -0 F to 32 F Approved to BS EN2. 3/2500NNA Non-vented No inlet adaptor Part Number 303PS Description 3 BSP blank cap with PTFE seal Fitting Details Part Number : 3/2500XXA 2. 5 11.3 5 Ø. Ø..2 Ø5.5 3"BSP 200.3 INLET ADAPTOR X Ø1.0 HOLES EQUI-SPACED ON A 0.0 PCD. Fort Vale Engineering Ltd. 201 35. FULL THREAD Page 11 BUTT030 REV02-0.0.1

Parts drawing 3 Unifly Road Tanker 1 2 3 5 31 11 30 23 2 25 2 2 1 2 2 15 1 1 1 22 21 20 1 Item Description 1 Split ring 3/0011 2 Handle lever 3/3 3 Countersunk bolt 5111-030 Retaining washer 2030 5 Butterfly handle 3/0050 Handle spring 3/00 Electrical continuity spring 3/001 M cap screw (2) 5111-1 M plain washer (2) 51-005 Stuffing clamp 3/000 11 M full nut (2) 51-001 M spring washer (2) 51-003 Stuffing clamp bush 3/0301 1 Spindle 3/0201 15 Viton O ring 2031 1 PTFE spindle seat 3/000 SEAL KIT Part number 3/25SK contains all parts marked Fort Vale Engineering Ltd. 201 Item Description 1 Butterfly valve body with vent 3/2520 Butterfly valve body without vent 3/25 1 3/ BSP taper plug *See note 5-011 1 M full nut () 51-00 20 M spring washer () 51-0 21 Bottom bush 3/0035 22 Bottom spindle 3/003 23 M hex bolt () 5111-032 2 Inlet flange **See note 3/XX 25 CNAF/PTFE gasket (sold separate) 5005-0 2 Nitrile O ring 5005-32 2 Seal clamp 3/1 2 PTFE main seal 3/0002 2 Closure plate 3/000 30 PTFE O ring 2033 31 Handle location pin 3/00 *Note Item 1 is required only on the vented assembly. **Note Item 2 part no. varies according to specification. Page BUTT031 REV02-0.0.1

TW0 Clamped 0mm Clamped - drilled TW 0. Designed to clamp between two TW0 flanges with the bolts passing through the valve body holes. Left hand operated lockable handle with T.I.R. Contact parts manufactured in 31 stainless steel with PTFE seal. Options - TW0 style body. Fitting Details Specification Example shown : 3/5500B Weight 5. Kg Design Pressure (MAWP) Bar ( PSI) Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Design approval by AIB Vincotte. Approved to BS EN2 HOLES Ø.0 EQUI-SPACED ON A 0.0 PCD (TW0) 5.0 22.5 Parts Drawing 15.3 Ø.5 OVER SERRATIONS Ø.2.2 Ø. Ø11. OVER SERRATIONS Ø152. Description 3/5500B TW0 clamped butterfly valve /5500B TW0 clamped butterfly valve 5005-15 PTFE/CNAF TW0 envelope gasket 5/001 TW0 mating flange 3/55 3 BSP eccentric TW0 outlet flange 22 21 20 1 1 2 3 5 11 1 15 1 Item Description 1 M socket capscrew (2) 5111-1 2 M plain washer (2) 51-005 3 M countersunk setscrew 5111-030 Barrel lock handle 3/005 5 Stuffing clamp 3/001 Stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 Butterfly valve spindle 3/0200 Split bearing 252/051 11 PTFE spindle seat 3/000 Body 3/55 Closure plate 3/000 1 Main seal 3/0002 15 Nitrile O ring 5005-32 1 Seal clamp 3/1 1 Bottom bush 3/0035 1 Bottom spindle 3/003 1 M full nut (2) 51-001 20 M flat section spring washer (2) 51-003 21 Washer 2030 22 Operating key (sold separately) 3/25 1 1 SEAL KIT 3/00SK contains all parts marked REPAIR KIT 3/50RKB contains all parts marked Fort Vale Engineering Ltd. 20 Page BUTT02 REV0-31.0.

/5500B SERIAL No: 35 MATERIAL: VARIOUS MAWP:.0BAR TEMP RANGE MAX: 200 C MIN: -0 C Data TW0 Clamped 0mm Clamped - drilled TW0. Designed to clamp between two TW0 flanges with the bolts passing through the valve body holes. Left hand operated lockable handle with T.I.R. Contact parts manufactured in 31 stainless steel with PTFE seal. Options - TW0 style body. Fitting Details Example shown : /5500B 22.5 HOLES Ø1.0 EQUI-SPACED ON A 150.0 PCD (TW0) Parts Drawing 5 Ø.1 Ø3.5 STD SERRATIONS Ø11.5 1..3 INLET Ø1. Ø11.3 Specification Weight Kg Design Pressure (MAWP) Bar ( PSI) Test Pressure. Bar (1.1 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Approved to BS EN2 Description 3/5500B TW0 clamped butterfly valve /5500B TW0 clamped butterfly valve 5005-32 PTFE/CNAF TW0 envelope gasket 5/001 TW0 mating flange /515 BSP eccentric TW0 outlet flange 22 1 15 1 2 3 5 11 1 1 1 20 21 Item Description 1 M countersunk setscrew 5111-030 2 Washer 2030 3 Barrel lock handle 3/005 M socket capscrew (2) 5111-1 5 M plain washer (2) 51-005 Stuffing clamp 3/001 Stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 Spindle 3/0200 11 Split bearing 252/051 PTFE spindle seat 3/000 M full nut (2) 51-001 1 Closure plate /000 15 Bottom spindle 3/003 1 Bottom bush 3/0035 1 M flat section spring washer (2) 51-003 1 Butterfly valve body /0 1 PTFE seal /0002 20 Nitrile O ring 5005-35 21 Seal clamp plate /5505 22 Operating key (sold separately) 3/25 1 SEAL KIT /00SKB contains all parts marked REPAIR KIT /50RKB contains all parts marked Fort Vale Engineering Ltd. 20 Page 1 BUTT02 REV05-31.0.

/000B SERIAL No. 35 MATERIAL VARIOUS M.A.W.P..0 BAR DESIGN TEMP 200 C Data Clamped Widdop Clamped - left hand operated with TIR to handle and padlock facility. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - lockable handle. Congealing cargo version with semi-spherical closure plate. Version with high temperature seals. Pneumatic actuator available. of 2 and 3 clamped valves. Fitting Details Specification Part no. /000B.1 Weight Kg Design Pressure (MAWP) Bar ( PSI) Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) M1 bolts torque setting 0 Nm Ø1. Ø11.3 Above information varies according to specification. Design approval by Lloyds Register of Shipping. Approved to BS EN2. 202. Ø.1 Ø152. STD SERRATIONS Ø.1.3 CNAF/PTFE inlet gasket 5005- CNAF/PTFE outlet gasket 5005- Bolting kit ( x bolts, nuts, washers) /10 BSP outlet flange /0 BSP blank cap with PTFE washer 30PSC NPT outlet flange /0 NPT blank cap with PTFE washer 25/000 Description /000B Left hand standard butterfly valve /500B Left hand with semi-spherical closure plate /0HTB Fitted with high temperature seals Assembly Details Example Assembly IMPORTANT NOTE BUTTERFLY VALVE MUST BE ASSEMBLED TO THE FOOTVALVE/TANK OUTLET PIPEWORK WHILST IN THE CLOSED POSITION. Fort Vale Engineering Ltd. 201 5005- /000B 5005- /0 30PSC Page /10 15 BUTT01 REV0-20.01.1

Parts drawing Clamped Widdop 1 2 3 5 11 1 15 Item Description 1 Split ring 3/0011 2 Sockethead setscrew 5111-030 3 Washer 2030 Operating lever 3/3 5 Handle 3/0050 Handle location spring 3/00 Handle location pin 3/00 Sockethead capscrew (2) 5111-1 Plain washer (2) 51-005 Stuffing clamp 3/000 11 PTFE stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 1 Spindle 3/0200 15 Split bearing 252/051 1 PTFE spindle seat 3/000 1 Closure plate /000 1 Lower spindle 3/003 1 PTFE lower spindle bush 3/0035 20 Spring washer (2) 51-003 21 Full nut (2) 51-001 22 Body /0150 23 PTFE main seal /0002 2 Nitrile O ring 5005-35 25 Seal clamp plate /5505 SEAL KIT Part number /00SKB contains all parts marked REPAIR KIT Part number /00RKB contains all parts marked 1 1 20 21 22 23 2 25 1 1 SELF ADHESIVE DECAL - PART NO. 32/0300 Text in English, German and French A detailed step-by-step repair manual is now available for our range of discharge butterfly valves. Please contact our Sales team for further information. Fort Vale Engineering Ltd. 20 Page 1 BUTT01 REV03-31.0.

Page 1 THIS PAGE IS INTENTIONALLY BLANK

Fort Vale UK Head Office & Manufacturing Plant Tel : + (0)2 0 Fax : + (0)2 1 Email : sales@fortvale.com Fort Vale USA Tel : +1 21 1 0 Fax : +1 21 1 11 Email : ussales@fortvale.com Fort Vale Netherlands Tel : +31 (0) 3333 Fax : +31 (0) Email : bvsales@fortvale.com Fort Vale Russian Federation Tel : + 1 2 0 Email : rw@fortvale.ru All goods supplied will be subject to Fort Vale Engineering Ltd Terms and Conditions of Sale (Ref. FV) which are available upon request, or may be viewed at www.fortvale.com. Please note that this brochure and the contents herein remain the property of Fort Vale Engineering Limited. This brochure may not be copied or reproduced, or the information contained herein divulged to any third party without the prior written permission of Fort Vale Engineering Limited. Repair/refurbishment/resetting of Fort Vale valves may be carried out only by trained and authorised personnel. Fort Vale Engineering Limited shall not, in any circumstances, be liable for injuries, losses, expenses or damage, direct or consequential, sustained by the buyer or any person which may in any degree be attributable to the adoption, either by the buyer or any third party, of technical or other information, data or advice given on behalf of Fort Vale Engineering Limited or however otherwise caused in relation to the use of its products in accordance with Fort Vale Engineering Limited s recommendation. The specifications included in this catalogue are intended to be generic and must be interpreted as equivalent or functionally equivalent. The identification of many items is facilitated by illustrations (photographs and line drawings). The mention of, or reference to specific companies, national standards, or trade names, including those that might appear on the photographs, is intended for illustration purposes only. It does not imply an endorsement, preference or availability of any specific standard, brand or supplier. The data and information contained herein is being provided for information only and without responsibility, and Fort Vale Engineering Limited makes no representations or warranties, either expressed or implied, as to the accuracy, completeness, or fitness for a particular purpose. Fort Vale Engineering Limited does not accept any responsibility or liability with regard to the reliance on, or use of this data and information. Fort Vale Engineering Ltd. 201 REV_1.03.1 Fort Vale P.R. China Tel : + 21 2 Fax : + 21 2 Email : cnsales@fortvale.com Fort Vale Singapore Tel : +5 515 50 Fax : +5 515 303 Email : sgsales@fortvale.com Fort Vale Australia Tel : +1 33 5 Email : ausales@fortvale.com www.fortvale.com