LINEAR ACTUATORS. Courtesy of Steven Engineering, Inc. - (800)

LINEAR ACTUATORS Pre-assembled, all-in-one linear actuators save design and installation time. Choose from NSK's two product lines: MonocarrierTM and ToughcarrierTM. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Linear Actuators 1 Monocarrier TM 1.1 Features...4 1.2 Classifications and Series...6 1.3 Optional Components...8 1.4 Selection of Monocarrier TM...9 1. Maintenance...20 NSK Clean Grease LG2 Specification... 22 1.7 Characteristics and Evaluation Method... 22 1.8 Special Specifications... 23 1.9 Sensor Specification... 24 2 MCM Series 2.1 MCM Series Reference Number Coding...28 2.2 MCM Series Dimension Table of Standard Products...29 2.3 MCM Series Optional Accessories...4 3 MCH Series 3.1 MCH Series Reference Number Coding...80 3.2 MCH Series Dimension Table of Standard Products... 81 3.3 MCH Series Optional Accessories...88 4 ToughCarrier TM 4.1 Features...1 4.2 Reference Number Coding...1 4.3 ToughCarrier TM TCH06... 2 4.4 ToughCarrier TM TCH09... 4 4. ToughCarrier TM TCH... 6 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 1

Monocarrier TM 2 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

1.1 Features... 4 1.2 Classifications and Series...6 1.3 Optional Components... 8 1.4 Selection of Monocarrier TM 1.4.1 Procedures for Selecting Monocarrier TM...9 1.4.2 Rigidity...9 1.4.3 Maximum Speed... 1.4.4 Accuracy Grade...12 1.4. Stroke and Ball Screw Lead...12 1.4.6 Basic Load Rating...14 1.4.7 Estimation of Life Expectancy... 16 1.4.8 Example of Life Estimation... 18 1. Maintenance 1..1 Maintenance Method... 20 1..2 NSK K1 TM Lubrication Unit...21 NSK Clean Grease LG2 Specification... 22 1.7 Characteristics and Evaluation Method 1.7.1 Positioning Accuracy... 22 1.7.2 Repeatability... 22 1.7.3 Running Parallelism... 22 1.8 Special Specifications... 23 1.9 Sensor Specification 1.9.1 Proximity Switch... 24 1.9.2 Photo Sensor... 2 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 3

Monocarrier TM Features 1 Monocarrier TM 1.1 Features NSK s Monocarrier TM is the culmination of technology and innovation in linear motion. This lightweight, compact, single-axis linear actuator integrates NSK ball screw, linear guide and support bearings into one unit. 4 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

1 Lightweight, Compact Design Available in two different product styles depending on application: Lightweight Type: MCM Series Rigid Type: MCH Series 2 All-In-One Structure The all-in-one structure integrates a ball screw, linear guide and support bearings into a single unit to significantly reduce design and installation time. Multiple datum planes, the bottom and a lateral side of the rail, facilitate highly accurate installation. A wide selection of fine to high helix leads is available. 3 Long Term, Maintenance-Free Operation Use of NSK K1 TM Lubrication Unit and grease maintains smooth lubricating performance for long periods in mechanical environments where lubrication is difficult to apply, where use of oil is not permitted because of hygienic issues or where the mechanical equipment requires a high degree of washing out. NSK K1 TM Lubrication Unit is available for food processing machines and medical equipment. Grease for clean environments and for general machinery is available. 4 Superb Anti-Rust Capability Rust-resistant, low temperature chrome plating used on bodies and sliders is a standard feature. Low temperature fluoride chrome plating provides increased rust protection. Quick Delivery Selected sizes are available within 4 week delivery time. All standard accessories are available within 4 week delivery time as well. Order quantity is limited to pieces. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Monocarrier TM Classification and Series 1.2 Classification and Series Table 1-1 Lightweight Beam Rigidity Moment Rigidity MCM Series MCH Series = Excellent Performance = Good Performance (MCM Series Cross-Sections) Fig. 1-1 Fig. 1-1 6 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Accuracy Long Stroke Size Variation = Excellent Performance = Good Performance (MCH Series Cross-Sections) Fig. 1-2 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 7

Monocarrier TM Optional Components 1.3 Optional Components MCM Series Combining Bracket Fig.1-3 Assembly Optional Components for MCM (example) 1 Sensor unit: Sensors, sensor mounting parts and a sensor unit are available in a set When a sensor unit is used, the full cover unit cannot be used. 2 Sensor rail: Rail for sensor mounting is available. 3 Cover unit: Top cover or full cover (includes top cover and side cover) is available. 4 Motor mounting brackets are available for a variety of models. Bracket for combining actuators into 2-axis mechanism. When bracket is used, the full cover unit cannot be used. NSK can assemble optional components upon request. MCH Series Fig. 1-4 Assembly Optional Components for MCH (example) 1 Sensor unit: Sensors, sensor mounting parts and a sensor unit are available in a set. 2 Sensor rail: Rail for sensor mounting is available. 3 Cover unit: Top cover (includes spacer plate and spacer for simple support side) is available. 4 Intermediate plate for motor mounting available for a variety of models. NSK can assemble optional components upon request. 8 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

1.4 Selection of Monocarrier TM 1.4.1 Procedures for Selecting Monocarrier TM Select a reference type of Monocarrier TM based on stroke and rigidity (Refer to Fig. 1-6, 1-7). Select a ball screw lead referring to "1.4.3 Maximum Rotational Speed" so that the rotational speed does not exceed the limit. Study the loads to be applied to the linear guide and obtain the equivalent load (Fe), substituting them for equation 1 or 2 on Page 16. Obtain the mean effective load (Fm), substituting them for equation 3 on Page 17, then calculate the life. Study the loads to be applied to the ball screw and support unit. Obtain the mean effective load (Fm), substituting them for equation 3 on Page 17, then calculate the life. Fig. 1-6 MCM Series Rigidity in Radial Direction 1.4.2. Rigidity Rigidity of Rail Fig. 1- Table 1-2 Rigidity of Rail Geometrical moment of inertia x 4 (mm 4 ) Center of gravity Mass (kg/0mm) Model No. Ix Iy e w MCM02 0.097 1.32 3.3 0.11 MCM03 0.300 3.30 4. 0.18 MCM0 0.780 11.40 6.0 0.31 MCM06 2.140 26. 7.0 0.7 MCM08.900 81.00 9.2 0.88 MCM 1.600 219.00 12.2 1.2 MCH06 6.00 38.20.8 0.67 MCL06 2.80 29.60 7.8 0.6 MCH09 28.700 172.00 1. 1.48 MCH 4.000 307.00 18.0 1.93 Fig. 1-7 MCH Series Rigidity in Radial Direction Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 9

Monocarrier TM Selection 1.4.3 Maximum Speed Maximum Speed of MCM Series Maximum speed of Monocarrier TM is determined by the critical speed of ball screw shaft and the d n value. Do not exceed the maximum speeds in the table below. Table 1-3 MCM02 single slider MCM03 single slider MCM0 single slider MCM0 double slider MCM06 single slider MCM06 double slider Ball screw lead 1 2 1 2 12 20 30 20 20 20 Stroke Rail length L2 Maximum speed (mm/s) 0 0 0 10 0 10 200 0 0 0 10 0 10 200 0 11 0 190 0 10 240 0 11 0 190 0 10 240 0 190 00 20 340 0 190 600 20 340 0 180 20 200 330 0 180 00 600 730 300 430 1,000 600 730 300 430 2,00 400 30 00 630 2,200 600 730 1,600 60 280 00 730 2 430 1,000 730 0 190 20 00 640 0 190 00 600 740 700 840 490 800 940 390 300 440 1,000 600 740 700 840 980 800 940 770 1 340 20 4 640 1 340 00 6 840 7 940 490 2 440 1,000 6 840 7 940 980 MCM08 single slider MCM08 double slider MCM single slider MCM double slider Ball screw lead 20 30 20 20 30 20 Stroke Rail length L2 Maximum speed (mm/s) 0 220 20 200 370 0 270 00 700 870 800 970 390 300 470 1,000 700 870 800 970 780 400 70 2,00 00 670 600 770 1,860 700 870 1,42 80 370 00 680 970 180 470 1,000 680 970 200 380 00 800 980 900 1,080 440 1,000 1,180 360 300 480 1,000 800 980 900 1,080 880 1,000 1,180 720 00 680 2,00 600 780 700 880 1,920 800 980 1, 70 380 00 670 980 870 1,180 440 170 480 1,000 670 980 870 1,180 880 Note: When operating a Monocarrier TM near critical speed or exceeding maximum speed in the table, please consult NSK. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Maximum Speed of MCH Series Maximum speed of Monocarrier TM is determined by the critical speed of ball screw shaft and the d n value. Do not exceed the maximum speeds on the table below. Table 1-4 MCH06 MCL06 single slider MCH06 double slider MCH09 single slider MCH09 double slider Ball screw lead 20 20 20 20 Stroke Rail length L2 Maximum speed (mm/s) 0 10 20 00 600 0 10 00 00 600 0 10 1,000 00 600 0 300 20 400 600 0 300 00 400 600 0 300 1,000 400 600 200 340 20 600 740 800 940 2 200 340 00 600 740 800 940 4 200 340 1,000 600 740 800 940 830 10 440 20 60 940 10 440 00 60 940 10 60 440 940 1,000 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ MCH single slider MCH double slider Ball screw lead 20 20 Stroke Rail length L2 400 80 Maximum speed (mm/s) 00 800 980 900 1,080 440 1,000 1,180 360 1,0 1,280 300 1,200 1,380 20 ~ ~ 400 80 1,000 800 980 900 1,080 870 1,000 1,180 720 1,0 1,280 600 1,200 1,380 20 80 00 70 1,080 80 1,180 480 90 1,280 390 1,00 1,380 320 ~ ~ ~ ~ 20 80 1,000 70 1,080 80 1,180 90 90 1,280 780 1,00 1,380 60 ~ ~ Note: When operating a Monocarrier TM near critical speed or exceeding maximum speed in the table, please consult NSK. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 11

Monocarrier TM Selection 1.4.4 Accuracy Grade The accuracy grade of Monocarrier TM standard inventories is high grade (H), except for lead 1 and 2 mm of MCM02 and MCM03. When you require strokes longer than 1,200 mm, please consult NSK about the accuracy grade. Table 1- Grade High grade Precision (Unit: μm) Stroke Repeatability Running Parallelism (vertical) Backlash Repeatability Positioning accuracy Running Parallelism (vertical) Backlash ~200 14 20 8 ~400 16 2 ~600 20 30 12 + 20 or less + 3 ~700 23 30 1 3 or less ~1,000 23 3 1 ~1,200 30 40 20 1.4. Stroke and Ball Screw Lead 1.4..1 MCM Series Standard Combinations of Stroke and Ball Screw Lead Table 1-6 Single Slider ( mark: Standard Product) Model No. MCM02 MCM03 MCM0 MCM06 MCM08 MCM lead stroke 0 0 10 200 20 300 400 00 600 700 800 900 1,000 (Unit: mm) 1 2 1 2 12 20 30 20 20 30 20 30 Table 1-7 Double Slider ( mark: Standard Product) Model No. MCM0 MCM06 MCM08 MCM lead stroke 60 70 80 1 160 170 180 2 270 280 3 370 380 4 470 480 70 80 6 670 680 7 870 (Unit: mm) 20 20 20 20 Please consult NSK about double slider of MCM02 and MCM03. 12 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

1.4..2 MCH Series Standard Combinations of Stroke and Ball Screw Lead Table 1-8 Single Slider ( mark: Standard Product) (Unit: mm) ( mark: Standard Product) Model No. MCH06 MCH09 MCH lead stroke 0 0 200 300 400 00 600 700 800 900 1,000 1,0 1,200 20 20 20 Table 1-9 Double Slider Model No. MCH06 MCH09 MCH lead stroke 0 10 200 20 300 30 400 40 0 60 70 90 1,00 (Unit: mm) 20 20 20 Table 1- Limitations MCM Series MCH Series Model No. Lead Slider Stroke MCM02 1,2 Single 10 MCM03 1,2 Single 10,12 Single 30 MCM0,,20,30* Single 900 Double 8 MCM06,,20 Single 1,000 Double 9 MCM08,,20,30* Single 1,000 Double 880 MCM,20,30* Single 1,800 Double 1,670 MCH06,,20 Single 600 Double 00 MCH09,,20 Single 1,000 Double 80 MCH,20 Single 1,800 Double 1,60 MCL06,,20 Single 00 *) Applicable only to single slider Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 13

Monocarrier TM Selection 1.4.6 Basic Load Rating 1.4.6.1 MCM Series Basic Load Rating Table 1-11 Basic Load Rating Model No. MCM02 MCM03 MCM0 MCM06 MCM08 MCM Lead Basic dynamic load rating (N) Basic static load rating (N) Shaft dia Support unit Limit d Rated running Ball screw Ca Linear guide C Support unit Ca Ball screw C0a Linear guide C0 load (N) distance La (km) 1 340 (High grade) 4,9 1 (High grade) 40 (Precision) 61 (Precision) Ø6 61 2 340 (High grade) 3,900 2 (High grade) 40 (Precision) 61 (Precision) 2,120 490 1 Ø6 73,900 1 1,230 4,900 2 73 8,60 2,670 2 Ø8 1,230 6,20 12 1,230,880 12 1,690 6,620 1,040 3,760 1,600 6,3 20 Ø12 2,260 2,260 12,400 9,80 4,400 20 3,780 3,780,900 1,40 30 3,260 8,600 6,0 30,400 2,730 Ø16 7,3 2,200 13,00 6,0 17,000 2,730 Ø1 7,060 20,000 12,700 20 4,60 1,900 20 7,70 Ø16 7,3 30,800 13,00 20 Ø1 7,060 4,60 24,400 19,400 7,0 20 12,700 7,70 22,800 3,040 30,070 16,930 30 8,730,900 33,00 21,700 20 Ø20 7,060 26,600 7,600 20 12,700 29,400 3,380 30 11,700 23,200 30 22,700 Notes Basic dynamic and static load ratings indicate the values for one slider. Basic dynamic load rating of the linear guide is the load of perpendicular direction to the axis that allows 90% of a group of the same Monocarriers to operate, "Rated running distance" in the table, that is equivalent to 1 million revolutions of the ball screw and the support unit under the same condition without causing flaking by rolling contact fatigue. Basic dynamic load rating of the ball screw is a load-to-axial direction that allows 90% of ball screws of a group of the same Monocarriers to rotate 1 million revolutions under the same condition without causing flaking by rolling contact fatigue. Basic dynamic load rating of the support unit is a constant load-to-axial direction that allows 90% of support units of the same group of Monocarriers to rotate 1 million revolutions under the same condition without causing flaking by rolling contact fatigue. Basic static load rating is a load that results in combined permanent deformations at the contact points of balls and ball grooves of respective part, which is 0.01% of the diameter. Table 1-12 Basic Static Moment Load of Linear Guide Model No. Lead Slider Basic static moment (N m) Rolling MRO Pitching MPO Yawing MYO MCM02 1, 2 Single 24 8 8 MCM03 1, 2 68 28 28 Single, 12 92 1 1 MCM0,, 20, 30* Single 229 89 89 Double 4 76 76 MCM06,, 20 Single 41 174 174 Double 82 1,220 1,220 MCM08,, 20, 30* Single 770 300 300 Double 1,40 2,00 2,00 MCM, 20, 30* Single 1,170 42 42 Double 2,340 2,940 2,940 Basic static moment of double slider is a value when two sliders equipped with NSK K1 Lubrication Units are butted against each other. The basic static moment is the value when a rolling contact pressure of balls exceeds 4,000N/mm 2. If operating under extreme load conditions, please consult NSK for estimation of fatigue life. Fig. 1-8 14 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

1.4.6.2 MCH Series Basic Load Rating Table 1-13 Basic Load Rating Model No. MCH06 (MCL06) MCH09 MCH Lead 20 20 20 Shaft dia d Ø12 Ø1 Ø20 Basic dynamic load rating (N) Basic static load rating (N) Support unit Limit Rated running Ball screw load (N) Ca Linear guide C Support unit Ca Ball screw C0a Linear guide C0 distance La (km) 3,000 (High grade),4 (High grade) 22,800 3,760 (Precision) 6,3 (Precision) 1,930 (High grade) 3,160 (High grade) 18,0 4,400 2,260 (Precision) 3,780 (Precision) 16,300 1,40 1,930 (High grade) 3,160 (High grade) 14,400 20 2,260 (Precision) 3,780 (Precision) 6,820 (High grade) 13,200 (High grade) 40,600 7,0 (Precision) 13,000 (Precision),1 (High grade) 9,290 (High grade) 32,200 7,0 7,060 (Precision) 12,700 (Precision) 30,00 3,040 3,290 (High grade),620 (High grade) 2,00 20 4,60 (Precision) 7,70 (Precision) 8,230 (High grade) 17,0 (High grade) 44,600,900 (Precision) 21,700 (Precision) 7,600,300 (High grade),300 (High grade) 3,400 20 7,060 (Precision) 12,700 (Precision) 42,000 3,380 Notes Basic dynamic and static load ratings indicate the values for one slider. Basic dynamic load rating of the linear guide is the load of perpendicular direction to the axis that allows 90% of a group of the same Monocarriers to operate, "Rated running distance" in the table, that is equivalent to 1 million revolutions of the ball screw and the support unit under the same condition without causing flaking by rolling contact fatigue. Basic dynamic load rating of the ball screw is a load-to-axial direction that allows 90% of ball screws of a group of the same Monocarriers to rotate 1 million revolutions under the same condition without causing flaking by rolling contact fatigue. Basic dynamic load rating of the support unit is a constant load-to-axial direction that allows 90% of support units of the same group of Monocarriers to rotate 1 million revolutions under the same condition without causing flaking by rolling contact fatigue. Basic static load rating is a load that results in combined permanent deformations at the contact points of balls and ball grooves of respective part, which is 0.01% of the diameter. Table 1-14 Basic Static Moment Load of Linear Guide Model No. MCH06 (MCL06) MCH09 MCH Slider Basic static moment (N m) Rolling MRO Pitching MPO Yawing MYO Single 33 133 133 Double 770 730 730 Single 890 38 38 Double 1,780 2,070 2,070 Single 1,460 6 6 Double 2,920 3,430 3,430 Basic static moment of double slider is a value when two sliders equipped with NSK K1 Lubrication Units are butted against each other. The basic static moment is the value when a rolling contact pressure of balls exceeds 4,000N/mm 2. If operating under extreme load conditions, please consult NSK for estimation of fatigue life. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 1

Monocarrier TM Selection 1.4.7 Estimation of Life Expectancy 1.4.7.1 Life of Linear Guide Study the load to be applied to the linear guide of Monocarrier (Fig. 1-9). The equivalent load (Fe) is determined by substituting equation 1 or 2 depending on the number of sliders. Single Slider 1 Fe = Y H F H + Y V F V + Y R ε R M R + Y P ε P M P + Y Y ε Y M Y... Double Slider 2 Fe = Y HF H + Y V F V + Y R ε Rd M R 2 2 + Y P ε Pd M P + Y Y ε Yd M Y... F H : Lateral direction load acting on the slider (N) F V : Vertical direction load acting on the slider (N) M R : Rolling moment acting on the slider (N m) M P : Pitching moment acting on the slider (N m) M Y : Yawing moment acting on the slider (N m) ε R, ε Rd : Dynamic equivalent coefficient to rolling moment ε P, ε Pd : Dynamic equivalent coefficient to pitching moment ε Y, ε Yd : Dynamic equivalent coefficient to yawing moment Refer to Table 1-1 about Dynamic equivalent coefficient. Y H, Y V, Y R, Y P, Y Y : 1.0 or 0. In equations 1 and 2 for obtaining equivalent load (Fe), among F H, F V, ε P M P, ε R M R, ε Y M Y, the maximum load is assumed to be 1.0 and others are to be 0.. Fig. 1-9 Direction of Load Table 1-1 Dynamic Equivalent Coefficient MCM03 Model No. MCM02 MCM0 MCM06 MCM08 MCM MCH06 MCL06 MCH09 MCH lead 1, 2 lead, 12 εr 9.2 79.4 79.4 2.6 4. 32. 27.8 48.3 34. 28.6 εp 174.0 113.9 84.2 81.3 6.1 48.8 4.2 7.1 47.9 41.0 εy 174.0 114.0 84.0 81.0 6.1 49.0 4.0 7.1 47.9 41.0 εrd 26.3 22.7 16.3 13.9 24.2 17.2 14.3 εpd.4 (12.2) 9.7 (11.) 7.6 (8.6) 7.1 (8.0) 11.4 (13.2) 8.11 (9.) 6.98 (7.82) εyd.4 (12.2) 9.7 (11.) 7.6 (8.6) 7.1 (8.0) 11.4 (13.2) 8.11 (9.) 6.98 (7.82) Note: Parenthesized figures are dynamic equivalent coefficient in case of the Monocarrier TM without NSK K1 TM lubrication unit. 16 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

In a case when the load acting on the slider may fluctuate (in general, M P, M Y may fluctuate with the acceleration/ deceleration of the slider), the mean effective load is determined by Eq. 3. 1.4.7.2 Life of Ball Screw (Support Unit) The mean effective load is determined from the axial loads. For calculation of the mean effective load, use Eq. 3. The life of the ball screw is calculated by Eq.. C [ ]3 a f W Fm L = 6... : Lead of ball screw L: Life of ball screw C a : Basic dynamic load rating of the ball screw (N) Fm: Mean effective load acting on the ball screw (N) f W : Load factor (Refer to Table 1-16) Fig. 1- Stepwise Fluctuating Load Travelling distance under the equivalent load Fe 1 : L 1 Travelling distance under the equivalent load Fe 2 : L 2 Travelling distance under the equivalent load Fe n : L n The life of the support unit is calculated by Eq.. If the life of the ball screw/support unit does not meet the required life, use a larger size Monocarrier TM. Upon calculations as mentioned above, the selection of the Monocarrier TM is completed. Fm = 3 1 (Fe 13 L 1 + Fe 23 L 2 +... Fe n3 L n )... 3 L Fm: Mean effective load of fluctuating loads L: Total travelling distance The life of the linear guide is calculated by Eq. 4 C L = L a... 4 [ ]3 f W Fm L: Life of the linear guide (km) Fm: Mean effective load acting on the linear guide (N) C: Basic dynamic load rating of the linear guide (N) L a : Travelling distance (km) f W : Load factor (Refer to Table 1-16) Table 1-16 Values of Load Factor fw Operating Conditions Load Factor fw At smooth operation with no mechanical shock 1.0~1.2 At normal operation 1.2~1. At operation with mechanical shock and vibrations 1.~3.0 When the estimated life does not meet the required life, the life of the linear guide is to be calculated again after the following measures are taken: 1. Change from the single slider type to double slider type. 2. Use a larger size Monocarrier TM. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 17

Monocarrier TM Example 1.4.8 Example of Life Estimation This section offers an example of how to estimate the life of the Monocarrier based on the life of each component. 3-1-2. Static safety factor: Divide the basic static load rating by the maximum load. F S = C 0 = C 0 = 17,000 =24.2 Fe Fe 2 700 Fig. 1-11 1. Use condition Stroke : 600mm Maximum Speed : 1,000mm/s Load Mass : W=kg Acceleration : g=9.8m/s 2 Setting Position : Horizontal Operating Profile : See above figure 2. Selection of Model Number (Interim Selection) First, select a greater ball screw lead since the maximum speed is 1,000mm/s. The interim selection is MCM06060H20K00, a single slider specification MCM06 that has a 600mm stroke, since the stroke is 600mm. 3-2. Ball Screw 3-2-1. Fatigue Life: Obtain the axial load of each stage of operation, referring to the operation profile, and then calculate the mean load. By the process above, i ) Constant speed Fe 1 =μ W g=0.01 9.8=0.98 i i ) Accelerating Fe 2 =Fe 1 +W=1 N iii) Decelerating Fe 3 =Fe 1 Wa=99 N Axial mean effective load Fm 3. Calculation 3-1. Linear Guide 3-1-1. Fatigue Life Multiply the result of the Eq. 1 by the dynamic equivalent coefficient (Table 1-1 single slider) to convert the load volume. From the above operation profile, i ) Constant speed Fe 1 =Y V F V =Y V W g =1 9.8= 98 N i i ) Accelerating Fe 2 =Y V F V +Y P ε P M P =0. 9.8+1 6.1 0.1 0=700 N iii) Decelerating Fe 3 =Y V F V +Y P ε P M P =0. 9.8+1 6.1 0.1 0=700 N Mean effective load Fm 3-2-2. Static safety factor: Divide the basic static load rating by the maximum axial load. F S = C 0a C = 0a 7,70 = =76.7 Fe Fe 2 1 3-2-3. Maximum rotational speed: According to the table of maximum rotational speed on page C7, MCM06 with 20mm lead and 600mm stroke is possible to operate under the maximum speed of 1,000mm/s. 3-3. Support Unit 3-3-1. Fatigue life: Use the axial load Fm = N, resulting from the calculation 3-2-1 (above). 18 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

3-3-2. Static safety factor: Divide the limit load by the maximum axial load. F S = C 0a C = 0a 2,730 = = 27.0 Fe Fe 2 1 3-4. Result MCM06060H20K00 Linear guide Ball screw Support unit Fatigue life 8.02 6. 1.9 km 6km 7km Static safety factor 24.2 76.7 27 In this case, the linear guide has the shortest fatigue life of the components. Therefore, the linear guide fatigue life is used as the life of the Monocarrier. The interim selection of MCM06060H20K00, that is chosen based on the use conditions, satisfies the required life. 4. Calculation 4-1. Linear guide 4-1-1. Fatigue life: Multiply the result of the Eq. 2) by the dynamic equivalent coefficient (Table 1-1 double slider) to convert the load volume. From operation profile (Fig. 1-12), the acceleration is 1 m/s 2. i ) Constant speed Fe 1 = Y P ε Pd M P + Y Y ε Yd M Y = 1 7.6 20 9.8 0.1 + 0. 7.6 20 9.8 0.1 = 298 N i i ) Accelerating Fe 2 = Y P ε Pd M P + Y Y ε Yd M Y = 1 7.6 20 (9.8 + 0.1) 0.1 + 0. 7.6 20 (9.8 + 1.0) 0.1 = 329 N iii) Decelerating Fe 3 = Y P ε Pd M P + Y Y ε Yd M Y = 1 7.6 20 (9.8 1.0) 0.1 + 0. 7.6 20 (9.8 1.0) 0.1 = 268 N Mean effective load Fm 1 Fm = 3 3 3 3 Fe 1 L1 + Fe 2 L2 + Fe 3 L3 L 1 = 3 3 3 3 298 30 + 329 12 + 268 12 600 = 300 N L = L a C f F w m 24 400 = 1. 2 300 = 3.11 6 km 3 3 4-1-2. Static safety factor: Divide the basic static load rating by the maximum load. Fig. 1-12 F S = C 0 = C 0 = 22 800 = 69.3 Fe Fe 2 329 4-2. Ball Screw 1. Use condition Stroke : 600 mm Maximum speed : 00 mm/s Load mass : W = 20 kg Acceleration : 9.8 m/s 2 Setting position : Horizontal Operating profile : See above figure 2. Selection of Model number (Interim Selection) Select a mm lead ball screw as the maximum speed is 00 mm/s. The interim selection is MCM08068HD00 as a double slider specification of MCM08 has 680 mm stroke, and the setting position is vertical. W (From the axis center) 0 Fig. 1-13 10 (From the axis center) 4-2-1. Fatigue life: Obtain the axial load of each stage of operation referring to the operation profile, then calculate the mean load. i ) Constant speed Fe 1 = W g = 20 9.8 = 196 N i i ) Accelerating Fe 2 = Fe 1 + W a = 196 + 20 1 = 216 N iii) Decelerating Fe 3 = Fe 1 W a = 196 20 1 = 176 N Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 19

Monocarrier TM Maintenance Axial mean effective load Fm ( ) Fm 3 1 Fe L Fe L Fe L L 1 1 2 2 3 3 = 3 1 3 3 3 196 30 + 216 12 + 176 12 600 = 197 N L = = C a f F w m ( ) 7 060 1. 2 197 = 2.66 km 3 6 3 6 4-2-2. Static safety factor: Divide the basic static load rating by the maximum axial load. F S = C 0a C = 0a 12 700 = = 8.7 Fe Fe 2 216 1. Maintenance 1..1 Maintenance Method 1. For a standard Monocarrier TM, we pack grease in the slider, linear guides and ball screw. 2. The Monocarriers are equipped with NSK K1 Lubrication Unit as a standard feature, allowing it to operate for years or,000km (whichever comes first) without any maintenance. However, replenishing the grease may extend its life substantially. 3. NSK K1 Lubrication Unit is ideal in environments where oily dust exists. However, the life may be shorter than the case described in section 2 (above). In this case, it may be necessary to replenish the grease more frequently. 4. Nozzle for NSK grease gun exclusive for the MCH Monocarrier TM is available as an option. NSK reference number: NSK HGP NZ8 4-3. Support unit 4-3-1. Fatigue life: Use the axial load Fm = 197 N, that is the result of above calculation 3-2-1. L = C a 6 = fw Fm = 2.70 km 3 3 7 0 1. 2 197 6 4-3-2. Static safety factor: Divide the limit load by the maximum axial load. F S = C 0a C = 0a 3 040 = =14.0 Fe Fe 2 216 4-4. Result MCM08068HD00 Linear guide Ball screw Support unit Fatigue life 3.11 6 km 2.66 km 2.70 km Static safety factor 69.3 8.7 14.0 Fig. 1-14 NSK HGP NZ8 Precautions for Handling 1. Please consult with NSK when the motor is coupled to the ball screw using a pulley because there is a restriction on the allowable load to the end of the ball screw shaft. 2. To extend the high performance of NSK K1 Lubrication Unit, please observe the following: 1. Temperature range Ambient temperature: 0 C Max. instantaneous temperature: 80 C 2. Use of chemicals Never leave a Monocarrier TM in close proximity to grease - removing organic solvents such as hexane or thinner. Never immerse it in an anti-rust solvent that contains kerosene. Note: Other oils, such as water-based and oil-based cutting oil and grease, do not cause any problems. 20 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

1..2 NSK K1 TM Lubrication Unit (2) High-Speed Durability Test of Ball Screws Without Lubricant NSK K1 Lubrication Unit exhibits outstanding features, confirmed by abundant experimental data, along with the proven performance of linear guides and ball screws that are equipped with NSK K1 Lubrication Unit. (1) High-Speed Durability Test of Linear Guides Without Lubricant Results of high-speed durability testing of linear guide without lubricant are shown in Fig. 1-1. While the linear guide cannot be operated without lubricant for even short periods without damage, the installation of the NSK K1 Lubrication Unit permits the linear guide to run over 2,000 km without any problem. Conditions No lubricant NSK K1 Lubricant Unit Test piece: LH30AN (Preload Z1) Speed: 3.3 m/s Stroke: 1,800 mm All grease removed All grease removed + NSK K1 Results of high-speed durability testing of ball screw without lubrication are shown in Fig.1-16. While the ball screw cannot be operated without a lubricant at 8. km without damage, the installation of the NSK K1 Lubrication Unit permits the ball screw to run over 21,000 km without any problem. Conditions No lubricant NSK K1 Lubrication Unit Test piece: BS2020 (ball screw) Shaft diameter: 20 mm Lead: 20 mm Load: none Speed: 1.3m/s (4,000 min 1) Stroke: 600 mm All grease removed All grease removed + NSK K1 Fig. 1-16 Results of High-Speed Durability Test of Ball Screws Without Lubricant Fig. 1-1 Results of High-Speed Durability Test of Linear Guides Without Lubricant NSK K1 Lubrication Unit for food processing is available. For safety equipment of food processing and medical care, NSK provides the Monocarrier TM equipped with special NSK K1 Lubrication Unit that is made of compatible material under FDA regulations. Dimensions are the same as the standard NSK K1 Lubrication Unit and special handling care is not required. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 21

Monocarrier TM Clean Grease LG2 NSK Clean Grease LG2 Specification Features This grease was developed by NSK to be exclusively used for linear guides and ball screws in clean rooms. Compared to the fluoride grease that is commonly used in clean rooms, LG2 has several advantages such as: higher in lubrication function, longer lubrication life, more stable torque (resistant to wear) and higher rust prevention. In dust generation, LG2 is more than equal to fluoride grease in keeping dust volume low. Since the base oil is not a special oil but a mineral oil, LG2 can be handled in the same manner as general grease. at the intervals specified for each model and take the maximum difference of the average values determined at respective positions as the measured value. 1.7.2 Repeatability Repeat positioning at any point seven times from the same direction to measure the stopping position and determine one half of the maximum difference of readings. Repeat this measurement over the entire travel distance at the intervals specified for each model. Take the maximum difference of the determined values as the measured value. Express one half of the maximum difference with a plus or minus + sign. Applications LG2 is lubrication grease for rolling contact machine components such as linear guides and ball screws for processing equipment for semiconductors and LCD which require a highly clean environment at normal pressures at normal temperatures. It cannot be used in a vacuum environment. Nature Thickener Lithium soap base Base oil Mineral oil + Synthetic hydrocarbon oil Consistency 207 Dropping point 200 C Volume of evaporation 1.40% (99 C, 22hr) Copper plate corrosion test Satisfactory (Method B, 0 C, 24hr) Oil separation 0.8% (0 C, 24hr) Base oil kinematic viscosity 30mm2/s (40 C) 1. 7 Characteristics and Evaluation Method 1.7.1 Positioning Accuracy Perform positioning successively from the reference position in a specific direction. Measure the difference between the actual and desired travel distances for each point from the reference position. Repeat this measurement seven times to determine the average value. Measure the average value over the entire travel distance Fig. 1-18 1.7.3 Running Parallelism (Vertical Direction) We specify the parallelism of slider to the datum bottom surface of rail. An indicator is moved in the axial slider making its stylus slightly touching on the rail bottom surface. The slider is moved in the axial direction for the checking. We define the total indicator reading as the running parallelism. During the checking, the rail is not fixed to the table base. Please be aware that, in general application, the rail is fixed to the machine base, and thus the wobbly rolling error will be added to the running parallelism. 22 Fig. 1-17 Fig. 1-19 Setting of Indicator Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

1.8 Special Specifications Please consult NSK if your requirement is not in the standard products. (1) Surface Treatment Fluoride low temperature chrome plating Note: Ball screw parts (including low temperature chrome plating.) (2) Special Machining (Processing) i) Shaft end processing Key way processing One flat or two flats processing ii) Dowel pin hole processing Slider Rail Note: Due to interference with the internal construction, the position of dowel pin hole is limited. Please consult with NSK about the pin position. (3) Motor Bracket and Intermediate Plate for Motor Mounting (4) Reversed Motor Mount The reversed motor mount is available. Please consult NSK. Notes: 1) We do not check motor running condition. 2) Please refer to the bottom of page C8 to C87 for the configuration of reversed motor mounting of the MCH series. () Right and Left Turn Thread Right and left turn ball screw is available. Please consult with NSK for available leads. (6) Ball-Screw-Less Specification (Only Linear Guide Part) A ball-screw-less rail part with the same cross section of standard Monocarriers is available for a driven linear guide. It will lessen a height adjustment work compared with a construction with two standard Monocarriers. Note: Height grinding adjustment of the two axes assembly is not available. We can provide motor mounting brackets and intermediate plates that are not listed in the catalog. We can attach motor upon request if the motor is provided or specified in advance. Note: Motion check of the motor is unavailable. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 23

Monocarrier TM Sensor Specification 1.9 Sensor Specification 1.9.1 Proximity Switch Use of OMRON E2S-W13, E2S-W14 Item E2S-W13 type E2S-W14 type Setting surface Front face Sensing distance mm ± 1% Setting distance 0 to 1.2mm Differential travel % max. of sensing distance Detectable object type Ferrous metal Standard sensing object Iron, 12 x 12 x 1mm Response frequency 1 khz min. Power supply voltage (operating voltage range) 12 to 24 V DC, ripple (p p): % max. ( to 30 V DC) Current consumption 13 ma max. at 24 V DC with no load Control output (Switching capacity) NPN open collector output 0 ma max. (30 V DC max.) Control output (Residual voltage) 1.0 V max. with a load current of 0 ma and a cable length of 1 m Indicator Operation indicator (orange) Operating status (with sensing object approaching) NO (open contact) NC (closed contact) Wire lead length 00 mm Notes: 1. Do not make a wrong connection. 2. Please contact NSK for PNP output type. Movement Mode Output Type Type Time Chart Output Circuit Setting surface 8.4.9 2.6.9 2 2.3 E2S-W13 (Normally open contact) E2S-W14 (Normally close contact) The external appearances are the same. Indicator 22.3. 6.4 2.1 24 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 1 19

1.9.2 Photo Sensor Use of OMRON EE-SX674 and EE-SX674P Item EE-SX674 type (NPN) EE-SX674P type (PNP) Slot width mm Standard reference object Opaque: 2 x 0.8mm Differential distance 0.02mm Light source GaAs infrared LED with a peak wavelength of 940 nm Indicator (without detecting object) ON GaP red LED (peak emission wavelength: 690 nm) Supply voltage to 24VDC ±%, ripple: (p-p) % max. Current consumption 3 ma max. Control output NPN open collector output models: At to 24 VDC: 0 ma load current Response frequency 1kHz max. (3kHz typ.) Ambient illumination Fluorescent light: 1,000 x max. Ambient temperature Operating: -2 C to C (-13 F to 131 F) Storage: -30 C to 80 C (-22 F to 176 F) Ambient humidity Operating: to 8%RH Storage: to 9%RH Connecting method Notes: 1. Do not make a wrong connection. 2. Please contact NSK for PNP output type. EE-01/06 Connectors; soldering terminals Type Movement Mode Time Chart Connection Terminal Output Circuit 6.8 21. 2-j3. hole EE-SX674 (Sensor) EE-01 (Connector) A connector is mounted to the sensor in the right figure. Indicator red 6.9 7 3. Optical axis 2.6 1. 4 13 2.9 7 13.6 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 2

MCM Series Lightweight Type 26 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

2.1 MCM Series Reference Number Coding... 28 2.2 MCM Series Dimension Table of Standard Products MCM02... 29 MCM03... 30 MCM0... 33 MCM06... 36 MCM08... 39 MCM... 42 2.3 MCM Series Optional Accessories 2.3.1 Sensor Unit... 4 2.3.2 Cover Unit... 49 2.3.3 Motor Bracket By NEMA Size... 1 By Standard Size... 8 2.3.4 Combining Brackets... 74 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 27

MCM Series Lightweight Type 2 MCM Series 2.1 MCM Series Reference Number Coding [Body] MC M 08 040 H K 0 0 MONOCARRIER SERIES NOMINAL SIZE STROKE ACCURACY GRADE BALL SCREW LEAD SLIDER SPECIFICATION GREASE SPECIFICATION NSK MANAGEMENT NUMBER MC: Monocarrier M: MCM Series Rail width, unit: mm Unit: mm H: High Precision P: Precision Grade Unit: mm K: Single slider D: Double slider 0: Standard AS2 B: Clean Grease LG2 [With Optional Accessories] MC E 08 040 H K 0 0 K 0 0 0 OPTIONAL ACCESSORIES NSK MANAGEMENT NUMBER SENSOR UNIT COVER UNIT MOTOR BRACKET E: With Optional Accessories Note: Optional components are available separately. Table 2-1 Sensor Unit (See pages 4-48) Reference Number Code Specification Reference Number 0 N/A 1 Proximity switch (normally close contact 3 pieces) MC SRxx 2 Proximity switch (normally open contact 3 pieces) MC SRxx 11 3 Proximity switch (normally open contact 1 piece, normally close contact 2 pieces) MC SRxx 12 4 Photo sensor 3 piece MC SRxx 13 Table 2-2 Cover Unit (See pages 49-0) Reference Number Code Specification Reference Number 0 N/A 1 With top cover MC CVxxxxx 01 (02) 2 Full cover MC CVxxxxx 00 Note xx: Reference number Note : Monocarrier "-02" is only used for MCM03. Note xxxxx: Reference number and stroke number Table 2-3 The Reference Number of Motor Bracket (See pages 1-72) Reference Reference Number Number Code MCM03 MCM0 MCM06 MCM08 MCM 0 N/A N/A N/A N/A N/A 1 MC-BK03-146-00 MC-BK0-14-00 MC-BK06-14-00 MC-BK08-14-00 MC-BK-170-00 2 MC-BK03-148-01 MC-BK0-146-00 MC-BK06-146-00 MC-BK08-146-00 MC-BK-170-01 3 MC-BK03-231-00 MC-BK0-148-00 MC-BK06-148-00 MC-BK08-160-00 MC-BK-190-00 4 MC-BK0-160-00 MC-BK06-160-00 MC-BK08-170-00 MC-BK-270-00 MC-BK0-20-00 MC-BK06-170-00 MC-BK08-170-01 6 MC-BK06-170-01 MC-BK08-190-00 7 MC-BK06-20-00 MC-BK08-20-00 8 MC-BK08-270-00 28 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

2.2 MCM Series Dimension Table of Standard Products MCM02 2 n-j3. drill thru j6 c bore to bottom thickness 1.0 (M3 Hexagon socket button head screw: fixed to specified height 1.7 mm) A 4. 11. 14 2-M2 0.4 Tap depth 2. countersunk 4-M3 0. Tap depth 3 2-M2 0.4 Tap depth 3. 28 14 20.8 12 16 22 20 1 Cross-section A-A 2-M2 0.4 Tap depth 4 11 14 14. 7. A 2-NSK K1 G : 2 L3 = (n-1) 0 2 1-M2 0.4 Tap depth 4 (both side) K1=4 9. 42 23 9. 6 1 K1=4 (G : 2) 7. 4 2-j3.4 drill thru j7. c bore to bottom thickness (opposite aspect) 28 2 1-M2 0.4 Tap depth 4 (both side) 21 0 0.014 j3h8 3. 21. 22 0. 6 2 L2 2. 9 1. (6.) 7 13. 0 0.018 j16h7 0. L1 Reference number MCM0200H01K MCM0200P01K MCM0200H02K MCM0200P02K MCM020H01K MCM020P01K MCM020H02K MCM020P02K MCM0201H01K MCM0201P01K MCM0201H02K MCM0201P02K Nominal stroke Stroke limit 0 8 0 8 10 18 Ball screw lead 1 2 1 2 1 2 Body length L1 L2 L3 No. of mounting holes n Inertia -7 (kg m 2 ) Mass (kg) 128. 0 0 2 0.93 0.26 178. 10 0 3 1.36 0.32 228. 200 10 4 1.81 0.39 Ball screw lead Monocarrier dynamic torque specification (N cm) High grade Precision 1 2 0.1~1.3 0.2~ 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) Rated running d Ball screw Ca Linear guides C Support unit Ca Ball screw C0a distance La (km) 340 (High grade) (High grade) 1 4,9 1 40 (Precision) 61 (Precision) Ø6 61 340 (High grade) (High grade) 2 3,900 2 40 (Precision) 61 (Precision) Linear guides C0 Support unit Load limit (N) 2,120 490 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 24 8 8 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 29

MCM Series Lightweight Type MCM03 Accuracy Grade: Precision (P) Dimension of MCM03 (Single Slider) Reference number Nominal stroke Stroke limit (K1 is not equipped) Ball screw lead Body length L1 L2 G L3 n No. of mounting holes Inertia - MCM0300P01K00 1 0.01 0 6 (66) 160 11 18 80 2 MCM0300P02K00 2 0.016 MCM030P01K00 1 0.021 0 131 (141) 23 190 1 160 MCM030P02K00 2 0.022 MCM0301P01K00 1 0.02 10 181 (191) 28 240 20 200 6 MCM0301P02K00 2 0.026 Bolt hole pitch L 3 on the items marked with is 80 mm. (kg m 2 ) Mass (kg) 0.6 0.7 0.8 Monocarrier dynamic torque specification (N cm) Ball screw lead 1 0.2~1.7 2 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. 4. Optional spacer is required when cover unit or sensor unit for MCM03 with the lead of 1 or 2mm. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) Rated running d Ball screw Ca Linear guides C Support unit Ca distance La (km) 1 73,900 1 Ø6 2,670 2 73 8,60 2 Ball screw C0a Linear guides C0 Support unit Load limit (N) 1,230 4,900 1,040 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 68 28 28 30 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM03 A Accuracy Grade: High Grade (H) 2-M3 0. Tap depth 2 n nj4. drill thru j7. c'bore to bottom thickness 1. 2-Grease fitting 4-M4 0.7 Tap depth 2-M3 0. Tap depth 4 18 32 18 16 2 16 26 40 2-NSK K1 2-M3 0. 80 for reference number with * Tap depth 3 4 G L3 = (n 1) 40 Cross-section A-A L3 = (n 1) 80 for reference number with * 71 A 46 (G) 4 2-M3 0. Tap depth 24 11. 24 6 2 1-M3 0. Tap depth (both side) 4 K1= 8 30 K1= 2 2-M3 0. Tap depth (both side) 6. 7 0 0.008 0 0.021 jh6 j22h7 4-M3 0. Tap depth 6 (thru 4) 9 7 34 2 17 12 23 3.1 24 18 26 13 33 (0.) 9 L2 1. (7.) 18. 17. 36 (0.) 22 33 34 L1 Dimension of MCM03 (Single Slider) Reference number No. of Nominal stroke Stroke limit Ball screw lead Body length mounting holes Inertia - (without K1 TM ) (kg m 2 ) Mass (kg) L1 L2 G L3 n *MCM0300HK00 69 0.08 0 18 140 30 80 2 *MCM0300H12K00 (79) 12 0.097 0.6 MCM030HK00 119 0.092 0 23 190 1 160 MCM030H12K00 (129) 12 0.9 0.7 MCM0301HK00 169 0. 10 28 240 20 200 6 MCM0301H12K00 (179) 12 0.122 0.8 MCM03020HK00 200 219 33 290 2 240 7 0.118 0.9 MCM03020H12K00 (229) 12 0.13 MCM0302HK00 20 269 38 340 30 280 8 0.131 1.0 MCM0302H12K00 (279) 12 0.147 Note: Bolt hole pitch L 3 on items marked with * is 80 mm. Monocarrier dynamic torque specification (N cm) Ball screw lead 0.3~3.0 12 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) Rated running d Ball screw Ca Linear guides C Support unit Ca distance La (km) 1,230 6,20 Ø8 2,670 12 1,230,880 12 Ball screw C0a Linear guides C0 Support unit Load limit (N) 1,690 6,620 1,040 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 92 1 1 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 31

MCM Series Lightweight Type MCM03 2-M3 0. Tap depth A 2 n-j4. drill thru j7. c bore to bottom thickness 1. 2-M3 0. Tap depth 3 4-M4 0.7 Tap depth 2-Grease fitting 2-NSK K1 Accuracy Grade: High Grade (H) 27. 4 G A 40 80 for reference number with * L3=(n-1) 40 L3 = (n 1) 80 for reference number with * (G) 4 2-M3 0. Tap depth 1 2-M3 0. Tap depth (both side) 4 K1= 3.1 70 46 8 30 17 12 23 K1= 1 2-M3 0. Tap depth (both side). 4-M3 0. Tap depth 6 (thru 4) 26 27. 18 34 7 18 32 18 16 2 16 Cross-section A-A 27. 9 jh6 j22h7 14. 8 8 33 (0.) 9 L2 L1 1. (7.) 18. 17. 36 (0.) (0.) 22 33 34 Dimension of MCM03 (Single Slider) Reference number Nominal stroke Stroke limit (without K1 TM ) Ball screw lead Ball screw diameter Body length No. of mounting holes Inertia -4 \ (kg m 2 ) L1 L2 G L3 n MCM0300H1K00 0 70 (80) 18 140 30 80 2 0.183 0.67 MCM030H1K00 0 120 (130) 23 190 1 160 0.222 0.77 MCM0301H1K00 10 170 (180) 1 Ø 28 240 20 200 6 0.260 0.87 MCM03020H1K00 200 220 (230) 33 290 2 240 7 0.298 0.97 MCM0302H1K00 20 270 (280) 38 340 30 280 8 0.336 1.07 Bolt hole pitch L 3 on the items marked with is 80 mm. Mass (kg) Monocarrier dynamic torque specification (N cm) Ball screw lead 1 0.3~.6 1. Frictional resistance of NSK K1 is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. 4. When a cover unit is added, an optional spacer plate is required. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a Linear guides C0 Support unit Load limit (N) 1 Ø 1,760,440 2,670 1 2,680 6,620 1,040 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 92 1 1 32 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM0 2-M3 0. Tap depth 2 n-j4. drill thru j7. c'bore to bottom thickness 2 2-NSK K1 4-M4 0.7 Tap depth 6 2-M3 0. Tap depth Accuracy Grade: High Grade (H) 14 40 28 14 1 0 L3 = (n 1) 0 (1) 2-M4 0.7 Tap thru 2 3-M3 0. Tap depth (both side) 2-Grease fitting K1=6.8 98.6 0 30 12 20 12 2 4-M3 0. Tap depth (both side) 2 2-M3 0. K1=6.8 Tap depth (both side) 6 0 0.008 j6h6 4-M4 0.7 Tap depth 8 (thru 6) 49 31 30 7 7 8 16 L2 L1 13 4 2 1-M3 0. Tap depth 4 (both side) 1 (7) 24 18 42 0 0.02 j32h7 40 18 27 19 14 38 48 48.6 20 Dimension of MCM0 (Single Slider) Reference number Nominal stroke Stroke limit (without K1 TM ) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -4 MCM000H0K00 0.02 MCM000HK00 0 80 (9) 232 180 10 4 0.03 MCM000H20K00 20 0.073 MCM00H0K00 0.031 MCM00HK00 0 130 (14) 282 230 200 0.04 MCM00H20K00 20 0.078 MCM001H0K00 0.036 MCM001HK00 10 180 (19) 332 280 20 6 0.046 MCM001H20K00 20 0.084 MCM0020H0K00 0.042 MCM0020HK00 200 230 (24) 382 330 300 7 0.01 MCM0020H20K00 20 0.089 MCM002H0K00 0.047 MCM002HK00 20 280 (29) 432 380 30 8 0.07 MCM002H20K00 20 0.09 (kg m 2 ) Mass (kg) 1.4 1.8 2.0 2.2 Monocarrier dynamic torque specification (N cm) Ball screw lead 1.0~4.8 1.1~.8 20 ~7.9 30 1.8~11.1 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a 3,760 1,600 6,3 2,260 12,400 4,400 3,780 Linear guides C0 Support unit Load limit (N) Ø12,900 20 2,260 9,80 20 3,780 30 3,260 8,600 6,0 30,400 2,730 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 229 89 89 1,40 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 33

MCM Series Lightweight Type MCM0 2-M3 0. Tap depth 2 n-j4. drill thru j7. c'bore to bottom thickness 2 2-NSK K1 4-M4 0.7 Tap depth 6 2-M3 0. Tap depth Accuracy grade: High grade (H) 14 40 28 14 6 1 1 6 30 4-M3 0. Tap depth (opposite aspect) 2-M4 0.7 Tap thru 4. 7 7 8 Dimension of MCM0 (Single Slider) G:1 0 2 3-M3 0. Tap depth (both side) 2-Grease fitting K1=6.8 16 L3 = (n 1) 0 L2 98.6 0 30 12 20 12 L1 2 4-M3 0. Tap depth (both side) 2 2-M3 0. K1=6.8 Tap depth (both side) 13 4 2 1-M3 0. Tap depth 4 (both side) (G:1) 6 4-M4 0.7 Tap depth 8 (thru 6) 0 0.008 1 (7) 1 2 23 48 j8h6 0 0.02 j32h7 40 4-M3 0. Tap depth (opposite aspect) 18 27 19 14 49 31 6 1 1 6 38 48 48.6 4. 20 Reference number Nominal stroke Stroke limit (without K1 TM ) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -4 MCM0030H0K00 0.03 MCM0030HK00 482 0.063 300 330 (34) 430 400 9 MCM0030H20K00 20 0.1 2.3 MCM0030H30K00 30 487 0.164 MCM0040H0K00 0.064 MCM0040HK00 82 0.074 2.7 400 430 (44) 30 00 11 MCM0040H20K00 20 0.112 MCM0040H30K00 30 87 0.17 2.8 MCM000H0K00 0.076 MCM000HK00 682 0.08 3.1 00 30 (4) 630 600 13 MCM000H20K00 20 0.123 MCM000H30K00 30 687 0.186 3.2 MCM0060H0K00 0.087 MCM0060HK00 782 0.096 3. 600 630 (64) 730 700 1 MCM0060H20K00 20 0.134 MCM0060H30K00 30 787 0.198 3.6 (kg m 2 ) Mass (kg) Monocarrier dynamic torque specification (N cm) Ball screw lead Basic Load Rating 1.0~4.8 1.1~.8 20 ~7.9 30 1.8~11.1 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a 3,760 1,600 6,3 2,260 12,400 4,400 3,780 Linear guides C0 Support unit Load limit (N) Ø12,900 20 2,260 9,80 20 3,780 30 3,260 8,600 6,0 30,400 2,730 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 229 89 89 1,40 34 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM0 (Double Slider) Accuracy Grade: High Grade (H) 2-M3 0. Tap depth 2 n-j4. drill thru j7. c'bore to bottom thickness 2 4-NSK K1 4-M4 0.7 4-M4 0.7 2-M3 0. Tap depth 6 Tap depth 6 Tap depth 1 98.6 0 30 12 20 12 6 0 0.008 j6h6 4-M4 0.7 Tap depth 8 (thru 6) 49 31 7 7 16 4 0 0.02 j32h7 18 27 19 14 40 40 28 14 0 2-Grease fitting Slider 2-Grease fitting L3 = (n 1) 0 Sub slider (1) 2-M4 0.7 Tap thru 2 4-M3 0. 2 3-M3 0. Tap depth Tap depth (both side) (both side) K1=6.8 16 98.6 0 30 12 20 12 2 4-M3 0. Tap depth (both side) 2 2 M3 0. K1=6.8 Tap depth (both side) 8 13 40 14 20 30 2 1-M3 0. 1 (7) Tap depth 4 (both side) 24 18 L2 42 L1 38 48 48.6 Dimension of MCM0 (Double Slider) Reference number Nominal stroke Stroke limit (K1 TM is not equipped) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -4 MCM0006HD00 60 83 (1) 332 280 20 6 0.08 2.3 MCM0011HD00 1 133 (160) 382 330 300 7 0.064 2. MCM0016HD00 160 183 (2) 432 380 30 8 0.07 2.7 MCM0021HD00 0.07 2 233 (260) 482 430 400 9 MCM0021H20D00 20 0.11 2.8 MCM0031HD00 0.086 3 333 (360) 82 30 00 11 MCM0031H20D00 20 0.162 3.2 MCM0041HD00 0.098 4 433 (460) 682 630 600 13 MCM0041H20D00 20 0.174 3.6 MCM001HD00 0.9 33 (60) 782 730 700 1 MCM001H20D00 20 0.18 4.2 (kg m 2 ) Mass (kg) Monocarrier dynamic torque specification (N cm) Ball screw lead 1.~7.6 20 2.3~11.8 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a 3,760 1,600 6,3 Ø12 2,260 12,400 4,400 3,780 20 2,260 9,80 20 3,780 Linear guides C0 Support unit Load limit (N),900 1,40 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Double 4 76 76 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 3

MCM Series Lightweight Type MCM06 Accuracy Grade: High grade (H) 2 n-j6 drill thru j9. c'bore to bottom thickness 2-NSK K1 4-M 0.8 Tap depth 8 18 18 2-M3 0. Tap depth 0 2-Grease fitting 6 G:20 L3 = (n 1) 0 (G:20) 6 2-M3 0. Tap depth 3.6 2 3-M3 0. Tap depth (both side) 2 2-M3 0. Tap depth 4 (both side) 60 44 K1=7.8 40 7 8 1 21 K1=7.8 23 13 4-M6 1.0 Tap depth (thru 6) 2 3-M3 0. Tap depth (both side) 0 0.009 j8h6 0 47 36 14 2 46 32 9 34 16 L2 L1 2 (7) 1 28 24 2 0 0.02 j36h7 46 7 8 Dimension of MCM06 (Single slider) Reference number Nominal stroke Stroke limit (without K1 TM ) Note: Dimension G is 4 for items marked with. Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -4 MCM0600H0K00 0.083 MCM0600HK00 0 8 (2) 28 190 0 2 0.077 MCM0600H20K00 20 0.122 MCM060H0K00 0.3 MCM060HK00 0 13 (12) 308 240 200 3 0.092 MCM060H20K00 20 0.137 MCM0601H0K00 0.122 MCM0601HK00 10 18 (202) 38 290 200 3 0.6 MCM0601H20K00 20 0.12 MCM06020H0K00 0.142 MCM06020HK00 200 23 (22) 408 340 300 4 0.121 MCM06020H20K00 20 0.167 MCM0602H0K00 0.161 MCM0602HK00 20 28 (302) 48 390 300 4 0.136 MCM0602H20K00 20 0.181 MCM06030H0K00 0.18 MCM06030HK00 300 33 (32) 08 440 400 0.1 MCM06030H20K00 20 0.196 (kg m 2 ) Mass (kg) 2.7 3.0 3. 3.8 4.2 4. Monocarrier dynamic torque specification (N cm) Ball screw lead 1.9~7.4 2.2~8.6 20 2.8~11.0 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a Ø16 7,3 2,200 13,00 7,060 20,000 6,0 12,700 Ø1 20 4,60 1,900 20 7,70 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 41 174 174 Linear guides C0 Support unit Load limit (N) 17,000 2,730 36 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM06 Accuracy Grade: High Grade (H) 2 n-j6 drill thru j9. c'bore to bottom thickness 2-NSK K1 4-M 0.8 Tap depth 8 18 18 2-M3 0. Tap depth 0 2-Grease fitting 6 G:20 L3 = (n 1) 0 (G:20) 6 2-M3 0. Tap depth 3.6 2 3-M3 0. Tap depth (both side) 2 2-M3 0. Tap depth 4 (both side) 60 44 K1=7.8 40 7 8 1 21 K1=7.8 23 13 4-M6 1.0 Tap depth (thru 6) 2 3-M3 0. Tap depth (both side) 0 0.009 j8h6 0 14 2 46 47 36 32 9 34 16 L2 L1 2 (7) 1 28 24 2 0 0.02 j36h7 46 7 8 Dimension of MCM06 (Single Slider) Reference number Nominal stroke Stroke limit (without K1 TM ) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -4 MCM06040H0K00 0.219 MCM06040HK00 400 43 (42) 608 40 00 6 0.180 MCM06040H20K00 20 0.22 MCM0600H0K00 0.28 MCM0600HK00 00 3 (2) 708 640 600 7 0.209 MCM0600H20K00 20 0.2 MCM06060H0K00 0.297 MCM06060HK00 600 63 (62) 808 740 700 8 0.239 MCM06060H20K00 20 0.284 MCM06070H0K00 0.33 MCM06070HK00 700 73 (72) 908 840 800 9 0.268 MCM06070H20K00 20 0.314 MCM06080H0K00 0.374 MCM06080HK00 800 83 (82) 1,008 940 900 0.298 MCM06080H20K00 20 0.343 (kg m 2 ) Mass (kg).2 6.0 6.7 7.4 8.1 Monocarrier dynamic torque specification (N cm) Ball screw lead 1.9~7.4 2.2~8.6 20 2.8~11.0 1. Frictional resistance of NSK K1 is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a Ø16 7,3 2,200 13,00 7,060 20,000 6,0 12,700 Ø1 20 4,60 1,900 20 7,70 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 41 174 174 Linear guides C0 Support unit Load limit (N) 17,000 2,730 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 37

MCM Series Lightweight Type MCM06 (Double Slider) Accuracy Grade: High Grade (H) 2 n-j6 drill thru j9. c'bore to bottom thickness 4-NSK K1 4-M 0.8 Tap depth 8 4-M 0.8 Tap depth 8 18 18 2-M3 0. Tap depth 0 2-Grease fitting Slider 2-Grease fitting Sub slider 6 G:20 L3 = (n 1) 0 (G:20) 6 2-M3 0. Tap depth 2 3-M3 0. Tap depth (both side) 7 8 1 2 2-M3 0. Tap depth 4 (both side) K1=7.8 21 3.6 60 44 40 21 3.6 60 44 40 2 2-M3 0. Tap depth 4 (both side) K1=7.8 23 13 2 3-M3 0. Tap depth (both side) 0 0.009 j8h6 0 47 36 4-M6 1.0 Tap depth (thru 6) 9 34 14 2 46 46 32 Dimension of MCM06 (Double Slider) Reference number Nominal stroke 16 Stroke limit (K1 TM is not equipped) L2 Ball screw lead L1 Body length 2 (7) 1 28 24 2 0 0.02 j36h7 L1 L2 L3 n 46 7 8 No. of mounting holes Inertia -4 MCM06011H0D00 0.14 1 133 (164) 408 340 300 4 MCM06011HD00 0.136 MCM06021H0D00 0.184 MCM06021HD00 2 233 (264) 08 440 400 0.166 MCM06021H20D00 20 0.27 MCM06031H0D00 0.223 MCM06031HD00 3 333 (364) 608 40 00 6 0.19 MCM06031H20D00 20 0.286 MCM06041H0D00 0.262 MCM06041HD00 4 433 (464) 708 640 600 7 0.224 MCM06041H20D00 20 0.316 MCM0601HD00 0.24 33 (64) 808 740 700 8 MCM0601H20D00 20 0.34 MCM06061HD00 0.283 6 633 (664) 908 840 800 9 MCM06061H20D00 20 0.37 MCM06071HD00 0.313 7 733 (764) 1,008 940 900 MCM06071H20D00 20 0.404 (kg m 2 ) Mass (kg) 4.4.1.8 6.6 7.3 8.0 8.7 Monocarrier dynamic torque specification (N cm) Ball screw lead 2.3~8. 2.7~.9 20 4.0~1.9 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a Ø16 7,3 2,200 13,00 7,060 20,000 6,0 12,700 Ø1 20 4,60 1,900 20 7,70 Linear guides C0 Support unit Load limit (N) 17,000 2,730 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Double 82 1,220 1,220 38 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM08 Accuracy Grade: High Grade (H) 2-M3 0. Tap depth 6 2 n-j7 drill thru j11 c'bore to bottom thickness 2-NSK K1 4-M6 1.0 Tap depth 2-M3 0. Tap depth 6 26 0 0 26 7 G:3 0 L3 = (n 1) 0 (G:3) 7 2-M4 0.7 Tap depth 8 12 18 7 2-Grease fitting 2 3-M3 0. Tap depth 6 (both side) 133.2 80 0 44 K1=8 20 K1=8 24 12 2 4-M3 0. Tap depth 6 (both side) 2 3-M3 0. Tap depth 6 (both side) 12 18 7 0 0.009 jh6 4-M4 0.7 Tap depth 8 60 4 44 61. 38 30 Dimension of MCM08 (Single Slider) Reference number Note: Dimension G is 60 for items marked with. 0 Nominal stroke 14 Stroke limit (without K1 TM ) L2 Ball screw lead L1 Body length 8 1 18 33 1 L1 L2 L3 n c44 4 78 80 0 0.03 j4h7 No. of mounting holes Inertia -4 MCM0800H0K00 0.1 0 8 (1) 28 220 0 2 MCM0800HK00 0.0 MCM080H0K00 0.120 MCM080HK00 0 13 (11) 33 270 200 3 0.114 MCM080H20K00 20 0.190 MCM0801H0K00 0.139 MCM0801HK00 10 18 (201) 38 320 200 3 0.129 MCM0801H20K00 20 0.20 MCM08020H0K00 0.19 MCM08020HK00 200 23 (21) 43 370 300 4 0.144 MCM08020H20K00 20 0.220 MCM0802H0K00 0.178 MCM0802HK00 20 28 (301) 48 420 300 4 0.19 MCM0802H20K00 20 0.23 MCM08030H0K00 0.198 MCM08030HK00 300 33 (31) 3 470 400 0.173 MCM08030H20K00 20 0.249 (kg m 2 ) Mass (kg) 4.1 4.6.1. 6.0 6. Monocarrier dynamic torque specification (N cm) Ball screw lead Basic Load Rating 1.0~.9 2.0~7.8 20 2.~.8 30 2.8~12.0 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 770 300 300 1. Frictional resistance of NSK K1 is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a Ø16 7,3 30,800 13,00 7,060 24,400 12,700 7,0 20 Ø1 4,60 19,400 20 7,70 30,070 169,300 30 8,730 Linear guides C0 Support unit Load limit (N) 22,800 3,040 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 39

MCM Series Lightweight Type MCM08 2-M3 0. Tap depth 6 2 n-j7 drill thru j11 c'bore to bottom thickness 2-NSK K1 4-M6 1.0 Tap depth 2-M3 0. Tap depth 6 Accuracy grade: High grade (H) 26 0 0 26 7 G:3 0 L3 = (n 1) 0 (G:3) 7 2-M6 1.0 Tap depth (opposite aspect) 28 28 133.2 2-M4 0.7 2-Grease fitting 80 0 Tap depth 8 2 3-M3 0. 44 7 Tap depth 6 (both side) K1=8 20 K1=8 16 12 18 24 12 2 4-M3 0. Tap depth 6 (both side) 2 3-M3 0. Tap depth 6 (both side) 12 18 7 0 0.009 jh6 4-M4 0.7 Tap depth 8 60 4 44 61. 38 28 28 2-M6 1.0 Tap depth (opposite aspect) 30 16 Dimension of MCM08 (Single Slider) Reference number 0 Nominal stroke 14 Stroke limit (without K1 TM ) L2 Ball screw lead L1 Body length 8 1 18 33 1 L1 L2 L3 n c44 4 78 80 j4h7 0 0.03 No. of mounting holes Inertia -4 (kg m 2 ) MCM08040H0K00 0.236 MCM08040HK00 0.203 400 43 (41) 63 70 00 6 MCM08040H20K00 20 0.279 MCM08040H30K00 30 0.40 MCM0800H0K00 0.27 MCM0800HK00 0.232 00 3 (1) 73 670 600 7 MCM0800H20K00 20 0.308 MCM0800H30K00 30 0.43 MCM08060H0K00 0.314 MCM08060HK00 0.262 600 63 (61) 83 770 700 8 MCM08060H20K00 20 0.338 MCM08060H30K00 30 0.464 MCM08070H0K00 0.33 MCM08070HK00 0.291 700 73 (71) 93 870 800 9 MCM08070H20K00 20 0.367 MCM08070H30K00 30 0.494 MCM08080H0K00 0.391 MCM08080HK00 0.32 800 83 (81) 1,03 970 900 MCM08080H20K00 20 0.396 MCM08080H30K00 30 0.396 Mass (kg) 7.4 8.4 9.3. 11.2 Monocarrier dynamic torque specification (N cm) Ball screw lead 1.0~.9 2.0~7.8 20 2.~.8 30 2.8~12.0 1. Frictional resistance of NSK K1 is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a Ø16 7,3 30,800 13,00 7,060 24,400 12,700 7,0 20 Ø1 4,60 19,400 20 7,70 30,070 169,300 30 8,730 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 770 300 300 Linear guides C0 Support unit Load limit (N) 22,800 3,040 40 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM08 (Double Slider) 2-M3 0. Tap depth 6 2 n-j7 drill thru j11 c'bore to bottom thickness 4-NSK K1 4-M6 1.0 Tap depth 4-M6 1.0 Tap depth 2-M3 0. Tap depth 6 Accuracy Grade: High Grade (H) 26 0 0 0 26 0 7 G:3 10 for reference number with * 2-Grease fitting Slider 2-Grease fitting Sub slider L3 = (n 1) 0 (G:3) 7 2-M4 0.7 Tap depth 8 1812 7 2 4-M3 0. Tap depth 6 (both side) 133.2 133.2 80 80 0 44 0 44 Tap depth 6 (both side) K1=8 20 20 K1=8 2 3-M3 0. Tap depth 6 (both side) 12 24 24 12 2 4-M3 0. Tap depth 6 (both side) 2 3-M3 0. 12 18 7 0 0.009 jh6 4-M4 0.7 Tap depth 8 61. 38 60 4 44 30 Dimension of MCM08 (Double Slider) Reference number Nominal stroke Bolthole pitch L 3 on item marked with 0 14 Stroke limit (K1 TM is not equipped) is 10mm. Ball screw lead L2 L1 Body length (8) 1 18 33 1 L1 L2 L3 n c44 4 78 80 j4h7 0 0.03 No. of mounting holes Inertia -4 MCM08008HD00 80 4 (136) 43 370 300 3 0.169 6. MCM08018HD00 0.199 180 204 (236) 3 470 400 7. MCM08018H20D00 20 0.31 MCM08028HD00 0.228 280 304 (336) 63 70 00 6 MCM08028H20D00 20 0.380 MCM08038HD00 0.27 380 404 (436) 73 670 600 7 MCM08038H20D00 20 0.409 MCM08048HD00 0.287 480 04 (36) 83 770 700 8 MCM08048H20D00 20 0.439 MCM0808HD00 0.316 80 604 (636) 93 870 800 9 MCM0808H20D00 20 0.468 MCM08068HD00 0.346 680 704 (736) 1,03 970 900 MCM08068H20D00 20 0.498 (kg m 2 ) Mass (kg) 8.4 9.4.3 11. 12.2 Monocarrier dynamic torque specification (N cm) Ball screw lead 2.~.8 20 4.0~17.2 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a Ø16 7,3 30,800 13,00 7,060 24,400 7,0 12,700 Ø1 20 4,60 19,400 20 7,70 Linear guides C0 Support unit Load limit (N) 22,800 3,040 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Double 1,40 2,00 2,00 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 41

MCM Series Lightweight Type MCM Accuracy Grade: High Grade (H) 2 n-j7 drill thru j11 c'bore to bottom thickness 8 2-M3 0. Tap depth 6 2-NSK K1 4-M6 1.0 Tap depth 2-M3 0. Tap depth 6 30 60 60 30 7 G:40 0 L3 = (n 1) 0 (G:40) 7 Dimension of MCM (Single Slider) Reference number 2-M4 0.7 Tap depth 8 0 Nominal stroke 20. 11. 7 1 Stroke limit (without K1 TM ) 2 3-M3 0. 146.6 Tap depth 6 (both side) 90 2-Grease fitting 60 44 K1=9 20 K1=9 28 12 Ball screw lead L2 L1 2 4-M3 0. Tap depth 6 (both side) 2 3-M3 0. Tap depth 6 7 (both side) 20. 11. Body length 1 (14) 20 18 49 67 0 0.011 j12h6 4-M 0.8 Tap depth 9 70 62 2 L1 L2 L3 n 72 48 0 0.03 j63h7 2 66 97 0 36 No. of mounting holes Inertia -4 MCM0HK00 0.332 0 130 (11) 362 280 200 2* MCM0H20K00 20 0.446 MCM01HK00 0.378 10 180 (201) 412 330 300 4 MCM01H20K00 20 0.492 MCM020HK00 0.42 200 230 (21) 462 380 300 4 MCM020H20K00 20 0.39 MCM02HK00 0.472 20 280 (301) 12 430 400 MCM02H20K00 20 0.86 MCM030HK00 0.19 300 330 (31) 62 480 400 MCM030H20K00 20 0.633 MCM040HK00 0.612 400 430 (41) 662 80 00 6 MCM040H20K00 20 0.726 MCM00HK00 0.706 MCM00H20K00 00 30 (1) 20 762 680 600 7 0.820 MCM00H30K00 30 1.0 Note: 1) Dimension G is 1 for items marked with. 2) *: Use mounting holes on each end of the rail. (kg m 2 ) Mass (kg) 7.8 8.7 9..4 11.2 13.0 14.6 Monocarrier dynamic torque specification (N cm) Ball screw lead 2.7~.8 20 3.1~12.7 30.1~18.0 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a,900 33,00 21,700 20 Ø20 7,060 26,600 7,600 20 12,700 30 11,700 23,200 30 22,700 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 1,170 42 42 Linear guides C0 Support unit Load limit (N) 29,400 3,380 42 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM Accuracy Grade: High Grade (H) 2 n-j7 drill thru j11 c'bore to bottom thickness 8 2-M3 0. Tap depth 6 2-NSK K1 4-M6 1.0 Tap depth 2-M3 0. Tap depth 6 30 60 60 30 Dimension of MCM (Single Slider) Reference number 2-M6 1.0 Tap depth (opposite aspect) 2-M4 0.7 Tap depth 8 31 31 7 0 Nominal stroke 19 11. 20. 1 0 7 G:40 L3 = (n 1) 0 (G:40) 7 Stroke limit (without K1 TM ) 2 3-M3 0. 146.6 Tap depth 6 (both side) 90 2-Grease fitting 60 44 K1=9 20 K1=9 28 12 Ball screw lead L2 L1 2 4-M3 0. Tap depth 6 (both side) 2 3-M3 0. Tap depth 6 7 (both side) 20. 11. Body length 1 (14) 20 18 49 67 0 0.011 j12h6 4-M 0.8 Tap depth 9 70 62 2 L1 L2 L3 n 2-M6 1.0 Tap depth (opposite aspect) 72 48 31 31 MCM060HK00 0.800 MCM060H20K00 600 630 (61) 20 862 780 700 8 0.914 MCM060H30K00 30 1.4 MCM070HK00 0.893 MCM070H20K00 700 730 (71) 20 962 880 800 9 1.007 MCM070H30K00 30 1.197 MCM080HK00 0.987 MCM080H20K00 800 830 (81) 20 1,062 980 900 1.1 MCM080H30K00 30 1.291 MCM090HK00 1.081 900 930 (91) 1,162 1,080 1,000 11 MCM090H20K00 20 1.19 MCM0HK00 1.174 1,000 30 (1,01) 1,262 1,180 1,000 11 MCM0H20K00 20 1.288 Note: Dimension G is 90 for items marked with. j63h7 0.03 0 c2 66 97 0 36 19 No. of mounting holes Inertia -4 (kg m 2 ) Mass (kg) 16.3 18.0 19.7 21.4 23.1 Monocarrier dynamic torque specification (N cm) Ball screw lead 2.7~.8 20 3.1~12.7 30.1~18.0 1. Frictional resistance of NSK K1 is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a,900 33,00 21,700 20 Ø20 7,060 26,600 7,600 20 12,700 30 11,700 23,200 30 22,700 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 1,170 42 42 Linear guides C0 Support unit Load limit (N) 29,400 3,380 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 43

MCM Series Lightweight Type MCM (Double Slider) Accuracy Grade: High Grade (H) 2 n-j7 drill thru j11 c'bore to bottom thickness 8 2-M3 0. Tap depth 6 4-NSK K1 4-M6 1.0 Tap depth 4-M6 1.0 Tap depth 2-M3 0. Tap depth 6 30 60 60 60 30 0 7 G:40 10 for reference number with * 2-Grease fitting Slider L3 = (n 1) 0 2-Grease fitting Sub slider (G:40) 7 2-M4 0.7 Tap depth 8 0 20. 11. 7 2 3-M3 0. Tap depth 6 (both side) 2 4-M3 0. Tap depth 6 (both side) K1=9 28 12 146.6 90 60 44 20 1 L2 L1 146.6 90 60 44 20 2 4-M3 0. Tap depth 6 (both side) 2 3-M3 0. Tap depth 6 (both side) K1=9 12 28 20. 11. 7 0 0.011 j12h6 1 (14) 20 18 49 67 70 62 2 4-M 0.8 Tap depth 9 72 48 j63h7 0.03 0 2 66 97 0 36 Dimension of MCM (Double Slider) Reference number Nominal stroke Stroke limit (K1 TM is not equipped) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -4 (kg m 2 ) MCM007HD00 70 86 (122) 462 380 300 3 0.463 11.0 MCM017HD00 0.7 170 186 (222) 62 480 400 MCM017H20D00 20 0.78 12.7 MCM027HD00 0.60 270 286 (322) 662 80 00 6 MCM027H20D00 20 0.878 13.4 MCM037HD00 0.744 370 386 (422) 762 680 600 7 MCM037H20D00 20 0.972 1.1 MCM047HD00 0.838 470 486 (22) 862 780 700 8 MCM047H20D00 20 1.066 17.8 MCM07HD00 0.931 70 86 (622) 962 880 800 9 MCM07H20D00 20 1.19 19. MCM067HD00 1.02 670 686 (722) 1,062 980 900 MCM067H20D00 20 1.23 21.2 MCM087HD00 1.212 870 886 (922) 1,262 1,180 1,000 11 MCM087H20D00 20 1.440 23.6 Dimension G is 90 for those marked with. Dimension (1) is 10mm for those marked with. Mass (kg) Monocarrier dynamic torque specification (N cm) Ball screw lead 4.2~1.6 20.0~19.6 1. Frictional resistance of NSK K1 Lubrication Unit is included in the dynamic torque in the table. 2. Grease is packed into the ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) Rated running d Ball screw Ca Linear guides C Support unit Ca Ball screw C0a distance La (km),900 33,00 21,700 Ø20 7,600 20 7,060 26,600 20 12,700 Linear guides C0 Support unit Load limit (N) 29,400 3,380 Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Double 2,340 2,940 2,940 44 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

2.3 MCM Series Optional Accessories 2.3.1 Sensor Unit Proximity Switch (Example of assembly) *See page 24 for specification of proximity switch. Type Reference Number Dimension (A) Dimension (B) Body width W MCM02 MC-SR02-00 MC-SR02-01 MC-SR02-02 17 2 28 MCM03 MC-SR03- MC-SR03-11 MC-SR03-12 17 3 34 MCM0 MC-SR0- MC-SR0-11 MC-SR0-12 17 1 48.6 MCM06 MC-SR06- MC-SR06-11 MC-SR06-12 17 19 8 MCM08 MC-SR08- MC-SR08-11 MC-SR08-12 16 27 80 MCM MC-SR- MC-SR-11 MC-SR-12 16 3 0 Quantity Proximity switch (normally open) 3 1 E2S-W13 (OMRON Corp.) Proximity switch (normally close) 3 2 E2S-W14 (OMRON Corp.) A spacer plate is required when you use a cover unit or sensor unit for an MCM03 with a lead of 1 or 2 mm. (Refer to page 30.) A sensor unit consists of sensors and sensor mounting parts. Photo Sensor *See page 2 for specification of photo sensor. A spacer plate is required when you use a cover unit or sensor unit for an MCM03 with a lead of 1 or 2 mm. (Refer to page 30.) (Example of assembly) Type NPN Sensor* Reference Number PNP Sensor** Reference Number Dimension (C) Dimension (D) Body width W Remarks MCM03 MC-SR03-13 MC-SR03-40 24 0. 34.0 * OMRON EE-SX674 MCM0 MC-SR0-13 MC-SR0-62 24.0 48.6 ** OMRON EE-SX674P MCM06 MC-SR06-13 MC-SR06-46 24 9.0 8.0 EE-01 Connector MCM08 MC-SR08-13 MC-SR08-6 23 17.0 80.0 3 Sensors & 3 Connectors MCM MC-SR-13 MC-SR-4 22 24.0 0.0 per Ref No. A sensor unit consists of sensors and sensor mounting parts. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 4

MCM Series Lightweight Type Sensor Rail Sensor Rail for MCM03: MC-SRL3- * * * * (Example of assembly) Sensor Rail for MCM0: MC-SRL- * * * * (Example of assembly) Sensor Rail for MCM02: MC-SRL2- * * * * Sensor Rail for MCM06: MC-SRL6- * * * * Sensor Rail for MCM08: MC-SRL8- * * * * Sensor Rail for MCM: MC-SRL1- * * * * (Example of assembly) * * * * is the same as rail dimension L 2 Please install washer between sensor rail and support blocks for MCM03, MCM0, MCM06 and MCM08. 46 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM Series and Sensor Rail Combination Table Table 2-4 Model No. Body length L2 Reference No. MCM02 MCM03 MCM0 0 10 200 11 140 190 240 290 340 180 230 280 330 380 430 30 630 MCM0200H01K MCM0200P01K MCM0200H02K MCM0200P02K MCM020H01K MCM020P01K MCM020H02K MCM020P02K MCM0201H01K MCM0201P01K MCM0201H02K MCM0201P02K MCM0300P01K00 MCM0300P02K00 MCM0300HK00 MCM0300H12K00 MCM030P01K00 MCM030P02K00 MCM030HK00 MCM030H12K00 MCM0301P01K00 MCM0301P02K00 MCM0301HK00 MCM0301H12K00 MCM03020HK00 MCM03020H12K00 MCM0302HK00 MCM0302H12K00 MCM000H0K00 MCM000HK00 MCM000H20K00 MCM00H0K00 MCM00HK00 MCM00H20K00 MCM001H0K00 MCM001HK00 MCM001H20K00 MCM0006HD00 MCM0020H0K00 MCM0020HK00 MCM0020H20K00 MCM0011HD00 MCM002H0K00 MCM002HK00 MCM002H20K00 MCM0016HD00 MCM0030H0K00 MCM0030HK00 MCM0030H20K00 MCM0030H30K00 MCM0021HD00 MCM0021H20D00 MCM0040H0K00 MCM0040HK00 MCM0040H20K00 MCM0040H30K00 MCM0031HD00 MCM0031H20D00 MCM000H0K00 MCM000HK00 MCM000H20K00 MCM000H30K00 MCM0041HD00 MCM0041H20D00 Sensor rail reference No. MC-SRL2-0* MC-SRL2-010 MC-SRL2-0200 MC-SRL3-011 MC-SRL3-0140 MC-SRL3-0190 MC-SRL3-0240 MC-SRL3-0290 MC-SRL3-0340 MC-SRL-0180 MC-SRL-0230 MC-SRL-0280 MC-SRL-0330 MC-SRL-0380 MC-SRL-0430 MC-SRL-030 MC-SRL-0630 Model No. Body length L2 Reference No. MCM0 730 MCM06 190 240 290 340 390 440 40 640 740 840 940 MCM0060H0K00 MCM0060HK00 MCM0060H20K00 MCM0060H30K00 MCM001HD00 MCM001H20D00 MCM0600H0K00 MCM0600HK00 MCM0600H20K00 MCM060H0K00 MCM060HK00 MCM060H20K00 MCM0601H0K00 MCM0601HK00 MCM0601H20K00 MCM06020H0K00 MCM06020HK00 MCM06020H20D00 MCM06011H0D00 MCM06011HD00 MCM0602H0K00 MCM0602HK00 MCM0602H20K00 MCM06030H0K00 MCM06030HK00 MCM06030H20K00 MCM06021H0D00 MCM06021HD00 MCM06021H20D00 MCM06040H0K00 MCM06040HK00 MCM06040H20K00 MCM06031H0D00 MCM06031HD00 MCM06031H20D00 MCM0600H0K00 MCM0600HK00 MCM0600H20K00 MCM06041H0D00 MCM06041HD00 MCM06041H20D00 MCM06060H0K00 MCM06060HK00 MCM06060H20K00 MCM0601HD00 MCM0601H20D00 MCM06070H0K00 MCM06070HK00 MCM06070H20K00 MCM06061HD00 MCM06061H20D00 MCM06080H0K00 MCM06080HK00 MCM06080H20K00 MCM06071HD00 MCM06071H20D00 Sensor rail reference No. MC-SRL-0730 MC-SRL6-0190 MC-SRL6-0240 MC-SRL6-0290 MC-SRL6-0340 MC-SRL6-0390 MC-SRL6-0440 MC-SRL6-040 MC-SRL6-0640 MC-SRL6-0740 MC-SRL6-0840 MC-SRL6-0940 *) When using NSK standard sensors, prepare two sensor rails. Two sensor rails will also be required for other Monocarriers depending on signal points of sensors. Contact NSK for details. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 47

MCM Series Lightweight Type Model No. Body length L2 Reference No. MCM08 220 270 320 370 420 470 70 670 770 870 970 MCM0800H0K00 MCM0800HK00 MCM080H0K00 MCM080HK00 MCM080H20K00 MCM0801H0K00 MCM0801HK00 MCM0801H20K00 MCM08020H0K00 MCM08020HK00 MCM08020H20K00 MCM08008HD00 MCM0802H0K00 MCM0802HK00 MCM0802H20K00 MCM08030H0K00 MCM08030HK00 MCM08030H20K00 MCM08018HD00 MCM08018H20D00 MCM08040H0K00 MCM08040HK00 MCM08040H20K00 MCM08040H30K00 MCM08028HD00 MCM08028H20D00 MCM0800H0K00 MCM0800HK00 MCM0800H20K00 MCM0800H30K00 MCM08038HD00 MCM08038H20D00 MCM08060H0K00 MCM08060HK00 MCM08060H20K00 MCM08060H30K00 MCM08048HD00 MCM08048H20D00 MCM08070H0K00 MCM08070HK00 MCM08070H20K00 MCM08070H30K00 MCM0808HD00 MCM0808H20D00 MCM08080H0K00 MCM08080HK00 MCM08080H20K00 MCM08080H30K00 MCM08068HD00 MCM08068H20D00 Sensor rail reference No. MC-SRL8-0220 MC-SRL8-0270 MC-SRL8-0320 MC-SRL8-0370 MC-SRL8-0420 MC-SRL8-0470 MC-SRL8-070 MC-SRL8-0670 MC-SRL8-0770 MC-SRL8-0870 MC-SRL8-0970 Model No. Body length L2 Reference No. 280 MCM0HK00 MCM0H20K00 330 MCM01HK00 MCM01H20K00 MCM020HK00 380 MCM020H20K00 MCM007HD00 430 MCM02HK00 MCM02H20K00 MCM030HK00 480 MCM030H20K00 MCM017HD00 MCM017H20D00 MCM040HK00 80 MCM040H20K00 MCM027HD00 MCM027H20D00 MCM00HK00 MCM00H20K00 680 MCM00H30K00 MCM037HD00 MCM MCM037H20D00 MCM060HK00 MCM060H20K00 780 MCM060H30K00 MCM047HD00 MCM047H20D00 MCM070HK00 MCM070H20K00 880 MCM070H30K00 MCM07HD00 MCM07H20D00 MCM080HK00 MCM080H20K00 980 MCM080H30K00 MCM067HD00 MCM067H20D00 1,080 MCM090HK00 MCM090H20K00 MCM0HK00 1,180 MCM0H20K00 MCM087HD00 MCM087H20D00 Sensor rail reference No. MC-SRL1-0280 MC-SRL1-0330 MC-SRL1-0380 MC-SRL1-0430 MC-SRL1-0480 MC-SRL1-080 MC-SRL1-0680 MC-SRL1-0780 MC-SRL1-0880 MC-SRL1-0980 MC-SRL1-80 MC-SRL1-1180 48 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

2.3.2 Cover Unit Cover Unit for MCM02 (Unit: mm) Stroke Reference Number Length (L) 0 MC-CV0200-00 11 0 MC-CV020-00 16 10 MC-CV0201-00 21 Height of screw head is not included. Cover Unit for MCM03 Full cover unit X 12 12. Top cover Unit Note: Optional spacer (MC-SP03-00) is required for a main unit with ball screw lead of 1 and 2 mm. X 46 12 24. (1) X Section X-X M X 9. Section X-X (13) (0.) (26) (26) (0.) (0.) 16 16 1 L Stroke 2 3. (13) Reference No. M (Unit: mm) Cover length Top cover unit Full cover unit Length (L) Length (M) 0 (lead 1, 2) MC-CV0300-02 *MC-CV0300-01 139 133 0 (lead, 12) MC-CV0300-02A *MC-CV0300-01A 164 18 0 MC-CV030-02 *MC-CV030-01 214 208 10 MC-CV0301-02 *MC-CV0301-01 264 28 200 MC-CV03020-02 *MC-CV03020-01 314 308 20 MC-CV0302-02 *MC-CV0302-01 364 38 *) The full-cover unit cannot be used when the sensor unit is used. Height of screw head is not included. Spacer for MCM03 (Optional) MC-SP03-00 (for Ball Screw Lead 1 and 2 mm) Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 49

MCM Series Lightweight Type Cover Unit for MCM0, 06, 08 and X W H X (1) Embossment height of cover mounting plate Top cover Unit Section X-X Model No. MCM0 MCM06 MCM08 MCM D L Note: The dimensions of cover shown above do not include the head height of fixing machine screws. Add the head of machine screws of approximately 2. mm to the outer measurement of a cover unit. Set a margin for mechanical interference with surrounding components. *1) When using sensor unit, full-cover unit cannot be used. *2) A cover mounting plate is not used to MCM06. Stroke Cover Unit Reference No. Cover length Single slider Double slider Top cover Unit Full cover Unit *1 Length (L) Height (H) Width (W) End part (D) 0 MC-CV000-01 MC-CV000-00 200 0 MC-CV00-01 MC-CV00-00 20 10 60 MC-CV001-01 MC-CV001-00 300 200 1 MC-CV0020-01 MC-CV0020-00 30 20 160 MC-CV002-01 MC-CV002-00 400 300 2 MC-CV0030-01 MC-CV0030-00 40 400 3 MC-CV0040-01 MC-CV0040-00 0 00 4 MC-CV000-01 MC-CV000-00 60 600 MC-CV0060-37 MC-CV0060-3 70 0 MC-CV0600-01 MC-CV0600-00 22 0 MC-CV060-01 MC-CV060-00 27 10 MC-CV0601-01 MC-CV0601-00 32 200 1 MC-CV06020-01 MC-CV06020-00 37 20 MC-CV0602-01 MC-CV0602-00 42 300 2 MC-CV06030-01 MC-CV06030-00 47 400 3 MC-CV06040-01 MC-CV06040-00 7 00 4 MC-CV0600-01 MC-CV0600-00 67 600 MC-CV06060-01 MC-CV06060-00 77 700 6 MC-CV06070-01 MC-CV06070-00 87 800 7 MC-CV06080-36 MC-CV06080-3 97 0 MC-CV0800-01 MC-CV0800-00 248 0 MC-CV080-01 MC-CV080-00 298 10 MC-CV0801-01 MC-CV0801-00 348 200 80 MC-CV08020-01 MC-CV08020-00 398 20 MC-CV0802-01 MC-CV0802-00 448 300 180 MC-CV08030-01 MC-CV08030-00 498 400 280 MC-CV08040-01 MC-CV08040-00 98 00 380 MC-CV0800-01 MC-CV0800-00 698 600 480 MC-CV08060-01 MC-CV08060-00 798 700 80 MC-CV08070-01 MC-CV08070-00 898 800 680 MC-CV08080-01 MC-CV08080-00 998 0 MC-CV0-01 MC-CV0-00 308 10 MC-CV01-01 MC-CV01-00 38 200 70 MC-CV020-01 MC-CV020-00 408 20 MC-CV02-01 MC-CV02-00 48 300 170 MC-CV030-01 MC-CV030-00 08 400 270 MC-CV040-01 MC-CV040-00 608 00 370 MC-CV00-01 MC-CV00-00 708 600 470 MC-CV060-01 MC-CV060-00 808 700 70 MC-CV070-01 MC-CV070-00 908 800 670 MC-CV080-01 MC-CV080-00 1,008 900 MC-CV090-01 MC-CV090-00 1,8 1,000 870 MC-CV0-36 MC-CV0-3 1,208 L 38. 6 2.6 48. 7 6. 90 2.6 66. 1 3.6 Unit: mm *2 0 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

2.3.3 Motor Bracket 2.3.3.1 Motor Bracket by NEMA Size MCM02 (NEMA 17) Reference Number MC-BK02-231-31 Included: 4 pcs M3x0.x12 Socket Head Cap Screws 2 pcs M3x0.x Socket Head Cap Screws MCM03 (Blank) Reference Number MC-BK03-000-31 Included: 4 pcs M3x0.x Socket Head Cap Screws Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 1

MCM Series Lightweight Type MCM03 (NEMA 17) Reference Number MC-BK03-231-31 Included: 4 pcs M3x0.x Socket Head Cap Screws MCM03 (NEMA 23) Reference Number MC-BK03-167-32 Included: 4 pcs M3x0.x Socket Head Cap Screws 4 pcs M4x0.7x12 Socket Head Cap Screws 2 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM0 (Blank) Reference Number MC-BK0-000-31 Included: 4 pcs M4x0.7x1 Socket Head Cap Screws MCM0 (NEMA 23) Reference Number MC-BK0-167-31 Included: 4 pcs M4x0.7x14 Socket Head Cap Screws 4 pcs M4x0.7x1 Socket Head Cap Screws Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 3

MCM Series Lightweight Type MCM0 (NEMA 34) Reference Number MC-BK0-198-31 Included: 4 pcs M4x0.7x1 Socket Head Cap Screws 4 pcs Mx0.8x16 Socket Head Cap Screws MCM06 (NEMA 23) Reference Number MC-BK06-167-31 Included: 4 pcs M6x1.0x16 Socket Head Cap Screws 4 pcs M4x0.7x14 Socket Head Cap Screws 4 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM08 (NEMA 23) Reference Number MC-BK08-167-31 Included: 4 pcs M4x0.7x20 Socket Head Cap Screws 4 pcs M4x0.7x14 Socket Head Cap Screws MCM08 (Blank) Reference Number MC-BK08-000-31 Included: 4 pcs M4x0.7x22 Socket Head Cap Screws Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM Series Lightweight Type MCM08 (NEMA 34) Reference Number MC-BK08-198-31 Included: 4 pcs M4x0.7x22 Socket Head Cap Screws 4 pcs Mx0.8x16 Socket Head Cap Screws MCM (NEMA 23) Reference Number MC-BK-167-31 Included: 4 pcs Mx0.8x30 Socket Head Cap Screws 4 pcs M4x0.7x22 Socket Head Cap Screws 6 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM (Blank) Reference Number MC-BK-000-31 Included: 4 pcs Mx0.8x30 Socket Head Cap Screws MCM (NEMA 34) Reference Number MC-BK-198-32 Included: 4 pcs Mx0.8x30 Socket Head Cap Screws 4 pcs Mx0.8x16 Socket Head Cap Screws Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 7

MCM Series Lightweight Type 2.3.3.2 Motor Bracket by Standard Size MCM02 Reference Number MC-BK02-128-00 Note: Be sure to align the center lines when installing the motor. Maker Yaskawa Electric Corp. ( - mini Series) Compatible motor Motor models SGMM-A1(W) SGMM-A2(20W) Reference Number MC-BK02-133-00 Note: Be sure to align the center lines when installing the motor. Maker Mitsubishi Electric Corp. (Melservo series) Compatible motor Motor models HC-AQ013(W) HC-AQ023(20W) Reference Number MC-BK02-223-00 Note: Be sure to align the center lines when installing the motor. Maker Oriental Motor Co., Ltd. Compatible motor Motor models PMU33/3 (-phase stepping motor) PMC33/3 (-phase stepping motor) 8 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM03 Reference Number MC-BK03-146-00 +0.028 +0.007 j22g7 j18 4-j3. drill thru 2. 3 18 9 Section Y-Y 26 22 (38) j28. 12. +0.1 +0.0 j30 (2) Y (6) (6) 7 11 7 8 Z Z 0 8 (21) Hexagon socket head cap screw (M4, length 12) 2) Hexagon socket head cap screw (M3, length ) 3) Y Motor bracket (A ) 1) (Black anodized aluminum) 4-M4 0.7 tap thru PCD 46, 90 equally spaced (26) (Dimension for coupling) Monocarrier (42) (42) Notes: Section Z-Z 9. 32. 1) 3) 2) Motor (Example of assembly) 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Yaskawa Electric Corp. Mitsubishi Electric Corp. OMRON Corp. Sanyo Denki Co., Ltd. Compatible motor Motor models SGMAH-A3(30W), SGMJV-AA(0W), SGMAV-AA(0W), SGMJV-01A(0W), SGMAV-01A(0W), SGMAV-C2A(10W) HF-KP03(0W), HF-MP03(0W), HC-KFS03(0W), HC-MFS03(0W), HF-KP13(0W), HF-MP13(0W), HC-KFS13(0W), HC-MFS13(0W) R88M-W03(30W), R88M-W0(0W), R88M-W(0W) P30B04003(30W), P30B0400(0W), P30B040(0W) MCM03 Reference Number MC-BK03-148-01 9. 32. +0.028 +0.007 j22g7 j18 4-j3. drill thru 2. 2. 18 9 Section Y-Y 26 22 (38) j28. 12. +0.1 +0.0 j34 (2) Y (6) (6) 7 11 7 8 Z Z 0 8 (21) Y (42) Motor bracket (A ) 1) (Black anodized aluminum) 4-M3 0. tap thru PCD 48, 90 equally spaced (42) (26) (Dimension for coupling) Section Z-Z Monocarrier j (Monocarrier shaft dia.) 1) 2) 2) (Example of assembly) Motor Hexagon socket head cap screw (M3, length ) 2) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Sanyo Denki Co., Ltd. Compatible motor Motor models P0B04006(60W), P0B040(0W) Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 9

MCM Series Lightweight Type MCM03 Reference Number MC-BK03-231-00 black anodized aluminum Note: Be sure to align the center lines when installing the motor. Check the orientation of the bracket. Compatible motor Maker Motor models Sanyo Denki Co., Ltd. Oriental Motor Co., Ltd. PBM423xxx, 3Fxx AS46, ASC46, UPK4x, PK4x, CSK4x, CFK4x, UMK24x, CSK24x, PK24x MCM0 Reference Number MC-BK0-14-00 black anodized aluminum Note: Be sure to align the center lines when installing the motor. Check the orientation of the bracket. Compatible motor Maker Panasonic Co., Ltd. Motor models MSMDA(0W), MSMD01(0W) 60 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM0 Reference Number MC-BK0-146-00 Y 9 30 Z Y Motor bracket (A ) 1) (Black anodized aluminum) 8 32 Section Y-Y Z 9 8 1) 2) 3) Hexagon socket head cap screw (M4, length 1) 2) Hexagon socket head cap screw (M4, length 12) 3) 2. Z 8 32 Y 30 9 9 Y Motor bracket (A ) 1) (Black anodized aluminum) 32 +0.034 +0.009 Z 9 8 (j32) (Diameter for coupling) 1) 2) 3) (37) (19) (18) 1413 9 8 (21) (42) 9 () 32 4-j drill thru +0.034 +0.009 j32g7 j32 4-M4 0.7 tap thru PCD 46, 90 equally spaced (j32) (Diameter for coupling) j32 (37) (19) (18) 14 13 9 8 (21) (42) Monocarrier Motor 38 (48) 9 8 0 (48) Section Z-Z Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Compatible motor Maker Motor models Yaskawa Electric Corp. SGMAH-A3(30W), SGMJV-AA(0W), SGMAV-AA(0W), SGMJV-01A(0W), SGMAV-01A(0W), SGMAV-C2A(10W) Mitsubishi Electric Corp. HF-KP03(0W), HF-MP03(0W), HC-KFS03(0W), HC-MFS03(0W), HF-KP13(0W), HF-MP13(0W), HC-KFS13(0W), HC-MFS13(0W) OMRON Corp. R88M-W03(30W), R88M-W0(0W), R88M-W(0W) Sanyo Denki Co., Ltd. P30B04003(30W), P30B0400(0W), P30B040(0W) MCM0 Reference Number MC-BK0-148-00 +0. +0.0 j34 Section Y-Y () 4-j drill thru j32g7 j32 4-M3 0. tap thru PCD 48, 90 equally spaced 38 (48) 9 8 0 (48) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M4, length 1) 2) Hexagon socket head cap screw (M3, length 12) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Compatible motor Motor models Panasonic Co., Ltd. MAMA01(0W) Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 61

MCM Series Lightweight Type MCM0 Reference Number MC-BK0-160-00 Z 8 32 j32 Y Y 3 (18) 13 14 9 8 9 38 (48) 9 0 Z 8 32 4-j drill thru (37) (19) Section Y-Y (18) 13 14 6 48 6 Motor bracket (A ) 1) (Black anodized aluminum) (37) (19) Section Y-Y 4-j drill thru +0.034 +0.009 j32g7 Z (30) 4-M4 0.7 tap thru PCD 60, 90 equally spaced j0 +0. +0.0 (60) (j32) (Diameter for coupling) Monocarrier 1) 2) 2) Motor (60) Section Z-Z 2) Hexagon socket head cap screw (M4, length 1) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Sanyo Denki Co., Ltd. Compatible motor Motor models P0B000(0W), P0B00(0W), P0B0020(200W) MCM0 Reference Number MC-BK0-20-00 3 j32 38 (48) Y +0.034 +0.009 j32g7 Z 9 9 0 8 9 Y 6 48 6 (30) 0 (60) Motor bracket (A ) 1) (Black anodized aluminum) 4-M4 0.7 tap thru j36 +0. +0.0 0 (60) Section Z-Z (j32) (Diameter for coupling) Monocarrier 1) 2) 2) Motor 2) Hexagon socket head cap screw (M4, length 1) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Compatible motor Motor models Sanyo Denki Co., Ltd. Oriental Motor Co., Ltd. PBM603xxx, PBM604xxx, 3F78xx AS66, ASC66, UPK6x, UFK6x, PK6x, CSK6x, CFK6x 62 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM06 Reference Number MC-BK06-14-00 Z 1 36 Y 9 39 Y Motor bracket (A ) 1) (Black anodized aluminum) 4-j6. drill thru Section Y-Y +0.034 j36g7 +0.009 9 Z 42 8 9 11. 4-M3 0. tap thru PCD 4, 90 equally spaced +0. j30 +0.0 (39) (Dimension for coupling) 1) 2) 3) (47) (24) (23) 36 46 (7) 9 60 8 11. (21) (42) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M6, length 16) 2) Hexagon socket head cap screw (M3, length 12) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Compatible motor Motor models Panasonic Co., Ltd. MSMDA(0W), MSMD01(0W) MCM06 Reference Number MC-BK06-146-00 Y Z 9 39 Y Motor bracket (A ) 1) (Black anodized aluminum) 1 36 4-j6. drill thru (47) (24) (23) 36 Section Y-Y 46 (7) 9 Z 42 +0.034 j36g7 +0.009 +0. 9 8 j30 +0.0 60 8 9 11. 11. (21) 4-M4 0.7 tap thru PCD 46, 90 equally spaced (42) 39 (Dimension for coupling) Section Z-Z Monocarrier 1) 2) 3) Motor Hexagon socket head cap screw (M6, length 16) 2) Hexagon socket head cap screw (M4, length 12) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Yaskawa Electric Corp. Mitsubishi Electric Corp. Compatible motor Motor models SGMJV-AA(0W), SGMAV-AA(0W), SGMJV-01A(0W), SGMAV-01A(0W), SGMAV-C2A(10W) HF-KP03(0W), HF-MP03(0W), HC-KFS03(0W), HC-MFS03(0W), HF-KP13(0W), HF-MP13(0W), HC-KFS13(0W), HC-MFS13(0W) OMRON Corp. Sanyo Denki Co., Ltd. R88M-W03(30W), R88M-W0(0W), R88M-W(0W) P30B04003(30W), P30B0400(0W), P30B040(0W) Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 63

MCM Series Lightweight Type MCM06 Reference Number MC-BK06-148-00 Y Z 9 39 Y Motor bracket (A ) 1) (Black anodized aluminum) 1 36 4-j6. drill thru Section Y-Y +0.034 j36g7 +0.009 9 42 Z 8 9 11. 4-M3 0. tap thru PCD 48, 90 equally spaced j34 +0. +0.0 (39) (Dimension for coupling) 1) 2) 3) (47) (24) (23) 36 (21) (42) 46 (7) 9 60 8 11. Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M6, length 16) 2) Hexagon socket head cap screw (M3, length 12) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Compatible motor Motor models Panasonic Co., Ltd. Sanyo Denki Co., Ltd. MAMA01(0W) P0B04006(60W), P0B040(0W) MCM06 Reference Number MC-BK06-160-00 4-j6. drill thru (47) (24) (23) Section Y-Y 36 j36 3 46 (7) Y 1. 7 1. +0.034 +0.009 j36g7 9 9 Z 41 Z 61 9 39 9 11. 11. Y (30) (60) Motor bracket (A ) 1) (Black anodized aluminum) 4-M4 0.7 tap thru PCD 60, 90 equally spaced +0. j0 +0.0 (39) (Dimension for coupling) (60) 1) Section Z-Z Monocarrier 14 37 2) 3) Motor Hexagon socket head cap screw (M6, length 16) 2) Hexagon socket head cap screw (M4, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Sanyo Denki Co., Ltd. Compatible motor Motor models P0B000(0W), P0B00(0W), P0B0020(200W) 64 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM06 Reference Number MC-BK06-170-00 4-j6. drill thru (47) (24) (23) 3. Section Y-Y 36 j36 46 (7) Y 1. 7 1. 9 Z 61 9 39 9 11. 11. Y Motor bracket (A ) 1) (Black anodized aluminum) 41 4-M 0.8 tap thru Z PCD 70, 90 equally spaced +0. +0.009 j0 +0.0 9 (39) (Dimension for coupling) +0.034 j36g7 (30) (60) (60) Section Z-Z Monocarrier 14 37 1) 2) 3) Motor Hexagon socket head cap screw (M6, length 16) 2) Hexagon socket head cap screw (M, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Yaskawa Electric Corp. Mitsubishi Electric Corp. OMRON Corp. Compatible motor Motor models SGMJV-02A(200W), SGMAV-02A(200W), SGMJV-04A(400W), SGMAV-04A(400W) HF-KP23(200W), HF-MP23(200W), HF-KP43(400W), HF-MP43(400W), HC-KFS23(200W), HC-MFS23(200W), HC-KFS43(400W), HC-MFS43(400W) R88M-W20(200W), R88M-W40(400W) Sanyo Denki Co., Ltd. P30B06020(200W), P30B06040(400W) MCM06 Reference Number MC-BK06-170-01 4-j6. drill thru (47) (24) (23) Section Y-Y 36 j36 46 (7) 3. Y 1. 7 1. +0.034 +0.009 j36g7 9 9 Z 41 Z 61 9 39 9 11. 11. Y (30) (60) Motor bracket (A ) 1) (Black anodized aluminum) 4-M4 0.7 tap thru PCD 70, 90 equally spaced j0 +0. +0.0 (39) (Dimension for coupling) (60) Section Z-Z Monocarrier 14 37 1) 2) 3) Motor Hexagon socket head cap screw (M6, length 16) 2) Hexagon socket head cap screw (M4, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Panasonic Co., Ltd. Compatible motor Motor models MSMD02(200W), MAMA02(200W), MSMD04(400W), MAMA04(400W) Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 6

MCM Series Lightweight Type MCM06 Reference Number MC-BK06-20-00 4-j6. drill thru (47) (24) (23) Section Y-Y 36 46 (7) Y 1. 7 1. +0.034 +0.009 j36g7 9 9 Z 41 Z 61 9 39 9 11. 11. Y (30) 4-M4 0.7 tap thru j36 +0. +0.0 0 (60) Motor bracket (A ) 1) (Black anodized aluminum) 0 (60) (39) (Dimension for coupling) Section Z-Z Monocarrier 14 37 1) 2) 3) Motor Hexagon socket head cap screw (M6, length 16) 2) Hexagon socket head cap screw (M4, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Compatible motor Motor models Sanyo Denki Co., Ltd. Oriental Motor Co., Ltd. PBM603xxx, PBM604xxx, 3F78xx AS66, ASC66, UPK6x, PK6x, CSK6x,CFK6x, UMK6x, UFK6x MCM08 Reference Number MC-BK08-14-00 Z 1 37 j37 j37 Y 44 Y Motor bracket (A ) 1) (Black anodized aluminum) Section Y-Y Z 18 42 4-j drill thru (30) +0.0 j4g7 +0.040 1 4-M3 0. tap thru PCD 4, 90 equally spaced (44) (Dimension for coupling) 2) 1) 3) (4) 44 1 1 (27) (4) Monocarrier Motor 4 (64) 1 18 70 (64) Section Z-Z Hexagon socket head cap screw (M4, length 20) 2) Hexagon socket head cap screw (M3, length 12) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Compatible motor Motor models Panasonic Co., Ltd. MSMD01(0W) 66 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM08 Reference Number MC-BK08-146-00 j37 j37 Y Z 44 Y Motor bracket (A ) 1) (Black anodized aluminum) 1 37 Section Y-Y Z 18 42 4-j drill thru (30) +0.0 j4g7 +0.040 1 4-M4 0.7 tap thru PCD 46, 90 equally spaced (44) (Dimension for coupling) 2) 1) 3) (4) 44 4 (64) 1 1 1 18 70 (27) (64) (4) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M4, length 20) 2) Hexagon socket head cap screw (M4, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Yaskawa Electric Corp. Mitsubishi Electric Corp. Sanyo Denki Co., Ltd. Compatible motor Motor models SGMJV-01A(0W), SGMAV-01A(0W), SGMAV- C2A(10W) HF-KP13(0W), HF-MP13(0W), HC-KFS13(0W), HC-MFS13(0W) P30B04003(30W), P30B0400(0W), P30B040(0W) MCM08 Reference Number MC-BK08-160-00 j37 j37 Y Z 44 Y 1) Motor bracket (A ) (Black anodized aluminum) 1 37 (4) 44 3 Section Y-Y 4-j drill thru (30) +0.01 j4g7 +0.04 18 42 Z 1 1 (27) 4-M4 0.7 tap thru PCD 60, 90 equally spaced j0 +0.1 (44) +0.0 (Dimension for coupling) (4) 2) 1) 3) 4 (64) 1 18 70 (64) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M4, length 20) 2) Hexagon socket head cap screw (M4, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Sanyo Denki Co., Ltd. Compatible motor Motor models P0B000(0W), P0B00(0W), P0B0020(200W) Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 67

MCM Series Lightweight Type MCM08 Reference Number MC-BK08-170-00 j37 j46 Y Z 44 Y Motor bracket (A ) 1) (Black anodized aluminum) 1 37 3. Section Y-Y 4-j drill thru (30) +0.01 j4g7 +0.04 Z 18 42 4-M 0.8 tap thru PCD 70, 90 equally spaced j0 +0.1 +0.0 (44) (Dimension for coupling) 2) 1) 3) (4) 44 1 1 (30) (60) 4 (64) 1 18 70 (64) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M4, length 20) 2) Hexagon socket head cap screw (M, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Yaskawa Electric Corp. Mitsubishi Electric Corp. OMRON Corp. Sanyo Denki Co., Ltd. Compatible motor Motor models SGMJV-02A(200W), SGMAV-02A(200W), SGMJV-04A(400W), SGMAV-04A(400W) HF-KP23(200W), HF-MP23(200W), HF-KP43(400W), HF-MP43(400W), HC-KFS23(200W), HC-MFS23(200W), HC-KFS43(400W), HC-MFS43(400W) R88M-W20(200W), R88M-W40(400W) P30B06020(200W), P30B06040(400W) MCM08 Reference Number MC-BK08-170-01 j37 j46 Y Z +0.01 j4g7 +0.04 Z 18 42 4-M4 0.7 tap thru PCD 70, 90 equally spaced +0.1 j0+0.0 (44) (Dimension for coupling) (4) 44 1 1 (30) (60) 44 Y Motor bracket (A ) 1) (Black anodized aluminum) 1 37 3. Section Y-Y 4-j drill thru (30) 2) 1) 3) 4 (64) 1 18 70 (64) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M4, length 20) 2) Hexagon socket head cap screw (M4, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Panasonic Co., Ltd. Compatible motor Motor models MSMD02(200W), MAMA02(200W), MSMD04(400W), MAMA04(400WW) 68 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM08 Reference Number MC-BK08-20-00 j37 j37 Y Z 44 Y Motor bracket (A ) 1) (Black anodized aluminum) 1 37 Section Y-Y 4-j drill thru (30) 4G7 +0.04 Z 18 42 +0.01 4-M4 0.7 tap thru (44) (Dimension for coupling) 2) 1) 3) (4) 44 1 1 (30) 0 (60) 4 (64) 1 18 70 0 (64) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M4, length 20) 2) Hexagon socket head cap screw (M4, length 14) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Compatible motor Motor models Sanyo Denki Co., Ltd. Oriental Motor Co., Ltd. PBM603xxx, PBM604xxx, 3F78xx AS66, ASC66, UPK6xx, PK6xx, CSK6x, CFK6x, UFK6x MCM08 Reference Number MC-BK08-190-00 Z 13 47 j37 j0 Y 86 70 Y Motor bracket (A ) 1) (Black anodized aluminum) Section Y-Y 4-j drill thru (30) 4 4-M 0.8 tap thru PCD 90, 90 equally spaced Z 20 48 j4g7 +0.040 +0.0 20 1 j70 +0. +0.0 18 (0) (Dimension for coupling) 2) 1) 3) (4) 44 4 (70) 18 20 112 80 1111 (43) (86) (86) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M4, length 22) 2) Hexagon socket head cap screw (M, length 16) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Sanyo Denki Co., Ltd. Compatible motor Motor models P0B07020(200W), P0B07030(300W), P0B07040(400W) Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 69

MCM Series Lightweight Type MCM08 Reference Number MC-BK08-270-00 Z 13 47 j37 j0 Y Y Motor bracket (A ) 1) (Black anodized aluminum) Section Y-Y 4-j drill thru (30) 3 j4g7 +0.040 +0.0 Z 20 48 20 18 1 4-M 0.8 tap thru +0. j60 +0.0 (0) (Dimension for coupling) 2) 1) 3) (4) 44 4 (70) 18 20 112 80 1111 (43) 70 (86) 70 (86) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M4, length 22) 2) Hexagon socket head cap screw (M, length 16) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Oriental Motor Co., Ltd. Sanyo Denki Co., Ltd. Compatible motor Motor models AS98, UPK9x, PK9x, CSK9x, CFK9x, UFK9x 3F8xx MCM Reference Number MC-BK-170-00 j1 4-j6 drill thru (62) 2 Section Y-Y (36) j1 +0.04 +0.01 j63g7 Y 24 9 22 Z Z 20 20 12 0 12 Y Motor bracket (A ) 1) (Black anodized aluminum) 4-M 0.8 tap thru PCD 70, 90 equally spaced (86) 20 46 (j1) (Diameter for coupling) 1) 2) 3) 66 (80) 22 24 9 12 (43) (86) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M, length 30) 2) Hexagon socket head cap screw (M, length 16) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Yaskawa Electric Corp. Mitsubishi Electric Corp. OMRON Corp. Sanyo Denki Co., Ltd. Compatible motor Motor models SGMJV-02A(200W), SGMAV-02A(200W), SGMJV-04A(400W), SGMAV-04A(400W) HF-KP23(200W), HF-MP23(200W), HF-KP43(400W), HF-MP43(400W), HC-KFS23(200W), HC-MFS23(200W), HC-KFS43(400W), HC-MFS43(400W) R88M-W20(200W), R88M-W40(400W) P30B06020(200W), P30B06040(400W) 70 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM Reference Number MC-BK-170-01 Z 20 46 j1 4-j6 drill thru (62) 2 Section Y-Y (36) j1 +0.04 +0.01 j63g7 Y 24 9 22 Z 20 20 12 0 12 Y Motor bracket (A ) 1) (Black anodized aluminum) 4-M4 0.7 tap thru PCD 70, 90 equally spaced (86) (j1) (Diameter for coupling) 1) 2) 3) 66 (80) 22 24 9 12 (43) (86) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M, length 30) 2) Hexagon socket head cap screw (M4, length 16) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Panasonic Co., Ltd. Compatible motor Motor models MSMD02(200W), MAMA02(200W), MSMD04(400W), MAMA04(400W) MCM Reference Number MC-BK-190-00 Z 20 46 j1 Section Y-Y 4 4-j6 drill thru (36) (62) 2 j1 +0.04 +0.01 j63g7 Y 24 9 22 Z 20 20 12 0 12 Y Motor bracket (A ) 1) (Black anodized aluminum) 4-M 0.8 tap thru PCD 90, 90 equally spaced +0.0 j70 +0. (86) (j1) (Diameter for coupling) 1) 2) 3) 66 (80) 22 24 9 12 (43) (86) Section Z-Z Monocarrier Motor Hexagon socket head cap screw (M, length 30) 2) Hexagon socket head cap screw (M, length 16) 3) Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Panasonic Co., Ltd. Sanyo Denki Co., Ltd. Compatible motor Motor models MSMD08(70W), MAMA08(70W) P0B07020(200W), P0B07030(300W), P0B07040(400W) Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 71

MCM Series Lightweight Type MCM Reference Number MC-BK-270-00 Notes: 1. Be sure to align centerlines when installing motor. 2. Be careful in the assembly orientation of bracket. 3. Because bracket is made by sand casting, external dimensions are for reference only. Maker Sanyo Denki Co., Ltd. Oriental Motor Co., Ltd. Compatible motor Motor models 3F8xx AS98, UPK9x, PK9x, CSK9x, CFK9x, UFK9x 72 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Motor Brackets for MCM Series by Japanese Motor Manufacturer Table 2- Model No. MCM02 MCM03 MCM0 MCM06 MCM08 MCM Reference Motor bracket Stepping motor Wattage of AC servo motor Motor manufacturer No. code reference no. model no. 20 30 0 60 0 10 200 300 400 70 1 MC-BK02-128-00 Yaskawa Electric Corp. SGMM-A1 SGMM-A2 2 MC-BK02-133-00 Mitsubishi Electric Corp. HC-AQ013 HC-AQ023 3 MC-BK02-223-00 PMU33/3 (-phase) Oriental Motor Co., Ltd. PMC33/3 (-phase) Yaskawa Electric Corp. SGMAH-A3 SGMJV-AA SGMJV-01A SGMAV-AA SGMAV-01A SGMAV-C2A HF-KP03 HF-KP13 1 MC-BK03-146-00 Mitsubishi Electric Corp. HF-MP03 HF-MP13 HC-KFS03 HC-KFS13 HC-MFS03 HC-MFS13 OMRON Corp. R88M-W03 R88M-W0 R88M-W Sanyo Denki Co., Ltd. P30B04003 P30B0400 P30B040 2 MC-BK03-148-01 Sanyo Denki Co., Ltd. P0B04006 P0B040 Sanyo Denki Co., Ltd. PBM423xxx Sanyo Denki Co., Ltd. 3Fxx AS46, ASC46, 3 MC-BK03-231-00 UPK4x, PK4x, Oriental Motor Co., Ltd. CSK4x, CFK4x, UMK24x, CSK24x, PK24x 1 MC-BK0-14-00 Panasonic Co., Ltd. MSMDA MSMD01 Yaskawa Electric Corp. SGMAH-A3 SGMJV-AA SGMJV-01A SGMAV-AA SGMAV-01A SGMAV-C2A 2 MC-BK0-146-00 Mitsubishi Electric Corp. HF-KP03 HF-MP03 HC-KFS03 HC-MFS03 OMRON Corp. R88M-W03 R88M-W0 R88M-W Sanyo Denki Co., Ltd. P30B04003 P30B0400 P30B040 3 MC-BK0-148-00 Panasonic Co., Ltd. MAMA01 4 MC-BK0-160-00 Sanyo Denki Co., Ltd. P0B000 P0B00 P0B0020 Sanyo Denki Co., Ltd. PBM603xx, PB- M604xx Sanyo Denki Co., Ltd. 3F78xx MC-BK0-20-00 AS66, ASC66, Oriental Motor Co., Ltd. UPK6x, UFK6x, PK6x, CSK6x, CFK6x 1 MC-BK06-14-00 Panasonic Co., Ltd. MSMDA MSMD01 Yaskawa Electric Corp. SGMJV-AA SGMJV-01A SGMAV-AA SGMAV-01A SGMAV-C2A HF-KP03 HF-KP13 2 MC-BK06-146-00 Mitsubishi Electric Corp. HF-MP03 HF-MP13 HC-KFS03 HC-KFS13 HC-MFS03 HC-MFS13 OMRON Corp. R88M-W03 R88M-W0 R88M-W Sanyo Denki Co., Ltd. P30B04003 P30B0400 P30B040 3 MC-BK06-148-00 Sanyo Denki Co., Ltd. P0B04006 P0B040 Panasonic Co., Ltd. MAMA01 4 MC-BK06-160-00 Sanyo Denki Co., Ltd. P0B000 P0B00 P0B0020 Yaskawa Electric Corp. SGMJV-02A SGMJV-04A SGMAV-02A SGMAV-04A HF-KP23 HF-KP43 MC-BK06-170-00 Mitsubishi Electric Corp. HF-MP23 HF-MP43 HC-KFS23 HC-KFS43 HC-MFS23 HC-MFS43 OMRON Corp. R88M-W20 R88M-W40 Sanyo Denki Co., Ltd. P30B06020 P30B06040 6 MC-BK06-170-01 Panasonic Co., Ltd. MSMD02 MSMD04 MAMA02 MAMA04 Sanyo Denki Co., Ltd. PBM603xxx, PBM604xxx Sanyo Denki Co., Ltd. 3F78xx 7 MC-BK06-20-00 AS66, ASC66, Oriental Motor Co., Ltd. UPK6x, PK6x, CSK6x, CFK6x, UFK6x 1 MC-BK08-14-00 Panasonic Co., Ltd. MSMD01 Yaskawa Electric Corp. SGMJV-01A SGMAV-01A SGMAV-C2A HF-KP13 2 MC-BK08-146-00 HF-MP13 Mitsubishi Electric Corp. HC-KFS13 HC-MFS13 Sanyo Denki Co., Ltd. P30B04003 P30B0400 P30B040 3 MC-BK08-160-00 Sanyo Denki Co., Ltd. P0B000 P0B00 P0B0020 Yaskawa Electric Corp. SGMJV-02A SGMJV-04A SGMAV-02A SGMAV-04A HF-KP23 HF-KP43 4 MC-BK08-170-00 Mitsubishi Electric Corp. HF-MP23 HF-MP43 HC-KFS23 HC-KFS43 HC-MFS23 HC-MFS43 OMRON Corp. R88M-W20 R88M-W40 Sanyo Denki Co., Ltd. P30B06020 P30B06040 MC-BK08-170-01 Panasonic Co., Ltd. MSMD02 MSMD04 MAMA02 MAMA04 6 MC-BK08-190-00 Sanyo Denki Co., Ltd. P0B07020 P0B07030 P0B07040 Sanyo Denki Co., Ltd. PBM603xxx, PBM604xxx Sanyo Denki Co., Ltd. 3F78xx 7 MC-BK08-20-00 AS66, ASC66, Oriental Motor Co., Ltd. UPK6x, PK6x, CSK6x, CFK6x, UFK6x Sanyo Denki Co., Ltd. 3F8xx 8 MC-BK08-270-00 AS98, UPK9x, Oriental Motor Co., Ltd. PK9x, CSK9x, CFK9x, UFK9x Yaskawa Electric Corp. SGMJV-02A SGMJV-04A SGMAV-02A SGMAV-04A HF-KP23 HF-KP43 1 MC-BK-170-00 Mitsubishi Electric Corp. HF-MP23 HF-MP43 HC-KFS23 HC-KFS43 HC-MFS23 HC-MFS43 OMRON Corp. R88M-W20 R88M-W40 Sanyo Denki Co., Ltd. P30B06020 P30B06040 2 MC-BK-170-01 Panasonic Co., Ltd. HF-KP13 HF-MP13 HC-KFS13 HC-MFS13 Panasonic Co., Ltd. 3 MC-BK-190-00 Sanyo Denki Co., Ltd. P0B07020 P0B07030 P0B07040 Sanyo Denki Co., Ltd. 3F8xx 4 MC-BK-270-00 AS98, UPK9x, Oriental Motor Co., Ltd. PK9x, CSK9x, CFK9x, UFK9x MSMD02 MAMA02 MSMD04 MAMA04 MSMD08 MAMA08 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 73

MCM Series Lightweight Type 2.3. Combining Brackets Please ask NSK for bracket not shown. MCM02 to MCM02 Combining Bracket Reference Number: MC-IK0202-D-31 MCM03 to MCM02 Combining Bracket Reference Number: MC-IK0302-D-31 A 4X 3.60 Thru 6 4X M3 x 0. Thru 4X 3.0 A 4X 3.60 Thru 6 4X 3.0 4X M3 x 0. Thru 34 14 34 20 14 3 3 7 24 A 0 12 60 2 ( 2) ( 9.3) SECTION A-A 26 A 0 18 70 3 ( 12.70) SECTION A-A ( 2) 9.3 2 12.70 2 19.60 22.0 Description Part Number Qty MCM02 to MCM02 Combining Bracket UB890202D-301 1 M3x6 Socket Head Cap Screw TAB3x6 4 M3x6 Button Head Cap Screw GF4-91239A111 4 Description Part Number Qty MCM03 to MCM02 Combining Bracket UB890302D-301 1 M3x8 Socket Head Cap Screw TAB3x8 4 M3x8 Button Head Cap Screw GF4-91239A113 4 MCM03 to MCM03 Combining Bracket Reference Number: MC-IK0303-D-31 MCM0 to MCM03 Combining Bracket Reference Number: MC-IK003-D-31 4X 4.8 Thru 8 A 6X M4x0.7 Thru 4X 4.0 18 30 0 16 A 8 3 7.0 40 40 ( 2) 27. 40 ( 12.70) 9 SECTION A-A 12.7 23 2 Description Part Number Qty MCM03 to MCM03 Combining Bracket UB890303D-30X 1 M3x8 Socket Head Cap Screw TAB3x8 4 M4x8 Socket Head Cap Screw TAB4x8 6 Description Part Number Qty MCM0 to MCM03 Combining Bracket UB89003D-301 1 M4x8 Socket Head Cap Screw TAB4x8 MCM03 to MCM03 combining bracket can only be used with 1 or 2 mm lead. *When the combining bracket is used, only the top cover and one side cover can be used. 74 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCM0 to MCM0 Combining Bracket Reference Number: MC-IK00-D-32 MCM08 to MCM0 Combining Bracket Reference Number: MC-IK080-D-32 4X 4.8 Thru 8 A 6X M4x0.7 Thru 4X 4.0 4X 7 Thru 11 A 4X 6.80 4X M4 x 0.7 Thru 30 28 60 80 28 0 1 16 3 0 1 A 40 0.70 (3) ( 1.9) SECTION A-A 26 12 1 0 74 A 1.70 (3) (19.0) SECTION A-A 1.9 30.0 3 19.0 6.2 3 Description Part Number Qty MCM0 to MCM0 Combining Bracket UB8900D-30x 1 M4x8 Socket Head Cap Screw TAB4x8 4 M4x12 Socket Head Cap Screw TAB4x12 6 Description Part Number Qty MCM08 to MCM0 Combining Bracket UB89080D-302 1 M4x12 Socket Head Cap Screw TAB4x12 4 M6x14 Socket Head Cap Screw TAB6x14 4 MCM08 to MCM06 Combining Bracket Reference Number: MC-IK0806-D-31 MCM to MCM0 Combining Bracket Reference Number: MC-IK0-D-31 A 4X 7 Thru 11 4X 6.80 A 4X 6.80 4X M x 0.8 Thru 4X M4 x 0.7 Thru 80 32 0 90 28 60 4X 7 Thru 11 24 11.0 1 36. 0 0 A 11 ( 3) ( 19.0) 31 1 1 20 60 0 90 A 20.7 ( 3) (19.0) SECTION A-A 123 SECTION A-A 19.0 19.0 9 3 Description Part Number Qty MCM08 to MCM06 Combining Bracket UB890806D-301 1 Mx16 Socket Head Cap Screw TABx16 4 M6x14 Socket Head Cap Screw TAB6x14 4 Description Part Number Qty MCM to MCM0 Combining Bracket UB890D-301 1 M4x12 Socket Head Cap Screw TAB4x12 4 M6x14 Socket Head Cap Screw TAB6x14 4 *When the combining bracket is used, only the top cover and one side cover can be used. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 7

MCM Series Lightweight Type MCM to MCM06 Combining Bracket Reference Number: MC-IK06-D-31 MCM to MCM08 Combining Bracket Reference Number: MC-IK08-D-3 A 4X 7 Thru 11 4X 6.80 A 4X 7 Thru 11 4X M6 x 1.0 Thru 4X 6.80 4X M x 0.8 Thru 90 0 60 90 32 60 20 1 29 1 16 A 8 11.0 31.0 60 0 A ( 3) (19.0) 11. 31. 60 0 123 ( 3) ( 22.23) SECTION A-A 123 SECTION A-A 3 19.0 3 22.23 2.0 2.0 Description Part Number Qty MCM to MCM06 Combining Bracket UB8906D-302 1 Mx16 Socket Head Cap Screw TABx16 4 M6x14 Socket Head Cap Screw TAB6x14 4 Description Part Number Qty MCM to MCM06 Combining Bracket UB8906D-302 1 Mx16 Socket Head Cap Screw TABx16 4 M6x14 Socket Head Cap Screw TAB6x14 4 *When the combining bracket is used, only the top cover and one side cover can be used. 76 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Notes Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 77

MCH Series Rigid Type 78 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

3.1 MCH Series Reference Number Coding...80 3.2 MCH Series Dimension Table of Standard Products MCL06... 81 MCH06... 82 MCH09...84 MCH...86 3.3 MCH Series Optional Accessories 3.3.1 Sensor Unit...88 3.3.2 Cover Unit...90 3.3.3 Motor Bracket by NEMA Size... 92 3.3.4 Intermediate Plate For Motor... 94 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 79

MCH Series Rigid Type 3 MCH Series 3.1 MCH Series Reference Number Coding [Body] MC MONOCARRIER SERIES H 06 NOMINAL SIZE 040 STROKE H ACCURACY GRADE BALL SCREW LEAD K SLIDER SPECIFICATION (B *1 GREASE SPECIFICATION 0) SPECIAL SPECIFICATION MC: Monocarrier H: MCH Series L: MCH Series Low Profile Rail (only for 06 size) Rail width, unit: mm Unit: mm H: High Precision P: Precision Grade Unit: mm K: Single slider D: Double slider B: Clean Grease LG2 *1: These two code fields shall be added when non-standard grease is used. The coding of an MCH Monocarrier TM with standard grease shall have 12 characters as shown above. [With Optional Accessories] MC S 06 040 H K 0 0 K 0 0 0 OPTIONAL ACCESSORIES S: With MCH optional components R: With MCL optional components NSK MANAGEMENT NUMBER SENSOR UNIT COVER UNIT INTERMEDIATE PLATE FOR MOTOR BRACKET Note: Optional components are available separately. Table 3-1 Sensor Unit (See pages 88-89) Reference Number Code Specification Reference Number 0 N/A 1 Proximity switch (normally close 3 pieces) MC SRHxx 2 Proximity switch (normally open 3 pieces) MC SRHxx 11 3 Proximity switch (normally open 1 piece, normally close 2 pieces) MC SRHxx 12 4 Photo sensor 3 pieces MC SRHxx 13 Notes: 1). xx: Nominal size. 2). Sensor rail is not included in sensor unit. If you require rail, please specify when ordering. Table 3-2 Cover Unit (See pages 90-91) Reference Number Code Specification Reference Number 0 N/A For single slider MC HVxxxxx 00 1 For double slider MC HVxxxxxD00 Note xxxxx: Reference number and stroke number Table 3-3 Intermediate Plate for Motor Bracket (See pages 92-97) Reference Type Number Code MCH06 (MCL06) MCH09 MCH 0 N/A N/A N/A 1 MC-BKH06-14-00 MC-BKH09-14-00 MC-BKH-170-00 2 MC-BKH06-146-00 MC-BKH09-146-00 MC-BKH-170-01 3 MC-BKH06-231-00 MC-BKH09-170-00 MC-BKH-190-00 4 MC-BKH06-20-00 MC-BKH09-170-01 MC-BKH-190-01 MC-BKH09-231-00 MC-BKH-20-00 6 MC-BKH09-20-00 MC-BKH-270-00 80 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

3.2 MCH Series Dimension Table of Standard Products MCL06 2x Accuracy Grade: High Grade (H) 2x The rail of MCL 06 is made lighter than that of MCH 06 by lowering the rail height. The weight ratio between the MCH 06 and MCL 06 is to 4. Double slider specification is also available for the MCL 06. Combinations of stroke and ball screw lead of the MCL 06 are the same as those of the MCH 06. Dimension of MCL06 (Single Slider) Reference number Nominal stroke Dimension of G is 2 for those marked with. Stroke limit (K1 TM is not equipped) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -6 MCL0600H0K 2.38 0 3 (6) 219 10 0 2 MCL0600HK 3.4 MCL060H0K 3.17 0 3 (11) 269 200 0 2 MCL060HK 4.12 MCL06020H0K 4.1 200 203 (21) 369 300 200 3 MCL06020HK.46 MCL06030HK 6.80 300 303 (31) 469 400 300 4 MCL06030H20K 20.60 MCL06040HK 8.13 400 403 (41) 69 00 400 MCL06040H20K 20 11.90 MCL0600HK 9.47 00 03 (1) 669 600 00 6 MCL0600H20K 20 13.30 (kg m 2 ) Mass (kg) 1.0 1.3 1.9 2.6 3.2 3.9 Monocarrier dynamic torque specification (N cm) Ball screw lead 1.0~4.8 1.1~.8 20 ~7.9 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca 20 Ø12 3,000 (High grade) 3,760 (Precision) 1,930 (High grade) 2,260 (Precision) 1,930 (High grade) 2,260 (Precision) Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 33 133 133 22,800 Rated running distance La (km) 18,0 4,400 14,400 20 Ball screw C0a,4 (High grade) 6,3 (Precision) 3,160 (High grade) 3,780 (Precision) 3,160 (High grade) 3,780 (Precision) Linear guides C0 Support unit Load limit (N),900 1,40 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 81

MCH Series Rigid Type MCH06 2 n -j6 thru 4-M 0.8 tap depth 8 j9. c'bore to bottom thicness 3 4. 2-Grease fitting 30 8.6 4 30 2-M3 0. tap depth 6 6. 2-M3 0. tap depth 6 9 2 Accuracy Grade: High Grade (H) 20 30 40 (60) 2-M3 0. tap depth 6 9 0. 4 G:0 0 2 1-M3 0. tap depth (both side) L3 = (n 1) 0 (G:0) 2 2-M3 0. tap depth (both side) 4 0 j6-0.018 (8.) 4-M4 0.7 tap depth 12 PCD34 4-M4 0.7 tap depth 12 PCD40, 90 equally spaced Dimension of MCH06 (Single Slider) Reference number 60 Nominal stroke 0. 32 33 4 16 Stroke limit (without K1 TM ) L2 Ball screw lead L1 16 4 8 Body length 9 +0. j28 +0.0 44. 44 60 0. 0 2-M3 0. tap depth 8 L1 L2 L3 n 60 3. 23 No. of mounting holes Inertia -6 MCH0600H0K 2.38 MCH0600HK 0 3 (6) 219 10 0 2 3.4 MCH0600H20K 20 7.2 MCH060H0K 3.17 MCH060HK 0 3 (11) 269 200 0 2 4.12 MCH060H20K 20 7.92 MCH06020H0K 4.1 MCH06020HK 200 203 (21) 369 300 200 3.46 MCH06020H20K 20 9.26 MCH06030H0K.8 MCH06030HK 300 303 (31) 469 400 300 4 6.8 MCH06030H20K 20.6 MCH06040H0K 7.18 MCH06040HK 400 403 (41) 69 00 400 8.13 MCH06040H20K 20 11.9 MCH0600H0K 8.2 MCH0600HK 00 03 (1) 669 600 00 6 9.47 MCH0600H20K 20 13.3 Dimension of G is 2 instead of 0 for those marked with. (kg m 2 ) Mass (kg) 1.8 2.2 3.0 3.7 4..2 Monocarrier dynamic torque specification (N cm) Ball screw lead Basic Load Rating 1.0~4.8 1.1~.8 20 ~7.9 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca 20 Ø12 3,000 (High grade) 3,760 (Precision) 1,930 (High grade) 2,260 (Precision) 1,930 (High grade) 2,260 (Precision) Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 33 133 133 22,800 Rated running distance La (km) 18,0 4,400 14,400 20 Ball screw C0a,4 (High grade) 6,3 (Precision) 3,160 (High grade) 3,780 (Precision) 3,160 (High grade) 3,780 (Precision) Linear guides C0 Support unit Load limit (N),900 1,40 82 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCH06 (Double Slider) 2-M3 0. tap depth 6 4-M 0.8 tap depth 8 8.6 2-Grease fitting 8.6 2-M3 0. tap depth 6 4-M 0.8 tap depth 8 Accuracy Grade: High Grade (H) 2 n -j6 thru j9. c'bore to bottom thicness 3 4. 30 4 4 30 30 6. 2-M3 0. tap depth 6 2 20 30 30 40 (60) 0 9j6-0.018 2-M3 0. tap depth 6 0 Slider Sub slider 9 0. 4 G:0 2 1-M3 0. tap depth (both side) L3 = (n 1) 0 88 min (G:0) 2 2-M3 0. tap depth (both side) 4 (8.) 4-M4 0.7 tap depth 12 PCD34 4-M4 0.7 tap depth 12 PCD40, 90 equally spaced 60 0. 32 33 4 16 L2 L1 16 4 8 9 +0. j28 +0.0 44. 44 60 0. 0 2-M3 0. tap depth 8 60 3. 23 Dimension of MCH06 (Double Slider) Reference number Nominal stroke Stroke limit (K1 TM is not equipped) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -6 MCH060H0D 4.82 0 11 (139) 369 300 200 3 MCH060HD 6.72 MCH06020H0D 8.06 200 21 (230) 469 400 300 4 MCH06020HD 1.7 MCH06030H0D 9.4 300 31 (339) 69 00 400 MCH06030HD 17.0 MCH06040HD.7 400 41 (439) 669 600 00 6 MCH06040H20D 20 18.3 (kg m 2 ) Mass (kg) 3. 4.2.0.7 Monocarrier dynamic torque specification (N cm) 1.2~.2 Ball screw lead 1.~9.6 20 2.3~11.8 Basic Load Rating 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a 3,000 (High grade),4 (High grade) 22,800 3,760 (Precision) 6,3 (Precision) Ø12 1,930 (High grade) 3,160 (High grade) 18,0 4,400 2,260 (Precision) 3,780 (Precision) 20 1,930 (High grade) 3,160 (High grade) 14,400 20 2,260 (Precision) 3,780 (Precision) Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Double 770 730 730 Linear guides C0 Support unit Load limit (N) 16,300 1,40 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 83

MCH Series Rigid Type MCH09 Accuracy Grade: High Grade (H) Dimension of MCH09 (Single Slider) Reference number Nominal stroke Stroke limit (without K1 TM ) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -6 MCH090H0K 9.2 MCH090HK 0 7 (121) 339. 240 0 2.7.0 MCH090H20K 20 16.8 MCH09020H0K 12.4 MCH09020HK 200 207 (221) 439. 340 200 3 13.9 6. MCH09020H20K 20 20.0 MCH09030H0K 1.6 MCH09030HK 300 307 (321) 39. 440 300 4 17.1 8.1 MCH09030H20K 20 23.2 MCH09040H0K 18.8 MCH09040HK 400 407 (421) 639. 40 400 20.3 9.7 MCH09040H20K 20 26.4 MCH0900H0K 22.0 MCH0900HK 00 07 (21) 739. 640 00 6 23. 11.0 MCH0900H20K 20 29.6 MCH09060H0K 2.2 MCH09060HK 600 607 (621) 839. 740 600 7 26.7 13.0 MCH09060H20K 20 32.8 MCH09070H0K 28.4 MCH09070HK 700 707 (721) 939. 840 700 8 30.0 14. MCH09070H20K 20 36.0 MCH09080H0K 3 MCH09080HK 800 807 (821) 1,039.0 940 800 9 33.2 16.0 MCH09080H20K 20 39.2 (kg m 2 ) Mass (kg) Monocarrier dynamic torque specification (N cm) Ball screw lead 1.0~.9 2.0~7.8 20 2.0~.8 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a 6,820 (High grade) 13,200 (High grade) 40,600 7,0 (Precision) 13,000 (Precision) Ø1,1 (High grade) 9,290 (High grade) 32,200 7,0 7,060 (Precision) 12,700 (Precision) 20 3,290 (High grade),620 (High grade) 2,00 20 4,60 (Precision) 7,70 (Precision) Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 890 38 38 Linear guides C0 Support unit Load limit (N) 30,00 3,040 84 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCH09 (Double Slider) Accuracy Grade: High Grade (H) 4-M6 1.0 tap depth 12 2 n -j7 thru j11 c'bore to bottom thicness 4. 2-M4 0.7 4. tap depth 8 4-M6 1.0 tap depth 12 2-M3 0. tap depth 6 121 121 8 8 46 46 2-M3 0. tap depth 6 7. 2-M4 0.7 tap depth 8 18 36. 44 46 46 46 70 (61) 4 G:70 0 Slider 2-Grease fitting L3 = (n 1) 0 Sub slider (G:70) 4 0 j -0.022 8 86 0. 1 44. 46 12 2 1-M3 0. tap depth 6 (both side) 4 2. L2 124 min L1 2 2-M3 0. tap depth 6 (both side) 2. 4 8 87. (13) 4 +0. +0.0 j0 63 9. 1 8. 60 4-M4 0.7 tap depth 12 PCD64, 90 equally spaced 4-M4 0.7 tap depth 12 PCD60 60 32 Dimension of MCH09 (Double Slider) Reference number Nominal stroke Stroke limit (K1 TM is not equipped) Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia -6 MCH0901H0D 16.0 10 183 (211) 40 440 300 4 MCH0901HD 19.2 MCH0902H0D 19.3 20 283 (311) 639. 40 400 MCH0902HD 22.4 MCH0903H0D 22. 30 383 (411) 739. 640 00 6 MCH0903HD 2.6 MCH0904HD 28.8 40 483 (11) 839. 740 600 7 MCH0904H20D 20 40.9 MCH0906HD 3.2 60 683 (711) 1,039. 940 800 9 MCH0906H20D 20 47.3 (kg m 2 ) Mass (kg) 8.9 11.0 12.0 14.0 17.0 Monocarrier dynamic torque specification (N cm) Ball screw lead 1.~7.0 2.~.8 20 4.0~17.2 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Basic Load Rating Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) d Ball screw Ca Linear guides C Support unit Ca Rated running distance La (km) Ball screw C0a 6,820 (High grade) 13,200 (High grade) 40,600 7,0 (Precision) 13,000 (Precision) Ø1,1 (High grade) 9,290 (High grade) 32,200 7,0 7,060 (Precision) 12,700 (Precision) 20 3,290 (High grade),620 (High grade) 2,00 20 4,60 (Precision) 7,70 (Precision) Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Double 1,780 2,070 2,070 Linear guides C0 Support unit Load limit (N) 30,00 3,040 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 8

MCH Series Rigid Type MCH 2-M4 0.7 tap depth 7 4-M8 1.2 2 n -j9 thru tap depth 1 j14 c'bore to bottom thicness 6 140 97 0 2-M3 0. tap depth 6 9 2-M4 0.7 tap depth 7 22 3 Accuracy Grade: High Grade (H) 44 0 0 70 (76) 4 G 10 L3 = (n 1) 10 2-Grease fitting (G) 0 j12-0.027 4-M 0.8 tap depth 12 PCD70, 90 equally spaced 99 2. 2 1-M3 0. tap depth 6 (both side) 2 2-M3 0. tap depth 6 (both side) (12) 0 1 1. 1 4 21 L2 L1 21 4 8 94 +0. +0.0 j0 72 63. 0. 63 60 4-M 0.8 tap depth 12 PCD70 60 32 Dimension of MCH (Single Slider) Reference number Nominal stroke Stroke limit (without K1 TM ) Ball screw lead Body length No. of mounting holes Inertia -6 (kg m 2 ) L1 L2 G L3 n MCH0HK 33.2 0 126 (142) 389 280 6 10 2 MCH0H20K 20 41.1 MCH020HK 43.4 200 226 (242) 489 380 40 300 3 MCH020H20K 20 1.3 MCH030HK 3.7 300 326 (342) 89 480 1 40 4 MCH030H20K 20 6 MCH040HK 62.4 400 426 (442) 689 80 6 40 4 MCH040H20K 20 71.8 MCH00HK 74.7 00 26 (42) 789 680 40 600 MCH00H20K 20 82.3 MCH060HK 84.9 600 626 (642) 889 780 1 70 6 MCH060H20K 20 92. MCH070HK 9.1 700 726 (742) 989 880 6 70 6 MCH070H20K 20 3 MCH080HK 800 826 (842) 1,089 980 40 900 7 MCH080H20K 20 113 MCH090HK 116 900 926 (842) 1,189 1,080 1 1,00 8 MCH090H20K 20 123 MCH0HK 126 1,000 1,026 (1,042) 1,289 1,180 6 1,00 8 MCH0H20K 20 133 MCH1HK 136 1,0 1,126 (1,142) 1,389 1,280 40 1,200 9 MCH1H20K 20 143 MCH120HK 146 1,200 1,226 (1,242) 1,489 1,380 1 1,30 MCH120H20K 20 14 Mass (kg) 7.3 9. 12.0 14.0 16.0 19.0 21.0 23.0 2.0 27.0 29.0 32.0 Monocarrier dynamic torque specification (N cm) Ball screw lead Basic Load Rating 2.7~.8 20 3.1~12.7 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) Rated running d Ball screw Ca Linear guides C Support unit Ca Ball screw C0a distance La (km) 8,230 (High grade) 17,0 (High grade) 44,600,900 (Precision) 21,700 (Precision) Ø20 7,600,300 (High grade),300 (High grade) 20 3,400 20 7,060 (Precision) 12,700 (Precision) Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 1,460 6 6 Linear guides C0 Support unit Load limit (N) 42,000 3,380 86 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCH (Double Slider) 2-M4 0.7 tap depth 7 4-M8 1.2 2 n -j9 thru tap depth 1 j14 c'bore to bottom thicness 6 4-M8 1.2 tap depth 1 2-M3 0. tap depth 6 140 140 97 97 0 0 2-M3 0. tap depth 6 9 2-M4 0.7 tap depth 7 22 3 Accuracy Grade: High Grade (H) 44 0 0 0 70 (76) 4 G 10 Slider 2-Grease fitting L3 = (n 1) 10 Sub slider 2-Grease fitting (G) 0 j12-0.027 99 2. 2 1-M3 0. tap depth 6 (both side) 144 min 2 2-M3 0. tap depth 6 (both side) (12) 4-M 0.8 tap depth 12 PCD70, 90 equally spaced 0 1. 1 1 4 21 L2 L1 21 4 8 94 +0. +0.0 j0 72 63. 0. 63 60 4-M 0.8 tap depth 12 PCD70 60 32 Dimension of MCH (Double Slider) Reference number Nominal stroke Stroke limit (K1 TM is not equipped) Ball screw lead Body length No. of mounting holes Inertia -6 (kg m 2 ) L1 L2 G L3 n MCH02HD 67.1 20 282 (314) 689 80 6 40 4 MCH02H20D 20 82.4 1 MCH03HD 77.3 30 382 (414) 789 680 40 600 MCH03H20D 20 92. 17 MCH04HD 87. 40 482 (14) 889 780 1 70 6 MCH04H20D 20 3 20 MCH0HD 97.7 0 82 (614) 989 880 6 70 6 MCH0H20D 20 113.0 22 MCH06HD 8.0 60 682 (714) 1,089 980 40 900 7 MCH06H20D 20 123.0 24 MCH07H20D 70 782 (814) 20 1,189 1,080 1 1,00 8 133.0 26 MCH08H20D 80 882 (914) 20 1,289 1,180 6 1,00 8 143.0 28 MCH09H20D 90 982 (1,014) 20 1,389 1,280 40 1,200 9 14.0 30 MCHH20D 1,00 1,082 (1,114) 20 1,489 1,380 1 1,30 164.0 33 Mass (kg) Monocarrier dynamic torque specification (N cm) Ball screw lead Basic Load Rating 4.2~1.6 20.0~19.6 1. Frictional resistance of NSK K1 TM is included in dynamic torque in table. 2. Grease is packed into ball screw, linear guide parts and support unit. 3. Consult NSK for life estimates under large moment loads. Lead Shaft dia Basic dynamic load rating (N) Basic static load rating (N) Rated running d Ball screw Ca Linear guides C Support unit Ca Ball screw C0a distance La (km) 8,230 (High grade) 17,0 (High grade) 44,600,900 (Precision) 21,700 (Precision) Ø20 7,600,300 (High grade),300 (High grade) 20 3,400 20 7,060 (Precision) 12,700 (Precision) Basic Static Moment Load of Linear Guide Basic static moment load (N m) Slider Rolling MRO Pitching MPO Yawing MYO Single 2,920 3,430 3,430 Linear guides C0 Support unit Load limit (N) 42,000 3,380 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 87

MCH Series Rigid Type 3.3 MCH Series Optional Accessories 3.3.1 Sensor Unit Proximity Switch (Example of assembly) Quantity *See page 24 for specification of proximity switch. Type Reference Number Dimension (A) Dimension (B) Body width W MCH06 MC-SRH06- MC-SRH06-11 MC-SRH06-12 17 60 MCH09 MC-SRH09- MC-SRH09-11 MC-SRH09-12 16 21 86 MCH MC-SRH- MC-SRH-11 MC-SRH-12 16 16 0 Proximity switch (normally open contact) 3 1 E2S-W13 (OMRON Corp.) Proximity switch (normally close contact) 3 2 E2S-W14 (OMRON Corp.) A sensor unit consists of sensors and sensor mounting parts. Photo Sensor Sensor rail is not included in a sensor unit. Type NPN Sensor Reference Number PNP Sensor Reference Number (Example of assembly) Dimension (C) Dimension (D) Body width W Remarks MCH06 MC-SRH06-13 MC-SRH06-36 24 2 60 EE-SX674 (OMRON Corp.) MCH09 MC-SRH09-13 MC-SRH09-40 23 12 86 EE-SX674P (OMRON Corp.) 3 sets MCH MC-SRH-13 MC-SRH-31 23 16 0 (EE-01 connector attachment) *See page 2 for specification of photo sensor. A sensor unit consists of sensors and sensor mounting parts. Sensor Rail Reference Number: MC-SRL- * * * * * * * * is the same as rail dimension L 2. Note: For combinations of sensors and rails, see page 91. 88 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCH Series and Sensor Rail Combination Table Table 3-4 Model No. Body length L2 Reference No. Sensor rail reference No. 10 MCH0600H0K MCH0600HK MC-SRL-010 MCH0600H20K 200 MCH060H0K MCH060HK MC-SRL-0200 MCH060H20K 300 MCH06020H0K MCH06020HK MCH06020H20K MCH060H0D MCH060HD MC-SRL-0300 MCH06030H0K MCH06 MCH06030HK 400 MCH06030H20K MC-SRL-0400 MCH06020H0D MCH06020HD 00 MCH06040H0K MCH06040HK MCH06040H20K MC-SRL-000 MCH06030H0D MCH06030HD 600 MCH0600H0K MCH0600HK MCH0600H20K MCH06040HD MCH06040H20D MC-SRL-0600 10 MCL0600H0K MCL0600HK MC-SRL-010 200 MCL060H0K MCL060HK MC-SRL-0200 MCL06 300 MCL06020H0K MCL06020HK MC-SRL-0300 400 MCL06030HK MCL06030H20K MC-SRL-0400 00 MCL06040HK MCL06040H20K MC-SRL-000 600 MCL0600HK MCL0600H20K MC-SRL-0600 240 MCH090H0K MCH090HK MC-SRL-0240 MCH090H20K 340 MCH09020H0K MCH09020HK MC-SRL-0340 MCH09020H20K 440 MCH09030H0K MCH09030HK MCH09030H20K MCH0901H0D MCH0901HD MC-SRL-0440 MCH09040H0K MCH09 MCH09040HK 40 MCH09040H20K MC-SRL-040 MCH0902H0D MCH0902HD 640 MCH0900H0K MCH0900HK MCH0900H20K MC-SRL-0640 MCH0903H0D MCH0903HD 740 MCH09060H0K MCH09060HK MCH09060H20K MCH0904HD MCH0904H20D MC-SRL-0740 Model No. Body length L2 Reference No. Sensor rail reference No. MCH09070H0K 840 MCH09070HK MCH09070H20K MC-SRL-0840 MCH09 MCH09080H0K MCH09080HK 940 MCH09080H20K MCH0906HD MCH0906H20D MC-SRL-0940 280 MCH0HK MCH0H20K MC-SRL-0280 380 MCH020HK MCH020H20K MC-SRL-0380 480 MCH030HK MCH030H20K MC-SRL-0480 80 MCH040HK MCH02HD MC-SRL-080 MCH00HK 680 MCH00H20K MCH03HD MCH03H20D MC-SRL-0680 MCH060HK 780 MCH060H20K MCH04HD MCH04H20D MC-SRL-0780 MCH070HK MCH 880 MCH070H20K MCH0HD MCH0H20D MC-SRL-0880 MCH080HK 980 MCH080H20K MCH06HD MCH06H20D MC-SRL-0980 MCH090HK 1,080 MCH090H20K MCH07H20D MC-SRL-80 MCH0HK 1,180 MCH0H20K MCH08H20D MC-SRL-1180 MCH1HK 1,280 MCH1H20K MCH09H20D MC-SRL-1280 MCH120HK 1,380 MCH120H20K MCHH20D MC-SRL-1380 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 89

MCH Series Rigid Type 3.3.2 Cover Unit Cover Unit for MCH06 Cover Unit for MCL06 (Unit: mm) Single Slider Double Slider Top cover length L Stroke Reference Number Stroke Reference Number 0 MC-HV0600-00 170 0 MC-HV060-00 220 200 MC-HV06020-00 0 MC-HV060D00 320 300 MC-HV06030-00 200 MC-HV06020D00 420 400 MC-HV06040-00 300 MC-HV06030D00 20 00 MC-HV0600-00 400 MC-HV06040D00 620 Cover Unit for MCH09 (Unit: mm) Single Slider Double Slider Top cover length L Stroke Reference Number Stroke Reference Number 0 MC-HV090-00 264 200 MC-HV09020-00 364 300 MC-HV09030-00 10 MC-HV0901D00 464 400 MC-HV09040-00 20 MC-HV0902D00 64 00 MC-HV0900-00 30 MC-HV0903D00 664 600 MC-HV09060-00 40 MC-HV0904D00 764 700 MC-HV09070-00 864 800 MC-HV09080-00 60 MC-HV0906D00 964 90 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Cover Unit for MCH (Unit: mm) Single Slider Double Slider Top cover length L Stroke Reference Number Stroke Reference Number 0 MC-HV0-00 3 200 MC-HV020-00 4 300 MC-HV030-00 400 MC-HV040-00 20 MC-HV02D00 6 00 MC-HV00-00 30 MC-HV03D00 7 600 MC-HV060-00 40 MC-HV04D00 8 700 MC-HV070-00 0 MC-HV0D00 9 800 MC-HV080-00 60 MC-HV06D00 1,0 900 MC-HV090-00 70 MC-HV07D00 1,1 1,000 MC-HV0-00 80 MC-HV08D00 1,2 1,0 MC-HV1-00 90 MC-HV09D00 1,3 1,200 MC-HV120-00 1,00 MC-HVD00 1,4 Cover Unit for Double Sliders (Reference Drawing) Two spacers are attached for the double slider. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 91

MCH Series Rigid Type 3.3.3 Motor Bracket by NEMA Size MCH06 (NEMA 23) Reference Number MC-BKH06-247-31 Included: 4 pcs M4x0.7x8 Socket Head Cap Screws MCH09 (NEMA 23) Reference Number MC-BKH09-247-31 Included: 4 pcs M4x0.7x Socket Head Cap Screws 92 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

MCH09 (NEMA 34) Reference Number MC-BKH09-269-31 Included: 4 pcs M4x0.7x Socket Head Cap Screws MCH (NEMA 34) Reference Number MC-BKH-269-31 Included: 4 pcs Mx0.8x Socket Head Cap Screws Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 93

MCH Series Rigid Type 3.3.4 Intermediate Plate for Motor If you have a motor not listed below, please contact NSK. If you have an indirect motor mount, please contact NSK. Motor Bracket for MCH06 and MCL06 Reference Number: MC-BKH06-14-00 Be sure to align the center lines when installing the motor. Reference Number: MC-BKH06-146-00 Compatible motor Compatible motor Maker Yaskawa Electric Corp. Mitsubishi Electric Corp. Motor models SGMAH-A3(30W), SGMJV-AA(0W), SGMAV-AA(0W), SGMJV-01A(0W), SGMAV-01A(0W) HF-KP03(0W), HF-MP03(0W), HC-KFS03(0W), HC-MFS03(0W), HF-KP13(0W), HF-MP13(0W), HC-KFS13(0W), HC-MFS13(0W) Maker Motor models OMRON Corp. R88M-W03(30W), R88M-W0(0W), R88M-W(0W) Panasonic Co., Ltd. MSMDA(0W), MSMD01(0W) Sanyo Denki Co., Ltd. P30B04xxx P Series Reference Number: MC-BKH06-231-00 Reference Number: MC-BKH06-20-00 Compatible motor Compatible motor Maker Oriental Motor Co. Ltd. Motor models AS46, ASC46, UPK4x, PK4x, CSK4x, CFK4x, UMK24x, CSK24x, PK24x Maker Oriental Motor Co. Ltd. Motor models AS66, ASC66, UPK6x, UFK6x, PK6x, CSK6x, CFK6x, MUMS02(200W), MUMS04(400W) Sanyo Denki Co., Ltd. PBM423xxx, 3Fxx Sanyo Denki Co., Ltd. PBM603xx, PBM604xx, 3F78xx Diameter of ball screw shaft end to install a pulley for indirect motor mount of MCH06 94 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Motor Bracket for MCH09 Reference Number: MC-BKH09-14-00 MC-BKH09-146-00 Reference Number: MC-BKH09-170-00 MC-BKH09-170-01 Reference No. Maker MC-BKH09-14-00 Panasonic Co., Ltd. Yaskawa Electric Corp. Mitsubishi Electric Corp. MC-BKH09-146-00 Compatible motor Motor models MSMDA(0W), MSMD01(0W) SGMJV-AA(0W), SGMAV-AA(0W), SGMJV-01A(0W), SGMAV-01A(0W) HF-KP03(0W), HF-MP0(0W), HC-KFS03(0W), HC-MFS03(0W), HF-KP13(0W), HF-MP13(0W), HC-KFS13(0W), HC-MFS13(0W) Reference No. MC-BKH09-170-00 Compatible motor Maker Motor models SGMJV-02A(200W), SGMAV-02A(200W), Yaskawa Electric Corp SGMJV-04A(400W), SGMAV-04A(400W) HF-KP23(200W), HF-MP23(200W), HF-KP43(400W), HF-MP43(400W), Mitsubishi Electric Corp. HC-KFS23(200W), HC-MFS23(200W), HC-KFS43(400W), HC-MFS43(400W) OMRON Corp. R88M-W20(200W), R88M-W40(400W) OMRON Corp. R88M-W0(0W), R88M-W(0W) Sanyo Denki Co., Ltd. P30B06xxx P Series Sanyo Denki Co., Ltd. P30B04xxx P Series MC-BKH09-170-01 Panasonic Co., Ltd. MSMD02(200W), MSMA02(200W), MSMA04(400W), MSMD04(400W) Reference Number: MC-BKH09-231-00 Reference Number: MC-BKH09-20-00 Compatible motor Compatible motor Maker Motor models Maker Motor models Sanyo Denki Co., Ltd. PBM423xxx, 3Fxx Sanyo Denki Co., Ltd. PBM603xx, PBM604xx, 3F78xx Oriental Motor Co. Ltd. AS46, ASC46, UPK4x, PK4x, CSK4x, CFK4x, UMK24x, CSK24x, PK24x Oriental Motor Co. Ltd. AS66, ASC66, UPK6x, UFK6x, PK6x, CSK6x, CFK6x Diameter of ball screw shaft end to install a pulley for indirect motor mount of MCH09 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 9

MCH Series Rigid Type Motor Bracket for MCH Reference Number: MC-BKH-170-00 MC-BKH-170-01 Reference Number: MC-BKH-190-00 MC-BKH-190-01 Reference No. MC-BKH-170-00 MC-BKH-170-01 Compatible motor Maker Motor models Yaskawa Electric Corp. SGMJV-02A(200W), SGMAV-02A(200W), SGMJV-04A(400W), SGMAV-04A(400W) HF-KP23(200W), HF-MP23(200W), Mitsubishi Electric Corp. HF-KP43(400W), HF-MP43(400W), HC-KFS23(200W), HC-MFS23(200W), HC-KFS43(400W), HC-MFS43(400W) OMRON Corp. R88M-W20(200W), R88M-W40(400W) Sanyo Denki Co., Ltd. P30B06xxx P Series Panasonic Co., Ltd. MSMD02(200W), MSMA02(200W), MSMD04(400W), MSMA04(400W) Compatible motor Reference No. Maker Motor models MC-BKH-190-00 Mitsubishi Electric Corp. HC-KFS73(70W), HC-MFS73(70W), HF-KP73(70W), HF-MP73(70W) MC-BKH-190-01 Sanyo Denki Co., Ltd. P0B07xxx P Series Reference Number: MC-BKH-20-00 Reference Number: MC-BKH-270-00 Maker Compatible motor Motor models Compatible motor Sanyo Denki Co., Ltd. PBM603xx, PBM604xx, 3F78xx Oriental Motor Co. Ltd. AS66, ASC66, UPK6x, PK6x, CSK6x, CFK6x, UMK6x, UFK6X Maker Motor models Oriental Motor Co. Ltd. AS98, ASC98, UPK9x, PK9x, CSK9x, CFK9x, UMK9x, UFK9x Diameter of ball screw shaft end to install a pulley for indirect motor mount of MCH 96 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Intermediate Plates for MCH Series Table 3- Model No. MCH06 MCL06 MCH09 MCH Reference No. code Motor bracket Stepping motor model Wattage of AC servo motor Motor manufacturer reference no. no. 30 0 0 200 400 70 1 MC-BKH06-14-00 Panasonic Co., Ltd. MSMDA MSMD01 Yaskawa Electric SGMJV-AA SGMJV-01A SGMAH-A3 Corp. SGMAV-AA SGMAV-01A HF-KP03 HF-KP13 Mitsubishi Electric HF-MP03 HF-MP13 2 MC-BKH06-146-00 Corp. HC-KFS03 HC-KFS13 HC-MFS03 HC-MFS13 OMRON Corp. R88M-W03 R88M-W0 R88M-W Sanyo Denki Co., P30B04xxx (P 3 MC-BKH06-231-00 4 MC-BKH06-20-00 Ltd. Sanyo Denki Co., Ltd. Oriental Motor Co., Ltd. Sanyo Denki Co., Ltd. Series) PBM423xxx 3Fxx AS46, ASC46 UPK4x, PK4x CSK4x, CFK4x UMK24x, CSK24x PK24x PBM603xx PBM604xx 3F78xx AS66, ASC66 Oriental Motor Co., Ltd. UPK6x, UFK6x PK6x, CSK6x CFK6x OMRON Corp. MUMS02 MUMS04 1 MC-BKH09-14-00 Panasonic Co., Ltd. MSMDA MSMD01 Yaskawa Electric Corp. SGMJV-AA SGMAV-AA SGMJV-01A SGMAV-01A 2 MC-BKH09-146-00 Mitsubishi Electric Corp. HF-KP03 HF-MP0 HC-KFS03 HC-MFS03 HF-KP13 HF-MP13 HC-KFS13 HC-MFS13 3 MC-BKH09-170-00 4 MC-BKH09-170-01 Panasonic Co., Ltd. MC-BKH09-231-00 6 MC-BKH09-20-00 1 MC-BKH-170-00 2 MC-BKH-170-01 Panasonic Co., Ltd. 3 MC-BKH-190-00 4 MC-BKH-190-01 MC-BKH-20-00 6 MC-BKH-270-00 OMRON Corp. R88M-W0 R88M-W Sanyo Denki Co., Ltd. P30B04xxx (P Series) Yaskawa Electric Corp. SGMJV-02A SGMAV-02A SGMJV-04A SGMAV-04A Mitsubishi Electric Corp. HF-KP23 HF-MP23 HC-KFS23 HC-MFS23 HF-KP43 HF-MP43 HC-KFS43 HC-MFS43 OMRON Corp. R88M-W20 R88M-W40 Sanyo Denki Co., Ltd. P30B06xxx (P Series) MSMD02 MSMA02 MSMD04 MSMA04 Sanyo Denki Co., Ltd. PBM423xxx 3Fxx AS46, ASC46 UPK4x, PK4x Oriental Motor Co., CSK4x, CFK4x Ltd. UMK24x, CSK24x PK24x PBM603xx Sanyo Denki Co., PBM604xx Ltd. 3F78xx AS66, ASC66 Oriental Motor Co., UPK6x, UFK6x Ltd. PK6x, CSK6x CFK6x Yaskawa Electric SGMJV-02A SGMJV-04A Corp. SGMAV-02A SGMAV-04A HF-KP23 HF-KP43 Mitsubishi Electric HF-MP23 HF-MP43 Corp. HC-KFS23 HC-KFS43 HC-MFS23 HC-MFS43 OMRON Corp. R88M-W20 R88M-W40 Sanyo Denki Co., P30B06xxx (P Ltd. Series) Mitsubishi Electric Corp. Sanyo Denki Co., Ltd. Sanyo Denki Co., Ltd. Oriental Motor Co., Ltd. Oriental Motor Co., Ltd. P0B07xxx (P Series) PBM603xx PBM604xx 3F78xx AS66, ASC66 UPK6x, PK6x CSK6x, CFK6x UMK6x, UFK6x AS98, ASC98 UPK9x, PK9x CSK9x, CFK9x UMK9x, UFK9x MSMD02 MSMA02 MSMD04 MSMA04 HC-KFS73 HC-MFS73 HF-KP73 HF-MP73 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 97

ToughCarrier TM Roller Type 98 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

4.1 Features...1 4.2 Reference Number Coding...1 4.3 ToughCarrier TM TCH06...2 4.4 ToughCarrier TM TCH09... 4 4. ToughCarrier TM TCH... 6 For complete catalog information on NSK Toughcarrier (TCH Series), please reference e3421 Toughcarrier TM. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 99

ToughCarrier TM Features 0 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

4.1 Features 1 Industry First: Single axis actuator that uses rollers instead of balls for the rolling element. 2 Higher load ratings: More than 2 times compared to standard ball type Monocarrier TM. 3 Increased rigidity and compression rigidity (1. ~ 4 times compared to standard ball type Monocarrier TM ). 4 Interchangeable with Monocarrier TM MCH Series. Standard Feature: Self-lubricating NSK K1 TM units. 4.2 Reference Number Coding TC H 06 030 H 0 K 0 0 TOUGHCARRIER TYPE NOMINAL SIZE STROKE ACCURACY GRADE BALL SCREW LEAD SLIDER SPECIFICATION GREASE SPECIFICATION CONTROL NUMBER TC: Toughcarrier H: Standard S: Optional Parts Rail width, unit: mm Unit: mm H: High Precision P: Precision Grade Unit: mm K: Single slider D: Double slider A: Single short slider B: Double short slider 0: YS2 0: Without Pin Holes 1: With Pin Holes Application: Automotive Manufacturing Equipment, General Industrial Machinery Optional Parts: Cover units, sensor units, and motor brackets are available as standard parts. For special requests, contact NSK. For complete catalog information on NSK Toughcarrier (TCH Series), please reference e3421 Toughcarrier TM. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 1

ToughCarrier TM Roller Type 4.3 ToughCarrier TM TCH06 60 30 Ø4H8 +0 0.018 Thru Ø C Bore 2DP (rail surface) 30 (30.7) 33. Cross Section X-X 2-M3 0. Tap Depth 6 41.4 40 4. Stopper 4 2xn Ø6 thru Ø9. C Bore to bottom thickness of 3 X X 0 G Dimension 0 21 ±0.03 Pin Span 8 1 8 1 1. 1 ±0.03 Pin Span 1. 30. 8 L3=(n-1) 0 9 ±0.03 Pin Span 44 2-Ø4H8 +0 0.018.DP Ø C Bore 1. DP 2-K1 30 6-M 0.8 Tap Depth 8 2-M3 0. Tap Depth 6 4 +0 0.03 (0) G Dimension 40 1. Stopper 21 ±0.03 Pin Span 12. 9 2-K1 8 9 2 1 4-M 0.8 Tap Depth 8 2-Ø4H8 +0 0.018.DP Ø C Bore 1.DP 30 8 8 3. 9 20 2-M3 0. Tap Depth 6 1 2-M3 0. Tap Depth 6 (both sides) 80 46 38 27 44 1 6 Ø4 slot thru Ø C Bore 2DP (rail surface) 4 2-M3 0. Tap Depth 6 1 2-M3 0. Tap Depth 6 (both sides) Ø6h8-0 0.018 Short Slider Ø32h7-0 0.02 9. 60 (0.) 12 4 16 1 2-M3 0. Tap Depth 4 (both sides) L2/2 2. L2 L1 16 4 1. 8 12 28 20 48 23 4-M4 0.7 Tap Depth 8 34 9. 14 (0.) Dimensional Table Reference number Nominal stroke Stroke limit Ball screw lead Body length L1 L2 L3 n No. of mounting holes Inertia - (kg m 2 ) *TCH0600(7)H0K(A)00 2.94 (2.87) *TCH0600(7)HK(A)00 0 (70) 64 (8) 2 10 0 2 3. 38 (3.06) *TCH0600H20K00 20.1 TCH060(12)H0K(A)00 3.74 (3.67) TCH060(12)HK(A)00 0 (120) 114 (13) 260 200 0 2 4.18 (3.86) TCH060H20K00 20.9 TCH06020(22)H0K(A)00.34 (.27) TCH06020(22)HK(A)00 200 (220) 214 (23) 360 300 200 3.78 (.46) TCH06020H20K00 20 7. TCH06030(32)H0K(A)00 6.84 (6.77) TCH06030(32)HK(A)00 300 (320) 314 (33) 460 400 300 4 7.28 (6.96) TCH06030H20K00 20 9 TCH06040(42)H0K(A)00 8.44 (8.37) TCH06040(42)HK(A)00 400 (420) 414 (43) 60 00 400 8.88 (8.6) TCH06040H20K00 20.6 TCH0600(2)H0K(A)00.1 (9.97) TCH0600(2)HK(A)00 00 (20) 14 (3) 660 600 00 6. (.2) TCH0600H20K00 20 12.2 Mass (kg) 2.2 (2.1) 2. (2.4) 3.3 (3.2) 3.9 (3.8) 4.6 (4.).3 (.2) 1) *Indicates reference number with G dimension = 2. 2). Parentheses indicate short slider reference number and dimensions. 3). For double slider specifications, part number and dimensions, contact NSK. 4). For strokes not listed, contact NSK. ). Dimensions above show optional pin holes. 6). Specification for short slider with 20 mm lead is not established. For complete catalog information on NSK Toughcarrier (TCH Series), please reference e3421 Toughcarrier TM. 2 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

ToughCarrier TM TCH06 Accuracy Grades Grade High grade (Unit: mm) Stroke Repeatability Running Parallelism (vertical) Backlash ~200 14 ~400 + 16 20 or less ~600 20 Grade Precision grade Stroke Repeatability Running Parallelism (vertical) Positioning Accuracy Backlash ~200 8 20 ~400 +3 2 3 or less ~600 12 30 Specifications Standard Slider Specifications Reference Model Ball Screw Lead Shaft Dia Basic Dynamic Load Rating (N) Basic Static Load Rating (N) Suporting Unit Limiting Basic Static Moment Load (N) Ball Screw Ca Linear Guide C Support Unit Ca Ball Screw C0a Linear Guide C0 Load (N) Rolling MR0 Pitching MP0 Yawing MY0 3,760 4,000 6,3 TCH06-K Ø12 2,260 20,900 3,700 6,600 3,780 20 2,260 28,300 3,780 4,000 2,700 800 340 340 Short Slider Specifications Reference Model Ball Screw Lead Shaft Dia Basic Dynamic Load Rating (N) Basic Static Load Rating (N) Suporting Unit Limiting Basic Static Moment Load (N) Ball Screw Ca Linear Guide C Support Unit Ca Ball Screw C0a Linear Guide C0 Load (N) Rolling MR0 Pitching MP0 Yawing MY0 TCH06-A 3,760 26,200 6,3 Ø12 12,200 6,600 2,260 20,800 3,780 22,00 2,700 400 8 8 Basic dynamic and static load ratings indicate the values for one slider. Basic dynamic load ratings of the linear guide is based on 0 km fatigue life with unchanging load acting perpendicular to the axis of motion on top of the slider. Basic dynamic load rating of the linear guide is the load in perpendicular direction to the axis of motion that allows 90% of a group of the same ToughCarriers to operate equivalent to 1 million revolutions of the ball screw and support unit under the same condition without causing flaking by rolling contact. Basic dynamic load rating of the ball screw is a load to axial direction that allows 90% of ball screws of a group of the same ToughCarriers to rotate 1 million revolutions under the same condition without causing flaking by rolling contact. Basic static load rating is a load that results when combined permanent deformations at the contact points of balls and ball grooves is 0.01% of the diameter. In case of moment loading when using short slider, use of 2 sliders (double short slider specification) is recommended. For complete catalog information on NSK Toughcarrier (TCH Series), please reference e3421 Toughcarrier TM. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 3

0 0 ToughCarrier TM Roller Type 4.4 ToughCarrier TM TCH09 Ø6H8 +0 0.018 thru Ø8C Bore 2DP Both Sides (rail surface) (6) 2-M4 0.7 Tap Depth 8 4 X 2xn-Ø7 Thru Ø11 C Bore to bottom thickness 4. 19 23 23 30. 23 ±0.03 Pin Span Ø6 slot thru Ø8 C Bore 2DP (rail surface) 2-Ø6H8 +0.018 0 8 DP Ø7 C Bore 2 DP 2-K1 6 +0.03 4 2-M4 0.7 Tap Depth 8 16. 3±0.03 13 ±0.03 23 13 2-K1 46 86 46 43 (43.) 46 17 Cross Section X-X 7. 70 4. Stopper 70 X 0 6-M6 1.0 Tap Depth 8 L3=(n-1) 0 3. 46 3 ±0.03 Pin Span 2-M3 0. Tap Depth 6 8 (70) 70 3. Stopper 2-Ø6H8 +0 0 0.018 8DP Ø7 C Bore 2 DP 13 86 46 1 2-M3 0. Tap Depth 6 4-M6 1.0 Tap Depth 8 1 2-M3 0. Tap Depth 6 (both sides) 8. 124 84 1 1 2-M3 0. Tap Depth 6 (both sides) Øh8-0.022 0 Ø4h7-0.03 Short Slider (1) 8. 86 12 4 2. 1 2-M3 0. Tap Depth 4 (both sides) L2/2 3 L2 L1 2. 4 2 (11) 23 34 34 68 32 4 8. 44 (1) 8. 4-M 0.8 Tap Depth Dimensional Table Reference number Nominal stroke Stroke limit Ball screw lead 1) Parentheses indicate short slider. 2). For double slider specifications, part number and dimensions, contact NSK. 3). For strokes not listed, contact NSK. 4). Dimensions above show optional pin holes. Body length L1 L2 L3 n No. of mounting holes Inertia - (kg m 2 ) TCH090(14)H0K(A)00 9.13 (8.9) TCH090(14)HK(A)00 0 (140) 8 (146) 320 240 0 2 11.0 (.1) TCH090(14)H20K(A)00 20 18.6 (14.6) TCH09020(24)H0K(A)00 14.2 (13.9) TCH09020(24)HK(A)00 200 (240) 208 (246) 420 340 200 3 16.0 (1.1) TCH09020(24)H20K(A)00 20 23.6 (19.6) TCH09030(34)H0K(A)00 18.1 (17.8) TCH09030(34)HK(A)00 300 (340) 308 (346) 20 440 300 4 19.9 (18.9) TCH09030(34)H20K(A)00 20 27. (23.) TCH09040(44)H0K(A)00 21.9 (21.7) TCH09040(44)HK(A)00 400 (440) 408 (446) 620 40 400 23.8 (22.8) TCH09040(44)H20K(A)00 20 31.4 (27.4) TCH0900(4)H0K(A)00 2.9 (2.6) TCH0900(4)HK(A)00 00 (40) 08 (46) 720 640 00 6 27.7 (26.7) TCH0900(4)H20K(A)00 20 3.3 (31.3) TCH09060(64)H0K(A)00 29.4 (29.2) TCH09060(64)HK(A)00 600 (640) 608 (646) 820 740 600 7 31.3 (30.3) TCH09060(64)H20K(A)00 20 38.9 (34.9) TCH09070(74)H0K(A)00 33. (33.3) TCH09070(74)HK(A)00 700 (740) 708 (746) 920 840 700 8 3.4 (34.4) TCH09070(74)H20K(A)00 20 43.0 (39.9) TCH09080(84)H0K(A)00 37.4 (37.2) TCH09080(84)HK(A)00 800 (840) 808 (846) 1 020 940 800 9 (39.3 (38.3) TCH09080(84)H20K(A)00 20 46.9 (42.8) Mass (kg) 6. (6.1) 7.9 (7.) 9.4 (9.0).8 (.4) 12.3 (11.9) 13.6 (13.2) 1.0 (14.6) 16.4 (16.0) For complete catalog information on NSK Toughcarrier (TCH Series), please reference e3421 Toughcarrier TM. 4 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

ToughCarrier TM TCH09 Accuracy Grades (Unit: mm) Grade High grade Stroke Repeatability Running Parallelism (vertical) Backlash ~200 14 ~400 16 ~600 + 20 20 or less ~700 ~800 23 Grade Precision grade Stroke Repeatability Running Parallelism (vertical) Positioning Accuracy Backlash ~200 8 20 ~400 2 ~600 +3 12 30 ~700 1 ~800 3 3 or less Specifications Standard Slider Specifications Reference Model Ball Screw Lead Shaft Dia Basic Dynamic Load Rating (N) Basic Static Load Rating (N) Suporting Unit Limiting Basic Static Moment Load (N) Ball Screw Ca Linear Guide C Support Unit Ca Ball Screw C0a Linear Guide C0 Load (N) Rolling MR0 Pitching MP0 Yawing MY0 7,0 96,800 13,000 TCH09-K Ø1 7,060 44,900 76,800 8,800 12,700 20 4,60 60,900 7,70 96,900,090 2, 1,340 1,340 Short Slider Specifications Reference Model Ball Screw Lead Shaft Dia Basic Dynamic Load Rating (N) Basic Static Load Rating (N) Suporting Unit Limiting Basic Static Moment Load (N) Ball Screw Ca Linear Guide C Support Unit Ca Ball Screw C0a Linear Guide C0 Load (N) Rolling MR0 Pitching MP0 Yawing MY0 7,0 60,0 13,000 TCH09-A Ø1 7,060 27,900 47,700 8,800 12,700 20 4,60 37,800 7,70 2,00,090 1,30 390 390 Basic dynamic and static load ratings indicate the values for one slider. Basic dynamic load ratings of the linear guide is based on 0 km fatigue life with unchanging load acting perpendicular to the axis of motion on top of the slider. Basic dynamic load rating of the linear guide is the load in perpendicular direction to the axis of motion that allows 90% of a group of the same ToughCarriers to operate equivalent to 1 million revolutions of the ball screw and support unit under the same condition without causing flaking by rolling contact. Basic dynamic load rating of the ball screw is a load to axial direction that allows 90% of ball screws of a group of the same ToughCarriers to rotate 1 million revolutions under the same condition without causing flaking by rolling contact. Basic static load rating is a load that results when combined permanent deformations at the contact points of balls and ball grooves is 0.01% of the diameter. In case of moment loading when using short slider, use of 2 sliders (double short slider specification) is recommended. For complete catalog information on NSK Toughcarrier (TCH Series), please reference e3421 Toughcarrier TM. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

ToughCarrier TM Roller Type 4. ToughCarrier TM TCH 2-M4 0.7 Tap Depth 8 4 X 2xn-Ø9 Thru Ø14 C Bore to bottom thickness 4. φ6h8 +0.018 24 2 2 0 Thru 36. (rail surface) 2-Ø6H8 +0 0.018 9 DP Ø7 C Bore 2 DP (top surface) 2-NSK K1 6 +0.03 4 2-M4 0.7 Tap Depth 8 27 19 2-M3 0. 14. 2-Ø6H8 +0 0.018 9 DP Ø7 C Bore 2 DP (top surface) 2-NSK K1 0 0 Ø6 Slot Thru (rail surface) Tap Depth 6 0 0 0 40±0.03 Pin Span Pin Hole Position (49) Cross Section X-X 20 68 70 4. Stopper G X 90 10 40±0.03 Pin Span 36. 61. L3=(n-1) 10 0 2± 0.03 Pin Span 6-M8 1.2 Tap Depth 9 2-M3 0. Tap Depth 6 8 (90) (G) 70 4. Stopper 8 19 17. 19±0.03 39. Pin Span 1 4 1 4-M8 1.2 Tap Depth 9 99. 0 1 2-M3 0. Tap Depth 6 (both sides) (1) 71 1 4 29. 1 2-M3 0. Tap Depth 4 (both sides) L2/2 1 L2 14 98 39 L1 1 2-M3 0. Tap Depth 6 (both sides) 29. 4 2 12 30 36 42 78 φ12h7-00.018 32 4-M6 1.0 Tap Depth Short Slider 62 99. φ63h7-0 0.030 2 0 71 (1) Dimensional Table Reference number Nominal stroke Stroke limit Ball screw lead Body length No. of mounting holes Inertia - (kg m 2 ) L1 L2 L3 G n 373 280 10 6 2 4.27 (4.13) TCH0(16)HK(A)00 0 (160) 126 (170) TCH0(16)H20K(A)00 20.34 (4.74) TCH020(26)HK(A)00.49 (.3) 200 (260) 226 (270) 473 380 300 40 3 TCH020(26)H20K(A)00 20 6.6 (.96) TCH030(36)HK(A)00 6.72 (6.8) 300 (360) 326 (370) 73 480 40 1 4 TCH300(36)H20K(A)00 20 7.79 (7.19) TCH040(46)HK(A)00 7.94 (7.80) 400 (460) 426 (470) 673 80 40 6 4 TCH040(46)H20K(A)00 20 9.01 (8.41) TCH00(6)HK(A)00 9.17 (9.03) 00 (60) 26 (70) 773 680 600 40 TCH00(6)H20K(A)00 20.24 (9.64) TCH060(66)HK(A)00.40 (.26) 600 (660) 626 (670) 873 780 70 1 6 TCH060(66)H20K(A)00 20 11.47 (.87) TCH700(76)HK(A)00 12 (11.48) 700 (760) 726 (770) 973 880 70 6 6 TCH070(76)H20K(A)00 20 12.69 (12.09) TCH080(86)HK(A)00 12.8 (12.71) 800 (860) 826 (870) 1,073 980 900 40 7 TCH080(86)H20K(A)00 20 13.92 (13.32) TCH090(96)HK(A)00 14.07 (13.93) 900 (960) 926 (970) 1,173 1,080 1,00 1 8 TCH090(96)H20K(A)00 20 1.14 (14.4) TCH0(6)HK(A)00 1.29 (1.1) 1,000 (1,060) 1,026 (1,170) 1,273 1,183 1,00 6 8 TCH0(6)H20K(A)00 20 16.36 (1.76) TCH1(116)HK(A)00 16.2 (16.38) 1,0 (1,160) 1,126 (1,170) 1,373 1,280 1,200 40 9 TCH1(116)H20K(A)00 20 17.9 (16.99) TCH120(126)HK(A)00 17.74 (17.60) 1,200 (1,260) 1,270 (1,270) 1,473 1,380 1,30 1 TCH120(126)H20K(A)00 20 18.81 (18.21) Mass (kg) 9.6 (8.9) 11. (.9) 13. (12.8) 1.4 (14.8) 17.4 (16.7) 19.3 (18.6) 21.2 (20.6) 23.2 (22.6) 2.2 (24.) 27.1 (26.) 29.1 (28.4) 31.1 (30.4) 1) Parentheses indicate short slider, reference number and dimensions. 2). For double slider specifications, part number and dimensions, contact NSK. 3). For strokes not listed, contact NSK. 4). Dimensions above show optional pin holes. For complete catalog information on NSK Toughcarrier (TCH Series), please reference e3421 Toughcarrier TM. 6 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

ToughCarrier TM TCH Accuracy Grades (Unit: mm) Grade High grade Stroke Repeatability Running Parallelism (vertical) Backlash ~200 14 ~400 16 ~600 20 + ~700 23 ~1,000 20 or less ~1,200 30 Grade Precision grade Stroke Repeatability Running Parallelism (vertical) Positioning Accuracy Backlash ~200 8 20 ~400 2 ~600 12 +3 30 ~700 1 ~1,000 3 3 or less ~1,200 20 40 Specifications Standard Slider Specifications Reference Model Ball Screw Lead Shaft Dia Basic Dynamic Load Rating (N) Basic Static Load Rating (N) Suporting Unit Limiting Basic Static Moment Load (N) Ball Screw Ca Linear Guide C Support Unit Ca Ball Screw C0a Linear Guide C0 Load (N) Rolling MR0 Pitching MP0 Yawing MY0 TCH-K,900 6,700 21,700 Ø20 62,400 9,600 20 7,060 84,600 12,700 132,000,670 3,980 2,10 2,10 Short Slider Specifications Reference Model Ball Screw Lead Shaft Dia Basic Dynamic Load Rating (N) Basic Static Load Rating (N) Suporting Unit Limiting Basic Static Moment Load (N) Ball Screw Ca Linear Guide C Support Unit Ca Ball Screw C0a Linear Guide C0 Load (N) Rolling MR0 Pitching MP0 Yawing MY0 TCH-A,900 66,0 21,700 Ø20 38,700 9,600 20 7,060 2,00 12,700 71,00,670 2,10 630 630 Basic dynamic and static load ratings indicate the values for one slider. Basic dynamic load ratings of the linear guide is based on 0 km fatigue life with unchanging load acting perpendicular to the axis of motion on top of the slider. Basic dynamic load rating of the linear guide is the load in perpendicular direction to the axis of motion that allows 90% of a group of the same ToughCarriers to operate equivalent to 1 million revolutions of the ball screw and support unit under the same condition without causing flaking by rolling contact. Basic dynamic load rating of the ball screw is a load to axial direction that allows 90% of ball screws of a group of the same Toughcarriers to rotate 1 million revolutions under the same condition without causing flaking by rolling contact. Basic static load rating is a load that results when combined permanent deformations at the contact points of balls and ball grooves is 0.01% of the diameter. In case of moment loading when using short slider, use of 2 sliders (double short slider specification) is recommended. For complete catalog information on NSK Toughcarrier (TCH Series), please reference e3421 Toughcarrier TM. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com 7

Notes 8 Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com

Worldwide Sales Offices NSK Ltd. Headquarters, Tokyo, Japan www.nsk.com Asia Business Strategic Division- Headquarters tel: 81-03-3779-714 Industrial Machinery Bearings Division- Headquarters tel: 81-03-3779-7227 Automotive Division-Headquarters tel: 81-03-3779-7189 Needle Roller Bearings Strategic tel: 81-03-3779-263 Division-Headquarters Precision Machinery & Parts tel: 81-03-3779-7219 Division-Headquarters Africa South Africa: NSK South Africa (Pty) Ltd. Johannesburg tel: 27-011-48-3600 Asia and Oceania Australia: NSK Australia Pty. Ltd. www.nskaustralia.com.au Melbourne tel: 61-03-9764-8302 China: NSK Hong Kong Ltd. Hong Kong tel: 86-2739-9933 Kunshan NSK Co., Ltd. Kunshan Plant tel: 86-020-730-64 Changshu NSK Needle Bearing Co., Ltd. Jiangsu Plant tel: 86-012-230-1111 Guizhou HS NSK Bearings Co., Ltd. Anshun Plant tel: 86-083-3210 NSK Steering Systems Dongguan Co., Ltd. Dongguan Plant tel: 86-0769-262-0960 Zhangjiagang NSK Precision Machinery Co., Ltd. Jiangsu Plant tel: 86-012-867-6496 Timken-NSK Bearings (Suzhou) Co., Ltd. Jiangsu Plant tel: 86-012-666-666 NSK China Technology Center Jiangsu tel: 86-012-771-64 NSK (Shanghai) Trading Co., Ltd. Shanghai tel: 86-021-623-0198 Beijing tel: 86-0-690-8161 Guangzhou tel: 86-020-3786-4833 Anshun tel: 86-083-32222 Chengdu tel: 86-028-8661-4200 Shenzhen tel: 86-07-2904886 Changchun tel: 86-0431-8988682 NSK (China) Investment Co., Ltd. Shanghai tel: 86-021-623-0198 India: Rane NSK Steering Systems Ltd. Chennai tel: 91-044-274-66002 NSK Ltd. India Branch Office Chennai tel: 91-044-2446-6862 Indonesia: PT. NSK Bearings Manufacturing Indonesia Jakarta tel: 62-021-898-01 PT. NSK Indonesia Jakarta tel: 62-021-22-348 Korea: NSK Korea Co., Ltd. www.kr.nsk.com Seoul tel: 82-02-3287-0300 Changwon Plant tel: 82-0-287-6001 Malaysia: NSK Bearings (Malaysia) Sdn. Bhd. Kuala Lumpur tel: 60-03-7722-3372 NSK Micro Precision (M) Sdn. Bhd. Malaysia Plant tel: 60-03-961-6288 New Zealand: NSK New Zealand Ltd. www.nsk-rhp.co.nz Auckland tel: 64-09-276-4992 Philippines: NSK Representative Office Makati City tel: 63-02-893-943 Singapore: NSK International (Singapore) Pte Ltd. Singapore tel: 6-6496-8000 NSK Singapore (Pte) Ltd. www.nsk-singapore.com.sg Singapore tel: 6-6496-8000 Taiwan: Taiwan NSK Precision Co., Ltd. Taipei tel: 886-02-209-330 Thailand: NSK Bearings (Thailand) Co., Ltd. Bangkok tel: 66-02-6412-10 SIAM NSK Steering Systems Co., Ltd. Chachoengsao tel: 66-038-22-343~30 NSK Asia Pacific Technology Center (Thailand) Co., Ltd. Chonburi tel: 66-038-44631~44633 Vietnam: NSK Representative Office Hanoi tel: 84-04-93-1269 Europe NSK Europe Ltd. (European Headquarters) www.eu.nsk.com Maidenhead, U.K. tel: 44-01628-09800 France: NSK France S.A.S Paris tel: 33-01-30-7-39-39 Germany: NSK Deutschland GmbH Düsseldorf tel: 49-022-481-0 NSK Steering Systems Europe Ltd. Stuttgart tel: 49-0771-79082-277 Neuweg Fertigung GmbH Munderkingen tel: 49-07393-40 Italy: NSK Italia S.p.A. Milano tel: 39-02-99-19-1 Industria Cuscinetti S.p.A. Torino Plant tel: 39-0119824811 Netherlands: NSK European Distribution Centre B.V. Tilburg tel: 31-013-4647647 Poland: NSK Polska Sp. z.o.o. Warsaw Branch tel: 48-022-64-12 NSK Iskra S.A. Kielce tel: 48-041-366-6111 NSK European Technology Center, Poland Office Kielce tel: 48-041-366-812 Spain: NSK Spain S.A. Barcelona tel: 34-093-289-27-63 Turkey: NSK Rulmanlari Orta Dogu Tic. Ltd Sti tel: 90-0216-442-76 United Kingdom: NSK Bearings Europe Ltd. Peterlee Plant tel: 44-0191-86-6111 NSK European Technology Centre Newark tel: 44-01636-60123 NSK UK Ltd. Newark tel: 44-01636-60123 NSK Steering Systems Europe Ltd. Coventry tel: 44-024-76-3370 North and South America NSK Americas, Inc. (American Headquarters) Ann Arbor tel: 1-734-913-700 Argentina: NSK Argentina SRL Buenos Aires tel: 4-011-4762-66 Brazil: NSK Brasil Ltda. www.br.nsk.com São Paulo tel: -011-3269-4700 Canada: NSK Canada Inc. www.ca.nsk.com Toronto tel: 1-90-890-0740 Mexico: NSK Rodamientos Mexicana, S.A. de C.V. www.mx.nsk.com Mexico City tel: 2--36822900 United States of America: NSK Corporation www.nskamericas.com Ann Arbor tel: 1-734-913-700 NSK American Technology Center Ann Arbor tel: 1-734-913-700 NSK Precision America, Inc. www.nskamericas.com Franklin tel: 800-2-4773 NSK Steering Systems America, Inc. www.nssa.nsk.com Bennington, Vermont tel: 1-802-442-448 NSK Latin America, Inc. www.la.nsk.com Miami tel: 1-30-477-060 NSK Ltd. has a basic policy not to export any products or techology designated as controlled items by export-related laws. When exporting the products in this brochure, the laws of the exporting country must be observed. Specifications are subject to change without notice and without any obligation on the part of the manufacturer. Every care has been taken to ensure the accuracy of the data contained in this brochure, but no liability can be accepted for any loss or damage suffered through errors or omissions. We will gratefully acknowledge any additions or corrections. Linear Actuators - Rev 3/AC/1M1. Printed in the USA NSK 201. The contents of this publication are the copyright of the publishers. Courtesy of Steven Engineering, Inc. - (800) 28-9200 - sales@steveneng.com - www.stevenengineering.com