MTD Central Distributor 2011 Product Line-up
Troy-Bilt Walk-Behind Mowers The Walk-Behind Mower Re-Design is now fully implemented Major Improvements are: TriAction Cutting Deck Design Front and Rear Axles Dual Lever Height Adjust Adjustable Handle Heights True Variable Speed Option Deck Wash Out Option Improved Grass Collection System
Troy-Bilt - NEW Walk-Behind Mowers NEW Deck Deck is stamped in a symmetrical circle with a completely curved surface (no flat areas) to create a strong vacuum for grass to circulate freely. Free flowing grass resists clogging, mulches better, and discharges easier. NEW Blade Blade has flatter surfaces to create less turbulence and more even air flow Blade has smooth arc instead of upward angles to lift grass easier Deck extends beyond the wheels on both sides of deck. Short wheel base allows the user to maneuver the mower easier and to lift the front up easier when turning The edges of the deck are folded under the deck to create strength and keep grass in the deck for maximum mulching. The under flange also creates a smooth surface so the user doesn t scratch trees or fences (tree guards) Deck is angled up from the front to the back, so grass is thrown upward as it enters the deck for greater mulching Blade has cutting ability on both the front and back side to mulch grass finer
Troy-Bilt - NEW Walk-Behind Mowers NEW Axles The pass-through axles are independent of the deck, which keeps the wheels straight (no tow). The front axle connects the front wheels together and the rear axle connects the rear wheels together. NEW Bumper The push bumpers have a pass-through gap that allows grass to remain standing upright as it enters the deck for a more even cut. It also makes the mower easier to push (less resistance). The Troy-Bilt bumpers also have a rake to funnel and stand the grass. Straight wheels allow the mower to roll smoothly and more quietly. Wheels last longer when they are aligned and roll evenly. Two pass-through axles only require two height adjustments on the same side of the deck (dual-lever height adjustment). Blade is lower than baffle and cut-out, so grass is cut upright as it passes through the front of the mower 6-position height adjustments with 1.25-3.75 cutting heights.
Troy-Bilt - NEW Walk-Behind Mowers NEW Handles Handle has an indent to provide a space for the bail to fit seamlessly. Adjustable handles have three positions that allow the handle to move up or down by 6-8 inches. NEW Transmission Single-speed transmission is operated by a tippulley, dog clutch, and clutching belt. The pulleys and belt slips evenly as the clutch engages, so the mower does not jump. The mower accelerates from 0-3mph without allowing the user to vary the speed. The handle attaches directly to the deck to give it rigidity and a solid feel. A crossbar is not required, which allows the user easier access to the bagger. The Variable-speed transmission operates in the same manner as the single-speed transmission, but the user has full control of the tip of the pulley with a squeeze grip. The squeeze grip system is sensitive and allows the user to have True Variable Speed from 0-3.5mph.
Troy-Bilt - NEW Walk-Behind Mowers NEW Bag Rectangle-shaped bag with double wall material on the discharge side of the bag, rear, and top for dust-blocking. Symmetrical bagger with opening as big as the bag causes grass to flow and empty evenly. Opening is 25% bigger. Bagger attaches with an intuitive latch design on the outside of the rear door. Rear door securely closes onto bagger to provide a tight seal. NEW Extras Ergonomic wing nuts on the handles and knobs on the height adjusters Deck wash on self-propelled models Premium S-Wave Tread and Golf wheels The absence of the crossbar on the handle makes emptying easy. Size of bag is designed to be pulled through handles when full. Bag is sized appropriately, so it will not be too heavy when filled with wet grass. It can be set on the ground or pulled through the handle. Bagger is designed with a mid-length handle and strap on the bag for easy emptying with two hands.
Troy-Bilt Walk-Behind Mowers TB110 - Tri Action 21 Walk-Behind Push Mower 11A-A26M066 190cc Briggs & Stratton 675 Series engine with Readystart Guarantee Dual-Lever Height Adjusters TB130 - Tri Action 21" High Wheel Walk-Behind Push Mower 11A-B29Q766 160cc Honda Engine with Automatic Return Choke System Dual-Lever Height Adjusters
Troy-Bilt Self-Propelled Mowers TB210 - Tri Action 21" Front Wheel Drive Self-Propelled Mower 12A-A26M066 190cc Briggs & Stratton 675 Series engine with Readystart Single Speed Front Wheel Drive System Dual-Level Height adjusters TB230 - Tri Action 21" High Wheel FWD Self-Propelled Mower 12AVB26M066 190cc Briggs & Stratton 675 Series engine with Readystart Squeeze grip variable speed control 11" Rear high wheels for added maneuverability
Troy-Bilt Self-Propelled Mowers TB260 - Tri Action 21" Front Wheel Drive Self-Propelled Mower 12AVB29Q766 160cc Honda Engine with Automatic Return Choke System Single Speed Front Wheel Drive System TB280 ES - Tri Action 21" Electric Start Self-Propelled Mower 12AGA26E066 190cc Briggs & Stratton 675 Series engine with Readystart Single Speed Front Wheel Drive System Keyed Electric Start System
Troy-Bilt Premium XP Series SP Mowers TB330 XP - 21 Variable Speed Self-Propelled Mower 12AKC39B066 175cc OHV 775 Series B&S Engine 4-speed continuous variable transmission Rear Wheel Drive 21" steel mulching deck 3-in-1 capability - side discharge, mulch or rear bag 6-position single-lever deck height adjustment Fully assembled with oil included in carton 3 Year Limited Warranty TB350 XP - 21" Rear Wheel Drive Self-Propelled Mower 12AKD39B066 175cc OHV 775 Series B&S Engine 4-speed continuous variable transmission Rear Wheel Drive 21" steel mulching deck 3-in-1 capability - side discharge, mulch or rear bag 8" front, 12" rear wheels 6-position single-lever deck height adjustment Fully assembled with oil included in carton 3 Year Limited Warranty
NEW - Troy-Bilt Electric & Reel Mowers TBE 15 19 Electric 110 volt, Single-lever Height Adj. 18A-212A766 TBE 25 19 Cordless Battery Mower, Single-lever Height Adj. 18A-212B766 TBR 16 16 Reel Mower with 10 Wheels 15A-3000766 TBR 18 18 Reel mower with 10 Wheels 15A-3100766
Troy-Bilt Lawn Tractors Tuffy 38 Lawn Tractor 17 HP Kohler Courage Engine 13AV77KF066 7-speed Shift-on-the-Go transmission for effortless speed changes 38 Twin Blade Cutting Deck fits through most gate openings 18 Turning Radius Step-Thru Frame for easy on and off Pony 42 Lawn Tractor 17.5 HP Briggs & Stratton Engine 13WN77KS011 7-speed Shift-on-the-Go transmission for effortless speed changes 42" twin-blade side discharge mowing deck 18 Turning Radius Step-Thru Frame for easy on and off
Troy-Bilt Lawn Tractors Bronco 42 Lawn Tractor 20 HP Kohler Courage Engine 13WX78KS066 Automatic transmission with foot pedal controls - drives like a car! 42" staggered side discharge mowing deck Comfortable medium-back seat Step-Thru Frame for easy on and off Stallion 46 Lawn Tractor 22 HP Kohler Courage Engine 13WX91KT066 Foot Pedal Hydro Transmission 46" staggered side discharge deck Comfortable high-back seat Step-Thru Frame for easy on and off ALSO, Horse 46 Lawn Tractor 22 HP Kohler Courage Engine 13WX79KT011 PLUS, Workhorse 50 Super Lawn Tractor 24 HP Kohler Courage Twin 13WQ92KP066 Foot Hydro transmission - drives like a car! 50 side discharge mowing deck Comfortable High-back seat
Troy-Bilt RZTs Colt ZT42 42 residential zero turn 22 HP Kohler Courage Twin 17WF2ACS011 42" staggered side discharge mowing deck Comfortable High-back seat 50 Mustang ZT50 50 residential zero turn 25 HP Kohler Courage Twin 17WF2ACP011 50" heavy duty deck Comfortable High-back seat Large tires
Troy-Bilt Garden Tillers Bronco CRT Garden Tiller 208cc Troy-Bilt engine Counter-rotating tines for easy use and greater control Cast-iron transmission with bronze gear drive 1 forward speed 14" tilling width 10" tine diameter Adjustable tilling depth up to 6" 10" AG tires for greater maneuverability Limited lifetime warranty on transmission Super Bronco CRT Garden Tiller 208cc Troy-Bilt engine Counter-rotating tines for easy use and greater control Cast-iron transmission with bronze gear drive 1 forward speed with power reverse 16" tilling width 10" tine diameter Adjustable tilling depth up to 6" 12" AG tires for greater maneuverability Limited lifetime warranty on transmission NEW Stronger handles
Troy-Bilt Power Wheelbarrow Troy-Bilt Pack Horse The Troy-Bilt Pack Horse can haul up to 500 pounds of materials in its 6 cubic foot bed. The rear center of gravity of the bed allows you to work safely on slopes up to 10 degrees without tipping. An extended ergo handle assists with lifting the bed. A 34" width allows for movement through stall doors or gates. Key Features: Hydrostatic transmission Infinitely variable Speed in both Forward and Reverse 34" width 6.5 HP Briggs & Stratton 650 Series Engine 500 lb. capacity 6 cubic foot dump bed
Troy-Bilt Handheld Garden Cultivators TB146 4-Cycle Garden Cultivator / Edger 26cc, 4-cycle engine - no mixing of oil and gas! SpringAssist starting system Edger attachment kit included - converts in minutes without tools Durable gear-driven transmission 8" patented steel cultivating tines dig, weed and shred for soil preparation Adjustable tilling width from 6" to 10 1/4 Adjustable tilling depth up to 8 NOW with 6 tines TB154 Electric Cultivator Easy electric start - no pulling the cord! 120 volt / 6.5 amp electric motor Durable gear-driven transmission Forward-rotating tines - ideal for cultivating and weeding in gardens 8" patented steel cultivating tines dig, weed and shred for soil preparation Adjustable tilling width from 6" to 10 1/4 Adjustable tilling depth up to 8" Standard cord minder keeps your extension cord in check
Troy-Bilt Handheld Lawn Edger s TB515 EC Portable Gas Lawn Edger 29cc, 4-cycle engine requires no mixing of oil & gas! New! Electric Start Capable Heavy-duty 9" dual-tip steel blade Edging depth up to 2" 7" tri-wheel design for greater maneuverability Fully molded ergonomic handle design with handle-mounted controls TB554 Triple Blade 158cc Gas Lawn Edger 158cc Briggs & Stratton 500 Series engine Self-sharpening, heavy duty 9" triple-edge blade 6-position edging depth up to 2 1/4" 3-position adjustable bevel Curb wheel included Premium 7" front and 8" rear steel ball-bearing wheels
New P25-25cc Engine New piston ported engine replaces reed valve platform that is almost 30 years old. More compact and over one pound of weight removed. Starter Clutch design on OPP models to help reduce pulling resistance. Electric start capability can be added for extra cost.
New P25-25cc Engine ( & 27cc) Improved flywheel design for better engine cooling Piston ported engine design moves muffler to side of engine (from rear) allows access for electric start feature upgrade if requested by customer Added low speed clutch for easier starting - cutting head disengaged for starting only Starter housing improvements - added clearance from moving parts - improved pulley retention method
½ Crank vs Full Crank --- the Differences ½ Crank Engines Least expensive design Stamped Steel Components Single Bearing support P27 Full Crank Engine Better Balance & Smoother operation Rear Starter 5 piece Stamped Steel Electric Start Optional Two Bearing support PRO Full Crank Engine Better Balance & Smoother operation Rear Starter for easier service 3 piece Forged Steel for longer life Electric Start optional Two Bearing Support
TB22 EC Gas Trimmers with Press2Start TB80 EC TB525 EC TB575 EC TB539 ES Press-2-Start Optional
Troy-Bilt Handheld - NEW Trimmer TB22 EC - Curved Shaft Gas String Trimmer 25cc, 2-cycle engine with performance-tuned ignition for more reliable starting SpringAssist starting starts with a slow & steady pull, dramatically reducing pulling effort EZ-Link coupler accepts interchangeable attachments for the ultimate in versatility Bump Head line release quickly and easily advances trimmer line 17" cutting swath -.095" diameter dual line Adjustable D-handle for easy right- or left-handed use Oil included in carton
Troy-Bilt Handheld - NEW Trimmer TB80 EC - Straight Shaft Gas String Trimmer 27cc, 2-cycle engine with performance-tuned ignition Pro-style Straight Shaft for easy reach under shrubs and low bushes SpringAssist starting starts with a slow & steady pull, dramatically reducing pulling effort EZ-Link coupler accepts interchangeable attachments for the ultimate in versatility Bump Head line release quickly and easily advances trimmer line 17" cutting swath ---.095" diameter dual line Adjustable Deluxe D-handle for easy right- or left-handed use Oil included in carton P27 Full Crank Engine Better Balance & Smoother operation Rear Starter 5 piece Stamped Steel Electric Start Optional Two Bearing support
Troy-Bilt Handheld - Trimmers TB90BC Gas String Trimmer / Brushcutter 31cc, 2-cycle engine with performance-tuned ignition for more reliable starting Pro-style Straight Shaft for easy reach under shrubs and low bushes SpringAssist starting starts with a slow & steady pull, dramatically reducing pulling effort EZ-Link coupler accepts interchangeable attachments for the ultimate in versatility Bump Head line release quickly and easily advances trimmer line 18" cutting swath ---.105" diameter dual line 8" 4-tooth steel brush blade for heavy vegetation Adjustable padded J-handle provides added control and easy right- or left-handed use Shoulder Strap and Oil included in carton California Compliant
Troy-Bilt Handheld Trimmer with E-Start TB525EC 4-Cycle Gas String Trimmer / Edger 29cc 4-Cycle Engine is cleaner and produces less noise Uses less fuel and does not require gas and oil mixing! Press2Start Electric Starter Capable Start the trimmer with a push of a button! (sold separately) EZ-Link Attachment System accepts interchangeable attachments Innovative SpeedSpool 2 Bump Head allows you to reload without dismantling the spool! Multi-position Deluxe D-Handle reduces vibration and operator fatigue Spring Assist Starting Technology provides an easy start with just a smooth and steady pull! California Compliant
Troy-Bilt Handheld 4-Cycle Trimmers (Includes Electric Start Accessory) TB535ES 4-Cycle Curved Shaft Gas String Trimmer/Edger TB575 EC Straight Shaft Gas String Trimmer/Edger TB590 EC String Trimmer/ Brushcutter
NEW - Commercial Grade - Pro Trimmer TB6040 XP $259. Retail 3 Year Warranty 41DD604C966 25cc, 4 Cycle Forged Full Crank P2S Capable, Spring Assist Straight Shaft Split-boom Dual Line Speed Spool Pro Bump PRO Full Crank Engine Better Balance & Smoother operation Rear Starter for easier service 3 piece Forged Steel Crank - for longer life Electric Start optional Two Bearing Support 18".095 Line Contour Handle Deluxe Shoulder Strap
Troy-Bilt Handheld Blowers & Blower/Vacs TB320BV 31cc Gas Leaf Blower / Vac TB2SC 25CC 2-Cycle Suitcase Gas Leaf Blower TB2BP 27CC 2-Cycle Full-Crank Backpack Blower TB4SC 25CC OHV 4-Cycle Suitcase Gas Leaf Blower TB4BP 32CC 4-Cycle Full-Crank Backpack Blower
Troy-Bilt Snow Throwers Squall 2100 Single-Stage Snow Thrower 208cc Troy-Bilt 4-cycle OHV engine no mixing of oil and gas! Standard push-button electric start 21" clearing width 10" intake height Auger-assist drive Comfort grip ergonomic and foldable handle Polymer chute with 180 degree rotation Mitten-grip recoil starter Storm 2410 -- 24" Two-Stage Snow Thrower 179cc 4-cycle OHV Troy-Bilt engine Push-button electric start All-wheel drive 6 forward / 2 reverse speeds 24" clearing width - 21" intake height - 12" serrated steel auger Adjustable skid shoes - easily adjusts ground clearance 13" x 4" X-Trac tires
Troy-Bilt Chipper / Shredders CSV 060 Push Chipper Shredder Vac 190cc Briggs & Stratton engine 3-in-1 chipper shredder vacuum - 24" vacuum width 7' on-board vacuum hose plus 3' hose attachment 1.5" chipping capacity - 8:1 debris reduction ratio 2-bushel, felt-lined collection bag Heavy duty, cast-aluminum and hardened-steel impeller CSV 070 Self-Propelled Model also Available CS 4265 2-in-1 Heavy Duty Wood Chipper and Shredder 205cc Briggs & Stratton OHV engine 2-in-1 steel upright chipper shredder 2-way feed: drop-in hopper plus dedicated chipper chute 2" chipping capacity -10:1 debris reduction ratio 2 chromium steel chipper knives 12 replaceable cast steel flails 5-bushel collection bag capacity Tow bar included
Troy-Bilt Log Splitters 27 & 33 Ton LS 27 TB - 27 Ton Hydraulic Log Splitter / Wood Splitter Heavy-duty construction Cast-iron splitting wedges Tons of RAM force Towable 27 Ton RAM force 160cc Honda OHV/OHC engine Cast iron, replaceable & sharpen-able splitting wedge 25" maximum log capacity Automatic cylinder return with 19-second cycle time Coil-wrapped hoses Heavy duty, 2-stage pump 3 gallon hydraulic reservoir -- hydraulic fluid included Easily changes from vertical to horizontal operation Hitch and jack stand included Pre-assembled