Ascotherm eco KRP91 Natural convection

KRP91 Natural convection Tender specification, range available and sizes Tender specification Version KRP91 Natural Convection Ready-to-install floor pan for the floor area. Operating principle natural convection. Operating principle Cold air from the window area and cool room air drop in the floor pan. The air is heated by the heat register, becomes lighter and rises. Due to the installation in front of window areas a specific shielding against cold air is provided. For more information, see chapter "General information". Sturdy floor pan made of galvanised sheet steel, coated in anthracite grey (RAL 7016), external, adjustable and acoustically decoupled height adjustments (pre-installed). Heat register consisting of copper pipes and aluminium fins, anthracite grey (RAL7016) coated and mounted in transversal steel girders made of galvanised sheet steel, acoustically decoupled. Standard on the face or room side euro taper connection with union nut ( 3 / 4 internal thread) and air vent. Suitable for a max. operating pressure of 10 bar (optionally 16 bar) and a max. operating temperature of 110 C. Aluminium linear as standard. Acoustic decoupling through placement of the aluminium linear on rubber elements in the floor pan. Consisting of sturdy longitudinal profile bars, natural colour anodised, with profile bar dimensions of 16 x 6 mm. Grille with a total height of 20 mm and an open crosssection of 60%. Including installation cover and edge bar protection for protecting the trench convectors during the construction phase. Heat outputs tested and determined in acc. with Pr DIN EN 164, Part 1 and 2. QA system certified according to DIN EN ISO 9001:2008. Environmental management system according to DIN EN ISO 14001:2004. Suitable for closed water heating systems in accordance with DIN 18380 and water quality in accordance with VDI 2035, ÖNORM H5195 and SWKI BT 102-01. Operating conditions: Hot water up to 110 C Operating pressure: Test pressure: Max. 10 bar (optionally 16 bar high-pres- sure-version) 13 bar (21 bar) Ascotherm eco KRP91 General Trench convectors find application in private residential areas, in conservatories, in offices and administration buildings, in showrooms as well as in business premises. Version KRP91 Natural Convection Connections: 2 x euro taper with union nut ( 3 / 4 internal thread), suitable for use with all fittings that comply with DIN V 3838 Air vent: installed Range available 6 depths: 185, 210, 260, 310, 360 and 400 mm 4 heights: 92, 120, 1 und 200 mm 17 lengths: from 1000 mm to 00 mm Grading 2 mm Standard: Aluminium linear Surface finishes Standard colour of floor pan, powder-coated: Anthracite grey (RAL7016 matt finish) Standard colour of linear : Aluminium anodised in natural colour Standard colour of edge bar: Aluminium, anodised in natural colour Accessories Digital room thermostat Programmable room thermostat Electric actuator 2 V AC Room thermostat with remote control Connection set, consisting of valve base with factory preset k V valve and return fitting with shut-off For additional accessories and information about accessories, see "Accessories". s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 5

Ascotherm KRP91 Natural convection Technical data per metre Technical data per metre Height 92-200 mm Ascotherm eco KRP91 Height H 92 120 1 200 Depth T Φ L T K 75/65/20 C [watts/m ribbed convector length] Φ T K 70/55/20 C [watts/m ribbed convector length] Heat output Φ T K 55/45/20 C [watts/m ribbed convector length] Φ T 25K /40/20 C [watts/m ribbed convector length] Exponent n [ ] Spec. standard water flow rate q ms [kg/h m] Mass per metre (average) M [kg/m] 185 288 220 126 93 1,60 24,8 9,01 210 315 248 151 116 1, 27,2 9,98 260 368 289 176 135 1,43 31,7 11,78 310 473 377 238 186 1,33 40,8 13,72 360 567 451 282 219 1,35 48,9 15,89 400 6 3 317 247 1,33 54,3 17,01 185 354 273 161 121 1,53,5 10,02 210 389 6 187 143 1, 33,5 11,06 260 473 371 226 173 1,43 40,8 12,98 310 567 444 269 206 1,44 48,9 15,06 360 662 519 316 2 1,43 57,1 17,33 400 735 578 353 271 1, 63,4 18,53 185 0 323 189 141 1,55 36,2 11, 210 554 434 263 201 1,44 47,8 12,87 260 662 516 310 235 1,47 57,1 14,80 310 767 600 363 277 1,45 66,1 17,22 360 859 669 402 5 1,47 74,1 19,95 400 945 733 435 329 1, 81,5 21,06 185 9 393 232 175 1,52 43,9 13,00 210 610 477 288 220 1,45 52,6 14,41 260 725 566 341 260 1,46 62,5 16,41 310 872 681 410 312 1,46 75,2 18,89 360 1128 880 5 404 1,46 97,2 21,69 400 17 1017 608 462 1,48 112,7 22,85 For individual calculations of heat outputs, see "General Information" 6 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

KRP91 Natural convection Dimensional drawings and connection images 2-pipe connections without integrated valve Connection system Ordering code IVTI Arrangement ANB Connection size Ordering code VG RG Additional price per radiator 2-pipe, room side, side by side 2-pipe, on the face side, side by side 2 BB DD 2 11 33 Euro taper with union nut internal thread 3 / 4 64 64 Ascotherm eco KRP91 Special connection 66/ 88 2-pipe, facing down, side by side 2 The accessories range does not contain any connection sets with preset valves for the connection arrangements 66 and 88; however, these can be installed at the factory with appropriate notification when ordering. Valve base with factory preset k v valve = Outflow 3 / 4 external thread with euro taper, inflow 1 / 2 internal thread; return fitting with shut-off: both sides 3 / 4 external thread with euro taper On request Dimensional drawings KRP91 Connection BB/DD Side view from left Front view Side view from right T H1 H T-33 H3 H2 36 106 L Ø19 Ø33 Top view Lber. ribb. Dimensional drawings for connection BB, connection DD mirrored T 185 210 260 310 360 400 H H1 H2 H3 92 3-61 61 120 3-61 86 1 3-85 61 111 200 3-105 86 136 s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 7 L L ribb. up to 00 L - 278 over 00 L - 360

KRP91 Natural convection Dimensional drawings and connection images Dimensional drawings KRP91 Connections 11/33 Side view from left Front view Side view from right T Ascotherm eco KRP91 H1 T-33 Ø33 L H T2 Top view L ribb. ber. H2 H3 T1 NA Ø19 Dimensional drawings for connection 11, connection 33 mirrored T 185 210 260 310 360 400 H H1 H2 H3 92 3-61 61 120 3-61 86 1 3-85 61 86 200 3-105 86 111 T T1 T2 Boss spacing 185 38 92 100 210 38 117 100 260 38 1 112,5 310 88 192 112,5 360 126 237 100 400 151 269 100 L L ribb. up to 00 L - 278 over 00 L - 360 Pressure loss diagram for heights 92 and 120 mm Pressure loss diagram for heights 1 and 200 mm T 185, T 210 Pressure loss p [mbar/m ribbed convector length] 100 10 T 185, T 210 T 260 T 310 T 400 T 360 Pressure loss p [mbar/m ribbed convector length] 100 10 T 260 T 310 T 400 T 360 1 10 100 1000 Water flow q m [kg/h] 1 10 100 1000 Water flow q m [kg/h] 8 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

KRP91 Natural convection s and heat outputs Height 92 mm (depth 185 260 mm) Version KRP91 KRP91 KRP91 Depth T 185 210 260 Exponent n [ ] 1,60 1, 1,43 per piece [EUR/pc.] 87,14 119,18 124,15 per metre [EUR/m] Length L Ribbed convector length Lribb. 1000 722 12 972 10 1222 17 1472 2000 1722 22 1972 20 2222 27 2472 00 2722 32 2890 3140 37 3390 4000 3640 3890 40 4140 47 4390 00 4640 T [K] without linear Φ [watts] 208 159 91 280 213 122 352 268 154 4 323 185 496 378 217 568 433 248 640 488 280 712 543 311 784 598 343 832 634 364 904 689 395 976 744 7 1048 799 458 1120 854 490 1192 909 521 1264 963 553 1336 1018 584 113,12 LR: Aluminium linear, natural colour anodised (standard) with linear 204,04 200,26 291,18 228,54 3,19 256,82 393,20 285,10 444,21 313,38 495,22 341,66 546,23 369,94 597,24 398,22 648,25 6, 699,26 454,78 7,27 483,06 801,28 511,34 852,29 539,62 903, 567,90 954,31 596,18 1005,32 624,46 1056,33 652,74 1107,34 without linear Φ [watts] 227 178 109 6 240 147 385 3 185 464 365 223 5 6 260 621 488 298 700 5 336 779 612 374 857 673 411 910 715 437 989 777 475 1068 839 513 1147 901 551 1225 963 588 14 1025 626 1383 1087 664 1462 1149 702 160,60 with linear 256,25 279,78 375,43 319,93 439,49 360,08 3,56 400,23 567,62 440,38 631,68 480,53 695,74 520,68 759,81 560,83 823,87 600,98 887,93 641,13 951,99 681,28 1016,06 721,43 1080,12 761,58 1144,18 801,73 1208,24 841,88 1272,31 882,03 1336,37 922,18 1400,43 Ribbed convector length = length floor pan - 278 mm, for length > 00 mm: length floor pan - 360 mm without linear Φ [watts] 266 209 127 358 281 171 4 353 215 5 5 259 634 497 3 726 570 347 818 6 391 910 714 435 1002 786 479 1064 835 8 1156 907 552 1248 979 596 1340 1051 640 1432 1123 684 1524 1196 728 1616 1268 772 1708 1340 816 161,09 with linear 269,72 285,24 393,87 325,51 461, 365,79 528,73 406,06 596,16 446,33 663,59 486,60 731,02 526,88 798,45 567,15 865,88 607, 933,31 647,69 1000,74 687,97 1068,17 728,24 1135,60 768,51 1203,03 808,78 1270,46 849,06 1337,89 889,33 1405,32 929,60 1472,75 Ascotherm eco KRP91 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 9

KRP91 Natural convection s and heat outputs Height 92 mm (depth 310 400 mm) Ascotherm eco KRP91 Version KRP91 KRP91 KRP91 Depth T 310 360 400 Exponent n [ ] 1,33 1,35 1,33 per piece [EUR/pc.] 141,38 157,62 164,92 per metre [EUR/m] Length L Ribbed convector length Lribb. 1000 722 12 972 10 1222 17 1472 2000 1722 22 1972 20 2222 27 2472 00 2722 32 2890 3140 37 3390 4000 3640 3890 40 4140 47 4390 00 4640 T [K] without linear Φ [watts] 3 273 172 460 367 231 578 461 291 696 555 3 815 6 410 933 744 469 1051 839 529 1169 933 588 1288 1028 648 1367 1091 687 1485 1185 747 1603 1279 806 1722 1374 866 1840 1468 925 1958 1562 985 2076 1657 1044 2195 1752 1104 167,49 LR: Aluminium linear, natural colour anodised (standard) with linear 299,74 8,87 441,12 3,74 516,06 392,62 590,99 434,49 665,93 476,36 740,86 518,23 815,80 560,11 890,73 601,98 965,67 643,85 1040,60 685,72 1115,54 727,60 1190,47 769,47 1265,41 811,34 1340,34 853,21 1415,28 895,09 1490,21 936,96 1565,15 978,83 1640,08 without linear Φ [watts] 409 325 204 551 438 274 693 551 345 835 664 416 976 776 486 1118 889 556 1260 1002 627 1402 1115 698 1543 1227 768 1639 13 816 1780 1416 886 1922 1528 957 2064 1641 1027 2206 1754 1098 2347 1866 1168 2489 1979 1239 2631 2092 19 215,53 with linear 361,95 373,15 519,57 7,03 610,06 480,92 700,55 534,80 791,03 588,68 881,52 6,56 972,01 696,45 1062, 7,33 1152,98 804,21 1243,47 858,09 1333,96 911,98 14,45 965,86 1514,93 1019,74 1605, 1073,62 1695,91 1127,51 1786,40 1181,39 1876,88 1235,27 1967,37 Ribbed convector length = length floor pan - 278 mm, for length > 00 mm: length floor pan - 360 mm without linear Φ [watts] 455 363 229 612 488 8 770 614 387 927 740 466 1085 866 546 12 991 625 1400 1117 704 1557 12 783 1715 1369 862 1821 1453 916 1978 1578 995 2136 1704 1074 2293 18 1153 2451 1956 1233 2608 2081 1312 2766 2207 1391 2923 2332 1470 213,51 with linear 370,85 378,43 535,77 431,81 628,48 485,19 721,20 538,56 813,91 591,94 906,62 645,32 999,33 698,70 1092,05 752,07 1184,76 805,45 1277,47 858,83 1370,18 912,21 1462,90 965,58 1555,61 1018,96 1648,32 1072,34 1741,03 1125,72 1833,75 1179,09 1926,46 1232,47 2019,17 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S 10 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

KRP91 Natural convection s and heat outputs Height 120 mm (depth 185 260 mm) Version KRP91 KRP91 KRP91 Depth T 185 210 260 Exponent n [ ] 1,53 1, 1,43 per piece [EUR/pc.] 110,52 144,49 156,95 per metre [EUR/m] Length L Ribbed convector length Lribb. 1000 722 12 972 10 1222 17 1472 2000 1722 22 1972 20 2222 27 2472 00 2722 32 2890 3140 37 3390 4000 3640 3890 40 4140 47 4390 00 4640 T [K] without linear Φ [watts] 256 197 116 344 265 156 433 334 196 521 402 236 610 471 277 698 538 317 787 607 357 875 675 397 964 744 437 1023 789 464 1112 858 4 1200 926 544 1289 994 585 1377 1062 624 1466 1131 665 1554 1199 705 1643 1267 745 137,56 LR: Aluminium linear, natural colour anodised (standard) with linear 228,48 248,08 339,00 282,47 396,12 316,86 453,24 351,25 510,36 385,64 567,48 0,03 624,60 454, 681,72 488,81 738,84 523,20 795,96 557,59 853,08 591,98 910,20 626,37 967,32 660,76 1024,44 695,15 1081,56 729,54 1138,68 763,93 1195,80 798,32 1252,92 without linear Φ [watts] 281 221 135 378 297 181 475 373 228 573 4 275 670 527 322 767 603 368 864 679 415 962 756 462 1059 832 8 1124 883 540 1221 960 586 1319 1037 633 1416 1113 680 1513 1189 726 1610 1265 773 1708 13 820 1805 1418 866 193,33 with linear 288,98 337,82 433,47 386,15 5,72 434,49 577,96 482,82 6,21 531,15 722,45 579,48 794,70 627,82 866,94 676,15 939,19 724,48 1011,43 772,81 1083,68 821,15 1155,92 869,48 1228,17 917,81 10,41 966,14 1372,66 1014,48 1444,90 1062,81 1517,15 1111,14 1589,39 Ribbed convector length = length floor pan - 278 mm, for length > 00 mm: length floor pan - 360 mm without linear Φ [watts] 3 268 163 460 361 220 578 453 276 696 546 332 815 639 389 933 732 446 1051 825 2 1169 917 558 1288 1010 615 1367 1072 653 1485 1165 709 1603 1258 766 1722 1351 822 1840 1444 879 1958 1536 935 2076 1629 991 2195 1722 1048 194,46 with linear 3,09 351,41 460,04 400,03 535,81 448,64 611,59 497,26 687,36 545,87 763,13 594,49 838,90 643,10 914,68 691,72 990,45 740,33 1066,22 788,95 1141,99 837,56 1217,77 886,18 1293,54 934,79 1369,31 983,41 1445,08 1032,02 1520,86 1080,64 1596,63 1129,25 1672,40 Ascotherm eco KRP91 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 11

KRP91 Natural convection s and heat outputs Height 120 mm (depth 310 400 mm) Ascotherm eco KRP91 Version KRP91 KRP91 KRP91 Depth T 310 360 400 Exponent n [ ] 1,44 1,43 1, per piece [EUR/pc.] 181,95 216,91 227,76 per metre [EUR/m] Length L Ribbed convector length Lribb. 1000 722 12 972 10 1222 17 1472 2000 1722 22 1972 20 2222 27 2472 00 2722 32 2890 3140 37 3390 4000 3640 3890 40 4140 47 4390 00 4640 T [K] without linear Φ [watts] 409 320 194 551 432 262 693 543 329 835 654 397 976 764 464 1118 876 531 1260 987 599 1402 1098 666 1543 1208 733 1639 1284 779 1780 1394 846 1922 15 913 2064 1617 981 2206 1728 1048 2347 1838 1115 2489 1949 1182 2631 2061 12 201,69 LR: Aluminium linear, natural colour anodised (standard) with linear 333,94 383,64 515,89 434,06 599,38 484,49 682,86 534,91 766,35 585,33 849,83 635,75 933,32 686,18 1016,80 736,60 1100,29 787,02 1183,77 837,44 1267,26 887,87 13,74 938,29 1434,23 988,71 1517,71 1039,13 1601,20 1089,56 1684,68 1139,98 1768,17 1190,40 1851,65 without linear Φ [watts] 478 375 228 643 4 7 809 635 386 974 764 465 1140 894 544 15 1024 623 1471 1154 702 1636 1284 781 1802 1414 861 1913 11 914 2079 1631 993 2244 1760 1072 2410 1891 1151 2575 2020 12 2741 21 19 2906 2280 1388 72 2410 1467 245,08 with linear 391, 461,99 608,41 523,26 706,29 584,53 804,16 645,80 902,04 707,07 999,91 768,34 1097,79 829,61 1195,66 890,88 1293,54 952,15 1391,41 1013, 1489,29 1074,69 1587,16 1135,96 1685,04 1197,23 1782,91 1258, 1880,79 1319,77 1978,66 1381,04 2076,54 14,31 2174,41 Ribbed convector length = length floor pan - 278 mm, for length > 00 mm: length floor pan - 360 mm without linear Φ [watts] 531 417 255 714 561 343 898 706 431 1082 8 519 1266 995 608 1449 1139 696 1633 1283 784 1817 18 872 2001 1573 961 2124 1669 1020 28 1814 1108 2492 1958 1196 2675 2102 1284 2859 2247 1372 43 2391 1461 3227 2536 1549 3410 2680 1637 253,07 with linear 410,41 480,83 638,17 544,10 740,77 607,37 843,38 670,63 945,98 733,90 1048,58 797,17 1151,18 860,44 1253,79 923,70 1356,39 986,97 1458,99 10,24 1561,59 1113,51 1664,20 1176,77 1766,80 1240,04 1869,40 13,31 1972,00 1366,58 2074,61 19,84 2177,21 1493,11 2279,81 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S 12 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

KRP91 Natural convection s and heat outputs Height 1 mm (depth 185 260 mm) Version KRP91 KRP91 KRP91 Depth T 185 210 260 Exponent n [ ] 1,55 1,44 1,47 per piece [EUR/pc.] 116,05 151,76 159,71 per metre [EUR/m] Length L Ribbed convector length Lribb. 1000 722 12 972 10 1222 17 1472 2000 1722 22 1972 20 2222 27 2472 00 2722 32 2890 3140 37 3390 4000 3640 3890 40 4140 47 4390 00 4640 T [K] without linear Φ [watts] 3 233 136 408 314 183 513 394 2 618 475 277 723 556 325 828 637 372 933 717 419 1038 798 466 1143 879 513 1214 933 545 1319 1014 592 14 1095 639 1529 1175 686 1634 1256 733 1739 1337 781 1844 1418 828 1949 1498 875 156,80 LR: Aluminium linear, natural colour anodised (standard) with linear 247,72 272,85 363,77 312,05 5,70 351,25 487,63 390,45 549,56 9,65 611,49 468,85 673, 8,05 735,35 547,25 797,28 586,45 859,21 625,65 921,14 664,85 983,07 704,05 1045,00 743,25 1106,93 782,45 1168,86 821,65 12,79 860,85 1292,72 900,05 1354,65 without linear Φ [watts] 400 313 190 538 1 256 677 5 322 815 638 387 954 747 453 1092 855 519 1231 964 585 1369 1072 6 18 1181 716 1601 1254 761 1740 1363 827 1878 1471 892 2017 1580 958 2155 1688 1024 2294 1797 1090 2432 1905 1155 2571 2014 1221 213,94 with linear 9,59 365,70 461,35 419,19 538,75 472,67 616,15 526,16 693,54 579,64 770,94 633,13 848,34 686,61 925,74 740,10 1003,13 793,58 1080,53 847,07 1157,93 900,55 1235,33 954,04 1312,72 1007,52 1390,12 1061,01 1467,52 1114,49 1544,92 1167,98 1622,31 1221,46 1699,71 Ribbed convector length = length floor pan - 278 mm, for length > 00 mm: length floor pan - 360 mm without linear Φ [watts] 478 372 224 643 1 1 809 6 378 974 759 456 1140 888 533 15 1017 610 1471 1146 688 1636 1275 765 1802 1404 843 1913 1491 895 2079 1620 973 2244 1749 10 2410 1878 1127 2575 2007 1205 2741 2136 1282 2906 2264 1359 72 2394 1437 210,79 with linear 319, 370, 479,13 3,20 558,99 475,90 638,84 528,59 718,70 581,29 798,55 633,99 878,41 686,69 958,26 739,38 1038,12 792,08 1117,97 844,78 1197,83 897,48 1277,68 9,17 1357,54 1002,87 1437,39 1055,57 1517,25 1108,27 1597,10 1160,96 1676,96 1213,66 1756,81 Ascotherm eco KRP91 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 13

KRP91 Natural convection s and heat outputs Height 1 mm (depth 310 400 mm) Ascotherm eco KRP91 Version KRP91 KRP91 KRP91 Depth T 310 360 400 Exponent n [ ] 1,45 1,47 1, per piece [EUR/pc.] 188,35 223,23 234,40 per metre [EUR/m] Length L Ribbed convector length Lribb. 1000 722 12 972 10 1222 17 1472 2000 1722 22 1972 20 2222 27 2472 00 2722 32 2890 3140 37 3390 4000 3640 3890 40 4140 47 4390 00 4640 T [K] without linear Φ [watts] 554 433 262 746 583 353 937 733 443 1129 883 534 1321 1033 624 1513 1183 715 1704 1332 805 1896 1482 896 2088 1633 987 2217 1733 1048 2408 1883 1138 2600 2033 1229 2792 2183 1320 2984 2333 1410 3175 2482 11 3367 2633 1591 3559 2783 1682 220,22 LR: Aluminium linear, natural colour anodised (standard) with linear 352,47 408,57 540,82 463,63 628,94 518,68 717,06 573,74 805,17 628,79 893,29 683,85 981,41 738,90 1069,53 793,96 1157,64 849,01 1245,76 904,07 1333,88 959,12 12,00 1014,18 1510,11 1069,23 1598,23 1124,29 1686,35 1179,34 1774,47 1234,40 1862,58 1289,45 19,70 without linear Φ [watts] 620 483 290 835 651 391 10 818 491 1264 985 591 1479 1152 692 1694 1320 792 1909 1488 893 2123 1654 993 2338 1822 1094 2483 1935 1161 2697 2102 1262 2912 2269 1362 3127 2437 1463 33 2604 1563 3556 2771 1663 3771 2938 1764 3986 3106 1865 265,20 with linear 411,62 488,43 634,85 554,73 737,76 621,03 840,66 687,33 943,57 753,63 1046,47 819,93 1149,38 886,23 1252,28 952,53 1355,19 1018,83 1458,09 1085,13 1561,00 1151,43 1663,90 1217,73 1766,81 1284,03 1869,71 13,33 1972,62 1416,63 2075,52 1482,93 2178,43 1549,23 2281,33 Ribbed convector length = length floor pan - 278 mm, for length > 00 mm: length floor pan - 360 mm without linear Φ [watts] 682 529 314 919 712 3 1155 895 532 1391 1078 641 1627 1261 749 1864 1445 859 2100 1628 967 2336 1811 1076 2572 1994 1185 2731 2117 1258 2967 20 1367 3204 2484 1476 3440 2667 1584 3676 28 1693 3912 33 1802 4149 3217 1911 4385 3400 2020 273,74 with linear 431,08 8,14 665,48 576,58 773,25 645,01 881,02 713,45 988,79 781,88 1096,56 8,32 1204,33 918,75 1312,10 987,19 1419,87 1055,62 1527,64 1124,06 1635,41 1192,49 1743,18 1260,93 18,95 1329,36 1958,72 1397,80 2066,49 1466,23 2174,26 1534,67 2282,03 1603,10 2389,80 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S 14 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

KRP91 Natural convection s and heat outputs Height 200 mm (depth 185 260 mm) Version KRP91 KRP91 KRP91 Depth T 185 210 260 Exponent n [ ] 1,52 1,45 1,46 per piece [EUR/pc.] 116,05 151,34 163,35 per metre [EUR/m] Length L Ribbed convector length Lribb. 1000 722 12 972 10 1222 17 1472 2000 1722 22 1972 20 2222 27 2472 00 2722 32 2890 3140 37 3390 4000 3640 3890 40 4140 47 4390 00 4640 T [K] without linear Φ [watts] 367 284 167 495 382 226 622 481 284 749 579 341 876 677 399 1004 776 458 1131 874 516 1258 972 573 1385 1070 631 1471 1137 671 1598 1235 728 1726 1334 787 1853 1432 845 1980 15 903 2107 1628 960 2235 1727 1019 2362 1825 1077 173,53 LR: Aluminium linear, natural colour anodised (standard) with linear 264,45 289,58 380, 332,96 446,61 376,35 512,73 419,73 578,84 463,11 644,95 6,49 711,06 549,88 777,18 593,26 843,29 636,64 909,40 680,02 975,51 723,41 1041,63 766,79 1107,74 810,17 1173,85 853,55 1239,96 896,94 16,08 940,32 1372,19 983,70 1438, without linear Φ [watts] 440 344 208 593 464 280 745 582 352 898 702 4 10 821 496 1203 941 569 1355 1059 640 18 1179 713 1660 1298 785 1763 1378 833 1915 1497 905 2068 1617 977 2220 1736 1049 2373 1855 1122 2525 1974 1193 2678 2094 1266 28 2213 1338 224,47 with linear 320,12 375,81 471,46 431,93 551,49 488,05 631,52 544,16 711,55 600,28 791,58 656,40 871,61 712,52 951,64 768,63 1031,67 824,75 1111,70 880,87 1191,73 936,99 1271,76 993,10 1351,79 1049,22 1431,82 1105,34 1511,85 1161,46 1591,88 1217,57 1671,91 1273,69 1751,94 Ribbed convector length = length floor pan - 278 mm, for length > 00 mm: length floor pan - 360 mm without linear Φ [watts] 523 408 246 705 5 331 886 692 417 1067 833 2 1248 974 587 14 1116 672 1611 1257 757 1792 1399 843 1973 1540 928 2095 1635 985 2277 1777 1071 2458 1919 1156 2639 2060 1241 2820 2201 1326 02 2343 1412 3183 2484 1497 3364 2626 1582 223, with linear 332,13 386,85 495,48 4,73 578,51 498,60 661,55 554,48 744,58 610,35 827,61 666,23 910,64 722,10 993,68 777,98 1076,71 833,85 1159,74 889,73 12,77 945,60 1325,81 1001,48 1408,84 1057,35 1491,87 1113,23 1574,90 1169,10 1657,94 1224,98 1740,97 1280,85 1824,00 Ascotherm eco KRP91 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 15

KRP91 Natural convection s and heat outputs Height 200 mm (depth 310 400 mm) Ascotherm eco KRP91 Version KRP91 KRP91 KRP91 Depth T 310 360 400 Exponent n [ ] 1,46 1,46 1,48 per piece [EUR/pc.] 190,57 223,23 234,40 per metre [EUR/m] Length L Ribbed convector length Lribb. 1000 722 12 972 10 1222 17 1472 2000 1722 22 1972 20 2222 27 2472 00 2722 32 2890 3140 37 3390 4000 3640 3890 40 4140 47 4390 00 4640 T [K] without linear Φ [watts] 6 492 296 848 662 399 1066 832 1 1284 1002 604 12 1172 706 1720 1343 809 1938 1513 911 2156 1683 1014 2374 1853 1116 2520 1967 1185 2738 2137 1287 2956 27 1390 3174 2477 1492 3392 2648 1595 3610 2818 1697 3828 2988 1800 4046 3158 1902 2,37 LR: Aluminium linear, natural colour anodised (standard) with linear 362,62 0,94 553,19 478,53 643,85 536,13 734, 593,72 825,16 651,31 915,81 708,90 1006,47 766, 1097,12 824,09 1187,78 881,68 1278,43 939,27 1369,09 996,87 1459,74 1054,46 15,40 1112,05 1641,05 1169,64 1731,71 1227,24 1822,36 1284,83 1913,02 13, 2003,67 without linear Φ [watts] 814 635 383 1096 855 515 1378 1076 648 1660 1296 781 19 1516 913 2224 1736 1046 26 1956 1178 2788 2176 1311 70 2396 1444 3260 2545 1533 35 2765 1665 3824 2985 1798 4106 3205 1931 4388 35 2063 4670 3645 2196 4952 3865 2328 5234 4085 2461 278,27 with linear 4,69 1, 647,92 571,07 754,09 640,64 860,27 710,20 966,44 779,77 1072,61 849,34 1178,78 918,91 1284,96 988,47 1391,13 1058,04 1497, 1127,61 1603,47 1197,18 1709,65 1266,74 1815,82 1336,31 1921,99 1405,88 2028,16 1475,45 2134,34 1545,01 2240,51 1614,58 2346,68 Ribbed convector length = length floor pan - 278 mm, for length > 00 mm: length floor pan - 360 mm without linear Φ [watts] 944 734 439 1270 988 591 1597 12 743 1924 1497 895 2251 1751 1048 2577 2005 1199 2904 2259 1351 3231 2513 14 3558 2768 1656 3777 2938 1758 4104 3193 1910 4431 3447 2062 4757 3701 2214 84 3955 2366 5411 09 2518 5738 4464 2670 6064 4717 2822 286,81 with linear 444,15 521,21 678,55 592,91 789,59 664,62 900,63 736,32 1011,66 808,02 1122,70 879,72 1233,74 951,43 1344,78 1023,13 1455,81 1094,83 1566,85 1166,53 1677,89 1238,24 1788,93 19,94 1899,96 1381,64 2011,00 1453,34 2122,04 1525,05 2233,08 1596,75 2344,11 1668,45 2455,15 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S 16 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

Product details The new connection sets with factory preset k V valves Connection sets for the Ascotherm eco It is recommended that the Ascotherm eco be fitted with preset k v connection sets (see accessories range). On request, the installation can be done at the factory. The Ascotherm eco units are fitted with preset connection sets depending on the heating or cooling capacity. Ascotherm eco units can also be fitted with the fine-adjusting valve. The adjustable valve insert permits reproducible settings of low water flow rates. The setting values can be taken from the diagram. Control curves for valve inserts Standard valve insert V5K S Presetting 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,56 8 k vs value up to 0,16 0,21 0,24 0, 0,34 0,41 0,44 0,54 0,65 0,82 0,98 1,11 1,23 1,33 1,43 Pressure loss in mbar 1000 8 9 6 7 5 4 3 100 8 9 6 7 5 4 3 10 2 2 1 2 3 4 5 6 1,5 2,5 3,5 4,5 5,5 6,5 7,5 7 8 Product details 2 3 4 5 6789 2 3 4 5 6789 10 100 1000 Water flow in kg/h s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 65

Product details The new connection sets with factory preset k V valves Valve performance limits of valve inserts for the Ascotherm eco connection sets Please note the valve performance limits in relation to the system parameters Standard valve insert V5K S Product details Presetting k vs value 1 0,16 1,5 0,21 2 0,24 2,5 0, 3 0,34 3,5 0,41 4 0,44 4,5 0,54 5 0,65 5,5 0,82 6 0,98 6,5 1,11 7 1,23 7,5 1,33 8 1,43 Δp [mbar] Temperature difference ΔT [K] 2 4 6 8 10 12 15 20 60 92 183 275 366 458 549 686 915 80 106 211 317 3 528 634 793 1057 100 118 236 354 473 591 709 886 1182 120 129 259 388 518 647 777 971 1294 140 140 280 419 559 699 839 1049 1398 60 120 240 360 480 601 721 901 1201 80 139 277 416 555 694 832 1040 1387 100 155 310 465 620 775 9 1163 1551 120 170 340 510 680 849 1019 1274 1699 140 183 367 5 734 917 1101 1376 1835 60 137 275 412 549 686 824 10 1373 80 159 317 476 634 793 951 1189 1585 100 177 354 532 709 886 1063 1329 1772 120 194 388 582 777 971 1165 1456 1941 140 210 419 629 839 1049 1258 1573 2097 60 169 337 6 675 844 1012 1266 1687 80 195 390 585 779 974 1169 1461 1948 100 218 436 654 871 1089 17 1634 2178 120 239 477 716 955 1193 1432 1790 2386 140 258 516 773 1031 1289 1547 1933 2578 60 194 389 583 778 972 1167 1459 1945 80 225 449 674 898 1123 1347 1684 2246 100 251 2 753 1004 1255 16 1883 2511 120 275 5 825 1100 1375 16 2063 27 140 297 594 891 1188 1485 1782 2228 2971 60 235 469 704 938 1173 1407 1759 2345 80 271 5 812 1083 1354 1625 2031 2708 100 3 606 908 1211 1514 1817 2271 28 120 332 663 995 1327 1658 1990 2487 3317 140 358 716 1075 1433 1791 2149 2687 3582 60 252 3 755 1007 1258 1510 1888 2517 80 291 581 872 1162 1453 1744 2180 2906 100 325 6 975 10 1625 19 2437 3249 120 356 712 1068 14 1780 2136 2669 3559 140 384 769 1153 1538 1922 27 2883 3845 60 9 618 927 1236 1544 1853 2317 89 80 357 713 1070 17 1783 2140 2675 3567 100 399 798 1196 1595 1994 2393 2991 3988 120 437 874 1310 1747 2184 2621 3276 4368 140 472 944 1415 1887 2359 2831 3539 4718 60 372 744 1115 1487 1859 2231 2789 3718 80 9 859 1288 1717 2147 2576 3220 93 100 480 960 1440 1920 2400 2880 3600 4800 120 526 1052 1577 2103 2629 3155 3944 5258 140 568 1136 1704 2272 2840 3408 60 5679 60 469 938 1407 1876 2345 2814 3518 4690 80 5 1083 1625 2166 2708 32 4062 5416 100 606 1211 1817 22 28 3633 4541 6055 120 663 1327 1990 2653 3317 3980 4975 6633 140 716 1433 2149 2866 3582 99 5374 7165 60 561 1121 1682 22 2803 3363 04 5606 80 647 1295 19 2589 3236 3884 4855 6473 100 724 1447 2171 2895 3618 43 58 7237 120 793 1586 2378 3171 3964 4757 5946 7928 140 856 1713 2569 35 81 5138 62 8563 60 635 1270 1905 2540 3175 3810 4762 6349 80 733 1466 2199 2933 3666 4399 5499 7331 100 820 1639 2459 3279 4098 4918 6148 8197 120 898 1796 2694 3592 4490 5388 6734 8979 140 970 1940 2910 3879 4849 5819 7274 9699 60 704 1407 2111 2814 3518 21 5277 7036 80 812 1625 2437 32 4062 4874 6093 8124 100 908 1817 2725 3633 4541 54 6812 9083 120 995 1990 2985 3980 4975 5970 7462 99 140 1075 2149 3224 99 5374 6448 8060 10747 60 761 1522 2282 43 3804 4565 5706 7608 80 878 1757 2635 3514 4392 5271 6588 8785 100 982 1964 2946 3929 4911 5893 7366 9821 120 1076 2152 3228 44 5379 6455 8069 10759 140 1162 2324 3486 4648 5810 6973 8716 11621 60 818 1636 2454 3272 4090 4908 6135 8180 80 945 1889 2834 3778 4723 5667 7084 9445 100 1056 2112 3168 24 5280 6336 7920 10560 120 1157 2314 3470 4627 5784 6941 8676 11568 140 1249 2499 3748 4998 6247 7497 9371 12495 66 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

Product details The new connection sets with factory preset k V valves Fine-adjusting valve insert V5K F Presetting 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,56 8 k vs value up to 0,06 0,06 0,07 0,07 0,08 0,09 0,1 0,11 0,12 0,15 0,17 0,21 0,25 0,37 0,5 Pressure loss in mbar 1000 8 9 6 7 5 4 3 2 100 8 9 6 7 5 4 3 2 Product details 1 2 3 4 5 6 7 8 1,5 2,5 3,5 4,5 5,5 6,5 7,5 10 2 3 4 5 6789 2 3 4 5 6789 10 100 1000 Water flow in kg/h s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 67

Product details The new connection sets with factory preset k V valves Valve performance limits of valve inserts for the Ascotherm eco connection sets Please note the valve performance limits in relation to the system parameters Fine-adjusting valve insert V5K F Product details Presetting k vs value 1 0,06 1,5 0,06 2 0,07 2,5 0,07 3 0,08 3,5 0,09 4 0,10 4,5 0,11 5 0,12 5,5 0,15 6 0,17 6,5 0,21 7 0,25 7,5 0,37 8 0, Δp [mbar] Temperature difference ΔT [K] 2 4 6 8 10 12 15 20 60 34 69 103 137 172 206 257 343 80 40 79 119 159 198 238 297 396 100 44 89 133 177 222 266 332 443 120 49 97 146 194 243 291 364 485 140 52 105 157 210 262 315 393 524 60 34 69 103 137 172 206 257 343 80 40 79 119 159 198 238 297 396 100 44 89 133 177 222 266 332 443 120 49 97 146 194 243 291 364 485 140 52 105 157 210 262 315 393 524 60 40 80 120 160 200 240 0 400 80 46 92 139 185 231 277 347 462 100 52 103 155 207 258 310 388 517 120 57 113 170 227 283 340 5 566 140 61 122 183 245 6 367 459 612 60 40 80 120 160 200 240 0 400 80 46 92 139 185 231 277 347 462 100 52 103 155 207 258 310 388 517 120 57 113 170 227 283 340 5 566 140 61 122 183 245 6 367 459 612 60 46 92 137 183 229 275 343 458 80 53 106 159 211 264 317 396 528 100 59 118 177 236 295 354 443 591 120 65 129 194 259 324 388 485 647 140 70 140 210 280 3 419 524 699 60 51 103 154 206 257 9 386 515 80 59 119 178 238 297 357 446 594 100 66 133 199 266 332 399 498 665 120 73 146 218 291 364 437 546 728 140 79 157 236 315 393 472 590 786 60 57 114 172 229 286 343 9 572 80 66 132 198 264 3 396 495 660 100 74 148 222 295 369 443 554 738 120 81 162 243 324 404 485 607 809 140 87 175 262 3 437 524 655 874 60 63 126 189 252 315 378 472 629 80 73 145 218 291 363 436 545 727 100 81 162 244 325 406 487 609 812 120 89 178 267 356 445 534 667 890 140 96 192 288 384 481 577 721 961 60 69 137 206 275 343 412 515 686 80 79 159 238 317 396 476 594 793 100 89 177 266 354 443 532 665 886 120 97 194 291 388 485 582 728 971 140 105 210 315 419 524 629 786 1049 60 86 172 257 343 9 515 644 858 80 99 198 297 396 495 594 743 991 100 111 222 332 443 554 665 831 1108 120 121 243 364 485 607 728 910 1213 140 131 262 393 524 655 786 983 1311 60 97 194 292 389 486 583 729 972 80 112 225 337 449 561 674 8 1123 100 126 251 377 2 628 753 9 1255 120 138 275 413 5 688 825 1031 1375 140 149 297 446 594 743 891 1114 1485 60 120 240 360 480 601 721 901 1201 80 139 277 416 555 694 832 1040 1387 100 155 310 465 620 775 9 1163 1551 120 170 340 510 680 849 1019 1274 1699 140 183 367 5 734 917 1101 1376 1835 60 143 286 9 572 715 858 1073 14 80 165 3 495 660 826 991 1238 1651 100 185 369 554 738 923 1108 1385 1846 120 202 404 607 809 1011 1213 1517 2022 140 218 437 655 874 1092 1311 1638 2184 60 212 3 635 847 1058 1270 1587 2116 80 244 489 733 978 1222 1466 1833 2444 100 273 546 820 1093 1366 1639 2049 2732 120 299 599 898 1197 1497 1796 2245 2993 140 323 647 970 1293 1616 1940 25 3233 60 286 572 858 1144 14 1716 2145 2860 80 3 660 991 1321 1651 1981 2477 32 100 369 738 1108 1477 1846 2215 2769 3692 120 404 809 1213 1618 2022 27 34 4045 140 437 874 1311 1748 2184 2621 3277 4369 68 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

Product details The new connection sets with factory preset k V valves Factory k V presetting of the valves KRP91 H 92 120 1 200 T 185 210 260 310 360 400 185 210 260 310 360 400 185 210 260 310 360 400 185 210 260 310 360 400 L Preset k V values 1000 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 12 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 2,5 2,5 10 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5 5,5* 5,5* 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 17 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5 5,5* 5,5* 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 2000 5,5* 5,5* 5,5* 5,5* 5,5* 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 4,5 22 5,5* 5,5* 5,5* 5,5* 5,5* 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 4,5 4,5 20 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 4,5 4,5 27 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 00 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 32 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 2,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 5,5* 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 6,0 37 5,5* 2,5 2,5 2,5 2,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 6,0 4000 2,5 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 6,0 6,0 2,5 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 6,0 6,0 40 2,5 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 4,5 6,0 2,5 4,5 4,5 4,5 6,0 6,0 47 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 4,5 6,0 4,5 4,5 4,5 4,5 6,0 6,0 00 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 6,0 6,0 4,5 4,5 4,5 6,0 6,0 6,0 * Fine-adjusting valve Dimensioning: Heat outputs at 70 / 55 / 20 C, Pressure loss across the valve 100 mbar Product details s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 69

Product details The new connection sets with factory preset k V valves Factory k V presetting of the valves KRN92 H 110 1 200 T 185 210 260 310 360 400 185 210 260 310 360 400 185 210 260 310 360 400 L Preset k V values 1000 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 12 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 10 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 17 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 2,5 2,5 2000 5,5* 5,5* 5,5* 5,5 5,5 5,5 5,5* 5,5* 5,5* 5,5* 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 22 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 20 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 27 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 00 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 32 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 4,5 4,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 4,5 5,5* 5,5* 2,5 2,5 4,5 4,5 37 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 4000 5,5* 5,5* 2,5 2,5 2,5 4,5 5,5* 5,5* 2,5 2,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 40 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 2,5 2,5 4,5 4,5 4,5 47 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 Product details 00 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 * Fine-adjusting valve Dimensioning: Heat outputs at 70 / 55 / 20 C, Pressure loss across the valve 100 mbar 70 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

Product details The new connection sets with factory preset k V valves Factory k V presetting of the valves KRN81 H 110 T 185 210 260 310 360 L Preset k V values 12 2,5 2,5 2,5 2,5 4,5 10 2,5 2,5 2,5 2,5 4,5 17 2,5 2,5 4,5 4,5 4,5 2000 4,5 4,5 4,5 4,5 6 22 4,5 4,5 4,5 4,5 6 20 4,5 4,5 6 6 6 27 4,5 6 6 6 6 00 4,5 6 6 6 6 32 4,5 6 6 6 6 6 6 6 6 8 37 6 6 6 6 8 4000 6 6 6 8 8 Dimensioning: Heat outputs at 70 / 55 / 20 C, Pressure loss across the valve 100 mbar Product details s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 71

Product details The new connection sets with factory preset k V valves Factory k V presetting of the valves KC 281 H 1 155 T 310 360 310 360 L Preset k V values 12 6 6 6 8 2000 0* 0* 0* 0* 27 0* 0* 0* 0* Note: On the KC2 81, the valve inserts are preset in relation to the cooling capacity, since the water flow rate required for cooling is usually higher than for heating. Dimensioning: Cooling capacities at 16 / 18 / 27 C, Pressure loss across the valve 100 mbar KC 481 H 1 155 T 3 360 3 360 L Preset k V values 12 6 6 6 6 2000 0* 0* 0* 0* 27 0* 0* 0* 0* Product details Dimensioning: Cooling capacities at 16 / 18 / 27 C, Pressure loss across the valve 100 mbar KC 481 H 1 155 T 3 360 3 360 L Preset k V values 12 4,5 4,5 4,5 4,5 2000 6 8 6 8 27 8 0* 8 0* Dimensioning: Heat outputs at 70 / 55 / 20 C, Pressure loss across the valve 100 mbar * Wherever kv preset values are stated as 0, the maximum convector outputs are above the valve performance limits for the indicated system parameters. In this case, it is necessary to check whether the dimensioned output is within the valve performance limits. See data under valve performance limits. 72 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

Arbonia Individual Special versions Angled version Available for all versions and for empty pan Angle can be between and 320 Please provide a dimensional drawing or template with the order. Feasibility depends on engineering review Radiator must still be transportable Dimensional drawing Ordering code BES Floor pan Additional price / bevel cut Linear Roll-up WA T L2 L1 T W A L2 90 Single bevel L1 270 76 77 1) 49,00 46,00 164,00 L2 T WA L1 L2 T WA α L1 α 1) Characteristic 77 for bevel cut at both ends L1, L2: Length of the limbs, measured on the wall α: Angle T: Depth floor pan WA: Wall spacing Ascotherm eco Individual s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 73

R Ascotherm eco Arbonia Individual Special versions Curved version Available for KRP91 (other versions on request) Bending radius R: at least 1000 mm Please provide a dimensional drawing or template with the order. Feasibility depends on engineering review Radiator must still be transportable Dimensional drawing Ordering code BES Additional price per radiator L R T WA Inside radius 70 On request L WA T Ascotherm eco Individual L: Streched length R: Bending radius (wall radius) T: Depth floor pan WA: Wall spacing Outside radius 74 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

Arbonia Individual Special versions Column section version Available for all versions and for empty pan Please provide a dimensional drawing or template with the order. Feasibility depends on engineering review Radiator must still be transportable Dimensional drawing Column section according to drawing column section in floor pan column section in linear column section in roll-up Ordering code IBESI Additional price per column section Floor pan Linear Roll-up Ød A 75 On request On request On request Ascotherm eco Individual C Ød C Ød A A C C C C A B A B A B d: Diameter A: Inset dimension for length B: Edge dimension C: Inset dimension for depth s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 75

Arbonia Individual Special versions Version with impact sound insulation Without impact sound insulation With impact sound insulation Description Standard version Ordering code IEBTI Additional price per metre TS1 39,00 Impact sound insulation 4 mm Coupled Ascotherm radiators are supplied individually Connection material (flexible connection hoses etc. available as accessory) Only for versions KRP91 (not for H 1 and H 200), KRN92, KRN81 On version KRN81 (max. up to 4 motors) without Connection system Connection on the same side from the left Description Radiator position 2 repeats when coupling more than 3 radiators Please provide a drawing with the order Initial radiator 1 Middle radiator 2 Final radiator 3 Ordering code KHP Sequence of coupled radiatorsδ(enter in column "Special characteristics") Additional price per radiator Ascotherm eco Individual Connection on the same side from the right Radiator position 2 repeats when coupling more than 3 radiators Please provide a drawing with the order Final radiator 3 Middle radiator 2 Initial radiator 1 75 67,00 76 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

Arbonia Individual Special versions Air connection with air connection valve Number of air connections LAZ Length Description and dimensional drawings 1 00 mm Standard: 1 air connection, incl. air valve Additional air connections possible (max. number and location on request) Air connections are distributed evenly (to the extent technically possible) The exact positioning of the air connections can be seen in the drawing Air connection arrangement LAP 1) Height H Connection size LAG Additional price per additional connection 110, 1, 200 63 39,00 1, 200 80 41,00 200 100 44,00 200 125 46,00 2 > 00 mm Standard: 2 air connections, incl. air valves Additional air connections possible (max. number and location on request) Air connections are distributed evenly (to the extent technically possible) The exact positioning of the air connections can be seen in the drawing Special connections - Version per drawing - LAP = SON No clear assignment of positions, since floor pan joined at the factory 110, 1, 200 63 39,00 1, 200 80 41,00 200 100 44,00 200 125 46,00 On request 1) The positioning of the air connections is affected slightly by the arrangement of the cross bracing in the floor pan, example: connection F (room side, centred) = "approx. centred" The exact dimensions/positions can be seen in the drawing and need to be approved by the customer. Number and positions of the air connections L/2 ±75 L/2 ±75 L 00 L/4 ±1 L/4 ±1 L > 00 Ascotherm eco Individual s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 77

Arbonia Individual Special versions Additional special versions Pressure version Description High-pressure version Characteristic Ordering code Additional price per radiator 16 bar (1600 kpa) DRU 16 + 5 % Special versions Special length for heating 1) > 1000 mm (KRP91 and KRN92) > 12 mm possible (KRN81) Special length for heating and cooling 1) BES SBL Next-larger standard length > 12 mm possible BES SBL On request Extra-short length (smaller than smallest standard length) 600 mm - < 1000 mm possible (KRP91 and KRN92) 1000 mm - < 12 possible (KRN81) 8 mm - < 12 mm possible (KC281) 10 mm - < 12 mm possible (KC481) BES SBL On request Special depth acc. to drawing 2) BES SBT On request Special height according to drawing 3) BES SBH On request Fixing Fixing with special bracket (in case of high soil structure) On request Special finish 1) Provide exact length 2) Provide exact depth 3) Provide exact height Finished in special colour (no RAL colour) Aluminium linear / aluminium roll-up AUS SF On request Floor pan and register FAR1 99 On request Finished in other RAL colour (standard is RAL 7016) Floor pan and register FAR1 SF + % Ascotherm eco Individual 78 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

Ascotherm eco Individual On request, accessory components, available factory-installed Available on request Edge bar Description Anodised in natural colour ELO = Anodised in natural colour RDL ELO Colour anodised BRO = Anodised in bronze finish MES = Anodised in brass finish DKS = Anodised in dark silver finish SWZ = Anodised in black finish EDS = Anodised in stainless steel finish Paint finish FAR1 = Edge bar finished as floor pan/register RDL FAR1 RDL Characteristic Ordering code BRO MES DKS SWZ EDS Additional price per metre 11,00 11,00 11,00 11,00 11,00 FAR2 = Edge bar finished as top RDL FAR2 49,00 Air-intake filter For KRN81 air-intake filter PPI dark 90 x 3 mm FVL FV 8,00 For KC281 and KC481 air -ntake filter PPI dark 140 x 3 mm FVL FV 9,00 Accessory components, factory-installed Description Characteristic Ordering code Additional price per radiator Installation Connection set, straight form with preset k v valve Consisting of: Valve base with factory preset kv valve DN 15, both sides 3 / 4 external thread with euro taper M x 1,5 nickel-plated, protective cap Return fitting with shut-off DN 15, both sides 3 / 4 external thread with euro taper nickel-plated Threaded fitting attached only hand-tight For all KRN, KRP91 and KC281 with connection 11 or 33 For KC481 with connection 11 or 33 VRS VRS 44,00 VRS VRS 88,00 Connection set, angled version with preset k v valve Consisting of: Valve base with factory preset kv valve DN 15, both sides 3 / 4 external thread with euro taper M x 1,5 nickel-plated, protective cap Return fitting with shut-off DN 15, both sides 3 / 4 external thread with euro taper nickel-plated Threaded fitting attached only hand-tight For KC281 with connection BB or DD For KC481 with connection BB or DD VRS VRS 44,00 VRS VRS 88,00 Connection set, angled version with preset k v valve, connection arrangement 66/88 Consisting of: Valve base with factory preset kv valve DN 15, outlet 3 / 4 external thread with euro taper, inlet 1 / 2 internal thread M x 1,5 nickel-plated, protective cap Return fitting with shut-off DN 15, both sides 3 / 4 external thread with euro taper nickel-plated Threaded fitting attached only hand-tight For KRP91, KRN92 and KRN81 VRS VRS 44,00 Ascotherm eco Individual Thermoelectric actuator 2 V AC Factory-installed Only in conjunction with VRS For KRP91 and KRN92 STT STT 29,00 Thermoelectric actuator 24 V DC Factory-installed and with controller board wired Only in conjunction with VRS For KRN81 and KC281 STT STT 92,00 For KC481 STT STT 184,00 KNX plugin card (for KRN81, KC281 and KC481) for installation in the Ascotherm eco control board to connect to KNX networks, only 1 per convector group is needed (up to 6 convectors) For KRN81, KC281 and KC481 GLT KNX 146,00 s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 79

Accessories Empty floor pan Ascotherm eco empty floor pan For the... Arbonia offers an Ascotherm empty floor pan in its accessories range. The range available (H / B / T) and the special or extra-short empty floor pan lengths are listed at the individual versions. Accessories Description Product code Empty floor pan ZA0108 Characteristic Dimensions Heights: 92, 110, 120, 1, 1, 155, 200 mm Depths: 185, 210, 260, 310, 3, 360, 400 mm Lengths variable: 200 00 mm Finish Standard in anthracite grey (RAL 7016 matt finish) Top version Standard in aluminium, anodised in natural colour Material Galvanised sheet steel, colour-coated Dimensions Ordering code 3.1 3.4 Product Version Ordering code 3 1) Dimensions HOE and MT need to be stated with the order (for description, see chapter "General information") s for other colours, see chapter "Ascotherm top s" and "Special versions". per piece [EUR/pc.] per metre without [EUR/m] per metre with [EUR/m] per metre without [EUR/m] 92 185 ZA0108 111, 89,04 179,96 179,96 210 1) 111, 100,17 195,82 195,82 260 111, 111, 219,93 219,93 310 111, 122,43 254,68 254,68 360 111, 133,56 279,98 279,98 400 111, 144,69 2,03 2,03 110 185 ZA0108 111, 100,17 191,09 191,09 210 1) 111, 111, 206,95 206,95 260 111, 122,43 231,06 231,06 310 111, 133,56 265,81 265,81 360 111, 144,69 291,11 291,11 400 111, 155,82 313,16 313,16 120 185 ZA0108 1) 111, 100,17 271,38 271,38 210 111, 111, 282,62 282,62 260 111, 122,43 296,68 296,68 310 111, 133,56 191,09 191,09 360 111, 144,69 206,95 206,95 400 111, 155,82 231,06 231,06 1 310 ZA0108 1) 111, 139,13 265,81 265,81 3 111, 144,70 291,11 291,11 360 111, 1,26 313,16 313,16 1 185 ZA0108 111, 111, 202,22 202,22 210 1) 111, 122,43 218,08 218,08 260 111, 133,56 2,19 2,19 310 111, 144,69 276,94 276,94 360 111, 155,82 2,24 2,24 400 111, 166,95 324,29 324,29 155 310 ZA0108 111, 1,26 282,51 282,51 3 1) 111, 155,83 293,75 293,75 360 111, 161,40 7,82 7,82 200 185 ZA0108 111, 122,43 213,35 213,35 210 1) 111, 133,56 229,21 229,21 260 111, 144,69 253,32 253,32 310 111, 155,82 288,07 288,07 360 111, 166,95 313,37 313,37 400 111, 178,08 335, 335, 80 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.