HORIZONTAL MULTISTAGE PUMPS

COMPACT HORIZONTAL MULTISTAGE PUMPS Horizontal centrifugal multistage pumps suitable for pressure boosting systems, car washing, small garden irrigation and general clean water pumping. SPECIFICATIONS Maximum working pressure Maximum liquid temperature MATERIALS Pump body and bracket in cast iron External casing in AISI 304 Impeller and diffuser in technopolymer Shaft in AISI 46 Mechanical seal in carbon/ceramic/nbr : 0 bar : 35 C according EN 6033524 for domestic use 40 C for other uses TECHNICAL DATA Asynchronous 2 pole motor Insulation: Class F Protection degree: IP44 ~230V ± 0% 50Hz, 3~230/400V ± 0% 50Hz Permanent split capacitor and automatic thermal overload protection for singlephase version Thermal protection to be provided by the user for threephase version DNM DNA /4 for COMPACT B/2 and B/5, for other models DIMENSIONAL TABLE 57

COMPACT PERFORMANCE CURVES PERFORMANCE TABLE 58

COMPACT BOOSTER COMPACT BOOSTER MODEL AM PT Horizontal centrifugal multistage pumps suitable for pressure boosting systems, car washing, small garden irrigation and general clean water pumping. SPECIFICATIONS Maximum working pressure Maximum liquid temperature FEATURES / BENEFITS Fully tested & assembled unit Ensure troublefree operation. Stainless steel pump set used Hygienic and corrosionfree water. EBARA year warranty on all components used More value for money. Quiet operation Good and enjoyable pressure expected. Nationwide Dealers representation Aftersales services assurance. : 0 bar : 35 C according EN 6033524 for domestic use 40 C for other uses TECHNICAL DATA Asynchronous 2 pole motor Insulation: Class F Protection degree: IP44 ~230V ± 0% 50Hz, 3~230/400V ± 0% 50Hz Permanent split capacitor and automatic thermal overload protection for singlephase version Thermal protection to be provided by the user for threephase version MODEL kw *Application /min m 3 /h 20.2 30.8 40 2.4 50 3 60 3.6 80 4.8 Connection Compact Booster AM 6PT Compact Booster AM 8PT 0.4 0.6 Head in m 30.7 39.7 28.2 36. 25.2 32 2.8 27.4 8 22.4 9 0.5 x x *For guidance only 59

COMPACT BOOSTER COMPACT BOOSTER MODEL AM PT DIMENSION Y TANK TANK PRESSURE SWITCH 66 80 X H H2 DNA E NPT PRESSURE GAUGE PRESSURE SWITCH & SENSOR 00 30 A R C D B M FRONT VIEW SIDE VIEW Pump Type kw A B C D Dimensions (mm) E H H2 M R X Y Tank (Lit) DNA Single Phase ~ COMPACT AM 6PT 0.4 83.5 333.3 08 5.5 46.5 27.5 38.5 62 46.5 37 203 8 NPT COMPACT AM 8PT 0.6 83.5 359.5 34 5.5 72.5 27.5 38.5 62 72.5 370 275 8 NPT 60

COMPACT BOOSTER COMPACT BOOSTER MODEL AM PC OPERATING FEATURES Quiet operation, thanks to EBARA design that makes this possible Starts and stops the pump when the tap is opened or closed Maintain pressure at a constant level during operation, eliminating hot/cold shower fluctuations Shuts off the pump if loss of prime or dryrunning occurs Ensure your pump system to operate at optimum performance PC CONTROLLER PRESSCONTROL (PC) is an electronic device ensuring optimum control of automatic water pressure system. An intelligent combination of hydraulic and electronic knowhow, PC controller monitors both pressure and flow and automatically controls the pump efficiently. No pressure tank required and no adjustment of pressure setting is required. Also, any risk of pump damage as a result of dry running is eliminated, as the device will automatically cutoff should the incoming water supply is insufficient. Much more compact than traditional system, EBARA COMPACT BOOSTER type AMPC is absolutely quiet, durable and simple to install. COMPACT BOOSTER MODEL AM PC MODEL kw *Application /min m 3 /h 20.2 30.8 40 2.4 50 3 60 3.6 80 4.8 Connection Compact Booster AM 6PC Compact Booster AM 8PC 0.4 0.6 Head in m 30.7 39.7 28.2 36. 25.2 32 2.8 27.4 8 22.4 9 0.5 x x *For guidance only 6

COMPACT BOOSTER COMPACT BOOSTER MODEL AMPC DIMENSION Ø25 Ø25 PRESS CONTROL 66 H H2 DNA 50 00 30 A R C D B M FRONT VIEW SIDE VIEW Pump Type kw A B C D Dimensions (mm) E H H2 M R DNA Single Phase ~ COMPACT AM 6PC 0.4 83.5 333.3 08 5.5 46.5 27.5 38.5 62 46.5 NPT COMPACT AM 8PC 0.6 83.5 359.5 34 5.5 72.5 27.5 38.5 62 72.5 NPT 62

MATRIX STAINLESS STEEL CENTRIFUGAL PUMP APPLICATIONS Water distribution and treatment Industrial washing equipment Heating and airconditioning Pressure boosting Industrial plants Irrigation Industrial & domestic pumping General boosting application SPECIFICATIONS Maximum liquid temperature: 0 C Maximum working pressure: 0 bar Maximum chlorine content: 500 ppm MATERIALS Casing, impeller, intermediate casing, casing cover and shaft in AISI 304 Mechanical seal in Carbon/Ceramic/EPDM Bracket and motor casing in aluminium Type Key MATRIX 3 9 T /.5 M N OF IMPELLERS m 3 /h MAX. EFFICIENCY MODEL T: THREADED PIPE CONNECTION SINGLE PHASE; OTHERWISE 3 PHASE MOTOR OUTPUT IN kw 0.45 0.65 0.75 0.9.3.5 2.2 3.0 4.0 2 3 4 5 6 7 8 9 3 5 0 8 63

MATRIX SPECIFICATIONS Liquid handled Max pressure Construction Pipe connection Material Type of liquid Applicable standard of test Max temperature [ C] Min temperature [ C] Max chlorine content Impeller Motor bearings Pump bearing [MPa] Suction / Discharge (threads according ISO 228) Casing Impeller Intermediate casing Orings Casing cover Shaft seal Liner ring Shaft (wet extension) Bracket MATRIX 35 n 789 impellers MATRIX 0 n 6 impellers MATRIX 8 n 56 impellers MATRIX 3 MATRIX 5 MATRIX 0 MATRIX 8 PUMP MOTOR Water, moderate aggressive solutions, glycol solutions, moderate viscous fluids 0 5 500ppm Closed centrifugal type Screened ball bearing greased for life Type : Sleeve Shaft sleeve : Tungsten Carbide Bearing : Ceramic G G G /4" G G /2" G /4" G 2" G /2" EN.430 (AISI 304) EN.430 (AISI 304) EN.430 (AISI 304) EPDM EN.430 (AISI 304) Ceramic / Carbon / EPDM EN.430 (AISI 304) + PTFE EN.430 (AISI 304) Die cast aluminium ISO 9906 Annex A Type Electric asynchronous TEFC Singlephase Threephase No. of poles Rotation speed Insulation Max ambient temperature Protection degree Power rating Frequency Voltage Capacitor Overload protection Casing material Base material Motor bracket Dimensions of cable entry [rpm] [ C] [kw] [HP] [Hz] [V] 2 ~ 2850 Class F 40 IP 55 0.45 2.2 0.45 4.0 0.6 3.0 0.6 5.5 50 230 ± 0% 230/400 ± 0% Builtin Builtin Provided by the user Aluminium Aluminium PG M20x.5 PG / PG3.5 64

MATRIX PERFORMANCE CHART (according to ISO 9906 Annex A) PERFORMANCE TABLE PERFORMANCE TABLE Pump type Power Q=Capacity l/min 0 20 30 45 60 80 00 30 60 200 250 300 350 400 450 Singlephase Threephase kw HP m 3 /h 0.2.8 2.7 3.6 4.8 6 7.8 9.6 2 5 8 2 24 27 H=Total head 32(.)/0.45M 32(.)/0.45 0.45 0.6 22.6 20,9 9.6 7 3.6 8 33(.)/0.65M 33(.)/0.65 0.65 0.9 33.9 3.4 29.3 25.5 20.4 2 34(.)/0.65M 34(.)/0.65 0.65 0.9 45 42 39. 34 27.2 6 35(.)/0.75M 35(.)/0.75 0.75 56.5 52.5 49 42.5 34 20 36(.)/0.9M 36(.)/0.9 0.9.2 68 62.5 58.5 5 4 24 37(.)/.3M 37(.)/.3.3.8 79 73 68.5 59.5 47.5 28 38(.)/.3M 38(.)/.3.3.8 90.5 83.5 78 68 54.5 32 39(.)/.5M 39(.)/.5.5 2 02 94 88 76.5 6 36 52(.)/0.45M 52(.)/0.45 0.45 0.6 23 2.5 20.5 9.3 7.4 4.7 8.8 53(.)/0.65M 53(.)/0.65 0.65 0.9 34.5 32.3 30.7 29 26 22 3.2 54(.)/0.9M 54(.)/0.9 0.9.2 46 43 4 38.6 34.7 29.4 7.6 55(.)/.3M 55(.)/.3.3.8 57.5 54 5 48.5 43.5 36.7 22 56(.)/.3M 56(.)/.3.3.8 69 64.5 6.5 58 52 44 26.4 57(.)/.5M 57(.)/.5.5 2 80.5 75.5 72 67.5 6 5.5 30.8 58(.)/2.2M 58(.)/2.2 2.2 3 92 86 82 77 69.5 58.5 35.2 59(.)/2.2M 59(.)/2.2 2.2 3 04 97 92 87 78 66 39.6 02(.)/0.75M 02(.)/0.75 0.75 24 22.2 2.4 20.6 9. 7 2.8 5.8 03(.)/.3M 03(.)/.3.3.8 36 33.3 32. 30.9 28.6 25.5 9.3 8.7 04(.)/.5M 04(.)/.5.5 2 48 44.5 43 4 38. 34 25.7.6 05(.)/2.2M 05(.)/2.2 2.2 3 60 55.5 53.5 5.5 47.5 42.5 32. 4.5 06(.)/2.2M 06(.)/2.2 2.2 3 72 66.5 64.5 62 57 5 38.5 7.4 82(.)/.5M 82(.)/.5.5 2 24.2 22 2.3 20.2 8.7 6.8 4.2 0.3 5.2 83(.)/2.2M 83(.)/2.2 2.2 3 36.3 33 3.9 30.4 28. 25.2 2.3 5.5 7.8 84(.)/3 3 4 48.5 44 42.5 40.5 37.4 33.6 28.4 20.6 0.4 85(.)/4 4 5.5 60.5 55 53 50.5 47 42 35.5 25.8 3 86(.)/4 4 5.5 72.5 66 64 60.5 56 50.5 42.5 30.9 5.6 65

MATRIX PERFORMANCE CURVES Matrix 3 Matrix 5 Matrix 0 Matrix 8 66

MATRIX DIMENSION MATRIX 3 Pump type Dimensions (mm) Power D D2 B C D F H3 H4 L R T V W Weight kw HP (3) () () (3) (kg) MATRIX 32T/0.45M 0.45 0.6 360 7 03 200 84 5.5 PG 8.5 MATRIX 32T/0.45 0.45 0.6 360 7 03 92 5.5 PG 8.4 MATRIX 33T/0.65M 0.65 0.9 360 7 03 200 84 5.5 PG 9.9 MATRIX 33T/0.65 0.65 0.9 360 7 03 92 5.5 PG 9.8 MATRIX 34T/0.65M 0.65 0.9 384 7 27 200 84 75.5 PG 0.6 MATRIX 34T/0.65 0.65 0.9 384 7 27 92 75.5 PG 0.4 MATRIX 35T/0.75M 0.75 408 7 5 200 84 99.5 PG 2.5 MATRIX 35T/0.75 0.75 408 7 5 92 99.5 PG 2.4 MATRIX 36T/0.9M 0.9.2 432 7 75 29 06 223.5 M20x.5 3.7 MATRIX 36T/0.9 0.9.2 432 7 75 92 223.5 PG 3.7 MATRIX 37T/.3M.3.8 493 98 8 99 226 2 247.5 M20x.5 6.3 MATRIX 37T/.3.3.8 493 98 8 99 209 247.5 PG 6. MATRIX 38T/.3M.3.8 57 98 42 223 226 2 27.5 M20x.5 6.3 MATRIX 38T/.3.3.8 57 98 42 223 209 27.5 PG 6.8 MATRIX 39T/.5M.5 2 54 98 66 247 226 2 295.5 M20x.5 8.3 MATRIX 39T/.5.5 2 54 98 66 247 209 295.5 7.7 67

MATRIX DIMENSION MATRIX 5 0 8 Pump type FIG. Dimensions (mm) Power D D2 B C D F H3 H4 L R T V W Weight kw HP (3) () () (3) (kg) MATRIX 52T/0.45M MATRIX 52T/0.45 MATRIX 53T/0.65M MATRIX 53T/0.65 MATRIX 54T/0.9M MATRIX 54T/0.9 MATRIX 55T/.3M MATRIX 55T/.3 MATRIX 56T/.3M MATRIX 56T/.3 MATRIX 57T/.5M MATRIX 57T/.5 MATRIX 58T/2.2M MATRIX 58T/2.2 MATRIX 59T/2.2M MATRIX 59T/2.2 MATRIX 02T/0.75M MATRIX 02T/0.75 MATRIX 03T/.3M MATRIX 03T/.3 MATRIX 04T/.5M MATRIX 04T/.5 MATRIX 05T/2.2M MATRIX 05T/2.2 MATRIX 06T/2.2M MATRIX 06T/2.2 MATRIX 82T/.5M MATRIX 82T/.5 MATRIX 83T/2.2M MATRIX 83T/2.2 MATRIX 84T/3 MATRIX 85T/4 MATRIX 86T/4 2 2 2 2 2 2 2 2 0.45 0.45 0.65 0.65 0.9 0.9.3.3.3.3.5.5 2.2 2.2 2.2 2.2 0.75 0.75.3.3.5.5 2.2 2.2 2.2 2.2.5.5 2.2 2.2 3 4 4 0.6 0.6 0.9 0.9.2.2.8.8.8.8 2 2 3 3 3 3.8.8 2 2 3 3 3 3 2 2 3 3 4 5.5 5.5 /4 /4 /4 /4 /4 /4 /4 /4 /4 /4 /4 /4 /4 /4 /4 /4 /2 /2 /2 /2 /2 /2 /2 /2 /2 /2 2" 2" 2" 2" 2" 2" 2" /4 /4 /4 /4 /4 /4 /4 /4 /4 /4 /2 /2 /2 /2 /2 /2 /2 360 360 360 360 384 384 445 445 469 469 493 493 565 530 589 554 379 379 46 46 446 446 524 489 554 59 442 442 490 455 527 609 646 7 7 7 7 7 7 98 98 98 98 98 98 98 98 75 75 202 202 202 202 202 202 205 205 205 03 03 03 03 27 27 5 5 75 75 8 99 8 99 42 223 42 223 66 247 66 247 8 8 8 8 48 48 78 78 26 208 26 208 4 4 4 4 78.5 30.5 26 68 253.5 92 92 92 209 209 209 209 209 92 209 209 209 209 209 209 24 24 24 200 200 29 226 226 226 23 23 200 226 226 23 23 226 23 84 84 06 2 2 2 2 2 84 2 2 2 2 2 2 5.5 5.5 5.5 5.5 75.5 75.5 99.5 99.5 223.5 223.5 247.5 247.5 325.5 27.5 349.5 295.5 70.5 70.5 70.5 70.5 200.5 200.5 284.5 230.5 34.5 260.5 96.5 96.5 205.5 96.5 288 325.5 363 PG PG M20x.5 M20x.5 M20x.5 M20x.5 M20x.5 M20x.5 PG M20x.5 M20x.5 M20x.5 M20x.5 M20x.5 M20x.5 PG PG PG PG PG PG PG PG PG PG PG PG PG PG PG PG3.5 PG3.5 PG3.5 7.5 7.5 92 0 92 0 92 0 92 0 92 0 92 0 2.5 92 0 2.5 92 0 95 04 95 04 24.5 95 04 24.5 24.5 24.5 8.5 8.4 9.9 9.8 2.2 2. 5 4.5 5.2 5.6 7.2 6.6 22.3 8.7 22.8 8.8.3.2 4.7 3.9 5.6 5.4 2.3 7.9 22.4 8.3 4.5 4.3 20.6 7. 2.7 26.9 28. * M : / PH / 50Hz / 230V ; others 3PH / 50Hz / 45V 68

MULTIGO VERTICAL CENTRIFUGAL MULTISTAGE PUMPS Low noise Vertical Multistage Pump, the motor is cooled by pumped liquid, whilst simultaneously reducing the noise levels as the liquid passes around the motor within a water jacket. The double mechanical seal with interposed chamber containing lubrication fluid ensuring long life and reliability. Suitable for booster sets, water features and irrigation systems. This pump is also suitable for installations where the pump is required to run under flood conditions. Supplied with 5mts. Cable length type HO7 RNF. SPECIFICATIONS TECHNICAL DATA Maximum working pressure : 0 bar Asynchronous 2 pole motor cooled by the pumped liquid Maximum liquid temperature : Insulation: Class F 35 C according to EN 6033524 for domestic use Protection degree: IP68 40 C for other uses ~230V ± 0% 50Hz, 3~230/400V ± 0% 50Hz Permanent split capacitor and automatic thermal overload MATERIALS protection for singlephase version Pump body, casing cover, external casing Thermal protection to be provided by the user for threeand motor casing in AISI 304 phase version Impeller and diffuser in technopolymer DNA DNM /4 Shaft in AISI 46 Mechanical seal in carbon/ceramic/nbr DIMESIONAL TABLE 69

MULTIGO PERFORMANCE CURVES PERFORMANCE TABLE 70

EVM The new EVM pumps are vertical multistage centrifugal models, which come in various versions: Cast iron (EVMG), AISI 304 stainless steel (EVM), AISI 36 stainless steel (EVML) and WRASapproved (EVMW). APPLICATIONS Washing system Water treatment plants Reverse Osmosis system Some chemical applications Conditioning systems Heating systems Industrial boilers Pressure boosting for industrial systems MATERIALS Pump body, external casing, casing cover, impellers, diffusers, bearing sleeve, coupling guard and bolts in contact with liquid AISI 304 (EVM), AISI 36 (EVML), EVMG version: bottom casing in cast iron Tierods and bolts not in contact with liquid in zinc coated steel Shaft in AISI 36 Bearing in contact with liquids in tungstencarbide Bracket and base in cast iron Mechanical seal in SiC/Carbon/FPM (EVM3EVM5EVM0EVM8) Cartridge mechanical seal standard (EVM32EVM45EVM64) (F=round flanges; N=oval flanges) SPECIFICATIONS Maximum working pressure: 6 bar 25 bar 30 bar (only for EVM32EVM45) Liquid temperature: from 5 C up to +20 C from 5 C up to +85 C (for EVMW) TECHNICAL DATA Asynchronous 2 poles motor Insulation: Class F Protection: IP55 ~230V ± 0% 50Hz (up to 2.2 kw) 3~230/400V ± 0% 50Hz delta connection (up to 4 kw included) 3~400/690V ± 0% above 5.5kW 7

STANDARD SPECIFICATIONS EVM (G) Model Type 3 5 0 8 32 45 64 Application Water supply, Light industrial (boiler feed, washing, coolant, etc.) Temperature 5 to +20 C Flow / head 80 m 3 /hr (max): 300m (max) Max. working pressure.6/2.5mpa (6Bar/25Bar).6/2.5/3.0Mpa (6/25/30Bar) Sealing 6 bar: Mechanicalseal according to DIN Cartridge type Mechanicalseal 25 bar: Catridge Mechanicalseal according to DIN according to DIN Connecting flange OVAL or DIN TYPE DIN TYPE Material Impeller EN.430 (AISI 304) Intermediate casing EN.430 (AISI 304) Bottom casing EN.430 (AISI 304) EVM Cast iron (EVMG) Casing cover Cast iron Outer casing EN.430 (AISI 304) Shaft EN.440 (AISI 36) Liner ring EPDM/EN.430 (AISI 304) Motor bracket Cast iron Mechanical seal Silicon Carbide/Carbon/FPM Oring EPDM Motor No. of Poles 2P (3000rpm:50Hz Synchronous speed) Phase Three phase Voltage/Hz 380V/45:50Hz (or 400V:50Hz) Flange mount IM B4 (up to 4kW) (IEC motor) IM B5 (above 5.5kW) OPTIONAL SPECIFICATIONS Material of Construction All wetted parts in SUS304 available upon request. STANDARD SPECIFICATIONS EVM (L) Model Type 3 5 0 8 32 45 64 Application Water supply, R.O., D.I. Water, ultrafilter systems, process water, etc. Temperature range 5 to +20 C Flow / head 80 m 3 /hr (max): 300m (max) Max. working pressure.6/2.5mpa (6Bar/25Bar).6/2.5/3.0Mpa (6/25/30Bar) Sealing Cartridge Mechanicalseal according to DIN Connecting flange OVAL or DIN TYPE DIN TYPE Material Impeller EN.440 (AISI 36) Intermediate casing EN.440 (AISI 36) Bottom casing EN.440 (AISI 36) Casing cover EN.440 (AISI 36) Outer casing EN.440 (AISI 36) Shaft EN.440 (AISI 36) Liner ring PTFE/EN.440 (AISI 36) Motor bracket Cast iron/en.440 (AISI 36) Mechanical seal Silicon Carbide/Carbon/FPM Oring EPDM Motor No. of Poles 2P (3000rpm:50Hz Synchronous speed) Phase Three phase Voltage/Hz 380V/45:50Hz (or 400V:50Hz) Flange mount IM B4 (up to 4kW) (IEC motor) IM B5 (above 5.5kW) OPTIONAL SPECIFICATIONS Conneting flange Vitaulic coupling only for AISI 36 PUMP DIN round flange for 6 bar range 72

EVM EBARA Corporation was established in 92 as a pump manufacturer and today EBARA is the world s foremost manufacturer of pump and pump system. EBARA is proudly presenting Vertical Multistage pump type EVM, manufactured with great experience of EBARA in design and production of stamped stainless steel pumps, EBARA EVM pumps offer technically advance designs to meet most market demands, including pumping of aggressive liquids. Two standard pump options are available to satisfy most of the market requirements: EVM(G) : Bottom casing in cast iron, other liquid contact parts in SS304 stainless steel for general water supply usage. EVM(L) : All wetted contact upon parts in SS36 stainless steel for aggressive liquid pumping operation. Optional materials available upon request: All wetted contact parts in SS304 stainless steel for industrial pumping applications.. Quality motor used. Standard IEC electrical motor used for EVM pump; thus ensuring easy replacement as standard motor is easily available in the market. 2. Spacer coupling for userfriendly servicing. For kw & above models, uniquely designed split type spacer coupling are used to permit easy assembly/disassembly works without dismantling pipe work and motor. STANDARD IEC MOTOR WITH ALL BEARING 4. Wide selection options. Two (2) pump types are available as standard i.e. EVMG (Cast iron bottom casing; other wetted parts in SUS304) and EVML (All wetted parts in SUS36L). All wetted parts in SUS304 available as option. 5. EVM(G) Version FC/SUS304 Option: EVM Version SUS304 EVM (L) Version SUS36 High efficiency hydraulic design EBARA owned R&D has resulted in the newly developed hydraulic parts for EVM, particularly impellers and intermediate casing that provides high efficiency operation. 2D S/S impeller 3D S/S impeller BALL BEARING Heavy duty bearing set mounted on pump motor bracket, thus eliminating use of nonstandard motors to ensure reliable pump operation. 6. Guide vane intermediate casing Bottom casing support. For EVM 45 and 64, unique bottom casing bearing is used to enhance longer operating life of the pumps. 3. Cartridge mechanical seal. Cartridge mechanical seal is used for all pump models, except EVM 38 (6Bar). Thus permiting easy maintenance works at site. Tungsten carbide Bottom Bearing. 73

SELECTION CHART EVM 3 64 50 HZ IDENTIFICATION CODE EVM 3 64 Capacity (m 3 /min) EVM ( ) 5 8 0 N 5.5 (E) Model Series (G): Cast iron Bottom Casing (L): 36 SS ( ): 304 SS (option) Nominal Capacity (m 3 /hr) E: for inverted drive only M: for Single Phase only Power output in kw 50Hz N: Oval Flanges F: Round Flanges No. of Impeller No. of reduced impellers (only for EVM 32/45/64) 74

PERFORMANCE TABLE EVM 3508 50 Hz Pump Type Motor Maximum Q=Capacity working l/min 0 20 40 60 75 00 30 50 200 250 300 350 400 kw HP size pressure m 3 /h 0.2 2.4 3.6 4.5 6.0 7.8 9 2 5 8 2 24 [Mpa] H=Total manometric head in meters 3 2N5/0.37 0.37 0.5 7.6 8.6 6.7 4.0 0.3 6.6 3 3N5/0.37 0.37 0.5 7.6 27.9 25. 20.9 5.5 9.9 3 4N5/0.55 0.55 0.75 7.6 37.2 33.4 27.9 20.6 3.2 3 5N5/0.55 0.55 0.75 7.6 46.5 42.0 34.9 25.8 6.5 3 6N5/0.75 0.75 80.6 56.0 50.0 42.0 30.9 9.8 3 7N5/0.37 0.75 80.6 65.0 58.5 49.0 36. 23. 3 9N5/...5 80.6 84.0 75.0 63.0 46.5 29.7 3 N5/...5 80.6 02.0 92.0 77.0 56.5 36.3 3 3N5/.5.5 2 90S.6 2.0 09.0 90.5 67.0 43.0 3 5N5/.5.5 2 90S.6 40.0 25.0 05.0 77.5 49.5 3 8F5/2.2 2.2 3 90L 2.5 67.0 5.0 26.0 92.5 59.5 3 22F5/2.2 2.2 3 90L 2.5 205.0 84.0 54.0 3.0 72.5 3 26F5/3.0 3 4 00 2.5 242.0 27.0 82.0 34.0 86.0 5 2N5/0.37 0.37 0.5 7.6 20.2 8.4 6.9 5.4 2.2 6.9 5 3N5/0.55 0.55 0.75 7.6 30.2 27.6 25.3 23. 8.4 0.3 5 4N5/0.75 0.75 80.6 40.5 36.8 33.8 30.8 24.5 3.8 5 5N5/...5 80.6 50.5 46.0 42.0 38.6 30.6 7.2 5 6N5/...5 80.6 60.5 55.0 50.5 46.5 36.7 20.6 5 7N5/.5.5 2 90S.6 70.5 64.5 59.0 54.0 43.0 24. 5 8N5/.5.5 2 90S.6 80.5 73.5 67.5 6.5 49.0 27.5 5 0N5/2.2 2.2 3 90L.6 02.0 93.5 86.0 79.0 63.0 36.6 5 N5/2.2 2.2 3 90L.6 3.0 03.0 94.5 86.5 69.5 40.5 5 2N5/2.2 2.2 3 90L.6 23.0 2.0 03.0 94.5 75.5 44.0 5 4N5/3.0 3 4 00.6 43.0 3.0 20.0 0.0 88.0 5.0 5 6N5/3.0 3 4 00.6 64.0 50.0 38.0 26.0 0.0 58.5 5 8F5/4.0 4 5.5 2 2.5 84.0 68.0 55.0 42.0 3.0 66.0 5 9F5/4.0 4 5.5 2 2.5 94.0 78.0 63.0 50.0 20.0 69.5 5 22F5/4.0 4 5.5 2 2.5 225.0 206.0 89.0 73.0 39.0 80.5 5 24F5/5.5 5.5 7.5 32S 2.5 246.0 224.0 206.0 89.0 5.0 88.0 0 2N5/0.75 0.75 80 6 22.0 2.0 20.4 8.9 7.6 3.2 7.8 0 3N5/...5 80.6 33.0 3.6 30.5 28.4 26.4 9.8.7 0 4N5.5.5 2 90S.6 44.0 42.0 40.5 37.8 35.2 26.4 5.6 0 5N5/2.2 2.2 3 90L.6 55.0 52.5 5.0 47.5 44.0 33.0 9.5 0 6N5/2.2 2.2 3 90L.6 66.0 63.0 6.0 57.0 53.0 39.5 23.4 0 8N53.0 3 4 00.6 88.0 84.0 8.5 75.5 70.5 52.5 3.2 0 0N5/4.0 4 5.5 2.6 0.0 05.0 02.0 94.5 88.0 66.0 39.0 0 N5/4.0 4 5.5 2.6 2.0 6.0 2.0 04.0 97.0 72.5 43.0 0 2N5/5.5 5.5 7.5 32S.6 34.0 30.0 26.0 8.0.0 86.5 55.0 0 4N5/5.5 5.5 7.5 32S.6 57.0 5.0 47.0 38.0 30.0 0.0 64.5 0 5N5/5.5 5.5 7.5 32S 2.5 68.0 62.0 58.0 48.0 39.0 08.0 69.0 0 6N5/7.5 7.5 0 32S 2.5 79.0 73.0 69.0 58.0 48.0 5.0 73.5 0 8F5/7.5 7.5 0 32S 2.5 202.0 94.0 89.0 77.0 67.0 29.0 83.0 0 20F5/7.5 7.5 0 32S 2.5 224.0 26.0 20.0 97.0 85.0 44.0 92.0 0 22F5/ 5 60M 2.5 246.0 238.0 23.0 27.0 204.0 58.0 0.0 8 2F5/2.2 2.2 3 90L.6 32.0 3.0 30.3 28.5 25.7 2.9 7.2.6 8 3F5/3.0 3 4 00.6 48.0 46.0 45.5 43.0 38.6 32.8 25.7 7.4 8 4F5/4.0 4 5.5 2.6 64.0 6.5 60.5 57.0 5.5 44.0 34.3 23.2 8 5F5/5.5 5.5 7.5 32S.6 80.0 77.0 75.5 7.5 64.5 54.5 43.0 29.0 8 6F5/5.5 5.5 7.5 32S.6 96.0 92.0 9.0 85.5 77.0 65.5 5.5 34.8 8 7F5/7.5 7.5 0 32S 2.5 2.0 08.0 06.0 00.0 90.0 76.5 60.0 40.5 8 8F5/7.5 7.5 0 32S 2.5 28.0 23.0 2.0 4.0 03.0 84.5 68.5 46.5 8 0F5/ 5 60M 2.5 62.0 57.0 55.0 47.0 34.0 6.0 93.5 69.0 8 2F5/ 5 60M 2.5 94.0 89.0 86.0 77.0 60.0 39.0 2.0 83.0 8 4F5/5 5 20 60M 2.5 227.0 220.0 27.0 206.0 87.0 62.0 3.0 96.5 8 5F5/5 5 20 60M 2.5 243.0 236.0 233.0 22.0 20.0 74.0 4.0 04.0 8 6F5/5 5 20 60M 2.5 259.0 252.0 249.0 236.0 24.0 86.0 50.0 0.0 75

PERFORMANCE TABLE EVM 3264 50 Hz Pump Type Motor Maximum Q=Capacity EVM(.) working l/min 0 200 350 500 600 700 900 000 200 400 kw HP Size pressure m 3 /h 0 2 2 30 36 42 54 60 72 84 [Mpa] H=Total manometric head in meters 32 0F5/2.2 2.2 3 90L 22.6 20.2 7.5 3.9 0.3 5.7 32 22F5/3.0 3 4 00 39.0 34.6 29.7 2.2 4.2 32 20F5/4.0 4 5.5 2 45.0 40.5 36.0 29.5 23.2 4.9 32 33F5/5.5 5.5 7.5 32S 55.0 52.0 45.0 32.8 22.7 32 30F5/5.5 5.5 7.5 32S 68.0 6.0 54.5 45.0 36. 24. 32 43F5/7.5 7.5 0 32S 8.0 72.5 63.5 48.5 35.6 32 40F5/7.5 7.5 0 32S.6 90.5 8.5 73.0 6.0 49.0 33.3 32 53F5/ 5 60M 04.0 93.0 82.0 64.0 48.5 30.5 32 50F5/ 5 60M 3.0 02.0 9.5 76.5 62.0 42.5 32 63F5/ 5 60M 26.0 4.0 00.0 79.5 6.5 39.7 32 60F5/ 5 60M 36.0 23.0 0.0 92.0 75.0 5.5 32 73F5/5 5 20 60M 49.0 34.0 9.0 95.5 74.5 49.0 32 70F5/5 5 20 60M 58.0 43.0 28.0 08.0 87.5 6.0 32 83F5/5 5 20 60M 72.0 55.0 37.0.0 87.0 58.0 32 80F5/5 5 20 60M 8.0 64.0 47.0 23.0 0.0 70.0 32 93F5/8.5 8.5 25 60L 94.0 75.0 56.0 27.0 00.0 67.5 32 80F5/8.5 8.5 25 60L 203.0 84.0 65.0 39.0 4.0 79.5 32 03F5/8.5 8.5 25 60L 2.5 27.0 96.0 74.0 42.0 3.0 76.5 32 0F5/8.5 8.5 25 60L 223.0 202.0 80.0 5.0 22.0 84.5 32 3F5/22 22 30 80 239.0 26.0 93.0 58.0 26.0 85.5 32 0F5/22 22 30 80 249.0 225.0 202.0 70.0 39.0 97.5 32 23F5/22 22 30 80 262.0 237.0 2.0 74.0 39.0 95.0 32 2F5/22 22 30 80 268.0 243.0 27.0 82.0 48.0 03.0 32 33F5/30 30 40 200 285.0 257.0 229.0 89.0 52.0 04.0 32 30F5/30 30 40 200 3.0 294.0 266.0 239.0 202.0 65.0 6.0 32 43F5/30 30 40 200 307.0 278.0 248.0 205.0 65.0 3.0 32 40F5/30 30 40 200 36.0 287.0 257.0 27.0 78.0 25.0 45 F5/3.0 3 4 00 2.0 8.9 7.6 6.3 4.3 8.3 45 0F5/4.0 4 5.5 2 27.0 25.6 24.6 23.5 2.8 6.7 3.3 45 22F5/5.5 5.5 7.5 32S 42.0 38. 35.8 33.4 29.8 8.6 45 20F5/7.5 7.5 0 32S 54.0 5.5 50.0 48.0 45.0 35.4 29. 45 32F5/ 5 60M 69.0 64.0 6.0 58.0 53.0 37.3 45 30F5/ 5 60M.6 8.0 77.5 75.0 72.5 68.0 54.0 45.0 45 42F5/5 5 20 60M 96.0 90.0 86.0 82.0 76.0 56.0 43.0 45 40F5/5 5 20 60M 08.0 03.0 00.0 96.5 9.0 73.0 60.5 45 52F5/8.5 8.5 25 60L 23.0 6.0.0 07.0 99.0 74.5 58.5 45 52F5/8.5 8.5 25 60L 23.0 6.0.0 07.0 99.0 74.5 58.5 45 50F5/8.5 8.5 25 60L 35.0 29.0 25.0 2.0 4.0 9.5 76.5 45 6 2F5/22 22 30 80 50.0 442.0 37.0 3.0 22.0 93.5 74.5 45 60F5/22 22 30 80 62.0 55.0 5.0 46.0 37.0 0.0 92.5 45 72F5/30 30 40 200 77.0 68.0 62.0 55.0 45.0 2.0 90.5 45 70F5/30 30 40 200 89.0 8.0 76.0 70.0 60.0 29.0 08.0 45 82F5/30 30 40 200 2.5 204.0 94.0 87.0 80.0 68.0 3.0 06.0 45 80F5/30 30 40 200 26.0 207.0 20.0 94.0 83.0 48.0 24.0 45 92F5/30 30 40 200 23.0 29.0 22.0 204.0 9.0 50.0 22.0 45 90F5/37 37 50 200 243.0 233.0 226.0 29.0 206.0 66.0 40.0 45 02F5/37 37 50 200 258.0 245.0 237.0 229.0 24.0 68.0 38.0 3.0 45 00F5/37 37 50 200 270.0 259.0 25.0 243.0 229.0 85.0 56.0 64 F5/4.0 4 5.5 00 23.7 2.0 20.4 9.7 7.5 5.9.4 64 0F5/5.5 5.5 7.5 32S 29.3 26.6 26. 25.4 23.7 22.3 8.5 3.5 64 22F5/7.5 7.5 0 32S 47.5 42.5 4.5 40.5 36.5 33.5 25.3 64 2F5/ 5 60M 53.0 48.0 47.0 46.0 42.5 40.0 32.4 23.0 64 20F5/ 5 60M 58.5 53.5 53.0 52.0 49.0 46.5 39.5 30.6 64 33F5/5 5 20 60M 7.0 64.0 62.5 6.0 55.5 5.0 39.3 64 32F5/5 5 20 60M 76.5 69.5 68.0 66.5 6.5 57.5 46.5 32.5 64 3F5/5 5 20 60M 82.5 75.0 74.0 72.5 68.0 64.0 53.5 40.0 64 3F5/8.5 8.5 25 60L.6 88.0 80.5 79.5 78.0 74.0 70.5 60.5 47.5 64 43F5/8.5 8.5 25 60L 00.0 9.0 89.0 87.0 80.5 75.5 60.5 42.0 64 42F5/8.5 8.5 25 60L 06.0 96.5 95.0 93.0 87.0 8.5 67.5 49.5 64 4F5/22 22 30 80 2.0 02.0 0.0 98.5 93.0 88.0 74.5 57.0 64 40F5/22 22 30 80 7.0 08.0 06.0 04.0 99.0 94.5 8.5 64.5 64 53F5/30 30 40 200 30.0 8.0 6.0 4.0 06.0 99.5 8.5 59.0 64 52F5/30 30 40 200 35.0 24.0 22.0 9.0 2.0 06.0 88.5 66.5 64 5F5/30 30 40 200 4.0 29.0 27.0 25.0 8.0 2.0 95.5 74.0 64 50F5/30 30 40 200 47.0 35.0 33.0 3.0 24.0 9.0 03.0 8.5 64 63F5/30 30 40 200 59.0 45.0 43.0 40.0 3.0 24.0 03.0 76.0 64 62F5/30 30 40 200 65.0 5.0 48.0 46.0 37.0 30.0 0.0 83.5 64 6F5/37 37 50 200 70.0 56.0 54.0 5.0 43.0 36.0 7.0 9.0 64 60F5/37 37 50 200 2.5 76.0 62.0 60.0 57.0 49.0 43.0 24.0 99.0 64 73F5/37 37 50 200 88.0 72.0 69.0 66.0 56.0 48.0 24.0 93.0 64 72F5/37 37 50 200 94.0 78.0 75.0 72.0 62.0 54.0 3.0 0.0 64 7F5/37 37 50 200 200.0 83.0 8.0 78.0 68.0 6.0 38.0 08.0 76

PERFORMANCE CURVE EVM 3 2900 min EVM 3 EVM 3 EVM 3 EVM 3 77

PERFORMANCE CURVE EVM 5 2900 min EVM 5 EVM 5 EVM 5 EVM 5 78

PERFORMANCE CURVE EVM 50 2900 min EVM 5 EVM 0 EVM 0 EVM 0 79

PERFORMANCE CURVE EVM 08 2900 min EVM 0 EVM 8 EVM 8 EVM 8 80

PERFORMANCE CURVE EVM 832 2900 min EVM 8 EVM 32 EVM 32 EVM 32 8

PERFORMANCE CURVE EVM 32 2900 min EVM 32 EVM 32 EVM 32 EVM 32 82

PERFORMANCE CURVE EVM 45 2900 min EVM 45 EVM 45 EVM 45 EVM 45 83

PERFORMANCE CURVE EVM 4564 2900 min EVM 45 EVM 64 EVM 64 EVM 64 84

PERFORMANCE CURVE EVM 64 2900 min EVM 64 EVM 64 EVM 64 EVM 64 85

DIMENSION EVM(.) 38 86

DIMENSION EVM(.) 3 8 87

DIMENSION EVM(.) 32 64 88

DIMENSION EVM(.) 32 89

DIMENSION EVM(.) 45 90

DIMENSIONS EVM(.) 64 9