No: En Revision Parts List. Matador O-RING KIT BASIC REPAIR KIT B_8106_180_expl_view

No: 897386 En Revision 9.0 0 0 Parts List Matador 806.80 www.grindex.com O-RING KIT 80 BASIC REPAIR KIT 90 90 0086B_806_80_expl_view

Parts List Matador 806.80 Overview Table of Contents This publication contains the following topics: Topic Introduction... 4 Practical Information... 5 Data Plate Interpretation... 6 Order parts... 7 Spare Parts... 8 Parts List, Matador 806.80 3

Introduction Purpose The purpose of this manual is to give the reader information about available spare parts and accessories for the product. Recipient The manual is principally intended for Grindex customers service personnel sales personnel Contact For more information contact your Grindex representative visit http://www.grindex.com/ Reference More information about the product is available in the following documents: Installation, Operation and Maintenance Grindex accessories list 4 Parts List, Matador 806.80

Practical Information Overview Table of Contents This chapter contains the following topics: Topic Data Plate Interpretation... 6 Data Plate... 6 Order parts... 7 Parts List, Matador 806.80 5

Data Plate Interpretation Introduction The Grindex product is always provided with data plates: The general data plate is used on all products. The approval plate is added to all explosion proof products. Data Plate The product may only be operated within the parameters stated on the data plate. Illustration This is an illustration of a general data plate. Field description This table shows the fields on the general data plate, and which information each field contains. Field Description Field Description Pump type number Degree of protection Frequency Maximum capacity 3 Phases, type of current 3 Rated current 4 Rated shaft power 4 Direction of the start reaction 5 Thermal class 5 Direction of the impeller rotation 6 Locked rotor code-letter 6 Maximum head 7 Country of origin 7 Serial number 8 Maximum power consumption 8 Rated voltage 9 Product weight 9 Pump model 0 Maximum submersion depth - - 6 Parts List, Matador 806.80

Order parts Order When ordering spare parts, state product number and serial number of the product, spare part number and quantity. Requirements Genuine Grindex parts must always be used for repairs if the product is to fulfill requirements and obtain official approval. Specially Approved Products Spare parts marked with (EX) after the part number are subject to dimensional accuracy inspection. Parts List, Matador 806.80 7

Spare Parts NOTE! Parts with position numbers that end with.9xx are NOT included in the unit and must be ordered separately. Pos. No Part. No Denomination 40 0 Hexagon nut M-A4-70 4 3 44 Plain washer -A-70 4 4 50 897 00 U-ring 5 40 7 Stud MX35-A-70 4 6 40 97 Hexagon head screw MX35-A-70 7 3 44 Plain washer -A-70 9 5 033 04 Entrance flange 0 3 3 Plain washer (33)-35 MM 4 0 3 334 Plain washer (4)-0 MM 4 0 3 336 Plain washer (0)-3 MM 4 40 Seal sleeve (4)-7 MM 40 3 Seal sleeve (7)-0 MM 40 4 Seal sleeve (0)-3 MM 40 5 Seal sleeve (3)-6 MM 40 6 Seal sleeve (6)-9 MM 40 8 Seal sleeve (3)-35 MM 5 05 0 Ring 3 40 086 O-ring 49.5X3 NBR 4 50 865 00 Cover 5 50 869 00 Air release valve 40 06 Hex.socket hd screw M6X-A4-70 4 50 0 33 Hex.socket hd screw M8X0-A4-80 5 50 994 00 Cover 6 3 4 O-ring 9.3X5.7 NBR 7 40 06 Hex.socket hd screw M6X-A4-70 8 50 90 00 Earthing plate 9 40 076 Hexagon flange screw M0X45-A4-80 30 50 037 34 O-ring 0.3X.4 NBR 6 3 50 866 00 Handle compl. 3 50 0 7 Hex.socket hd screw M0X5-A4-70 33 50 888 00 Plate-blank Use 50 907 00 (EU), 50 907 0 (US) as spare part. 80 8 4 6 8 8 Parts List, Matador 806.80

Pos. No Part. No Denomination 34 40 000 Drive screw 4X5-A-70 4 35 5 04 00 El.lead through unit Only for Y/D. 36 40 0 O-ring 75X3 NBR 37 5 03 00 Stator housing 38 5 059 00 Seal ring 39 50 867 00 Cooling jacket 4 5 007 0 Stator -8-b 50Hz: 400V-45V D, 690V Y. 60Hz: 460V D. 4 5 007 0 Stator -8-b 50Hz: 0V-30V D, 400V Y. 4 5 007 03 Stator -8-b 50Hz: 500V D. 60Hz: 575V-600V D. 4 5 007 04 Stator -8-b 60Hz: 440V-460V YSER, 0V-30V Y//. 4 5 007 05 Stator -8-b 50Hz: 000V Y, 550V D. 4 5 007 06 Stator -8-b 60Hz: 0V-40V D. 4 5 007 07 Stator -8-b 50Hz: 660V Y, 380V D. 60Hz: 440V D. 4 5 007 08 Stator -8-b 60Hz: 00V-08V D. 4 5 007 0 Stator -8-b 60Hz: 380V-400V D. 4 5 007 Stator -8-b 60Hz: 30V D//, 380V Y//, 460V DSER. 4 40 080 Spring washer 7.5X59X0.55 43 40 084 O-ring 7.X3 FPM 44 40 00 Ball bearing 3306A- Z/C3VT3 45 5 09 03 Shaft unit 46 5 03 00 Bearing holder 47 5 04 00 Hexagon head screw 48 40 079 Supporting washer 40X50X.5-SPRING STEEL 49 40 0 Ball bearing 3308A- Z/C3VT3 50 40 08 Retaining ring SGA 40 5 40 093 Retaining ring JB 90 5 40 0 O-ring 75X3 NBR 53 5 037 00 Spring ring, solid 54 40 09 O-ring 09.3X5.7 NBR 55 33 063 Inspection screw 4 56 33 064 O-ring 9.X3 NBR 4 57 5 039 0 Adapter 58 50 037 34 O-ring 0.3X.4 NBR 6 59 40 076 Hexagon flange screw M0X45-A4-80 80 6 Parts List, Matador 806.80 9

Pos. No Part. No Denomination 60 50 037 3 O-ring 359.3X5.7 NBR 6 5 08 Mechanical seal 63 40 06 Pressure equalizer 64 40 085 O-ring 46.0X4.0 NBR 65 40 097 O-ring 84.4X4 FPM 66 40 096 O-ring.6X.9 FPM 67 5 043 00 Seal housing cov.coa 68 50 0 8 Hex.socket hd screw M8X30-A4-70 69 33 060 Protective plug 70 5 035 0 Sleeve 7 5 036 00 Adjustment screw 7 5 03 50 Impeller 50Hz, H 7 5 03 5 Impeller 60Hz, H 7 5 04 50 Impeller 50Hz, N 7 5 04 5 Impeller 60Hz, N 73 3 44 Plain washer -A-70 74 40 074 Hexagon head screw MX80-A4-80 75 5 08 00 Diffuser coat. H 75 5 09 00 Diffuser coat. N 76 3 44 Plain washer -A-70 4 77 40 075 Hexagon head screw MX0-A-7O 78 3 34 O-ring 89.3X5.7 NBR N 78 3 4 O-ring 9.3X5.7 NBR H 79 5 040 00 Suction cover H 79 5 04 00 Suction cover N 80 3 44 Plain washer -A-70 4 8 40 97 Hexagon head screw MX35-A-70 8 5 045 00 Damper complete 4 83 5 044 0 Strainer 84 40 0 Hexagon nut M-A4-70 4 85 50 037 7 O-ring 60.0X4.0 NBR 86 40 757 Hex.socket hd screw M6X35-A-70 87 33 5 O-ring 6.X.6 NBR 303 5 643 00 Terminal plate unit 37 50 993 47 CONTACTOR UNIT 50Hz: 0V 40V D. Only for DOL, Softstarter. 80 4 4 0 Parts List, Matador 806.80

Pos. No Part. No Denomination 37. 40 008 Hex.socket hd screw M4X6-A-70 37. 40 0 Lock nut 37. 50 00 07 Lock nut M6-A4-70 37.3 50 00 04 Hex.socket hd screw M6X0-A4-70 37.4 50 00 04 Hex.socket hd screw M6X0-A4-70 37.5 40 749 Overload relay 37.6 40 76 Contactor 37.7 50 900 6 Single-core cable 37.7 5 076 00 Cable set 37.8 50 995 0 Holder 37.8 5 644 00 Holder 37.9 5 5 07 Motor protector SMART 37.90 5 65 00 Connection plate Ordered separately. 39 50 993 47 CONTACTOR UNIT 50Hz: 0V - 30V D. 39. 40 008 Hex.socket hd screw M4X6-A-70 39. 40 0 Lock nut 39. 50 00 07 Lock nut M6-A4-70 39.3 50 00 04 Hex.socket hd screw M6X0-A4-70 39.4 50 00 04 Hex.socket hd screw M6X0-A4-70 39.5 40 749 Overload relay 39.6 40 76 Contactor 39.7 50 900 6 Single-core cable 39.7 5 076 00 Cable set 39.8 50 995 0 Holder 39.8 5 644 00 Holder 39.9 5 5 07 Motor protector SMART 39.90 5 65 00 Connection plate Ordered separately. 30 50 993 48 CONTACTOR UNIT 50Hz: 380V - 400V D. 30. 40 008 Hex.socket hd screw M4X6-A-70 30. 40 008 Hex.socket hd screw M4X6-A-70 30.3 40 0 Lock nut 30.4 40 0 Lock nut 30.5 40 8 Overload relay 30.6 40 86 Contactor 80 Parts List, Matador 806.80

Pos. No Part. No Denomination 30.7 50 900 6 Single-core cable 30.7 5 076 00 Cable set 30.8 50 995 00 Holder 30.9 5 5 05 Motor protector SMART 30.90 5 65 00 Connection plate Ordered separately. 30.948 5 639 0 Cable set Ordered separately. 3 50 993 48 CONTACTOR UNIT 50Hz: 45V - 440V D. 3. 40 008 Hex.socket hd screw M4X6-A-70 3. 40 008 Hex.socket hd screw M4X6-A-70 3.3 40 0 Lock nut 3.4 40 0 Lock nut 3.5 40 8 Overload relay 3.6 40 86 Contactor 3.7 50 900 6 Single-core cable 3.7 5 076 00 Cable set 3.8 50 995 00 Holder 3.9 5 5 05 Motor protector SMART 3.90 5 65 00 Connection plate Ordered separately. 3.948 5 639 0 Cable set Ordered separately. 3 50 993 50 CONTACTOR UNIT 50Hz: 500V D. 3. 40 008 Hex.socket hd screw M4X6-A-70 3. 40 008 Hex.socket hd screw M4X6-A-70 3.3 40 0 Lock nut 3.4 40 0 Lock nut 3.5 40 466 Overload relay 3.6 40 756 Contactor 3.7 50 900 6 Single-core cable 3.7 5 076 00 Cable set 3.8 50 995 00 Holder 3.9 5 5 05 Motor protector SMART 3.90 5 65 00 Connection plate Ordered separately. 3.948 5 639 0 Cable set Ordered separately. 35 50 999 0 CONTACTOR UNIT 50Hz: 380V 400V Y/D. 35. 40 008 Hex.socket hd screw M4X6-A-70 35. 40 0 Lock nut 8 35.3 40 46 Contactor 3 80 8 Parts List, Matador 806.80

Pos. No Part. No Denomination 35.4 40 088 Holder 35.4 50 998 00 Holder 35.4 5 030 00 Rail 35.5 40 0 Overload relay 35.6 05 839 Cable tie 35.7 50 48 0 Time relay 35.8 50 509 00 Cable set 35.8 5 00 0 Cable set 35.9 5 5 05 Motor protector SMART 35.909 5 00 03 Connection plate Ordered separately. 35.980 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 330 50 999 03 CONTACTOR UNIT 60Hz: 460V Y/D. 330. 40 008 Hex.socket hd screw M4X6-A-70 330. 40 0 Lock nut 8 330.3 40 088 Holder 330.3 50 998 00 Holder 330.3 5 030 00 Rail 330.4 40 0 Overload relay 330.5 05 839 Cable tie 330.6 50 48 0 Time relay 330.7 40 38 Contactor 3 330.8 50 509 00 Cable set 330.8 5 00 0 Cable set 330.9 5 5 06 Motor protector SMART 330.909 5 00 03 Connection plate Ordered separately. 330.980 40 74 Flat pin sleeve 0,5-,65MM Ordered separately. 334 50 993 5 CONTACTOR UNIT 60Hz: 30V - 40V D. 334. 40 008 Hex.socket hd screw M4X6-A-70 334. 40 0 Lock nut 334. 50 00 07 Lock nut M6-A4-70 334.3 50 00 04 Hex.socket hd screw M6X0-A4-70 334.4 50 00 04 Hex.socket hd screw M6X0-A4-70 334.5 40 750 Overload relay 334.6 40 76 Contactor 334.7 50 900 6 Single-core cable 334.7 5 076 00 Cable set 334.8 50 995 0 Holder 80 8 Parts List, Matador 806.80 3

Pos. No Part. No Denomination 334.8 5 644 00 Holder 334.9 5 5 08 Motor protector SMART 334.90 5 65 00 Connection plate Ordered separately. 334.948 5 639 0 Cable set Ordered separately. 335 50 993 5 CONTACTOR UNIT 60Hz: 380V - 400V D. 335. 40 008 Hex.socket hd screw M4X6-A-70 335. 40 008 Hex.socket hd screw M4X6-A-70 335.3 40 0 Lock nut 335.4 40 0 Lock nut 335.5 40 83 Overload relay 335.6 40 86 Contactor 335.7 50 900 6 Single-core cable 335.7 5 076 00 Cable set 335.8 50 995 00 Holder 335.9 5 5 06 Motor protector SMART 335.90 5 65 00 Connection plate Ordered separately. 335.948 5 639 0 Cable set Ordered separately. 337 50 993 37 CONTACTOR UNIT 60Hz: 440V - 480V D. 337. 40 008 Hex.socket hd screw M4X6-A-70 337. 40 0 Lock nut 4 337.4 40 8 Overload relay 337.5 40 86 Contactor 337.6 50 900 6 Single-core cable 337.7 50 995 00 Holder 337.8 5 076 00 Cable set 337.9 5 5 06 Motor protector SMART 337.90 5 65 00 Connection plate Ordered separately. 337.948 5 639 0 Cable set Ordered separately. 338 50 993 46 CONTACTOR UNIT 60Hz: 575V - 600V D. 338. 40 008 Hex.socket hd screw M4X6-A-70 338. 40 008 Hex.socket hd screw M4X6-A-70 338.3 40 0 Lock nut 338.4 40 0 Lock nut 338.5 40 466 Overload relay 338.6 40 756 Contactor 338.7 50 900 6 Single-core cable 80 4 4 Parts List, Matador 806.80

Pos. No Part. No Denomination 338.7 5 076 00 Cable set 338.8 50 995 00 Holder 338.9 5 5 06 Motor protector SMART 338.90 5 65 00 Connection plate Ordered separately. 338.948 5 639 0 Cable set Ordered separately. 340 50 993 5 CONTACTOR UNIT 60Hz: 380V - 400V D. Not CSA approved. 340. 40 008 Hex.socket hd screw M4X6-A-70 340. 40 008 Hex.socket hd screw M4X6-A-70 340.3 40 0 Lock nut 340.4 40 0 Lock nut 340.5 40 83 Overload relay 340.6 40 86 Contactor 340.7 50 900 6 Single-core cable 340.7 5 076 00 Cable set 340.8 50 995 00 Holder 340.9 5 5 06 Motor protector SMART 340.90 5 65 00 Connection plate Ordered separately. 340.948 5 639 0 Cable set Ordered separately. 34 50 993 37 CONTACTOR UNIT 60Hz: 440V - 480V YSER. 34. 40 008 Hex.socket hdscrew M4X6-A-70 34. 40 0 Lock nut 4 34.4 40 8 Overload relay 34.5 40 86 Contactor 34.6 50 900 6 Single-core cable 34.7 50 995 00 Holder 34.8 5 076 00 Cable set 34.9 5 5 06 Motor protector SMART 34.90 5 65 00 Connection plate Ordered separately. 34.948 5 639 0 Cable set Ordered separately. 34.960 40 033 Closed end splice 5.-0.6;(AWG 8-8) L=38 Ordered separately. 3 363 5 38 03 Softstarter 363.0 5 356 00 Softstarter STARTER ONLY 505 50 777 00 Motor cable 4G.5+X.5 MM OD=7-8 507 33 39 Motor cable 4G4 MM OD=6-7 MM 80 4 Parts List, Matador 806.80 5

Pos. No Part. No Denomination 508 40 9 Motor cable 4G4+X.5 MM OD=0- MM 509 40 30 Motor cable 7G4+X.5 MM OD=-6 MM 50 3 08 Motor cable 4G6 MM OD=8-9MM 5 40 6 Motor cable 4G6+X.5 MM OD=3-5 MM 5 40 3 Motor cable 7G6+X.5 MM OD=4-8 MM 53 3 07 Motor cable 4G0 MM OD=3-5.5MM 54 40 7 Motor cable 4G0+X.5 MM OD=6-8MM 55 3 06 Motor cable 4G6 MM OD=6-8MM 56 40 8 Motor cable 4G6+X.5 MM OD=6-8MM 56.993 50 0 End sleeve.5 MM; L=7 MM Ordered separately. 56 40 3 Motor cable 0AWG/4 OD=8-9.7 MM 57 40 069 Motor cable 0AWG/3---GC OD=0-MM 58 40 33 Motor cable 8AWG/4 OD=4-6MM 59 40 34 Motor cable 8AWG/3---GC OD=7-9 MM 53 40 36 Motor cable 4AWG/3---GC OD=33-35 MM 53.990 50 03 End sleeve 4MM; L=0MM Ordered separately. 3 53.99 50 07 End sleeve5mm;l=5mm Ordered separately. 3 53.99 50 05 End sleeve 0 MM; L= MM Ordered separately. 540 40 060 Motor cable SCREEN 6X.5MM OD=8-0 540.950 40 054 Shrink hose ID 6.4 Ordered separately. 54 40 06 Motor cable SCREEN 3X.5+3X.5 9-0 54.950 40 054 Shrink hose ID 6.4 Ordered separately. 54.96 40 034 Closed end splice 3-6(AWG -0) L=8 543 40 4 Motor cable SCREEN 3X6+3X6 OD=0-3MM Ordered separately. 543.950 40 054 Shrink hose ID 6.4 Ordered separately. 543.96 40 034 Closed end splice 3-6(AWG -0) L=8 Ordered separately. 80 6 Parts List, Matador 806.80

Pos. No Part. No Denomination 544 40 5 Motor cable SCREEN 3X0+3X0 OD=3-6 544.95 40 Shrink hose ID 9.5 Ordered separately. 544.96 40 034 Closed end splice 3-6(AWG -0) L=8 64 50 99 00 Discharge connection DN 00 HOSE 4" 643 50 99 0 Discharge connection ISO G4" OUTER 643.970 40 09 Coupling part DN 00 G4" INNER STORZ 646 50 99 03 Discharge connection VICTUALIC 4" 648 50 99 0 Discharge connection DN 00 NPT 4-8 OUTER 66 5 038 05 Discharge connection DN 50 HOSE 6" 663 5 038 06 Discharge connection ISO G6" OUTER 663.97 40 099 Coupling part DN 50 G6 INNER STORZ 666 5 038 09 Discharge connection VICTUALIC 6" 668 5 038 08 Discharge connection DN 50 NPT 6-8 OUTER Ordered separately. Ordered separately. Ordered separately. 800 5 069 00 O-ring kits Contains all position numbered O-rings. 80 5 08 00 Zinc anode set 900 5 075 00 Basic repair kit 900. 40 00 Ball bearing 3306A- Z/C3VT3 900. 40 0 Ball bearing 3308A- Z/C3VT3 900.3 40 06 Pressure equalizer 900.4 5 08 Mechanical seal 900.5 5 069 00 O-ring kits Contains all position numbered O-rings. 90 3 95 Plug contact 380-45V 3-PH 63A CEE 5P 90 40 685 Plug contact 380-45V 3-PH 3A CEE 4P 90 50 0 0 Phase shifter 0-575V 0-48A 90 5 5 0 Adapter unit H 90 5 5 03 Adapter unit WITH EXTENDER N Quantity per meter 80 Parts List, Matador 806.80 7

Grindex AB Box 705 SE-74 07 Sundbyberg Sweden Tel +46 8 606 66 00 Fax +46 8 745 53 8 marketing@grindex.com Grindex AB. The original instruction is in English. All non-english instructions are translations of the original instruction.