Miniature Rugged Connector Series

Miniature Rugged Connector Series

Miniature Rugged Connector Series Intended for harsh environment applications and used extensively in soldier communications, Amphenol Terrapin is a miniature series of circular push-pull connectors. Within a rugged shell design Terrapin offers superior EMC performance and high environmental sealing to IP68. Resilient in severe battlefield situations the RoHS compliant black-silver plating is both low-lustre and corrosion resistant. Featuring an optional locking mechanism, multiple shell sizes with up to 37 contacts and suitability for overmoulding, Terrapin is the preferred choice for miniature connectors in military and other harsh environment applications. Terrapin shells are machined from brass giving an increased number of mating cycles and higher degree of robustness over traditional aluminium connectors. Five different keying options are available to prevent mis-mating; N, A, B, C and D. Standard plating is non-reflective black-silver, alternative plating finishes are available upon request. Terrapin is available in two different styles of mating; either Snatch, being a break-away connector with no moving parts, or Latch, which has an additional coupling ring allowing connections to be locked together. The same plug can be mated to either snatch or latch receptacles. Both styles of product are waterproof to IP68 in both their mated and unmated conditions. connectors can be terminated with screen retention straps and heatshrink boots giving full 360 screening. The customised design specification of Terrapin lends itself to a variety of applications. Originally designed for soldier mounted applications such as Radios, Headsets and GPS units, Terrapin is also suitable for Gigabit Ethernet and USB 2.0 and therefore widely used on Computer Systems, LAN Switches and Routers. The high degree of sealing offered by Terrapin makes it perfect for Unmanned Ground Sensors and Surveillance equipment. Whatever the application, Terrapin offers space savings and improved durability over traditional interconnect products. Amphenol offer a full range of cable harness solutions with standard or customised overmoulding. Alternatively, for field termination, both integral and threaded backshell 2 TERRAPIN SERIES

Contents Terrapin terminology................................................... 4 Terrapin mating options................................................ 4 Terrapin PART NUMBERING............................................ 5 Terrapin performance information........................................ 6 Terrapin insert availability.............................................. 7 NEW High Density Terrapin............................................. 8 NEW Aluminium Terrapin 50% Lighter................................... 9 NEW Micro-USB Terrapin.............................................. 10 Contents Plugs Table of styles....................................................... 11 76A Rear Mount Jam Nut Plug.......................................... 12 67A Front Mount Jam Nut Plug.......................................... 13 06K Inline Plug Integral Backshell........................................ 14 06T Inline Plug Threaded Backshell...................................... 15 76T Rear Mount Jam Nut Plug, Screw On Backshell......................... 16 Receptacles Table of styles........................................................ 17 01K Inline Receptacle, Integral Backshell.................................. 18 L1K Inline Latching Receptacle, Integral Backshell.......................... 19 01T Inline Receptacle, Threaded Backshell................................ 20 L1T Inline Latching Receptacle, Threaded Backshell......................... 21 07A Rear Mount Jam Nut Receptacle..................................... 22 71A Front Mount Receptacle, Threaded................................... 23 Accessories Cap assembly part numbering.......................................... 24 390-5056 Metal Dust Cap Assembly for Receptacles......................... 25 390-5057 Metal Dust Cap Assembly for Plugs.............................. 26 390-5063 Rubber Dust Cap Assembly for Receptacles....................... 27 390-5064 Rubber Dust Cap Assembly for Plugs............................ 28 Overmoulded cable harnesses.......................................... 29 NEW Hermetic Sealing and EMI Filtering.................................. 30 TERRAPIN SERIES 3

Terrapin terminology and mating options Terrapin terminology L1T L1K 01K Body Backshell Crimp ferrule Coupling ring Integral backshell Integral backshell for direct screen termination Terrapin mating options Chassis Mount Plug SCE2-B-76A Snatch Inline Receptacle SCE2-B-01K The same chassis mount plug will mate with both snatch and latch receptacles Latch Inline Receptacle SCE2-B-L1K 4 TERRAPIN SERIES

Terrapin part numbering Example: SCE2 B 76A06 07SN 002 (985) for optional grounding spring in L1K and L1T (981) castellated panel nut SCE2 B XXX XX XX X X XXX Series identifier Plating finish B = Brass with Black Silver (RoHs) ZN = Aluminium with Black Zinc Nickel (RoHs) Style Plugs 76A 67A 06K 06T 76T Receptacles 01K L1K 01T L1T 07A 71A Shell size and number of contacts 06-07 07-10A 07-12 07-14 08-19 09-26 10-37 High Density: 06-09 07-19 (See page 7) Contact style P = Pins S = Sockets Key orientation N = Normal A B C D (See diagrams below) Variant code 001 PC Tails 002 Solder Buckets 003 Backshell Terrapin part numbering Terrapin plug and receptacle keyway orientation Keyway orientation letter PLUG keyway orientation RECEPTACLE keyway orientation N A B C D TERRAPIN SERIES 5

Terrapin performance information Terrapin performance information Test/parameter Electrical Current Rating Shell to Shell Continuity Contact Resistance Insulation Resistance Working Voltage Dielectric Withstanding Voltage Description 28 AWG contacts: 1.5A d.c. 23 AWG contacts: 3A d.c. 20 AWG contacts: 7.5A d.c. 10mΩ max (screened) 5mΩ initial 10mΩ maximum 1000MΩ minimum, production tested to 500MΩ* AC (RMS) 400V contact dependant 2mA maximum leakage Technical Mating Durability Backshell Recommended Torque Panel Nut Recommended Torque Non-magnetic 2000+ cycles 19.914 lb.f.in / 2.25Nm 19.914 lb.f.in / 2.25Nm Yes Environmental Operating Temperature Range Temperature Endurance Sealing (mated and unmated) Air Leakage Salt Spray Altitude Immersion RoHS Compliant Suitable for RoHS compliant Soldering -55 C to +125 C 250 hours +125 C IP68, 1 hour at 2 metres* Less than 1cc per hour 1000 hours 70,000 Feet Yes Yes *Consult the factory if greater rating is required 6 TERRAPIN SERIES

Terrapin insert availability View shown for reference / View from rear of plug* Shell size 06 07 08 09 10 06 07 07 10A 08 19 09 26 10 37 1 3 2 6 15 11 4 9 12 Terrapin insert availability 18 16 23 25 26 24 21 06 09 07 12 07 14 23AWG contacts 20AWG contacts 28 AWG contacts 07 19 *View from rear of receptacle is mirror image of above. TERRAPIN SERIES 7

NEW High Density Terrapin High Density Terrapin Key Features Higher density planform arrangements Reduced contact pitch Contact size reduced from 23AWG to 28AWG Up to 1.5A d.c. Two HD planform options; #06-09 or #07-19 giving two extra contacts in shell size #06 and five extra contacts in a shell size #07 Ideal for low current applications with footprint constraints Two new high density planforms of Terrapin connector have been designed specifically to carry more signals in a smaller package than ever before. Both the shell size #06 and #07 Terrapin connectors are now offered with a fully populated high density insert. The new higher density inserts feature a smaller 28AWG contact compared to the standard 23AWG contacts used throughout the standard product range. The shell size #06 Terrapin shell, previously housing seven size 23AWG contacts is now available with nine size 28AWG contacts and the shell size #07 Terrapin shell, previously having a maximum of fourteen size 23AWG contacts is now available with 19 contacts. The High Density (HD) Terrapin connectors enable additional data lines compared to the standard product and so are perfect for those applications where space is at a premium. The new HD Terrapin connectors are some of the first to be built using the latest robotic equipment purchased by Amphenol Ltd in response to increasing customer demand. 06-09 07-19 How to order Simply choose 06-09 or 07-19 planform arrangement from page 7 e.g. SCE2-B-76A06-09SN-001 8 TERRAPIN SERIES

NEW Aluminium Terrapin 50% Lighter Key Features Weight reduction Up to 50% lighter Aluminium Shell RoHS Black Zinc Nickel Plating Temperature range 55 C to +125 C IP68 sealing as standard 500hrs salt spray Ideal for handheld equipment or weight critical applications Aluminium Terrapin Amphenol s Terrapin connector series is now available in a new lightweight Aluminium option. Terrapin connectors have long been used in military communications equipment so this new extension to the product range is perfectly suited not only to weight critical soldier system applications but also industrial applications such as hand-held instrumentation. The entire Terrapin product range is now available in this new lightweight Aluminium shell material and finished in the latest RoHS compliant, Cadmium Free, Black Zinc Nickel plating finish. Typical weight savings are as much as 50% compared to standard Terrapin connectors made from Brass. All popular performance features and high specifications of the original Terrapin product range have been retained, i.e. IP68 sealing in mated and unmated conditions, planforms up to 37 contacts, integral backshell for low cost overmoulding and of course the unique mating mechanism which allows the same plug to mate with either break-away or locking receptacles. The new Lightweight Terrapin is fully intermateable and backwards compatible with original Terrapin connectors. Aluminium Black Zinc Nickel Brass Black Silver How to order Simply replace B in connector part number with ZN e.g. SCE2-ZN-76A06-07SN-001 TERRAPIN SERIES 9

NEW Micro-USB Terrapin Micro-USB Terrapin Key Features Industry standard Micro-USB interface High Speed USB 2.0 specification Backshell for strain-relief and screen termination Miniature footprint <16mmØ Intermateable with standard COTS Micro-USB plugs Ideal for ruggedisation of devices utilising the USB 2.0 protocol Amphenol s Terrapin connector series is now offered with a Micro-USB interface designed especially for harsh environment communication systems. This new product development combines the benefits of a rugged and IP68 sealed connector with the recognised technology of Micro-USB. Micro-USB technology, widely used on equipments such as PDAs and Smartphones, provides total mobile interconnectivity by enabling portable devices to communicate directly with each other without the need for a host computer. By incorporating Micro-USB technology into the renowned Terrapin connector Amphenol Ltd can offer advantages of increased durability and reliability for USB data transmission in harsh environment applications. The shell design of the Terrapin Series ensures blind mating of receptacle to plug and IP68 sealing in both mated and un-mated conditions. Available in various RoHS compliant plating finishes Terrapin Micro-USB connectors are suitable for both military and industrial applications. Jam nut style connectors are available with either a Micro-B plug or Micro-AB receptacle insert and feature a grounding post on the shell for screening as well as a PCB board for termination. Mating cable-mount connectors in either latch or break-away styles are available either as individual connectors or as pre-terminated overmoulded cable assemblies. How to order Request CPD drawings from factory for part numbers beginning SCE2USB... 10 TERRAPIN SERIES

Plugs table of styles SCE2-X-76A Page 12 Plugs table of styles SCE2-X-67A Page 13 SCE2-X-06K Page 14 SCE2-X-06T Page 15 SCE2-X-76T Page 16 TERRAPIN SERIES 11

Plug SCE2-X-76AXX-XXSX-XXX Rear Mount Jam Nut Plug Plug (-001) Shell Size ØF ØH K L M N P S A/F T Max Size 06.550 (13.97).550 (13.97).716 (18.19).655 (16.64).055 (1.40).155 (3.94).170 (4.32).470 (11.94).118 (3.00) Size 07.620 (15.75).600 (15.24).716 (18.19).655 (16.64).055 (1.40).155 (3.94).170 (4.32).510 (12.95).118 (3.00) Size 08.760 (19.30).760 (19.30).716 (18.19).655 (16.64).055 (1.40).155 (3.94).170 (4.32).706 (17.93).118 (3.00) Size 09.890 (22.61).830 (21.08).802 (20.37).725 (18.42)..114 (2.90).069 (1.75).234 (5.94).745 (18.92).125 (3.18) Size 10.930 (23.62).900 (22.86).802 (20.37).725 (18.42)..114 (2.90).069 (1.75).234 (5.94).808 (20.52).125 (3.18) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 12 TERRAPIN SERIES

Plug SCE2-X-67AXX-XXSX-XXX Front Mount Jam Nut Plug Plug Shell Size ØF ØH L M N P S A/F T Max Size 06.590 (14.99).590 (14.99).592 (15.04).324 (8.23).279 (7.09).424 (10.78).525 (13.34).100 (2.54) Size 07.750 (19.05).750 (19.05).592 (15.04).324 (8.23).279 (7.09).444 (11.27).665 (16.89).100(2.54) Size 08.760 (19.30).760 (19.30).592 (15.04).324 (8.23).279 (7.09).444 (11.27).706 (17.93).100 (2.54) Size 09.890 (22.61).890 (22.61).662 (16.82).254 (6.45).209 (5.31).354 (8.99).955 (24.26).100 (2.54) Size 10.930 (23.62).930 (23.62).662 (16.82).254 (6.45).209 (5.31).354 (8.99).995 (25.27).100 (2.54) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 13

Plug SCE2-X-06KXX-XXSX Inline Plug Integral Backshell Plug Shell Size ØF ØH ØJ K L M T Size 06.495 (12.57).412 (10.46).440 (11.18).862 (21.89).300 (7.62).250 (6.35).100 (2.54) Size 07.575 (14.61).460 (11.68).505 (12.83).862 (21.89).300 (7.62).250 (6.35).100 (2.54) Size 08.650 (16.51).593 (15.06).620 (15.75).862 (21.89).300 (7.62).250 (6.35).100 (2.54) Size 09.720 (18.23).663 (16.84).690 (17.53).932 (23.67).317 (8.05).267 (6.78).100 (2.54) Size 10.790 (20.06).733 (18.61).760 (19.30).932 (23.67).317 (8.05).267 (6.78).100 (2.54) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 14 TERRAPIN SERIES

Plug SCE2-X-06TXX-XXSX-003 Inline Plug Threaded Backshell Plug Backshell ID Shell Size ØF K L T -003 Size 06.550 (13.97) 1.292 (32.82).451 (11.46).141 (3.58).185 (4.70) Size 07.630 (16.00) 1.292 (32.82).451 (11.46).141 (3.58).265 (6.73) Size 08.705 (17.91) 1.292 (32.82).451 (11.46).141 (3.58).345 (8.76) Size 09.780 (19.81) 1.362 (34.60).521 (13.23).141 (3.58).425 (10.80) Size 10.855 (21.72) 1.362 (34.60).521 (13.23).141 (3.58).505 (12.83) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 15

Plug SCE2-X-76TXX-XXSX-002 Rear Mount Jam Nut Plug (Screw On Backshell) Plug Shell Size ØH ØJ K L M S A/F T Max Size 06.460 (11.68).490 (12.45) 1.150 (29.21).655 (16.64).330 (8.38).470 (11.94).118 (3.00) Size 07.519 (13.18).560 (14.21) 1.150 (29.21).655 (16.64).330 (8.38). 510 (12.95).118 (3.00) Size 08.700 (17.78).730 (18.53) 1.150 (29.21).655 (16.64).330 (8.38).706 (17.93).118 (3.00) Size 09.752 (19.10).793 (20.13) 1.237 (31.40).725 (18.42).330 (8.38).745 (18.92).125 (3.18) Size 10.860 (21.84).900 (22.86) 1.220 (30.99).725 (18.42).330 (8.38).808 (20.52).125 (3.18) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 16 TERRAPIN SERIES

Receptacles table of styles SCE2-X-01K Page 18 Receptacle SCE2-X-L1K Page 19 SCE2-X-01T Page 20 SCE2-X-L1T Page 21 SCE2-X-07A Page 22 SCE2-X-71A Page 23 TERRAPIN SERIES 17

Receptacle SCE2-X-01KXX-XXPX Inline Receptacle, Integral Backshell Receptacle Shell Size ØF ØH ØJ K L M N Size 06.462 (11.73).399 (10.13).440 (11.18).900 (22.86).525 (13.34).330 (8.38).090 (2.29) Size 07.575 (14.61).460 (11.68).505 (12.83).900 (22.86).525 (13.34).330 (8.38).090 (2.29) Size 08.620(15.75).581 (14.76).620 (15.75).900 (22.86).525 (13.34).330 (8.38).090 (2.29) Size 09.690 (17.51).651 (16.54).690 (17.53).970 (24.64).525 (13.34).400 (10.16).090 (2.29) Size 10.760 (19.29).721 (18.31).760 (19.30).970 (24.64).525 (13.34).400 (10.16).090 (2.29) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 18 TERRAPIN SERIES

Receptacle SCE2-X-L1KXX-XXPX Inline Latching Receptacle, Integral Backshell Receptacle Shell Size ØF ØH ØJ K L M N Size 06.540 (13.71).399 (10.14).440 (11.18).902 (22.91).527 (13.39).330 (8.38).090 (2.29) Size 07.610 (15.50).447 (11.35).505 (12.83).902 (22.91).527 (13.39).330 (8.38).090 (2.29) Size 08.700 (17.77).581 (14.75).620 (15.75).902 (22.91).527 (13.39).330 (8.38).090 (2.29) Size 09.770 (19.56).651 (16.54).690 (17.53).972 (24.69).527 (13.39).400 (10.16).090 (2.29) Size 10.840 (21.34).721 (18.31).760 (19.30).972 (24.69).527 (13.39).400 (10.16).090 (2.29) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 19

Receptacle SCE2-X-01TXX-XXPX-003 Inline Receptacle, Threaded Backshell Receptacle Backshell ID Shell Size ØF K L T -003 Size 06.462 (11.73) 1.377 (34.98).674 (17.12).272 (6.91).185 (4.70) Size 07.575 (14.61) 1.377 (34.98).674 (17.12).272 (6.91).265 (6.73) Size 08.620 (15.75) 1.377 (34.98).674 (17.12).272 (6.91).345 (8.76) Size 09.690 (17.53) 1.447 (36.75).674 (17.12).272 (6.91).425 (10.80) Size 10.760 (19.30) 1.447 (36.75).674 (17.12).272 (6.91).505 (12.83) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 20 TERRAPIN SERIES

Receptacle SCE2-X-L1TXX-XXPX-003 Inline Latching Receptacle, Threaded Backshell Receptacle Backshell ID Shell Size ØF K L T -003 Size 06.540 (13.70) 1.379 (35.03).674 (17.12).465 (11.81).185 (4.70) Size 07.610 (15.50) 1.379 (35.03).674 (17.12).465 (11.81).265 (6.73) Size 08.700 (17.77) 1.379 (35.03).674 (17.12).465 (11.81).345 (8.76) Size 09.770 (19.56) 1.449 (36.80).674 (17.12).465 (11.81).425 (10.80) Size 10.840 (21.34) 1.470 (37.34).674 (17.12).465 (11.81).505 (12.83) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 21

Receptacle SCE2-X-07AXX-XXPX-XXX Rear Mount Jam Nut Receptacle Receptacle Shell Size ØF ØH ØJ K L M N P S A/F T Max Size 06.750 (19.05).462 (11.73).750 (19.05).835 (21.21).738 (18.75).055 (1.40).155 (3.94).170 (4.32).665 (16.88).157 (3.99) Size 07.895 (22.73).575 (14.61).895 (22.73).835 (21.21).738 (18.75).055 (1.40).155 (3.94).170 (4.32).750 (19.05).157 (3.99) Size 08.930 (23.62).620 (15.75).930 (23.62).835 (21.21).738 (18.75).055 (1.40).155 (3.94).170 (4.32).785 (19.94).157 (3.99) Size 09 1.000 (25.38).690 (17.53) 1.005 (25.53).905 (22.99).808 (20.52).N/A.155 (3.94).170 (4.32).863 (21.92).157 (3.99) Size 10 1.070 (27.18).760 (19.30) 1.080 (27.43).905 (22.99).808 (20.52).N/A.155 (3.94).170 (4.32).940 (23.88).157 (3.99) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 22 TERRAPIN SERIES

Receptacle SCE2-X-71AXX-XXPX-XXX Front Mount Receptacle, Threaded Receptacle Shell Size ØF ØJ ØH K L M N P S A/F T Size 06 N/A.531 (13.48).550 (13.97).677 (17.19) N/A.015 (0.38).113 (2.87).130 (3.30).470 (11.94) N/A Size 07.750 (19.04).575 (14.61).750 (19.04).677 (17.19).577 (14.65).015 (0.38).113 (2.87).130 (3.30).665 (16.89).100 (2.54) Size 08.760 (19.30).620 (15.75).760 (19.30).877 (22.28).677 (17.20).015 (0.38).113 (2.87).130 (3.30).825 (20.96).100 (2.54) Size 09.890 (22.61).690 (17.53).890 (22.61).947 (24.05).747 (18.97).N/A.113 (2.87).060 (1.52).955 (24.26).100 (2.54) Size 10.930 (23.62).760 (19.30).930 (23.62).947 (24.05).747 (18.97).N/A.113 (2.87).060 (1.52).995 (25.27).100 (2.54) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 23

Accessories Cap assembly part numbering Example: 390-5056-06-130-02 See Pages 25-28 for drawings (1101) deviation for aluminium caps with black zinc nickel plating finish Accessories 390 XXXX XX XXX XX Series identifier Cap style 5056 Metal cap to fit receptacles 5057 Metal cap to fit plugs 5063 Rubber cap to fit receptacles 5064 Rubber cap to fit plugs Shell size 06 07 08 09 10 Cord length in mm 070 130 180 210 Accessories 01 02 03 04 05 See table on pages 25-28 Heatshrink Boots Part number: 123GB-0798-XX-X-0 XX = shell size, for example: 06, 07, 08, 09, or 10 X = S for straight or R for right angled Braid Retention Strap Part number: 123GB-0799-0 Tooling available on request Castellated Panel Nut Add deviation (981) Tool: 390-5058-XXAXX-02 where XXAXX is shell style and size for which the tool is to fit e.g. 390-5058-76A06-02 24 TERRAPIN SERIES

Accessories 390-5056-XX-XXX-XX Metal Dust Cap Assembly for Receptacles Accessories Shell size Part number Item 1 Cap ØF K 06 390-5056-06-XXX-XX.575 (14.61).664 (16.87) 07 390-5056-07-XXX-XX.665 (16.89).664 (16.87) 08 390-5056-08-XXX-XX.750 (19.05).664 (16.87) 09 390-5056-09-XXX-XX.890 (22.60).764 (19.40) 10 390-5056-10-XXX-XX.900 (22.86).764 (19.40) Supplied with Part Item 5 Item 6 Item 7 number Eyelet Crimp ferrule Large eyelet 390-5056-XX-XXX-01 390-5056-XX-XXX-02 1 390-5056-XX-XXX-03 1 390-5056-XX-XXX-04 1 1 390-5056-XX-XXX-05 1 All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 25

Accessories 390-5057-XX-XXX-XX Metal Dust Cap Assembly for Plugs Accessories Shell size Part number Item 1 Cap ØF K 06 390-5057-06-XXX-XX.464 (11.79).794 (20.17) 07 390-5057-07-XXX-XX.545 (13.84).794 (20.17) 08 390-5057-08-XXX-XX.620 (15.75).794 (20.17) 09 390-5057-09-XXX-XX.695 (17.65).894 (22.70) 10 390-5057-10-XXX-XX.770 (19.56).894 (22.70) Supplied with Part Item 5 Item 6 Item 7 number Eyelet Crimp ferrule Large eyelet 390-5057-XX-XXX-01 390-5057-XX-XXX-02 1 390-5057-XX-XXX-03 1 390-5057-XX-XXX-04 1 1 390-5057-XX-XXX-05 1 All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 26 TERRAPIN SERIES

Accessories 390-5063-XX-XXX-XX Rubber Dust Cap Assembly for Receptacles Accessories Shell size Part number Item 1 Cap ØF K 06 390-5063-06-XXX-XX.625 (15.87).550 (13.97) 07 390-5063-07-XXX-XX.725 (18.42).550 (13.97) 08 390-5063-08-XXX-XX.780 (19.81).550 (13.97) 09 390-5063-09-XXX-XX.870 (22.09).550 (13.97) 10 390-5063-10-XXX-XX.940 (23.88).550 (13.97) Supplied with Part Item 5 Item 6 Item 7 number Eyelet Crimp ferrule Large eyelet 390-5063-XX-XXX-01 390-5063-XX-XXX-02 1 390-5063-XX-XXX-03 1 390-5063-XX-XXX-04 1 1 390-5063-XX-XXX-05 1 All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 27

Accessories 390-5064-XX-XXX-XX Rubber Dust Cap Assembly for Plugs Accessories Shell size Part number Item 1 Cap ØF K 06 390-5064-06-XXX-XX.450 (11.43).550 (13.97) 07 390-5064-07-XXX-XX.525 (13.34).550 (13.97) 08 390-5064-08-XXX-XX.595 (15.11).550 (13.97) 09 390-5064-09-XXX-XX.665 (16.89).550 (13.97) 10 390-5064-10-XXX-XX.735 (18.67).550 (13.97) Supplied with Part Item 5 Item 6 Item 7 number Eyelet Crimp ferrule Large eyelet 390-5064-XX-XXX-01 390-5064-XX-XXX-02 1 390-5064-XX-XXX-03 1 390-5064-XX-XXX-04 1 1 390-5064-XX-XXX-05 1 All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 28 TERRAPIN SERIES

Accessories Overmoulded cable harnesses using Terrapin connectors Accessories Amphenol Ltd design, prototype and manufacture a wide range of both standard and customised cable harness assemblies utilising overmould technology. The Terrapin connector range has been designed specifically to lend itself to this method of termination. Amphenol Ltd s capability in manufacturing is matched by our engineering expertise, we are able to offer a full design and development service from drawing conception to production delivery. Overmoulding has fast become widely recognised for the benefits it brings to equipments used in both military and harsh environment situations. Military/harsh environment situations Both standard and custom profile mouldings available In-house design and prototype facility Aesthetically uniform product Repeatable high complexity mouldings Low cost and repair by replacement Robust and tamper-proof Straight and angled mouldings Low profile mouldings Finger grips, logos and tactile indicators optional Mould material suitable for NBC washdown High degree of sealing IP68 Typical applications Chemical detection units Comms units Display Modules GPS Headsets Hubs LAN Switches Radios Routers Ruggedised laptops Sensor units Surveillance and rangefinders Weapons systems TERRAPIN SERIES 29

NEW Hermetic Sealing Accessories Terrapin connectors are often selected for their high degree of IP68 sealing to 20m immersion in water. However for greater sealing or for high temperature and high pressure environments, these connectors can also be supplied with a glass to metal hermetic seal. Glass to metal seals facilitate an excellent level of hermeticity greater than 10-9 cm 3 sec -1 at 1atm P Helium. Various shell and pin materials are available dependant on the application. NEW EMI Filtering Terrapin connectors are also available with embedded EMI filter circuits. Planar filtering technology further enhances the renowned EMC performance of the Terrapin range and has minimal impact on the physical size of the connectors. Connectors can be supplied with either standard or customised Pi, C or LC filter circuits. Embedding filtering eliminates the need for dirty areas or additional filter boards and circuitry within a box, resulting in weight and space savings. Filtering within the connector also enables a low impedance path between filter and ground, mechanically and environmentally protected circuits and increased reliability. The mechanical design of the Filtered Terrapin connectors ensure that equipment is protected from unwanted signals and noise as well as the ingress of dust and moisture. Pi filtering is achieved via dual capacitors with a single inductive element between them. This circuit arrangement provides excellent performance due to its sharp attenuation slope and is suitable for a variety of applications. The typical frequency response of these three different Pi circuits is shown based on a 50Ω source and load impedance. Attenuation (db) 80 70 60 50 40 30 20 10 0 0.1 1 10 100 1000 Frequency (MHz) 1nF 5nF 10nF How to order Contact factory for more information on part numbering and specification 30 TERRAPIN SERIES

Notes Products are sold subject to Amphenol's conditions of sale ( the standard conditions ). All specifications and statements contained herein are believed to be correct at the time of printing, but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement. TERRAPIN SERIES 31

Worldwide sales contacts BWC 4040 12/14 Europe Amphenol Ltd, UK Thanet Way, Whitstable Kent, CT5 3JF United Kingdom T: +44 1227 773 200 Amphenol Socapex, France 948, promenade de l Arve BP29 74311 Thyez Cedex France T: +33 4 50 89 28 00 Amphenol Air LB, France 10 rue champ Raymond 08110 Carignan France T: +33 3 24 22 32 70 Amphenol AIR LB GmbH, Germany Am Kleinbahnhof 4 66740 Saarlouis Germany T: +49 6831 981 00 Amphenol Nordic T: +46 702 129 200 Amphenol Switzerland and South Centre Switzerland, Slovenia,Serbia, Montenegro,Yugoslavia, Greece, Bulgaria 948, promenade de l Arve BP29 74311 Thyez Cedex France T: +33 4 50 89 28 00 Amphenol Italy Via Barbaiana n.5 20020 Lainate, Milano Italy T: +39 293 254 214 Amphenol Benelux Zadelmaker 121 NL 2401 PD Alphen aan den Rijn The Netherlands T: +31 172 444 903 Amphenol Iberica Edificio Burgosol, Oficina nr 55 Comunidad de Madrid, 35 bis Las Rozas (Madrid) Spain T: +34 91 640 73 06 Amphenol Poland and Central East Europe Austria, Poland, Czech Republic, Slovakia, Romania Wiener gasse 68 2380 Perchtoldsdorf Austria T: +43 699 10396 071 North America Amphenol PCD USA 72 Cherry Hill Drive Beverly, MA. 01915-1065 USA T: +1 978 624 3400 Amphenol Canada Corporation 605 Milner Avenue Toronto, Ontario Canada M1B 5X6 T: +1 416 291 4401 Asia Amphenol Daeshin, Korea 558 SongNae-2 Dong, SoSa-Gu, Bucheon City, Gyeonggi-do 422-040, Korea T: +82 32 610 3800 Amphenol Interconnect India Private Limited 105 Bhosari Industrial Area Pune 411 026 India T: +91 203 068 8304 Amphenol Japan 471-1 Deba, Ritto-City Shiga 520-3041 Japan T: +81 77 553 8501 Amphenol PCD CO Ltd, China Building 21, 1st Liao Keng Industrial Zone, Shi Yan Street Bao An District, Shenzhen 518108 China T: +86 755 8173 8000 Other areas Amphenol Argentina Av. Callao 930 2do piso Oficina B Plaza C1023 AAP, Buenos Aires Argentina T: +54 11 4815 6886 Amphenol Australia Pty Ltd 22 Industry Boulevard Carrum Downs, Victoria 3201 Australia Amphenol Do Brazil Rua Diogo Moreira 132, 20 andar, rooms 2001-2-3 CEP: 05423 010 Sao Paulo SP Brazil T: +55 11 3815 1003 Bar-Tec Ltd, Israel 3 Hagavish Street, K fir-barkan Bldg East Industrial Zone Kfar-Sava, 44102 Israel T: +972 9 764 4100 Amphenol Mexico Prolongacion Reforma 61-6 B2 Col Passo de las Lomas CP.013130 Mexico T: +52 55 5258 9984 Amphenol Russia Yaroslavskaja Street 8 129164 Moscow Russia T: +7 495 937 6341 Amphenol South Africa 30 Impala Road 2196 Chislehurston Sandton South Africa T: +27 11 783 9517 Amphenol Turkey Sun Plaza 15 Kat: 15 Maslak Hah. Bilim Sok. No.5 Sisli/Istanbul, 34398 Turkey T: +90 212 367 92 19 For more information call +44 (0)1227 773200 Amphenol Ltd Thanet Way Whitstable Kent CT5 3JF Email: terrapin@amphenol.co.uk www.amphenol.co.uk TERRAPIN SERIES 32 December 2014