KMPA200JU SERIES MPPT Solar Charger With Constant Current Driver Professional for the solar street light system MPPT efficiency 99.9% Constant current driving power: 100W(12V), 200W(24V) 3 Year Warranty Approvals: FEATURES Professional design to promote system reliability Using international well-know brand semiconductor device such as IR.TI.ST.ON.NXP and so on. Using industrial MCU total digital technology, without any adjustable resistance, strong anti-interference ability, no aging and drift. High LED driving and charging efficiency, significantly reduce the product temperature. IP68 protection degree without any buttons, further improve the waterproof reliability. High MPPT efficiency MPPT efficiency 99.9%, System efficiency is up to 98%, improve the system efficiency & reduces system costs. High Transfer efficiency Charging efficiency up to 98%. LED constant current drive efficiency up to 97.4% Minimal stand-by power consumption The current consumption 10mA after controller enters sleep mode. Intelligent battery management It is three phase time charge battery, which contains MPPT charge, constant voltage charge and float charge, which helps to extend the life time of battery. Significantly extends the battery lifetime up to 50% base on intelligent temperature compensation charge and discharge management.
Flexible parameter set Infrared wireless communications, connecting with computer. Excellent man-machine interface, convenient operation. Infrared wireless communications, connecting with a handheld remote control for easy installation. Perfect protect function Battery reverse connection protection. The solar panel reverse connection protection. To prevent the battery discharge to the solar panel at night. Battery low voltage disconnect protection. Battery reconnect voltage protection. The LED output short and open circuit protection. KMPA200JU-S012/024SP and KMPA360JU-S012/024SP have a human body induction. Θ : 60, H : 6 m, d : 7 m THE HUMAN BODY INDUCTION DISTANCE
SYSTEM When the sun light has growing at dawn, solar controller knows the morning, they turn off the LED lights, and starting MPPT tracking to the solar panels, also then charge the battery. In the afternoon, as the battery voltage is getting higher and higher, MPPT controller has constant voltage charging, in the evening, the charging current has smaller and smaller, and finally into the constant voltage float. As the light has weak and weak, the solar charger knows to stop charging and then drive LED, this means Discharging has entered to the first time period, they drive LED lights has as per the drive current at first time period; Then charging has enter to the second time period, they drive LED lights has according to the drive current at second time period; finally into the third time period, they drive LED has according o the third time period current, it can discharge to the third time period or dawn.
Battery parameters Panel parameters LED Parameters System Parameters Mechanical Parameters SPECIFICATION KMPA200JU-0S12/024P KMPA360JU-S012/024P Battery Type Lead-acid battery or lithium battery 1 - Battery Voltage 12/24V Manual Set - Max. charge current 10 15 A MPPT charge voltage 8~32 V Boost charge 14.4(12V), 28.8(24V) V Float charge 13.8(12V), 27.6(24V) 2 v Low voltage disconnect 11(12V), 22(24V) V Low voltage reconnect 12.5(12V), 25(24V) V Temp. compensation -4mV/ /2V2 - Panel Voltage 80 V Max Panel Power 120(12V),240(24V) 180(12V),360(24V) W MPPT tracking range 14 Vmp 75(12V) V 28 Vmp 75(24V) PV Voltage@ Lighting off 5 V Output Current Range 50~4000 ma Output Voltage Range 16~60V(12V), 32~60V(24V) V Max. Output Power 80(12V), 160(24V) W Output current error 3% - Dimmable phase time 5 - LED dimming range 0~100 % MPPT efficiency 99.9% - Max Charging efficiency 98.4%3 - Max LED constant current 97.4%4 - drive efficiency Consumption current 8 ma Communication Mode Infrared wireless / ZigBee - History Data 1 Y Save/Work Temperature -30~60 Save / Work Humidity 0~100% RH Altitude 3000 m Ingress protection IP68(1.5m,72h) - Compliance/Certification CE, RoHS - Weight 0.26 KG Mechanical Dimensions 100*82*20 mm Remarks: 1 Supports lithium iron phosphate, lithium manganese oxide, lithium cobalt oxide and lithium polymer batteries, lead-acid batteries are also supported 2 Lithium batteries do not need this parameter. 3 Test conditions: The battery voltage is 24V, solar panel voltage 30V (solar panels optimum operating point at 30V), charging power 100W 4 Test conditions: battery voltage 24V, output voltage 31V, output power 60W.
Charger Efficiency Curve 12V System 24V System
Discharge Efficiency Curve 12V System 24V System
Mechanical Specification KMPA200JU-S012/024P, KMPA360JU-S012/024Pseries installation dimension Weight: 50g Body Induction Mechanical Dimensions (mm)