Screw-on Dead Lock MAS 1074 Cylinder nickel-plated brass, reversible key made from nickel silver Rear plate and front plate are brass, brushed Connecting wood screws are nickel-plated brass 1 rosette type 1008A-25 1 mortise plate type 1012-15A 4 connecting screws M4x30 2 connecting wood screws M2.5x10 Screw-on bolt lock can be used with left or right doors as well as upper and lower drawers. 5 Kaba expert 9 Kaba gemini T 3 Kaba quattro 1 Kaba gemini Assembly / Drilling pattern E = Installation depth in mm *.MAS 1074.+.** 25,0 *.MAS 1074.30.+.** 30,0 *.MAS 1074.75.+.** 75,0 Cyl. length Installation depth Backset A = 25, 30, 35, 40, 45, 50, 55, 60*, 65, 70* or 75 mm E = 21, 26, 31, 36, 41, 46, 51, 56*, 61, 66* or 71 mm D = 25 mm P M K.1
Screw-on Latch Lock MAS 1075 Cylinder nickel-plated brass, reversible key made from nickel silver Rear plate and front plate, brushed brass Brass connecting wood screws 1 rosette type 1008A-25 1 mortise plate type 1075-6 4 connecting wood screws M4x30 2 connecting wood screws M2.5x10 Screw-on latch set can be used with left or right doors as well as upper and lower drawers. 5 Kaba expert 9 Kaba gemini T 3 Kaba quattro 1 Kaba gemini E = Installation depth in mm D = backset (25 mm) Assembly / Drilling pattern * System code number (1, 2, 3, 4, 5, 6, 9) *.MAS 1075.+.** 25,0 *.MAS 1075.30.+.** 30,0 *.MAS 1075.75.+.** 75,0 Cyl. length Installation depth Backset A = 25, 30, 35, 40, 45, 50, 55, 60*, 65, 70* or 75 mm E = 21, 26, 31, 36, 41, 46, 51, 56*, 61, 66* or 71 mm D = 25 mm P M K.2
Flush Dead Lock MAS 2006 Cylinder type 1008c, nickel plated brass, reversible key made from nickel silver Die cast base, nickel-plated, zinc-plated steel bolt ATTENTION! Screw-on rosettes are special accessories and are not included with the cylinder. Bolt lock for screw-on or insertion, available for left or right doors as well as upper and lower drawers. 5 Kaba expert 9 Kaba gemini T 3 Kaba quattro 1 Kaba gemini Spacer available upon request A = cylinder length in mm *.MAS 2006.+.** 25,0 *.MAS 2006.30.+.** 30,0 *.MAS 2006.75.+.** 75,0 ı Cyl. length A = 25, 30, 35, 40, 45, 50, 55, 60*, 65, 70* or 75 mm Installation depth E = 29.5, 34.5, 39.5, 44.5, 49.5, 54.5, 59.5, 64.5*, 69.5, 74.5* or 79.5 mm Accessories: 1008A-25 Rosette insert suitable for furniture cylinder Ø 22 mm 2006-4 Spacer 2 mm, nickel-plated brass P M K.3
Flush Dead Lock MAS 2006A Cylinder nickel-plated brass, reversible key made from nickel silver Die cast base, nickel-plated, zinc-plated steel bolt ATTENTION! Screw-on rosettes are special accessories and are not included with the cylinder. Screw-or or insertion bolt lock available for left or right doors as well as for upper and lower drawers. 5 Kaba expert 9 Kaba gemini T 3 Kaba quattro 1 Kaba gemini With variable bolt lengths Push bolt 10 mm Spacer available upon request A = Cylinder length in mm R = bolt length in mm *.MAS 2006A.#.+.** 25,0 *.MAS 2006A.#0.30.+.** 30,0 # Backset (30, 35, 40 or 50 mm) *.MAS 2006A.#.75.+.** 75,0 Cyl. length A = 25, 30, 35, 40, 45, 50, 55, 60*, 65, 70* or 75 mm Installation depth E = 29,5, 34,5, 39,5, 44,5, 49,5, 54,5, 59,5, 64,5*, 69.5, 74.5* or 79.5 mm Bolt length R = 30, 40, 50, 60, 80 or 100 mm Accessories: 1008A-25 Rosette insert suitable for furniture cylinder Ø 22 mm 2006-4 Spacer 2 mm, nickel-plated brass P M K4
Central Lock ZVS 2006 C/D/F Nickel-plated brass cylinder (type 1008c, see page K.96) Nickel-plated zinc die-cast plate Zinc-coated steel rod Reversible key made from nickel silver 1 spacer 3 rod screws 2 locking spikes Screw-on and insertion 5 Kaba expert 9 Kaba gemini T 3 Kaba quattro 1 Kaba gemini Rod lengths D: Type 2006C Type 2006D Type 2006F 600 mm 700 mm 1,000 mm D = 600 mm D = 700 mm D = 1000 mm 25 mm *.ZVS2006C.+.** *.ZVS2006D.+.** *.ZVS2006F.+.** 30 mm *.ZVS2006C.30.+.** *.ZVS2006D.30.+.** *.ZVS2006F.30.+.** ı ı ı 75 mm *.ZVS2006C.75.+.** *.ZVS2006D.75.+.** *.ZVS2006F.75.+.** + RE = right, LI = left OB = top drawer UN = bottom drawer Accessories 2006-4 Spacer 2 mm, nickel-plated brass 1008A-25 Rosette P M K.5
Central Lock ZVS 75-1-006 Nickel-plated brass cylinder (type XIII, see page K.11 Bare iron lock and tabs Reversible key made from nickel silver 3 ea. Fastening screws (more on request) This universal lock enables you to lock several drawers and pull-outs simultaneously. The desired height of the latch can be achieved by bending a sprocket of the central rod. Locking and closing is carried out with a complete key rotation (360 ). In this way, the key can also be removed in the open position. 5 Kaba expert 9 Kaba gemini T 3 Kaba quattro 1 Kaba gemini Cylinder length A = 25 mm Total length 430, 550, 670 or 790 mm *.ZV75-1-006.430.+.** *.ZV75-1-006.550.+.** Rod length 430 mm Rod length 550 mm + RE = right, LI = left *.ZV75-1-006.670.+.** Rod length 670 mm *.ZV75-1-006.790.+.** Rod length 790 mm P M K.6